Synchronize device tree bindings with v5.5-rc6 tag with commit id "b3a987b".
Also, it removes older clock binding defined for S900.
Reviewed-by: Manivannan Sadhasivam manivannan.sadhasivam@linaro.org Signed-off-by: Amit Singh Tomar amittomer25@gmail.com --- Changes since v3: * Added Reviewed-by: tag. Changes since v2: * Newly added patch, not there in v2/v1. --- arch/arm/dts/s900.dtsi | 322 +++++++++++++++++++++++-- include/dt-bindings/clock/actions,s900-cmu.h | 129 ++++++++++ include/dt-bindings/clock/s900_cmu.h | 77 ------ include/dt-bindings/reset/actions,s900-reset.h | 65 +++++ 4 files changed, 495 insertions(+), 98 deletions(-) create mode 100644 include/dt-bindings/clock/actions,s900-cmu.h delete mode 100644 include/dt-bindings/clock/s900_cmu.h create mode 100644 include/dt-bindings/reset/actions,s900-reset.h
diff --git a/arch/arm/dts/s900.dtsi b/arch/arm/dts/s900.dtsi index 2bbb30a..eb35cf7 100644 --- a/arch/arm/dts/s900.dtsi +++ b/arch/arm/dts/s900.dtsi @@ -1,17 +1,94 @@ -// SPDX-License-Identifier: GPL-2.0+ -// -// Device Tree Source for Actions Semi S900 SoC -// -// Copyright (C) 2015 Actions Semi Co., Ltd. -// Copyright (C) 2018 Manivannan Sadhasivam manivannan.sadhasivam@linaro.org +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2017 Andreas Färber + */
-/dts-v1/; -#include <dt-bindings/clock/s900_cmu.h> +#include <dt-bindings/clock/actions,s900-cmu.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/reset/actions,s900-reset.h>
/ { compatible = "actions,s900"; - #address-cells = <0x2>; - #size-cells = <0x2>; + interrupt-parent = <&gic>; + #address-cells = <2>; + #size-cells = <2>; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu0: cpu@0 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x0>; + enable-method = "psci"; + }; + + cpu1: cpu@1 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x1>; + enable-method = "psci"; + }; + + cpu2: cpu@2 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x2>; + enable-method = "psci"; + }; + + cpu3: cpu@3 { + device_type = "cpu"; + compatible = "arm,cortex-a53"; + reg = <0x0 0x3>; + enable-method = "psci"; + }; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + secmon@1f000000 { + reg = <0x0 0x1f000000 0x0 0x1000000>; + no-map; + }; + }; + + psci { + compatible = "arm,psci-0.2"; + method = "smc"; + }; + + arm-pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>; + }; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 + (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + }; + + hosc: hosc { + compatible = "fixed-clock"; + clock-frequency = <24000000>; + #clock-cells = <0>; + };
losc: losc { compatible = "fixed-clock"; @@ -26,28 +103,231 @@ };
soc { - u-boot,dm-pre-reloc; compatible = "simple-bus"; - #address-cells = <0x2>; - #size-cells = <0x2>; + #address-cells = <2>; + #size-cells = <2>; ranges;
