[U-Boot] [PATCH V2 1/8] ARM: dts: imx: dh-imx6: Import DHCOM iMX6 PDK2 DTs from Linux

Import DHCOM iMX6 PDK2 device tree from Linux 5.1.1 b724e9356404 . Enable DT control in full U-Boot .

Signed-off-by: Marek Vasut marex@denx.de Cc: Fabio Estevam fabio.estevam@nxp.com Cc: Ludwig Zenz lzenz@dh-electronics.com Cc: Stefano Babic sbabic@denx.de --- V2: No change --- arch/arm/dts/Makefile | 3 +- arch/arm/dts/imx6q-dhcom-pdk2.dts | 151 ++++++++++ arch/arm/dts/imx6q-dhcom-som.dtsi | 477 ++++++++++++++++++++++++++++++ configs/dh_imx6_defconfig | 3 +- 4 files changed, 632 insertions(+), 2 deletions(-) create mode 100644 arch/arm/dts/imx6q-dhcom-pdk2.dts create mode 100644 arch/arm/dts/imx6q-dhcom-som.dtsi

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 0ec7bc987d..98db403c7b 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -586,7 +586,8 @@ dtb-$(CONFIG_MX6ULL) += \ imx6ull-dart-6ul.dtb

dtb-$(CONFIG_ARCH_MX6) += \ - imx6-colibri.dtb + imx6-colibri.dtb \ + imx6q-dhcom-pdk2.dtb

