On Wed, Jan 30, 2013 at 1:40 PM, Marek Vasut marex@denx.de wrote:
Dear Otavio Salvador,
On Wed, Jan 30, 2013 at 12:18 PM, Marek Vasut marex@denx.de wrote:
Dear Otavio Salvador,
This adds support to the LAN9512 chip included in the board and extend the environment to easy netboot use.
Signed-off-by: Otavio Salvador otavio@ossystems.com.br
board/olimex/mx23_olinuxino/mx23_olinuxino.c | 6 +++++ board/olimex/mx23_olinuxino/spl_boot.c | 4 +++ include/configs/mx23_olinuxino.h | 40
+++++++++++++++++++++++++--- 3 files changed, 47 insertions(+), 3 deletions(-)
diff --git a/board/olimex/mx23_olinuxino/mx23_olinuxino.c b/board/olimex/mx23_olinuxino/mx23_olinuxino.c index 2501417..9ed7718 100644 --- a/board/olimex/mx23_olinuxino/mx23_olinuxino.c +++ b/board/olimex/mx23_olinuxino/mx23_olinuxino.c @@ -23,6 +23,7 @@
*/
#include <common.h>
+#include <asm/gpio.h>
#include <asm/io.h> #include <asm/arch/iomux-mx23.h> #include <asm/arch/imx-regs.h>
@@ -45,6 +46,11 @@ int board_early_init_f(void)
/* SSP0 clock at 96MHz */ mxs_set_sspclk(MXC_SSPCLK0, 96000, 0);+#ifdef CONFIG_CMD_USB
/* Enable LAN9512 */gpio_direction_output(MX23_PAD_GPMI_ALE__GPIO_0_17, 1);+#endif
return 0;}
diff --git a/board/olimex/mx23_olinuxino/spl_boot.c b/board/olimex/mx23_olinuxino/spl_boot.c index 3bbf5ad..a96c293 100644 --- a/board/olimex/mx23_olinuxino/spl_boot.c +++ b/board/olimex/mx23_olinuxino/spl_boot.c @@ -95,6 +95,10 @@ const iomux_cfg_t iomux_setup[] = {
MX23_PAD_SSP1_DATA2__SSP1_DATA2 | MUX_CONFIG_SSP, MX23_PAD_SSP1_DATA3__SSP1_DATA3 | MUX_CONFIG_SSP, MX23_PAD_SSP1_SCK__SSP1_SCK | MUX_CONFIG_SSP,
/* Ethernet */MX23_PAD_GPMI_ALE__GPIO_0_17 |(MXS_PAD_3V3 | MXS_PAD_12MA | MXS_PAD_NOPULL),};
void board_init_ll(void)
diff --git a/include/configs/mx23_olinuxino.h b/include/configs/mx23_olinuxino.h index 7e17809..42de557 100644 --- a/include/configs/mx23_olinuxino.h +++ b/include/configs/mx23_olinuxino.h @@ -53,11 +53,13 @@
#define CONFIG_DOS_PARTITION
#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_DHCP
#define CONFIG_CMD_EXT2 #define CONFIG_CMD_FAT #define CONFIG_CMD_GPIO #define CONFIG_CMD_LED #define CONFIG_CMD_MMC
+#define CONFIG_CMD_NET
#define CONFIG_CMD_USB
/*
@@ -148,6 +150,12 @@
#define CONFIG_USB_STORAGE #endif
+/* Ethernet */ +#ifdef CONFIG_CMD_NET +#define CONFIG_USB_HOST_ETHER +#define CONFIG_USB_ETHER_SMSC95XX +#endif
/*
- Boot Linux
*/
Split the env from this patch into separate one ; merge the rest into the 09/10 as the SMC device is also a hub etc.
In this case I'd prefer to add support for the hub only in the previous patch and left the ethernet support on this with the env.
Makes sense?
The hub and the ethernet are the same chip, thus it makes no sense to have two patches for that.
I'd like to have all changes of ethernet in a single commit so the enviroment and all the other changes for it in one logical change. I agree about the hub but the ethernet does not seem right to merge it there.
-- Otavio Salvador O.S. Systems E-mail: otavio@ossystems.com.br http://www.ossystems.com.br Mobile: +55 53 9981-7854 http://projetos.ossystems.com.br