On 1/17/20 5:32 PM, Patrick DELAUNAY wrote:
Hi Marek,
Hi,
From: Patrick DELAUNAY Sent: lundi 13 janvier 2020 15:05
Hi Marek,
From: Marek Vasut marex@denx.de Sent: vendredi 10 janvier 2020 01:29
Add support for DH Electronics DHCOM SoM and PDK2 rev. 400 carrier board. This is an SoM with STM32MP157C and an evaluation kit. The baseboard provides Ethernet, UART, USB, CAN and optional display. Signed-off-by: Marek Vasut marex@denx.de Cc: Patrick Delaunay patrick.delaunay@st.com Cc: Patrice Chotard patrice.chotard@st.com
For information, I merge the serie, except this patch 5/5 on master brach and I sent a pull request for u-boot-stm32-20200117.
For this patch, I propose a rebase and also many modification liked to my previous remark (I remove ST only parts for stboard command, and also led and key management) .
This proposal is present in the branch https://gitlab.denx.de/u-boot/custodians/u-boot-stm/tree/next https://gitlab.denx.de/u-boot/custodians/u-boot-stm/commit/db48e11b1eccf23f3...
your initial patch is in applied https://gitlab.denx.de/u-boot/custodians/u-boot-stm/tree/dh
Can you test the "next" branch and check the difference with your initial patch ( applied in dh branch https://gitlab.denx.de/u-boot/custodians/u-boot-stm/tree/dh => https://gitlab.denx.de/u-boot/custodians/u-boot-stm/commit/0ab3ce72f82b946ac... )
I hope that I don't remove something really present on the SOM.
If you are OK, can you send a V2 version with the "next" branch content and I will integrate it in master branch for next pull request.
Will do. I will rebase on master once your PR is in and then send V2.
[...]