Support all PHY config: PHY_MODE (MII,GMII, RMII, RGMII) Phy wo crystal (25Mhz and 50 Mhz), No 125Mhz from PHY config
Changes in v2: -remark from Joe Hershberger to replace "int interface" with "phy_interface_t interface" and manage return values "-1", "0" with PHY_INTERFACE_MODE_NONE and PHY_INTERFACE_MODE_MII
Christophe Roullier (5): board: stm32mp1: Add board_interface_eth_init net: dwc_eth_qos: add Ethernet stm32mp1 support ARM: dts: stm32: Add Ethernet support on stm32mp1 stm32mp1: Add Ethernet support for stm32mp1 board configs: stm32mp15: Enable Ethernet feature
Patrick Delaunay (1): stm32mp1: clk: use the correct identifier for ethck
arch/arm/dts/stm32mp157-pinctrl.dtsi | 9 +- arch/arm/dts/stm32mp157c-ev1.dts | 2 +- arch/arm/dts/stm32mp157c.dtsi | 16 +- board/st/stm32mp1/stm32mp1.c | 68 ++++- configs/stm32mp15_basic_defconfig | 2 + drivers/clk/clk_stm32mp1.c | 2 +- drivers/net/dwc_eth_qos.c | 435 +++++++++++++++++++++++---- include/configs/stm32mp1.h | 12 +- 8 files changed, 480 insertions(+), 66 deletions(-)