25 Aug
2012
25 Aug
'12
1:38 a.m.
On Tue, Aug 14, 2012 at 11:51:04AM +0200, Heiko Schocher wrote:
change the behaviour of switch initialization:
rename "pwl" to "lan" in hwconfig parameter "lan" = port 1 with phy addr 2 "lmn" = port 2 with phy addr 3
if we have a valid switch config file in flash, do not evaluate the settings in the hwconfig "lan" or "lmn" subcommand.
if we have no valid switch config file in flash, start the switch with default values, if we have a "lan" or a "lmn" hwconfig subcommand. If no "lan" or "lmn" is found in hwconfig, do nothing with the switch.
Signed-off-by: Heiko Schocher hs@denx.de
Queued to u-boot-ti/master, thanks!
--
Tom