In message 47F3F98010FF784EBEE6526EAAB078D10635DED5@tq-mailsrv.tq-net.de you wrote:
I changed the boot delay in configs/smdk2410.h to -1 to make sure I could get the right port (swapping the cable around in case it wasn't uart 0 being used. I also tried 60 delay. Still nothing.
I am not really sure if the smdk2410 port is working at all at the moment.
It was some time ago, I last used the SMDK2410. But I'm pretty sure, that it prints some boot messages. You should see this messages regardles if you boot from flash, ethernet, or whatever.
I can only speak for the s3c2400 (trab, and most probably also smdk2400), which were broken by this commit:
commit 80767a6cead9990d9e77e62be947843c2c72f469 Author: Peter Pearse peter.pearse@arm.com Date: Wed Sep 5 16:04:41 2007 +0100
Changed API name to coloured_led.h Removed code using deprecated ifdef CONFIG_BOOTBINFUNC Tidied other cpu/arm920t/start.S code
You may want to try the commit previous to this one...
Best regards,
Wolfgang Denk