Add SD boot support for LS1088ARDB
Signed-off-by: Prabhakar Kushwaha prabhakar.kushwaha@nxp.com Signed-off-by: Raghav Dogra raghav.dogra@nxp.com Signed-off-by: Ashish Kumar Ashish.Kumar@nxp.com --- arch/arm/Kconfig | 3 +++ configs/ls1088ardb_sdcard_qspi_defconfig | 31 ++++++++++++++++++++++++++ include/configs/ls1088a_common.h | 38 ++++++++++++++++++++++++++++++-- include/configs/ls1088ardb.h | 27 ++++++++++++++++++++++- 4 files changed, 96 insertions(+), 3 deletions(-) create mode 100644 configs/ls1088ardb_sdcard_qspi_defconfig
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index a5a5927..7091f9b 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -970,6 +970,9 @@ config TARGET_LS1088ARDB select ARCH_LS1088A select ARM64 select ARMV8_MULTIENTRY + select BOARD_LATE_INIT + select SUPPORT_SPL + select ARCH_MISC_INIT help Support for NXP LS1088ARDB platform. The LS1088AA Reference design board (RDB) is a high-performance diff --git a/configs/ls1088ardb_sdcard_qspi_defconfig b/configs/ls1088ardb_sdcard_qspi_defconfig new file mode 100644 index 0000000..6d610ab --- /dev/null +++ b/configs/ls1088ardb_sdcard_qspi_defconfig @@ -0,0 +1,31 @@ +CONFIG_ARM=y +CONFIG_TARGET_LS1088ARDB=y +# CONFIG_SYS_MALLOC_F is not set +CONFIG_DM_SPI=y +CONFIG_DM_SPI_FLASH=y +CONFIG_DEFAULT_DEVICE_TREE="fsl-ls1088a-rdb" +CONFIG_FIT=y +CONFIG_FIT_VERBOSE=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_SYS_EXTRA_OPTIONS="SD_BOOT, SD_BOOT_QSPI" +CONFIG_SPL=y + +CONFIG_HUSH_PARSER=y +CONFIG_CMD_MMC=y +CONFIG_CMD_SF=y +CONFIG_CMD_I2C=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_DHCP=y +CONFIG_CMD_PING=y +CONFIG_OF_CONTROL=y +CONFIG_NET_RANDOM_ETHADDR=y +CONFIG_DM=y +CONFIG_SPI_FLASH=y +CONFIG_NETDEVICES=y +CONFIG_E1000=y +CONFIG_SYS_NS16550=y +CONFIG_FSL_DSPI=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_SECTOR=y +CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x8b0 +CONFIG_SPL_BUILD=y +CONFIG_PARTITIONS=y diff --git a/include/configs/ls1088a_common.h b/include/configs/ls1088a_common.h index 35e806e..80f73d6 100644 --- a/include/configs/ls1088a_common.h +++ b/include/configs/ls1088a_common.h @@ -19,22 +19,27 @@ #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_FSL_OCRAM_BASE + 0xfff0)
/* We need architecture specific misc initializations */ -#define CONFIG_ARCH_MISC_INIT
/* Link Definitions */ +#ifdef CONFIG_SPL +#define CONFIG_SYS_TEXT_BASE 0x80400000 +#else #ifdef CONFIG_QSPI_BOOT #define CONFIG_SYS_TEXT_BASE 0x20100000 #else #define CONFIG_SYS_TEXT_BASE 0x30100000 #endif +#endif
#define CONFIG_SUPPORT_RAW_INITRD
#define CONFIG_SPI_FLASH_BAR #define CONFIG_SKIP_LOWLEVEL_INIT
+#if !defined(CONFIG_SD_BOOT) #define CONFIG_FSL_DDR_INTERACTIVE /* Interactive debugging */ +#endif
