Hi Przemyslaw,
On 8 May 2015 at 10:20, Przemyslaw Marczak p.marczak@samsung.com wrote:
This commit adds emulation of sandbox PMIC device, which includes:
- PMIC I2C emulation driver
- PMIC I/O driver (UCLASS_PMIC)
- PMIC regulator driver (UCLASS_REGULATOR)
The sandbox PMIC has 12 significant registers and 4 as padding to 16 bytes, which allows using 'i2c md' command with the default count (16).
The sandbox PMIC provides regulators:
- 2x BUCK
- 2x LDO
Each, with adjustable output:
- Enable state
- Voltage
- Current limit (LDO1/BUCK1 only)
- Operation mode (different for BUCK and LDO)
Each attribute has it's own register, beside the enable state, which depends on operation mode.
The header file: sandbox_pmic.h includes PMIC's default register values, which are set on i2c pmic emul driver's probe() method.
Signed-off-by: Przemyslaw Marczak p.marczak@samsung.com
doc/device-tree-bindings/pmic/sandbox.txt | 35 +++ doc/device-tree-bindings/regulator/sandbox.txt | 45 ++++ drivers/power/pmic/Kconfig | 25 ++ drivers/power/pmic/Makefile | 3 +- drivers/power/pmic/i2c_pmic_emul.c | 145 ++++++++++ drivers/power/pmic/sandbox.c | 79 ++++++ drivers/power/regulator/Kconfig | 30 +++ drivers/power/regulator/Makefile | 1 + drivers/power/regulator/sandbox.c | 355 +++++++++++++++++++++++++ include/power/sandbox_pmic.h | 189 +++++++++++++ 10 files changed, 906 insertions(+), 1 deletion(-) create mode 100644 doc/device-tree-bindings/pmic/sandbox.txt create mode 100644 doc/device-tree-bindings/regulator/sandbox.txt create mode 100644 drivers/power/pmic/i2c_pmic_emul.c create mode 100644 drivers/power/pmic/sandbox.c create mode 100644 drivers/power/regulator/sandbox.c create mode 100644 include/power/sandbox_pmic.h
Acked-by: Simon Glass sjg@chromium.org Tested on sandbox: Tested-by: Simon Glass sjg@chromium.org
I expected i2c_pmic_emul to get its settings from the device tree too - is that not possible for some reason?
Regards, Simon