+ gic: interrupt-controller@e00f1000 { + compatible = "arm,gic-400"; + reg = <0x0 0xe00f1000 0x0 0x1000>, + <0x0 0xe00f2000 0x0 0x2000>, + <0x0 0xe00f4000 0x0 0x2000>, + <0x0 0xe00f6000 0x0 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-controller; + #interrupt-cells = <3>; + }; + + uart0: serial@e0120000 { + compatible = "actions,s900-uart", "actions,owl-uart"; + reg = <0x0 0xe0120000 0x0 0x2000>; + clocks = <&cmu CLK_UART0>; + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + uart1: serial@e0122000 { + compatible = "actions,s900-uart", "actions,owl-uart"; + reg = <0x0 0xe0122000 0x0 0x2000>; + clocks = <&cmu CLK_UART1>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + uart2: serial@e0124000 { + compatible = "actions,s900-uart", "actions,owl-uart"; + reg = <0x0 0xe0124000 0x0 0x2000>; + clocks = <&cmu CLK_UART2>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + uart3: serial@e0126000 { + compatible = "actions,s900-uart", "actions,owl-uart"; + reg = <0x0 0xe0126000 0x0 0x2000>; + clocks = <&cmu CLK_UART3>; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + uart4: serial@e0128000 { + compatible = "actions,s900-uart", "actions,owl-uart"; + reg = <0x0 0xe0128000 0x0 0x2000>; + clocks = <&cmu CLK_UART4>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + uart5: serial@e012a000 { - u-boot,dm-pre-reloc; - compatible = "actions,s900-serial"; - reg = <0x0 0xe012a000 0x0 0x1000>; - clocks = <&cmu CLOCK_UART5>; + compatible = "actions,s900-uart", "actions,owl-uart"; + reg = <0x0 0xe012a000 0x0 0x2000>; + clocks = <&cmu CLK_UART5>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; };
+ uart6: serial@e012c000 { + compatible = "actions,s900-uart", "actions,owl-uart"; + reg = <0x0 0xe012c000 0x0 0x2000>; + clocks = <&cmu CLK_UART6>; + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + sps: power-controller@e012e000 { + compatible = "actions,s900-sps"; + reg = <0x0 0xe012e000 0x0 0x2000>; + #power-domain-cells = <1>; + }; + cmu: clock-controller@e0160000 { - u-boot,dm-pre-reloc; compatible = "actions,s900-cmu"; reg = <0x0 0xe0160000 0x0 0x1000>; - clocks = <&losc>, <&diff24M>; - clock-names = "losc", "diff24M"; + clocks = <&hosc>, <&losc>; #clock-cells = <1>; + #reset-cells = <1>; + }; + + i2c0: i2c@e0170000 { + compatible = "actions,s900-i2c"; + reg = <0 0xe0170000 0 0x1000>; + clocks = <&cmu CLK_I2C0>; + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c1: i2c@e0172000 { + compatible = "actions,s900-i2c"; + reg = <0 0xe0172000 0 0x1000>; + clocks = <&cmu CLK_I2C1>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c2: i2c@e0174000 { + compatible = "actions,s900-i2c"; + reg = <0 0xe0174000 0 0x1000>; + clocks = <&cmu CLK_I2C2>; + interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c3: i2c@e0176000 { + compatible = "actions,s900-i2c"; + reg = <0 0xe0176000 0 0x1000>; + clocks = <&cmu CLK_I2C3>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c4: i2c@e0178000 { + compatible = "actions,s900-i2c"; + reg = <0 0xe0178000 0 0x1000>; + clocks = <&cmu CLK_I2C4>; + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + i2c5: i2c@e017a000 { + compatible = "actions,s900-i2c"; + reg = <0 0xe017a000 0 0x1000>; + clocks = <&cmu CLK_I2C5>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + pinctrl: pinctrl@e01b0000 { + compatible = "actions,s900-pinctrl"; + reg = <0x0 0xe01b0000 0x0 0x1000>; + clocks = <&cmu CLK_GPIO>; + gpio-controller; + gpio-ranges = <&pinctrl 0 0 146>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; + }; + + timer: timer@e0228000 { + compatible = "actions,s900-timer"; + reg = <0x0 0xe0228000 0x0 0x8000>; + interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "timer1"; + }; + + dma: dma-controller@e0260000 { + compatible = "actions,s900-dma"; + reg = <0x0 0xe0260000 0x0 0x1000>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + #dma-cells = <1>; + dma-channels = <12>; + dma-requests = <46>; + clocks = <&cmu CLK_DMAC>; + }; + + mmc0: mmc@e0330000 { + compatible = "actions,owl-mmc"; + reg = <0x0 0xe0330000 0x0 0x4000>; + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu CLK_SD0>; + resets = <&cmu RESET_SD0>; + dmas = <&dma 2>; + dma-names = "mmc"; + status = "disabled"; + }; + + mmc1: mmc@e0334000 { + compatible = "actions,owl-mmc"; + reg = <0x0 0xe0334000 0x0 0x4000>; + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu CLK_SD1>; + resets = <&cmu RESET_SD1>; + dmas = <&dma 3>; + dma-names = "mmc"; + status = "disabled"; + }; + + mmc2: mmc@e0338000 { + compatible = "actions,owl-mmc"; + reg = <0x0 0xe0338000 0x0 0x4000>; + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu CLK_SD2>; + resets = <&cmu RESET_SD2>; + dmas = <&dma 4>; + dma-names = "mmc"; + status = "disabled"; + }; + + mmc3: mmc@e033c000 { + compatible = "actions,owl-mmc"; + reg = <0x0 0xe033c000 0x0 0x4000>; + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cmu CLK_SD3>; + resets = <&cmu RESET_SD3>; + dmas = <&dma 46>; + dma-names = "mmc"; + status = "disabled"; }; }; }; - diff --git a/include/dt-bindings/clock/actions,s900-cmu.h b/include/dt-bindings/clock/actions,s900-cmu.h new file mode 100644 index 0000000..7c12515 --- /dev/null +++ b/include/dt-bindings/clock/actions,s900-cmu.h @@ -0,0 +1,129 @@ +// SPDX-License-Identifier: GPL-2.0+ +// +// Device Tree binding constants for Actions Semi S900 Clock Management Unit +// +// Copyright (c) 2014 Actions Semi Inc. +// Copyright (c) 2018 Linaro Ltd. + +#ifndef __DT_BINDINGS_CLOCK_S900_CMU_H +#define __DT_BINDINGS_CLOCK_S900_CMU_H + +#define CLK_NONE 0 + +/* fixed rate clocks */ +#define CLK_LOSC 1 +#define CLK_HOSC 2 + +/* pll clocks */ +#define CLK_CORE_PLL 3 +#define CLK_DEV_PLL 4 +#define CLK_DDR_PLL 5 +#define CLK_NAND_PLL 6 +#define CLK_DISPLAY_PLL 7 +#define CLK_DSI_PLL 8 +#define CLK_ASSIST_PLL 9 +#define CLK_AUDIO_PLL 10 + +/* system clock */ +#define CLK_CPU 15 +#define CLK_DEV 