There was for long time no activity in the mpx5xxx area. We need to go further and convert to Kconfig, but it turned out, nobody is interested anymore in mpc5xxx, so remove it.
Signed-off-by: Heiko Schocher hs@denx.de Signed-off-by: Christophe Leroy christophe.leroy@c-s.fr --- .travis.yml | 6 - MAINTAINERS | 6 - README | 19 +- api/api_platform-powerpc.c | 2 - arch/powerpc/Kconfig | 8 - arch/powerpc/cpu/mpc512x/Kconfig | 34 - arch/powerpc/cpu/mpc512x/Makefile | 18 - arch/powerpc/cpu/mpc512x/asm-offsets.h | 15 - arch/powerpc/cpu/mpc512x/config.mk | 7 - arch/powerpc/cpu/mpc512x/cpu.c | 193 --- arch/powerpc/cpu/mpc512x/cpu_init.c | 195 --- arch/powerpc/cpu/mpc512x/diu.c | 44 - arch/powerpc/cpu/mpc512x/fixed_sdram.c | 155 -- arch/powerpc/cpu/mpc512x/ide.c | 111 -- arch/powerpc/cpu/mpc512x/interrupts.c | 45 - arch/powerpc/cpu/mpc512x/iopin.c | 87 -- arch/powerpc/cpu/mpc512x/pci.c | 209 --- arch/powerpc/cpu/mpc512x/serial.c | 431 ------ arch/powerpc/cpu/mpc512x/speed.c | 137 -- arch/powerpc/cpu/mpc512x/start.S | 694 --------- arch/powerpc/cpu/mpc512x/traps.c | 190 --- arch/powerpc/cpu/mpc512x/u-boot.lds | 73 - arch/powerpc/cpu/mpc5xxx/Kconfig | 90 -- arch/powerpc/cpu/mpc5xxx/Makefile | 25 - arch/powerpc/cpu/mpc5xxx/config.mk | 8 - arch/powerpc/cpu/mpc5xxx/cpu.c | 168 --- arch/powerpc/cpu/mpc5xxx/cpu_init.c | 231 --- .../cpu/mpc5xxx/firmware_sc_task_bestcomm.impl.S | 359 ----- arch/powerpc/cpu/mpc5xxx/ide.c | 75 - arch/powerpc/cpu/mpc5xxx/interrupts.c | 330 ----- arch/powerpc/cpu/mpc5xxx/io.S | 112 -- arch/powerpc/cpu/mpc5xxx/loadtask.c | 76 - arch/powerpc/cpu/mpc5xxx/pci_mpc5200.c | 157 -- arch/powerpc/cpu/mpc5xxx/serial.c | 265 ---- arch/powerpc/cpu/mpc5xxx/speed.c | 84 -- arch/powerpc/cpu/mpc5xxx/spl_boot.c | 76 - arch/powerpc/cpu/mpc5xxx/start.S | 780 ---------- arch/powerpc/cpu/mpc5xxx/traps.c | 220 --- arch/powerpc/cpu/mpc5xxx/u-boot-customlayout.lds | 80 - arch/powerpc/cpu/mpc5xxx/u-boot-spl.lds | 44 - arch/powerpc/cpu/mpc5xxx/u-boot.lds | 75 - arch/powerpc/cpu/mpc5xxx/usb.c | 42 - arch/powerpc/cpu/mpc5xxx/usb_ohci.c | 1529 -------------------- arch/powerpc/cpu/mpc5xxx/usb_ohci.h | 418 ------ arch/powerpc/cpu/ppc4xx/usb_ohci.c | 3 - arch/powerpc/cpu/ppc4xx/usb_ohci.h | 5 - arch/powerpc/include/asm/global_data.h | 7 - arch/powerpc/include/asm/immap_512x.h | 1264 ---------------- arch/powerpc/include/asm/mpc512x.h | 42 - arch/powerpc/include/asm/ppc.h | 13 - arch/powerpc/lib/Makefile | 18 - arch/powerpc/lib/bootm.c | 4 - arch/powerpc/lib/memcpy_mpc5200.c | 55 - board/a3m071/Kconfig | 9 - board/a3m071/MAINTAINERS | 7 - board/a3m071/Makefile | 5 - board/a3m071/README | 80 - board/a3m071/a3m071.c | 479 ------ board/a3m071/is46r16320d.h | 24 - board/a3m071/mt46v16m16-75.h | 21 - board/a4m072/Kconfig | 9 - board/a4m072/MAINTAINERS | 6 - board/a4m072/Makefile | 8 - board/a4m072/a4m072.c | 479 ------ board/a4m072/mt46v32m16.h | 21 - board/canmb/Kconfig | 9 - board/canmb/MAINTAINERS | 6 - board/canmb/Makefile | 9 - board/canmb/canmb.c | 187 --- board/canmb/mt48lc16m32s2-75.h | 14 - board/cm5200/Kconfig | 9 - board/cm5200/MAINTAINERS | 6 - board/cm5200/Makefile | 8 - board/cm5200/cm5200.c | 355 ----- board/cm5200/cm5200.h | 171 --- board/cm5200/cmd_cm5200.c | 402 ----- board/cm5200/fwupdate.c | 181 --- board/cm5200/fwupdate.h | 31 - board/davedenx/aria/Kconfig | 12 - board/davedenx/aria/MAINTAINERS | 6 - board/davedenx/aria/Makefile | 7 - board/davedenx/aria/aria.c | 115 -- board/esd/mecp5123/Kconfig | 12 - board/esd/mecp5123/MAINTAINERS | 6 - board/esd/mecp5123/Makefile | 7 - board/esd/mecp5123/mecp5123.c | 200 --- board/freescale/mpc5121ads/Kconfig | 12 - board/freescale/mpc5121ads/MAINTAINERS | 7 - board/freescale/mpc5121ads/Makefile | 8 - board/freescale/mpc5121ads/README | 7 - board/freescale/mpc5121ads/mpc5121ads.c | 265 ---- board/ifm/ac14xx/Kconfig | 12 - board/ifm/ac14xx/MAINTAINERS | 6 - board/ifm/ac14xx/Makefile | 7 - board/ifm/ac14xx/ac14xx.c | 569 -------- board/ifm/o2dnt2/Kconfig | 77 - board/ifm/o2dnt2/MAINTAINERS | 20 - board/ifm/o2dnt2/Makefile | 8 - board/ifm/o2dnt2/o2dnt2.c | 388 ----- board/inka4x0/Kconfig | 9 - board/inka4x0/MAINTAINERS | 6 - board/inka4x0/Makefile | 8 - board/inka4x0/inka4x0.c | 254 ---- board/inka4x0/inkadiag.c | 465 ------ board/inka4x0/k4h511638c.h | 16 - board/inka4x0/mt46v16m16-75.h | 16 - board/inka4x0/mt46v32m16-75.h | 16 - board/inka4x0/mt48lc16m16a2-75.h | 14 - board/intercontrol/digsy_mtc/Kconfig | 12 - board/intercontrol/digsy_mtc/MAINTAINERS | 9 - board/intercontrol/digsy_mtc/Makefile | 8 - board/intercontrol/digsy_mtc/cmd_disp.c | 41 - board/intercontrol/digsy_mtc/digsy_mtc.c | 477 ------ board/intercontrol/digsy_mtc/eeprom.h | 18 - board/intercontrol/digsy_mtc/is42s16800a-7t.h | 11 - board/intercontrol/digsy_mtc/is45s16800a2.h | 15 - board/ipek01/Kconfig | 9 - board/ipek01/MAINTAINERS | 6 - board/ipek01/Makefile | 8 - board/ipek01/ipek01.c | 270 ---- board/jupiter/Kconfig | 9 - board/jupiter/MAINTAINERS | 6 - board/jupiter/Makefile | 8 - board/jupiter/jupiter.c | 296 ---- board/motionpro/Kconfig | 9 - board/motionpro/MAINTAINERS | 6 - board/motionpro/Makefile | 8 - board/motionpro/motionpro.c | 243 ---- board/munices/Kconfig | 9 - board/munices/MAINTAINERS | 6 - board/munices/Makefile | 8 - board/munices/mt48lc16m16a2-75.h | 14 - board/munices/munices.c | 159 -- board/pdm360ng/Kconfig | 9 - board/pdm360ng/MAINTAINERS | 6 - board/pdm360ng/Makefile | 8 - board/pdm360ng/pdm360ng.c | 581 -------- board/phytec/pcm030/Kconfig | 12 - board/phytec/pcm030/MAINTAINERS | 7 - board/phytec/pcm030/Makefile | 8 - board/phytec/pcm030/README | 42 - board/phytec/pcm030/mt46v32m16-75.h | 21 - board/phytec/pcm030/pcm030.c | 209 --- board/tqc/tqm5200/Kconfig | 25 - board/tqc/tqm5200/MAINTAINERS | 23 - board/tqc/tqm5200/Makefile | 8 - board/tqc/tqm5200/cam5200_flash.c | 768 ---------- board/tqc/tqm5200/cmd_stk52xx.c | 1228 ---------------- board/tqc/tqm5200/mt48lc16m16a2-75.h | 18 - board/tqc/tqm5200/tqm5200.c | 875 ----------- board/v38b/Kconfig | 9 - board/v38b/MAINTAINERS | 6 - board/v38b/Makefile | 8 - board/v38b/ethaddr.c | 197 --- board/v38b/v38b.c | 263 ---- cmd/Kconfig | 2 +- cmd/reginfo.c | 55 - common/Kconfig | 2 +- common/board_f.c | 9 +- configs/MiniFAP_defconfig | 33 - configs/O2D300_defconfig | 17 - configs/O2DNT2_RAMBOOT_defconfig | 21 - configs/O2DNT2_defconfig | 20 - configs/O2D_defconfig | 17 - configs/O2I_defconfig | 17 - configs/O2MNT_O2M110_defconfig | 18 - configs/O2MNT_O2M112_defconfig | 18 - configs/O2MNT_O2M113_defconfig | 18 - configs/O2MNT_defconfig | 17 - configs/O3DNT_defconfig | 18 - configs/TQM5200S_HIGHBOOT_defconfig | 28 - configs/TQM5200S_defconfig | 28 - configs/TQM5200_B_HIGHBOOT_defconfig | 33 - configs/TQM5200_B_defconfig | 33 - configs/TQM5200_STK100_defconfig | 33 - configs/TQM5200_defconfig | 32 - configs/a3m071_defconfig | 32 - configs/a4m072_defconfig | 25 - configs/a4m2k_defconfig | 33 - configs/ac14xx_defconfig | 16 - configs/aria_defconfig | 16 - configs/cam5200_defconfig | 23 - configs/cam5200_niosflash_defconfig | 23 - configs/canmb_defconfig | 14 - configs/charon_defconfig | 32 - configs/cm5200_defconfig | 28 - configs/digsy_mtc_RAMBOOT_defconfig | 31 - configs/digsy_mtc_defconfig | 29 - configs/digsy_mtc_rev5_RAMBOOT_defconfig | 31 - configs/digsy_mtc_rev5_defconfig | 31 - configs/fo300_defconfig | 35 - configs/inka4x0_defconfig | 19 - configs/ipek01_defconfig | 23 - configs/jupiter_defconfig | 14 - configs/mecp5123_defconfig | 19 - configs/motionpro_defconfig | 33 - configs/mpc5121ads_defconfig | 25 - configs/mpc5121ads_rev2_defconfig | 27 - configs/munices_defconfig | 13 - configs/pcm030_LOWBOOT_defconfig | 15 - configs/pcm030_defconfig | 15 - configs/pdm360ng_defconfig | 23 - configs/v38b_defconfig | 27 - doc/README.generic_usb_ohci | 4 +- doc/README.scrapyard | 21 - doc/README.serial_multi | 26 - drivers/bootcount/bootcount.c | 10 - drivers/input/keyboard.c | 2 +- drivers/input/ps2ser.c | 94 -- drivers/misc/fsl_iim.c | 2 - drivers/mtd/nand/Kconfig | 4 +- drivers/mtd/nand/Makefile | 1 - drivers/mtd/nand/mpc5121_nfc.c | 656 --------- drivers/net/Makefile | 2 - drivers/net/mpc512x_fec.c | 769 ---------- drivers/net/mpc512x_fec.h | 98 -- drivers/net/mpc5xxx_fec.c | 1031 ------------- drivers/net/mpc5xxx_fec.h | 282 ---- drivers/rtc/Makefile | 1 - drivers/rtc/mpc5xxx.c | 128 -- drivers/serial/serial.c | 2 - drivers/usb/host/Makefile | 4 - drivers/usb/host/ehci-mpc512x.c | 140 -- drivers/usb/host/ohci-hcd.c | 5 - drivers/usb/host/ohci.h | 7 - examples/standalone/Makefile | 1 - examples/standalone/interrupt.c | 65 - include/asm-generic/u-boot.h | 7 +- include/configs/TQM5200.h | 626 -------- include/configs/a3m071.h | 408 ------ include/configs/a4m072.h | 324 ----- include/configs/ac14xx.h | 516 ------- include/configs/aria.h | 591 -------- include/configs/canmb.h | 199 --- include/configs/charon.h | 63 - include/configs/cm5200.h | 286 ---- include/configs/digsy_mtc.h | 410 ------ include/configs/inka4x0.h | 310 ---- include/configs/ipek01.h | 321 ---- include/configs/jupiter.h | 246 ---- include/configs/manroland/mpc5200-common.h | 176 --- include/configs/mecp5123.h | 398 ----- include/configs/motionpro.h | 329 ----- include/configs/mpc5121-common.h | 32 - include/configs/mpc5121ads.h | 581 -------- include/configs/munices.h | 186 --- include/configs/o2d.h | 74 - include/configs/o2d300.h | 81 -- include/configs/o2dnt-common.h | 300 ---- include/configs/o2dnt2.h | 66 - include/configs/o2i.h | 66 - include/configs/o2mnt.h | 74 - include/configs/o3dnt.h | 69 - include/configs/pcm030.h | 378 ----- include/configs/pdm360ng.h | 420 ------ include/configs/v38b.h | 284 ---- include/keyboard.h | 2 +- include/mpc5xxx.h | 893 ------------ include/mpc5xxx_sdma.h | 93 -- include/netdev.h | 2 - include/post.h | 9 +- include/ppc_asm.tmpl | 5 - include/serial.h | 11 +- include/status_led.h | 4 - include/usb/ehci-ci.h | 3 - include/watchdog.h | 5 - post/board/pdm360ng/Makefile | 8 - post/board/pdm360ng/coproc_com.c | 78 - scripts/config_whitelist.txt | 203 --- 269 files changed, 14 insertions(+), 34020 deletions(-) delete mode 100644 arch/powerpc/cpu/mpc512x/Kconfig delete mode 100644 arch/powerpc/cpu/mpc512x/Makefile delete mode 100644 arch/powerpc/cpu/mpc512x/asm-offsets.h delete mode 100644 arch/powerpc/cpu/mpc512x/config.mk delete mode 100644 arch/powerpc/cpu/mpc512x/cpu.c delete mode 100644 arch/powerpc/cpu/mpc512x/cpu_init.c delete mode 100644 arch/powerpc/cpu/mpc512x/diu.c delete mode 100644 arch/powerpc/cpu/mpc512x/fixed_sdram.c delete mode 100644 arch/powerpc/cpu/mpc512x/ide.c delete mode 100644 arch/powerpc/cpu/mpc512x/interrupts.c delete mode 100644 arch/powerpc/cpu/mpc512x/iopin.c delete mode 100644 arch/powerpc/cpu/mpc512x/pci.c delete mode 100644 arch/powerpc/cpu/mpc512x/serial.c delete mode 100644 arch/powerpc/cpu/mpc512x/speed.c delete mode 100644 arch/powerpc/cpu/mpc512x/start.S delete mode 100644 arch/powerpc/cpu/mpc512x/traps.c delete mode 100644 arch/powerpc/cpu/mpc512x/u-boot.lds delete mode 100644 arch/powerpc/cpu/mpc5xxx/Kconfig delete mode 100644 arch/powerpc/cpu/mpc5xxx/Makefile delete mode 100644 arch/powerpc/cpu/mpc5xxx/config.mk delete mode 100644 arch/powerpc/cpu/mpc5xxx/cpu.c delete mode 100644 arch/powerpc/cpu/mpc5xxx/cpu_init.c delete mode 100644 arch/powerpc/cpu/mpc5xxx/firmware_sc_task_bestcomm.impl.S delete mode 100644 arch/powerpc/cpu/mpc5xxx/ide.c delete mode 100644 arch/powerpc/cpu/mpc5xxx/interrupts.c delete mode 100644 arch/powerpc/cpu/mpc5xxx/io.S delete mode 100644 arch/powerpc/cpu/mpc5xxx/loadtask.c delete mode 100644 arch/powerpc/cpu/mpc5xxx/pci_mpc5200.c delete mode 100644 arch/powerpc/cpu/mpc5xxx/serial.c delete mode 100644 arch/powerpc/cpu/mpc5xxx/speed.c delete mode 100644 arch/powerpc/cpu/mpc5xxx/spl_boot.c delete mode 100644 arch/powerpc/cpu/mpc5xxx/start.S delete mode 100644 arch/powerpc/cpu/mpc5xxx/traps.c delete mode 100644 arch/powerpc/cpu/mpc5xxx/u-boot-customlayout.lds delete mode 100644 arch/powerpc/cpu/mpc5xxx/u-boot-spl.lds delete mode 100644 arch/powerpc/cpu/mpc5xxx/u-boot.lds delete mode 100644 arch/powerpc/cpu/mpc5xxx/usb.c delete mode 100644 arch/powerpc/cpu/mpc5xxx/usb_ohci.c delete mode 100644 arch/powerpc/cpu/mpc5xxx/usb_ohci.h delete mode 100644 arch/powerpc/include/asm/immap_512x.h delete mode 100644 arch/powerpc/include/asm/mpc512x.h delete mode 100644 arch/powerpc/lib/memcpy_mpc5200.c delete mode 100644 board/a3m071/Kconfig delete mode 100644 board/a3m071/MAINTAINERS delete mode 100644 board/a3m071/Makefile delete mode 100644 board/a3m071/README delete mode 100644 board/a3m071/a3m071.c delete mode 100644 board/a3m071/is46r16320d.h delete mode 100644 board/a3m071/mt46v16m16-75.h delete mode 100644 board/a4m072/Kconfig delete mode 100644 board/a4m072/MAINTAINERS delete mode 100644 board/a4m072/Makefile delete mode 100644 board/a4m072/a4m072.c delete mode 100644 board/a4m072/mt46v32m16.h delete mode 100644 board/canmb/Kconfig delete mode 100644 board/canmb/MAINTAINERS delete mode 100644 board/canmb/Makefile delete mode 100644 board/canmb/canmb.c delete mode 100644 board/canmb/mt48lc16m32s2-75.h delete mode 100644 board/cm5200/Kconfig delete mode 100644 board/cm5200/MAINTAINERS delete mode 100644 board/cm5200/Makefile delete mode 100644 board/cm5200/cm5200.c delete mode 100644 board/cm5200/cm5200.h delete mode 100644 board/cm5200/cmd_cm5200.c delete mode 100644 board/cm5200/fwupdate.c delete mode 100644 board/cm5200/fwupdate.h delete mode 100644 board/davedenx/aria/Kconfig delete mode 100644 board/davedenx/aria/MAINTAINERS delete mode 100644 board/davedenx/aria/Makefile delete mode 100644 board/davedenx/aria/aria.c delete mode 100644 board/esd/mecp5123/Kconfig delete mode 100644 board/esd/mecp5123/MAINTAINERS delete mode 100644 board/esd/mecp5123/Makefile delete mode 100644 board/esd/mecp5123/mecp5123.c delete mode 100644 board/freescale/mpc5121ads/Kconfig delete mode 100644 board/freescale/mpc5121ads/MAINTAINERS delete mode 100644 board/freescale/mpc5121ads/Makefile delete mode 100644 board/freescale/mpc5121ads/README delete mode 100644 board/freescale/mpc5121ads/mpc5121ads.c delete mode 100644 board/ifm/ac14xx/Kconfig delete mode 100644 board/ifm/ac14xx/MAINTAINERS delete mode 100644 board/ifm/ac14xx/Makefile delete mode 100644 board/ifm/ac14xx/ac14xx.c delete mode 100644 board/ifm/o2dnt2/Kconfig delete mode 100644 board/ifm/o2dnt2/MAINTAINERS delete mode 100644 board/ifm/o2dnt2/Makefile delete mode 100644 board/ifm/o2dnt2/o2dnt2.c delete mode 100644 board/inka4x0/Kconfig delete mode 100644 board/inka4x0/MAINTAINERS delete mode 100644 board/inka4x0/Makefile delete mode 100644 board/inka4x0/inka4x0.c delete mode 100644 board/inka4x0/inkadiag.c delete mode 100644 board/inka4x0/k4h511638c.h delete mode 100644 board/inka4x0/mt46v16m16-75.h delete mode 100644 board/inka4x0/mt46v32m16-75.h delete mode 100644 board/inka4x0/mt48lc16m16a2-75.h delete mode 100644 board/intercontrol/digsy_mtc/Kconfig delete mode 100644 board/intercontrol/digsy_mtc/MAINTAINERS delete mode 100644 board/intercontrol/digsy_mtc/Makefile delete mode 100644 board/intercontrol/digsy_mtc/cmd_disp.c delete mode 100644 board/intercontrol/digsy_mtc/digsy_mtc.c delete mode 100644 board/intercontrol/digsy_mtc/eeprom.h delete mode 100644 board/intercontrol/digsy_mtc/is42s16800a-7t.h delete mode 100644 board/intercontrol/digsy_mtc/is45s16800a2.h delete mode 100644 board/ipek01/Kconfig delete mode 100644 board/ipek01/MAINTAINERS delete mode 100644 board/ipek01/Makefile delete mode 100644 board/ipek01/ipek01.c delete mode 100644 board/jupiter/Kconfig delete mode 100644 board/jupiter/MAINTAINERS delete mode 100644 board/jupiter/Makefile delete mode 100644 board/jupiter/jupiter.c delete mode 100644 board/motionpro/Kconfig delete mode 100644 board/motionpro/MAINTAINERS delete mode 100644 board/motionpro/Makefile delete mode 100644 board/motionpro/motionpro.c delete mode 100644 board/munices/Kconfig delete mode 100644 board/munices/MAINTAINERS delete mode 100644 board/munices/Makefile delete mode 100644 board/munices/mt48lc16m16a2-75.h delete mode 100644 board/munices/munices.c delete mode 100644 board/pdm360ng/Kconfig delete mode 100644 board/pdm360ng/MAINTAINERS delete mode 100644 board/pdm360ng/Makefile delete mode 100644 board/pdm360ng/pdm360ng.c delete mode 100644 board/phytec/pcm030/Kconfig delete mode 100644 board/phytec/pcm030/MAINTAINERS delete mode 100644 board/phytec/pcm030/Makefile delete mode 100644 board/phytec/pcm030/README delete mode 100644 board/phytec/pcm030/mt46v32m16-75.h delete mode 100644 board/phytec/pcm030/pcm030.c delete mode 100644 board/tqc/tqm5200/Kconfig delete mode 100644 board/tqc/tqm5200/MAINTAINERS delete mode 100644 board/tqc/tqm5200/Makefile delete mode 100644 board/tqc/tqm5200/cam5200_flash.c delete mode 100644 board/tqc/tqm5200/cmd_stk52xx.c delete mode 100644 board/tqc/tqm5200/mt48lc16m16a2-75.h delete mode 100644 board/tqc/tqm5200/tqm5200.c delete mode 100644 board/v38b/Kconfig delete mode 100644 board/v38b/MAINTAINERS delete mode 100644 board/v38b/Makefile delete mode 100644 board/v38b/ethaddr.c delete mode 100644 board/v38b/v38b.c delete mode 100644 configs/MiniFAP_defconfig delete mode 100644 configs/O2D300_defconfig delete mode 100644 configs/O2DNT2_RAMBOOT_defconfig delete mode 100644 configs/O2DNT2_defconfig delete mode 100644 configs/O2D_defconfig delete mode 100644 configs/O2I_defconfig delete mode 100644 configs/O2MNT_O2M110_defconfig delete mode 100644 configs/O2MNT_O2M112_defconfig delete mode 100644 configs/O2MNT_O2M113_defconfig delete mode 100644 configs/O2MNT_defconfig delete mode 100644 configs/O3DNT_defconfig delete mode 100644 configs/TQM5200S_HIGHBOOT_defconfig delete mode 100644 configs/TQM5200S_defconfig delete mode 100644 configs/TQM5200_B_HIGHBOOT_defconfig delete mode 100644 configs/TQM5200_B_defconfig delete mode 100644 configs/TQM5200_STK100_defconfig delete mode 100644 configs/TQM5200_defconfig delete mode 100644 configs/a3m071_defconfig delete mode 100644 configs/a4m072_defconfig delete mode 100644 configs/a4m2k_defconfig delete mode 100644 configs/ac14xx_defconfig delete mode 100644 configs/aria_defconfig delete mode 100644 configs/cam5200_defconfig delete mode 100644 configs/cam5200_niosflash_defconfig delete mode 100644 configs/canmb_defconfig delete mode 100644 configs/charon_defconfig delete mode 100644 configs/cm5200_defconfig delete mode 100644 configs/digsy_mtc_RAMBOOT_defconfig delete mode 100644 configs/digsy_mtc_defconfig delete mode 100644 configs/digsy_mtc_rev5_RAMBOOT_defconfig delete mode 100644 configs/digsy_mtc_rev5_defconfig delete mode 100644 configs/fo300_defconfig delete mode 100644 configs/inka4x0_defconfig delete mode 100644 configs/ipek01_defconfig delete mode 100644 configs/jupiter_defconfig delete mode 100644 configs/mecp5123_defconfig delete mode 100644 configs/motionpro_defconfig delete mode 100644 configs/mpc5121ads_defconfig delete mode 100644 configs/mpc5121ads_rev2_defconfig delete mode 100644 configs/munices_defconfig delete mode 100644 configs/pcm030_LOWBOOT_defconfig delete mode 100644 configs/pcm030_defconfig delete mode 100644 configs/pdm360ng_defconfig delete mode 100644 configs/v38b_defconfig delete mode 100644 drivers/mtd/nand/mpc5121_nfc.c delete mode 100644 drivers/net/mpc512x_fec.c delete mode 100644 drivers/net/mpc512x_fec.h delete mode 100644 drivers/net/mpc5xxx_fec.c delete mode 100644 drivers/net/mpc5xxx_fec.h delete mode 100644 drivers/rtc/mpc5xxx.c delete mode 100644 drivers/usb/host/ehci-mpc512x.c delete mode 100644 examples/standalone/interrupt.c delete mode 100644 include/configs/TQM5200.h delete mode 100644 include/configs/a3m071.h delete mode 100644 include/configs/a4m072.h delete mode 100644 include/configs/ac14xx.h delete mode 100644 include/configs/aria.h delete mode 100644 include/configs/canmb.h delete mode 100644 include/configs/charon.h delete mode 100644 include/configs/cm5200.h delete mode 100644 include/configs/digsy_mtc.h delete mode 100644 include/configs/inka4x0.h delete mode 100644 include/configs/ipek01.h delete mode 100644 include/configs/jupiter.h delete mode 100644 include/configs/manroland/mpc5200-common.h delete mode 100644 include/configs/mecp5123.h delete mode 100644 include/configs/motionpro.h delete mode 100644 include/configs/mpc5121-common.h delete mode 100644 include/configs/mpc5121ads.h delete mode 100644 include/configs/munices.h delete mode 100644 include/configs/o2d.h delete mode 100644 include/configs/o2d300.h delete mode 100644 include/configs/o2dnt-common.h delete mode 100644 include/configs/o2dnt2.h delete mode 100644 include/configs/o2i.h delete mode 100644 include/configs/o2mnt.h delete mode 100644 include/configs/o3dnt.h delete mode 100644 include/configs/pcm030.h delete mode 100644 include/configs/pdm360ng.h delete mode 100644 include/configs/v38b.h delete mode 100644 include/mpc5xxx.h delete mode 100644 include/mpc5xxx_sdma.h delete mode 100644 post/board/pdm360ng/Makefile delete mode 100644 post/board/pdm360ng/coproc_com.c
diff --git a/.travis.yml b/.travis.yml index fe9148fc75..c4d96a0338 100644 --- a/.travis.yml +++ b/.travis.yml @@ -194,12 +194,6 @@ matrix: - BUILDMAN="mips" TOOLCHAIN="mips" - env: - - BUILDMAN="mpc512x" - - env: - - BUILDMAN="mpc5xx" - - env: - - BUILDMAN="mpc5xxx" - - env: - BUILDMAN="mpc83xx" - env: - BUILDMAN="mpc85xx -x freescale" diff --git a/MAINTAINERS b/MAINTAINERS index 0cadc51321..7f8526272e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -321,12 +321,6 @@ M: Wolfgang Denk wd@denx.de S: Maintained F: arch/powerpc/
-POWERPC MPC5XXX -M: Wolfgang Denk wd@denx.de -S: Maintained -T: git git://git.denx.de/u-boot-mpc5xxx.git -F: arch/powerpc/cpu/mpc5*/ - POWERPC MPC8XX M: Wolfgang Denk wd@denx.de S: Maintained diff --git a/README b/README index 260a44973f..eb370a1cdf 100644 --- a/README +++ b/README @@ -636,10 +636,6 @@ The following options need to be configured: * Adds the "fdt" command * The bootm command automatically updates the fdt
- OF_CPU - The proper name of the cpus node (only required for - MPC512X and MPC5xxx based boards). - OF_SOC - The proper name of the soc node (only required for - MPC512X and MPC5xxx based boards). OF_TBCLK - The timebase frequency. OF_STDOUT_PATH - The path to the console device
@@ -1282,7 +1278,7 @@ The following options need to be configured:
- USB Support: At the moment only the UHCI host controller is - supported (PIP405, MIP405, MPC5200); define + supported (PIP405, MIP405); define CONFIG_USB_UHCI to enable it. define CONFIG_USB_KEYBOARD to enable the USB Keyboard and define CONFIG_USB_STORAGE to enable the USB @@ -1290,19 +1286,6 @@ The following options need to be configured: Note: Supported are USB Keyboards and USB Floppy drives (TEAC FD-05PUB). - MPC5200 USB requires additional defines: - CONFIG_USB_CLOCK - for 528 MHz Clock: 0x0001bbbb - CONFIG_PSC3_USB - for USB on PSC3 - CONFIG_USB_CONFIG - for differential drivers: 0x00001000 - for single ended drivers: 0x00005000 - for differential drivers on PSC3: 0x00000100 - for single ended drivers on PSC3: 0x00004100 - CONFIG_SYS_USB_EVENT_POLL - May be defined to allow interrupt polling - instead of using asynchronous interrupts
CONFIG_USB_EHCI_TXFIFO_THRESH enables setting of the txfilltuning field in the EHCI controller on reset. diff --git a/api/api_platform-powerpc.c b/api/api_platform-powerpc.c index f6a93cad45..fcfa2ad8ff 100644 --- a/api/api_platform-powerpc.c +++ b/api/api_platform-powerpc.c @@ -33,8 +33,6 @@ int platform_sys_info(struct sys_info *si) #if defined(CONFIG_8xx) || \ defined(CONFIG_E500) || defined(CONFIG_MPC86xx) #define bi_bar bi_immr_base -#elif defined(CONFIG_MPC5xxx) -#define bi_bar bi_mbar_base #elif defined(CONFIG_MPC83xx) #define bi_bar bi_immrbar #endif diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index 7d206b30b9..8cab8508ac 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -8,12 +8,6 @@ choice prompt "CPU select" optional
-config MPC512X - bool "MPC512X" - -config MPC5xxx - bool "MPC5xxx" - config MPC83xx bool "MPC83xx" select CREATE_ARCH_SYMLINK @@ -45,8 +39,6 @@ config 4xx
endchoice
-source "arch/powerpc/cpu/mpc512x/Kconfig" -source "arch/powerpc/cpu/mpc5xxx/Kconfig" source "arch/powerpc/cpu/mpc83xx/Kconfig" source "arch/powerpc/cpu/mpc85xx/Kconfig" source "arch/powerpc/cpu/mpc86xx/Kconfig" diff --git a/arch/powerpc/cpu/mpc512x/Kconfig b/arch/powerpc/cpu/mpc512x/Kconfig deleted file mode 100644 index 53450aeaba..0000000000 --- a/arch/powerpc/cpu/mpc512x/Kconfig +++ /dev/null @@ -1,34 +0,0 @@ -menu "mpc512x CPU" - depends on MPC512X - -config SYS_CPU - default "mpc512x" - -choice - prompt "Target select" - optional - -config TARGET_PDM360NG - bool "Support pdm360ng" - -config TARGET_ARIA - bool "Support aria" - -config TARGET_MECP5123 - bool "Support mecp5123" - -config TARGET_MPC5121ADS - bool "Support mpc5121ads" - -config TARGET_AC14XX - bool "Support ac14xx" - -endchoice - -source "board/davedenx/aria/Kconfig" -source "board/esd/mecp5123/Kconfig" -source "board/freescale/mpc5121ads/Kconfig" -source "board/ifm/ac14xx/Kconfig" -source "board/pdm360ng/Kconfig" - -endmenu diff --git a/arch/powerpc/cpu/mpc512x/Makefile b/arch/powerpc/cpu/mpc512x/Makefile deleted file mode 100644 index 933deebdae..0000000000 --- a/arch/powerpc/cpu/mpc512x/Makefile +++ /dev/null @@ -1,18 +0,0 @@ -# -# (C) Copyright 2007-2009 DENX Software Engineering -# -# SPDX-License-Identifier: GPL-2.0+ -# - -extra-y = start.o -obj-y := cpu.o -obj-y += traps.o -obj-y += cpu_init.o -obj-y += fixed_sdram.o -obj-y += interrupts.o -obj-y += iopin.o -obj-y += serial.o -obj-y += speed.o -obj-$(CONFIG_FSL_DIU_FB) += diu.o -obj-$(CONFIG_CMD_IDE) += ide.o -obj-$(CONFIG_PCI) += pci.o diff --git a/arch/powerpc/cpu/mpc512x/asm-offsets.h b/arch/powerpc/cpu/mpc512x/asm-offsets.h deleted file mode 100644 index 957d4be2d2..0000000000 --- a/arch/powerpc/cpu/mpc512x/asm-offsets.h +++ /dev/null @@ -1,15 +0,0 @@ -/* - * needed for arch/powerpc/cpu/mpc512x/start.S - * - * These should be auto-generated - */ -#define LPCS0AW 0x0024 -#define SRAMBAR 0x00C4 -#define SWCRR 0x0904 -#define LPC_OFFSET 0x10000 -#define CS0_CONFIG 0x00000 -#define CS_CTRL 0x00020 -#define CS_CTRL_ME 0x01000000 /* CS Master Enable bit */ - -#define EXC_OFF_SYS_RESET 0x0100 -#define _START_OFFSET EXC_OFF_SYS_RESET diff --git a/arch/powerpc/cpu/mpc512x/config.mk b/arch/powerpc/cpu/mpc512x/config.mk deleted file mode 100644 index 5bf1b2a3b9..0000000000 --- a/arch/powerpc/cpu/mpc512x/config.mk +++ /dev/null @@ -1,7 +0,0 @@ -# -# (C) Copyright 2007-2010 DENX Software Engineering -# -# SPDX-License-Identifier: GPL-2.0+ -# - -PLATFORM_CPPFLAGS += -DCONFIG_E300 -msoft-float -mcpu=603e diff --git a/arch/powerpc/cpu/mpc512x/cpu.c b/arch/powerpc/cpu/mpc512x/cpu.c deleted file mode 100644 index ce524fcdc7..0000000000 --- a/arch/powerpc/cpu/mpc512x/cpu.c +++ /dev/null @@ -1,193 +0,0 @@ -/* - * (C) Copyright 2007-2010 DENX Software Engineering - * Copyright (C) 2004-2006 Freescale Semiconductor, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * CPU specific code for the MPC512x family. - * - * Derived from the MPC83xx code. - */ - -#include <common.h> -#include <command.h> -#include <net.h> -#include <netdev.h> -#include <asm/processor.h> -#include <asm/io.h> - -#if defined(CONFIG_OF_LIBFDT) -#include <fdt_support.h> -#endif - -DECLARE_GLOBAL_DATA_PTR; - -int checkcpu (void) -{ - volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; - ulong clock = gd->cpu_clk; - u32 pvr = get_pvr (); - u32 spridr = in_be32(&immr->sysconf.spridr); - char buf1[32], buf2[32]; - - puts ("CPU: "); - - switch (spridr & 0xffff0000) { - case SPR_5121E: - puts ("MPC5121e "); - break; - default: - printf ("Unknown part ID %08x ", spridr & 0xffff0000); - } - printf ("rev. %d.%d, Core ", SVR_MJREV (spridr), SVR_MNREV (spridr)); - - switch (pvr & 0xffff0000) { - case PVR_E300C4: - puts ("e300c4 "); - break; - default: - puts ("unknown "); - } - printf ("at %s MHz, CSB at %s MHz (RSR=0x%04lx)\n", - strmhz(buf1, clock), - strmhz(buf2, gd->arch.csb_clk), - gd->arch.reset_status & 0xffff); - return 0; -} - - -int -do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) -{ - ulong msr; - volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR; - - /* Interrupts and MMU off */ - __asm__ __volatile__ ("mfmsr %0":"=r" (msr):); - - msr &= ~( MSR_EE | MSR_IR | MSR_DR); - __asm__ __volatile__ ("mtmsr %0"::"r" (msr)); - - /* - * Enable Reset Control Reg - "RSTE" is the magic word that let us go - */ - out_be32(&immap->reset.rpr, 0x52535445); - - /* Verify Reset Control Reg is enabled */ - while (!(in_be32(&immap->reset.rcer) & RCER_CRE)) - ; - - printf ("Resetting the board.\n"); - udelay(200); - - /* Perform reset */ - out_be32(&immap->reset.rcr, RCR_SWHR); - - /* Unreached... */ - return 1; -} - - -/* - * Get timebase clock frequency (like cpu_clk in Hz) - */ -unsigned long get_tbclk (void) -{ - return (gd->bus_clk + 3L) / 4L; -} - - -#if defined(CONFIG_WATCHDOG) -void watchdog_reset (void) -{ - int re_enable = disable_interrupts (); - - /* Reset watchdog */ - volatile immap_t *immr = (immap_t *) CONFIG_SYS_IMMR; - out_be32(&immr->wdt.swsrr, 0x556c); - out_be32(&immr->wdt.swsrr, 0xaa39); - - if (re_enable) - enable_interrupts (); -} -#endif - -#ifdef CONFIG_OF_LIBFDT - -#ifdef CONFIG_OF_SUPPORT_OLD_DEVICE_TREES -/* - * fdt setup for old device trees - * fix up - * cpu clocks - * soc clocks - * ethernet addresses - */ -static void old_ft_cpu_setup(void *blob, bd_t *bd) -{ - /* - * avoid fixing up by path because that - * produces scary error messages - */ - uchar enetaddr[6]; - - /* - * old device trees have ethernet nodes with - * device_type = "network" - */ - eth_getenv_enetaddr("ethaddr", enetaddr); - do_fixup_by_prop(blob, "device_type", "network", 8, - "local-mac-address", enetaddr, 6, 0); - do_fixup_by_prop(blob, "device_type", "network", 8, - "address", enetaddr, 6, 0); - /* - * old device trees have soc nodes with - * device_type = "soc" - */ - do_fixup_by_prop_u32(blob, "device_type", "soc", 4, - "bus-frequency", bd->bi_ipsfreq, 0); -} -#endif - -static void ft_clock_setup(void *blob, bd_t *bd) -{ - char *cpu_path = "/cpus/" OF_CPU; - - /* - * fixup cpu clocks using path - */ - do_fixup_by_path_u32(blob, cpu_path, - "timebase-frequency", OF_TBCLK, 1); - do_fixup_by_path_u32(blob, cpu_path, - "bus-frequency", bd->bi_busfreq, 1); - do_fixup_by_path_u32(blob, cpu_path, - "clock-frequency", bd->bi_intfreq, 1); - /* - * fixup soc clocks using compatible - */ - do_fixup_by_compat_u32(blob, OF_SOC_COMPAT, - "bus-frequency", bd->bi_ipsfreq, 1); -} - -void ft_cpu_setup(void *blob, bd_t *bd) -{ -#ifdef CONFIG_OF_SUPPORT_OLD_DEVICE_TREES - old_ft_cpu_setup(blob, bd); -#endif - ft_clock_setup(blob, bd); - fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize); -} -#endif - -#ifdef CONFIG_MPC512x_FEC -/* Default initializations for FEC controllers. To override, - * create a board-specific function called: - * int board_eth_init(bd_t *bis) - */ - -int cpu_eth_init(bd_t *bis) -{ - return mpc512x_fec_initialize(bis); -} -#endif diff --git a/arch/powerpc/cpu/mpc512x/cpu_init.c b/arch/powerpc/cpu/mpc512x/cpu_init.c deleted file mode 100644 index 48a5e4f8b2..0000000000 --- a/arch/powerpc/cpu/mpc512x/cpu_init.c +++ /dev/null @@ -1,195 +0,0 @@ -/* - * Copyright (C) 2004-2006 Freescale Semiconductor, Inc. - * Copyright (C) 2007-2009 DENX Software Engineering - * - * SPDX-License-Identifier: GPL-2.0+ - * - * Derived from the MPC83xx code. - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/mpc512x.h> -#include <asm/processor.h> - -DECLARE_GLOBAL_DATA_PTR; - -/* - * Set up the memory map, initialize registers, - */ -void cpu_init_f (volatile immap_t * im) -{ - u32 ips_div; - - /* Pointer is writable since we allocated a register for it */ - gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET); - - /* Clear initial global data */ - memset ((void *) gd, 0, sizeof (gd_t)); - - /* Local Window and chip select configuration */ -#if defined(CONFIG_SYS_CS0_START) && defined(CONFIG_SYS_CS0_SIZE) - out_be32(&im->sysconf.lpcs0aw, - CSAW_START(CONFIG_SYS_CS0_START) | - CSAW_STOP(CONFIG_SYS_CS0_START, CONFIG_SYS_CS0_SIZE)); - sync_law(&im->sysconf.lpcs0aw); -#endif -#if defined(CONFIG_SYS_CS0_CFG) - out_be32(&im->lpc.cs_cfg[0], CONFIG_SYS_CS0_CFG); -#endif - -#if defined(CONFIG_SYS_CS1_START) && defined(CONFIG_SYS_CS1_SIZE) - out_be32(&im->sysconf.lpcs1aw, - CSAW_START(CONFIG_SYS_CS1_START) | - CSAW_STOP(CONFIG_SYS_CS1_START, CONFIG_SYS_CS1_SIZE)); - sync_law(&im->sysconf.lpcs1aw); -#endif -#if defined(CONFIG_SYS_CS1_CFG) - out_be32(&im->lpc.cs_cfg[1], CONFIG_SYS_CS1_CFG); -#endif - -#if defined(CONFIG_SYS_CS2_START) && (defined CONFIG_SYS_CS2_SIZE) - out_be32(&im->sysconf.lpcs2aw, - CSAW_START(CONFIG_SYS_CS2_START) | - CSAW_STOP(CONFIG_SYS_CS2_START, CONFIG_SYS_CS2_SIZE)); - sync_law(&im->sysconf.lpcs2aw); -#endif -#if defined(CONFIG_SYS_CS2_CFG) - out_be32(&im->lpc.cs_cfg[2], CONFIG_SYS_CS2_CFG); -#endif - -#if defined(CONFIG_SYS_CS3_START) && defined(CONFIG_SYS_CS3_SIZE) - out_be32(&im->sysconf.lpcs3aw, - CSAW_START(CONFIG_SYS_CS3_START) | - CSAW_STOP(CONFIG_SYS_CS3_START, CONFIG_SYS_CS3_SIZE)); - sync_law(&im->sysconf.lpcs3aw); -#endif -#if defined(CONFIG_SYS_CS3_CFG) - out_be32(&im->lpc.cs_cfg[3], CONFIG_SYS_CS3_CFG); -#endif - -#if defined(CONFIG_SYS_CS4_START) && defined(CONFIG_SYS_CS4_SIZE) - out_be32(&im->sysconf.lpcs4aw, - CSAW_START(CONFIG_SYS_CS4_START) | - CSAW_STOP(CONFIG_SYS_CS4_START, CONFIG_SYS_CS4_SIZE)); - sync_law(&im->sysconf.lpcs4aw); -#endif -#if defined(CONFIG_SYS_CS4_CFG) - out_be32(&im->lpc.cs_cfg[4], CONFIG_SYS_CS4_CFG); -#endif - -#if defined(CONFIG_SYS_CS5_START) && defined(CONFIG_SYS_CS5_SIZE) - out_be32(&im->sysconf.lpcs5aw, - CSAW_START(CONFIG_SYS_CS5_START) | - CSAW_STOP(CONFIG_SYS_CS5_START, CONFIG_SYS_CS5_SIZE)); - sync_law(&im->sysconf.lpcs5aw); -#endif -#if defined(CONFIG_SYS_CS5_CFG) - out_be32(&im->lpc.cs_cfg[5], CONFIG_SYS_CS5_CFG); -#endif - -#if defined(CONFIG_SYS_CS6_START) && defined(CONFIG_SYS_CS6_SIZE) - out_be32(&im->sysconf.lpcs6aw, - CSAW_START(CONFIG_SYS_CS6_START) | - CSAW_STOP(CONFIG_SYS_CS6_START, CONFIG_SYS_CS6_SIZE)); - sync_law(&im->sysconf.lpcs6aw); -#endif -#if defined(CONFIG_SYS_CS6_CFG) - out_be32(&im->lpc.cs_cfg[6], CONFIG_SYS_CS6_CFG); -#endif - -#if defined(CONFIG_SYS_CS7_START) && defined(CONFIG_SYS_CS7_SIZE) - out_be32(&im->sysconf.lpcs7aw, - CSAW_START(CONFIG_SYS_CS7_START) | - CSAW_STOP(CONFIG_SYS_CS7_START, CONFIG_SYS_CS7_SIZE)); - sync_law(&im->sysconf.lpcs7aw); -#endif -#if defined(CONFIG_SYS_CS7_CFG) - out_be32(&im->lpc.cs_cfg[7], CONFIG_SYS_CS7_CFG); -#endif - -#if defined CONFIG_SYS_CS_ALETIMING - if (SVR_MJREV(in_be32(&im->sysconf.spridr)) >= 2) - out_be32(&im->lpc.altr, CONFIG_SYS_CS_ALETIMING); -#endif -#if defined CONFIG_SYS_CS_BURST - out_be32(&im->lpc.cs_bcr, CONFIG_SYS_CS_BURST); -#endif -#if defined CONFIG_SYS_CS_DEADCYCLE - out_be32(&im->lpc.cs_dccr, CONFIG_SYS_CS_DEADCYCLE); -#endif -#if defined CONFIG_SYS_CS_HOLDCYCLE - out_be32(&im->lpc.cs_hccr, CONFIG_SYS_CS_HOLDCYCLE); -#endif - - /* system performance tweaking */ - -#ifdef CONFIG_SYS_ACR_PIPE_DEP - /* Arbiter pipeline depth */ - out_be32(&im->arbiter.acr, - (im->arbiter.acr & ~ACR_PIPE_DEP) | - (CONFIG_SYS_ACR_PIPE_DEP << ACR_PIPE_DEP_SHIFT) - ); -#endif - -#ifdef CONFIG_SYS_ACR_RPTCNT - /* Arbiter repeat count */ - out_be32(im->arbiter.acr, - (im->arbiter.acr & ~(ACR_RPTCNT)) | - (CONFIG_SYS_ACR_RPTCNT << ACR_RPTCNT_SHIFT) - ); -#endif - - /* RSR - Reset Status Register - clear all status */ - gd->arch.reset_status = im->reset.rsr; - out_be32(&im->reset.rsr, ~RSR_RES); - - /* - * RMR - Reset Mode Register - enable checkstop reset - */ - out_be32(&im->reset.rmr, RMR_CSRE & (1 << RMR_CSRE_SHIFT)); - - /* Set IPS-CSB divider: IPS = 1/2 CSB */ - ips_div = in_be32(&im->clk.scfr[0]); - ips_div &= ~(SCFR1_IPS_DIV_MASK); - ips_div |= SCFR1_IPS_DIV << SCFR1_IPS_DIV_SHIFT; - out_be32(&im->clk.scfr[0], ips_div); - -#ifdef SCFR1_LPC_DIV - clrsetbits_be32(&im->clk.scfr[0], SCFR1_LPC_DIV_MASK, - SCFR1_LPC_DIV << SCFR1_LPC_DIV_SHIFT); -#endif - -#ifdef SCFR1_NFC_DIV - clrsetbits_be32(&im->clk.scfr[0], SCFR1_NFC_DIV_MASK, - SCFR1_NFC_DIV << SCFR1_NFC_DIV_SHIFT); -#endif - -#ifdef SCFR1_DIU_DIV - clrsetbits_be32(&im->clk.scfr[0], SCFR1_DIU_DIV_MASK, - SCFR1_DIU_DIV << SCFR1_DIU_DIV_SHIFT); -#endif - - /* - * Enable Time Base/Decrementer - * - * NOTICE: TB needs to be enabled as early as possible in order to - * have udelay() working; if not enabled, usually leads to a hang, like - * during FLASH chip identification etc. - */ - setbits_be32(&im->sysconf.spcr, SPCR_TBEN); - - /* - * Enable clocks - */ - out_be32(&im->clk.sccr[0], SCCR1_CLOCKS_EN); - out_be32(&im->clk.sccr[1], SCCR2_CLOCKS_EN); -#if defined(CONFIG_FSL_IIM) || defined(CONFIG_CMD_FUSE) - setbits_be32(&im->clk.sccr[1], CLOCK_SCCR2_IIM_EN); -#endif -} - -int cpu_init_r (void) -{ - return 0; -} diff --git a/arch/powerpc/cpu/mpc512x/diu.c b/arch/powerpc/cpu/mpc512x/diu.c deleted file mode 100644 index 36e1f9cffd..0000000000 --- a/arch/powerpc/cpu/mpc512x/diu.c +++ /dev/null @@ -1,44 +0,0 @@ -/* - * Copyright 2008 Freescale Semiconductor, Inc. - * York Sun yorksun@freescale.com - * - * FSL DIU Framebuffer driver - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <command.h> -#include <asm/io.h> - -#include <fsl_diu_fb.h> - -DECLARE_GLOBAL_DATA_PTR; - -void diu_set_pixel_clock(unsigned int pixclock) -{ - volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; - volatile clk512x_t *clk = &immap->clk; - volatile unsigned int *clkdvdr = &clk->scfr[0]; - unsigned long speed_ccb, temp, pixval; - - speed_ccb = get_bus_freq(0) * 4; - temp = 1000000000/pixclock; - temp *= 1000; - pixval = speed_ccb / temp; - debug("DIU pixval = %lu\n", pixval); - - /* Modify PXCLK in GUTS CLKDVDR */ - debug("DIU: Current value of CLKDVDR = 0x%08x\n", in_be32(clkdvdr)); - temp = in_be32(clkdvdr) & 0xFFFFFF00; - out_be32(clkdvdr, temp | (pixval & 0xFF)); - debug("DIU: Modified value of CLKDVDR = 0x%08x\n", in_be32(clkdvdr)); -} - -int platform_diu_init(unsigned int xres, unsigned int yres, const char *port) -{ - unsigned int pixel_format = 0x88883316; - - debug("mpc5121_diu_init\n"); - return fsl_diu_init(xres, yres, pixel_format, 0); -} diff --git a/arch/powerpc/cpu/mpc512x/fixed_sdram.c b/arch/powerpc/cpu/mpc512x/fixed_sdram.c deleted file mode 100644 index 68c5f8a27b..0000000000 --- a/arch/powerpc/cpu/mpc512x/fixed_sdram.c +++ /dev/null @@ -1,155 +0,0 @@ -/* - * (C) Copyright 2007-2009 DENX Software Engineering - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/io.h> -#include <asm/mpc512x.h> - -/* - * MDDRC Config Runtime Settings - */ -ddr512x_config_t default_mddrc_config = { - .ddr_sys_config = CONFIG_SYS_MDDRC_SYS_CFG, - .ddr_time_config0 = CONFIG_SYS_MDDRC_TIME_CFG0, - .ddr_time_config1 = CONFIG_SYS_MDDRC_TIME_CFG1, - .ddr_time_config2 = CONFIG_SYS_MDDRC_TIME_CFG2, -}; - -u32 default_init_seq[] = { - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_PCHG_ALL, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_RFSH, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_RFSH, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_MICRON_INIT_DEV_OP, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_EM2, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_PCHG_ALL, - CONFIG_SYS_DDRCMD_EM2, - CONFIG_SYS_DDRCMD_EM3, - CONFIG_SYS_DDRCMD_EN_DLL, - CONFIG_SYS_MICRON_INIT_DEV_OP, - CONFIG_SYS_DDRCMD_PCHG_ALL, - CONFIG_SYS_DDRCMD_RFSH, - CONFIG_SYS_MICRON_INIT_DEV_OP, - CONFIG_SYS_DDRCMD_OCD_DEFAULT, - CONFIG_SYS_DDRCMD_PCHG_ALL, - CONFIG_SYS_DDRCMD_NOP -}; - -/* - * fixed sdram init: - * The board doesn't use memory modules that have serial presence - * detect or similar mechanism for discovery of the DRAM settings - */ -long int fixed_sdram(ddr512x_config_t *mddrc_config, - u32 *dram_init_seq, int seq_sz) -{ - volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; - u32 msize = CONFIG_SYS_MAX_RAM_SIZE; - u32 msize_log2 = __ilog2(msize); - u32 i; - - /* take default settings and init sequence if necessary */ - if (mddrc_config == NULL) - mddrc_config = &default_mddrc_config; - if (dram_init_seq == NULL) { - dram_init_seq = default_init_seq; - seq_sz = ARRAY_SIZE(default_init_seq); - } - - /* Initialize IO Control */ - out_be32(&im->io_ctrl.io_control_mem, CONFIG_SYS_IOCTRL_MUX_DDR); - - /* Initialize DDR Local Window */ - out_be32(&im->sysconf.ddrlaw.bar, CONFIG_SYS_DDR_BASE & 0xFFFFF000); - out_be32(&im->sysconf.ddrlaw.ar, msize_log2 - 1); - sync_law(&im->sysconf.ddrlaw.ar); - - /* DDR Enable */ - /* - * the "enable" combination: DRAM controller out of reset, - * clock enabled, command mode -- BUT leave CKE low for now - */ - i = MDDRC_SYS_CFG_EN & ~MDDRC_SYS_CFG_CKE_MASK; - out_be32(&im->mddrc.ddr_sys_config, i); - /* maintain 200 microseconds of stable power and clock */ - udelay(200); - /* apply a NOP, it shouldn't harm */ - out_be32(&im->mddrc.ddr_command, CONFIG_SYS_DDRCMD_NOP); - /* now assert CKE (high) */ - i |= MDDRC_SYS_CFG_CKE_MASK; - out_be32(&im->mddrc.ddr_sys_config, i); - - /* Initialize DDR Priority Manager */ - out_be32(&im->mddrc.prioman_config1, CONFIG_SYS_MDDRCGRP_PM_CFG1); - out_be32(&im->mddrc.prioman_config2, CONFIG_SYS_MDDRCGRP_PM_CFG2); - out_be32(&im->mddrc.hiprio_config, CONFIG_SYS_MDDRCGRP_HIPRIO_CFG); - out_be32(&im->mddrc.lut_table0_main_upper, CONFIG_SYS_MDDRCGRP_LUT0_MU); - out_be32(&im->mddrc.lut_table0_main_lower, CONFIG_SYS_MDDRCGRP_LUT0_ML); - out_be32(&im->mddrc.lut_table1_main_upper, CONFIG_SYS_MDDRCGRP_LUT1_MU); - out_be32(&im->mddrc.lut_table1_main_lower, CONFIG_SYS_MDDRCGRP_LUT1_ML); - out_be32(&im->mddrc.lut_table2_main_upper, CONFIG_SYS_MDDRCGRP_LUT2_MU); - out_be32(&im->mddrc.lut_table2_main_lower, CONFIG_SYS_MDDRCGRP_LUT2_ML); - out_be32(&im->mddrc.lut_table3_main_upper, CONFIG_SYS_MDDRCGRP_LUT3_MU); - out_be32(&im->mddrc.lut_table3_main_lower, CONFIG_SYS_MDDRCGRP_LUT3_ML); - out_be32(&im->mddrc.lut_table4_main_upper, CONFIG_SYS_MDDRCGRP_LUT4_MU); - out_be32(&im->mddrc.lut_table4_main_lower, CONFIG_SYS_MDDRCGRP_LUT4_ML); - out_be32(&im->mddrc.lut_table0_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT0_AU); - out_be32(&im->mddrc.lut_table0_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT0_AL); - out_be32(&im->mddrc.lut_table1_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT1_AU); - out_be32(&im->mddrc.lut_table1_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT1_AL); - out_be32(&im->mddrc.lut_table2_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT2_AU); - out_be32(&im->mddrc.lut_table2_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT2_AL); - out_be32(&im->mddrc.lut_table3_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT3_AU); - out_be32(&im->mddrc.lut_table3_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT3_AL); - out_be32(&im->mddrc.lut_table4_alternate_upper, CONFIG_SYS_MDDRCGRP_LUT4_AU); - out_be32(&im->mddrc.lut_table4_alternate_lower, CONFIG_SYS_MDDRCGRP_LUT4_AL); - - /* - * Initialize MDDRC - * put MDDRC in CMD mode and - * set the max time between refreshes to 0 during init process - */ - out_be32(&im->mddrc.ddr_sys_config, - mddrc_config->ddr_sys_config | MDDRC_SYS_CFG_CMD_MASK); - out_be32(&im->mddrc.ddr_time_config0, - mddrc_config->ddr_time_config0 & MDDRC_REFRESH_ZERO_MASK); - out_be32(&im->mddrc.ddr_time_config1, - mddrc_config->ddr_time_config1); - out_be32(&im->mddrc.ddr_time_config2, - mddrc_config->ddr_time_config2); - - /* Initialize DDR with either default or supplied init sequence */ - for (i = 0; i < seq_sz; i++) - out_be32(&im->mddrc.ddr_command, dram_init_seq[i]); - - /* Start MDDRC */ - out_be32(&im->mddrc.ddr_time_config0, mddrc_config->ddr_time_config0); - out_be32(&im->mddrc.ddr_sys_config, mddrc_config->ddr_sys_config); - - /* Allow for the DLL to startup before accessing data */ - udelay(10); - - msize = get_ram_size(CONFIG_SYS_DDR_BASE, CONFIG_SYS_MAX_RAM_SIZE); - /* Fix DDR Local Window for new size */ - out_be32(&im->sysconf.ddrlaw.ar, __ilog2(msize) - 1); - sync_law(&im->sysconf.ddrlaw.ar); - - return msize; -} diff --git a/arch/powerpc/cpu/mpc512x/ide.c b/arch/powerpc/cpu/mpc512x/ide.c deleted file mode 100644 index dd1130694d..0000000000 --- a/arch/powerpc/cpu/mpc512x/ide.c +++ /dev/null @@ -1,111 +0,0 @@ -/* - * (C) Copyright 2007-2009 DENX Software Engineering - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <command.h> -#include <asm/io.h> -#include <asm/processor.h> - -DECLARE_GLOBAL_DATA_PTR; - -#if defined(CONFIG_IDE_RESET) - -void ide_set_reset (int idereset) -{ - volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; - debug ("ide_set_reset(%d)\n", idereset); - - if (idereset) { - out_be32(&im->pata.pata_ata_control, 0); - } else { - out_be32(&im->pata.pata_ata_control, FSL_ATA_CTRL_ATA_RST_B); - } - udelay(100); -} - -void init_ide_reset (void) -{ - debug ("init_ide_reset\n"); - - /* - * Clear the reset bit to reset the interface - * cf. RefMan MPC5121EE: 28.4.1 Resetting the ATA Bus - */ - ide_set_reset(1); - - /* Assert the reset bit to enable the interface */ - ide_set_reset(0); - -} - -#define CALC_TIMING(t) (t + period - 1) / period - -int ide_preinit (void) -{ - volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; - long t; - const struct { - short t0; - short t1; - short t2_8; - short t2_16; - short t2i; - short t4; - short t9; - short tA; - } pio_specs = { - .t0 = 600, - .t1 = 70, - .t2_8 = 290, - .t2_16 = 165, - .t2i = 0, - .t4 = 30, - .t9 = 20, - .tA = 50, - }; - union { - u32 config; - struct { - u8 field1; - u8 field2; - u8 field3; - u8 field4; - }bytes; - } cfg; - - debug ("IDE preinit using PATA peripheral at IMMR-ADDR %08x\n", - (u32)&im->pata); - - /* Set the reset bit to 1 to enable the interface */ - ide_set_reset(0); - - /* Init timings : we use PIO mode 0 timings */ - t = 1000000000 / gd->arch.ips_clk; /* period in ns */ - cfg.bytes.field1 = 3; - cfg.bytes.field2 = 3; - cfg.bytes.field3 = (pio_specs.t1 + t) / t; - cfg.bytes.field4 = (pio_specs.t2_8 + t) / t; - - out_be32(&im->pata.pata_time1, cfg.config); - - cfg.bytes.field1 = (pio_specs.t2_8 + t) / t; - cfg.bytes.field2 = (pio_specs.tA + t) / t + 2; - cfg.bytes.field3 = 1; - cfg.bytes.field4 = (pio_specs.t4 + t) / t; - - out_be32(&im->pata.pata_time2, cfg.config); - - cfg.config = in_be32(&im->pata.pata_time3); - cfg.bytes.field1 = (pio_specs.t9 + t) / t; - - out_be32(&im->pata.pata_time3, cfg.config); - - debug ("PATA preinit complete.\n"); - - return 0; -} - -#endif /* defined(CONFIG_IDE_RESET) */ diff --git a/arch/powerpc/cpu/mpc512x/interrupts.c b/arch/powerpc/cpu/mpc512x/interrupts.c deleted file mode 100644 index 3385aed1cc..0000000000 --- a/arch/powerpc/cpu/mpc512x/interrupts.c +++ /dev/null @@ -1,45 +0,0 @@ -/* - * (C) Copyright 2000-2007 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * Copyright 2004 Freescale Semiconductor, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - * - * Derived from the MPC83xx code. - */ - -#include <common.h> - -DECLARE_GLOBAL_DATA_PTR; - -struct irq_action { - interrupt_handler_t *handler; - void *arg; - ulong count; -}; - -int interrupt_init_cpu (unsigned *decrementer_count) -{ - *decrementer_count = get_tbclk () / CONFIG_SYS_HZ; - - return 0; -} - -/* - * Install and free an interrupt handler. - */ -void -irq_install_handler (int irq, interrupt_handler_t * handler, void *arg) -{ -} - -void irq_free_handler (int irq) -{ -} - -void timer_interrupt_cpu (struct pt_regs *regs) -{ - /* nothing to do here */ - return; -} diff --git a/arch/powerpc/cpu/mpc512x/iopin.c b/arch/powerpc/cpu/mpc512x/iopin.c deleted file mode 100644 index 0b53c7b98e..0000000000 --- a/arch/powerpc/cpu/mpc512x/iopin.c +++ /dev/null @@ -1,87 +0,0 @@ -/* - * (C) Copyright 2008 - * Martha J Marx, Silicon Turnkey Express, mmarx@silicontkx.com - * mpc512x I/O pin/pad initialization for the ADS5121 board - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <linux/types.h> -#include <asm/io.h> - -void iopin_initialize(iopin_t *ioregs_init, int len) -{ - short i, j, p; - u32 *reg; - immap_t *im = (immap_t *)CONFIG_SYS_IMMR; - - reg = (u32 *)&(im->io_ctrl); - - if (sizeof(ioregs_init) == 0) - return; - - for (i = 0; i < len; i++) { - for (p = 0, j = ioregs_init[i].p_offset / sizeof(u_long); - p < ioregs_init[i].nr_pins; p++, j++) { - if (ioregs_init[i].bit_or) - setbits_be32(reg + j, ioregs_init[i].val); - else - out_be32 (reg + j, ioregs_init[i].val); - } - } - return; -} - -void iopin_initialize_bits(iopin_t *ioregs_init, int len) -{ - short i, j, p; - u32 *reg, mask; - immap_t *im = (immap_t *)CONFIG_SYS_IMMR; - - reg = (u32 *)&(im->io_ctrl); - - /* iterate over table entries */ - for (i = 0; i < len; i++) { - /* iterate over pins within a table entry */ - for (p = 0, j = ioregs_init[i].p_offset / sizeof(u_long); - p < ioregs_init[i].nr_pins; p++, j++) { - if (ioregs_init[i].bit_or & IO_PIN_OVER_EACH) { - /* replace all settings at once */ - out_be32(reg + j, ioregs_init[i].val); - } else { - /* - * only replace individual parts, but - * REPLACE them instead of just ORing - * them in and "inheriting" previously - * set bits which we don't want - */ - mask = 0; - if (ioregs_init[i].bit_or & IO_PIN_OVER_FMUX) - mask |= IO_PIN_FMUX(3); - - if (ioregs_init[i].bit_or & IO_PIN_OVER_HOLD) - mask |= IO_PIN_HOLD(3); - - if (ioregs_init[i].bit_or & IO_PIN_OVER_PULL) - mask |= IO_PIN_PUD(1) | IO_PIN_PUE(1); - - if (ioregs_init[i].bit_or & IO_PIN_OVER_STRIG) - mask |= IO_PIN_ST(1); - - if (ioregs_init[i].bit_or & IO_PIN_OVER_DRVSTR) - mask |= IO_PIN_DS(3); - /* - * DON'T do the "mask, then insert" - * in place on the register, it may - * break access to external hardware - * (like boot ROMs) when configuring - * LPB related pins, while the code to - * configure the pin is read from this - * very address region - */ - clrsetbits_be32(reg + j, mask, - ioregs_init[i].val & mask); - } - } - } -} diff --git a/arch/powerpc/cpu/mpc512x/pci.c b/arch/powerpc/cpu/mpc512x/pci.c deleted file mode 100644 index 7ea5df2960..0000000000 --- a/arch/powerpc/cpu/mpc512x/pci.c +++ /dev/null @@ -1,209 +0,0 @@ -/* - * Copyright (C) 2009-2010 DENX Software Engineering wd@denx.de - * Copyright (C) Freescale Semiconductor, Inc. 2006, 2007. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> - -#include <asm/io.h> -#include <asm/mmu.h> -#include <asm/global_data.h> -#include <pci.h> -#if defined(CONFIG_OF_LIBFDT) -#include <libfdt.h> -#include <fdt_support.h> -#endif - -DECLARE_GLOBAL_DATA_PTR; - -/* System RAM mapped to PCI space */ -#define CONFIG_PCI_SYS_MEM_BUS CONFIG_SYS_SDRAM_BASE -#define CONFIG_PCI_SYS_MEM_PHYS CONFIG_SYS_SDRAM_BASE - -static struct pci_controller pci_hose; - - -/************************************************************************** - * pci_init_board() - * - */ -void -pci_init_board(void) -{ - volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; - volatile law512x_t *pci_law; - volatile pot512x_t *pci_pot; - volatile pcictrl512x_t *pci_ctrl; - u16 reg16; - u32 reg32; - u32 dev; - int i; - struct pci_controller *hose; - - /* Set PCI divider for 33MHz */ - reg32 = in_be32(&im->clk.scfr[0]); - reg32 &= ~(SCFR1_PCI_DIV_MASK); - reg32 |= SCFR1_PCI_DIV << SCFR1_PCI_DIV_SHIFT; - out_be32(&im->clk.scfr[0], reg32); - - clrsetbits_be32(&im->clk.scfr[0], - SCFR1_PCI_DIV_MASK, - SCFR1_PCI_DIV << SCFR1_PCI_DIV_SHIFT - ); - - pci_law = im->sysconf.pcilaw; - pci_pot = im->ios.pot; - pci_ctrl = &im->pci_ctrl; - - hose = &pci_hose; - - /* - * Release PCI RST Output signal - */ - out_be32(&pci_ctrl->gcr, 0); - udelay(2000); - out_be32(&pci_ctrl->gcr, 1); - - /* We need to wait at least a 1sec based on PCI specs */ - for (i = 0; i < 1000; i++) - udelay(1000); - - /* - * Configure PCI Local Access Windows - */ - out_be32(&pci_law[0].bar, CONFIG_SYS_PCI_MEM_PHYS & LAWBAR_BAR); - out_be32(&pci_law[0].ar, LAWAR_EN | LAWAR_SIZE_512M); - - out_be32(&pci_law[1].bar, CONFIG_SYS_PCI_IO_PHYS & LAWBAR_BAR); - out_be32(&pci_law[1].ar, LAWAR_EN | LAWAR_SIZE_16M); - - /* - * Configure PCI Outbound Translation Windows - */ - - /* PCI mem space - prefetch */ - out_be32(&pci_pot[0].potar, - (CONFIG_SYS_PCI_MEM_BASE >> 12) & POTAR_TA_MASK); - out_be32(&pci_pot[0].pobar, - (CONFIG_SYS_PCI_MEM_PHYS >> 12) & POBAR_BA_MASK); - out_be32(&pci_pot[0].pocmr, - POCMR_EN | POCMR_PRE | POCMR_CM_256M); - - /* PCI IO space */ - out_be32(&pci_pot[1].potar, - (CONFIG_SYS_PCI_IO_BASE >> 12) & POTAR_TA_MASK); - out_be32(&pci_pot[1].pobar, - (CONFIG_SYS_PCI_IO_PHYS >> 12) & POBAR_BA_MASK); - out_be32(&pci_pot[1].pocmr, - POCMR_EN | POCMR_IO | POCMR_CM_16M); - - /* PCI mmio - non-prefetch mem space */ - out_be32(&pci_pot[2].potar, - (CONFIG_SYS_PCI_MMIO_BASE >> 12) & POTAR_TA_MASK); - out_be32(&pci_pot[2].pobar, - (CONFIG_SYS_PCI_MMIO_PHYS >> 12) & POBAR_BA_MASK); - out_be32(&pci_pot[2].pocmr, - POCMR_EN | POCMR_CM_256M); - - /* - * Configure PCI Inbound Translation Windows - */ - - /* we need RAM mapped to PCI space for the devices to - * access main memory */ - out_be32(&pci_ctrl[0].pitar1, 0x0); - out_be32(&pci_ctrl[0].pibar1, 0x0); - out_be32(&pci_ctrl[0].piebar1, 0x0); - out_be32(&pci_ctrl[0].piwar1, - PIWAR_EN | PIWAR_PF | PIWAR_RTT_SNOOP | - PIWAR_WTT_SNOOP | (__ilog2(gd->ram_size) - 1)); - - hose->first_busno = 0; - hose->last_busno = 0xff; - - /* PCI memory prefetch space */ - pci_set_region(hose->regions + 0, - CONFIG_SYS_PCI_MEM_BASE, - CONFIG_SYS_PCI_MEM_PHYS, - CONFIG_SYS_PCI_MEM_SIZE, - PCI_REGION_MEM|PCI_REGION_PREFETCH); - - /* PCI memory space */ - pci_set_region(hose->regions + 1, - CONFIG_SYS_PCI_MMIO_BASE, - CONFIG_SYS_PCI_MMIO_PHYS, - CONFIG_SYS_PCI_MMIO_SIZE, - PCI_REGION_MEM); - - /* PCI IO space */ - pci_set_region(hose->regions + 2, - CONFIG_SYS_PCI_IO_BASE, - CONFIG_SYS_PCI_IO_PHYS, - CONFIG_SYS_PCI_IO_SIZE, - PCI_REGION_IO); - - /* System memory space */ - pci_set_region(hose->regions + 3, - CONFIG_PCI_SYS_MEM_BUS, - CONFIG_PCI_SYS_MEM_PHYS, - gd->ram_size, - PCI_REGION_MEM | PCI_REGION_SYS_MEMORY); - - hose->region_count = 4; - - pci_setup_indirect(hose, - (CONFIG_SYS_IMMR + 0x8300), - (CONFIG_SYS_IMMR + 0x8304)); - - pci_register_hose(hose); - - /* - * Write to Command register - */ - reg16 = 0xff; - dev = PCI_BDF(hose->first_busno, 0, 0); - pci_hose_read_config_word(hose, dev, PCI_COMMAND, ®16); - reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; - pci_hose_write_config_word(hose, dev, PCI_COMMAND, reg16); - - /* - * Clear non-reserved bits in status register. - */ - pci_hose_write_config_word(hose, dev, PCI_STATUS, 0xffff); - pci_hose_write_config_byte(hose, dev, PCI_LATENCY_TIMER, 0x80); - pci_hose_write_config_byte(hose, dev, PCI_CACHE_LINE_SIZE, 0x08); - -#ifdef CONFIG_PCI_SCAN_SHOW - printf("PCI: Bus Dev VenId DevId Class Int\n"); -#endif - /* - * Hose scan. - */ - hose->last_busno = pci_hose_scan(hose); -} - -#if defined(CONFIG_OF_LIBFDT) -void ft_pci_setup(void *blob, bd_t *bd) -{ - int nodeoffset; - int tmp[2]; - const char *path; - - nodeoffset = fdt_path_offset(blob, "/aliases"); - if (nodeoffset >= 0) { - path = fdt_getprop(blob, nodeoffset, "pci", NULL); - if (path) { - tmp[0] = cpu_to_be32(pci_hose.first_busno); - tmp[1] = cpu_to_be32(pci_hose.last_busno); - do_fixup_by_path(blob, path, "bus-range", - &tmp, sizeof(tmp), 1); - - tmp[0] = cpu_to_be32(gd->pci_clk); - do_fixup_by_path(blob, path, "clock-frequency", - &tmp, sizeof(tmp[0]), 1); - } - } -} -#endif /* CONFIG_OF_LIBFDT */ diff --git a/arch/powerpc/cpu/mpc512x/serial.c b/arch/powerpc/cpu/mpc512x/serial.c deleted file mode 100644 index ac77ddcf4d..0000000000 --- a/arch/powerpc/cpu/mpc512x/serial.c +++ /dev/null @@ -1,431 +0,0 @@ -/* - * (C) Copyright 2000 - 2010 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - * - * Based ont the MPC5200 PSC driver. - * Adapted for MPC512x by Jan Wrobel wrr@semihalf.com - */ - -/* - * Minimal serial functions needed to use one of the PSC ports - * as serial console interface. - */ - -#include <common.h> -#include <linux/compiler.h> -#include <asm/io.h> -#include <asm/processor.h> -#include <serial.h> - -DECLARE_GLOBAL_DATA_PTR; - -#if defined(CONFIG_PSC_CONSOLE) - -static void fifo_init (volatile psc512x_t *psc) -{ - volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; - u32 tfsize, rfsize; - - /* reset Rx & Tx fifo slice */ - out_be32(&psc->rfcmd, PSC_FIFO_RESET_SLICE); - out_be32(&psc->tfcmd, PSC_FIFO_RESET_SLICE); - - /* disable Tx & Rx FIFO interrupts */ - out_be32(&psc->rfintmask, 0); - out_be32(&psc->tfintmask, 0); - - switch (((u32)psc & 0xf00) >> 8) { - case 0: - tfsize = FIFOC_PSC0_TX_SIZE | (FIFOC_PSC0_TX_ADDR << 16); - rfsize = FIFOC_PSC0_RX_SIZE | (FIFOC_PSC0_RX_ADDR << 16); - break; - case 1: - tfsize = FIFOC_PSC1_TX_SIZE | (FIFOC_PSC1_TX_ADDR << 16); - rfsize = FIFOC_PSC1_RX_SIZE | (FIFOC_PSC1_RX_ADDR << 16); - break; - case 2: - tfsize = FIFOC_PSC2_TX_SIZE | (FIFOC_PSC2_TX_ADDR << 16); - rfsize = FIFOC_PSC2_RX_SIZE | (FIFOC_PSC2_RX_ADDR << 16); - break; - case 3: - tfsize = FIFOC_PSC3_TX_SIZE | (FIFOC_PSC3_TX_ADDR << 16); - rfsize = FIFOC_PSC3_RX_SIZE | (FIFOC_PSC3_RX_ADDR << 16); - break; - case 4: - tfsize = FIFOC_PSC4_TX_SIZE | (FIFOC_PSC4_TX_ADDR << 16); - rfsize = FIFOC_PSC4_RX_SIZE | (FIFOC_PSC4_RX_ADDR << 16); - break; - case 5: - tfsize = FIFOC_PSC5_TX_SIZE | (FIFOC_PSC5_TX_ADDR << 16); - rfsize = FIFOC_PSC5_RX_SIZE | (FIFOC_PSC5_RX_ADDR << 16); - break; - case 6: - tfsize = FIFOC_PSC6_TX_SIZE | (FIFOC_PSC6_TX_ADDR << 16); - rfsize = FIFOC_PSC6_RX_SIZE | (FIFOC_PSC6_RX_ADDR << 16); - break; - case 7: - tfsize = FIFOC_PSC7_TX_SIZE | (FIFOC_PSC7_TX_ADDR << 16); - rfsize = FIFOC_PSC7_RX_SIZE | (FIFOC_PSC7_RX_ADDR << 16); - break; - case 8: - tfsize = FIFOC_PSC8_TX_SIZE | (FIFOC_PSC8_TX_ADDR << 16); - rfsize = FIFOC_PSC8_RX_SIZE | (FIFOC_PSC8_RX_ADDR << 16); - break; - case 9: - tfsize = FIFOC_PSC9_TX_SIZE | (FIFOC_PSC9_TX_ADDR << 16); - rfsize = FIFOC_PSC9_RX_SIZE | (FIFOC_PSC9_RX_ADDR << 16); - break; - case 10: - tfsize = FIFOC_PSC10_TX_SIZE | (FIFOC_PSC10_TX_ADDR << 16); - rfsize = FIFOC_PSC10_RX_SIZE | (FIFOC_PSC10_RX_ADDR << 16); - break; - case 11: - tfsize = FIFOC_PSC11_TX_SIZE | (FIFOC_PSC11_TX_ADDR << 16); - rfsize = FIFOC_PSC11_RX_SIZE | (FIFOC_PSC11_RX_ADDR << 16); - break; - default: - return; - } - - out_be32(&psc->tfsize, tfsize); - out_be32(&psc->rfsize, rfsize); - - /* enable Tx & Rx FIFO slice */ - out_be32(&psc->rfcmd, PSC_FIFO_ENABLE_SLICE); - out_be32(&psc->tfcmd, PSC_FIFO_ENABLE_SLICE); - - out_be32(&im->fifoc.fifoc_cmd, FIFOC_DISABLE_CLOCK_GATE); - __asm__ volatile ("sync"); -} - -void serial_setbrg_dev(unsigned int idx) -{ - volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; - volatile psc512x_t *psc = (psc512x_t *) &im->psc[idx]; - unsigned long baseclk, div; - unsigned long baudrate; - char buf[16]; - char *br_env; - - baudrate = gd->baudrate; - if (idx != CONFIG_PSC_CONSOLE) { - /* Allows setting baudrate for other serial devices - * on PSCx using environment. If not specified, use - * the same baudrate as for console. - */ - sprintf(buf, "psc%d_baudrate", idx); - br_env = getenv(buf); - if (br_env) - baudrate = simple_strtoul(br_env, NULL, 10); - - debug("%s: idx %d, baudrate %ld\n", __func__, idx, baudrate); - } - - /* calculate divisor for setting PSC CTUR and CTLR registers */ - baseclk = (gd->arch.ips_clk + 8) / 16; - div = (baseclk + (baudrate / 2)) / baudrate; - - out_8(&psc->ctur, (div >> 8) & 0xff); - out_8(&psc->ctlr, div & 0xff); /* set baudrate */ -} - -int serial_init_dev(unsigned int idx) -{ - volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; - volatile psc512x_t *psc = (psc512x_t *) &im->psc[idx]; - u32 reg; - - reg = in_be32(&im->clk.sccr[0]); - out_be32(&im->clk.sccr[0], reg | CLOCK_SCCR1_PSC_EN(idx)); - - fifo_init (psc); - - /* set MR register to point to MR1 */ - out_8(&psc->command, PSC_SEL_MODE_REG_1); - - /* disable Tx/Rx */ - out_8(&psc->command, PSC_TX_DISABLE | PSC_RX_DISABLE); - - /* choose the prescaler by 16 for the Tx/Rx clock generation */ - out_be16(&psc->psc_clock_select, 0xdd00); - - /* switch to UART mode */ - out_be32(&psc->sicr, 0); - - /* mode register points to mr1 */ - /* configure parity, bit length and so on in mode register 1*/ - out_8(&psc->mode, PSC_MODE_8_BITS | PSC_MODE_PARNONE); - /* now, mode register points to mr2 */ - out_8(&psc->mode, PSC_MODE_1_STOPBIT); - - /* set baudrate */ - serial_setbrg_dev(idx); - - /* disable all interrupts */ - out_be16(&psc->psc_imr, 0); - - /* reset and enable Rx/Tx */ - out_8(&psc->command, PSC_RST_RX); - out_8(&psc->command, PSC_RST_TX); - out_8(&psc->command, PSC_RX_ENABLE | PSC_TX_ENABLE); - - return 0; -} - -int serial_uninit_dev(unsigned int idx) -{ - volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; - volatile psc512x_t *psc = (psc512x_t *) &im->psc[idx]; - u32 reg; - - out_8(&psc->command, PSC_RX_DISABLE | PSC_TX_DISABLE); - reg = in_be32(&im->clk.sccr[0]); - reg &= ~CLOCK_SCCR1_PSC_EN(idx); - out_be32(&im->clk.sccr[0], reg); - - return 0; -} - -void serial_putc_dev(unsigned int idx, const char c) -{ - volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; - volatile psc512x_t *psc = (psc512x_t *) &im->psc[idx]; - - if (c == '\n') - serial_putc_dev(idx, '\r'); - - /* Wait for last character to go. */ - while (!