Hi all,
I was able to build u-boot for my custom board. when i tried to load it nothing is coming. I am using TRACE32 ICE and the board is almost similar to MPC8260ADS. I had set the baudrate as 115200 and flowcontrol as none. when i give run command in TRACE32, nothing is coming  in hyperterminal.
My flash base is 0x0000 0000 so i had given this in the board/mpc8260ads/config.mk . I have done some changes in the include/configs/MPC8260ADS.h
for my board.
Any help is appreciated.
Thanks in advance.


Prabha J.
Tata Consultancy Services Limited
Mailto: prabha.j@tcs.com
Website: http://www.tcs.com

Notice: The information contained in this e-mail message and/or attachments to it may contain confidential or privileged information. If you are not the intended recipient, any dissemination, use, review, distribution, printing or copying of the information contained in this e-mail message and/or attachments to it are strictly prohibited. If you have received this communication in error, please notify us by reply e-mail or telephone and immediately and permanently delete the message and any attachments. Thank you