Add TPL binaries to the device x86 binman desciption. When enabled, TPL will start first, doing the 16-bit init, then jump to SPL and finally U-Boot proper.
Signed-off-by: Simon Glass sjg@chromium.org ---
arch/x86/dts/u-boot.dtsi | 26 ++++++++++++++++++++++++-- 1 file changed, 24 insertions(+), 2 deletions(-)
diff --git a/arch/x86/dts/u-boot.dtsi b/arch/x86/dts/u-boot.dtsi index 1050236330..70e9c8f7ac 100644 --- a/arch/x86/dts/u-boot.dtsi +++ b/arch/x86/dts/u-boot.dtsi @@ -22,7 +22,21 @@ filename = CONFIG_INTEL_ME_FILE; }; #endif -#ifdef CONFIG_SPL +#ifdef CONFIG_TPL + u-boot-spl { + offset = <CONFIG_SPL_TEXT_BASE>; + }; + u-boot-spl-dtb { + }; + u-boot-tpl-with-ucode-ptr { + offset = <CONFIG_TPL_TEXT_BASE>; + }; + u-boot-tpl-dtb { + }; + u-boot { + offset = <CONFIG_SYS_TEXT_BASE>; + }; +#elif defined(CONFIG_SPL) u-boot-spl-with-ucode-ptr { offset = <CONFIG_SPL_TEXT_BASE>; }; @@ -31,7 +45,11 @@ type = "u-boot-dtb-with-ucode"; }; u-boot { +#if CONFIG_SYS_TEXT_BASE == 0x1110000 offset = <0xfff00000>; +#else + offset = <CONFIG_SYS_TEXT_BASE>; +#endif }; #else u-boot-with-ucode-ptr { @@ -77,7 +95,11 @@ offset = <CONFIG_X86_REFCODE_ADDR>; }; #endif -#ifdef CONFIG_SPL +#ifdef CONFIG_TPL + x86-start16-tpl { + offset = <CONFIG_SYS_X86_START16>; + }; +#elif defined(CONFIG_SPL) x86-start16-spl { offset = <CONFIG_SYS_X86_START16>; };