(in_be16(&psc->psc_status) & PSC_SR_TXEMP)) - ; - - out_8(&psc->tfdata_8, c); -} - -void serial_puts_dev(unsigned int idx, const char *s) -{ - while (*s) - serial_putc_dev(idx, *s++); -} - -int serial_getc_dev(unsigned int idx) -{ - volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; - volatile psc512x_t *psc = (psc512x_t *) &im->psc[idx]; - - /* Wait for a character to arrive. */ - while (in_be32(&psc->rfstat) & PSC_FIFO_EMPTY) - ; - - return in_8(&psc->rfdata_8); -} - -int serial_tstc_dev(unsigned int idx) -{ - volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; - volatile psc512x_t *psc = (psc512x_t *) &im->psc[idx]; - - return !(in_be32(&psc->rfstat) & PSC_FIFO_EMPTY); -} - -void serial_setrts_dev(unsigned int idx, int s) -{ - volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; - volatile psc512x_t *psc = (psc512x_t *) &im->psc[idx]; - - if (s) { - /* Assert RTS (become LOW) */ - out_8(&psc->op1, 0x1); - } - else { - /* Negate RTS (become HIGH) */ - out_8(&psc->op0, 0x1); - } -} - -int serial_getcts_dev(unsigned int idx) -{ - volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; - volatile psc512x_t *psc = (psc512x_t *) &im->psc[idx]; - - return (in_8(&psc->ip) & 0x1) ? 0 : 1; -} -#endif /* CONFIG_PSC_CONSOLE */ - -#define DECLARE_PSC_SERIAL_FUNCTIONS(port) \ - int serial##port##_init(void) \ - { \ - return serial_init_dev(port); \ - } \ - int serial##port##_uninit(void) \ - { \ - return serial_uninit_dev(port); \ - } \ - void serial##port##_setbrg(void) \ - { \ - serial_setbrg_dev(port); \ - } \ - int serial##port##_getc(void) \ - { \ - return serial_getc_dev(port); \ - } \ - int serial##port##_tstc(void) \ - { \ - return serial_tstc_dev(port); \ - } \ - void serial##port##_putc(const char c) \ - { \ - serial_putc_dev(port, c); \ - } \ - void serial##port##_puts(const char *s) \ - { \ - serial_puts_dev(port, s); \ - } - -#define INIT_PSC_SERIAL_STRUCTURE(port, __name) { \ - .name = __name, \ - .start = serial##port##_init, \ - .stop = serial##port##_uninit, \ - .setbrg = serial##port##_setbrg, \ - .getc = serial##port##_getc, \ - .tstc = serial##port##_tstc, \ - .putc = serial##port##_putc, \ - .puts = serial##port##_puts, \ -} - -#if defined(CONFIG_SYS_PSC1) -DECLARE_PSC_SERIAL_FUNCTIONS(1); -struct serial_device serial1_device = -INIT_PSC_SERIAL_STRUCTURE(1, "psc1"); -#endif - -#if defined(CONFIG_SYS_PSC3) -DECLARE_PSC_SERIAL_FUNCTIONS(3); -struct serial_device serial3_device = -INIT_PSC_SERIAL_STRUCTURE(3, "psc3"); -#endif - -#if defined(CONFIG_SYS_PSC4) -DECLARE_PSC_SERIAL_FUNCTIONS(4); -struct serial_device serial4_device = -INIT_PSC_SERIAL_STRUCTURE(4, "psc4"); -#endif - -#if defined(CONFIG_SYS_PSC6) -DECLARE_PSC_SERIAL_FUNCTIONS(6); -struct serial_device serial6_device = -INIT_PSC_SERIAL_STRUCTURE(6, "psc6"); -#endif - -__weak struct serial_device *default_serial_console(void) -{ -#if (CONFIG_PSC_CONSOLE == 3) - return &serial3_device; -#elif (CONFIG_PSC_CONSOLE == 6) - return &serial6_device; -#else -#error "invalid CONFIG_PSC_CONSOLE" -#endif -} - -void mpc512x_serial_initialize(void) -{ -#if defined(CONFIG_SYS_PSC1) - serial_register(&serial1_device); -#endif -#if defined(CONFIG_SYS_PSC3) - serial_register(&serial3_device); -#endif -#if defined(CONFIG_SYS_PSC4) - serial_register(&serial4_device); -#endif -#if defined(CONFIG_SYS_PSC6) - serial_register(&serial6_device); -#endif -} - -#include <stdio_dev.h> -/* - * Routines for communication with serial devices over PSC - */ -/* Bitfield for initialized PSCs */ -static unsigned int initialized; - -struct stdio_dev *open_port(int num, int baudrate) -{ - struct stdio_dev *port; - char env_var[16]; - char env_val[10]; - char name[7]; - - if (num < 0 || num > 11) - return NULL; - - sprintf(name, "psc%d", num); - port = stdio_get_by_name(name); - if (!port) - return NULL; - - if (!test_bit(num, &initialized)) { - sprintf(env_var, "psc%d_baudrate", num); - sprintf(env_val, "%d", baudrate); - setenv(env_var, env_val); - - if (port->start(port)) - return NULL; - - set_bit(num, &initialized); - } - - return port; -} - -int close_port(int num) -{ - struct stdio_dev *port; - int ret; - char name[7]; - - if (num < 0 || num > 11) - return -1; - - sprintf(name, "psc%d", num); - port = stdio_get_by_name(name); - if (!port) - return -1; - - ret = port->stop(port); - clear_bit(num, &initialized); - - return ret; -} - -int write_port(struct stdio_dev *port, char *buf) -{ - if (!port || !buf) - return -1; - - port->puts(port, buf); - - return 0; -} - -int read_port(struct stdio_dev *port, char *buf, int size) -{ - int cnt = 0; - - if (!port || !buf) - return -1; - - if (!size) - return 0; - - while (port->tstc(port)) { - buf[cnt++] = port->getc(port); - if (cnt > size) - break; - } - - return cnt; -} diff --git a/arch/powerpc/cpu/mpc512x/speed.c b/arch/powerpc/cpu/mpc512x/speed.c deleted file mode 100644 index 95069cad84..0000000000 --- a/arch/powerpc/cpu/mpc512x/speed.c +++ /dev/null @@ -1,137 +0,0 @@ -/* - * (C) Copyright 2000-2009 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * Copyright (C) 2004-2006 Freescale Semiconductor, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - * - * Based on the MPC83xx code. - */ - -#include <common.h> -#include <command.h> -#include <asm/io.h> -#include <asm/processor.h> - -DECLARE_GLOBAL_DATA_PTR; - -static int spmf_mult[] = { - 68, 1, 12, 16, - 20, 24, 28, 32, - 36, 40, 44, 48, - 52, 56, 60, 64 -}; - -static int cpmf_mult[][2] = { - {0, 1}, {0, 1}, /* 0 and 1 are not valid */ - {1, 1}, {3, 2}, - {2, 1}, {5, 2}, - {3, 1}, {7, 2}, - {0, 1}, {0, 1}, /* and all above 7 are not valid too */ - {0, 1}, {0, 1}, - {0, 1}, {0, 1}, - {0, 1}, {0, 1} -}; - -static int sys_dividors[][2] = { - {2, 1}, {5, 2}, {3, 1}, {7, 2}, {4, 1}, - {9, 2}, {5, 1}, {7, 1}, {6, 1}, {8, 1}, - {9, 1}, {11, 1}, {10, 1}, {12, 1}, {13, 1}, - {15, 1}, {14, 1}, {16, 1}, {17, 1}, {19, 1}, - {18, 1}, {20, 1}, {21, 1}, {23, 1}, {22, 1}, - {24, 1}, {25, 1}, {27, 1}, {26, 1}, {28, 1}, - {29, 1}, {31, 1}, {30, 1}, {32, 1}, {33, 1} -}; - -int get_clocks (void) -{ - volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; - u8 spmf; - u8 cpmf; - u8 sys_div; - u8 ips_div; - u8 pci_div; - u32 ref_clk = CONFIG_SYS_MPC512X_CLKIN; - u32 spll; - u32 sys_clk; - u32 core_clk; - u32 csb_clk; - u32 ips_clk; - u32 pci_clk; - u32 reg; - - reg = in_be32(&im->sysconf.immrbar); - if ((reg & IMMRBAR_BASE_ADDR) != (u32) im) - return -1; - - reg = in_be32(&im->clk.spmr); - spmf = (reg & SPMR_SPMF) >> SPMR_SPMF_SHIFT; - spll = ref_clk * spmf_mult[spmf]; - - reg = in_be32(&im->clk.scfr[1]); - sys_div = (reg & SCFR2_SYS_DIV) >> SCFR2_SYS_DIV_SHIFT; - sys_clk = (spll * sys_dividors[sys_div][1]) / sys_dividors[sys_div][0]; - - csb_clk = sys_clk / 2; - - reg = in_be32(&im->clk.spmr); - cpmf = (reg & SPMR_CPMF) >> SPMR_CPMF_SHIFT; - core_clk = (csb_clk * cpmf_mult[cpmf][0]) / cpmf_mult[cpmf][1]; - - reg = in_be32(&im->clk.scfr[0]); - ips_div = (reg & SCFR1_IPS_DIV_MASK) >> SCFR1_IPS_DIV_SHIFT; - if (ips_div != 0) { - ips_clk = csb_clk / ips_div; - } else { - /* in case we cannot get a sane IPS divisor, fail gracefully */ - ips_clk = 0; - } - - reg = in_be32(&im->clk.scfr[0]); - pci_div = (reg & SCFR1_PCI_DIV_MASK) >> SCFR1_PCI_DIV_SHIFT; - if (pci_div != 0) { - pci_clk = csb_clk / pci_div; - } else { - /* in case we cannot get a sane IPS divisor, fail gracefully */ - pci_clk = 333333; - } - - gd->arch.ips_clk = ips_clk; - gd->pci_clk = pci_clk; - gd->arch.csb_clk = csb_clk; - gd->cpu_clk = core_clk; - gd->bus_clk = csb_clk; - return 0; - -} - -/******************************************** - * get_bus_freq - * return system bus freq in Hz - *********************************************/ -ulong get_bus_freq (ulong dummy) -{ - return gd->arch.csb_clk; -} - -int do_clocks (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) -{ - char buf[32]; - - printf("Clock configuration:\n"); - printf(" CPU: %-4s MHz\n", strmhz(buf, gd->cpu_clk)); - printf(" Coherent System Bus: %-4s MHz\n", - strmhz(buf, gd->arch.csb_clk)); - printf(" IPS Bus: %-4s MHz\n", - strmhz(buf, gd->arch.ips_clk)); - printf(" PCI: %-4s MHz\n", strmhz(buf, gd->pci_clk)); - printf(" DDR: %-4s MHz\n", - strmhz(buf, 2 * gd->arch.csb_clk)); - return 0; -} - -U_BOOT_CMD(clocks, 1, 0, do_clocks, - "print clock configuration", - " clocks" -); diff --git a/arch/powerpc/cpu/mpc512x/start.S b/arch/powerpc/cpu/mpc512x/start.S deleted file mode 100644 index dd3066ec4c..0000000000 --- a/arch/powerpc/cpu/mpc512x/start.S +++ /dev/null @@ -1,694 +0,0 @@ -/* - * Copyright (C) 1998 Dan Malek dmalek@jlc.net - * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se> - * Copyright (C) 2000-2009 Wolfgang Denk wd@denx.de - * Copyright Freescale Semiconductor, Inc. 2004, 2006. - * - * SPDX-License-Identifier: GPL-2.0+ - * - * Based on the MPC83xx code. - */ - -/* - * U-Boot - Startup Code for MPC512x based Embedded Boards - */ - -#include <asm-offsets.h> -#include <config.h> -#include <version.h> - -#define CONFIG_521X 1 /* needed for Linux kernel header files*/ - -#include <asm/immap_512x.h> -#include "asm-offsets.h" - -#include <ppc_asm.tmpl> -#include <ppc_defs.h> - -#include <asm/cache.h> -#include <asm/mmu.h> -#include <asm/u-boot.h> - -/* - * Floating Point enable, Machine Check and Recoverable Interr. - */ -#undef MSR_KERNEL -#ifdef DEBUG -#define MSR_KERNEL (MSR_FP|MSR_RI) -#else -#define MSR_KERNEL (MSR_FP|MSR_ME|MSR_RI) -#endif - -/* Macros for manipulating CSx_START/STOP */ -#define START_REG(start) ((start) >> 16) -#define STOP_REG(start, size) (((start) + (size) - 1) >> 16) - -/* - * Set up GOT: Global Offset Table - * - * Use r12 to access the GOT - */ - START_GOT - GOT_ENTRY(_GOT2_TABLE_) - GOT_ENTRY(_FIXUP_TABLE_) - - GOT_ENTRY(_start) - GOT_ENTRY(_start_of_vectors) - GOT_ENTRY(_end_of_vectors) - GOT_ENTRY(transfer_to_handler) - - GOT_ENTRY(__init_end) - GOT_ENTRY(__bss_end) - GOT_ENTRY(__bss_start) - END_GOT - -/* - * Magic number and version string - */ - .long 0x27051956 /* U-Boot Magic Number */ - .globl version_string -version_string: - .ascii U_BOOT_VERSION_STRING, "\0" - -/* - * Vector Table - */ - .text - . = EXC_OFF_SYS_RESET - - .globl _start - /* Start from here after reset/power on */ -_start: - b boot_cold - - .globl _start_of_vectors -_start_of_vectors: - -/* Machine check */ - STD_EXCEPTION(0x200, MachineCheck, MachineCheckException) - -/* Data Storage exception. */ - STD_EXCEPTION(0x300, DataStorage, UnknownException) - -/* Instruction Storage exception. */ - STD_EXCEPTION(0x400, InstStorage, UnknownException) - -/* External Interrupt exception. */ - STD_EXCEPTION(0x500, ExtInterrupt, UnknownException) - -/* Alignment exception. */ - . = 0x600 -Alignment: - EXCEPTION_PROLOG(SRR0, SRR1) - mfspr r4,DAR - stw r4,_DAR(r21) - mfspr r5,DSISR - stw r5,_DSISR(r21) - addi r3,r1,STACK_FRAME_OVERHEAD - EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE) - -/* Program check exception */ - . = 0x700 -ProgramCheck: - EXCEPTION_PROLOG(SRR0, SRR1) - addi r3,r1,STACK_FRAME_OVERHEAD - EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException, - MSR_KERNEL, COPY_EE) - -/* Floating Point Unit unavailable exception */ - STD_EXCEPTION(0x800, FPUnavailable, UnknownException) - -/* Decrementer */ - STD_EXCEPTION(0x900, Decrementer, timer_interrupt) - -/* Critical interrupt */ - STD_EXCEPTION(0xa00, Critical, UnknownException) - -/* System Call */ - STD_EXCEPTION(0xc00, SystemCall, UnknownException) - -/* Trace interrupt */ - STD_EXCEPTION(0xd00, Trace, UnknownException) - -/* Performance Monitor interrupt */ - STD_EXCEPTION(0xf00, PerfMon, UnknownException) - -/* Intruction Translation Miss */ - STD_EXCEPTION(0x1000, InstructionTLBMiss, UnknownException) - -/* Data Load Translation Miss */ - STD_EXCEPTION(0x1100, DataLoadTLBMiss, UnknownException) - -/* Data Store Translation Miss */ - STD_EXCEPTION(0x1200, DataStoreTLBMiss, UnknownException) - -/* Instruction Address Breakpoint */ - STD_EXCEPTION(0x1300, InstructionAddrBreakpoint, DebugException) - -/* System Management interrupt */ - STD_EXCEPTION(0x1400, SystemMgmtInterrupt, UnknownException) - - .globl _end_of_vectors -_end_of_vectors: - - . = 0x3000 -boot_cold: - /* Save msr contents */ - mfmsr r5 - - /* Set IMMR area to our preferred location */ - lis r4, CONFIG_DEFAULT_IMMR@h - lis r3, CONFIG_SYS_IMMR@h - ori r3, r3, CONFIG_SYS_IMMR@l - stw r3, IMMRBAR(r4) - mtspr MBAR, r3 /* IMMRBAR is mirrored into the MBAR SPR (311) */ - - /* Initialise the machine */ - bl cpu_early_init - - /* - * Set up Local Access Windows: - * - * 1) Boot/CS0 (boot FLASH) - * 2) On-chip SRAM (initial stack purposes) - */ - - /* Boot CS/CS0 window range */ - lis r3, CONFIG_SYS_IMMR@h - ori r3, r3, CONFIG_SYS_IMMR@l - - lis r4, START_REG(CONFIG_SYS_FLASH_BASE) - ori r4, r4, STOP_REG(CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_SIZE) - stw r4, LPCS0AW(r3) - - /* - * The SRAM window has a fixed size (256K), so only the start address - * is necessary - */ - lis r4, START_REG(CONFIG_SYS_SRAM_BASE) & 0xff00 - stw r4, SRAMBAR(r3) - - /* - * According to MPC5121e RM, configuring local access windows should - * be followed by a dummy read of the config register that was - * modified last and an isync - */ - lwz r4, SRAMBAR(r3) - isync - - /* - * Set configuration of the Boot/CS0, the SRAM window does not have a - * config register so no params can be set for it - */ - lis r3, (CONFIG_SYS_IMMR + LPC_OFFSET)@h - ori r3, r3, (CONFIG_SYS_IMMR + LPC_OFFSET)@l - - lis r4, CONFIG_SYS_CS0_CFG@h - ori r4, r4, CONFIG_SYS_CS0_CFG@l - stw r4, CS0_CONFIG(r3) - - /* Master enable all CS's */ - lis r4, CS_CTRL_ME@h - ori r4, r4, CS_CTRL_ME@l - stw r4, CS_CTRL(r3) - - lis r4, (CONFIG_SYS_MONITOR_BASE)@h - ori r4, r4, (CONFIG_SYS_MONITOR_BASE)@l - addi r5, r4, in_flash - _start + EXC_OFF_SYS_RESET - mtlr r5 - blr - -in_flash: - lis r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@h - ori r1, r1, (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET)@l - - li r0, 0 /* Make room for stack frame header and */ - stwu r0, -4(r1) /* clear final stack frame so that */ - stwu r0, -4(r1) /* stack backtraces terminate cleanly */ - - /* let the C-code set up the rest */ - /* */ - /* Be careful to keep code relocatable & stack humble */ - /*------------------------------------------------------*/ - - GET_GOT /* initialize GOT access */ - - /* r3: IMMR */ - lis r3, CONFIG_SYS_IMMR@h - /* run low-level CPU init code (in Flash) */ - bl cpu_init_f - - /* run 1st part of board init code (in Flash) */ - bl board_init_f - - /* NOTREACHED - board_init_f() does not return */ - -/* - * This code finishes saving the registers to the exception frame - * and jumps to the appropriate handler for the exception. - * Register r21 is pointer into trap frame, r1 has new stack pointer. - */ - .globl transfer_to_handler -transfer_to_handler: - stw r22,_NIP(r21) - lis r22,MSR_POW@h - andc r23,r23,r22 - stw r23,_MSR(r21) - SAVE_GPR(7, r21) - SAVE_4GPRS(8, r21) - SAVE_8GPRS(12, r21) - SAVE_8GPRS(24, r21) - mflr r23 - andi. r24,r23,0x3f00 /* get vector offset */ - stw r24,TRAP(r21) - li r22,0 - stw r22,RESULT(r21) - lwz r24,0(r23) /* virtual address of handler */ - lwz r23,4(r23) /* where to go when done */ - mtspr SRR0,r24 - mtspr SRR1,r20 - mtlr r23 - SYNC - rfi /* jump to handler, enable MMU */ - -int_return: - mfmsr r28 /* Disable interrupts */ - li r4,0 - ori r4,r4,MSR_EE - andc r28,r28,r4 - SYNC /* Some chip revs need this... */ - mtmsr r28 - SYNC - lwz r2,_CTR(r1) - lwz r0,_LINK(r1) - mtctr r2 - mtlr r0 - lwz r2,_XER(r1) - lwz r0,_CCR(r1) - mtspr XER,r2 - mtcrf 0xFF,r0 - REST_10GPRS(3, r1) - REST_10GPRS(13, r1) - REST_8GPRS(23, r1) - REST_GPR(31, r1) - lwz r2,_NIP(r1) /* Restore environment */ - lwz r0,_MSR(r1) - mtspr SRR0,r2 - mtspr SRR1,r0 - lwz r0,GPR0(r1) - lwz r2,GPR2(r1) - lwz r1,GPR1(r1) - SYNC - rfi - -/* - * This code initialises the machine, it expects original MSR contents to be in r5. - */ -cpu_early_init: - /* Initialize machine status; enable machine check interrupt */ - /*-----------------------------------------------------------*/ - - li r3, MSR_KERNEL /* Set ME and RI flags */ - rlwimi r3, r5, 0, 25, 25 /* preserve IP bit */ -#ifdef DEBUG - rlwimi r3, r5, 0, 21, 22 /* debugger might set SE, BE bits */ -#endif - mtmsr r3 - SYNC - mtspr SRR1, r3 /* Mirror current MSR state in SRR1 */ - - lis r3, CONFIG_SYS_IMMR@h - -#if defined(CONFIG_WATCHDOG) - /* Initialise the watchdog and reset it */ - /*--------------------------------------*/ - lis r4, CONFIG_SYS_WATCHDOG_VALUE - ori r4, r4, (SWCRR_SWEN | SWCRR_SWRI | SWCRR_SWPR) - stw r4, SWCRR(r3) - - /* reset */ - li r4, 0x556C - sth r4, SWSRR@l(r3) - li r4, 0x0 - ori r4, r4, 0xAA39 - sth r4, SWSRR@l(r3) -#else - /* Disable the watchdog */ - /*----------------------*/ - lwz r4, SWCRR(r3) - /* - * Check to see if it's enabled for disabling: once disabled by s/w - * it's not possible to re-enable it - */ - andi. r4, r4, 0x4 - beq 1f - xor r4, r4, r4 - stw r4, SWCRR(r3) -1: -#endif /* CONFIG_WATCHDOG */ - - /* Initialize the Hardware Implementation-dependent Registers */ - /* HID0 also contains cache control */ - /*------------------------------------------------------*/ - lis r3, CONFIG_SYS_HID0_INIT@h - ori r3, r3, CONFIG_SYS_HID0_INIT@l - SYNC - mtspr HID0, r3 - - lis r3, CONFIG_SYS_HID0_FINAL@h - ori r3, r3, CONFIG_SYS_HID0_FINAL@l - SYNC - mtspr HID0, r3 - - lis r3, CONFIG_SYS_HID2@h - ori r3, r3, CONFIG_SYS_HID2@l - SYNC - mtspr HID2, r3 - sync - blr - - -/* Cache functions. - * - * Note: requires that all cache bits in - * HID0 are in the low half word. - */ - .globl icache_enable -icache_enable: - mfspr r3, HID0 - ori r3, r3, HID0_ICE - lis r4, 0 - ori r4, r4, HID0_ILOCK - andc r3, r3, r4 - ori r4, r3, HID0_ICFI - isync - mtspr HID0, r4 /* sets enable and invalidate, clears lock */ - isync - mtspr HID0, r3 /* clears invalidate */ - blr - - .globl icache_disable -icache_disable: - mfspr r3, HID0 - lis r4, 0 - ori r4, r4, HID0_ICE|HID0_ILOCK - andc r3, r3, r4 - ori r4, r3, HID0_ICFI - isync - mtspr HID0, r4 /* sets invalidate, clears enable and lock*/ - isync - mtspr HID0, r3 /* clears invalidate */ - blr - - .globl icache_status -icache_status: - mfspr r3, HID0 - rlwinm r3, r3, (31 - HID0_ICE_SHIFT + 1), 31, 31 - blr - - .globl dcache_enable -dcache_enable: - mfspr r3, HID0 - li r5, HID0_DCFI|HID0_DLOCK - andc r3, r3, r5 - mtspr HID0, r3 /* no invalidate, unlock */ - ori r3, r3, HID0_DCE - ori r5, r3, HID0_DCFI - mtspr HID0, r5 /* enable + invalidate */ - mtspr HID0, r3 /* enable */ - sync - blr - - .globl dcache_disable -dcache_disable: - mfspr r3, HID0 - lis r4, 0 - ori r4, r4, HID0_DCE|HID0_DLOCK - andc r3, r3, r4 - ori r4, r3, HID0_DCI - sync - mtspr HID0, r4 /* sets invalidate, clears enable and lock */ - sync - mtspr HID0, r3 /* clears invalidate */ - blr - - .globl dcache_status -dcache_status: - mfspr r3, HID0 - rlwinm r3, r3, (31 - HID0_DCE_SHIFT + 1), 31, 31 - blr - - .globl get_pvr -get_pvr: - mfspr r3, PVR - blr - - .globl get_svr -get_svr: - mfspr r3, SVR - blr - -/*-------------------------------------------------------------------*/ - -/* - * void relocate_code (addr_sp, gd, addr_moni) - * - * This "function" does not return, instead it continues in RAM - * after relocating the monitor code. - * - * r3 = dest - * r4 = src - * r5 = length in bytes - * r6 = cachelinesize - */ - .globl relocate_code -relocate_code: - mr r1, r3 /* Set new stack pointer */ - mr r9, r4 /* Save copy of Global Data pointer */ - mr r10, r5 /* Save copy of Destination Address */ - - GET_GOT - mr r3, r5 /* Destination Address */ - lis r4, CONFIG_SYS_MONITOR_BASE@h /* Source Address */ - ori r4, r4, CONFIG_SYS_MONITOR_BASE@l - lwz r5, GOT(__init_end) - sub r5, r5, r4 - li r6, CONFIG_SYS_CACHELINE_SIZE /* Cache Line Size */ - - /* - * Fix GOT pointer: - * - * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) - * + Destination Address - * - * Offset: - */ - sub r15, r10, r4 - - /* First our own GOT */ - add r12, r12, r15 - /* then the one used by the C code */ - add r30, r30, r15 - - /* - * Now relocate code - */ - cmplw cr1,r3,r4 - addi r0,r5,3 - srwi. r0,r0,2 - beq cr1,4f /* In place copy is not necessary */ - beq 7f /* Protect against 0 count */ - mtctr r0 - bge cr1,2f - la r8,-4(r4) - la r7,-4(r3) - - /* copy */ -1: lwzu r0,4(r8) - stwu r0,4(r7) - bdnz 1b - - addi r0,r5,3 - srwi. r0,r0,2 - mtctr r0 - la r8,-4(r4) - la r7,-4(r3) - - /* and compare */ -20: lwzu r20,4(r8) - lwzu r21,4(r7) - xor. r22, r20, r21 - bne 30f - bdnz 20b - b 4f - - /* compare failed */ -30: li r3, 0 - blr - -2: slwi r0,r0,2 /* re copy in reverse order ... y do we needed it? */ - add r8,r4,r0 - add r7,r3,r0 -3: lwzu r0,-4(r8) - stwu r0,-4(r7) - bdnz 3b - -/* - * Now flush the cache: note that we must start from a cache aligned - * address. Otherwise we might miss one cache line. - */ -4: cmpwi r6,0 - add r5,r3,r5 - beq 7f /* Always flush prefetch queue in any case */ - subi r0,r6,1 - andc r3,r3,r0 - mr r4,r3 -5: dcbst 0,r4 - add r4,r4,r6 - cmplw r4,r5 - blt 5b - sync /* Wait for all dcbst to complete on bus */ - mr r4,r3 -6: icbi 0,r4 - add r4,r4,r6 - cmplw r4,r5 - blt 6b -7: sync /* Wait for all icbi to complete on bus */ - isync - -/* - * We are done. Do not return, instead branch to second part of board - * initialization, now running from RAM. - */ - addi r0, r10, in_ram - _start + EXC_OFF_SYS_RESET - mtlr r0 - blr - -in_ram: - /* - * Relocation Function, r12 point to got2+0x8000 - * - * Adjust got2 pointers, no need to check for 0, this code - * already puts a few entries in the table. - */ - li r0,__got2_entries@sectoff@l - la r3,GOT(_GOT2_TABLE_) - lwz r11,GOT(_GOT2_TABLE_) - mtctr r0 - sub r11,r3,r11 - addi r3,r3,-4 -1: lwzu r0,4(r3) - cmpwi r0,0 - beq- 2f - add r0,r0,r11 - stw r0,0(r3) -2: bdnz 1b - - /* - * Now adjust the fixups and the pointers to the fixups - * in case we need to move ourselves again. - */ - li r0,__fixup_entries@sectoff@l - lwz r3,GOT(_FIXUP_TABLE_) - cmpwi r0,0 - mtctr r0 - addi r3,r3,-4 - beq 4f -3: lwzu r4,4(r3) - lwzux r0,r4,r11 - cmpwi r0,0 - add r0,r0,r11 - stw r4,0(r3) - beq- 5f - stw r0,0(r4) -5: bdnz 3b -4: -clear_bss: - /* - * Now clear BSS segment - */ - lwz r3,GOT(__bss_start) - lwz r4,GOT(__bss_end) - - cmplw 0, r3, r4 - beq 6f - - li r0, 0 -5: - stw r0, 0(r3) - addi r3, r3, 4 - cmplw 0, r3, r4 - bne 5b -6: - mr r3, r9 /* Global Data pointer */ - mr r4, r10 /* Destination Address */ - bl board_init_r - - /* - * Copy exception vector code to low memory - * - * r3: dest_addr - * r7: source address, r8: end address, r9: target address - */ - .globl trap_init -trap_init: - mflr r4 /* save link register */ - GET_GOT - lwz r7, GOT(_start) - lwz r8, GOT(_end_of_vectors) - - li r9, 0x100 /* reset vector at 0x100 */ - - cmplw 0, r7, r8 - bgelr /* return if r7>=r8 - just in case */ -1: - lwz r0, 0(r7) - stw r0, 0(r9) - addi r7, r7, 4 - addi r9, r9, 4 - cmplw 0, r7, r8 - bne 1b - - /* - * relocate `hdlr' and `int_return' entries - */ - li r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET - li r8, Alignment - _start + EXC_OFF_SYS_RESET -2: - bl trap_reloc - addi r7, r7, 0x100 /* next exception vector */ - cmplw 0, r7, r8 - blt 2b - - li r7, .L_Alignment - _start + EXC_OFF_SYS_RESET - bl trap_reloc - - li r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET - bl trap_reloc - - li r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET - li r8, SystemCall - _start + EXC_OFF_SYS_RESET -3: - bl trap_reloc - addi r7, r7, 0x100 /* next exception vector */ - cmplw 0, r7, r8 - blt 3b - - li r7, .L_Trace - _start + EXC_OFF_SYS_RESET - li r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET -4: - bl trap_reloc - addi r7, r7, 0x100 /* next exception vector */ - cmplw 0, r7, r8 - blt 4b - - mfmsr r3 /* now that the vectors have */ - lis r7, MSR_IP@h /* relocated into low memory */ - ori r7, r7, MSR_IP@l /* MSR[IP] can be turned off */ - andc r3, r3, r7 /* (if it was on) */ - SYNC /* Some chip revs need this... */ - mtmsr r3 - SYNC - - mtlr r4 /* restore link register */ - blr diff --git a/arch/powerpc/cpu/mpc512x/traps.c b/arch/powerpc/cpu/mpc512x/traps.c deleted file mode 100644 index 9f5bcd7fc3..0000000000 --- a/arch/powerpc/cpu/mpc512x/traps.c +++ /dev/null @@ -1,190 +0,0 @@ -/* - * (C) Copyright 2000 - 2007 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) - * - * SPDX-License-Identifier: GPL-2.0+ - * - * Derived from the MPC83xx code. - */ - -/* - * This file handles the architecture-dependent parts of hardware - * exceptions - */ - -#include <common.h> -#include <kgdb.h> -#include <asm/processor.h> - -DECLARE_GLOBAL_DATA_PTR; - -extern unsigned long search_exception_table(unsigned long); - -/* - * End of addressable memory. This may be less than the actual - * amount of memory on the system if we're unable to keep all - * the memory mapped in. - */ -#define END_OF_MEM (gd->bd->bi_memstart + get_effective_memsize()) - -/* - * Trap & Exception support - */ - -static void print_backtrace(unsigned long *sp) -{ - int cnt = 0; - unsigned long i; - - puts("Call backtrace: "); - while (sp) { - if ((uint)sp > END_OF_MEM) - break; - - i = sp[1]; - if (cnt++ % 7 == 0) - putc('\n'); - printf("%08lX ", i); - if (cnt > 32) break; - sp = (unsigned long *) *sp; - } - putc('\n'); -} - -void show_regs(struct pt_regs *regs) -{ - int i; - - printf("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n", - regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar); - printf("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n", - regs->msr, regs->msr & MSR_EE ? 