Hello Ayoub,
Am 20.04.2017 um 16:35 schrieb ayoub.zaki@embexus.com:
Hi Andy,
Thanks for the answer, I figured out what the problem is, in the fact I was using a zImage, using an uImage format solve the problem :-) It should maybe added to the documentation ;-)
Patches are welcome!
;-)
bye, Heiko
best regards,
Ayoub Zaki On 20 April 2017 at 16:31:21 +02:00, Andy Pont andy.pont@sdcsystems.com wrote:
Ayoub wrote...
=> run args_mmc => run loadimage 8942296 bytes read in 610 ms (14 MiB/s) => run loadfdt 58129 bytes read in 56 ms (1013.7 KiB/s) => spl export fdt ${loadaddr} - ${fdtaddr}
I have AM335x Falcon mode running with SPI flash (albeit an old 2014.xx U-Boot version) and the commands for settings it up look the same as the ones you have used.
Do you get any more information about where the data abort is coming from if you build and run U-Boot with #define DEBUG?
-Andy.
U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot