On Sat, 24 Jan 2009 00:36:34 +0100 Wolfgang Denk wd@denx.de wrote:
Dear Heiko Schocher,
In message 4925268B.2020907@denx.de you wrote:
This patch adds support for the kmeter1 board from Keymile, based on a Freescale MPC8360 CPU.
- serial console on UART 1
- 256 MB DDR2 RAM
- 64 MB NOR Flash
- Ethernet RMII Mode over UCC4
- PHY SMSC LAN8700
Signed-off-by: Heiko Schocher hs@denx.de
changes since v2:
added comments from Kim Philips added doc/README.kmeter1
MAINTAINERS | 1 + MAKEALL | 1 + Makefile | 3 + board/keymile/kmeter1/Makefile | 51 ++++ board/keymile/kmeter1/config.mk | 24 ++ board/keymile/kmeter1/kmeter1.c | 153 ++++++++++++ doc/README.kmeter1 | 91 +++++++ include/configs/kmeter1.h | 523 +++++++++++++++++++++++++++++++++++++++ 8 files changed, 847 insertions(+), 0 deletions(-) create mode 100644 board/keymile/kmeter1/Makefile create mode 100644 board/keymile/kmeter1/config.mk create mode 100644 board/keymile/kmeter1/kmeter1.c create mode 100644 doc/README.kmeter1 create mode 100644 include/configs/kmeter1.h
Applied, thanks.
eh? this is sitting in u-boot-mpc83xx.git next - I was going to ask you to pull soon.
Kim