1 : 0, regs->msr & MSR_PR ? 1 : 0, - regs->msr & MSR_FP ? 1 : 0,regs->msr & MSR_ME ? 1 : 0, - regs->msr & MSR_IR ? 1 : 0, - regs->msr & MSR_DR ? 1 : 0); - - putc('\n'); - for (i = 0; i < 32; i++) { - if ((i % 8) == 0) { - printf("GPR%02d: ", i); - } - - printf("%08lX ", regs->gpr[i]); - if ((i % 8) == 7) { - putc('\n'); - } - } -} - - -static void _exception(int signr, struct pt_regs *regs) -{ - show_regs(regs); - print_backtrace((unsigned long *)regs->gpr[1]); - panic("Exception at pc %lx signal %d", regs->nip, signr); -} - - -void MachineCheckException(struct pt_regs *regs) -{ - unsigned long fixup = search_exception_table(regs->nip); - - if (fixup) { - regs->nip = fixup; - return; - } - -#ifdef CONFIG_CMD_KGDB - if (debugger_exception_handler && (*debugger_exception_handler)(regs)) - return; -#endif - - puts("Machine check.\nCaused by (from msr): "); - printf("regs %p ", regs); - switch (regs->msr & 0x00FF0000) { - case (0x80000000 >> 10): - puts("Instruction cache parity signal\n"); - break; - case (0x80000000 >> 11): - puts("Data cache parity signal\n"); - break; - case (0x80000000 >> 12): - puts("Machine check signal\n"); - break; - case (0x80000000 >> 13): - puts("Transfer error ack signal\n"); - break; - case (0x80000000 >> 14): - puts("Data parity signal\n"); - break; - case (0x80000000 >> 15): - puts("Address parity signal\n"); - break; - default: - puts("Unknown values in msr\n"); - } - show_regs(regs); - print_backtrace((unsigned long *)regs->gpr[1]); - - panic("machine check"); -} - -void AlignmentException(struct pt_regs *regs) -{ -#ifdef CONFIG_CMD_KGDB - if (debugger_exception_handler && (*debugger_exception_handler)(regs)) - return; -#endif - show_regs(regs); - print_backtrace((unsigned long *)regs->gpr[1]); - panic("Alignment Exception"); -} - -void ProgramCheckException(struct pt_regs *regs) -{ -#ifdef CONFIG_CMD_KGDB - if (debugger_exception_handler && (*debugger_exception_handler)(regs)) - return; -#endif - show_regs(regs); - print_backtrace((unsigned long *)regs->gpr[1]); - panic("Program Check Exception"); -} - -void SoftEmuException(struct pt_regs *regs) -{ -#ifdef CONFIG_CMD_KGDB - if (debugger_exception_handler && (*debugger_exception_handler)(regs)) - return; -#endif - show_regs(regs); - print_backtrace((unsigned long *)regs->gpr[1]); - panic("Software Emulation Exception"); -} - - -void UnknownException(struct pt_regs *regs) -{ -#ifdef CONFIG_CMD_KGDB - if (debugger_exception_handler && (*debugger_exception_handler)(regs)) - return; -#endif - printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n", - regs->nip, regs->msr, regs->trap); - _exception(0, regs); -} - -#ifdef CONFIG_CMD_BEDBUG -extern void do_bedbug_breakpoint(struct pt_regs *); -#endif - -void DebugException(struct pt_regs *regs) -{ - printf("Debugger trap at @ %lx\n", regs->nip); - show_regs(regs); -#ifdef CONFIG_CMD_BEDBUG - do_bedbug_breakpoint(regs); -#endif -} diff --git a/arch/powerpc/cpu/mpc512x/u-boot.lds b/arch/powerpc/cpu/mpc512x/u-boot.lds deleted file mode 100644 index b32f74e002..0000000000 --- a/arch/powerpc/cpu/mpc512x/u-boot.lds +++ /dev/null @@ -1,73 +0,0 @@ -/* - * (C) Copyright 2007-2010 DENX Software Engineering. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(powerpc) -SECTIONS -{ - .text : - { - arch/powerpc/cpu/mpc512x/start.o (.text*) - *(.text*) - . = ALIGN(16); - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - - /* Read-write section, merged into data segment: */ - . = (. + 0x0FFF) & 0xFFFFF000; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - _GOT2_TABLE_ = .; - KEEP(*(.got2)) - KEEP(*(.got)) - _FIXUP_TABLE_ = .; - KEEP(*(.fixup)) - *(.fixup) - } - __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; - __fixup_entries = (. - _FIXUP_TABLE_) >> 2; - - .data : - { - *(.data*) - *(.sdata*) - } - _edata = .; - PROVIDE (edata = .); - - . = .; - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(4096); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(4096); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.bss*) - *(.sbss*) - *(COMMON) - . = ALIGN(4); - } - __bss_end = . ; - PROVIDE (end = .); -} -ENTRY(_start) diff --git a/arch/powerpc/cpu/mpc5xxx/Kconfig b/arch/powerpc/cpu/mpc5xxx/Kconfig deleted file mode 100644 index 6ba0dd492d..0000000000 --- a/arch/powerpc/cpu/mpc5xxx/Kconfig +++ /dev/null @@ -1,90 +0,0 @@ -menu "mpc5xxx CPU" - depends on MPC5xxx - -config SYS_CPU - default "mpc5xxx" - -choice - prompt "Target select" - optional - -config TARGET_A3M071 - bool "Support a3m071" - select SUPPORT_SPL - -config TARGET_A4M072 - bool "Support a4m072" - -config TARGET_CANMB - bool "Support canmb" - -config TARGET_CM5200 - bool "Support cm5200" - -config TARGET_INKA4X0 - bool "Support inka4x0" - -config TARGET_IPEK01 - bool "Support ipek01" - -config TARGET_JUPITER - bool "Support jupiter" - -config TARGET_MOTIONPRO - bool "Support motionpro" - -config TARGET_MUNICES - bool "Support munices" - -config TARGET_V38B - bool "Support v38b" - -config TARGET_O2D - bool "Support O2D" - -config TARGET_O2D300 - bool "Support O2D300" - -config TARGET_O2DNT2 - bool "Support O2DNT2" - -config TARGET_O2I - bool "Support O2I" - -config TARGET_O2MNT - bool "Support O2MNT" - -config TARGET_O3DNT - bool "Support O3DNT" - -config TARGET_DIGSY_MTC - bool "Support digsy_mtc" - imply CMD_IRQ - -config TARGET_PCM030 - bool "Support pcm030" - -config TARGET_CHARON - bool "Support charon" - -config TARGET_TQM5200 - bool "Support TQM5200" - -endchoice - -source "board/a3m071/Kconfig" -source "board/a4m072/Kconfig" -source "board/canmb/Kconfig" -source "board/cm5200/Kconfig" -source "board/ifm/o2dnt2/Kconfig" -source "board/inka4x0/Kconfig" -source "board/intercontrol/digsy_mtc/Kconfig" -source "board/ipek01/Kconfig" -source "board/jupiter/Kconfig" -source "board/motionpro/Kconfig" -source "board/munices/Kconfig" -source "board/phytec/pcm030/Kconfig" -source "board/tqc/tqm5200/Kconfig" -source "board/v38b/Kconfig" - -endmenu diff --git a/arch/powerpc/cpu/mpc5xxx/Makefile b/arch/powerpc/cpu/mpc5xxx/Makefile deleted file mode 100644 index 88e3b2e3ae..0000000000 --- a/arch/powerpc/cpu/mpc5xxx/Makefile +++ /dev/null @@ -1,25 +0,0 @@ -# -# (C) Copyright 2003-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -extra-y = start.o -extra-y += traps.o -obj-y += io.o -obj-y += firmware_sc_task_bestcomm.impl.o -obj-y += cpu.o -obj-y += cpu_init.o -obj-y += ide.o -obj-y += interrupts.o -obj-y += loadtask.o -obj-y += pci_mpc5200.o -obj-y += serial.o -obj-y += speed.o -obj-$(CONFIG_CMD_USB) += usb_ohci.o -obj-$(CONFIG_CMD_USB) += usb.o - -ifdef CONFIG_SPL_BUILD -obj-y += spl_boot.o -endif diff --git a/arch/powerpc/cpu/mpc5xxx/config.mk b/arch/powerpc/cpu/mpc5xxx/config.mk deleted file mode 100644 index bcff2144a1..0000000000 --- a/arch/powerpc/cpu/mpc5xxx/config.mk +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2003-2010 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -PLATFORM_CPPFLAGS += -mstring -mcpu=603e -mmultiple diff --git a/arch/powerpc/cpu/mpc5xxx/cpu.c b/arch/powerpc/cpu/mpc5xxx/cpu.c deleted file mode 100644 index 84fabbd473..0000000000 --- a/arch/powerpc/cpu/mpc5xxx/cpu.c +++ /dev/null @@ -1,168 +0,0 @@ -/* - * (C) Copyright 2000-2010 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * CPU specific code for the MPC5xxx CPUs - */ - -#include <common.h> -#include <watchdog.h> -#include <command.h> -#include <net.h> -#include <mpc5xxx.h> -#include <netdev.h> -#include <asm/io.h> -#include <asm/processor.h> - -#if defined(CONFIG_OF_LIBFDT) -#include <libfdt.h> -#include <fdt_support.h> -#endif - -#if defined(CONFIG_OF_IDE_FIXUP) -#include <ide.h> -#endif - -DECLARE_GLOBAL_DATA_PTR; - -int checkcpu (void) -{ - ulong clock = gd->cpu_clk; - char buf[32]; - uint svr, pvr; - - puts ("CPU: "); - - svr = get_svr(); - pvr = get_pvr(); - - switch (pvr) { - case PVR_5200: - printf("MPC5200"); - break; - case PVR_5200B: - printf("MPC5200B"); - break; - default: - printf("Unknown MPC5xxx"); - break; - } - - printf (" v%d.%d, Core v%d.%d", SVR_MJREV (svr), SVR_MNREV (svr), - PVR_MAJ(pvr), PVR_MIN(pvr)); - printf (" at %s MHz\n", strmhz (buf, clock)); - return 0; -} - -/* ------------------------------------------------------------------------- */ - -int -do_reset (cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[]) -{ - ulong msr; - /* Interrupts and MMU off */ - __asm__ __volatile__ ("mfmsr %0":"=r" (msr):); - - msr &= ~(MSR_ME | MSR_EE | MSR_IR | MSR_DR); - __asm__ __volatile__ ("mtmsr %0"::"r" (msr)); - - /* Charge the watchdog timer */ - *(vu_long *)(MPC5XXX_GPT0_COUNTER) = 0x0001000f; - *(vu_long *)(MPC5XXX_GPT0_ENABLE) = 0x9004; /* wden|ce|timer_ms */ - while(1); - - return 1; - -} - -/* ------------------------------------------------------------------------- */ - -/* - * Get timebase clock frequency (like cpu_clk in Hz) - * - */ -unsigned long get_tbclk (void) -{ - ulong tbclk; - - tbclk = (gd->bus_clk + 3L) / 4L; - - return (tbclk); -} - -/* ------------------------------------------------------------------------- */ - -#ifdef CONFIG_OF_BOARD_SETUP -void ft_cpu_setup(void *blob, bd_t *bd) -{ - int div = in_8((void*)CONFIG_SYS_MBAR + 0x204) & 0x0020 ? 8 : 4; - char * cpu_path = "/cpus/" OF_CPU; -#ifdef CONFIG_MPC5xxx_FEC - uchar enetaddr[6]; - char * eth_path = "/" OF_SOC "/ethernet@3000"; -#endif - - do_fixup_by_path_u32(blob, cpu_path, "timebase-frequency", OF_TBCLK, 1); - do_fixup_by_path_u32(blob, cpu_path, "bus-frequency", bd->bi_busfreq, 1); - do_fixup_by_path_u32(blob, cpu_path, "clock-frequency", bd->bi_intfreq, 1); - do_fixup_by_path_u32(blob, "/" OF_SOC, "bus-frequency", bd->bi_ipbfreq, 1); - do_fixup_by_path_u32(blob, "/" OF_SOC, "system-frequency", - bd->bi_busfreq*div, 1); -#ifdef CONFIG_MPC5xxx_FEC - eth_getenv_enetaddr("ethaddr", enetaddr); - do_fixup_by_path(blob, eth_path, "mac-address", enetaddr, 6, 0); - do_fixup_by_path(blob, eth_path, "local-mac-address", enetaddr, 6, 0); -#endif -#ifdef CONFIG_OF_IDE_FIXUP - if (!ide_device_present(0)) { - /* NO CF card detected -> delete ata node in DTS */ - int nodeoffset = 0; - char nodename[] = "/soc5200@f0000000/ata@3a00"; - - nodeoffset = fdt_path_offset(blob, nodename); - if (nodeoffset >= 0) { - fdt_del_node(blob, nodeoffset); - } else { - printf("%s: cannot find %s node err:%s\n", - __func__, nodename, fdt_strerror(nodeoffset)); - } - } - -#endif /* CONFIG_OF_IDE_FIXUP */ - fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize); -} -#endif /* CONFIG_OF_BOARD_SETUP */ - -#ifdef CONFIG_MPC5xxx_FEC -/* Default initializations for FEC controllers. To override, - * create a board-specific function called: - * int board_eth_init(bd_t *bis) - */ - -int cpu_eth_init(bd_t *bis) -{ - return mpc5xxx_fec_initialize(bis); -} -#endif - -#if defined(CONFIG_WATCHDOG) -void watchdog_reset(void) -{ - int re_enable = disable_interrupts(); - reset_5xxx_watchdog(); - if (re_enable) enable_interrupts(); -} - -void reset_5xxx_watchdog(void) -{ - volatile struct mpc5xxx_gpt *gpt0 = - (struct mpc5xxx_gpt *) MPC5XXX_GPT; - - /* Trigger TIMER_0 by writing A5 to OCPW */ - clrsetbits_be32(&gpt0->emsr, 0xff000000, 0xa5000000); -} -#endif /* CONFIG_WATCHDOG */ diff --git a/arch/powerpc/cpu/mpc5xxx/cpu_init.c b/arch/powerpc/cpu/mpc5xxx/cpu_init.c deleted file mode 100644 index f9b57baf6d..0000000000 --- a/arch/powerpc/cpu/mpc5xxx/cpu_init.c +++ /dev/null @@ -1,231 +0,0 @@ -/* - * (C) Copyright 2000-2010 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <mpc5xxx.h> -#include <asm/io.h> -#include <watchdog.h> - -DECLARE_GLOBAL_DATA_PTR; - -/* - * Breath some life into the CPU... - * - * Set up the memory map, - * initialize a bunch of registers. - */ -void cpu_init_f (void) -{ - volatile struct mpc5xxx_mmap_ctl *mm = - (struct mpc5xxx_mmap_ctl *) CONFIG_SYS_MBAR; - volatile struct mpc5xxx_lpb *lpb = - (struct mpc5xxx_lpb *) MPC5XXX_LPB; - volatile struct mpc5xxx_gpio *gpio = - (struct mpc5xxx_gpio *) MPC5XXX_GPIO; - volatile struct mpc5xxx_xlb *xlb = - (struct mpc5xxx_xlb *) MPC5XXX_XLBARB; -#if defined(CONFIG_SYS_IPBCLK_EQUALS_XLBCLK) - volatile struct mpc5xxx_cdm *cdm = - (struct mpc5xxx_cdm *) MPC5XXX_CDM; -#endif /* CONFIG_SYS_IPBCLK_EQUALS_XLBCLK */ -#if defined(CONFIG_WATCHDOG) - volatile struct mpc5xxx_gpt *gpt0 = - (struct mpc5xxx_gpt *) MPC5XXX_GPT; -#endif /* CONFIG_WATCHDOG */ - unsigned long addecr = (1 << 25); /* Boot_CS */ - /* Pointer is writable since we allocated a register for it */ - gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET); - - /* Clear initial global data */ - memset ((void *) gd, 0, sizeof (gd_t)); - - /* - * Memory Controller: configure chip selects and enable them - */ -#if defined(CONFIG_SYS_BOOTCS_START) && defined(CONFIG_SYS_BOOTCS_SIZE) - out_be32(&mm->boot_start, START_REG(CONFIG_SYS_BOOTCS_START)); - out_be32(&mm->boot_stop, STOP_REG(CONFIG_SYS_BOOTCS_START, - CONFIG_SYS_BOOTCS_SIZE)); -#endif -#if defined(CONFIG_SYS_BOOTCS_CFG) - out_be32(&lpb->cs0_cfg, CONFIG_SYS_BOOTCS_CFG); -#endif - -#if defined(CONFIG_SYS_CS0_START) && defined(CONFIG_SYS_CS0_SIZE) - out_be32(&mm->cs0_start, START_REG(CONFIG_SYS_CS0_START)); - out_be32(&mm->cs0_stop, STOP_REG(CONFIG_SYS_CS0_START, - CONFIG_SYS_CS0_SIZE)); - /* CS0 and BOOT_CS cannot be enabled at once. */ - /* addecr |= (1 << 16); */ -#endif -#if defined(CONFIG_SYS_CS0_CFG) - out_be32(&lpb->cs0_cfg, CONFIG_SYS_CS0_CFG); -#endif - -#if defined(CONFIG_SYS_CS1_START) && defined(CONFIG_SYS_CS1_SIZE) - out_be32(&mm->cs1_start, START_REG(CONFIG_SYS_CS1_START)); - out_be32(&mm->cs1_stop, STOP_REG(CONFIG_SYS_CS1_START, - CONFIG_SYS_CS1_SIZE)); - addecr |= (1 << 17); -#endif -#if defined(CONFIG_SYS_CS1_CFG) - out_be32(&lpb->cs1_cfg, CONFIG_SYS_CS1_CFG); -#endif - -#if defined(CONFIG_SYS_CS2_START) && defined(CONFIG_SYS_CS2_SIZE) - out_be32(&mm->cs2_start, START_REG(CONFIG_SYS_CS2_START)); - out_be32(&mm->cs2_stop, STOP_REG(CONFIG_SYS_CS2_START, - CONFIG_SYS_CS2_SIZE)); - addecr |= (1 << 18); -#endif -#if defined(CONFIG_SYS_CS2_CFG) - out_be32(&lpb->cs2_cfg, CONFIG_SYS_CS2_CFG); -#endif - -#if defined(CONFIG_SYS_CS3_START) && defined(CONFIG_SYS_CS3_SIZE) - out_be32(&mm->cs3_start, START_REG(CONFIG_SYS_CS3_START)); - out_be32(&mm->cs3_stop, STOP_REG(CONFIG_SYS_CS3_START, - CONFIG_SYS_CS3_SIZE)); - addecr |= (1 << 19); -#endif -#if defined(CONFIG_SYS_CS3_CFG) - out_be32(&lpb->cs3_cfg, CONFIG_SYS_CS3_CFG); -#endif - -#if defined(CONFIG_SYS_CS4_START) && defined(CONFIG_SYS_CS4_SIZE) - out_be32(&mm->cs4_start, START_REG(CONFIG_SYS_CS4_START)); - out_be32(&mm->cs4_stop, STOP_REG(CONFIG_SYS_CS4_START, - CONFIG_SYS_CS4_SIZE)); - addecr |= (1 << 20); -#endif -#if defined(CONFIG_SYS_CS4_CFG) - out_be32(&lpb->cs4_cfg, CONFIG_SYS_CS4_CFG); -#endif - -#if defined(CONFIG_SYS_CS5_START) && defined(CONFIG_SYS_CS5_SIZE) - out_be32(&mm->cs5_start, START_REG(CONFIG_SYS_CS5_START)); - out_be32(&mm->cs5_stop, STOP_REG(CONFIG_SYS_CS5_START, - CONFIG_SYS_CS5_SIZE)); - addecr |= (1 << 21); -#endif -#if defined(CONFIG_SYS_CS5_CFG) - out_be32(&lpb->cs5_cfg, CONFIG_SYS_CS5_CFG); -#endif - - addecr |= 1; -#if defined(CONFIG_SYS_CS6_START) && defined(CONFIG_SYS_CS6_SIZE) - out_be32(&mm->cs6_start, START_REG(CONFIG_SYS_CS6_START)); - out_be32(&mm->cs6_stop, STOP_REG(CONFIG_SYS_CS6_START, - CONFIG_SYS_CS6_SIZE)); - addecr |= (1 << 26); -#endif -#if defined(CONFIG_SYS_CS6_CFG) - out_be32(&lpb->cs6_cfg, CONFIG_SYS_CS6_CFG); -#endif - -#if defined(CONFIG_SYS_CS7_START) && defined(CONFIG_SYS_CS7_SIZE) - out_be32(&mm->cs7_start, START_REG(CONFIG_SYS_CS7_START)); - out_be32(&mm->cs7_stop, STOP_REG(CONFIG_SYS_CS7_START, - CONFIG_SYS_CS7_SIZE)); - addecr |= (1 << 27); -#endif -#if defined(CONFIG_SYS_CS7_CFG) - out_be32(&lpb->cs7_cfg, CONFIG_SYS_CS7_CFG); -#endif - -#if defined(CONFIG_SYS_CS_BURST) - out_be32(&lpb->cs_burst, CONFIG_SYS_CS_BURST); -#endif -#if defined(CONFIG_SYS_CS_DEADCYCLE) - out_be32(&lpb->cs_deadcycle, CONFIG_SYS_CS_DEADCYCLE); -#endif - - /* Enable chip selects */ - out_be32(&mm->ipbi_ws_ctrl, addecr); - out_be32(&lpb->cs_ctrl, (1 << 24)); - - /* Setup pin multiplexing */ -#if defined(CONFIG_SYS_GPS_PORT_CONFIG) - out_be32(&gpio->port_config, CONFIG_SYS_GPS_PORT_CONFIG); -#endif - - /* Setup gpios */ -#if defined(CONFIG_SYS_GPIO_DATADIR) - out_be32(&gpio->simple_ddr, CONFIG_SYS_GPIO_DATADIR); -#endif -#if defined(CONFIG_SYS_GPIO_OPENDRAIN) - out_be32(&gpio->simple_ode, CONFIG_SYS_GPIO_OPENDRAIN); -#endif -#if defined(CONFIG_SYS_GPIO_DATAVALUE) - out_be32(&gpio->simple_dvo, CONFIG_SYS_GPIO_DATAVALUE); -#endif -#if defined(CONFIG_SYS_GPIO_ENABLE) - out_be32(&gpio->simple_gpioe, CONFIG_SYS_GPIO_ENABLE); -#endif - - /* enable timebase */ - setbits_be32(&xlb->config, (1 << 13)); - - /* Enable snooping for RAM */ - setbits_be32(&xlb->config, (1 << 15)); - out_be32(&xlb->snoop_window, CONFIG_SYS_SDRAM_BASE | 0x1d); - -#if defined(CONFIG_SYS_IPBCLK_EQUALS_XLBCLK) - /* Motorola reports IPB should better run at 133 MHz. */ - setbits_be32(&mm->ipbi_ws_ctrl, 1); - /* pci_clk_sel = 0x02, ipb_clk_sel = 0x00; */ - addecr = in_be32(&cdm->cfg); - addecr &= ~0x103; -# if defined(CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2) - /* pci_clk_sel = 0x01 -> IPB_CLK/2 */ - addecr |= 0x01; -# else - /* pci_clk_sel = 0x02 -> XLB_CLK/4 = IPB_CLK/4 */ - addecr |= 0x02; -# endif /* CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2 */ - out_be32(&cdm->cfg, addecr); -#endif /* CONFIG_SYS_IPBCLK_EQUALS_XLBCLK */ - /* Configure the XLB Arbiter */ - out_be32(&xlb->master_pri_enable, 0xff); - out_be32(&xlb->master_priority, 0x11111111); - -#if defined(CONFIG_SYS_XLB_PIPELINING) - /* Enable piplining */ - clrbits_be32(&xlb->config, (1 << 31)); -#endif - -#if defined(CONFIG_WATCHDOG) - /* Charge the watchdog timer - prescaler = 64k, count = 64k*/ - out_be32(&gpt0->cir, 0x0000ffff); - out_be32(&gpt0->emsr, 0x9004); /* wden|ce|timer_ms */ - - reset_5xxx_watchdog(); -#endif /* CONFIG_WATCHDOG */ -} - -/* - * initialize higher level parts of CPU like time base and timers - */ -int cpu_init_r (void) -{ - volatile struct mpc5xxx_intr *intr = - (struct mpc5xxx_intr *) MPC5XXX_ICTL; - - /* mask all interrupts */ - out_be32(&intr->per_mask, 0xffffff00); - setbits_be32(&intr->main_mask, 0x0001ffff); - clrbits_be32(&intr->ctrl, 0x00000f00); - /* route critical ints to normal ints */ - setbits_be32(&intr->ctrl, 0x00000001); - -#if defined(CONFIG_CMD_NET) && defined(CONFIG_MPC5xxx_FEC) - /* load FEC microcode */ - loadtask(0, 2); -#endif - - return (0); -} diff --git a/arch/powerpc/cpu/mpc5xxx/firmware_sc_task_bestcomm.impl.S b/arch/powerpc/cpu/mpc5xxx/firmware_sc_task_bestcomm.impl.S deleted file mode 100644 index 00c23121ac..0000000000 --- a/arch/powerpc/cpu/mpc5xxx/firmware_sc_task_bestcomm.impl.S +++ /dev/null @@ -1,359 +0,0 @@ -/* - * Copyright (C) 2001, Software Center, Motorola China. - * - * This file contains microcode for the FEC controller of the MPC5200 CPU. - */ - -#include <config.h> - -/* sas/sccg, gas target */ -.section smartdmaInitData,"aw",@progbits /* Initialized data for task variables */ -.section smartdmaTaskTable,"aw",@progbits /* Task tables */ -.align 9 -.globl taskTable -taskTable: -.globl scEthernetRecv_Entry -scEthernetRecv_Entry: /* Task 0 */ -.long scEthernetRecv_TDT - taskTable /* Task 0 Descriptor Table */ -.long scEthernetRecv_TDT - taskTable + 0x000000a4 -.long scEthernetRecv_VarTab - taskTable /* Task 0 Variable Table */ -.long scEthernetRecv_FDT - taskTable + 0x03 /* Task 0 Function Descriptor Table & Flags */ -.long 0x00000000 -.long 0x00000000 -.long scEthernetRecv_CSave - taskTable /* Task 0 context save space */ -.long CONFIG_SYS_MBAR -.globl scEthernetXmit_Entry -scEthernetXmit_Entry: /* Task 1 */ -.long scEthernetXmit_TDT - taskTable /* Task 1 Descriptor Table */ -.long scEthernetXmit_TDT - taskTable + 0x000000d0 -.long scEthernetXmit_VarTab - taskTable /* Task 1 Variable Table */ -.long scEthernetXmit_FDT - taskTable + 0x03 /* Task 1 Function Descriptor Table & Flags */ -.long 0x00000000 -.long 0x00000000 -.long scEthernetXmit_CSave - taskTable /* Task 1 context save space */ -.long CONFIG_SYS_MBAR - - -.globl scEthernetRecv_TDT -scEthernetRecv_TDT: /* Task 0 Descriptor Table */ -.long 0xc4c50000 /* 0000: LCDEXT: idx0 = var9 + var10; idx0 once var0; idx0 += inc0 */ -.long 0x84c5e000 /* 0004: LCD: idx1 = var9 + var11; ; idx1 += inc0 */ -.long 0x10001f08 /* 0008: DRD1A: var7 = idx1; FN=0 MORE init=0 WS=0 RS=0 */ -.long 0x10000380 /* 000C: DRD1A: var0 = *idx0; FN=0 MORE init=0 WS=0 RS=0 */ -.long 0x00000f88 /* 0010: DRD1A: var3 = *idx1; FN=0 init=0 WS=0 RS=0 */ -.long 0x81980000 /* 0014: LCD: idx0 = var3; idx0 once var0; idx0 += inc0 */ -.long 0x10000780 /* 0018: DRD1A: var1 = *idx0; FN=0 MORE init=0 WS=0 RS=0 */ -.long 0x60000000 /* 001C: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */ -.long 0x010cf04c /* 0020: DRD2B1: var4 = EU3(); EU3(var1,var12) */ -.long 0x82180349 /* 0024: LCD: idx0 = var4; idx0 != var13; idx0 += inc1 */ -.long 0x81c68004 /* 0028: LCD: idx1 = var3 + var13 + 4; idx1 once var0; idx1 += inc0 */ -.long 0x70000000 /* 002C: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */ -.long 0x018cf04e /* 0030: DRD2B1: var6 = EU3(); EU3(var1,var14) */ -.long 0x70000000 /* 0034: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */ -.long 0x020cf04f /* 0038: DRD2B1: var8 = EU3(); EU3(var1,var15) */ -.long 0x00000b88 /* 003C: DRD1A: var2 = *idx1; FN=0 init=0 WS=0 RS=0 */ -.long 0x8000d184 /* 0040: LCDEXT: idx1 = 0xf0003184; ; */ -.long 0xc6990452 /* 0044: LCDEXT: idx2 = var13; idx2 < var17; idx2 += inc2 */ -.long 0x81486010 /* 0048: LCD: idx3 = var2 + var16; ; idx3 += inc2 */ -.long 0x006acf88 /* 004C: DRD1A: *idx3 = *idx1; FN=0 init=3 WS=1 RS=1 */ -.long 0x8000d184 /* 0050: LCDEXT: idx1 = 0xf0003184; ; */ -.long 0x86810492 /* 0054: LCD: idx2 = var13, idx3 = var2; idx2 < var18; idx2 += inc2, idx3 += inc2 */ -.long 0x006acf88 /* 0058: DRD1A: *idx3 = *idx1; FN=0 init=3 WS=1 RS=1 */ -.long 0x8000d184 /* 005C: LCDEXT: idx1 = 0xf0003184; ; */ -.long 0x868184d2 /* 0060: LCD: idx2 = var13, idx3 = var3; idx2 < var19; idx2 += inc2, idx3 += inc2 */ -.long 0x000acf88 /* 0064: DRD1A: *idx3 = *idx1; FN=0 init=0 WS=1 RS=1 */ -.long 0xc318839b /* 0068: LCDEXT: idx1 = var6; idx1 == var14; idx1 += inc3 */ -.long 0x80190000 /* 006C: LCD: idx2 = var0; idx2 once var0; idx2 += inc0 */ -.long 0x04008468 /* 0070: DRD1A: idx1 = var13; FN=0 INT init=0 WS=0 RS=0 */ -.long 0xc4038358 /* 0074: LCDEXT: idx1 = var8, idx2 = var7; idx1 == var13; idx1 += inc3, idx2 += inc0 */ -.long 0x81c50000 /* 0078: LCD: idx3 = var3 + var10; idx3 once var0; idx3 += inc0 */ -.long 0x1000cb18 /* 007C: DRD1A: *idx2 = idx3; FN=0 MORE init=0 WS=0 RS=0 */ -.long 0x00000f18 /* 0080: DRD1A: var3 = idx3; FN=0 init=0 WS=0 RS=0 */ -.long 0xc4188364 /* 0084: LCDEXT: idx1 = var8; idx1 > var13; idx1 += inc4 */ -.long 0x83990000 /* 0088: LCD: idx2 = var7; idx2 once var0; idx2 += inc0 */ -.long 0x10000c00 /* 008C: DRD1A: var3 = var0; FN=0 MORE init=0 WS=0 RS=0 */ -.long 0x0000c800 /* 0090: DRD1A: *idx2 = var0; FN=0 init=0 WS=0 RS=0 */ -.long 0x81988000 /* 0094: LCD: idx1 = var3; idx1 once var0; idx1 += inc0 */ -.long 0x10000788 /* 0098: DRD1A: var1 = *idx1; FN=0 MORE init=0 WS=0 RS=0 */ -.long 0x60000000 /* 009C: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */ -.long 0x080cf04c /* 00A0: DRD2B1: idx0 = EU3(); EU3(var1,var12) */ -.long 0x000001f8 /* 00A4(:0): NOP */ - - -.globl scEthernetXmit_TDT -scEthernetXmit_TDT: /* Task 1 Descriptor Table */ -.long 0x80024800 /* 0000: LCDEXT: idx0 = 0xf0008800; ; */ -.long 0x85c60004 /* 0004: LCD: idx1 = var11 + var12 + 4; idx1 once var0; idx1 += inc0 */ -.long 0x10002308 /* 0008: DRD1A: var8 = idx1; FN=0 MORE init=0 WS=0 RS=0 */ -.long 0x10000f88 /* 000C: DRD1A: var3 = *idx1; FN=0 MORE init=0 WS=0 RS=0 */ -.long 0x00000380 /* 0010: DRD1A: var0 = *idx0; FN=0 init=0 WS=0 RS=0 */ -.long 0x81980000 /* 0014: LCD: idx0 = var3; idx0 once var0; idx0 += inc0 */ -.long 0x10000780 /* 0018: DRD1A: var1 = *idx0; FN=0 MORE init=0 WS=0 RS=0 */ -.long 0x60000000 /* 001C: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */ -.long 0x024cf04d /* 0020: DRD2B1: var9 = EU3(); EU3(var1,var13) */ -.long 0x84980309 /* 0024: LCD: idx0 = var9; idx0 != var12; idx0 += inc1 */ -.long 0xc0004003 /* 0028: LCDEXT: idx1 = 0x00000003; ; */ -.long 0x81c60004 /* 002C: LCD: idx2 = var3 + var12 + 4; idx2 once var0; idx2 += inc0 */ -.long 0x70000000 /* 0030: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */ -.long 0x010cf04e /* 0034: DRD2B1: var4 = EU3(); EU3(var1,var14) */ -.long 0x70000000 /* 0038: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */ -.long 0x014cf04f /* 003C: DRD2B1: var5 = EU3(); EU3(var1,var15) */ -.long 0x70000000 /* 0040: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */ -.long 0x028cf050 /* 0044: DRD2B1: var10 = EU3(); EU3(var1,var16) */ -.long 0x70000000 /* 0048: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT MORE init=0 WS=0 RS=0 */ -.long 0x018cf051 /* 004C: DRD2B1: var6 = EU3(); EU3(var1,var17) */ -.long 0x10000b90 /* 0050: DRD1A: var2 = *idx2; FN=0 MORE init=0 WS=0 RS=0 */ -.long 0x60000000 /* 0054: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */ -.long 0x01ccf0a1 /* 0058: DRD2B1: var7 = EU3(); EU3(var2,idx1) */ -.long 0xc2988312 /* 005C: LCDEXT: idx1 = var5; idx1 > var12; idx1 += inc2 */ -.long 0x83490000 /* 0060: LCD: idx2 = var6 + var18; idx2 once var0; idx2 += inc0 */ -.long 0x00001b10 /* 0064: DRD1A: var6 = idx2; FN=0 init=0 WS=0 RS=0 */ -.long 0x8000d1a4 /* 0068: LCDEXT: idx1 = 0xf00031a4; ; */ -.long 0x8301031c /* 006C: LCD: idx2 = var6, idx3 = var2; idx2 > var12; idx2 += inc3, idx3 += inc4 */ -.long 0x008ac798 /* 0070: DRD1A: *idx1 = *idx3; FN=0 init=4 WS=1 RS=1 */ -.long 0x8000d1a4 /* 0074: LCDEXT: idx1 = 0xf00031a4; ; */ -.long 0xc1430000 /* 0078: LCDEXT: idx2 = var2 + var6; idx2 once var0; idx2 += inc0 */ -.long 0x82998312 /* 007C: LCD: idx3 = var5; idx3 > var12; idx3 += inc2 */ -.long 0x088ac790 /* 0080: DRD1A: *idx1 = *idx2; FN=0 TFD init=4 WS=1 RS=1 */ -.long 0x81988000 /* 0084: LCD: idx1 = var3; idx1 once var0; idx1 += inc0 */ -.long 0x60000001 /* 0088: DRD2A: EU0=0 EU1=0 EU2=0 EU3=1 EXT init=0 WS=0 RS=0 */ -.long 0x0c4cfc4d /* 008C: DRD2B1: *idx1 = EU3(); EU3(*idx1,var13) */ -.long 0xc21883ad /* 0090: LCDEXT: idx1 = var4; idx1 == var14; idx1 += inc5 */ -.long 0x80190000 /* 0094: LCD: idx2 = var0; idx2 once var0; idx2 += inc0 */ -.long 0x04008460 /* 0098: DRD1A: idx1 = var12; FN=0 INT init=0 WS=0 RS=0 */ -.long 0xc4052305 /* 009C: LCDEXT: idx1 = var8, idx2 = var10; idx2 == var12; idx1 += inc0, idx2 += inc5 */ -.long 0x81c98000 /* 00A0: LCD: idx3 = var3 + var19; idx3 once var0; idx3 += inc0 */ -.long 0x1000c718 /* 00A4: DRD1A: *idx1 = idx3; FN=0 MORE init=0 WS=0 RS=0 */ -.long 0x00000f18 /* 00A8: DRD1A: var3 = idx3; FN=0 init=0 WS=0 RS=0 */ -.long 0xc4188000 /* 00AC: LCDEXT: idx1 = var8; idx1 once var0; idx1 += inc0 */ -.long 0x85190312 /* 00B0: LCD: idx2 = var10; idx2 > var12; idx2 += inc2 */ -.long 0x10000c00 /* 00B4: DRD1A: var3 = var0; FN=0 MORE init=0 WS=0 RS=0 */ -.long 0x1000c400 /* 00B8: DRD1A: *idx1 = var0; FN=0 MORE init=0 WS=0 RS=0 */ -.long 0x00008860 /* 00BC: DRD1A: idx2 = var12; FN=0 init=0 WS=0 RS=0 */ -.long 0x81988000 /* 00C0: LCD: idx1 = var3; idx1 once var0; idx1 += inc0 */ -.long 0x10000788 /* 00C4: DRD1A: var1 = *idx1; FN=0 MORE init=0 WS=0 RS=0 */ -.long 0x60000000 /* 00C8: DRD2A: EU0=0 EU1=0 EU2=0 EU3=0 EXT init=0 WS=0 RS=0 */ -.long 0x080cf04d /* 00CC: DRD2B1: idx0 = EU3(); EU3(var1,var13) */ -.long 0x000001f8 /* 00D0(:0): NOP */ - -.align 8 - -.globl scEthernetRecv_VarTab -scEthernetRecv_VarTab: /* Task 0 Variable Table */ -.long 0x00000000 /* var[0] */ -.long 0x00000000 /* var[1] */ -.long 0x00000000 /* var[2] */ -.long 0x00000000 /* var[3] */ -.long 0x00000000 /* var[4] */ -.long 0x00000000 /* var[5] */ -.long 0x00000000 /* var[6] */ -.long 0x00000000 /* var[7] */ -.long 0x00000000 /* var[8] */ -.long (CONFIG_SYS_MBAR + 0x8800) /* var[9] */ -.long 0x00000008 /* var[10] */ -.long 0x0000000c /* var[11] */ -.long 0x80000000 /* var[12] */ -.long 0x00000000 /* var[13] */ -.long 0x10000000 /* var[14] */ -.long 0x20000000 /* var[15] */ -.long 0x000005e4 /* var[16] */ -.long 0x0000000e /* var[17] */ -.long 0x000005e0 /* var[18] */ -.long 0x00000004 /* var[19] */ -.long 0x00000000 /* var[20] */ -.long 0x00000000 /* var[21] */ -.long 0x00000000 /* var[22] */ -.long 0x00000000 /* var[23] */ -.long 0x00000000 /* inc[0] */ -.long 0x60000000 /* inc[1] */ -.long 0x20000001 /* inc[2] */ -.long 0x80000000 /* inc[3] */ -.long 0x40000000 /* inc[4] */ -.long 0x00000000 /* inc[5] */ -.long 0x00000000 /* inc[6] */ -.long 0x00000000 /* inc[7] */ - -.align 8 - -.globl scEthernetXmit_VarTab -scEthernetXmit_VarTab: /* Task 1 Variable Table */ -.long 0x00000000 /* var[0] */ -.long 0x00000000 /* var[1] */ -.long 0x00000000 /* var[2] */ -.long 0x00000000 /* var[3] */ -.long 0x00000000 /* var[4] */ -.long 0x00000000 /* var[5] */ -.long 0x00000000 /* var[6] */ -.long 0x00000000 /* var[7] */ -.long 0x00000000 /* var[8] */ -.long 0x00000000 /* var[9] */ -.long 0x00000000 /* var[10] */ -.long (CONFIG_SYS_MBAR + 0x8800) /* var[11] */ -.long 0x00000000 /* var[12] */ -.long 0x80000000 /* var[13] */ -.long 0x10000000 /* var[14] */ -.long 0x08000000 /* var[15] */ -.long 0x20000000 /* var[16] */ -.long 0x0000ffff /* var[17] */ -.long 0xffffffff /* var[18] */ -.long 0x00000008 /* var[19] */ -.long 0x00000000 /* var[20] */ -.long 0x00000000 /* var[21] */ -.long 0x00000000 /* var[22] */ -.long 0x00000000 /* var[23] */ -.long 0x00000000 /* inc[0] */ -.long 0x60000000 /* inc[1] */ -.long 0x40000000 /* inc[2] */ -.long 0x4000ffff /* inc[3] */ -.long 0xe0000001 /* inc[4] */ -.long 0x80000000 /* inc[5] */ -.long 0x00000000 /* inc[6] */ -.long 0x00000000 /* inc[7] */ - -.align 8 - -.globl scEthernetRecv_FDT -scEthernetRecv_FDT: /* Task 0 Function Descriptor Table */ -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x21800000 /* and(), EU# 3 */ -.long 0x21400000 /* andn(), EU# 3 */ -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 - -.align 8 - -.globl scEthernetXmit_FDT -scEthernetXmit_FDT: /* Task 1 Function Descriptor Table */ -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x21800000 /* and(), EU# 3 */ -.long 0x21400000 /* andn(), EU# 3 */ -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 -.long 0x00000000 - - -.globl scEthernetRecv_CSave -scEthernetRecv_CSave: /* Task 0 context save space */ -.space 128, 0x0 - - -.globl scEthernetXmit_CSave -scEthernetXmit_CSave: /* Task 1 context save space */ -.space 128, 0x0 diff --git a/arch/powerpc/cpu/mpc5xxx/ide.c b/arch/powerpc/cpu/mpc5xxx/ide.c deleted file mode 100644 index d1f4349184..0000000000 --- a/arch/powerpc/cpu/mpc5xxx/ide.c +++ /dev/null @@ -1,75 +0,0 @@ -/* - * (C) Copyright 2004 - * Pierre AUBERT, Staubli Faverges, p.aubert@staubli.com - * - * SPDX-License-Identifier: GPL-2.0+ - * - * Init is derived from Linux code. - */ -#include <common.h> - -#if defined(CONFIG_IDE) -#include <mpc5xxx.h> - -DECLARE_GLOBAL_DATA_PTR; - -#define CALC_TIMING(t) (t + period - 1) / period - -#ifdef CONFIG_IDE_RESET -extern void init_ide_reset (void); -#endif - -int ide_preinit (void) -{ - long period, t0, t1, t2_8, t2_16, t4, ta; - vu_long reg; - struct mpc5xxx_sdma *psdma = (struct mpc5xxx_sdma *) MPC5XXX_SDMA; - - reg = *(vu_long *) MPC5XXX_GPS_PORT_CONFIG; -#if defined(CONFIG_SYS_ATA_CS_ON_I2C2) - /* ATA cs0/1 on i2c2 clk/io */ - reg = (reg & ~0x03000000ul) | 0x02000000ul; -#elif defined(CONFIG_SYS_ATA_CS_ON_TIMER01) - /* ATA cs0/1 on Timer 0/1 */ - reg = (reg & ~0x03000000ul) | 0x03000000ul; -#else - /* ATA cs0/1 on Local Plus cs4/5 */ - reg = (reg & ~0x03000000ul) | 0x01000000ul; -#endif /* CONFIG_TOTAL5200 */ - *(vu_long *) MPC5XXX_GPS_PORT_CONFIG = reg; - - /* All sample codes do that... */ - *(vu_long *) MPC5XXX_ATA_SHARE_COUNT = 0; - - /* Configure and reset host */ - *(vu_long *) MPC5XXX_ATA_HOST_CONFIG = MPC5xxx_ATA_HOSTCONF_IORDY | - MPC5xxx_ATA_HOSTCONF_SMR | MPC5xxx_ATA_HOSTCONF_FR; - udelay (10); - *(vu_long *) MPC5XXX_ATA_HOST_CONFIG = MPC5xxx_ATA_HOSTCONF_IORDY; - - /* Disable prefetch on Commbus */ - psdma->PtdCntrl |= 1; - - /* Init timings : we use PIO mode 0 timings */ - period = 1000000000 / gd->arch.ipb_clk; /* period in ns */ - - t0 = CALC_TIMING (600); - t2_8 = CALC_TIMING (290); - t2_16 = CALC_TIMING (165); - reg = (t0 << 24) | (t2_8 << 16) | (t2_16 << 8); - *(vu_long *) MPC5XXX_ATA_PIO1 = reg; - - t4 = CALC_TIMING (30); - t1 = CALC_TIMING (70); - ta = CALC_TIMING (35); - reg = (t4 << 24) | (t1 << 16) | (ta << 8); - - *(vu_long *) MPC5XXX_ATA_PIO2 = reg; - -#ifdef CONFIG_IDE_RESET - init_ide_reset (); -#endif /* CONFIG_IDE_RESET */ - - return (0); -} -#endif diff --git a/arch/powerpc/cpu/mpc5xxx/interrupts.c b/arch/powerpc/cpu/mpc5xxx/interrupts.c deleted file mode 100644 index 9121fa0cd0..0000000000 --- a/arch/powerpc/cpu/mpc5xxx/interrupts.c +++ /dev/null @@ -1,330 +0,0 @@ -/* - * (C) Copyright 2006 - * Detlev Zundel, DENX Software Engineering, dzu@denx.de - * - * (C) Copyright -2003 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * (C) Copyright 2001 - * Josh Huber huber@mclx.com, Mission Critical Linux, Inc. