Use list tables to map up the dip switch settings
Signed-off-by: Nishanth Menon nm@ti.com --- Changes since V1 * No Change
V1: https://lore.kernel.org/all/20230727080027.2817701-12-nm@ti.com/
doc/board/ti/j7200_evm.rst | 37 ++++++++++++++++++++++++++----------- 1 file changed, 26 insertions(+), 11 deletions(-)
diff --git a/doc/board/ti/j7200_evm.rst b/doc/board/ti/j7200_evm.rst index 4786dc19d0d8..883e39949961 100644 --- a/doc/board/ti/j7200_evm.rst +++ b/doc/board/ti/j7200_evm.rst @@ -143,18 +143,33 @@ The following table shows some common boot modes used on J7200 platform. More details can be found in the Technical Reference Manual: https://www.ti.com/lit/pdf/spruiu1 under the `Boot Mode Pins` section.
+.. list-table:: Boot Modes + :widths: 16 16 16 + :header-rows: 1
-*Boot Modes* - -============ ============= ============= -Switch Label SW9: 12345678 SW8: 12345678 -============ ============= ============= -SD 00000000 10000010 -EMMC 01000000 10000000 -OSPI 01000000 00000110 -UART 01110000 00000000 -USB DFU 00100000 10000000 -============ ============= ============= + * - Switch Label + - SW9: 12345678 + - SW8: 12345678 + + * - SD + - 00000000 + - 10000010 + + * - EMMC + - 01000000 + - 10000000 + + * - OSPI + - 01000000 + - 00000110 + + * - UART + - 01110000 + - 00000000 + + * - USB DFU + - 00100000 + - 10000000
For SW8 and SW9, the switch state in the "ON" position = 1.