[PATCH v2 1/5] ARM: dts: sun8i: Update V3s dts(i) files from Linux-v5.9

Update all V3s devicetree dts and dtsi files from Linux-v5.9.

Signed-off-by: Martin Cerveny m.cerveny@computer.org --- arch/arm/dts/sun8i-v3s-licheepi-zero.dts | 26 ++- arch/arm/dts/sun8i-v3s.dtsi | 200 ++++++++++++++++++++--- 2 files changed, 196 insertions(+), 30 deletions(-)

diff --git a/arch/arm/dts/sun8i-v3s-licheepi-zero.dts b/arch/arm/dts/sun8i-v3s-licheepi-zero.dts index 3d9168cbae..2e4587d26c 100644 --- a/arch/arm/dts/sun8i-v3s-licheepi-zero.dts +++ b/arch/arm/dts/sun8i-v3s-licheepi-zero.dts @@ -55,11 +55,29 @@ chosen { stdout-path = "serial0:115200n8"; }; + + leds { + compatible = "gpio-leds"; + + blue_led { + label = "licheepi:blue:usr"; + gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */ + }; + + green_led { + label = "licheepi:green:usr"; + gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */ + default-state = "on"; + }; + + red_led { + label = "licheepi:red:usr"; + gpios = <&pio 6 2 GPIO_ACTIVE_LOW>; /* PG2 */ + }; + }; };

&mmc0 { - pinctrl-0 = <&mmc0_pins_a>; - pinctrl-names = "default"; broken-cd; bus-width = <4>; vmmc-supply = <&reg_vcc3v3>; @@ -67,7 +85,7 @@ };

&uart0 { - pinctrl-0 = <&uart0_pins_a>; + pinctrl-0 = <&uart0_pb_pins>; pinctrl-names = "default"; status = "okay"; }; @@ -78,6 +96,6 @@ };

&usbphy { - usb0_id_det-gpio = <&pio 5 6 GPIO_ACTIVE_HIGH>; + usb0_id_det-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/dts/sun8i-v3s.dtsi b/arch/arm/dts/sun8i-v3s.dtsi index ebefc0fefe..e5312869c0 100644 --- a/arch/arm/dts/sun8i-v3s.dtsi +++ b/arch/arm/dts/sun8i-v3s.dtsi @@ -40,10 +40,9 @@ * OTHER DEALINGS IN THE SOFTWARE. */

+#include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/sun8i-v3s-ccu.h> #include <dt-bindings/reset/sun8i-v3s-ccu.h> -#include <dt-bindings/interrupt-controller/arm-gic.h> -#include <dt-bindings/pinctrl/sun4i-a10.h>

/ { #address-cells = <1>; @@ -62,6 +61,12 @@ }; };

+ de: display-engine { + compatible = "allwinner,sun8i-v3s-display-engine"; + allwinner,pipelines = <&mixer0>; + status = "disabled"; + }; + timer { compatible = "arm,armv7-timer"; interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, @@ -79,6 +84,7 @@ #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; + clock-accuracy = <50000>; clock-output-names = "osc24M"; };

@@ -86,7 +92,8 @@ #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <32768>; - clock-output-names = "osc32k"; + clock-accuracy = <50000>; + clock-output-names = "ext-osc32k"; }; };

@@ -96,7 +103,77 @@ #size-cells = <1>; ranges;

- mmc0: mmc@01c0f000 { + display_clocks: clock@1000000 { + compatible = "allwinner,sun8i-v3s-de2-clk"; + reg = <0x01000000 0x10000>; + clocks = <&ccu CLK_BUS_DE>, + <&ccu CLK_DE>; + clock-names = "bus", + "mod"; + resets = <&ccu RST_BUS_DE>; + #clock-cells = <1>; + #reset-cells = <1>; + }; + + mixer0: mixer@1100000 { + compatible = "allwinner,sun8i-v3s-de2-mixer"; + reg = <0x01100000 0x100000>; + clocks = <&display_clocks 0>, + <&display_clocks 6>; + clock-names = "bus", + "mod"; + resets = <&display_clocks 0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + mixer0_out: port@1 { + reg = <1>; + + mixer0_out_tcon0: endpoint { + remote-endpoint = <&tcon0_in_mixer0>; + }; + }; + }; + }; + + tcon0: lcd-controller@1c0c000 { + compatible = "allwinner,sun8i-v3s-tcon"; + reg = <0x01c0c000 0x1000>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_TCON0>, + <&ccu CLK_TCON0>; + clock-names = "ahb", + "tcon-ch0"; + clock-output-names = "tcon-pixel-clock"; + #clock-cells = <0>; + resets = <&ccu RST_BUS_TCON0>; + reset-names = "lcd"; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + tcon0_in: port@0 { + reg = <0>; + + tcon0_in_mixer0: endpoint { + remote-endpoint = <&mixer0_out_tcon0>; + }; + }; + + tcon0_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + }; + }; + }; + + + mmc0: mmc@1c0f000 { compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c0f000 0x1000>; clocks = <&ccu CLK_BUS_MMC0>, @@ -110,12 +187,14 @@ resets = <&ccu RST_BUS_MMC0>; reset-names = "ahb"; interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; };

- mmc1: mmc@01c10000 { + mmc1: mmc@1c10000 { compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c10000 0x1000>; clocks = <&ccu CLK_BUS_MMC1>, @@ -129,12 +208,14 @@ resets = <&ccu RST_BUS_MMC1>; reset-names = "ahb"; interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; status = "disabled"; #address-cells = <1>; #size-cells = <0>; };

