Hi Simon,
On 23/10/15 09:34, Simon Glass wrote:
Hi,
On 22 October 2015 at 19:27, hl hl@rock-chips.com wrote:
Hi Simon,
On 22/10/15 22:08, Simon Glass wrote:
On 20 October 2015 at 20:37, Lin Huang hl@rock-chips.com wrote:
This add some basic files required to allow the board to dispaly serial message and can run command(mmc info etc)
Signed-off-by: Lin Huang hl@rock-chips.com
Changes in v1:
clean copyright announcement
arch/arm/dts/Makefile | 3 ++- arch/arm/dts/rk3036-sdk.dts | 46
++++++++++++++++++++++++++++++++ board/evb_rk3036/evb_rk3036/Kconfig | 15 +++++++++++ board/evb_rk3036/evb_rk3036/MAINTAINERS | 0 board/evb_rk3036/evb_rk3036/Makefile | 7 +++++ board/evb_rk3036/evb_rk3036/evb_rk3036.c | 7 +++++ configs/evb-rk3036_defconfig | 41 ++++++++++++++++++++++++++++ include/configs/evb_rk3036.h | 12 +++++++++ 8 files changed, 130 insertions(+), 1 deletion(-) create mode 100644 arch/arm/dts/rk3036-sdk.dts create mode 100644 board/evb_rk3036/evb_rk3036/Kconfig create mode 100644 board/evb_rk3036/evb_rk3036/MAINTAINERS create mode 100644 board/evb_rk3036/evb_rk3036/Makefile create mode 100644 board/evb_rk3036/evb_rk3036/evb_rk3036.c create mode 100644 configs/evb-rk3036_defconfig create mode 100644 include/configs/evb_rk3036.h
Can you also please update doc/README.rockchip with build instructions and how to get an image onto this board?
I try to figure out how to merge binary blob and u-boot-dtb.bin usemkimage, i will update doc/README ASAP when i finish it. And where should the binary blob store?
Hopefully we don't need the binary block, and u-boot-spl.bin will contain all the code needed. There are boards already with tiny SPL images.
Then you can just provide instructions on how to build the image, perhaps with the 'dd' tool. You don't need to build an entire image in the build system - just provide instructions on how someone might put the SPL and U-Boot onto an SD card and get it to boot.
Okay, i will implement rk3036 sdram driver first, and try to run it in SPL, it may take some times.
Regards, Simon