16 +#define CLK_NOC 17 +#define CLK_NOC_MUX 18 +#define CLK_NOC_DIV 19 +#define CLK_AHB 20 +#define CLK_APB 21 +#define CLK_DMAC 22 + +/* peripheral device clock */ +#define CLK_GPIO 23 + +#define CLK_BISP 24 +#define CLK_CSI0 25 +#define CLK_CSI1 26 + +#define CLK_DE0 27 +#define CLK_DE1 28 +#define CLK_DE2 29 +#define CLK_DE3 30 +#define CLK_DSI 32 + +#define CLK_GPU 33 +#define CLK_GPU_CORE 34 +#define CLK_GPU_MEM 35 +#define CLK_GPU_SYS 36 + +#define CLK_HDE 37 +#define CLK_I2C0 38 +#define CLK_I2C1 39 +#define CLK_I2C2 40 +#define CLK_I2C3 41 +#define CLK_I2C4 42 +#define CLK_I2C5 43 +#define CLK_I2SRX 44 +#define CLK_I2STX 45 +#define CLK_IMX 46 +#define CLK_LCD 47 +#define CLK_NAND0 48 +#define CLK_NAND1 49 +#define CLK_PWM0 50 +#define CLK_PWM1 51 +#define CLK_PWM2 52 +#define CLK_PWM3 53 +#define CLK_PWM4 54 +#define CLK_PWM5 55 +#define CLK_SD0 56 +#define CLK_SD1 57 +#define CLK_SD2 58 +#define CLK_SD3 59 +#define CLK_SENSOR 60 +#define CLK_SPEED_SENSOR 61 +#define CLK_SPI0 62 +#define CLK_SPI1 63 +#define CLK_SPI2 64 +#define CLK_SPI3 65 +#define CLK_THERMAL_SENSOR 66 +#define CLK_UART0 67 +#define CLK_UART1 68 +#define CLK_UART2 69 +#define CLK_UART3 70 +#define CLK_UART4 71 +#define CLK_UART5 72 +#define CLK_UART6 73 +#define CLK_VCE 74 +#define CLK_VDE 75 + +#define CLK_USB3_480MPLL0 76 +#define CLK_USB3_480MPHY0 77 +#define CLK_USB3_5GPHY 78 +#define CLK_USB3_CCE 79 +#define CLK_USB3_MAC 80 + +#define CLK_TIMER 83 + +#define CLK_HDMI_AUDIO 84 + +#define CLK_24M 85 + +#define CLK_EDP 86 + +#define CLK_24M_EDP 87 +#define CLK_EDP_PLL 88 +#define CLK_EDP_LINK 89 + +#define CLK_USB2H0_PLLEN 90 +#define CLK_USB2H0_PHY 91 +#define CLK_USB2H0_CCE 92 +#define CLK_USB2H1_PLLEN 93 +#define CLK_USB2H1_PHY 94 +#define CLK_USB2H1_CCE 95 + +#define CLK_DDR0 96 +#define CLK_DDR1 97 +#define CLK_DMM 98 + +#define CLK_ETH_MAC 99 +#define CLK_RMII_REF 100 + +#define CLK_NR_CLKS (CLK_RMII_REF + 1) + +#endif /* __DT_BINDINGS_CLOCK_S900_CMU_H */ diff --git a/include/dt-bindings/clock/s900_cmu.h b/include/dt-bindings/clock/s900_cmu.h deleted file mode 100644 index 2685a6d..0000000 --- a/include/dt-bindings/clock/s900_cmu.h +++ /dev/null @@ -1,77 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2015 Actions Semi Co., Ltd. - * Copyright (C) 2018 Manivannan Sadhasivam manivannan.sadhasivam@linaro.org - * - */ - -#ifndef _DT_BINDINGS_CLOCK_S900_CMU_H_ -#define _DT_BINDINGS_CLOCK_S900_CMU_H_ - -/* Module Clock ID */ -#define CLOCK_DDRCH1 0 -#define CLOCK_DMAC 1 -#define CLOCK_DDRCH0 2 -#define CLOCK_BROM 3 -#define CLOCK_NANDC0 4 -#define CLOCK_SD0 5 -#define CLOCK_SD1 6 -#define CLOCK_SD2 7 -#define CLOCK_DE 8 -#define CLOCK_LVDS 9 -#define CLOCK_EDP 10 -#define CLOCK_NANDC1 11 -#define CLOCK_DSI 12 -#define CLOCK_CSI0 13 -#define CLOCK_BISP 14 -#define CLOCK_CSI1 15 -#define CLOCK_SD3 16 -#define CLOCK_I2C4 17 -#define CLOCK_GPIO 18 -#define