Loading ATF is only supported from the R5, move the Kconfig symbol definition to match.
Signed-off-by: Andrew Davis afd@ti.com --- arch/arm/mach-k3/Kconfig | 7 ------- arch/arm/mach-k3/r5/Kconfig | 6 ++++++ 2 files changed, 6 insertions(+), 7 deletions(-)
diff --git a/arch/arm/mach-k3/Kconfig b/arch/arm/mach-k3/Kconfig index 03898424c95..45cf740bb1f 100644 --- a/arch/arm/mach-k3/Kconfig +++ b/arch/arm/mach-k3/Kconfig @@ -114,13 +114,6 @@ config K3_EARLY_CONS_IDX Use this option to set the index of the serial device to be used for the early console during SPL execution.
-config SYS_K3_SPL_ATF - bool "Start Cortex-A from SPL" - depends on CPU_V7R - help - Enabling this will try to start Cortex-A (typically with ATF) - after SPL from R5. - config K3_ATF_LOAD_ADDR hex "Load address of ATF image" default 0x70000000 diff --git a/arch/arm/mach-k3/r5/Kconfig b/arch/arm/mach-k3/r5/Kconfig index ae79f8ff6cd..317a6c4b67e 100644 --- a/arch/arm/mach-k3/r5/Kconfig +++ b/arch/arm/mach-k3/r5/Kconfig @@ -43,3 +43,9 @@ config K3_SYSFW_IMAGE_SPI_OFFS help Offset of the combined System Firmware and configuration image tree blob to be loaded when booting from a SPI flash memory. + +config SYS_K3_SPL_ATF + bool "Start Cortex-A from SPL" + help + Enabling this will try to start Cortex-A (typically with ATF) + after SPL from R5.