Concatenation of u-boot-spl.bin and u-boot.img for NXP layerscape platform SoC: LS1088A/LS2080A and their variants
This patch also depricates UBOOT_BINLOAD in favour of SPL_PAYLOAD
Signed-off-by: Ashish Kumar Ashish.Kumar@nxp.com ---
v2: This is v2 version of https://patchwork.ozlabs.org/patch/755904/
Also depricate UBOOT_BINLOAD
v3: Reverse the logic to check for PowerPC and use .bin format else use .img format
Makefile | 21 ++++++++++++++------- 1 file changed, 14 insertions(+), 7 deletions(-)
diff --git a/Makefile b/Makefile index a1a3aea..0666c72 100644 --- a/Makefile +++ b/Makefile @@ -1033,8 +1033,20 @@ u-boot.dis: u-boot ifdef CONFIG_TPL SPL_PAYLOAD := tpl/u-boot-with-tpl.bin else +ifeq ($(ARCH),powerpc) +ifdef CONFIG_OF_CONTROL +SPL_PAYLOAD := u-boot-dtb.bin +else SPL_PAYLOAD := u-boot.bin -endif +endif #ifdef CONFIG_OF_CONTROL +else +ifdef CONFIG_OF_CONTROL +SPL_PAYLOAD := u-boot-dtb.img +else +SPL_PAYLOAD := u-boot.img +endif #ifdef CONFIG_OF_CONTROL +endif #ifdef powerpc +endif #ifdef CONFIG_TPL
OBJCOPYFLAGS_u-boot-with-spl.bin = -I binary -O binary \ --pad-to=$(CONFIG_SPL_PAD_TO) @@ -1197,16 +1209,11 @@ MKIMAGEFLAGS_u-boot-spl.pbl = -n $(srctree)/$(CONFIG_SYS_FSL_PBL_RCW:"%"=%) \ spl/u-boot-spl.pbl: spl/u-boot-spl.bin FORCE $(call if_changed,mkimage)
-ifeq ($(ARCH),arm) -UBOOT_BINLOAD := u-boot.img -else -UBOOT_BINLOAD := u-boot.bin -endif
OBJCOPYFLAGS_u-boot-with-spl-pbl.bin = -I binary -O binary --pad-to=$(CONFIG_SPL_PAD_TO) \ --gap-fill=0xff
-u-boot-with-spl-pbl.bin: spl/u-boot-spl.pbl $(UBOOT_BINLOAD) FORCE +u-boot-with-spl-pbl.bin: spl/u-boot-spl.pbl $(SPL_PAYLOAD) FORCE $(call if_changed,pad_cat)
# PPC4xx needs the SPL at the end of the image, since the reset vector