Re: [PATCH] i2c: rockchip: De-initialize the bus after start bit failure

Hello Ondrej,

On 25.05.23 14:18, Ondřej Jirman wrote:

From: Ondrej Jirman megi@xff.cz

Failure can happen when i2c is used without initializing pinctrl properly, which U-Boot happily allows in SPL. Without this fix, further I2C access would fail, even after proper pinctrl initialization.

Signed-off-by: Ondrej Jirman megi@xff.cz Cc: Heiko Schocher hs@denx.de

---

drivers/i2c/rk_i2c.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-)

Applied to u-boot-i2c.git master

Thanks!

bye, Heiko