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* this section was ripped out of arch/powerpc/syslib/mpc52xx_pic.c in the - * Linux 2.6 source with the following copyright. - * - * Based on (well, mostly copied from) the code from the 2.4 kernel by - * Dale Farnsworth dfarnsworth@mvista.com and Kent Borg. - * - * Copyright (C) 2004 Sylvain Munaut tnt@246tNt.com - * Copyright (C) 2003 Montavista Software, Inc - */ - -#include <common.h> -#include <asm/processor.h> -#include <asm/io.h> -#include <command.h> - -struct irq_action { - interrupt_handler_t *handler; - void *arg; - ulong count; -}; - -static struct irq_action irq_handlers[NR_IRQS]; - -static struct mpc5xxx_intr *intr; -static struct mpc5xxx_sdma *sdma; - -static void mpc5xxx_ic_disable(unsigned int irq) -{ - u32 val; - - if (irq == MPC5XXX_IRQ0) { - val = in_be32(&intr->ctrl); - val &= ~(1 << 11); - out_be32(&intr->ctrl, val); - } else if (irq < MPC5XXX_IRQ1) { - BUG(); - } else if (irq <= MPC5XXX_IRQ3) { - val = in_be32(&intr->ctrl); - val &= ~(1 << (10 - (irq - MPC5XXX_IRQ1))); - out_be32(&intr->ctrl, val); - } else if (irq < MPC5XXX_SDMA_IRQ_BASE) { - val = in_be32(&intr->main_mask); - val |= 1 << (16 - (irq - MPC5XXX_MAIN_IRQ_BASE)); - out_be32(&intr->main_mask, val); - } else if (irq < MPC5XXX_PERP_IRQ_BASE) { - val = in_be32(&sdma->IntMask); - val |= 1 << (irq - MPC5XXX_SDMA_IRQ_BASE); - out_be32(&sdma->IntMask, val); - } else { - val = in_be32(&intr->per_mask); - val |= 1 << (31 - (irq - MPC5XXX_PERP_IRQ_BASE)); - out_be32(&intr->per_mask, val); - } -} - -static void mpc5xxx_ic_enable(unsigned int irq) -{ - u32 val; - - if (irq == MPC5XXX_IRQ0) { - val = in_be32(&intr->ctrl); - val |= 1 << 11; - out_be32(&intr->ctrl, val); - } else if (irq < MPC5XXX_IRQ1) { - BUG(); - } else if (irq <= MPC5XXX_IRQ3) { - val = in_be32(&intr->ctrl); - val |= 1 << (10 - (irq - MPC5XXX_IRQ1)); - out_be32(&intr->ctrl, val); - } else if (irq < MPC5XXX_SDMA_IRQ_BASE) { - val = in_be32(&intr->main_mask); - val &= ~(1 << (16 - (irq - MPC5XXX_MAIN_IRQ_BASE))); - out_be32(&intr->main_mask, val); - } else if (irq < MPC5XXX_PERP_IRQ_BASE) { - val = in_be32(&sdma->IntMask); - val &= ~(1 << (irq - MPC5XXX_SDMA_IRQ_BASE)); - out_be32(&sdma->IntMask, val); - } else { - val = in_be32(&intr->per_mask); - val &= ~(1 << (31 - (irq - MPC5XXX_PERP_IRQ_BASE))); - out_be32(&intr->per_mask, val); - } -} - -static void mpc5xxx_ic_ack(unsigned int irq) -{ - u32 val; - - /* - * Only some irqs are reset here, others in interrupting hardware. - */ - - switch (irq) { - case MPC5XXX_IRQ0: - val = in_be32(&intr->ctrl); - val |= 0x08000000; - out_be32(&intr->ctrl, val); - break; - case MPC5XXX_CCS_IRQ: - val = in_be32(&intr->enc_status); - val |= 0x00000400; - out_be32(&intr->enc_status, val); - break; - case MPC5XXX_IRQ1: - val = in_be32(&intr->ctrl); - val |= 0x04000000; - out_be32(&intr->ctrl, val); - break; - case MPC5XXX_IRQ2: - val = in_be32(&intr->ctrl); - val |= 0x02000000; - out_be32(&intr->ctrl, val); - break; - case MPC5XXX_IRQ3: - val = in_be32(&intr->ctrl); - val |= 0x01000000; - out_be32(&intr->ctrl, val); - break; - default: - if (irq >= MPC5XXX_SDMA_IRQ_BASE - && irq < (MPC5XXX_SDMA_IRQ_BASE + MPC5XXX_SDMA_IRQ_NUM)) { - out_be32(&sdma->IntPend, - 1 << (irq - MPC5XXX_SDMA_IRQ_BASE)); - } - break; - } -} - -static void mpc5xxx_ic_disable_and_ack(unsigned int irq) -{ - mpc5xxx_ic_disable(irq); - mpc5xxx_ic_ack(irq); -} - -static void mpc5xxx_ic_end(unsigned int irq) -{ - mpc5xxx_ic_enable(irq); -} - -void mpc5xxx_init_irq(void) -{ - u32 intr_ctrl; - - /* Remap the necessary zones */ - intr = (struct mpc5xxx_intr *)(MPC5XXX_ICTL); - sdma = (struct mpc5xxx_sdma *)(MPC5XXX_SDMA); - - /* Disable all interrupt sources. */ - out_be32(&sdma->IntPend, 0xffffffff); /* 1 means clear pending */ - out_be32(&sdma->IntMask, 0xffffffff); /* 1 means disabled */ - out_be32(&intr->per_mask, 0x7ffffc00); /* 1 means disabled */ - out_be32(&intr->main_mask, 0x00010fff); /* 1 means disabled */ - intr_ctrl = in_be32(&intr->ctrl); - intr_ctrl |= 0x0f000000 | /* clear IRQ 0-3 */ - 0x00ff0000 | /* IRQ 0-3 level sensitive low active */ - 0x00001000 | /* MEE master external enable */ - 0x00000000 | /* 0 means disable IRQ 0-3 */ - 0x00000001; /* CEb route critical normally */ - out_be32(&intr->ctrl, intr_ctrl); - - /* Zero a bunch of the priority settings. */ - out_be32(&intr->per_pri1, 0); - out_be32(&intr->per_pri2, 0); - out_be32(&intr->per_pri3, 0); - out_be32(&intr->main_pri1, 0); - out_be32(&intr->main_pri2, 0); -} - -int mpc5xxx_get_irq(struct pt_regs *regs) -{ - u32 status; - int irq = -1; - - status = in_be32(&intr->enc_status); - - if (status & 0x00000400) { /* critical */ - irq = (status >> 8) & 0x3; - if (irq == 2) /* high priority peripheral */ - goto peripheral; - irq += MPC5XXX_CRIT_IRQ_BASE; - } else if (status & 0x00200000) { /* main */ - irq = (status >> 16) & 0x1f; - if (irq == 4) /* low priority peripheral */ - goto peripheral; - irq += MPC5XXX_MAIN_IRQ_BASE; - } else if (status & 0x20000000) { /* peripheral */ - peripheral: - irq = (status >> 24) & 0x1f; - if (irq == 0) { /* bestcomm */ - status = in_be32(&sdma->IntPend); - irq = ffs(status) + MPC5XXX_SDMA_IRQ_BASE - 1; - } else - irq += MPC5XXX_PERP_IRQ_BASE; - } - - return irq; -} - -/****************************************************************************/ - -int interrupt_init_cpu(ulong * decrementer_count) -{ - *decrementer_count = get_tbclk() / CONFIG_SYS_HZ; - - mpc5xxx_init_irq(); - - return (0); -} - -/****************************************************************************/ - -/* - * Handle external interrupts - */ -void external_interrupt(struct pt_regs *regs) -{ - int irq, unmask = 1; - - irq = mpc5xxx_get_irq(regs); - - mpc5xxx_ic_disable_and_ack(irq); - - enable_interrupts(); - - if (irq_handlers[irq].handler != NULL) - (*irq_handlers[irq].handler) (irq_handlers[irq].arg); - else { - printf("\nBogus External Interrupt IRQ %d\n", irq); - /* - * turn off the bogus interrupt, otherwise it - * might repeat forever - */ - unmask = 0; - } - - if (unmask) - mpc5xxx_ic_end(irq); -} - -void timer_interrupt_cpu(struct pt_regs *regs) -{ - /* nothing to do here */ - return; -} - -/****************************************************************************/ - -/* - * Install and free a interrupt handler. - */ - -void irq_install_handler(int irq, interrupt_handler_t * handler, void *arg) -{ - if (irq < 0 || irq >= NR_IRQS) { - printf("irq_install_handler: bad irq number %d\n", irq); - return; - } - - if (irq_handlers[irq].handler != NULL) - printf("irq_install_handler: 0x%08lx replacing 0x%08lx\n", - (ulong) handler, (ulong) irq_handlers[irq].handler); - - irq_handlers[irq].handler = handler; - irq_handlers[irq].arg = arg; - - mpc5xxx_ic_enable(irq); -} - -void irq_free_handler(int irq) -{ - if (irq < 0 || irq >= NR_IRQS) { - printf("irq_free_handler: bad irq number %d\n", irq); - return; - } - - mpc5xxx_ic_disable(irq); - - irq_handlers[irq].handler = NULL; - irq_handlers[irq].arg = NULL; -} - -/****************************************************************************/ - -#if defined(CONFIG_CMD_IRQ) -void do_irqinfo(cmd_tbl_t * cmdtp, bd_t * bd, int flag, int argc, char * const argv[]) -{ - int irq, re_enable; - u32 intr_ctrl; - char *irq_config[] = { "level sensitive, active high", - "edge sensitive, rising active edge", - "edge sensitive, falling active edge", - "level sensitive, active low" - }; - - re_enable = disable_interrupts(); - - intr_ctrl = in_be32(&intr->ctrl); - printf("Interrupt configuration:\n"); - - for (irq = 0; irq <= 3; irq++) { - printf("IRQ%d: %s\n", irq, - irq_config[(intr_ctrl >> (22 - 2 * irq)) & 0x3]); - } - - puts("\nInterrupt-Information:\n" "Nr Routine Arg Count\n"); - - for (irq = 0; irq < NR_IRQS; irq++) - if (irq_handlers[irq].handler != NULL) - printf("%02d %08lx %08lx %ld\n", irq, - (ulong) irq_handlers[irq].handler, - (ulong) irq_handlers[irq].arg, - irq_handlers[irq].count); - - if (re_enable) - enable_interrupts(); -} -#endif diff --git a/arch/powerpc/cpu/mpc5xxx/io.S b/arch/powerpc/cpu/mpc5xxx/io.S deleted file mode 100644 index 32641ed67f..0000000000 --- a/arch/powerpc/cpu/mpc5xxx/io.S +++ /dev/null @@ -1,112 +0,0 @@ -/* - * Copyright (C) 1998 Dan Malek dmalek@jlc.net - * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se> - * Copyright (C) 2001 Sysgo Real-Time Solutions, GmbH <www.elinos.com> - * Andreas Heppel aheppel@sysgo.de - * Copyright (C) 2003 Wolfgang Denk wd@denx.de - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <config.h> -#include <ppc_asm.tmpl> - -/* ------------------------------------------------------------------------------- */ -/* Function: in8 */ -/* Description: Input 8 bits */ -/* ------------------------------------------------------------------------------- */ - .globl in8 -in8: - lbz r3,0(r3) - sync - blr - -/* ------------------------------------------------------------------------------- */ -/* Function: in16 */ -/* Description: Input 16 bits */ -/* ------------------------------------------------------------------------------- */ - .globl in16 -in16: - lhz r3,0(r3) - sync - blr - -/* ------------------------------------------------------------------------------- */ -/* Function: in16r */ -/* Description: Input 16 bits and byte reverse */ -/* ------------------------------------------------------------------------------- */ - .globl in16r -in16r: - lhbrx r3,0,r3 - sync - blr - -/* ------------------------------------------------------------------------------- */ -/* Function: in32 */ -/* Description: Input 32 bits */ -/* ------------------------------------------------------------------------------- */ - .globl in32 -in32: - lwz 3,0(3) - sync - blr - -/* ------------------------------------------------------------------------------- */ -/* Function: in32r */ -/* Description: Input 32 bits and byte reverse */ -/* ------------------------------------------------------------------------------- */ - .globl in32r -in32r: - lwbrx r3,0,r3 - sync - blr - -/* ------------------------------------------------------------------------------- */ -/* Function: out8 */ -/* Description: Output 8 bits */ -/* ------------------------------------------------------------------------------- */ - .globl out8 -out8: - stb r4,0(r3) - sync - blr - -/* ------------------------------------------------------------------------------- */ -/* Function: out16 */ -/* Description: Output 16 bits */ -/* ------------------------------------------------------------------------------- */ - .globl out16 -out16: - sth r4,0(r3) - sync - blr - -/* ------------------------------------------------------------------------------- */ -/* Function: out16r */ -/* Description: Byte reverse and output 16 bits */ -/* ------------------------------------------------------------------------------- */ - .globl out16r -out16r: - sthbrx r4,0,r3 - sync - blr - -/* ------------------------------------------------------------------------------- */ -/* Function: out32 */ -/* Description: Output 32 bits */ -/* ------------------------------------------------------------------------------- */ - .globl out32 -out32: - stw r4,0(r3) - sync - blr - -/* ------------------------------------------------------------------------------- */ -/* Function: out32r */ -/* Description: Byte reverse and output 32 bits */ -/* ------------------------------------------------------------------------------- */ - .globl out32r -out32r: - stwbrx r4,0,r3 - sync - blr diff --git a/arch/powerpc/cpu/mpc5xxx/loadtask.c b/arch/powerpc/cpu/mpc5xxx/loadtask.c deleted file mode 100644 index 47e7b596a6..0000000000 --- a/arch/powerpc/cpu/mpc5xxx/loadtask.c +++ /dev/null @@ -1,76 +0,0 @@ -/* - * (C) Copyright 2003 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * This file is based on code - * (C) Copyright Motorola, Inc., 2000 - */ - -#include <common.h> -#include <mpc5xxx.h> - -/* BestComm/SmartComm microcode */ -extern int taskTable; - -void loadtask(int basetask, int tasks) -{ - int *sram = (int *)MPC5XXX_SRAM; - int *task_org = &taskTable; - unsigned int start, offset, end; - int i; - -#ifdef DEBUG - printf("basetask = %d, tasks = %d\n", basetask, tasks); - printf("task_org = 0x%08x\n", (unsigned int)task_org); -#endif - - /* setup TaskBAR register */ - *(vu_long *)MPC5XXX_SDMA = MPC5XXX_SRAM; - - /* relocate task table entries */ - offset = (unsigned int)sram; - for (i = basetask; i < basetask + tasks; i++) { - sram[i * 8 + 0] = task_org[i * 8 + 0] + offset; - sram[i * 8 + 1] = task_org[i * 8 + 1] + offset; - sram[i * 8 + 2] = task_org[i * 8 + 2] + offset; - sram[i * 8 + 3] = task_org[i * 8 + 3] + offset; - sram[i * 8 + 4] = task_org[i * 8 + 4]; - sram[i * 8 + 5] = task_org[i * 8 + 5]; - sram[i * 8 + 6] = task_org[i * 8 + 6] + offset; - sram[i * 8 + 7] = task_org[i * 8 + 7]; - } - - /* relocate task descriptors */ - start = (sram[basetask * 8] - (unsigned int)sram); - end = (sram[(basetask + tasks - 1) * 8 + 1] - (unsigned int)sram); - -#ifdef DEBUG - printf ("TDT start = 0x%08x, end = 0x%08x\n", start, end); -#endif - - start /= 4; - end /= 4; - for (i = start; i <= end; i++) { - sram[i] = task_org[i]; - } - - /* relocate variables */ - start = (sram[basetask * 8 + 2] - (unsigned int)sram); - end = (sram[(basetask + tasks - 1) * 8 + 2] + 256 - (unsigned int)sram); - start /= 4; - end /= 4; - for (i = start; i < end; i++) { - sram[i] = task_org[i]; - } - - /* relocate function decriptors */ - start = ((sram[basetask * 8 + 3] & 0xfffffffc) - (unsigned int)sram); - end = ((sram[(basetask + tasks - 1) * 8 + 3] & 0xfffffffc) + 256 - (unsigned int)sram); - start /= 4; - end /= 4; - for (i = start; i < end; i++) { - sram[i] = task_org[i]; - } - - asm volatile ("sync"); -} diff --git a/arch/powerpc/cpu/mpc5xxx/pci_mpc5200.c b/arch/powerpc/cpu/mpc5xxx/pci_mpc5200.c deleted file mode 100644 index 70b7e6e6cb..0000000000 --- a/arch/powerpc/cpu/mpc5xxx/pci_mpc5200.c +++ /dev/null @@ -1,157 +0,0 @@ -/* - * (C) Copyright 2000-2003 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> - -#if defined(CONFIG_PCI) - -#include <asm/processor.h> -#include <asm/io.h> -#include <pci.h> -#include <mpc5xxx.h> - -/* System RAM mapped over PCI */ -#define CONFIG_PCI_MEMORY_BUS CONFIG_SYS_SDRAM_BASE -#define CONFIG_PCI_MEMORY_PHYS CONFIG_SYS_SDRAM_BASE -#define CONFIG_PCI_MEMORY_SIZE (1024 * 1024 * 1024) - -/* PCIIWCR bit fields */ -#define IWCR_MEM (0 << 3) -#define IWCR_IO (1 << 3) -#define IWCR_READ (0 << 1) -#define IWCR_READLINE (1 << 1) -#define IWCR_READMULT (2 << 1) -#define IWCR_EN (1 << 0) - -static int mpc5200_read_config_dword(struct pci_controller *hose, - pci_dev_t dev, int offset, u32* value) -{ - *(volatile u32 *)MPC5XXX_PCI_CAR = (1 << 31) | dev | offset; - eieio(); - udelay(10); - *value = in_le32((volatile u32 *)CONFIG_PCI_IO_PHYS); - eieio(); - *(volatile u32 *)MPC5XXX_PCI_CAR = 0; - udelay(10); - return 0; -} - -static int mpc5200_write_config_dword(struct pci_controller *hose, - pci_dev_t dev, int offset, u32 value) -{ - *(volatile u32 *)MPC5XXX_PCI_CAR = (1 << 31) | dev | offset; - eieio(); - udelay(10); - out_le32((volatile u32 *)CONFIG_PCI_IO_PHYS, value); - eieio(); - *(volatile u32 *)MPC5XXX_PCI_CAR = 0; - udelay(10); - return 0; -} - -void pci_mpc5xxx_init (struct pci_controller *hose) -{ - hose->first_busno = 0; - hose->last_busno = 0xff; - - /* System space */ - pci_set_region(hose->regions + 0, - CONFIG_PCI_MEMORY_BUS, - CONFIG_PCI_MEMORY_PHYS, - CONFIG_PCI_MEMORY_SIZE, - PCI_REGION_MEM | PCI_REGION_SYS_MEMORY); - - /* PCI memory space */ - pci_set_region(hose->regions + 1, - CONFIG_PCI_MEM_BUS, - CONFIG_PCI_MEM_PHYS, - CONFIG_PCI_MEM_SIZE, - PCI_REGION_MEM); - - /* PCI IO space */ - pci_set_region(hose->regions + 2, - CONFIG_PCI_IO_BUS, - CONFIG_PCI_IO_PHYS, - CONFIG_PCI_IO_SIZE, - PCI_REGION_IO); - - hose->region_count = 3; - - pci_register_hose(hose); - - /* GPIO Multiplexing - enable PCI */ - *(vu_long *)MPC5XXX_GPS_PORT_CONFIG &= ~(1 << 15); - - /* Set host bridge as pci master and enable memory decoding */ - *(vu_long *)MPC5XXX_PCI_CMD |= - PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY; - - /* Set maximum latency timer */ - *(vu_long *)MPC5XXX_PCI_CFG |= (0xf800); - - /* Set cache line size */ - *(vu_long *)MPC5XXX_PCI_CFG = (*(vu_long *)MPC5XXX_PCI_CFG & ~0xff) | - (CONFIG_SYS_CACHELINE_SIZE / 4); - - /* Map MBAR to PCI space */ - *(vu_long *)MPC5XXX_PCI_BAR0 = CONFIG_SYS_MBAR; - *(vu_long *)MPC5XXX_PCI_TBATR0 = CONFIG_SYS_MBAR | 1; - - /* Map RAM to PCI space */ - *(vu_long *)MPC5XXX_PCI_BAR1 = CONFIG_PCI_MEMORY_BUS | (1 << 3); - *(vu_long *)MPC5XXX_PCI_TBATR1 = CONFIG_PCI_MEMORY_PHYS | 1; - - /* Park XLB on PCI */ - *(vu_long *)(MPC5XXX_XLBARB + 0x40) &= ~((7 << 8) | (3 << 5)); - *(vu_long *)(MPC5XXX_XLBARB + 0x40) |= (3 << 8) | (3 << 5); - - /* Disable interrupts from PCI controller */ - *(vu_long *)MPC5XXX_PCI_GSCR &= ~(7 << 12); - *(vu_long *)MPC5XXX_PCI_ICR &= ~(7 << 24); - - /* Set PCI retry counter to 0 = infinite retry. */ - /* The default of 255 is too short for slow devices. */ - *(vu_long *)MPC5XXX_PCI_ICR &= 0xFFFFFF00; - - /* Disable initiator windows */ - *(vu_long *)MPC5XXX_PCI_IWCR = 0; - - /* Map PCI memory to physical space */ - *(vu_long *)MPC5XXX_PCI_IW0BTAR = CONFIG_PCI_MEM_PHYS | - (((CONFIG_PCI_MEM_SIZE - 1) >> 8) & 0x00ff0000) | - (CONFIG_PCI_MEM_BUS >> 16); - *(vu_long *)MPC5XXX_PCI_IWCR |= (IWCR_MEM | IWCR_READ | IWCR_EN) << 24; - - /* Map PCI I/O to physical space */ - *(vu_long *)MPC5XXX_PCI_IW1BTAR = CONFIG_PCI_IO_PHYS | - (((CONFIG_PCI_IO_SIZE - 1) >> 8) & 0x00ff0000) | - (CONFIG_PCI_IO_BUS >> 16); - *(vu_long *)MPC5XXX_PCI_IWCR |= (IWCR_IO | IWCR_READ | IWCR_EN) << 16; - - /* Reset the PCI bus */ - *(vu_long *)MPC5XXX_PCI_GSCR |= 1; - udelay(1000); - *(vu_long *)MPC5XXX_PCI_GSCR &= ~1; - udelay(1000); - - pci_set_ops(hose, - pci_hose_read_config_byte_via_dword, - pci_hose_read_config_word_via_dword, - mpc5200_read_config_dword, - pci_hose_write_config_byte_via_dword, - pci_hose_write_config_word_via_dword, - mpc5200_write_config_dword); - - udelay(1000); - -#ifdef CONFIG_PCI_SCAN_SHOW - printf("PCI: Bus Dev VenId DevId Class Int\n"); -#endif - - hose->last_busno = pci_hose_scan(hose); -} -#endif /* CONFIG_PCI */ diff --git a/arch/powerpc/cpu/mpc5xxx/serial.c b/arch/powerpc/cpu/mpc5xxx/serial.c deleted file mode 100644 index bccdcf7973..0000000000 --- a/arch/powerpc/cpu/mpc5xxx/serial.c +++ /dev/null @@ -1,265 +0,0 @@ -/* - * (C) Copyright 2000 - 2003 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - * - * Hacked for MPC8260 by Murray.Jensen@cmst.csiro.au, 19-Oct-00, with - * changes based on the file arch/powerpc/mbxboot/m8260_tty.c from the - * Linux/PPC sources (m8260_tty.c had no copyright info in it). - * - * Martin Krause, 8 Jun 2006 - * Added SERIAL_MULTI support - */ - -/* - * Minimal serial functions needed to use one of the PSC ports - * as serial console interface. - */ - -#include <common.h> -#include <linux/compiler.h> -#include <mpc5xxx.h> -#include <serial.h> - -DECLARE_GLOBAL_DATA_PTR; - -#if defined(CONFIG_PSC_CONSOLE) - -#if CONFIG_PSC_CONSOLE == 1 -#define PSC_BASE MPC5XXX_PSC1 -#elif CONFIG_PSC_CONSOLE == 2 -#define PSC_BASE MPC5XXX_PSC2 -#elif CONFIG_PSC_CONSOLE == 3 -#define PSC_BASE MPC5XXX_PSC3 -#elif CONFIG_PSC_CONSOLE == 4 -#define PSC_BASE MPC5XXX_PSC4 -#elif CONFIG_PSC_CONSOLE == 5 -#define PSC_BASE MPC5XXX_PSC5 -#elif CONFIG_PSC_CONSOLE == 6 -#define PSC_BASE MPC5XXX_PSC6 -#else -#error CONFIG_PSC_CONSOLE must be in 1 ... 6 -#endif - -#if defined(CONFIG_PSC_CONSOLE2) - -#if CONFIG_PSC_CONSOLE2 == 1 -#define PSC_BASE2 MPC5XXX_PSC1 -#elif CONFIG_PSC_CONSOLE2 == 2 -#define PSC_BASE2 MPC5XXX_PSC2 -#elif CONFIG_PSC_CONSOLE2 == 3 -#define PSC_BASE2 MPC5XXX_PSC3 -#elif CONFIG_PSC_CONSOLE2 == 4 -#define PSC_BASE2 MPC5XXX_PSC4 -#elif CONFIG_PSC_CONSOLE2 == 5 -#define PSC_BASE2 MPC5XXX_PSC5 -#elif CONFIG_PSC_CONSOLE2 == 6 -#define PSC_BASE2 MPC5XXX_PSC6 -#else -#error CONFIG_PSC_CONSOLE2 must be in 1 ... 6 -#endif - -#endif - -int serial_init_dev (unsigned long dev_base) -{ - volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)dev_base; - unsigned long baseclk; - int div; - - /* reset PSC */ - psc->command = PSC_SEL_MODE_REG_1; - - /* select clock sources */ - psc->psc_clock_select = 0; - baseclk = (gd->arch.ipb_clk + 16) / 32; - - /* switch to UART mode */ - psc->sicr = 0; - - /* configure parity, bit length and so on */ - psc->mode = PSC_MODE_8_BITS | PSC_MODE_PARNONE; - psc->mode = PSC_MODE_ONE_STOP; - - /* set up UART divisor */ - div = (baseclk + (gd->baudrate/2)) / gd->baudrate; - psc->ctur = (div >> 8) & 0xff; - psc->ctlr = div & 0xff; - - /* disable all interrupts */ - psc->psc_imr = 0; - - /* reset and enable Rx/Tx */ - psc->command = PSC_RST_RX; - psc->command = PSC_RST_TX; - psc->command = PSC_RX_ENABLE | PSC_TX_ENABLE; - - return (0); -} - -void serial_putc_dev (unsigned long dev_base, const char c) -{ - volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)dev_base; - - if (c == '\n') - serial_putc_dev (dev_base, '\r'); - - /* Wait for last character to go. */ - while (!(psc->psc_status & PSC_SR_TXEMP)) - ; - - psc->psc_buffer_8 = c; -} - -void serial_puts_dev (unsigned long dev_base, const char *s) -{ - while (*s) { - serial_putc_dev (dev_base, *s++); - } -} - -int serial_getc_dev (unsigned long dev_base) -{ - volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)dev_base; - - /* Wait for a character to arrive. */ - while (!(psc->psc_status & PSC_SR_RXRDY)) - ; - - return psc->psc_buffer_8; -} - -int serial_tstc_dev (unsigned long dev_base) -{ - volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)dev_base; - - return (psc->psc_status & PSC_SR_RXRDY); -} - -void serial_setbrg_dev (unsigned long dev_base) -{ - volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)dev_base; - unsigned long baseclk, div; - - baseclk = (gd->arch.ipb_clk + 16) / 32; - - /* set up UART divisor */ - div = (baseclk + (gd->baudrate/2)) / gd->baudrate; - psc->ctur = (div >> 8) & 0xFF; - psc->ctlr = div & 0xff; -} - -void serial_setrts_dev (unsigned long dev_base, int s) -{ - volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)dev_base; - - if (s) { - /* Assert RTS (become LOW) */ - psc->op1 = 0x1; - } - else { - /* Negate RTS (become HIGH) */ - psc->op0 = 0x1; - } -} - -int serial_getcts_dev (unsigned long dev_base) -{ - volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)dev_base; - - return (psc->ip & 0x1) ? 