On 25.10.22 11:28, Stefano Babic wrote:
On 25.10.22 10:50, Oliver Graute wrote:
On 24/10/22, Stefano Babic wrote:
On 24.10.22 13:59, Oliver Graute wrote:
On 24/10/22, Stefano Babic wrote:
On 24.10.22 13:37, Fabio Estevam wrote:
Hi Stefano and Oliver,
On Tue, May 3, 2022 at 7:49 AM Oliver Graute oliver.graute@kococonnector.com wrote: > > Switch to use binman to pack images > > Signed-off-by: Oliver Graute oliver.graute@kococonnector.com > Reviewed-by: Fabio Estevam festevam@denx.de > Reviewed-by: Simon Glass sjg@chromium.org > --- > Changes for v3 > -added Reviewed-by > -rebased on master > > arch/arm/dts/imx8qm-cgtqmx8.dts | 1 + > arch/arm/mach-imx/imx8/Kconfig | 1 + > board/congatec/cgtqmx8/imximage.cfg | 4 ++-- > configs/cgtqmx8_defconfig | 2 +- > doc/board/congatec/cgtqmx8.rst | 3 +-- > 5 files changed, 6 insertions(+), 5 deletions(-)
Just realized that v3 does not include imx8qm-u-boot.dtsi and this breaks CI.
Right - as well as V4, this is what I tried to merge and breaks. I have drop it.
The previous v2 did include it: https://patchwork.ozlabs.org/project/uboot/patch/20220221090139.10066-1-oliv...
Thanks for noting this - Oliver, can you check and repost a V5, then ?
The arch/arm/dts/imx8qm-u-boot.dtsi is applied on the binman Patch for "PATCH v3 imx: imx8qm-rom7720: switch to binman"
So if you first apply the patches for the imx8qm-rom7720 Board it should work.
Ok, thanks for tipp - I apply both and will test again
I saw the CI Pipeline failing. Perhaps the reason is a missing CONFIG_FIT_EXTERNAL_OFFSET?
I see this, but just applying the two patches, multiple boards are broken: imx8qm_rom7720_a1_4G cgtqmx8 imx8qm_mek imx8qxp_mek deneb giedi
+++ b/configs/cgtqmx8_defconfig @@ -20,6 +20,7 @@ CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80200000 CONFIG_REMAKE_ELF=y CONFIG_FIT=y +CONFIG_FIT_EXTERNAL_OFFSET=0x3000 CONFIG_SPL_LOAD_FIT=y # CONFIG_USE_SPL_FIT_GENERATOR is not set
Can you confirm?
I let CI run just to see if cgtqmx8 is fixed.
So this seems to fix the Congatec board. Rather, all DTS for i.MX8 are built together, and other boards have not switched to binman. I feel this dependency too hard. Should we maybe split the targets in arch/arm/dts/Makefile ? All DTS are build according to CONFIG_ARCH_IMX8, so congatec DTS is compiled even in case of deneb and gied.
See https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/13928.
Best regards, Stefano
Stefano