From: Sonic Zhang sonic.zhang@analog.com
Board and config header files for bf609-ezkit support.
Signed-off-by: Bob Liu lliubbo@gmail.com Signed-off-by: Sonic Zhang sonic.zhang@analog.com --- MAINTAINERS | 3 +- board/bf609-ezkit/Makefile | 55 +++++++++++++ board/bf609-ezkit/bf609-ezkit.c | 67 +++++++++++++++ boards.cfg | 1 + include/configs/bf609-ezkit.h | 161 +++++++++++++++++++++++++++++++++++++ include/configs/bfin_adi_common.h | 12 ++-- 6 files changed, 292 insertions(+), 7 deletions(-) create mode 100644 board/bf609-ezkit/Makefile create mode 100644 board/bf609-ezkit/bf609-ezkit.c create mode 100644 include/configs/bf609-ezkit.h
diff --git a/MAINTAINERS b/MAINTAINERS index 28c052d..76368cf 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1214,7 +1214,7 @@ Yoshihiro Shimoda yoshihiro.shimoda.uh@renesas.com # Board CPU # #########################################################################
-Mike Frysinger vapier@gentoo.org +Sonic Zhang sonic.adi@gmail.com Blackfin Team u-boot-devel@blackfin.uclinux.org
BF506F-EZKIT BF506 @@ -1231,6 +1231,7 @@ Blackfin Team u-boot-devel@blackfin.uclinux.org BF538F-EZKIT BF538 BF548-EZKIT BF548 BF561-EZKIT BF561 + BF609-EZKIT BF609
M.Hasewinkel (MHA) info@ssv-embedded.de
diff --git a/board/bf609-ezkit/Makefile b/board/bf609-ezkit/Makefile new file mode 100644 index 0000000..0bb8fe6 --- /dev/null +++ b/board/bf609-ezkit/Makefile @@ -0,0 +1,55 @@ +# +# U-boot - Makefile +# +# Copyright (c) 2005-2008 Analog Device Inc. +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).o + +COBJS-y := $(BOARD).o +COBJS-$(CONFIG_BFIN_SOFT_SWITCH) += soft_switch.o + +SRCS := $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS-y)) +SOBJS := $(addprefix $(obj),$(SOBJS-y)) + +$(LIB): $(obj).depend $(OBJS) $(SOBJS) + $(call cmd_link_o_target, $(OBJS) $(SOBJS)) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak $(obj).depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/bf609-ezkit/bf609-ezkit.c b/board/bf609-ezkit/bf609-ezkit.c new file mode 100644 index 0000000..0388226 --- /dev/null +++ b/board/bf609-ezkit/bf609-ezkit.c @@ -0,0 +1,67 @@ +/* + * U-boot - main board file + * + * Copyright (c) 2008-2011 Analog Devices Inc. + * + * Licensed under the GPL-2 or later. + */ + +#include <common.h> +#include <netdev.h> +#include <asm/blackfin.h> +#include <asm/io.h> +#include <asm/portmux.h> +#include "soft_switch.h" + +int checkboard(void) +{ + printf("Board: ADI BF609 EZ-Kit board\n"); + printf(" Support: http://blackfin.uclinux.org/%5Cn"); + return 0; +} + +int board_early_init_f(void) +{ + static const unsigned short pins[] = { + P_A3, P_A4, P_A5, P_A6, P_A7, P_A8, P_A9, P_A10, P_A11, P_A12, + P_A13, P_A14, P_A15, P_A16, P_A17, P_A18, P_A19, P_A20, P_A21, + P_A22, P_A23, P_A24, P_A25, P_NORCK, 0, + }; + peripheral_request_list(pins, "smc0"); + + return 0; +} + +#ifdef CONFIG_DESIGNWARE_ETH +int board_eth_init(bd_t *bis) +{ + int ret = 0; + + if (CONFIG_DW_PORTS & 1) { + static const unsigned short pins[] = P_RMII0; + if (!peripheral_request_list(pins, "emac0")) + ret += designware_initialize(0, EMAC0_MACCFG, 1, 0); + } + if (CONFIG_DW_PORTS & 