Hi Marek,
-----Original Message----- From: Marek Behún kabel@kernel.org Sent: Monday, November 8, 2021 3:43 PM To: Roman Bacik roman.bacik@broadcom.com Cc: U-Boot Mailing List u-boot@lists.denx.de; Pali Rohar pali@kernel.org; Bharat Gooty bharat.gooty@broadcom.com; Joe Hershberger joe.hershberger@ni.com; Ramon Fried rfried.dev@gmail.com Subject: Re: [PATCH v10 1/2] net: brcm: netXtreme driver
Hello Roman,
some last requests from me.
On Mon, 8 Nov 2021 14:46:10 -0800 Roman Bacik roman.bacik@broadcom.com wrote:
+#define bnxt_down_chip(bp) bnxt_hwrm_run(down_chip, bp, 0) +#define bnxt_bring_chip(bp) bnxt_hwrm_run(bring_chip, bp, 1)
Could these be changed to functions instead of macros, please?
Ok, we will make the change.
+int bnxt_free_rx_iob(struct bnxt *bp) +{
- unsigned int i;
- if (!(FLAG_TEST(bp->flag_hwrm, VALID_RX_IOB)))
return STATUS_SUCCESS;Please change all STATUS_SUCCESS to 0 and STATUS_FAILURE to either -1 or appropriate -errno, as is customary in U-Boot.
This status is returned from our HW/FW so it would make more sense to keep it as is. But we will change it per your request and we will replace STATUS_SUCCESS with 0 and STATUS_FAILURE with -1 and hence loose status codes actually returned by HW/FW.
At first I thought that you have implemented this driver by starting from kernel's implementation. They look very similar. But it was probably an old version of kernel implementation (perhaps broadcom internal?), because many things are different now.
+static void set_rx_desc(u8 *buf, void *iob, u16 cons_id, u32 iob_idx) +{
- struct rx_prod_pkt_bd *desc;
- u16 off = cons_id * sizeof(struct rx_prod_pkt_bd);
- desc = (struct rx_prod_pkt_bd *)&buf[off];
- desc->flags_type = RX_PROD_PKT_BD_TYPE_RX_PROD_PKT;
- desc->len = MAX_ETHERNET_PACKET_BUFFER_SIZE;
What bugs me with this driver most is that it reimplements many things
on
its own. MAX_ETHERNET_PACKET_BUFFER_SIZE is 1536, but we have PKTSIZE_ALIGN in include/net.h for that.
- bp->link_status = STATUS_LINK_DOWN;
This can be a simple bool: link is either up or down...
The bp structure is passed to our HW/FW, which expects a valid integer link_status. We cannot make this change and have the driver working.
+typedef int (*hwrm_func_t)(struct bnxt *bp);
+hwrm_func_t down_chip[] = {
- bnxt_hwrm_cfa_l2_filter_free, /* Free l2 filter */
- bnxt_free_rx_iob, /* Free rx iob */
- bnxt_hwrm_vnic_free, /* Free vnic */
- bnxt_hwrm_ring_free_grp, /* Free ring group */
- bnxt_hwrm_ring_free_rx, /* Free rx ring */
- bnxt_hwrm_ring_free_tx, /* Free tx ring */
- bnxt_hwrm_ring_free_cq, /* Free CQ ring */
- bnxt_hwrm_stat_ctx_free, /* Free Stat ctx */
- bnxt_hwrm_func_drv_unrgtr, /* unreg driver */
- NULL,
+};
+hwrm_func_t bring_chip[] = {
- bnxt_hwrm_ver_get, /* HWRM_VER_GET */
- bnxt_hwrm_func_reset_req, /* HWRM_FUNC_RESET */
- bnxt_hwrm_func_drv_rgtr, /* HWRM_FUNC_DRV_RGTR */
- bnxt_hwrm_func_resource_qcaps, /*
HWRM_FUNC_RESOURCE_QCAPS */
- bnxt_hwrm_func_qcfg_req, /* HWRM_FUNC_QCFG */
- bnxt_hwrm_func_qcaps_req, /* HWRM_FUNC_QCAPS */
- bnxt_hwrm_get_link_speed, /* HWRM_NVM_GET_VARIABLE -
203 */
- bnxt_hwrm_port_mac_cfg, /* HWRM_PORT_MAC_CFG */
- bnxt_qphy_link, /* HWRM_PORT_PHY_QCFG */
- bnxt_hwrm_func_cfg_req, /* HWRM_FUNC_CFG - ring
resource*/
- bnxt_hwrm_stat_ctx_alloc, /* Allocate Stat Ctx ID */
- bnxt_hwrm_ring_alloc_cq, /* Allocate CQ Ring */
- bnxt_hwrm_ring_alloc_tx, /* Allocate Tx ring */
- bnxt_hwrm_ring_alloc_rx, /* Allocate Rx Ring */
- bnxt_hwrm_ring_alloc_grp, /* Create Ring Group */
- post_rx_buffers, /* Post RX buffers */
- bnxt_hwrm_set_async_event, /* ENABLES_ASYNC_EVENT_CR
*/
- bnxt_hwrm_vnic_alloc, /* Alloc VNIC */
- bnxt_hwrm_vnic_cfg, /* Config VNIC */
- bnxt_hwrm_cfa_l2_filter_alloc, /* Alloc L2 Filter */
- get_phy_link, /* Get Physical Link */
- NULL,
+};
+int bnxt_hwrm_run(hwrm_func_t cmds[], struct bnxt *bp, int flag) +{
- hwrm_func_t *ptr;
- int ret;
- int status = STATUS_SUCCESS;
- for (ptr = cmds; *ptr; ++ptr) {
ret = (*ptr)(bp);if (ret) {status = STATUS_FAILURE;/* Continue till all cleanup routines are called
*/
if (flag)return STATUS_FAILURE;Please change this function to return 0 on success and the error value from last failed function on failure: int ret = 0; for (...) { ret = (*ptr)(bp); if (ret) break; } return ret;
If you can, maybe return -errno codes that make sense on failures in places where you now return STATUS_FAILURE.
We will change the method as requested. Note the status code is coming from HW/FW so returning it to uboot upper layers would not make much sense. But we will change STATUS_SUCCESS and STATUS_FAILURE to 0 and -1 as requested.
I'll be honest that I don't like how this driver uses code construct that are many time different from that in U-Boot/Linux. I guess this is how the Broadcom people wrote it, and it probably looked this way also in Linux, but was changed since then to conform to Linux style. (Or maybe they didn't accept it until it conformed?)
Anyway, these are probably the last changes that I will be suggesting. I don't like many things here, but I guess beggars cannot be choosers, and we in U-Boot are more on the side of beggars when talking about man-hours companies are willing to spend for U-Boot :( Since the driver works for you, maybe we should accept it as it is.
Marek
To be honest changing status codes coming from FW does not seem right. But we will try to make the requested changes. Thanks,
Roman