0 : 1; -} - -int serial0_init(void) -{ - return (serial_init_dev(PSC_BASE)); -} - -void serial0_setbrg (void) -{ - serial_setbrg_dev(PSC_BASE); -} - -void serial0_putc(const char c) -{ - serial_putc_dev(PSC_BASE,c); -} - -void serial0_puts(const char *s) -{ - serial_puts_dev(PSC_BASE, s); -} - -int serial0_getc(void) -{ - return(serial_getc_dev(PSC_BASE)); -} - -int serial0_tstc(void) -{ - return (serial_tstc_dev(PSC_BASE)); -} - -struct serial_device serial0_device = -{ - .name = "serial0", - .start = serial0_init, - .stop = NULL, - .setbrg = serial0_setbrg, - .getc = serial0_getc, - .tstc = serial0_tstc, - .putc = serial0_putc, - .puts = serial0_puts, -}; - -__weak struct serial_device *default_serial_console(void) -{ - return &serial0_device; -} - -#ifdef CONFIG_PSC_CONSOLE2 -int serial1_init(void) -{ - return serial_init_dev(PSC_BASE2); -} - -void serial1_setbrg(void) -{ - serial_setbrg_dev(PSC_BASE2); -} - -void serial1_putc(const char c) -{ - serial_putc_dev(PSC_BASE2, c); -} - -void serial1_puts(const char *s) -{ - serial_puts_dev(PSC_BASE2, s); -} - -int serial1_getc(void) -{ - return serial_getc_dev(PSC_BASE2); -} - -int serial1_tstc(void) -{ - return serial_tstc_dev(PSC_BASE2); -} - -struct serial_device serial1_device = -{ - .name = "serial1", - .start = serial1_init, - .stop = NULL, - .setbrg = serial1_setbrg, - .getc = serial1_getc, - .tstc = serial1_tstc, - .putc = serial1_putc, - .puts = serial1_puts, -}; -#endif /* CONFIG_PSC_CONSOLE2 */ - -#endif /* CONFIG_PSC_CONSOLE */ diff --git a/arch/powerpc/cpu/mpc5xxx/speed.c b/arch/powerpc/cpu/mpc5xxx/speed.c deleted file mode 100644 index b37c4a5208..0000000000 --- a/arch/powerpc/cpu/mpc5xxx/speed.c +++ /dev/null @@ -1,84 +0,0 @@ -/* - * (C) Copyright 2000-2002 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <mpc5xxx.h> -#include <asm/processor.h> - -DECLARE_GLOBAL_DATA_PTR; - -/* ------------------------------------------------------------------------- */ - -/* Bus-to-Core Multipliers */ - -static int bus2core[] = { - 3, 2, 2, 2, 4, 4, 5, 9, - 6, 11, 8, 10, 3, 12, 7, 0, - 6, 5, 13, 2, 14, 4, 15, 9, - 0, 11, 8, 10, 16, 12, 7, 0 -}; -/* ------------------------------------------------------------------------- */ - -/* - * - */ - -int get_clocks (void) -{ - ulong val, vco; - -#if !defined(CONFIG_SYS_MPC5XXX_CLKIN) -#error clock measuring not implemented yet - define CONFIG_SYS_MPC5XXX_CLKIN -#endif - - val = *(vu_long *)MPC5XXX_CDM_PORCFG; - if (val & (1 << 6)) { - vco = CONFIG_SYS_MPC5XXX_CLKIN * 12; - } else { - vco = CONFIG_SYS_MPC5XXX_CLKIN * 16; - } - if (val & (1 << 5)) { - gd->bus_clk = vco / 8; - } else { - gd->bus_clk = vco / 4; - } - gd->cpu_clk = gd->bus_clk * bus2core[val & 0x1f] / 2; - - val = *(vu_long *)MPC5XXX_CDM_CFG; - if (val & (1 << 8)) { - gd->arch.ipb_clk = gd->bus_clk / 2; - } else { - gd->arch.ipb_clk = gd->bus_clk; - } - switch (val & 3) { - case 0: - gd->pci_clk = gd->arch.ipb_clk; - break; - case 1: - gd->pci_clk = gd->arch.ipb_clk / 2; - break; - default: - gd->pci_clk = gd->bus_clk / 4; - break; - } - - return (0); -} - -int print_cpuinfo(void) -{ - char buf1[32], buf2[32], buf3[32]; - - printf (" Bus %s MHz, IPB %s MHz, PCI %s MHz\n", - strmhz(buf1, gd->bus_clk), - strmhz(buf2, gd->arch.ipb_clk), - strmhz(buf3, gd->pci_clk) - ); - return (0); -} - -/* ------------------------------------------------------------------------- */ diff --git a/arch/powerpc/cpu/mpc5xxx/spl_boot.c b/arch/powerpc/cpu/mpc5xxx/spl_boot.c deleted file mode 100644 index 2d7f6c4a93..0000000000 --- a/arch/powerpc/cpu/mpc5xxx/spl_boot.c +++ /dev/null @@ -1,76 +0,0 @@ -/* - * Copyright (C) 2012 Stefan Roese sr@denx.de - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <spl.h> - -DECLARE_GLOBAL_DATA_PTR; - -/* - * Needed to align size SPL image to a 4-byte length - */ -u32 end_align __attribute__ ((section(".end_align"))); - -/* - * Return selected boot device. On MPC5200 its only NOR flash right now. - */ -u32 spl_boot_device(void) -{ - return BOOT_DEVICE_NOR; -} - -/* - * SPL version of board_init_f() - */ -void board_init_f(ulong bootflag) -{ - end_align = (u32)__spl_flash_end; - - /* - * On MPC5200, the initial RAM (and gd) is located in the internal - * SRAM. So we can actually call the preloader console init code - * before calling dram_init(). This makes serial output (printf) - * available very early, even before SDRAM init, which has been - * an U-Boot priciple from day 1. - */ - - /* - * Init global_data pointer. Has to be done before calling - * get_clocks(), as it stores some clock values into gd needed - * later on in the serial driver. - */ - /* Pointer is writable since we allocated a register for it */ - gd = (gd_t *)(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET); - /* Clear initial global data */ - memset((void *)gd, 0, sizeof(gd_t)); - - /* - * get_clocks() needs to be called so that the serial driver - * works correctly - */ - get_clocks(); - - /* - * Do rudimental console / serial setup - */ - preloader_console_init(); - - /* - * First we need to initialize the SDRAM, so that the real - * U-Boot or the OS (Linux) can be loaded - */ - dram_init(); - - /* Clear bss */ - memset(__bss_start, '\0', __bss_end - __bss_start); - - /* - * Call board_init_r() (SPL framework version) to load and boot - * real U-Boot or OS - */ - board_init_r(NULL, 0); - /* Does not return!!! */ -} diff --git a/arch/powerpc/cpu/mpc5xxx/start.S b/arch/powerpc/cpu/mpc5xxx/start.S deleted file mode 100644 index b4c5543eb5..0000000000 --- a/arch/powerpc/cpu/mpc5xxx/start.S +++ /dev/null @@ -1,780 +0,0 @@ -/* - * Copyright (C) 1998 Dan Malek dmalek@jlc.net - * Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se> - * Copyright (C) 2000 - 2003 Wolfgang Denk wd@denx.de - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * U-Boot - Startup Code for MPC5xxx CPUs - */ -#include <asm-offsets.h> -#include <config.h> -#include <mpc5xxx.h> -#include <version.h> - -#include <ppc_asm.tmpl> -#include <ppc_defs.h> - -#include <asm/cache.h> -#include <asm/mmu.h> -#include <asm/u-boot.h> - -/* We don't want the MMU yet. -*/ -#undef MSR_KERNEL -/* Floating Point enable, Machine Check and Recoverable Interr. */ -#ifdef DEBUG -#define MSR_KERNEL (MSR_FP|MSR_RI) -#else -#define MSR_KERNEL (MSR_FP|MSR_ME|MSR_RI) -#endif - -#ifndef CONFIG_SPL_BUILD -/* - * Set up GOT: Global Offset Table - * - * Use r12 to access the GOT - */ - START_GOT - GOT_ENTRY(_GOT2_TABLE_) - GOT_ENTRY(_FIXUP_TABLE_) - - GOT_ENTRY(_start) - GOT_ENTRY(_start_of_vectors) - GOT_ENTRY(_end_of_vectors) - GOT_ENTRY(transfer_to_handler) - - GOT_ENTRY(__init_end) - GOT_ENTRY(__bss_end) - GOT_ENTRY(__bss_start) - END_GOT -#endif - -/* - * Version string - */ - .data - .globl version_string -version_string: - .ascii U_BOOT_VERSION_STRING, "\0" - -/* - * Exception vectors - */ - .text - . = EXC_OFF_SYS_RESET - .globl _start -_start: - -#if defined(CONFIG_SPL) && !defined(CONFIG_SPL_BUILD) - /* - * This is the entry of the real U-Boot from a board port - * that supports SPL booting on the MPC5200. We only need - * to call board_init_f() here. Everything else has already - * been done in the SPL u-boot version. - */ - GET_GOT /* initialize GOT access */ - - /* - * The GD (global data) struct needs to get cleared. Lets do - * this by calling memset(). - * This function is called when the platform is build with SPL - * support from the main (full-blown) U-Boot. And the GD needs - * to get cleared (again) so that the following generic - * board support code initializes all variables correctly. - */ - mr r3, r2 /* parameter 1: GD pointer */ - li r4,0 /* parameter 2: value to fill */ - li r5,GD_SIZE /* parameter 3: count */ - bl memset - - li r3, 0 /* parameter 1: bootflag */ - bl board_init_f /* run 1st part of board init code (in Flash)*/ - /* NOTREACHED - board_init_f() does not return */ -#else - mfmsr r5 /* save msr contents */ - - /* Move CSBoot and adjust instruction pointer */ - /*--------------------------------------------------------------*/ - -#if defined(CONFIG_SYS_LOWBOOT) -# if defined(CONFIG_SYS_RAMBOOT) -# error CONFIG_SYS_LOWBOOT is incompatible with CONFIG_SYS_RAMBOOT -# endif /* CONFIG_SYS_RAMBOOT */ - lis r4, CONFIG_SYS_DEFAULT_MBAR@h - lis r3, START_REG(CONFIG_SYS_BOOTCS_START)@h - ori r3, r3, START_REG(CONFIG_SYS_BOOTCS_START)@l - stw r3, 0x4(r4) /* CS0 start */ - lis r3, STOP_REG(CONFIG_SYS_BOOTCS_START, CONFIG_SYS_BOOTCS_SIZE)@h - ori r3, r3, STOP_REG(CONFIG_SYS_BOOTCS_START, CONFIG_SYS_BOOTCS_SIZE)@l - stw r3, 0x8(r4) /* CS0 stop */ - lis r3, 0x02010000@h - ori r3, r3, 0x02010000@l - stw r3, 0x54(r4) /* CS0 and Boot enable */ - - lis r3, lowboot_reentry@h /* jump from bootlow address space (0x0000xxxx) */ - ori r3, r3, lowboot_reentry@l /* to the address space the linker used */ - mtlr r3 - blr - -lowboot_reentry: - lis r3, START_REG(CONFIG_SYS_BOOTCS_START)@h - ori r3, r3, START_REG(CONFIG_SYS_BOOTCS_START)@l - stw r3, 0x4c(r4) /* Boot start */ - lis r3, STOP_REG(CONFIG_SYS_BOOTCS_START, CONFIG_SYS_BOOTCS_SIZE)@h - ori r3, r3, STOP_REG(CONFIG_SYS_BOOTCS_START, CONFIG_SYS_BOOTCS_SIZE)@l - stw r3, 0x50(r4) /* Boot stop */ - lis r3, 0x02000001@h - ori r3, r3, 0x02000001@l - stw r3, 0x54(r4) /* Boot enable, CS0 disable */ -#endif /* CONFIG_SYS_LOWBOOT */ - -#if defined(CONFIG_SYS_DEFAULT_MBAR) && !defined(CONFIG_SYS_RAMBOOT) - lis r3, CONFIG_SYS_MBAR@h - ori r3, r3, CONFIG_SYS_MBAR@l - /* MBAR is mirrored into the MBAR SPR */ - mtspr MBAR,r3 - rlwinm r3, r3, 16, 16, 31 - lis r4, CONFIG_SYS_DEFAULT_MBAR@h - stw r3, 0(r4) -#endif /* CONFIG_SYS_DEFAULT_MBAR */ - - /* Initialise the MPC5xxx processor core */ - /*--------------------------------------------------------------*/ - - bl init_5xxx_core - - /* initialize some things that are hard to access from C */ - /*--------------------------------------------------------------*/ - - /* set up stack in on-chip SRAM */ - lis r3, CONFIG_SYS_INIT_RAM_ADDR@h - ori r3, r3, CONFIG_SYS_INIT_RAM_ADDR@l - ori r1, r3, CONFIG_SYS_INIT_SP_OFFSET - li r0, 0 /* Make room for stack frame header and */ - stwu r0, -4(r1) /* clear final stack frame so that */ - stwu r0, -4(r1) /* stack backtraces terminate cleanly */ - - /* let the C-code set up the rest */ - /* */ - /* Be careful to keep code relocatable ! */ - /*--------------------------------------------------------------*/ - -#ifndef CONFIG_SPL_BUILD - GET_GOT /* initialize GOT access */ -#endif - - /* r3: IMMR */ - bl cpu_init_f /* run low-level CPU init code (in Flash)*/ - - li r3, 0 /* parameter 1: bootflag */ - bl board_init_f /* run 1st part of board init code (in Flash)*/ - - /* NOTREACHED - board_init_f() does not return */ -#endif - -#ifndef CONFIG_SPL_BUILD -/* - * Vector Table - */ - - .globl _start_of_vectors -_start_of_vectors: - -/* Machine check */ - STD_EXCEPTION(0x200, MachineCheck, MachineCheckException) - -/* Data Storage exception. */ - STD_EXCEPTION(0x300, DataStorage, UnknownException) - -/* Instruction Storage exception. */ - STD_EXCEPTION(0x400, InstStorage, UnknownException) - -/* External Interrupt exception. */ - STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt) - -/* Alignment exception. */ - . = 0x600 -Alignment: - EXCEPTION_PROLOG(SRR0, SRR1) - mfspr r4,DAR - stw r4,_DAR(r21) - mfspr r5,DSISR - stw r5,_DSISR(r21) - addi r3,r1,STACK_FRAME_OVERHEAD - EXC_XFER_TEMPLATE(Alignment, AlignmentException, MSR_KERNEL, COPY_EE) - -/* Program check exception */ - . = 0x700 -ProgramCheck: - EXCEPTION_PROLOG(SRR0, SRR1) - addi r3,r1,STACK_FRAME_OVERHEAD - EXC_XFER_TEMPLATE(ProgramCheck, ProgramCheckException, - MSR_KERNEL, COPY_EE) - - STD_EXCEPTION(0x800, FPUnavailable, UnknownException) - - /* I guess we could implement decrementer, and may have - * to someday for timekeeping. - */ - STD_EXCEPTION(0x900, Decrementer, timer_interrupt) - - STD_EXCEPTION(0xa00, Trap_0a, UnknownException) - STD_EXCEPTION(0xb00, Trap_0b, UnknownException) - STD_EXCEPTION(0xc00, SystemCall, UnknownException) - STD_EXCEPTION(0xd00, SingleStep, UnknownException) - - STD_EXCEPTION(0xe00, Trap_0e, UnknownException) - STD_EXCEPTION(0xf00, Trap_0f, UnknownException) - - STD_EXCEPTION(0x1000, InstructionTLBMiss, UnknownException) - STD_EXCEPTION(0x1100, DataLoadTLBMiss, UnknownException) - STD_EXCEPTION(0x1200, DataStoreTLBMiss, UnknownException) -#ifdef DEBUG - . = 0x1300 - /* - * This exception occurs when the program counter matches the - * Instruction Address Breakpoint Register (IABR). - * - * I want the cpu to halt if this occurs so I can hunt around - * with the debugger and look at things. - * - * When DEBUG is defined, both machine check enable (in the MSR) - * and checkstop reset enable (in the reset mode register) are - * turned off and so a checkstop condition will result in the cpu - * halting. - * - * I force the cpu into a checkstop condition by putting an illegal - * instruction here (at least this is the theory). - * - * well - that didnt work, so just do an infinite loop! - */ -1: b 1b -#else - STD_EXCEPTION(0x1300, InstructionBreakpoint, DebugException) -#endif - STD_EXCEPTION(0x1400, SMI, UnknownException) - - STD_EXCEPTION(0x1500, Trap_15, UnknownException) - STD_EXCEPTION(0x1600, Trap_16, UnknownException) - STD_EXCEPTION(0x1700, Trap_17, UnknownException) - STD_EXCEPTION(0x1800, Trap_18, UnknownException) - STD_EXCEPTION(0x1900, Trap_19, UnknownException) - STD_EXCEPTION(0x1a00, Trap_1a, UnknownException) - STD_EXCEPTION(0x1b00, Trap_1b, UnknownException) - STD_EXCEPTION(0x1c00, Trap_1c, UnknownException) - STD_EXCEPTION(0x1d00, Trap_1d, UnknownException) - STD_EXCEPTION(0x1e00, Trap_1e, UnknownException) - STD_EXCEPTION(0x1f00, Trap_1f, UnknownException) - STD_EXCEPTION(0x2000, Trap_20, UnknownException) - STD_EXCEPTION(0x2100, Trap_21, UnknownException) - STD_EXCEPTION(0x2200, Trap_22, UnknownException) - STD_EXCEPTION(0x2300, Trap_23, UnknownException) - STD_EXCEPTION(0x2400, Trap_24, UnknownException) - STD_EXCEPTION(0x2500, Trap_25, UnknownException) - STD_EXCEPTION(0x2600, Trap_26, UnknownException) - STD_EXCEPTION(0x2700, Trap_27, UnknownException) - STD_EXCEPTION(0x2800, Trap_28, UnknownException) - STD_EXCEPTION(0x2900, Trap_29, UnknownException) - STD_EXCEPTION(0x2a00, Trap_2a, UnknownException) - STD_EXCEPTION(0x2b00, Trap_2b, UnknownException) - STD_EXCEPTION(0x2c00, Trap_2c, UnknownException) - STD_EXCEPTION(0x2d00, Trap_2d, UnknownException) - STD_EXCEPTION(0x2e00, Trap_2e, UnknownException) - STD_EXCEPTION(0x2f00, Trap_2f, UnknownException) - - - .globl _end_of_vectors -_end_of_vectors: - - . = 0x3000 - -/* - * This code finishes saving the registers to the exception frame - * and jumps to the appropriate handler for the exception. - * Register r21 is pointer into trap frame, r1 has new stack pointer. - */ - .globl transfer_to_handler -transfer_to_handler: - stw r22,_NIP(r21) - lis r22,MSR_POW@h - andc r23,r23,r22 - stw r23,_MSR(r21) - SAVE_GPR(7, r21) - SAVE_4GPRS(8, r21) - SAVE_8GPRS(12, r21) - SAVE_8GPRS(24, r21) - mflr r23 - andi. r24,r23,0x3f00 /* get vector offset */ - stw r24,TRAP(r21) - li r22,0 - stw r22,RESULT(r21) - lwz r24,0(r23) /* virtual address of handler */ - lwz r23,4(r23) /* where to go when done */ - mtspr SRR0,r24 - mtspr SRR1,r20 - mtlr r23 - SYNC - rfi /* jump to handler, enable MMU */ - -int_return: - mfmsr r28 /* Disable interrupts */ - li r4,0 - ori r4,r4,MSR_EE - andc r28,r28,r4 - SYNC /* Some chip revs need this... */ - mtmsr r28 - SYNC - lwz r2,_CTR(r1) - lwz r0,_LINK(r1) - mtctr r2 - mtlr r0 - lwz r2,_XER(r1) - lwz r0,_CCR(r1) - mtspr XER,r2 - mtcrf 0xFF,r0 - REST_10GPRS(3, r1) - REST_10GPRS(13, r1) - REST_8GPRS(23, r1) - REST_GPR(31, r1) - lwz r2,_NIP(r1) /* Restore environment */ - lwz r0,_MSR(r1) - mtspr SRR0,r2 - mtspr SRR1,r0 - lwz r0,GPR0(r1) - lwz r2,GPR2(r1) - lwz r1,GPR1(r1) - SYNC - rfi -#endif /* CONFIG_SPL_BUILD */ - -/* - * This code initialises the MPC5xxx processor core - * (conforms to PowerPC 603e spec) - * Note: expects original MSR contents to be in r5. - */ - - .globl init_5xx_core -init_5xxx_core: - - /* Initialize machine status; enable machine check interrupt */ - /*--------------------------------------------------------------*/ - - li r3, MSR_KERNEL /* Set ME and RI flags */ - rlwimi r3, r5, 0, 25, 25 /* preserve IP bit set by HRCW */ -#ifdef DEBUG - rlwimi r3, r5, 0, 21, 22 /* debugger might set SE & BE bits */ -#endif - SYNC /* Some chip revs need this... */ - mtmsr r3 - SYNC - mtspr SRR1, r3 /* Make SRR1 match MSR */ - - /* Initialize the Hardware Implementation-dependent Registers */ - /* HID0 also contains cache control */ - /*--------------------------------------------------------------*/ - - lis r3, CONFIG_SYS_HID0_INIT@h - ori r3, r3, CONFIG_SYS_HID0_INIT@l - SYNC - mtspr HID0, r3 - - lis r3, CONFIG_SYS_HID0_FINAL@h - ori r3, r3, CONFIG_SYS_HID0_FINAL@l - SYNC - mtspr HID0, r3 - - /* clear all BAT's */ - /*--------------------------------------------------------------*/ - - li r0, 0 - mtspr DBAT0U, r0 - mtspr DBAT0L, r0 - mtspr DBAT1U, r0 - mtspr DBAT1L, r0 - mtspr DBAT2U, r0 - mtspr DBAT2L, r0 - mtspr DBAT3U, r0 - mtspr DBAT3L, r0 - mtspr DBAT4U, r0 - mtspr DBAT4L, r0 - mtspr DBAT5U, r0 - mtspr DBAT5L, r0 - mtspr DBAT6U, r0 - mtspr DBAT6L, r0 - mtspr DBAT7U, r0 - mtspr DBAT7L, r0 - mtspr IBAT0U, r0 - mtspr IBAT0L, r0 - mtspr IBAT1U, r0 - mtspr IBAT1L, r0 - mtspr IBAT2U, r0 - mtspr IBAT2L, r0 - mtspr IBAT3U, r0 - mtspr IBAT3L, r0 - mtspr IBAT4U, r0 - mtspr IBAT4L, r0 - mtspr IBAT5U, r0 - mtspr IBAT5L, r0 - mtspr IBAT6U, r0 - mtspr IBAT6L, r0 - mtspr IBAT7U, r0 - mtspr IBAT7L, r0 - SYNC - - /* invalidate all tlb's */ - /* */ - /* From the 603e User Manual: "The 603e provides the ability to */ - /* invalidate a TLB entry. The TLB Invalidate Entry (tlbie) */ - /* instruction invalidates the TLB entry indexed by the EA, and */ - /* operates on both the instruction and data TLBs simultaneously*/ - /* invalidating four TLB entries (both sets in each TLB). The */ - /* index corresponds to bits 15-19 of the EA. To invalidate all */ - /* entries within both TLBs, 32 tlbie instructions should be */ - /* issued, incrementing this field by one each time." */ - /* */ - /* "Note that the tlbia instruction is not implemented on the */ - /* 603e." */ - /* */ - /* bits 15-19 correspond to addresses 0x00000000 to 0x0001F000 */ - /* incrementing by 0x1000 each time. The code below is sort of */ - /* based on code in "flush_tlbs" from arch/powerpc/kernel/head.S */ - /* */ - /*--------------------------------------------------------------*/ - - li r3, 32 - mtctr r3 - li r3, 0 -1: tlbie r3 - addi r3, r3, 0x1000 - bdnz 1b - SYNC - - /* Done! */ - /*--------------------------------------------------------------*/ - - blr - -/* Cache functions. - * - * Note: requires that all cache bits in - * HID0 are in the low half word. - */ - .globl icache_enable -icache_enable: - mfspr r3, HID0 - ori r3, r3, HID0_ICE - lis r4, 0 - ori r4, r4, HID0_ILOCK - andc r3, r3, r4 - ori r4, r3, HID0_ICFI - isync - mtspr HID0, r4 /* sets enable and invalidate, clears lock */ - isync - mtspr HID0, r3 /* clears invalidate */ - blr - - .globl icache_disable -icache_disable: - mfspr r3, HID0 - lis r4, 0 - ori r4, r4, HID0_ICE|HID0_ILOCK - andc r3, r3, r4 - ori r4, r3, HID0_ICFI - isync - mtspr HID0, r4 /* sets invalidate, clears enable and lock */ - isync - mtspr HID0, r3 /* clears invalidate */ - blr - - .globl icache_status -icache_status: - mfspr r3, HID0 - rlwinm r3, r3, HID0_ICE_BITPOS + 1, 31, 31 - blr - - .globl dcache_enable -dcache_enable: - mfspr r3, HID0 - ori r3, r3, HID0_DCE - lis r4, 0 - ori r4, r4, HID0_DLOCK - andc r3, r3, r4 - ori r4, r3, HID0_DCI - sync - mtspr HID0, r4 /* sets enable and invalidate, clears lock */ - sync - mtspr HID0, r3 /* clears invalidate */ - blr - - .globl dcache_disable -dcache_disable: - mfspr r3, HID0 - lis r4, 0 - ori r4, r4, HID0_DCE|HID0_DLOCK - andc r3, r3, r4 - ori r4, r3, HID0_DCI - sync - mtspr HID0, r4 /* sets invalidate, clears enable and lock */ - sync - mtspr HID0, r3 /* clears invalidate */ - blr - - .globl dcache_status -dcache_status: - mfspr r3, HID0 - rlwinm r3, r3, HID0_DCE_BITPOS + 1, 31, 31 - blr - - .globl get_svr -get_svr: - mfspr r3, SVR - blr - - .globl get_pvr -get_pvr: - mfspr r3, PVR - blr - -#ifndef CONFIG_SPL_BUILD -/*------------------------------------------------------------------------------*/ - -/* - * void relocate_code (addr_sp, gd, addr_moni) - * - * This "function" does not return, instead it continues in RAM - * after relocating the monitor code. - * - * r3 = dest - * r4 = src - * r5 = length in bytes - * r6 = cachelinesize - */ - .globl relocate_code -relocate_code: - mr r1, r3 /* Set new stack pointer */ - mr r9, r4 /* Save copy of Global Data pointer */ - mr r10, r5 /* Save copy of Destination Address */ - - GET_GOT - mr r3, r5 /* Destination Address */ - lis r4, CONFIG_SYS_MONITOR_BASE@h /* Source Address */ - ori r4, r4, CONFIG_SYS_MONITOR_BASE@l - lwz r5, GOT(__init_end) - sub r5, r5, r4 - li r6, CONFIG_SYS_CACHELINE_SIZE /* Cache Line Size */ - - /* - * Fix GOT pointer: - * - * New GOT-PTR = (old GOT-PTR - CONFIG_SYS_MONITOR_BASE) + Destination Address - * - * Offset: - */ - sub r15, r10, r4 - - /* First our own GOT */ - add r12, r12, r15 - /* then the one used by the C code */ - add r30, r30, r15 - - /* - * Now relocate code - */ - - cmplw cr1,r3,r4 - addi r0,r5,3 - srwi. r0,r0,2 - beq cr1,4f /* In place copy is not necessary */ - beq 7f /* Protect against 0 count */ - mtctr r0 - bge cr1,2f - - la r8,-4(r4) - la r7,-4(r3) -1: lwzu r0,4(r8) - stwu r0,4(r7) - bdnz 1b - b 4f - -2: slwi r0,r0,2 - add r8,r4,r0 - add r7,r3,r0 -3: lwzu r0,-4(r8) - stwu r0,-4(r7) - bdnz 3b - -/* - * Now flush the cache: note that we must start from a cache aligned - * address. Otherwise we might miss one cache line. - */ -4: cmpwi r6,0 - add r5,r3,r5 - beq 7f /* Always flush prefetch queue in any case */ - subi r0,r6,1 - andc r3,r3,r0 - mfspr r7,HID0 /* don't do dcbst if dcache is disabled */ - rlwinm r7,r7,HID0_DCE_BITPOS+1,31,31 - cmpwi r7,0 - beq 9f - mr r4,r3 -5: dcbst 0,r4 - add r4,r4,r6 - cmplw r4,r5 - blt 5b - sync /* Wait for all dcbst to complete on bus */ -9: mfspr r7,HID0 /* don't do icbi if icache is disabled */ - rlwinm r7,r7,HID0_ICE_BITPOS+1,31,31 - cmpwi r7,0 - beq 7f - mr r4,r3 -6: icbi 0,r4 - add r4,r4,r6 - cmplw r4,r5 - blt 6b -7: sync /* Wait for all icbi to complete on bus */ - isync - -/* - * We are done. Do not return, instead branch to second part of board - * initialization, now running from RAM. - */ - - addi r0, r10, in_ram - _start + EXC_OFF_SYS_RESET - mtlr r0 - blr - -in_ram: - - /* - * Relocation Function, r12 point to got2+0x8000 - * - * Adjust got2 pointers, no need to check for 0, this code - * already puts a few entries in the table. - */ - li r0,__got2_entries@sectoff@l - la r3,GOT(_GOT2_TABLE_) - lwz r11,GOT(_GOT2_TABLE_) - mtctr r0 - sub r11,r3,r11 - addi r3,r3,-4 -1: lwzu r0,4(r3) - cmpwi r0,0 - beq- 2f - add r0,r0,r11 - stw r0,0(r3) -2: bdnz 1b - - /* - * Now adjust the fixups and the pointers to the fixups - * in case we need to move ourselves again. - */ - li r0,__fixup_entries@sectoff@l - lwz r3,GOT(_FIXUP_TABLE_) - cmpwi r0,0 - mtctr r0 - addi r3,r3,-4 - beq 4f -3: lwzu r4,4(r3) - lwzux r0,r4,r11 - cmpwi r0,0 - add r0,r0,r11 - stw r4,0(r3) - beq- 5f - stw r0,0(r4) -5: bdnz 3b -4: -clear_bss: - /* - * Now clear BSS segment - */ - lwz r3,GOT(__bss_start) - lwz r4,GOT(__bss_end) - - cmplw 0, r3, r4 - beq 6f - - li r0, 0 -5: - stw r0, 0(r3) - addi r3, r3, 4 - cmplw 0, r3, r4 - bne 5b -6: - - mr r3, r9 /* Global Data pointer */ - mr r4, r10 /* Destination Address */ - bl board_init_r - - /* - * Copy exception vector code to low memory - * - * r3: dest_addr - * r7: source address, r8: end address, r9: target address - */ - .globl trap_init -trap_init: - mflr r4 /* save link register */ - GET_GOT - lwz r7, GOT(_start) - lwz r8, GOT(_end_of_vectors) - - li r9, 0x100 /* reset vector always at 0x100 */ - - cmplw 0, r7, r8 - bgelr /* return if r7>=r8 - just in case */ -1: - lwz r0, 0(r7) - stw r0, 0(r9) - addi r7, r7, 4 - addi r9, r9, 4 - cmplw 0, r7, r8 - bne 1b - - /* - * relocate `hdlr' and `int_return' entries - */ - li r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET - li r8, Alignment - _start + EXC_OFF_SYS_RESET -2: - bl trap_reloc - addi r7, r7, 0x100 /* next exception vector */ - cmplw 0, r7, r8 - blt 2b - - li r7, .L_Alignment - _start + EXC_OFF_SYS_RESET - bl trap_reloc - - li r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET - bl trap_reloc - - li r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET - li r8, SystemCall - _start + EXC_OFF_SYS_RESET -3: - bl trap_reloc - addi r7, r7, 0x100 /* next exception vector */ - cmplw 0, r7, r8 - blt 3b - - li r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET - li r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET -4: - bl trap_reloc - addi r7, r7, 0x100 /* next exception vector */ - cmplw 0, r7, r8 - blt 4b - - mfmsr r3 /* now that the vectors have */ - lis r7, MSR_IP@h /* relocated into low memory */ - ori r7, r7, MSR_IP@l /* MSR[IP] can be turned off */ - andc r3, r3, r7 /* (if it was on) */ - SYNC /* Some chip revs need this... */ - mtmsr r3 - SYNC - - mtlr r4 /* restore link register */ - blr - -#endif /* CONFIG_SPL_BUILD */ diff --git a/arch/powerpc/cpu/mpc5xxx/traps.c b/arch/powerpc/cpu/mpc5xxx/traps.c deleted file mode 100644 index 5498b7e699..0000000000 --- a/arch/powerpc/cpu/mpc5xxx/traps.c +++ /dev/null @@ -1,220 +0,0 @@ -/* - * linux/arch/powerpc/kernel/traps.c - * - * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) - * - * Modified by Cort Dougan (cort@cs.nmt.edu) - * and Paul Mackerras (paulus@cs.anu.edu.au) - * fixed Machine Check Reasons by Reinhard Meyer (r.meyer@emk-elektronik.de) - * - * (C) Copyright 2000-2003 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * This file handles the architecture-dependent parts of hardware exceptions - */ - -#include <common.h> -#include <command.h> -#include <kgdb.h> -#include <asm/processor.h> - -/* Returns 0 if exception not found and fixup otherwise. */ -extern unsigned long search_exception_table(unsigned long); - -/* THIS NEEDS CHANGING to use the board info structure. -*/ -#define END_OF_MEM 0x02000000 - -/* - * Trap & Exception support - */ - -static void print_backtrace(unsigned long *sp) -{ - int cnt = 0; - unsigned long i; - - printf("Call backtrace: "); - while (sp) { - if ((uint)sp > END_OF_MEM) - break; - - i = sp[1]; - if (cnt++ % 7 == 0) - printf("\n"); - printf("%08lX ", i); - if (cnt > 32) break; - sp = (unsigned long *)*sp; - } - printf("\n"); -} - -void show_regs(struct pt_regs *regs) -{ - int i; - - printf("NIP: %08lX XER: %08lX LR: %08lX REGS: %p TRAP: %04lx DAR: %08lX\n", - regs->nip, regs->xer, regs->link, regs, regs->trap, regs->dar); - printf("MSR: %08lx EE: %01x PR: %01x FP: %01x ME: %01x IR/DR: %01x%01x\n", - regs->msr, regs->msr&MSR_EE ? 1 : 0, regs->msr&MSR_PR ? 1 : 0, - regs->msr & MSR_FP ? 1 : 0,regs->msr&MSR_ME ? 1 : 0, - regs->msr&MSR_IR ? 1 : 0, - regs->msr&MSR_DR ? 1 : 0); - - printf("\n"); - for (i = 0; i < 32; i++) { - if ((i % 8) == 0) - { - printf("GPR%02d: ", i); - } - - printf("%08lX ", regs->gpr[i]); - if ((i % 8) == 7) - { - printf("\n"); - } - } -} - - -static void _exception(int signr, struct pt_regs *regs) -{ - show_regs(regs); - print_backtrace((unsigned long *)regs->gpr[1]); - panic("Exception in kernel pc %lx signal %d",regs->nip,signr); -} - -void MachineCheckException(struct pt_regs *regs) -{ - unsigned long fixup; - - /* Probing PCI using config cycles cause this exception - * when a device is not present. Catch it and return to - * the PCI exception handler. - */ - if ((fixup = search_exception_table(regs->nip)) != 0) { - regs->nip = fixup; - return; - } - -#if defined(CONFIG_CMD_KGDB) - if (debugger_exception_handler && (*debugger_exception_handler)(regs)) - return; -#endif - - printf("Machine check in kernel mode.