Switch to use the IO-domain driver to configure IO-domain based on device tree instead of a setup_iodomain() function.
Signed-off-by: Jonas Karlman jonas@kwiboo.se Reviewed-by: Kever Yang kever.yang@rock-chips.com --- v2: - Collect r-b tag --- .../puma_rk3399/puma-rk3399.c | 21 ------------------- configs/puma-rk3399_defconfig | 1 + 2 files changed, 1 insertion(+), 21 deletions(-)
diff --git a/board/theobroma-systems/puma_rk3399/puma-rk3399.c b/board/theobroma-systems/puma_rk3399/puma-rk3399.c index 8b998ef45565..eeb8a99231e4 100644 --- a/board/theobroma-systems/puma_rk3399/puma-rk3399.c +++ b/board/theobroma-systems/puma_rk3399/puma-rk3399.c @@ -3,31 +3,10 @@ * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH */
-#include <dm.h> -#include <syscon.h> -#include <dm/pinctrl.h> -#include <asm/arch-rockchip/clock.h> -#include <asm/arch-rockchip/hardware.h> -#include <asm/arch-rockchip/grf_rk3399.h> #include "../common/common.h"
-static void setup_iodomain(void) -{ - const u32 GRF_IO_VSEL_GPIO4CD_SHIFT = 3; - struct rk3399_grf_regs *grf = - syscon_get_first_range(ROCKCHIP_SYSCON_GRF); - - /* - * Set bit 3 in GRF_IO_VSEL so PCIE_RST# works (pin GPIO4_C6). - * Linux assumes that PCIE_RST# works out of the box as it probes - * PCIe before loading the iodomain driver. - */ - rk_setreg(&grf->io_vsel, 1 << GRF_IO_VSEL_GPIO4CD_SHIFT); -} - int rockchip_early_misc_init_r(void) { - setup_iodomain(); setup_boottargets();
return 0; diff --git a/configs/puma-rk3399_defconfig b/configs/puma-rk3399_defconfig index 7e76ec5076f9..c2759e1a9520 100644 --- a/configs/puma-rk3399_defconfig +++ b/configs/puma-rk3399_defconfig @@ -66,6 +66,7 @@ CONFIG_GPIO_HOG=y CONFIG_SPL_GPIO_HOG=y CONFIG_ROCKCHIP_GPIO=y CONFIG_SYS_I2C_ROCKCHIP=y +CONFIG_ROCKCHIP_IODOMAIN=y CONFIG_MMC_DW=y CONFIG_MMC_DW_ROCKCHIP=y CONFIG_MMC_SDHCI=y