Add the Octeon GPIO DT node to the dtsi file.
Signed-off-by: Stefan Roese sr@denx.de ---
(no changes since v1)
arch/mips/dts/mrvl,cn73xx.dtsi | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+)
diff --git a/arch/mips/dts/mrvl,cn73xx.dtsi b/arch/mips/dts/mrvl,cn73xx.dtsi index a7bd55f8ad..8d32a49795 100644 --- a/arch/mips/dts/mrvl,cn73xx.dtsi +++ b/arch/mips/dts/mrvl,cn73xx.dtsi @@ -38,6 +38,32 @@ #size-cells = <1>; };
+ gpio: gpio-controller@1070000000800 { + #gpio-cells = <2>; + compatible = "cavium,octeon-7890-gpio"; + reg = <0x10700 0x00000800 0x0 0x100>; + gpio-controller; + nr-gpios = <32>; + /* Interrupts are specified by two parts: + * 1) GPIO pin number (0..15) + * 2) Triggering (1 - edge rising + * 2 - edge falling + * 4 - level active high + * 8 - level active low) + */ + interrupt-controller; + #interrupt-cells = <2>; + /* The GPIO pins connect to 16 consecutive CUI bits */ + interrupts = <0x03000 4>, <0x03001 4>, + <0x03002 4>, <0x03003 4>, + <0x03004 4>, <0x03005 4>, + <0x03006 4>, <0x03007 4>, + <0x03008 4>, <0x03009 4>, + <0x0300a 4>, <0x0300b 4>, + <0x0300c 4>, <0x0300d 4>, + <0x0300e 4>, <0x0300f 4>; + }; + reset: reset@1180006001600 { compatible = "mrvl,cn7xxx-rst"; reg = <0x11800 0x06001600 0x0 0x200>;