2) { + static const unsigned short pins[] = P_RMII1; + if (!peripheral_request_list(pins, "emac1")) + ret += designware_initialize(1, EMAC1_MACCFG, 1, 0); + } + + return ret; +} +#endif + +#ifdef CONFIG_BFIN_SDH +int board_mmc_init(bd_t *bis) +{ + return bfin_mmc_init(bis); +} +#endif + +/* miscellaneous platform dependent initialisations */ +int misc_init_r(void) +{ + printf("other init\n"); + return setup_board_switches(); +} diff --git a/boards.cfg b/boards.cfg index e4b0d44..11060c4 100644 --- a/boards.cfg +++ b/boards.cfg @@ -356,6 +356,7 @@ bf538f-ezkit blackfin blackfin bf548-ezkit blackfin blackfin bf561-acvilon blackfin blackfin bf561-ezkit blackfin blackfin +bf609-ezkit blackfin blackfin blackstamp blackfin blackfin blackvme blackfin blackfin br4 blackfin blackfin diff --git a/include/configs/bf609-ezkit.h b/include/configs/bf609-ezkit.h new file mode 100644 index 0000000..6dffab8 --- /dev/null +++ b/include/configs/bf609-ezkit.h @@ -0,0 +1,161 @@ +/* + * U-boot - Configuration file for BF609 EZ-Kit board + */ + +#ifndef __CONFIG_BF609_EZKIT_H__ +#define __CONFIG_BF609_EZKIT_H__ + +#include <asm/config-pre.h> + +/* + * Processor Settings + */ +#define CONFIG_BFIN_CPU bf609-0.0 +#define CONFIG_BFIN_BOOT_MODE BFIN_BOOT_PARA + + +/* For ez-board version 1.0, else undef this */ +#define CONFIG_BFIN_BOARD_VERSION_1_0 + +/* + * Clock Settings + * CCLK = (CLKIN * VCO_MULT) / CCLK_DIV + * SCLK = (CLKIN * VCO_MULT) / SYSCLK_DIV + * SCLK0 = SCLK / SCLK0_DIV + * SCLK1 = SCLK / SCLK1_DIV + */ +/* CONFIG_CLKIN_HZ is any value in Hz */ +#define CONFIG_CLKIN_HZ (25000000) +/* CLKIN_HALF controls the DF bit in PLL_CTL 0 = CLKIN */ +/* 1 = CLKIN / 2 */ +#define CONFIG_CLKIN_HALF (0) + +/* VCO_MULT controls the MSEL (multiplier) bits in PLL_CTL */ +/* Values can range from 0-127 (where 0 means 128) */ +#define CONFIG_VCO_MULT (20) + +/* CCLK_DIV controls the core clock divider */ +/* Values can range from 0-31 (where 0 means 32) */ +#define CONFIG_CCLK_DIV (1) +/* SCLK_DIV controls the system clock divider */ +/* Values can range from 0-31 (where 0 means 32) */ +#define CONFIG_SCLK_DIV (4) +/* Values can range from 0-7 (where 0 means 8) */ +#define CONFIG_SCLK0_DIV (1) +#define CONFIG_SCLK1_DIV (1) +/* DCLK_DIV controls the DDR clock divider */ +/* Values can range from 0-31 (where 0 means 32) */ +#define CONFIG_DCLK_DIV (2) +/* OCLK_DIV controls the output clock divider */ +/* Values can range from 0-127 (where 0 means 128) */ +#define CONFIG_OCLK_DIV (16) + +/* + * Memory Settings + */ +#define CONFIG_MEM_SIZE 128 + +#define CONFIG_SMC_GCTL_VAL 0x00000010 +#define CONFIG_SMC_B0CTL_VAL 0x01007011 +#define CONFIG_SMC_B0TIM_VAL 0x08170977 +#define CONFIG_SMC_B0ETIM_VAL 0x00092231 + +#define CONFIG_SYS_MONITOR_LEN (768 * 1024) +#define CONFIG_SYS_MALLOC_LEN (512 * 1024) + +/* + * Network Settings + */ +#define ADI_CMDS_NETWORK +#define CONFIG_NETCONSOLE +#define CONFIG_NET_MULTI +#define CONFIG_HOSTNAME "bf609-ezkit" +#define CONFIG_DESIGNWARE_ETH +#define CONFIG_DW_PORTS 1 +#define CONFIG_DW_AUTONEG +#define CONFIG_DW_ALTDESCRIPTOR +#define CONFIG_CMD_NET +#define CONFIG_CMD_MII +#define