CLOCK_DMM 19 -#define CLOCK_I2STX 20 -#define CLOCK_I2SRX 21 -#define CLOCK_HDMIA 22 -#define CLOCK_SPDIF 23 -#define CLOCK_PCM0 24 -#define CLOCK_VDE 25 -#define CLOCK_VCE 26 -#define CLOCK_HDE 27 -#define CLOCK_SHARESRAM 28 -#define CLOCK_CMU_DDR1 29 -#define CLOCK_GPU3D 30 -#define CLOCK_CMUDDR0 31 -#define CLOCK_SPEED 32 -#define CLOCK_I2C5 33 -#define CLOCK_THERMAL 34 -#define CLOCK_HDMI 35 -#define CLOCK_PWM4 36 -#define CLOCK_PWM5 37 -#define CLOCK_UART0 38 -#define CLOCK_UART1 39 -#define CLOCK_UART2 40 -#define CLOCK_IRC 41 -#define CLOCK_SPI0 42 -#define CLOCK_SPI1 43 -#define CLOCK_SPI2 44 -#define CLOCK_SPI3 45 -#define CLOCK_I2C0 46 -#define CLOCK_I2C1 47 -#define CLOCK_PCM1 48 -#define CLOCK_IMX 49 -#define CLOCK_UART6 50 -#define CLOCK_UART3 51 -#define CLOCK_UART4 52 -#define CLOCK_UART5 53 -#define CLOCK_ETHERNET 54 -#define CLOCK_PWM0 55 -#define CLOCK_PWM1 56 -#define CLOCK_PWM2 57 -#define CLOCK_PWM3 58 -#define CLOCK_TIMER 59 -#define CLOCK_SE 60 -#define CLOCK_HDCP2TX 61 -#define CLOCK_I2C2 62 -#define CLOCK_I2C3 63 - -#endif diff --git a/include/dt-bindings/reset/actions,s900-reset.h b/include/dt-bindings/reset/actions,s900-reset.h new file mode 100644 index 0000000..42c19d0 --- /dev/null +++ b/include/dt-bindings/reset/actions,s900-reset.h @@ -0,0 +1,65 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +// +// Device Tree binding constants for Actions Semi S900 Reset Management Unit +// +// Copyright (c) 2018 Linaro Ltd. + +#ifndef __DT_BINDINGS_ACTIONS_S900_RESET_H +#define __DT_BINDINGS_ACTIONS_S900_RESET_H + +#define RESET_CHIPID 0 +#define RESET_CPU_SCNT 1 +#define RESET_SRAMI 2 +#define RESET_DDR_CTL_PHY 3 +#define RESET_DMAC 4 +#define RESET_GPIO 5 +#define RESET_BISP_AXI 6 +#define RESET_CSI0 7 +#define RESET_CSI1 8 +#define RESET_DE 9 +#define RESET_DSI 10 +#define RESET_GPU3D_PA 11 +#define RESET_GPU3D_PB 12 +#define RESET_HDE 13 +#define RESET_I2C0 14 +#define RESET_I2C1 15 +#define RESET_I2C2 16 +#define RESET_I2C3 17 +#define RESET_I2C4 18 +#define RESET_I2C5 19 +#define RESET_IMX 20 +#define RESET_NANDC0 21 +#define RESET_NANDC1 22 +#define RESET_SD0 23 +#define RESET_SD1 24 +#define RESET_SD2 25 +#define RESET_SD3 26 +#define RESET_SPI0 27 +#define RESET_SPI1 28 +#define RESET_SPI2 29 +#define RESET_SPI3 30 +#define RESET_UART0 31 +#define RESET_UART1 32 +#define RESET_UART2 33 +#define RESET_UART3 34 +#define RESET_UART4 35 +#define RESET_UART5 36 +#define RESET_UART6 37 +#define RESET_HDMI 38 +#define RESET_LVDS 39 +#define RESET_EDP 40 +#define RESET_USB2HUB 41 +#define RESET_USB2HSIC 42 +#define RESET_USB3 43 +#define RESET_PCM1 44 +#define RESET_AUDIO 45 +#define RESET_PCM0 46 +#define RESET_SE 47 +#define RESET_GIC 48 +#define RESET_DDR_CTL_PHY_AXI 49 +#define RESET_CMU_DDR 50 +#define RESET_DMM 51 +#define RESET_HDCP2TX 52 +#define RESET_ETHERNET 53 + +#endif /* __DT_BINDINGS_ACTIONS_S900_RESET_H */