#define CONFIG_VERY_BIG_RAM #define CONFIG_SYS_DDR_SDRAM_BASE 0x80000000UL @@ -42,7 +47,7 @@ #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE #define CONFIG_SYS_DDR_BLOCK2_BASE 0x8080000000ULL #define CONFIG_SYS_FSL_DDR_MAIN_NUM_CTRLS 1 -#define CONFIG_BOARD_LATE_INIT + /* * SMP Definitinos */ @@ -184,6 +189,11 @@ unsigned long long get_qixis_addr(void); " fsl_mc apply dpl 0x80200000 &&" \ " sf read $kernel_load $kernel_start" \ " $kernel_size && bootm $kernel_load" +#elif defined(CONFIG_SD_BOOT) +#define CONFIG_BOOTCOMMAND "mmcinfo;mmc read 0x80200000 0x3800 0x800;"\ + " fsl_mc apply dpl 0x80200000 &&" \ + " mmc read $kernel_load $kernel_start" \ + " $kernel_size && bootm $kernel_load" #else #define CONFIG_BOOTCOMMAND "fsl_mc apply dpl 0x580700000 &&" \ " cp.b $kernel_start $kernel_load" \ @@ -203,6 +213,30 @@ unsigned long long get_qixis_addr(void);
#define CONFIG_PANIC_HANG /* do not reset board on panic */
+#ifdef CONFIG_SPL +#define CONFIG_SPL_BSS_START_ADDR 0x80100000 +#define CONFIG_SPL_BSS_MAX_SIZE 0x00100000 +#define CONFIG_SPL_DRIVERS_MISC_SUPPORT +#define CONFIG_SPL_ENV_SUPPORT +#define CONFIG_SPL_FRAMEWORK +#define CONFIG_SPL_I2C_SUPPORT +#define CONFIG_SPL_LDSCRIPT "arch/arm/cpu/armv8/u-boot-spl.lds" +#define CONFIG_SPL_LIBCOMMON_SUPPORT +#define CONFIG_SPL_LIBGENERIC_SUPPORT +#define CONFIG_SPL_MAX_SIZE 0x16000 +#define CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT +#define CONFIG_SPL_SERIAL_SUPPORT +#define CONFIG_SPL_STACK (CONFIG_SYS_FSL_OCRAM_BASE + 0x9ff0) +#define CONFIG_SPL_TARGET "u-boot-with-spl.bin" +#define CONFIG_SPL_TEXT_BASE 0x1800a000 +#ifdef CONFIG_SD_BOOT +#define CONFIG_SPL_MMC_SUPPORT +#endif + +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00100000 +#define CONFIG_SYS_SPL_MALLOC_START 0x80200000 +#define CONFIG_SYS_MONITOR_LEN (512 * 1024) +#endif #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
#endif /* __LS1088_COMMON_H */ diff --git a/include/configs/ls1088ardb.h b/include/configs/ls1088ardb.h index b842802..78808bc 100644 --- a/include/configs/ls1088ardb.h +++ b/include/configs/ls1088ardb.h @@ -9,7 +9,7 @@
#include "ls1088a_common.h"
-#ifdef CONFIG_QSPI_BOOT +#if defined(CONFIG_QSPI_BOOT) || defined(CONFIG_SD_BOOT_QSPI) #define CONFIG_DISPLAY_BOARDINFO_LATE #else #define CONFIG_DISPLAY_BOARDINFO @@ -279,6 +279,12 @@ #define CONFIG_CMD_MEMTEST #define CONFIG_SYS_MEMTEST_START 0x80000000 #define CONFIG_SYS_MEMTEST_END 0x9fffffff + +#ifdef CONFIG_SPL_BUILD +#define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE +#else +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE +#endif #define CONFIG_FSL_MEMAC
/* Initial environment variables */ @@ -299,6 +305,25 @@ "sf read 0x80100000 0x800000 0x100000;" \ "fsl_mc start mc 0x80000000 0x80100000\0" \ "mcmemsize=0x70000000 \0" +#elif defined(CONFIG_SD_BOOT) +#undef CONFIG_EXTRA_ENV_SETTINGS +#define CONFIG_EXTRA_ENV_SETTINGS \ + "hwconfig=fsl_ddr:bank_intlv=auto\0" \ + "loadaddr=0x90100000\0" \ + "kernel_addr=0x800\0" \ + "ramdisk_addr=0x800000\0" \ + "ramdisk_size=0x2000000\0" \ + "fdt_high=0xa0000000\0" \ + "initrd_high=0xffffffffffffffff\0" \ + "kernel_start=0x8800\0" \ + "kernel_load=0xa0000000\0" \ + "kernel_size=0x14000\0" \ + "mcinitcmd=mmcinfo;mmc read 0x80000000 0x1800 0x800;" \ + "mmc read 0x80100000 0x4000 0x800;" \ + "fsl_mc start mc 0x80000000 0x80100000\0" \ + "mcmemsize=0x70000000 \0" + + #else /* NOR_BOOT */ #undef CONFIG_EXTRA_ENV_SETTINGS #define CONFIG_EXTRA_ENV_SETTINGS \