\n"); - printf("Caused by (from msr): "); - printf("regs %p ",regs); - /* refer to 603e Manual (MPC603EUM/AD), chapter 4.5.2.1 */ - switch( regs->msr & 0x000F0000) - { - case (0x80000000>>12) : - printf("Machine check signal - probably due to mm fault\n" - "with mmu off\n"); - break; - case (0x80000000>>13) : - printf("Transfer error ack signal\n"); - break; - case (0x80000000>>14) : - printf("Data parity signal\n"); - break; - case (0x80000000>>15) : - printf("Address parity signal\n"); - break; - default: - printf("Unknown values in msr\n"); - } - show_regs(regs); - print_backtrace((unsigned long *)regs->gpr[1]); - panic("machine check"); -} - -void AlignmentException(struct pt_regs *regs) -{ -#if defined(CONFIG_CMD_KGDB) - if (debugger_exception_handler && (*debugger_exception_handler)(regs)) - return; -#endif - show_regs(regs); - print_backtrace((unsigned long *)regs->gpr[1]); - panic("Alignment Exception"); -} - -void ProgramCheckException(struct pt_regs *regs) -{ -#if defined(CONFIG_CMD_KGDB) - if (debugger_exception_handler && (*debugger_exception_handler)(regs)) - return; -#endif - show_regs(regs); - print_backtrace((unsigned long *)regs->gpr[1]); - panic("Program Check Exception"); -} - -void SoftEmuException(struct pt_regs *regs) -{ -#if defined(CONFIG_CMD_KGDB) - if (debugger_exception_handler && (*debugger_exception_handler)(regs)) - return; -#endif - show_regs(regs); - print_backtrace((unsigned long *)regs->gpr[1]); - panic("Software Emulation Exception"); -} - - -void UnknownException(struct pt_regs *regs) -{ -#if defined(CONFIG_CMD_KGDB) - if (debugger_exception_handler && (*debugger_exception_handler)(regs)) - return; -#endif - printf("Bad trap at PC: %lx, SR: %lx, vector=%lx\n", - regs->nip, regs->msr, regs->trap); - _exception(0, regs); -} - -#if defined(CONFIG_CMD_BEDBUG) -extern void do_bedbug_breakpoint(struct pt_regs *); -#endif - -void DebugException(struct pt_regs *regs) -{ - - printf("Debugger trap at @ %lx\n", regs->nip ); - show_regs(regs); -#if defined(CONFIG_CMD_BEDBUG) - do_bedbug_breakpoint( regs ); -#endif -} - -/* Probe an address by reading. If not present, return -1, otherwise - * return 0. - */ -int addr_probe(uint *addr) -{ -#if 0 - int retval; - - __asm__ __volatile__( \ - "1: lwz %0,0(%1)\n" \ - " eieio\n" \ - " li %0,0\n" \ - "2:\n" \ - ".section .fixup,"ax"\n" \ - "3: li %0,-1\n" \ - " b 2b\n" \ - ".section __ex_table,"a"\n" \ - " .align 2\n" \ - " .long 1b,3b\n" \ - ".text" \ - : "=r" (retval) : "r"(addr)); - - return (retval); -#endif - return 0; -} diff --git a/arch/powerpc/cpu/mpc5xxx/u-boot-customlayout.lds b/arch/powerpc/cpu/mpc5xxx/u-boot-customlayout.lds deleted file mode 100644 index 5354172af0..0000000000 --- a/arch/powerpc/cpu/mpc5xxx/u-boot-customlayout.lds +++ /dev/null @@ -1,80 +0,0 @@ -/* - * (C) Copyright 2003-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(powerpc) - -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - arch/powerpc/cpu/mpc5xxx/start.o (.text*) - arch/powerpc/cpu/mpc5xxx/traps.o (.text*) - - . = DEFINED(env_offset) ? env_offset : .; - common/env_embedded.o (.ppcenv*) - - *(.text*) - . = ALIGN(16); - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - - /* Read-write section, merged into data segment: */ - . = (. + 0x0FFF) & 0xFFFFF000; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - KEEP(*(.got)) - _GOT2_TABLE_ = .; - KEEP(*(.got2)) - _FIXUP_TABLE_ = .; - KEEP(*(.fixup)) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2; - __fixup_entries = (. - _FIXUP_TABLE_) >> 2; - - .data : - { - *(.data*) - *(.sdata*) - } - _edata = .; - PROVIDE (edata = .); - - . = .; - - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(4096); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(4096); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(.bss*) - *(.sbss*) - *(COMMON) - . = ALIGN(4); - } - __bss_end = . ; - PROVIDE (end = .); -} diff --git a/arch/powerpc/cpu/mpc5xxx/u-boot-spl.lds b/arch/powerpc/cpu/mpc5xxx/u-boot-spl.lds deleted file mode 100644 index 1aa925e932..0000000000 --- a/arch/powerpc/cpu/mpc5xxx/u-boot-spl.lds +++ /dev/null @@ -1,44 +0,0 @@ -/* - * Copyright 2012 Stefan Roese sr@denx.de - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -MEMORY -{ - sdram : ORIGIN = CONFIG_SPL_BSS_START_ADDR, - LENGTH = CONFIG_SPL_BSS_MAX_SIZE - flash : ORIGIN = CONFIG_SPL_TEXT_BASE, - LENGTH = CONFIG_SYS_SPL_MAX_LEN -} - -OUTPUT_ARCH(powerpc) -ENTRY(_start) -SECTIONS -{ - .text : - { - __start = .; - arch/powerpc/cpu/mpc5xxx/start.o (.text) - *(.text*) - } > flash - - . = ALIGN(4); - .data : { *(SORT_BY_ALIGNMENT(.data*)) } > flash - - . = ALIGN(4); - .rodata : { *(SORT_BY_ALIGNMENT(.rodata*)) } > flash - - . = ALIGN(4); - .end_align : { *(.end_align*) } > flash - __spl_flash_end = .; - - .bss : - { - . = ALIGN(4); - __bss_start = .; - *(.bss*) - . = ALIGN(4); - __bss_end = .; - } > sdram -} diff --git a/arch/powerpc/cpu/mpc5xxx/u-boot.lds b/arch/powerpc/cpu/mpc5xxx/u-boot.lds deleted file mode 100644 index aa80d3dbb1..0000000000 --- a/arch/powerpc/cpu/mpc5xxx/u-boot.lds +++ /dev/null @@ -1,75 +0,0 @@ -/* - * (C) Copyright 2003-2010 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(powerpc) - -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - .text : - { - arch/powerpc/cpu/mpc5xxx/start.o (.text*) - arch/powerpc/cpu/mpc5xxx/traps.o (.text*) - *(.text*) - . = ALIGN(16); - *(SORT_BY_ALIGNMENT(SORT_BY_NAME(.rodata*))) - } - - /* Read-write section, merged into data segment: */ - . = (. + 0x0FFF) & 0xFFFFF000; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - _GOT2_TABLE_ = .; - KEEP(*(.got2)) - KEEP(*(.got)) - _FIXUP_TABLE_ = .; - KEEP(*(.fixup)) - } - __got2_entries = ((_GLOBAL_OFFSET_TABLE_ - _GOT2_TABLE_) >> 2) - 1; - __fixup_entries = (. - _FIXUP_TABLE_) >> 2; - - .data : - { - *(.data*) - *(.sdata*) - } - _edata = .; - PROVIDE (edata = .); - - . = .; - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - - . = .; - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(4096); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(4096); - __init_end = .; - - __bss_start = .; - .bss (NOLOAD) : - { - *(COMMON) - *(.bss*) - *(.sbss*) - . = ALIGN(4); - } - __bss_end = . ; - PROVIDE (end = .); -} diff --git a/arch/powerpc/cpu/mpc5xxx/usb.c b/arch/powerpc/cpu/mpc5xxx/usb.c deleted file mode 100644 index bdf1484e25..0000000000 --- a/arch/powerpc/cpu/mpc5xxx/usb.c +++ /dev/null @@ -1,42 +0,0 @@ -/* - * (C) Copyright 2007 - * Markus Klotzbuecher, DENX Software Engineering mk@denx.de - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> - -#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT) - -#include <mpc5xxx.h> - -int usb_cpu_init(void) -{ - /* Set the USB Clock */ - *(vu_long *)MPC5XXX_CDM_48_FDC = CONFIG_USB_CLOCK; - -#ifdef CONFIG_PSC3_USB /* USB is using the alternate configuration */ - /* remove all PSC3 USB bits first before ORing in ours */ - *(vu_long *)MPC5XXX_GPS_PORT_CONFIG &= ~0x00804f00; -#else - /* remove all USB bits first before ORing in ours */ - *(vu_long *)MPC5XXX_GPS_PORT_CONFIG &= ~0x00807000; -#endif - /* Activate USB port */ - *(vu_long *)MPC5XXX_GPS_PORT_CONFIG |= CONFIG_USB_CONFIG; - - return 0; -} - -int usb_cpu_stop(void) -{ - return 0; -} - -int usb_cpu_init_fail(void) -{ - return 0; -} - -#endif /* defined(CONFIG_USB_OHCI) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT) */ diff --git a/arch/powerpc/cpu/mpc5xxx/usb_ohci.c b/arch/powerpc/cpu/mpc5xxx/usb_ohci.c deleted file mode 100644 index cf36954fe7..0000000000 --- a/arch/powerpc/cpu/mpc5xxx/usb_ohci.c +++ /dev/null @@ -1,1529 +0,0 @@ -/* - * URB OHCI HCD (Host Controller Driver) for USB on the MPC5200. - * - * (C) Copyright 2003-2004 - * Gary Jennejohn, DENX Software Engineering garyj@denx.de - * - * (C) Copyright 2004 - * Pierre Aubert, Staubli Faverges p.aubert@staubli.com - * - * Note: Much of this code has been derived from Linux 2.4 - * (C) Copyright 1999 Roman Weissgaerber weissg@vienna.at - * (C) Copyright 2000-2002 David Brownell - * - * SPDX-License-Identifier: GPL-2.0+ - */ -/* - * IMPORTANT NOTES - * 1 - this driver is intended for use with USB Mass Storage Devices - * (BBB) ONLY. There is NO support for Interrupt or Isochronous pipes! - */ - -#include <common.h> - -#ifdef CONFIG_USB_OHCI - -#include <malloc.h> -#include <usb.h> -#include "usb_ohci.h" - -#include <mpc5xxx.h> - -#define OHCI_USE_NPS /* force NoPowerSwitching mode */ -#undef OHCI_VERBOSE_DEBUG /* not always helpful */ -#undef DEBUG -#undef SHOW_INFO -#undef OHCI_FILL_TRACE - -/* For initializing controller (mask in an HCFS mode too) */ -#define OHCI_CONTROL_INIT \ - (OHCI_CTRL_CBSR & 0x3) | OHCI_CTRL_IE | OHCI_CTRL_PLE - -#define readl(a) (*((volatile u32 *)(a))) -#define writel(a, b) (*((volatile u32 *)(b)) = ((volatile u32)a)) - -#ifdef DEBUG -#define dbg(format, arg...) printf("DEBUG: " format "\n", ## arg) -#else -#define dbg(format, arg...) do {} while(0) -#endif /* DEBUG */ -#define err(format, arg...) printf("ERROR: " format "\n", ## arg) -#ifdef SHOW_INFO -#define info(format, arg...) printf("INFO: " format "\n", ## arg) -#else -#define info(format, arg...) do {} while(0) -#endif - -#define m16_swap(x) swap_16(x) -#define m32_swap(x) swap_32(x) - -#define ohci_cpu_to_le16(x) (x) -#define ohci_cpu_to_le32(x) (x) - -/* global ohci_t */ -static ohci_t gohci; -/* this must be aligned to a 256 byte boundary */ -struct ohci_hcca ghcca[1]; -/* a pointer to the aligned storage */ -struct ohci_hcca *phcca; -/* this allocates EDs for all possible endpoints */ -struct ohci_device ohci_dev; -/* urb_priv */ -urb_priv_t urb_priv; -/* RHSC flag */ -int got_rhsc; -/* device which was disconnected */ -struct usb_device *devgone; -/* flag guarding URB transation */ -int urb_finished = 0; - -/*-------------------------------------------------------------------------*/ - -/* AMD-756 (D2 rev) reports corrupt register contents in some cases. - * The erratum (#4) description is incorrect. AMD's workaround waits - * till some bits (mostly reserved) are clear; ok for all revs. - */ -#define OHCI_QUIRK_AMD756 0xabcd -#define read_roothub(hc, register, mask) ({ \ - u32 temp = readl (&hc->regs->roothub.register); \ - if (hc->flags & OHCI_QUIRK_AMD756) \ - while (temp & mask) \ - temp = readl (&hc->regs->roothub.register); \ - temp; }) - -static u32 roothub_a (struct ohci *hc) - { return read_roothub (hc, a, 0xfc0fe000); } -static inline u32 roothub_b (struct ohci *hc) - { return readl (&hc->regs->roothub.b); } -static inline u32 roothub_status (struct ohci *hc) - { return readl (&hc->regs->roothub.status); } -static u32 roothub_portstatus (struct ohci *hc, int i) - { return read_roothub (hc, portstatus [i], 0xffe0fce0); } - - -/* forward declaration */ -static int hc_interrupt (void); -static void -td_submit_job (struct usb_device * dev, unsigned long pipe, void * buffer, - int transfer_len, struct devrequest * setup, urb_priv_t * urb, int interval); - -/*-------------------------------------------------------------------------* - * URB support functions - *-------------------------------------------------------------------------*/ - -/* free HCD-private data associated with this URB */ - -static void urb_free_priv (urb_priv_t * urb) -{ - int i; - int last; - struct td * td; - - last = urb->length - 1; - if (last >= 0) { - for (i = 0; i <= last; i++) { - td = urb->td[i]; - if (td) { - td->usb_dev = NULL; - urb->td[i] = NULL; - } - } - } -} - -/*-------------------------------------------------------------------------*/ - -#ifdef DEBUG -static int sohci_get_current_frame_number (struct usb_device * dev); - -/* debug| print the main components of an URB - * small: 0) header + data packets 1) just header */ - -static void pkt_print (struct usb_device * dev, unsigned long pipe, void * buffer, - int transfer_len, struct devrequest * setup, char * str, int small) -{ - urb_priv_t * purb = &urb_priv; - - dbg("%s URB:[%4x] dev:%2d,ep:%2d-%c,type:%s,len:%d/%d stat:%#lx", - str, - sohci_get_current_frame_number (dev), - usb_pipedevice (pipe), - usb_pipeendpoint (pipe), - usb_pipeout (pipe)? 'O': 'I', - usb_pipetype (pipe) < 2? (usb_pipeint (pipe)? "INTR": "ISOC"): - (usb_pipecontrol (pipe)? "CTRL": "BULK"), - purb->actual_length, - transfer_len, dev->status); -#ifdef OHCI_VERBOSE_DEBUG - if (!small) { - int i, len; - - if (usb_pipecontrol (pipe)) { - printf (__FILE__ ": cmd(8):"); - for (i = 0; i < 8 ; i++) - printf (" %02x", ((__u8 *) setup) [i]); - printf ("\n"); - } - if (transfer_len > 0 && buffer) { - printf (__FILE__ ": data(%d/%d):", - purb->actual_length, - transfer_len); - len = usb_pipeout (pipe)? - transfer_len: purb->actual_length; - for (i = 0; i < 16 && i < len; i++) - printf (" %02x", ((__u8 *) buffer) [i]); - printf ("%s\n", i < len? "...": ""); - } - } -#endif -} - -/* just for debugging; prints non-empty branches of the int ed tree inclusive iso eds*/ -void ep_print_int_eds (ohci_t *ohci, char * str) { - int i, j; - __u32 * ed_p; - for (i= 0; i < 32; i++) { - j = 5; - ed_p = &(ohci->hcca->int_table [i]); - if (*ed_p == 0) - continue; - printf (__FILE__ ": %s branch int %2d(%2x):", str, i, i); - while (*ed_p != 0 && j--) { - ed_t *ed = (ed_t *)ohci_cpu_to_le32(ed_p); - printf (" ed: %4x;", ed->hwINFO); - ed_p = &ed->hwNextED; - } - printf ("\n"); - } -} - -static void ohci_dump_intr_mask (char *label, __u32 mask) -{ - dbg ("%s: 0x%08x%s%s%s%s%s%s%s%s%s", - label, - mask, - (mask & OHCI_INTR_MIE) ? " MIE" : "", - (mask & OHCI_INTR_OC) ? " OC" : "", - (mask & OHCI_INTR_RHSC) ? " RHSC" : "", - (mask & OHCI_INTR_FNO) ? " FNO" : "", - (mask & OHCI_INTR_UE) ? " UE" : "", - (mask & OHCI_INTR_RD) ? " RD" : "", - (mask & OHCI_INTR_SF) ? " SF" : "", - (mask & OHCI_INTR_WDH) ? " WDH" : "", - (mask & OHCI_INTR_SO) ? " SO" : "" - ); -} - -static void maybe_print_eds (char *label, __u32 value) -{ - ed_t *edp = (ed_t *)value; - - if (value) { - dbg ("%s %08x", label, value); - dbg ("%08x", edp->hwINFO); - dbg ("%08x", edp->hwTailP); - dbg ("%08x", edp->hwHeadP); - dbg ("%08x", edp->hwNextED); - } -} - -static char * hcfs2string (int state) -{ - switch (state) { - case OHCI_USB_RESET: return "reset"; - case OHCI_USB_RESUME: return "resume"; - case OHCI_USB_OPER: return "operational"; - case OHCI_USB_SUSPEND: return "suspend"; - } - return "?"; -} - -/* dump control and status registers */ -static void ohci_dump_status (ohci_t *controller) -{ - struct ohci_regs *regs = controller->regs; - __u32 temp; - - temp = readl (®s->revision) & 0xff; - if (temp != 0x10) - dbg ("spec %d.%d", (temp >> 4), (temp & 0x0f)); - - temp = readl (®s->control); - dbg ("control: 0x%08x%s%s%s HCFS=%s%s%s%s%s CBSR=%d", temp, - (temp & OHCI_CTRL_RWE) ? " RWE" : "", - (temp & OHCI_CTRL_RWC) ? " RWC" : "", - (temp & OHCI_CTRL_IR) ? " IR" : "", - hcfs2string (temp & OHCI_CTRL_HCFS), - (temp & OHCI_CTRL_BLE) ? " BLE" : "", - (temp & OHCI_CTRL_CLE) ? " CLE" : "", - (temp & OHCI_CTRL_IE) ? " IE" : "", - (temp & OHCI_CTRL_PLE) ? " PLE" : "", - temp & OHCI_CTRL_CBSR - ); - - temp = readl (®s->cmdstatus); - dbg ("cmdstatus: 0x%08x SOC=%d%s%s%s%s", temp, - (temp & OHCI_SOC) >> 16, - (temp & OHCI_OCR) ? " OCR" : "", - (temp & OHCI_BLF) ? " BLF" : "", - (temp & OHCI_CLF) ? " CLF" : "", - (temp & OHCI_HCR) ? " HCR" : "" - ); - - ohci_dump_intr_mask ("intrstatus", readl (®s->intrstatus)); - ohci_dump_intr_mask ("intrenable", readl (®s->intrenable)); - - maybe_print_eds ("ed_periodcurrent", readl (®s->ed_periodcurrent)); - - maybe_print_eds ("ed_controlhead", readl (®s->ed_controlhead)); - maybe_print_eds ("ed_controlcurrent", readl (®s->ed_controlcurrent)); - - maybe_print_eds ("ed_bulkhead", readl (®s->ed_bulkhead)); - maybe_print_eds ("ed_bulkcurrent", readl (®s->ed_bulkcurrent)); - - maybe_print_eds ("donehead", readl (®s->donehead)); -} - -static void ohci_dump_roothub (ohci_t *controller, int verbose) -{ - __u32 temp, ndp, i; - - temp = roothub_a (controller); - ndp = (temp & RH_A_NDP); - - if (verbose) { - dbg ("roothub.a: %08x POTPGT=%d%s%s%s%s%s NDP=%d", temp, - ((temp & RH_A_POTPGT) >> 24) & 0xff, - (temp & RH_A_NOCP) ? " NOCP" : "", - (temp & RH_A_OCPM) ? " OCPM" : "", - (temp & RH_A_DT) ? " DT" : "", - (temp & RH_A_NPS) ? " NPS" : "", - (temp & RH_A_PSM) ? " PSM" : "", - ndp - ); - temp = roothub_b (controller); - dbg ("roothub.b: %08x PPCM=%04x DR=%04x", - temp, - (temp & RH_B_PPCM) >> 16, - (temp & RH_B_DR) - ); - temp = roothub_status (controller); - dbg ("roothub.status: %08x%s%s%s%s%s%s", - temp, - (temp & RH_HS_CRWE) ? " CRWE" : "", - (temp & RH_HS_OCIC) ? " OCIC" : "", - (temp & RH_HS_LPSC) ? " LPSC" : "", - (temp & RH_HS_DRWE) ? " DRWE" : "", - (temp & RH_HS_OCI) ? " OCI" : "", - (temp & RH_HS_LPS) ? " LPS" : "" - ); - } - - for (i = 0; i < ndp; i++) { - temp = roothub_portstatus (controller, i); - dbg ("roothub.portstatus [%d] = 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s", - i, - temp, - (temp & RH_PS_PRSC) ? " PRSC" : "", - (temp & RH_PS_OCIC) ? " OCIC" : "", - (temp & RH_PS_PSSC) ? " PSSC" : "", - (temp & RH_PS_PESC) ? " PESC" : "", - (temp & RH_PS_CSC) ? " CSC" : "", - - (temp & RH_PS_LSDA) ? " LSDA" : "", - (temp & RH_PS_PPS) ? " PPS" : "", - (temp & RH_PS_PRS) ? " PRS" : "", - (temp & RH_PS_POCI) ? " POCI" : "", - (temp & RH_PS_PSS) ? " PSS" : "", - - (temp & RH_PS_PES) ? " PES" : "", - (temp & RH_PS_CCS) ? " CCS" : "" - ); - } -} - -static void ohci_dump (ohci_t *controller, int verbose) -{ - dbg ("OHCI controller usb-%s state", controller->slot_name); - - /* dumps some of the state we know about */ - ohci_dump_status (controller); - if (verbose) - ep_print_int_eds (controller, "hcca"); - dbg ("hcca frame #%04x", controller->hcca->frame_no); - ohci_dump_roothub (controller, 1); -} - - -#endif /* DEBUG */ - -/*-------------------------------------------------------------------------* - * Interface functions (URB) - *-------------------------------------------------------------------------*/ - -/* get a transfer request */ - -int sohci_submit_job(struct usb_device *dev, unsigned long pipe, void *buffer, - int transfer_len, struct devrequest *setup, int interval) -{ - ohci_t *ohci; - ed_t * ed; - urb_priv_t *purb_priv; - int i, size = 0; - - ohci = &gohci; - - /* when controller's hung, permit only roothub cleanup attempts - * such as powering down ports */ - if (ohci->disabled) { - err("sohci_submit_job: EPIPE"); - return -1; - } - - /* if we have an unfinished URB from previous transaction let's - * fail and scream as quickly as possible so as not to corrupt - * further communication */ - if (!urb_finished) { - err("sohci_submit_job: URB NOT FINISHED"); - return -1; - } - /* we're about to begin a new transaction here so mark the URB unfinished */ - urb_finished = 0; - - /* every endpoint has a ed, locate and fill it */ - if (!(ed = ep_add_ed (dev, pipe))) { - err("sohci_submit_job: ENOMEM"); - return -1; - } - - /* for the private part of the URB we need the number of TDs (size) */ - switch (usb_pipetype (pipe)) { - case PIPE_BULK: /* one TD for every 4096 Byte */ - size = (transfer_len - 1) / 4096 + 1; - break; - case PIPE_CONTROL: /* 1 TD for setup, 1 for ACK and 1 for every 4096 B */ - size = (transfer_len == 0)? 2: - (transfer_len - 1) / 4096 + 3; - break; - } - - if (size >= (N_URB_TD - 1)) { - err("need %d TDs, only have %d", size, N_URB_TD); - return -1; - } - purb_priv = &urb_priv; - purb_priv->pipe = pipe; - - /* fill the private part of the URB */ - purb_priv->length = size; - purb_priv->ed = ed; - purb_priv->actual_length = 0; - - /* allocate the TDs */ - /* note that td[0] was allocated in ep_add_ed */ - for (i = 0; i < size; i++) { - purb_priv->td[i] = td_alloc (dev); - if (!purb_priv->td[i]) { - purb_priv->length = i; - urb_free_priv (purb_priv); - err("sohci_submit_job: ENOMEM"); - return -1; - } - } - - if (ed->state == ED_NEW || (ed->state & ED_DEL)) { - urb_free_priv (purb_priv); - err("sohci_submit_job: EINVAL"); - return -1; - } - - /* link the ed into a chain if is not already */ - if (ed->state != ED_OPER) - ep_link (ohci, ed); - - /* fill the TDs and link it to the ed */ - td_submit_job(dev, pipe, buffer, transfer_len, setup, purb_priv, interval); - - return 0; -} - -/*-------------------------------------------------------------------------*/ - -#ifdef DEBUG -/* tell us the current USB frame number */ - -static int sohci_get_current_frame_number (struct usb_device *usb_dev) -{ - ohci_t *ohci = &gohci; - - return ohci_cpu_to_le16 (ohci->hcca->frame_no); -} -#endif - -/*-------------------------------------------------------------------------* - * ED handling functions - *-------------------------------------------------------------------------*/ - -/* link an ed into one of the HC chains */ - -static int ep_link (ohci_t *ohci, ed_t *edi) -{ - volatile ed_t *ed = edi; - - ed->state = ED_OPER; - - switch (ed->type) { - case PIPE_CONTROL: - ed->hwNextED = 0; - if (ohci->ed_controltail == NULL) { - writel (ed, &ohci->regs->ed_controlhead); - } else { - ohci->ed_controltail->hwNextED = ohci_cpu_to_le32 ((unsigned long)ed); - } - ed->ed_prev = ohci->ed_controltail; - if (!ohci->ed_controltail && !ohci->ed_rm_list[0] && - !ohci->ed_rm_list[1] && !ohci->sleeping) { - ohci->hc_control |= OHCI_CTRL_CLE; - writel (ohci->hc_control, &ohci->regs->control); - } - ohci->ed_controltail = edi; - break; - - case PIPE_BULK: - ed->hwNextED = 0; - if (ohci->ed_bulktail == NULL) { - writel (ed, &ohci->regs->ed_bulkhead); - } else { - ohci->ed_bulktail->hwNextED = ohci_cpu_to_le32 ((unsigned long)ed); - } - ed->ed_prev = ohci->ed_bulktail; - if (!ohci->ed_bulktail && !ohci->ed_rm_list[0] && - !ohci->ed_rm_list[1] && !ohci->sleeping) { - ohci->hc_control |= OHCI_CTRL_BLE; - writel (ohci->hc_control, &ohci->regs->control); - } - ohci->ed_bulktail = edi; - break; - } - return 0; -} - -/*-------------------------------------------------------------------------*/ - -/* unlink an ed from one of the HC chains. - * just the link to the ed is unlinked. - * the link from the ed still points to another operational ed or 0 - * so the HC can eventually finish the processing of the unlinked ed */ - -static int ep_unlink (ohci_t *ohci, ed_t *edi) -{ - volatile ed_t *ed = edi; - - ed->hwINFO |= ohci_cpu_to_le32 (OHCI_ED_SKIP); - - switch (ed->type) { - case PIPE_CONTROL: - if (ed->ed_prev == NULL) { - if (!ed->hwNextED) { - ohci->hc_control &= ~OHCI_CTRL_CLE; - writel (ohci->hc_control, &ohci->regs->control); - } - writel (ohci_cpu_to_le32 (*((__u32 *)&ed->hwNextED)), &ohci->regs->ed_controlhead); - } else { - ed->ed_prev->hwNextED = ed->hwNextED; - } - if (ohci->ed_controltail == ed) { - ohci->ed_controltail = ed->ed_prev; - } else { - ((ed_t *)ohci_cpu_to_le32 (*((__u32 *)&ed->hwNextED)))->ed_prev = ed->ed_prev; - } - break; - - case PIPE_BULK: - if (ed->ed_prev == NULL) { - if (!ed->hwNextED) { - ohci->hc_control &= ~OHCI_CTRL_BLE; - writel (ohci->hc_control, &ohci->regs->control); - } - writel (ohci_cpu_to_le32 (*((__u32 *)&ed->hwNextED)), &ohci->regs->ed_bulkhead); - } else { - ed->ed_prev->hwNextED = ed->hwNextED; - } - if (ohci->ed_bulktail == ed) { - ohci->ed_bulktail = ed->ed_prev; - } else { - ((ed_t *)ohci_cpu_to_le32 (*((__u32 *)&ed->hwNextED)))->ed_prev = ed->ed_prev; - } - break; - } - ed->state = ED_UNLINK; - return 0; -} - - -/*-------------------------------------------------------------------------*/ - -/* add/reinit an endpoint; this should be done once at the usb_set_configuration command, - * but the USB stack is a little bit stateless so we do it at every transaction - * if the state of the ed is ED_NEW then a dummy td is added and the state is changed to ED_UNLINK - * in all other cases the state is left unchanged - * the ed info fields are setted anyway even though most of them should not change */ - -static ed_t * ep_add_ed (struct usb_device *usb_dev, unsigned long pipe) -{ - td_t *td; - ed_t *ed_ret; - volatile ed_t *ed; - - ed = ed_ret = &ohci_dev.ed[(usb_pipeendpoint (pipe) << 1) | - (usb_pipecontrol (pipe)? 0: usb_pipeout (pipe))]; - - if ((ed->state & ED_DEL) || (ed->state & ED_URB_DEL)) { - err("ep_add_ed: pending delete"); - /* pending delete request */ - return NULL; - } - - if (ed->state == ED_NEW) { - ed->hwINFO = ohci_cpu_to_le32 (OHCI_ED_SKIP); /* skip ed */ - /* dummy td; end of td list for ed */ - td = td_alloc (usb_dev); - ed->hwTailP = ohci_cpu_to_le32 ((unsigned long)td); - ed->hwHeadP = ed->hwTailP; - ed->state = ED_UNLINK; - ed->type = usb_pipetype (pipe); - ohci_dev.ed_cnt++; - } - - ed->hwINFO = ohci_cpu_to_le32 (usb_pipedevice (pipe) - | usb_pipeendpoint (pipe) << 7 - | (usb_pipeisoc (pipe)? 0x8000: 0) - | (usb_pipecontrol (pipe)? 0: (usb_pipeout (pipe)? 0x800: 0x1000)) - | (usb_dev->speed == USB_SPEED_LOW) << 13 - | usb_maxpacket (usb_dev, pipe) << 16); - - return ed_ret; -} - -/*-------------------------------------------------------------------------* - * TD handling functions - *-------------------------------------------------------------------------*/ - -/* enqueue next TD for this URB (OHCI spec 5.2.8.2) */ - -static void td_fill (ohci_t *ohci, unsigned int info, - void *data, int len, - struct usb_device *dev, int index, urb_priv_t *urb_priv) -{ - volatile td_t *td, *td_pt; -#ifdef OHCI_FILL_TRACE - int i; -#endif - - if (index > urb_priv->length) { - err("index > length"); - return; - } - /* use this td as the next dummy */ - td_pt = urb_priv->td [index]; - td_pt->hwNextTD = 0; - - /* fill the old dummy TD */ - td = urb_priv->td [index] = (td_t *)(ohci_cpu_to_le32 (urb_priv->ed->hwTailP) & ~0xf); - - td->ed = urb_priv->ed; - td->next_dl_td = NULL; - td->index = index; - td->data = (__u32)data; -#ifdef OHCI_FILL_TRACE - if (usb_pipebulk(urb_priv->pipe) && usb_pipeout(urb_priv->pipe)) { - for (i = 0; i < len; i++) - printf("td->data[%d] %#2x ",i, ((unsigned char *)td->data)[i]); - printf("\n"); - } -#endif - if (!len) - data = 0; - - td->hwINFO = ohci_cpu_to_le32 (info); - td->hwCBP = ohci_cpu_to_le32 ((unsigned long)data); - if (data) - td->hwBE = ohci_cpu_to_le32 ((unsigned long)(data + len - 1)); - else - td->hwBE = 0; - td->hwNextTD = ohci_cpu_to_le32 ((unsigned long)td_pt); - - /* append to queue */ - td->ed->hwTailP = td->hwNextTD; -} - -/*-------------------------------------------------------------------------*/ - -/* prepare all TDs of a transfer */ -static void td_submit_job (struct usb_device *dev, unsigned long pipe, void *buffer, - int transfer_len, struct devrequest *setup, urb_priv_t *urb, int interval) -{ - ohci_t *ohci = &gohci; - int data_len = transfer_len; - void *data; - int cnt = 0; - __u32 info = 0; - unsigned int toggle = 0; - - /* OHCI handles the DATA-toggles itself, we just use the - USB-toggle bits for resetting */ - if(usb_gettoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe))) { - toggle = TD_T_TOGGLE; - } else { - toggle = TD_T_DATA0; - usb_settoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe), 1); - } - urb->td_cnt = 0; - if (data_len) - data = buffer; - else - data = 0; - - switch (usb_pipetype (pipe)) { - case PIPE_BULK: - info = usb_pipeout (pipe)? - TD_CC | TD_DP_OUT : TD_CC | TD_DP_IN ; - while(data_len > 4096) { - td_fill (ohci, info | (cnt? TD_T_TOGGLE:toggle), data, 4096, dev, cnt, urb); - data += 4096; data_len -= 4096; cnt++; - } - info = usb_pipeout (pipe)? - TD_CC | TD_DP_OUT : TD_CC | TD_R | TD_DP_IN ; - td_fill (ohci, info | (cnt? TD_T_TOGGLE:toggle), data, data_len, dev, cnt, urb); - cnt++; - - if (!ohci->sleeping) - writel (OHCI_BLF, &ohci->regs->cmdstatus); /* start bulk list */ - break; - - case PIPE_CONTROL: - info = TD_CC | TD_DP_SETUP | TD_T_DATA0; - td_fill (ohci, info, setup, 8, dev, cnt++, urb); - if (data_len > 0) { - info = usb_pipeout (pipe)? - TD_CC | TD_R | TD_DP_OUT | TD_T_DATA1 : TD_CC | TD_R | TD_DP_IN | TD_T_DATA1; - /* NOTE: mishandles transfers >8K, some >4K */ - td_fill (ohci, info, data, data_len, dev, cnt++, urb); - } - info = usb_pipeout (pipe)? - TD_CC | TD_DP_IN | TD_T_DATA1: TD_CC | TD_DP_OUT | TD_T_DATA1; - td_fill (ohci, info, data, 0, dev, cnt++, urb); - if (!ohci->sleeping) - writel (OHCI_CLF, &ohci->regs->cmdstatus); /* start Control list */ - break; - } - if (urb->length != cnt) - dbg("TD LENGTH %d != CNT %d", urb->length, cnt); -} - -/*-------------------------------------------------------------------------* - * Done List handling functions - *-------------------------------------------------------------------------*/ - - -/* calculate the transfer length and update the urb */ - -static void dl_transfer_length(td_t * td) -{ - __u32 tdBE, tdCBP; - urb_priv_t *lurb_priv = &urb_priv; - - tdBE = ohci_cpu_to_le32 (td->hwBE); - tdCBP = ohci_cpu_to_le32 (td->hwCBP); - - - if (!