Add DTE mode support via Kconfig on the MXC uart.
Signed-off-by: Ryan Harkin ryan.harkin@linaro.org Reviewed-by: Bryan O'Donoghue bryan.odonoghue@linaro.org --- drivers/serial/Kconfig | 7 +++++++ drivers/serial/serial_mxc.c | 10 ++++++++-- 2 files changed, 15 insertions(+), 2 deletions(-)
diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 122b8e7..0df57c0 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -597,4 +597,11 @@ config SYS_SDMR depends on MPC8XX_CONS default 0
+config SERIAL_MXC_DTE_MODE + bool "Use DTE mode for the MXC UART" + default n + help + This is used to set DTE mode on the serial console controlled by + serial_mxc.c. + endmenu diff --git a/drivers/serial/serial_mxc.c b/drivers/serial/serial_mxc.c index cce80a8..e7ea30c 100644 --- a/drivers/serial/serial_mxc.c +++ b/drivers/serial/serial_mxc.c @@ -111,6 +111,12 @@ #define TXTL 2 /* reset default */ #define RXTL 1 /* reset default */
+#ifdef CONFIG_SERIAL_MXC_DTE_MODE +#define MXC_DTE_MODE true +#else +#define MXC_DTE_MODE false +#endif + DECLARE_GLOBAL_DATA_PTR;
struct mxc_uart { @@ -189,7 +195,7 @@ static void mxc_serial_setbrg(void) if (!gd->baudrate) gd->baudrate = CONFIG_BAUDRATE;
- _mxc_serial_setbrg(mxc_base, clk, gd->baudrate, false); + _mxc_serial_setbrg(mxc_base, clk, gd->baudrate, MXC_DTE_MODE); }
static int mxc_serial_getc(void) @@ -367,7 +373,7 @@ static inline void _debug_uart_init(void)
_mxc_serial_init(base); _mxc_serial_setbrg(base, CONFIG_DEBUG_UART_CLOCK, - CONFIG_BAUDRATE, false); + CONFIG_BAUDRATE, MXC_DTE_MODE); }
static inline void _debug_uart_putc(int ch)