CONFIG_MII + +/* i2c Settings */ +#define CONFIG_BFIN_TWI_I2C +#define CONFIG_HARD_I2C + +/* + * Flash Settings + */ +#undef CONFIG_CMD_IMLS +#undef CONFIG_CMD_JFFS2 +#define CONFIG_SYS_FLASH_CFI_WIDTH 2 +#define CONFIG_FLASH_CFI_DRIVER +#define CONFIG_SYS_FLASH_BASE 0xb0000000 +#define CONFIG_SYS_FLASH_CFI +#define CONFIG_SYS_FLASH_PROTECTION +#define CONFIG_SYS_MAX_FLASH_BANKS 1 +#define CONFIG_SYS_MAX_FLASH_SECT 131 +#define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS + +/* + * SPI Settings + */ +#define CONFIG_BFIN_SPI6XX +#define CONFIG_ENV_SPI_MAX_HZ 25000000 +#define CONFIG_SF_DEFAULT_SPEED 25000000 +#define CONFIG_SPI_FLASH +#define CONFIG_SPI_FLASH_ALL + +/* + * Env Storage Settings + */ +#if (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_SPI_MASTER) +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_OFFSET 0x10000 +#define CONFIG_ENV_SIZE 0x2000 +#define CONFIG_ENV_SECT_SIZE 0x10000 +#define CONFIG_ENV_IS_EMBEDDED_IN_LDR +#elif (CONFIG_BFIN_BOOT_MODE == BFIN_BOOT_NAND) +#define CONFIG_ENV_IS_IN_NAND +#define CONFIG_ENV_OFFSET 0x60000 +#define CONFIG_ENV_SIZE 0x20000 +#else +#define CONFIG_ENV_IS_IN_FLASH +#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET) +#define CONFIG_ENV_OFFSET 0x8000 +#define CONFIG_ENV_SIZE 0x8000 +#define CONFIG_ENV_SECT_SIZE 0x8000 +#define CONFIG_ENV_IS_EMBEDDED_IN_LDR +#endif + +#define FLASHBOOT_ENV_SETTINGS "flashboot=bootm 0xB0100000\0" + +/* + * SDH Settings + */ +#define CONFIG_GENERIC_MMC +#define CONFIG_MMC +#define CONFIG_BFIN_SDH + +/* + * Misc Settings + */ +#define CONFIG_BOARD_EARLY_INIT_F +#define CONFIG_UART_CONSOLE 0 + +#define CONFIG_CMD_MEMORY + +#define CONFIG_SYS_MEMTEST_END (CONFIG_STACKBASE - 20*1024*1024 + 4) +#define CONFIG_BFIN_SOFT_SWITCH + +#if 0 +#define CONFIG_UART_MEM 1024 +#undef CONFIG_UART_CONSOLE +#undef CONFIG_JTAG_CONSOLE +#undef CONFIG_UART_CONSOLE_IS_JTAG +#endif + +/* + * Pull in common ADI header for remaining command/environment setup + */ +#include <configs/bfin_adi_common.h> +#endif diff --git a/include/configs/bfin_adi_common.h b/include/configs/bfin_adi_common.h index ccdec0d..ada03f0 100644 --- a/include/configs/bfin_adi_common.h +++ b/include/configs/bfin_adi_common.h @@ -10,7 +10,7 @@ */ #ifndef _CONFIG_CMD_DEFAULT_H # include <config_cmd_default.h> -# if ADI_CMDS_NETWORK +# ifdef ADI_CMDS_NETWORK # define CONFIG_CMD_DHCP # define CONFIG_BOOTP_SUBNETMASK # define CONFIG_BOOTP_GATEWAY @@ -58,7 +58,7 @@ # endif # ifdef CONFIG_RTC_BFIN # define CONFIG_CMD_DATE -# if ADI_CMDS_NETWORK +# ifdef ADI_CMDS_NETWORK # define CONFIG_CMD_SNTP # endif # endif @@ -193,10 +193,10 @@ "nand erase 0 0x40000;" \ "nand write $(loadaddr) 0 0x40000" # else -# define UBOOT_ENV_UPDATE \ - "protect off 0x20000000 +$(filesize);" \ - "erase 0x20000000 +$(filesize);" \ - "cp.b $(loadaddr) 0x20000000 $(filesize)" +# define UBOOT_ENV_UPDATE \ + "protect off " MK_STR(CONFIG_SYS_FLASH_BASE) " +$(filesize);" \ + "erase " MK_STR(CONFIG_SYS_FLASH_BASE) " +$(filesize);" \ + "cp.b $(loadaddr)" MK_STR(CONFIG_SYS_FLASH_BASE) " $(filesize)" # endif # ifdef CONFIG_NETCONSOLE # define NETCONSOLE_ENV \