dtb-$(CONFIG_MX7) += imx7d-sdb.dtb \ imx7d-sdb-qspi.dtb \ diff --git a/arch/arm/dts/imx6q-dhcom-pdk2.dts b/arch/arm/dts/imx6q-dhcom-pdk2.dts new file mode 100644 index 0000000000..9c61e3be2d --- /dev/null +++ b/arch/arm/dts/imx6q-dhcom-pdk2.dts @@ -0,0 +1,151 @@ +// SPDX-License-Identifier: (GPL-2.0+) +/* + * Copyright (C) 2015 DH electronics GmbH + * Copyright (C) 2018 Marek Vasut marex@denx.de + */ + +/dts-v1/; + +#include "imx6q-dhcom-som.dtsi" + +/ { + model = "Freescale i.MX6 Quad DHCOM Premium Developer Kit (2)"; + compatible = "dh,imx6q-dhcom-pdk2", "dh,imx6q-dhcom-som", "fsl,imx6q"; + + chosen { + stdout-path = &uart1; + }; + + clk_ext_audio_codec: clock-codec { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; + + sound { + compatible = "fsl,imx-audio-sgtl5000"; + model = "imx-sgtl5000"; + ssi-controller = <&ssi1>; + audio-codec = <&sgtl5000>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "LINE_IN", "Line In Jack", + "Headphone Jack", "HP_OUT"; + mux-int-port = <1>; + mux-ext-port = <3>; + }; +}; + +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux_ext>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c2 { + sgtl5000: codec@a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + #sound-dai-cells = <0>; + clocks = <&clk_ext_audio_codec>; + VDDA-supply = <&reg_3p3v>; + VDDIO-supply = <&reg_3p3v>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog_base &pinctrl_hog>; + + pinctrl_hog: hog-grp { + fsl,pins = < + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x400120b0 + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x400120b0 + MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x400120b0 + MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03 0x400120b0 + MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x120b0 + MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x400120b0 + MX6QDL_PAD_EIM_D27__GPIO3_IO27 0x120b0 + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x120b0 + MX6QDL_PAD_KEY_COL1__GPIO4_IO08 0x400120b0 + MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x400120b0 + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x400120b0 + MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x400120b0 + MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x400120b0 + MX6QDL_PAD_SD3_DAT4__GPIO7_IO01 0x400120b0 + MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x400120b0 + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x400120b0 + MX6QDL_PAD_SD1_CMD__GPIO1_IO18 0x400120b0 + MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x400120b0 + MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x400120b0 + MX6QDL_PAD_SD1_DAT2__GPIO1_IO19 0x400120b0 + MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x400120b0 + MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x400120b0 + MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19 0x400120b0 + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x400120b0 + >; + }; + + pinctrl_audmux_ext: audmux-ext-grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 + >; + }; + + pinctrl_enet_1G: enet-1G-grp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x000b0 + MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x000b1 + MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x000b1 + >; + }; + + pinctrl_pcie: pcie-grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b0b1 + >; + }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio6 14 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&ssi1 { + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&usdhc3 { + status = "okay"; +}; diff --git a/arch/arm/dts/imx6q-dhcom-som.dtsi b/arch/arm/dts/imx6q-dhcom-som.dtsi new file mode 100644 index 0000000000..387801dde0 --- /dev/null +++ b/arch/arm/dts/imx6q-dhcom-som.dtsi @@ -0,0 +1,477 @@ +// SPDX-License-Identifier: (GPL-2.0+) +/* + * Copyright (C) 2015 DH electronics GmbH + * Copyright (C) 2018 Marek Vasut marex@denx.de + */ + +#include "imx6q.dtsi" +#include <dt-bindings/pwm/pwm.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/clock/imx6qdl-clock.h> +#include <dt-bindings/input/input.h> + +/ { + aliases { + mmc0 = &usdhc2; + mmc1 = &usdhc3; + mmc2 = &usdhc4; + mmc3 = &usdhc1; + }; + + memory@10000000 { + device_type = "memory"; + reg = <0x10000000 0x40000000>; + }; + + reg_usb_otg_vbus: regulator-usb-otg-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_otg_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + reg_usb_h1_vbus: regulator-usb-h1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb_h1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_3p3v: regulator-3P3V { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "okay"; +}; + +&can2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "okay"; +}; + +&ecspi1 { + cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>, <&gpio4 11 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi1>; + status = "okay"; + + flash@0 { /* S25FL116K */ + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + spi-max-frequency = <50000000>; + reg = <0>; + m25p,fast-read; + }; +}; + +&ecspi2 { + cs-gpios = <&gpio5 29 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ecspi2>; + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet_100M>; + phy-mode = "rmii"; + phy-handle = <&ethphy0>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + + ethphy0: ethernet-phy@0 { /* SMSC LAN8710Ai */ + reg = <0>; + max-speed = <100>; + reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + reset-delay-us = <1000>; + reset-post-delay-us = <1000>; + }; + }; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + ltc3676: pmic@3c { + compatible = "lltc,ltc3676"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pmic_hw300>; + reg = <0x3c>; + interrupt-parent = <&gpio5>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + + regulators { + sw1_reg: sw1 { + regulator-min-microvolt = <787500>; + regulator-max-microvolt = <1527272>; + lltc,fb-voltage-divider = <100000 110000>; + regulator-suspend-mem-microvolt = <1040000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <1885714>; + regulator-max-microvolt = <3657142>; + lltc,fb-voltage-divider = <100000 28000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3_reg: sw3 { + regulator-min-microvolt = <787500>; + regulator-max-microvolt = <1527272>; + lltc,fb-voltage-divider = <100000 110000>; + regulator-suspend-mem-microvolt = <980000>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + sw4_reg: sw4 { + regulator-min-microvolt = <855571>; + regulator-max-microvolt = <1659291>; + lltc,fb-voltage-divider = <100000 93100>; + regulator-ramp-delay = <7000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1_reg: ldo1 { + regulator-min-microvolt = <3240306>; + regulator-max-microvolt = <3240306>; + lltc,fb-voltage-divider = <102000 29400>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2_reg: ldo2 { + regulator-min-microvolt = <2484708>; + regulator-max-microvolt = <2484708>; + lltc,fb-voltage-divider = <100000 41200>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + + touchscreen@49 { /* TSC2004 */ + compatible = "ti,tsc2004"; + reg = <0x49>; + vio-supply = <&reg_3p3v>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tsc2004_hw300>; + interrupts-extended = <&gpio4 14 IRQ_TYPE_EDGE_FALLING>; + status = "disabled"; + }; + + eeprom@50 { + compatible = "atmel,24c02"; + reg = <0x50>; + pagesize = <16>; + }; + + rtc@56 { + compatible = "rv3029c2"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_rtc_hw300>; + reg = <0x56>; + interrupt-parent = <&gpio7>; + interrupts = <12 2>; + }; +}; + +&iomuxc { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hog_base>; + + pinctrl_hog_base: hog-base-grp { + fsl,pins = < + MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x120b0 + MX6QDL_PAD_EIM_A23__GPIO6_IO06 0x120b0 + MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x120b0 + MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x120b0 + MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x120b0 + >; + }; + + pinctrl_ecspi1: ecspi1-grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1 + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1 + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1 + MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0 + MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0 + >; + }; + + pinctrl_ecspi2: ecspi2-grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__ECSPI2_MISO 0x100b1 + MX6QDL_PAD_CSI0_DAT9__ECSPI2_MOSI 0x100b1 + MX6QDL_PAD_CSI0_DAT8__ECSPI2_SCLK 0x100b1 + MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29 0x1b0b0 + >; + }; + + pinctrl_enet_100M: enet-100M-grp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0 + MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0 + MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0 + MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0 + MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0 + MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x000b0 + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x000b1 + MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x120b0 + >; + }; + + pinctrl_flexcan1: flexcan1-grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b0 + MX6QDL_PAD_GPIO_8__FLEXCAN1_RX 0x1b0b0 + >; + }; + + pinctrl_flexcan2: flexcan2-grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT0__FLEXCAN2_TX 0x1b0b0 + MX6QDL_PAD_SD3_DAT1__FLEXCAN2_RX 0x1b0b0 + >; + }; + + pinctrl_i2c1: i2c1-grp { + fsl,pins = < + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2-grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3-grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_pmic_hw300: pmic-hw300-grp { + fsl,pins = < + MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x1B0B0 + >; + }; + + pinctrl_rtc_hw300: rtc-hw300-grp { + fsl,pins = < + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x120B0 + >; + }; + + pinctrl_tsc2004_hw300: tsc2004-hw300-grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x120B0 + >; + }; + + pinctrl_uart1: uart1-grp { + fsl,pins = < + MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D20__UART1_RTS_B 0x1b0b1 + MX6QDL_PAD_EIM_D19__UART1_CTS_B 0x4001b0b1 + MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x4001b0b1 + MX6QDL_PAD_EIM_D24__GPIO3_IO24 0x4001b0b1 + MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x4001b0b1 + MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x4001b0b1 + >; + }; + + pinctrl_uart4: uart4-grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart5: uart5-grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT14__UART5_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT15__UART5_RX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT18__UART5_RTS_B 0x1b0b1 + MX6QDL_PAD_CSI0_DAT19__UART5_CTS_B 0x4001b0b1 + >; + }; + + pinctrl_usbh1: usbh1-grp { + fsl,pins = < + MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x120B0 + >; + }; + + pinctrl_usbotg: usbotg-grp { + fsl,pins = < + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 + >; + }; + + pinctrl_usdhc2: usdhc2-grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x120B0 + >; + }; + + pinctrl_usdhc3: usdhc3-grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_SD3_RST__GPIO7_IO08 0x120B0 + >; + }; + + pinctrl_usdhc4: usdhc4-grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 + >; + }; +}; + +&reg_arm { + vin-supply = <&sw3_reg>; +}; + +&reg_soc { + vin-supply = <&sw1_reg>; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + uart-has-rtscts; + dtr-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; + dsr-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>; + dcd-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>; + rng-gpios = <&gpio2 31 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&uart4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart4>; + status = "okay"; +}; + +&uart5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart5>; + uart-has-rtscts; + status = "okay"; +}; + +&usbh1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1>; + vbus-supply = <&reg_usb_h1_vbus>; + dr_mode = "host"; + status = "okay"; +}; + +&usbotg { + vbus-supply = <&reg_usb_otg_vbus>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + dr_mode = "otg"; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + cd-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>; + keep-power-in-suspend; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + cd-gpios = <&gpio7 8 GPIO_ACTIVE_LOW>; + fsl,wp-controller; + keep-power-in-suspend; + status = "disabled"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + non-removable; + bus-width = <8>; + no-1-8-v; + keep-power-in-suspend; + status = "okay"; +}; diff --git a/configs/dh_imx6_defconfig b/configs/dh_imx6_defconfig index deec9f6bad..9aa08bfbcf 100644 --- a/configs/dh_imx6_defconfig +++ b/configs/dh_imx6_defconfig @@ -36,6 +36,8 @@ CONFIG_CMD_USB_MASS_STORAGE=y CONFIG_CMD_CACHE=y CONFIG_CMD_TIME=y CONFIG_CMD_EXT4_WRITE=y +CONFIG_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="imx6q-dhcom-pdk2" CONFIG_ENV_IS_IN_SPI_FLASH=y CONFIG_DWC_AHSATA=y CONFIG_BOOTCOUNT_LIMIT=y @@ -63,4 +65,3 @@ CONFIG_USB_GADGET_PRODUCT_NUM=0xa4a5 CONFIG_CI_UDC=y CONFIG_USB_GADGET_DOWNLOAD=y CONFIG_IMX_WATCHDOG=y -CONFIG_OF_LIBFDT=y