Hi Peng,
On Mon, Jul 20, 2015 at 8:28 AM, Peng Fan Peng.Fan@freescale.com wrote:
- Add USDHC, I2C, UART, 74LV, USB, QSPI support.
- Support SPL
- CONFIG_MX6UL_14X14_EVK_EMMC_REWORK is introduced, this board default supports sd for usdhc2, but can do hardware rework to make usdhc2 support emmc.
Boot Log: U-Boot SPL 2015.07-rc3-00124-g35d727b (Jul 20 2015 - 18:40:59) reading u-boot.img reading u-boot.img
U-Boot 2015.07-rc3-00124-g35d727b (Jul 20 2015 - 18:40:59 +0800)
CPU: Freescale i.MX6UL rev1.0 792 MHz (running at 396 MHz) CPU: Commercial temperature grade (0C to 95C)CPU: Thermal invalid data, fuse: 0x0
- invalid sensor device
Reset cause: POR Board: MX6UL 14x14 EVK I2C: ready DRAM: 512 MiB MMC: FSL_SDHC: 0, FSL_SDHC: 1 *** Warning - bad CRC, using default environment
In: serial Out: serial Err: serial Net: CPU Net Initialization Failed No ethernet found. Hit any key to stop autoboot: 0
Signed-off-by: Peng Fan Peng.Fan@freescale.com
I am running u-boot-imx tree that has this patch applied, but I am not able to boot from SD card:
U-Boot SPL 2015.07-22910-g1c23c1e (Aug 10 2015 - 16:17:50) MMC: no card present spl: mmc init failed with error: -16 ### ERROR ### Please RESET the board ###
Any ideas?
Regards,
Fabio Estevam