
5 Jun
2020
5 Jun
'20
4:23 a.m.
On 2020/6/4 下午6:09, Heiko Stuebner wrote:
From: Heiko Stuebner heiko.stuebner@theobroma-systems.com
Tabs not spaces, so transform it to the common styling.
Signed-off-by: Heiko Stuebner heiko.stuebner@theobroma-systems.com Reviewed-by: Philipp Tomsich philipp.tomsich@theobroma-systems.com
Reviewed-by: Kever Yang kever.yang@rock-chips.com
Thanks, - Kever
arch/arm/dts/rk3399-puma-u-boot.dtsi | 30 ++++++++++++++-------------- 1 file changed, 15 insertions(+), 15 deletions(-)
diff --git a/arch/arm/dts/rk3399-puma-u-boot.dtsi b/arch/arm/dts/rk3399-puma-u-boot.dtsi index 3ad1139833..ddb5fa6e76 100644 --- a/arch/arm/dts/rk3399-puma-u-boot.dtsi +++ b/arch/arm/dts/rk3399-puma-u-boot.dtsi @@ -2,24 +2,24 @@
#include "rk3399-u-boot.dtsi" / {
config {
u-boot,spl-payload-offset = <0x40000>; /* @ 256KB */
u-boot,mmc-env-offset = <0x4000>; /* @ 16KB */
u-boot,efi-partition-entries-offset = <0x200000>; /* 2MB */
u-boot,boot-led = "module_led";
sysreset-gpio = <&gpio1 RK_PA6 GPIO_ACTIVE_HIGH>;
};
- config {
u-boot,spl-payload-offset = <0x40000>; /* @ 256KB */
u-boot,mmc-env-offset = <0x4000>; /* @ 16KB */
u-boot,efi-partition-entries-offset = <0x200000>; /* 2MB */
u-boot,boot-led = "module_led";
sysreset-gpio = <&gpio1 RK_PA6 GPIO_ACTIVE_HIGH>;
- };
chosen {
stdout-path = "serial0:115200n8";
u-boot,spl-boot-order = \
- chosen {
stdout-path = "serial0:115200n8";
u-boot,spl-boot-order = \ "same-as-spl", &norflash, &sdhci, &sdmmc;
};
- };
aliases {
spi0 = &spi1;
spi1 = &spi5;
};
aliases {
spi0 = &spi1;
spi1 = &spi5;
};
/*
- The Qseven BIOS_DISABLE signal on the RK3399-Q7 keeps the on-module