Dieter,
On Mon, 2009-06-22 at 14:04 +0200, Dieter Kiermaier wrote:
Hi all,
I've tried the first time booting a self compiled u-boot from git.marvell.com U-Boot can be downloaded and started with openocd quite well. Boot messages (version is dirty due to a comment in board file):
U-Boot 2009.06-rc2-02207-g14c575a-dirty (Jun 22 2009 - 13:40:45) Marvell-Sheevaplug
SoC: Kirkwood 88F6281_A0 DRAM: 512 MB NAND: 512 MiB *** Warning - bad CRC or NAND, using default environment
most propably you'll need to save the environment.
In: serial Out: serial Err: serial Net: egiga0 88E1116 Initialized on egiga0 Hit any key to stop autoboot: 0 Marvell>>
type "save" here and "reset".
Environment is broken only with marvell git u-boot. Preflashed u-boot find environment is ok. Does sheevaplug u-boot from marvell git use other environment settings than preflashed u-boot?
Marvell>> printenv bootcmd=${x_bootcmd_kernel}; setenv bootargs ${x_bootargs} ${x_bootargs_root}; bootm 0x6400000; bootdelay=3 baudrate=115200 x_bootargs=console=ttyS0,115200 mtdparts=orion_nand:512k(uboot),3m@1m(kernel),1m@4m(psm),13m@5m(rootfs) rw x_bootcmd_kernel=nand read 0x100000 0x6400000 0x300000 x_bootargs_root=root=/dev/mtdblock3 rw rootfstype=jffs2 stdin=serial stdout=serial stderr=serial ethaddr=00:50:43:e0:b9:d8 ethact=egiga0 ipaddr=192.168.2.75
(ipaddr is set after bootup with setenv ipaddr 192.168.2.75)
If I now try to ping another machine in the same network: Marvell>> ping 192.168.2.251 Using egiga0 device
maybe your MAC is missing ? environment ?
This is all what happens - no response from board, CTRL-C doesn't work. Only a hard reset will get the board up again.
Do I have to change something in the default board configuration to succesfullly use networking on the sheevaplug?
u-boot is build with following commands:
make ARCH=arm sheevaplug_config make
I get no errors during build.
My gcc version is: arm-none-linux-gnueabi-gcc (GCC) 4.2.0 20070413 (prerelease)
Any help would be appreciated, Dieter
Regards,
André
U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot
MATRIX VISION GmbH, Talstra�e 16, DE-71570 Oppenweiler Registergericht: Amtsgericht Stuttgart, HRB 271090 Gesch�ftsf�hrer: Gerhard Thullner, Werner Armingeon, Uwe Furtner, Hans-Joachim Reich