- mmc2: mmc@01c11000 { + mmc2: mmc@1c11000 { compatible = "allwinner,sun7i-a20-mmc"; reg = <0x01c11000 0x1000>; clocks = <&ccu CLK_BUS_MMC2>, @@ -153,7 +234,7 @@ #size-cells = <0>; };

- usb_otg: usb@01c19000 { + usb_otg: usb@1c19000 { compatible = "allwinner,sun8i-h3-musb"; reg = <0x01c19000 0x0400>; clocks = <&ccu CLK_BUS_OTG>; @@ -166,7 +247,7 @@ status = "disabled"; };

- usbphy: phy@01c19400 { + usbphy: phy@1c19400 { compatible = "allwinner,sun8i-v3s-usb-phy"; reg = <0x01c19400 0x2c>, <0x01c1a800 0x4>; @@ -180,64 +261,93 @@ #phy-cells = <1>; };

- ccu: clock@01c20000 { + ccu: clock@1c20000 { compatible = "allwinner,sun8i-v3s-ccu"; reg = <0x01c20000 0x400>; - clocks = <&osc24M>, <&osc32k>; + clocks = <&osc24M>, <&rtc 0>; clock-names = "hosc", "losc"; #clock-cells = <1>; #reset-cells = <1>; };

- rtc: rtc@01c20400 { - compatible = "allwinner,sun6i-a31-rtc"; + rtc: rtc@1c20400 { + #clock-cells = <1>; + compatible = "allwinner,sun8i-v3-rtc"; reg = <0x01c20400 0x54>; interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc32k>; + clock-output-names = "osc32k", "osc32k-out"; };

- pio: pinctrl@01c20800 { + pio: pinctrl@1c20800 { compatible = "allwinner,sun8i-v3s-pinctrl"; reg = <0x01c20800 0x400>; interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&osc32k>; + clocks = <&ccu CLK_BUS_PIO>, <&osc24M>, <&rtc 0>; clock-names = "apb", "hosc", "losc"; gpio-controller; #gpio-cells = <3>; interrupt-controller; #interrupt-cells = <3>;

- uart0_pins_a: uart0@0 { + i2c0_pins: i2c0-pins { + pins = "PB6", "PB7"; + function = "i2c0"; + }; + + uart0_pb_pins: uart0-pb-pins { pins = "PB8", "PB9"; function = "uart0"; - bias-pull-up; };

- mmc0_pins_a: mmc0@0 { + mmc0_pins: mmc0-pins { pins = "PF0", "PF1", "PF2", "PF3", "PF4", "PF5"; function = "mmc0"; drive-strength = <30>; bias-pull-up; }; + + mmc1_pins: mmc1-pins { + pins = "PG0", "PG1", "PG2", "PG3", + "PG4", "PG5"; + function = "mmc1"; + drive-strength = <30>; + bias-pull-up; + }; + + spi0_pins: spi0-pins { + pins = "PC0", "PC1", "PC2", "PC3"; + function = "spi0"; + }; };

- timer@01c20c00 { - compatible = "allwinner,sun4i-a10-timer"; + timer@1c20c00 { + compatible = "allwinner,sun8i-v3s-timer"; reg = <0x01c20c00 0xa0>; interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; clocks = <&osc24M>; };

- wdt0: watchdog@01c20ca0 { + wdt0: watchdog@1c20ca0 { compatible = "allwinner,sun6i-a31-wdt"; reg = <0x01c20ca0 0x20>; interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc24M>; };

- uart0: serial@01c28000 { + lradc: lradc@1c22800 { + compatible = "allwinner,sun4i-a10-lradc-keys"; + reg = <0x01c22800 0x400>; + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + uart0: serial@1c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>; @@ -248,7 +358,7 @@ status = "disabled"; };

- uart1: serial@01c28400 { + uart1: serial@1c28400 { compatible = "snps,dw-apb-uart"; reg = <0x01c28400 0x400>; interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>; @@ -259,7 +369,7 @@ status = "disabled"; };

- uart2: serial@01c28800 { + uart2: serial@1c28800 { compatible = "snps,dw-apb-uart"; reg = <0x01c28800 0x400>; interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; @@ -270,8 +380,46 @@ status = "disabled"; };

- gic: interrupt-controller@01c81000 { - compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic"; + i2c0: i2c@1c2ac00 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x01c2ac00 0x400>; + interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_I2C0>; + resets = <&ccu RST_BUS_I2C0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + i2c1: i2c@1c2b000 { + compatible = "allwinner,sun6i-a31-i2c"; + reg = <0x01c2b000 0x400>; + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_I2C1>; + resets = <&ccu RST_BUS_I2C1>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + spi0: spi@1c68000 { + compatible = "allwinner,sun8i-h3-spi"; + reg = <0x01c68000 0x1000>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_SPI0>, <&ccu CLK_SPI0>; + clock-names = "ahb", "mod"; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins>; + resets = <&ccu RST_BUS_SPI0>; + status = "disabled"; + #address-cells = <1>; + #size-cells = <0>; + }; + + gic: interrupt-controller@1c81000 { + compatible = "arm,gic-400"; reg = <0x01c81000 0x1000>, <0x01c82000 0x1000>, <0x01c84000 0x2000>,