Hi,
For reference, here is (I believe) the current list of Tegra patches required become submitting new patches. I note a few conflicts already, so this will take a little sorting out once the tegra tree is live.
31b9b64 tegra2: Move board_mmc_init into board files fbbb238 tegra2: Modify MMC driver to handle power and cd GPIOs 187643e tegra2: Add support for Ventana 7f27b57 tegra2: Use new GPIO APIs in gpio_config_uart() 6b61458 tegra2: Add arch_cpu_init() to fire up Cortex-A9 eda293e tegra2: Simplify tegra_start() boot path 34e9d46 arm: Move CP15 init out of cpu_init_crit() 3e75dfa tegra2: Enable instruction cache f9c505b tegra2: Remove unneeded boot code 788bfea tegra2: Remove unneeded config option ad525dc tegra2: Remove unused low-level Tegra2 UART code 29843f0 tegra2: Remove unneeded 'dynamic ram size' message 7c6c3ae tegra2: Don't use board pointer before it is set up 5cc0dad tegra2: Tidy UART selection 845f1c6 tegra2: Add UARTB support 33977b1 tegra2: spi: Add SPI driver for Tegra2 SOC 61d1db1 tegra2: config: Enable SPI flash on Seaboard 57e2005 tegra2: Enable SPI environment on Seaboard 707ae71 tegra2: Implement SPI / UART GPIO switch 024baf8 tegra2: spi: Support SPI / UART switch 930fe9f tegra2: Plumb in SPI/UART switch code 40b415f tegra2: Always build with USE_PRIVATE_LIBGCC=yes. 0ec937a tegra2: Change CONFIG_SYS_TEXT_BASE to 0x00108000. 2936c6b tegra2: Move tegra2_mmc_init() prototype to public header. d75bb9f tegra2: Add common Avionic Design Tamonten support. 6205647 tegra2: Add Avionic Design Plutux support. 0b526ff (HEAD, denx/us-tegra, us-tegra) tegra2: Add Avionic Design Medcom support
Regards, Simon