(usb_pipecontrol(lurb_priv->pipe) && - ((td->index == 0) || (td->index == lurb_priv->length - 1)))) { - if (tdBE != 0) { - if (td->hwCBP == 0) - lurb_priv->actual_length += tdBE - td->data + 1; - else - lurb_priv->actual_length += tdCBP - td->data; - } - } -} - -/*-------------------------------------------------------------------------*/ - -/* replies to the request have to be on a FIFO basis so - * we reverse the reversed done-list */ - -static td_t * dl_reverse_done_list (ohci_t *ohci) -{ - __u32 td_list_hc; - td_t *td_rev = NULL; - td_t *td_list = NULL; - urb_priv_t *lurb_priv = NULL; - - td_list_hc = ohci_cpu_to_le32 (ohci->hcca->done_head) & 0xfffffff0; - ohci->hcca->done_head = 0; - - while (td_list_hc) { - td_list = (td_t *)td_list_hc; - - if (TD_CC_GET (ohci_cpu_to_le32 (td_list->hwINFO))) { - lurb_priv = &urb_priv; - dbg(" USB-error/status: %x : %p", - TD_CC_GET (ohci_cpu_to_le32 (td_list->hwINFO)), td_list); - if (td_list->ed->hwHeadP & ohci_cpu_to_le32 (0x1)) { - if (lurb_priv && ((td_list->index + 1) < lurb_priv->length)) { - td_list->ed->hwHeadP = - (lurb_priv->td[lurb_priv->length - 1]->hwNextTD & ohci_cpu_to_le32 (0xfffffff0)) | - (td_list->ed->hwHeadP & ohci_cpu_to_le32 (0x2)); - lurb_priv->td_cnt += lurb_priv->length - td_list->index - 1; - } else - td_list->ed->hwHeadP &= ohci_cpu_to_le32 (0xfffffff2); - } - td_list->hwNextTD = 0; - } - - td_list->next_dl_td = td_rev; - td_rev = td_list; - td_list_hc = ohci_cpu_to_le32 (td_list->hwNextTD) & 0xfffffff0; - } - return td_list; -} - -/*-------------------------------------------------------------------------*/ - -/* td done list */ -static int dl_done_list (ohci_t *ohci, td_t *td_list) -{ - td_t *td_list_next = NULL; - ed_t *ed; - int cc = 0; - int stat = 0; - /* urb_t *urb; */ - urb_priv_t *lurb_priv; - __u32 tdINFO, edHeadP, edTailP; - - while (td_list) { - td_list_next = td_list->next_dl_td; - - lurb_priv = &urb_priv; - tdINFO = ohci_cpu_to_le32 (td_list->hwINFO); - - ed = td_list->ed; - - dl_transfer_length(td_list); - - /* error code of transfer */ - cc = TD_CC_GET (tdINFO); - if (++(lurb_priv->td_cnt) == lurb_priv->length) { - if ((ed->state & (ED_OPER | ED_UNLINK)) - && (lurb_priv->state != URB_DEL)) { - dbg("ConditionCode %#x", cc); - stat = cc_to_error[cc]; - urb_finished = 1; - } - } - - if (ed->state != ED_NEW) { - edHeadP = ohci_cpu_to_le32 (ed->hwHeadP) & 0xfffffff0; - edTailP = ohci_cpu_to_le32 (ed->hwTailP); - - /* unlink eds if they are not busy */ - if ((edHeadP == edTailP) && (ed->state == ED_OPER)) - ep_unlink (ohci, ed); - } - - td_list = td_list_next; - } - return stat; -} - -/*-------------------------------------------------------------------------* - * Virtual Root Hub - *-------------------------------------------------------------------------*/ - -#include <usbroothubdes.h> - -/* Hub class-specific descriptor is constructed dynamically */ - - -/*-------------------------------------------------------------------------*/ - -#define OK(x) len = (x); break -#ifdef DEBUG -#define WR_RH_STAT(x) {info("WR:status %#8x", (x));writel((x), &gohci.regs->roothub.status);} -#define WR_RH_PORTSTAT(x) {info("WR:portstatus[%d] %#8x", wIndex-1, (x));writel((x), &gohci.regs->roothub.portstatus[wIndex-1]);} -#else -#define WR_RH_STAT(x) writel((x), &gohci.regs->roothub.status) -#define WR_RH_PORTSTAT(x) writel((x), &gohci.regs->roothub.portstatus[wIndex-1]) -#endif -#define RD_RH_STAT roothub_status(&gohci) -#define RD_RH_PORTSTAT roothub_portstatus(&gohci,wIndex-1) - -/* request to virtual root hub */ - -int rh_check_port_status(ohci_t *controller) -{ - __u32 temp, ndp, i; - int res; - - res = -1; - temp = roothub_a (controller); - ndp = (temp & RH_A_NDP); - for (i = 0; i < ndp; i++) { - temp = roothub_portstatus (controller, i); - /* check for a device disconnect */ - if (((temp & (RH_PS_PESC | RH_PS_CSC)) == - (RH_PS_PESC | RH_PS_CSC)) && - ((temp & RH_PS_CCS) == 0)) { - res = i; - break; - } - } - return res; -} - -static int ohci_submit_rh_msg(struct usb_device *dev, unsigned long pipe, - void *buffer, int transfer_len, struct devrequest *cmd) -{ - void * data = buffer; - int leni = transfer_len; - int len = 0; - int stat = 0; - __u32 datab[4]; - __u8 *data_buf = (__u8 *)datab; - __u16 bmRType_bReq; - __u16 wValue; - __u16 wIndex; - __u16 wLength; - -#ifdef DEBUG -urb_priv.actual_length = 0; -pkt_print(dev, pipe, buffer, transfer_len, cmd, "SUB(rh)", usb_pipein(pipe)); -#endif - if (usb_pipeint(pipe)) { - info("Root-Hub submit IRQ: NOT implemented"); - return 0; - } - - bmRType_bReq = cmd->requesttype | (cmd->request << 8); - wValue = m16_swap (cmd->value); - wIndex = m16_swap (cmd->index); - wLength = m16_swap (cmd->length); - - info("Root-Hub: adr: %2x cmd(%1x): %08x %04x %04x %04x", - dev->devnum, 8, bmRType_bReq, wValue, wIndex, wLength); - - switch (bmRType_bReq) { - /* Request Destination: - without flags: Device, - RH_INTERFACE: interface, - RH_ENDPOINT: endpoint, - RH_CLASS means HUB here, - RH_OTHER | RH_CLASS almost ever means HUB_PORT here - */ - - case RH_GET_STATUS: - *(__u16 *) data_buf = m16_swap (1); OK (2); - case RH_GET_STATUS | RH_INTERFACE: - *(__u16 *) data_buf = m16_swap (0); OK (2); - case RH_GET_STATUS | RH_ENDPOINT: - *(__u16 *) data_buf = m16_swap (0); OK (2); - case RH_GET_STATUS | RH_CLASS: - *(__u32 *) data_buf = m32_swap ( - RD_RH_STAT & ~(RH_HS_CRWE | RH_HS_DRWE)); - OK (4); - case RH_GET_STATUS | RH_OTHER | RH_CLASS: - *(__u32 *) data_buf = m32_swap (RD_RH_PORTSTAT); OK (4); - - case RH_CLEAR_FEATURE | RH_ENDPOINT: - switch (wValue) { - case (RH_ENDPOINT_STALL): OK (0); - } - break; - - case RH_CLEAR_FEATURE | RH_CLASS: - switch (wValue) { - case RH_C_HUB_LOCAL_POWER: - OK(0); - case (RH_C_HUB_OVER_CURRENT): - WR_RH_STAT(RH_HS_OCIC); OK (0); - } - break; - - case RH_CLEAR_FEATURE | RH_OTHER | RH_CLASS: - switch (wValue) { - case (RH_PORT_ENABLE): - WR_RH_PORTSTAT (RH_PS_CCS ); OK (0); - case (RH_PORT_SUSPEND): - WR_RH_PORTSTAT (RH_PS_POCI); OK (0); - case (RH_PORT_POWER): - WR_RH_PORTSTAT (RH_PS_LSDA); OK (0); - case (RH_C_PORT_CONNECTION): - WR_RH_PORTSTAT (RH_PS_CSC ); OK (0); - case (RH_C_PORT_ENABLE): - WR_RH_PORTSTAT (RH_PS_PESC); OK (0); - case (RH_C_PORT_SUSPEND): - WR_RH_PORTSTAT (RH_PS_PSSC); OK (0); - case (RH_C_PORT_OVER_CURRENT): - WR_RH_PORTSTAT (RH_PS_OCIC); OK (0); - case (RH_C_PORT_RESET): - WR_RH_PORTSTAT (RH_PS_PRSC); OK (0); - } - break; - - case RH_SET_FEATURE | RH_OTHER | RH_CLASS: - switch (wValue) { - case (RH_PORT_SUSPEND): - WR_RH_PORTSTAT (RH_PS_PSS ); OK (0); - case (RH_PORT_RESET): /* BUG IN HUP CODE *********/ - if (RD_RH_PORTSTAT & RH_PS_CCS) - WR_RH_PORTSTAT (RH_PS_PRS); - OK (0); - case (RH_PORT_POWER): - WR_RH_PORTSTAT (RH_PS_PPS ); OK (0); - case (RH_PORT_ENABLE): /* BUG IN HUP CODE *********/ - if (RD_RH_PORTSTAT & RH_PS_CCS) - WR_RH_PORTSTAT (RH_PS_PES ); - OK (0); - } - break; - - case RH_SET_ADDRESS: gohci.rh.devnum = wValue; OK(0); - - case RH_GET_DESCRIPTOR: - switch ((wValue & 0xff00) >> 8) { - case (0x01): /* device descriptor */ - len = min_t(unsigned int, - leni, - min_t(unsigned int, - sizeof (root_hub_dev_des), - wLength)); - data_buf = root_hub_dev_des; OK(len); - case (0x02): /* configuration descriptor */ - len = min_t(unsigned int, - leni, - min_t(unsigned int, - sizeof (root_hub_config_des), - wLength)); - data_buf = root_hub_config_des; OK(len); - case (0x03): /* string descriptors */ - if(wValue==0x0300) { - len = min_t(unsigned int, - leni, - min_t(unsigned int, - sizeof (root_hub_str_index0), - wLength)); - data_buf = root_hub_str_index0; - OK(len); - } - if(wValue==0x0301) { - len = min_t(unsigned int, - leni, - min_t(unsigned int, - sizeof (root_hub_str_index1), - wLength)); - data_buf = root_hub_str_index1; - OK(len); - } - default: - stat = USB_ST_STALLED; - } - break; - - case RH_GET_DESCRIPTOR | RH_CLASS: - { - __u32 temp = roothub_a (&gohci); - - data_buf [0] = 9; /* min length; */ - data_buf [1] = 0x29; - data_buf [2] = temp & RH_A_NDP; - data_buf [3] = 0; - if (temp & RH_A_PSM) /* per-port power switching? */ - data_buf [3] |= 0x1; - if (temp & RH_A_NOCP) /* no overcurrent reporting? */ - data_buf [3] |= 0x10; - else if (temp & RH_A_OCPM) /* per-port overcurrent reporting? */ - data_buf [3] |= 0x8; - - /* corresponds to data_buf[4-7] */ - datab [1] = 0; - data_buf [5] = (temp & RH_A_POTPGT) >> 24; - temp = roothub_b (&gohci); - data_buf [7] = temp & RH_B_DR; - if (data_buf [2] < 7) { - data_buf [8] = 0xff; - } else { - data_buf [0] += 2; - data_buf [8] = (temp & RH_B_DR) >> 8; - data_buf [10] = data_buf [9] = 0xff; - } - - len = min_t(unsigned int, leni, - min_t(unsigned int, data_buf [0], wLength)); - OK (len); - } - - case RH_GET_CONFIGURATION: *(__u8 *) data_buf = 0x01; OK (1); - - case RH_SET_CONFIGURATION: WR_RH_STAT (0x10000); OK (0); - - default: - dbg ("unsupported root hub command"); - stat = USB_ST_STALLED; - } - -#ifdef DEBUG - ohci_dump_roothub (&gohci, 1); -#endif - - len = min_t(int, len, leni); - if (data != data_buf) - memcpy (data, data_buf, len); - dev->act_len = len; - dev->status = stat; - -#ifdef DEBUG - if (transfer_len) - urb_priv.actual_length = transfer_len; - pkt_print(dev, pipe, buffer, transfer_len, cmd, "RET(rh)", 0/*usb_pipein(pipe)*/); -#endif - - return stat; -} - -/*-------------------------------------------------------------------------*/ - -/* common code for handling submit messages - used for all but root hub */ -/* accesses. */ -int submit_common_msg(struct usb_device *dev, unsigned long pipe, void *buffer, - int transfer_len, struct devrequest *setup, int interval) -{ - int stat = 0; - int maxsize = usb_maxpacket(dev, pipe); - int timeout; - - /* device pulled? Shortcut the action. */ - if (devgone == dev) { - dev->status = USB_ST_CRC_ERR; - return 0; - } - -#ifdef DEBUG - urb_priv.actual_length = 0; - pkt_print(dev, pipe, buffer, transfer_len, setup, "SUB", usb_pipein(pipe)); -#endif - if (!maxsize) { - err("submit_common_message: pipesize for pipe %lx is zero", - pipe); - return -1; - } - - if (sohci_submit_job(dev, pipe, buffer, transfer_len, setup, interval) < 0) { - err("sohci_submit_job failed"); - return -1; - } - - /* allow more time for a BULK device to react - some are slow */ -#define BULK_TO 5000 /* timeout in milliseconds */ - if (usb_pipebulk(pipe)) - timeout = BULK_TO; - else - timeout = 100; - - /* wait for it to complete */ - for (;;) { - /* check whether the controller is done */ - stat = hc_interrupt(); - if (stat < 0) { - stat = USB_ST_CRC_ERR; - break; - } - - /* NOTE: since we are not interrupt driven in U-Boot and always - * handle only one URB at a time, we cannot assume the - * transaction finished on the first successful return from - * hc_interrupt().. unless the flag for current URB is set, - * meaning that all TD's to/from device got actually - * transferred and processed. If the current URB is not - * finished we need to re-iterate this loop so as - * hc_interrupt() gets called again as there needs to be some - * more TD's to process still */ - if ((stat >= 0) && (stat != 0xff) && (urb_finished)) { - /* 0xff is returned for an SF-interrupt */ - break; - } - - if (--timeout) { - mdelay(1); - if (!urb_finished) - dbg("%"); - - } else { - err("CTL:TIMEOUT "); - dbg("submit_common_msg: TO status %x\n", stat); - stat = USB_ST_CRC_ERR; - urb_finished = 1; - break; - } - } -#if 0 - /* we got an Root Hub Status Change interrupt */ - if (got_rhsc) { -#ifdef DEBUG - ohci_dump_roothub (&gohci, 1); -#endif - got_rhsc = 0; - /* abuse timeout */ - timeout = rh_check_port_status(&gohci); - if (timeout >= 0) { -#if 0 /* this does nothing useful, but leave it here in case that changes */ - /* the called routine adds 1 to the passed value */ - usb_hub_port_connect_change(gohci.rh.dev, timeout - 1); -#endif - /* - * XXX - * This is potentially dangerous because it assumes - * that only one device is ever plugged in! - */ - devgone = dev; - } - } -#endif - - dev->status = stat; - dev->act_len = transfer_len; - -#ifdef DEBUG - pkt_print(dev, pipe, buffer, transfer_len, setup, "RET(ctlr)", usb_pipein(pipe)); -#endif - - /* free TDs in urb_priv */ - urb_free_priv (&urb_priv); - return 0; -} - -/* submit routines called from usb.c */ -int submit_bulk_msg(struct usb_device *dev, unsigned long pipe, void *buffer, - int transfer_len) -{ - info("submit_bulk_msg"); - return submit_common_msg(dev, pipe, buffer, transfer_len, NULL, 0); -} - -int submit_control_msg(struct usb_device *dev, unsigned long pipe, void *buffer, - int transfer_len, struct devrequest *setup) -{ - int maxsize = usb_maxpacket(dev, pipe); - - info("submit_control_msg"); -#ifdef DEBUG - urb_priv.actual_length = 0; - pkt_print(dev, pipe, buffer, transfer_len, setup, "SUB", usb_pipein(pipe)); -#endif - if (!maxsize) { - err("submit_control_message: pipesize for pipe %lx is zero", - pipe); - return -1; - } - if (((pipe >> 8) & 0x7f) == gohci.rh.devnum) { - gohci.rh.dev = dev; - /* root hub - redirect */ - return ohci_submit_rh_msg(dev, pipe, buffer, transfer_len, - setup); - } - - return submit_common_msg(dev, pipe, buffer, transfer_len, setup, 0); -} - -int submit_int_msg(struct usb_device *dev, unsigned long pipe, void *buffer, - int transfer_len, int interval) -{ - info("submit_int_msg"); - return -1; -} - -/*-------------------------------------------------------------------------* - * HC functions - *-------------------------------------------------------------------------*/ - -/* reset the HC and BUS */ - -static int hc_reset (ohci_t *ohci) -{ - int timeout = 30; - int smm_timeout = 50; /* 0,5 sec */ - - if (readl (&ohci->regs->control) & OHCI_CTRL_IR) { /* SMM owns the HC */ - writel (OHCI_OCR, &ohci->regs->cmdstatus); /* request ownership */ - info("USB HC TakeOver from SMM"); - while (readl (&ohci->regs->control) & OHCI_CTRL_IR) { - mdelay (10); - if (--smm_timeout == 0) { - err("USB HC TakeOver failed!"); - return -1; - } - } - } - - /* Disable HC interrupts */ - writel (OHCI_INTR_MIE, &ohci->regs->intrdisable); - - dbg("USB HC reset_hc usb-%s: ctrl = 0x%X ;", - ohci->slot_name, - readl (&ohci->regs->control)); - - /* Reset USB (needed by some controllers) */ - ohci->hc_control = 0; - writel (ohci->hc_control, &ohci->regs->control); - - /* HC Reset requires max 10 us delay */ - writel (OHCI_HCR, &ohci->regs->cmdstatus); - while ((readl (&ohci->regs->cmdstatus) & OHCI_HCR) != 0) { - if (--timeout == 0) { - err("USB HC reset timed out!"); - return -1; - } - udelay (1); - } - return 0; -} - -/*-------------------------------------------------------------------------*/ - -/* Start an OHCI controller, set the BUS operational - * enable interrupts - * connect the virtual root hub */ - -static int hc_start (ohci_t * ohci) -{ - __u32 mask; - unsigned int fminterval; - - ohci->disabled = 1; - - /* Tell the controller where the control and bulk lists are - * The lists are empty now. */ - - writel (0, &ohci->regs->ed_controlhead); - writel (0, &ohci->regs->ed_bulkhead); - - writel ((__u32)ohci->hcca, &ohci->regs->hcca); /* a reset clears this */ - - fminterval = 0x2edf; - writel ((fminterval * 9) / 10, &ohci->regs->periodicstart); - fminterval |= ((((fminterval - 210) * 6) / 7) << 16); - writel (fminterval, &ohci->regs->fminterval); - writel (0x628, &ohci->regs->lsthresh); - - /* start controller operations */ - ohci->hc_control = OHCI_CONTROL_INIT | OHCI_USB_OPER; - ohci->disabled = 0; - writel (ohci->hc_control, &ohci->regs->control); - - /* disable all interrupts */ - mask = (OHCI_INTR_SO | OHCI_INTR_WDH | OHCI_INTR_SF | OHCI_INTR_RD | - OHCI_INTR_UE | OHCI_INTR_FNO | OHCI_INTR_RHSC | - OHCI_INTR_OC | OHCI_INTR_MIE); - writel (mask, &ohci->regs->intrdisable); - /* clear all interrupts */ - mask &= ~OHCI_INTR_MIE; - writel (mask, &ohci->regs->intrstatus); - /* Choose the interrupts we care about now - but w/o MIE */ - mask = OHCI_INTR_RHSC | OHCI_INTR_UE | OHCI_INTR_WDH | OHCI_INTR_SO; - writel (mask, &ohci->regs->intrenable); - -#ifdef OHCI_USE_NPS - /* required for AMD-756 and some Mac platforms */ - writel ((roothub_a (ohci) | RH_A_NPS) & ~RH_A_PSM, - &ohci->regs->roothub.a); - writel (RH_HS_LPSC, &ohci->regs->roothub.status); -#endif /* OHCI_USE_NPS */ - - /* POTPGT delay is bits 24-31, in 2 ms units. */ - mdelay ((roothub_a (ohci) >> 23) & 0x1fe); - - /* connect the virtual root hub */ - ohci->rh.devnum = 0; - - return 0; -} - -/*-------------------------------------------------------------------------*/ - -/* an interrupt happens */ - -static int -hc_interrupt (void) -{ - ohci_t *ohci = &gohci; - struct ohci_regs *regs = ohci->regs; - int ints; - int stat = -1; - - if ((ohci->hcca->done_head != 0) && - !(ohci_cpu_to_le32(ohci->hcca->done_head) & 0x01)) { - - ints = OHCI_INTR_WDH; - - } else if ((ints = readl (®s->intrstatus)) == ~(u32)0) { - ohci->disabled++; - err ("%s device removed!", ohci->slot_name); - return -1; - - } else if ((ints &= readl (®s->intrenable)) == 0) { - dbg("hc_interrupt: returning..\n"); - return 0xff; - } - - /* dbg("Interrupt: %x frame: %x", ints, le16_to_cpu (ohci->hcca->frame_no)); */ - - if (ints & OHCI_INTR_RHSC) { - got_rhsc = 1; - stat = 0xff; - } - - if (ints & OHCI_INTR_UE) { - ohci->disabled++; - err ("OHCI Unrecoverable Error, controller usb-%s disabled", - ohci->slot_name); - /* e.g. due to PCI Master/Target Abort */ - -#ifdef DEBUG - ohci_dump (ohci, 1); -#endif - /* FIXME: be optimistic, hope that bug won't repeat often. */ - /* Make some non-interrupt context restart the controller. */ - /* Count and limit the retries though; either hardware or */ - /* software errors can go forever... */ - hc_reset (ohci); - return -1; - } - - if (ints & OHCI_INTR_WDH) { - writel (OHCI_INTR_WDH, ®s->intrdisable); - stat = dl_done_list (&gohci, dl_reverse_done_list (&gohci)); - writel (OHCI_INTR_WDH, ®s->intrenable); - } - - if (ints & OHCI_INTR_SO) { - dbg("USB Schedule overrun\n"); - writel (OHCI_INTR_SO, ®s->intrenable); - stat = -1; - } - - /* FIXME: this assumes SOF (1/ms) interrupts don't get lost... */ - if (ints & OHCI_INTR_SF) { - unsigned int frame = ohci_cpu_to_le16 (ohci->hcca->frame_no) & 1; - mdelay(1); - writel (OHCI_INTR_SF, ®s->intrdisable); - if (ohci->ed_rm_list[frame] != NULL) - writel (OHCI_INTR_SF, ®s->intrenable); - stat = 0xff; - } - - writel (ints, ®s->intrstatus); - return stat; -} - -/*-------------------------------------------------------------------------*/ - -/*-------------------------------------------------------------------------*/ - -/* De-allocate all resources.. */ - -static void hc_release_ohci (ohci_t *ohci) -{ - dbg ("USB HC release ohci usb-%s", ohci->slot_name); - - if (!ohci->disabled) - hc_reset (ohci); -} - -/*-------------------------------------------------------------------------*/ - -/* - * low level initalisation routine, called from usb.c - */ -static char ohci_inited = 0; - -int usb_lowlevel_init(int index, enum usb_init_type init, void **controller) -{ - - /* Set the USB Clock */ - *(vu_long *)MPC5XXX_CDM_48_FDC = CONFIG_USB_CLOCK; - -#ifdef CONFIG_PSC3_USB /* USB is using the alternate configuration */ - /* remove all PSC3 USB bits first before ORing in ours */ - *(vu_long *)MPC5XXX_GPS_PORT_CONFIG &= ~0x00804f00; -#else - /* remove all USB bits first before ORing in ours */ - *(vu_long *)MPC5XXX_GPS_PORT_CONFIG &= ~0x00807000; -#endif - /* Activate USB port */ - *(vu_long *)MPC5XXX_GPS_PORT_CONFIG |= CONFIG_USB_CONFIG; - - memset (&gohci, 0, sizeof (ohci_t)); - memset (&urb_priv, 0, sizeof (urb_priv_t)); - - /* align the storage */ - if ((__u32)&ghcca[0] & 0xff) { - err("HCCA not aligned!!"); - return -1; - } - phcca = &ghcca[0]; - info("aligned ghcca %p", phcca); - memset(&ohci_dev, 0, sizeof(struct ohci_device)); - if ((__u32)&ohci_dev.ed[0] & 0x7) { - err("EDs not aligned!!"); - return -1; - } - memset(gtd, 0, sizeof(td_t) * (NUM_TD + 1)); - if ((__u32)gtd & 0x7) { - err("TDs not aligned!!"); - return -1; - } - ptd = gtd; - gohci.hcca = phcca; - memset (phcca, 0, sizeof (struct ohci_hcca)); - - gohci.disabled = 1; - gohci.sleeping = 0; - gohci.irq = -1; - gohci.regs = (struct ohci_regs *)MPC5XXX_USB; - - gohci.flags = 0; - gohci.slot_name = "mpc5200"; - - if (hc_reset (&gohci) < 0) { - hc_release_ohci (&gohci); - return -1; - } - - if (hc_start (&gohci) < 0) { - err ("can't start usb-%s", gohci.slot_name); - hc_release_ohci (&gohci); - return -1; - } - -#ifdef DEBUG - ohci_dump (&gohci, 1); -#endif - ohci_inited = 1; - urb_finished = 1; - - return 0; -} - -int usb_lowlevel_stop(int index) -{ - /* this gets called really early - before the controller has */ - /* even been initialized! */ - if (!ohci_inited) - return 0; - /* TODO release any interrupts, etc. */ - /* call hc_release_ohci() here ? */ - hc_reset (&gohci); - return 0; -} - -#endif /* CONFIG_USB_OHCI */ diff --git a/arch/powerpc/cpu/mpc5xxx/usb_ohci.h b/arch/powerpc/cpu/mpc5xxx/usb_ohci.h deleted file mode 100644 index 629b529a69..0000000000 --- a/arch/powerpc/cpu/mpc5xxx/usb_ohci.h +++ /dev/null @@ -1,418 +0,0 @@ -/* - * URB OHCI HCD (Host Controller Driver) for USB. - * - * (C) Copyright 1999 Roman Weissgaerber weissg@vienna.at - * (C) Copyright 2000-2001 David Brownell dbrownell@users.sourceforge.net - * - * usb-ohci.h - */ - - -static int cc_to_error[16] = { - -/* mapping of the OHCI CC status to error codes */ - /* No Error */ 0, - /* CRC Error */ USB_ST_CRC_ERR, - /* Bit Stuff */ USB_ST_BIT_ERR, - /* Data Togg */ USB_ST_CRC_ERR, - /* Stall */ USB_ST_STALLED, - /* DevNotResp */ -1, - /* PIDCheck */ USB_ST_BIT_ERR, - /* UnExpPID */ USB_ST_BIT_ERR, - /* DataOver */ USB_ST_BUF_ERR, - /* DataUnder */ USB_ST_BUF_ERR, - /* reservd */ -1, - /* reservd */ -1, - /* BufferOver */ USB_ST_BUF_ERR, - /* BuffUnder */ USB_ST_BUF_ERR, - /* Not Access */ -1, - /* Not Access */ -1 -}; - -/* ED States */ - -#define ED_NEW 0x00 -#define ED_UNLINK 0x01 -#define ED_OPER 0x02 -#define ED_DEL 0x04 -#define ED_URB_DEL 0x08 - -/* usb_ohci_ed */ -struct ed { - __u32 hwINFO; - __u32 hwTailP; - __u32 hwHeadP; - __u32 hwNextED; - - struct ed *ed_prev; - __u8 int_period; - __u8 int_branch; - __u8 int_load; - __u8 int_interval; - __u8 state; - __u8 type; - __u16 last_iso; - struct ed *ed_rm_list; - - struct usb_device *usb_dev; - __u32 unused[3]; -} __attribute__((aligned(16))); -typedef struct ed ed_t; - - -/* TD info field */ -#define TD_CC 0xf0000000 -#define TD_CC_GET(td_p) ((td_p >>28) & 0x0f) -#define TD_CC_SET(td_p, cc) (td_p) = ((td_p) & 0x0fffffff) | (((cc) & 0x0f) << 28) -#define TD_EC 0x0C000000 -#define TD_T 0x03000000 -#define TD_T_DATA0 0x02000000 -#define TD_T_DATA1 0x03000000 -#define TD_T_TOGGLE 0x00000000 -#define TD_R 0x00040000 -#define TD_DI 0x00E00000 -#define TD_DI_SET(X) (((X) & 0x07)<< 21) -#define TD_DP 0x00180000 -#define TD_DP_SETUP 0x00000000 -#define TD_DP_IN 0x00100000 -#define TD_DP_OUT 0x00080000 - -#define TD_ISO 0x00010000 -#define TD_DEL 0x00020000 - -/* CC Codes */ -#define TD_CC_NOERROR 0x00 -#define TD_CC_CRC 0x01 -#define TD_CC_BITSTUFFING 0x02 -#define TD_CC_DATATOGGLEM 0x03 -#define TD_CC_STALL 0x04 -#define TD_DEVNOTRESP 0x05 -#define TD_PIDCHECKFAIL 0x06 -#define TD_UNEXPECTEDPID 0x07 -#define TD_DATAOVERRUN 0x08 -#define TD_DATAUNDERRUN 0x09 -#define TD_BUFFEROVERRUN 0x0C -#define TD_BUFFERUNDERRUN 0x0D -#define TD_NOTACCESSED 0x0F - - -#define MAXPSW 1 - -struct td { - __u32 hwINFO; - __u32 hwCBP; /* Current Buffer Pointer */ - __u32 hwNextTD; /* Next TD Pointer */ - __u32 hwBE; /* Memory Buffer End Pointer */ - - __u8 unused; - __u8 index; - struct ed *ed; - struct td *next_dl_td; - struct usb_device *usb_dev; - int transfer_len; - __u32 data; - - __u32 unused2[2]; -} __attribute__((aligned(32))); -typedef struct td td_t; - -#define OHCI_ED_SKIP (1 << 14) - -/* - * The HCCA (Host Controller Communications Area) is a 256 byte - * structure defined in the OHCI spec. that the host controller is - * told the base address of. It must be 256-byte aligned. - */ - -#define NUM_INTS 32 /* part of the OHCI standard */ -struct ohci_hcca { - __u32 int_table[NUM_INTS]; /* Interrupt ED table */ - __u16 pad1; /* set to 0 on each frame_no change */ - __u16 frame_no; /* current frame number */ - __u32 done_head; /* info returned for an interrupt */ - u8 reserved_for_hc[116]; -} __attribute__((aligned(256))); - - -/* - * Maximum number of root hub ports. - */ -#define MAX_ROOT_PORTS 15 /* maximum OHCI root hub ports */ - -/* - * This is the structure of the OHCI controller's memory mapped I/O - * region. This is Memory Mapped I/O. You must use the readl() and - * writel() macros defined in asm/io.h to access these!! - */ -struct ohci_regs { - /* control and status registers */ - __u32 revision; - __u32 control; - __u32 cmdstatus; - __u32 intrstatus; - __u32 intrenable; - __u32 intrdisable; - /* memory pointers */ - __u32 hcca; - __u32 ed_periodcurrent; - __u32 ed_controlhead; - __u32 ed_controlcurrent; - __u32 ed_bulkhead; - __u32 ed_bulkcurrent; - __u32 donehead; - /* frame counters */ - __u32 fminterval; - __u32 fmremaining; - __u32 fmnumber; - __u32 periodicstart; - __u32 lsthresh; - /* Root hub ports */ - struct ohci_roothub_regs { - __u32 a; - __u32 b; - __u32 status; - __u32 portstatus[MAX_ROOT_PORTS]; - } roothub; -} __attribute__((aligned(32))); - - -/* OHCI CONTROL AND STATUS REGISTER MASKS */ - -/* - * HcControl (control) register masks - */ -#define OHCI_CTRL_CBSR (3 << 0) /* control/bulk service ratio */ -#define OHCI_CTRL_PLE (1 << 2) /* periodic list enable */ -#define OHCI_CTRL_IE (1 << 3) /* isochronous enable */ -#define OHCI_CTRL_CLE (1 << 4) /* control list enable */ -#define OHCI_CTRL_BLE (1 << 5) /* bulk list enable */ -#define OHCI_CTRL_HCFS (3 << 6) /* host controller functional state */ -#define OHCI_CTRL_IR (1 << 8) /* interrupt routing */ -#define OHCI_CTRL_RWC (1 << 9) /* remote wakeup connected */ -#define OHCI_CTRL_RWE (1 << 10) /* remote wakeup enable */ - -/* pre-shifted values for HCFS */ -# define OHCI_USB_RESET (0 << 6) -# define OHCI_USB_RESUME (1 << 6) -# define OHCI_USB_OPER (2 << 6) -# define OHCI_USB_SUSPEND (3 << 6) - -/* - * HcCommandStatus (cmdstatus) register masks - */ -#define OHCI_HCR (1 << 0) /* host controller reset */ -#define OHCI_CLF (1 << 1) /* control list filled */ -#define OHCI_BLF (1 << 2) /* bulk list filled */ -#define OHCI_OCR (1 << 3) /* ownership change request */ -#define OHCI_SOC (3 << 16) /* scheduling overrun count */ - -/* - * masks used with interrupt registers: - * HcInterruptStatus (intrstatus) - * HcInterruptEnable (intrenable) - * HcInterruptDisable (intrdisable) - */ -#define OHCI_INTR_SO (1 << 0) /* scheduling overrun */ -#define OHCI_INTR_WDH (1 << 1) /* writeback of done_head */ -#define OHCI_INTR_SF (1 << 2) /* start frame */ -#define OHCI_INTR_RD (1 << 3) /* resume detect */ -#define OHCI_INTR_UE (1 << 4) /* unrecoverable error */ -#define OHCI_INTR_FNO (1 << 5) /* frame number overflow */ -#define OHCI_INTR_RHSC (1 << 6) /* root hub status change */ -#define OHCI_INTR_OC (1 << 30) /* ownership change */ -#define OHCI_INTR_MIE (1 << 31) /* master interrupt enable */ - - -/* Virtual Root HUB */ -struct virt_root_hub { - int devnum; /* Address of Root Hub endpoint */ - void *dev; /* was urb */ - void *int_addr; - int send; - int interval; -}; - -/* USB HUB CONSTANTS (not OHCI-specific; see hub.h) */ - -/* destination of request */ -#define RH_INTERFACE 0x01 -#define RH_ENDPOINT 0x02 -#define RH_OTHER 0x03 - -#define RH_CLASS 0x20 -#define RH_VENDOR 0x40 - -/* Requests: bRequest << 8 | bmRequestType */ -#define RH_GET_STATUS 0x0080 -#define RH_CLEAR_FEATURE 0x0100 -#define RH_SET_FEATURE 0x0300 -#define RH_SET_ADDRESS 0x0500 -#define RH_GET_DESCRIPTOR 0x0680 -#define RH_SET_DESCRIPTOR 0x0700 -#define RH_GET_CONFIGURATION 0x0880 -#define RH_SET_CONFIGURATION 0x0900 -#define RH_GET_STATE 0x0280 -#define RH_GET_INTERFACE 0x0A80 -#define RH_SET_INTERFACE 0x0B00 -#define RH_SYNC_FRAME 0x0C80 -/* Our Vendor Specific Request */ -#define RH_SET_EP 0x2000 - - -/* Hub port features */ -#define RH_PORT_CONNECTION 0x00 -#define RH_PORT_ENABLE 0x01 -#define RH_PORT_SUSPEND 0x02 -#define RH_PORT_OVER_CURRENT 0x03 -#define RH_PORT_RESET 0x04 -#define RH_PORT_POWER 0x08 -#define RH_PORT_LOW_SPEED 0x09 - -#define RH_C_PORT_CONNECTION 0x10 -#define RH_C_PORT_ENABLE 0x11 -#define RH_C_PORT_SUSPEND 0x12 -#define RH_C_PORT_OVER_CURRENT 0x13 -#define RH_C_PORT_RESET 0x14 - -/* Hub features */ -#define RH_C_HUB_LOCAL_POWER 0x00 -#define RH_C_HUB_OVER_CURRENT 0x01 - -#define RH_DEVICE_REMOTE_WAKEUP 0x00 -#define RH_ENDPOINT_STALL 0x01 - -#define RH_ACK 0x01 -#define RH_REQ_ERR -1 -#define RH_NACK 0x00 - - -/* OHCI ROOT HUB REGISTER MASKS */ - -/* roothub.portstatus [i] bits */ -#define RH_PS_CCS 0x00000001 /* current connect status */ -#define RH_PS_PES 0x00000002 /* port enable status*/ -#define RH_PS_PSS 0x00000004 /* port suspend status */ -#define RH_PS_POCI 0x00000008 /* port over current indicator */ -#define RH_PS_PRS 0x00000010 /* port reset status */ -#define RH_PS_PPS 0x00000100 /* port power status */ -#define RH_PS_LSDA 0x00000200 /* low speed device attached */ -#define RH_PS_CSC 0x00010000 /* connect status change */ -#define RH_PS_PESC 0x00020000 /* port enable status change */ -#define RH_PS_PSSC 0x00040000 /* port suspend status change */ -#define RH_PS_OCIC 0x00080000 /* over current indicator change */ -#define RH_PS_PRSC 0x00100000 /* port reset status change */ - -/* roothub.status bits */ -#define RH_HS_LPS 0x00000001 /* local power status */ -#define RH_HS_OCI 0x00000002 /* over current indicator */ -#define RH_HS_DRWE 0x00008000 /* device remote wakeup enable */ -#define RH_HS_LPSC 0x00010000 /* local power status change */ -#define RH_HS_OCIC 0x00020000 /* over current indicator change */ -#define RH_HS_CRWE 0x80000000 /* clear remote wakeup enable */ - -/* roothub.b masks */ -#define RH_B_DR 0x0000ffff /* device removable flags */ -#define RH_B_PPCM 0xffff0000 /* port power control mask */ - -/* roothub.a masks */ -#define RH_A_NDP (0xff << 0) /* number of downstream ports */ -#define RH_A_PSM (1 << 8) /* power switching mode */ -#define RH_A_NPS (1 << 9) /* no power switching */ -#define RH_A_DT (1 << 10) /* device type (mbz) */ -#define RH_A_OCPM (1 << 11) /* over current protection mode */ -#define RH_A_NOCP (1 << 12) /* no over current protection */ -#define RH_A_POTPGT (0xff << 24) /* power on to power good time */ - -/* urb */ -#define N_URB_TD 48 -typedef struct -{ - ed_t *ed; - __u16 length; /* number of tds associated with this request */ - __u16 td_cnt; /* number of tds already serviced */ - int state; - unsigned long pipe; - int actual_length; - td_t *td[N_URB_TD]; /* list pointer to all corresponding TDs associated with this request */ -} urb_priv_t; -#define URB_DEL 1 - -/* - * This is the full ohci controller description - * - * Note how the "proper" USB information is just - * a subset of what the full implementation needs. (Linus) - */ - - -typedef struct ohci { - struct ohci_hcca *hcca; /* hcca */ - /*dma_addr_t hcca_dma;*/ - - int irq; - int disabled; /* e.g. got a UE, we're hung */ - int sleeping; - unsigned long flags; /* for HC bugs */ - - struct ohci_regs *regs; /* OHCI controller's memory */ - - ed_t *ed_rm_list[2]; /* lists of all endpoints to be removed */ - ed_t *ed_bulktail; /* last endpoint of bulk list */ - ed_t *ed_controltail; /* last endpoint of control list */ - int intrstatus; - __u32 hc_control; /* copy of the hc control reg */ - struct usb_device *dev[32]; - struct virt_root_hub rh; - - const char *slot_name; -} ohci_t; - -#define NUM_EDS 8 /* num of preallocated endpoint descriptors */ - -struct ohci_device { - ed_t ed[NUM_EDS]; - int ed_cnt; -}; - -/* hcd */ -/* endpoint */ -static int ep_link(ohci_t * ohci, ed_t * ed); -static int ep_unlink(ohci_t * ohci, ed_t * ed); -static ed_t * ep_add_ed(struct usb_device * usb_dev, unsigned long pipe); - -/*-------------------------------------------------------------------------*/ - -/* we need more TDs than EDs */ -#define NUM_TD 64 - -/* +1 so we can align the storage */ -td_t gtd[NUM_TD+1]; -/* pointers to aligned storage */ -td_t *ptd; - -/* TDs ... */ -static inline struct td * -td_alloc (struct usb_device *usb_dev) -{ - int i; - struct td *td; - - td = NULL; - for (i = 0; i < NUM_TD; i++) - { - if (ptd[i].usb_dev == NULL) - { - td = &ptd[i]; - td->usb_dev = usb_dev; - break; - } - } - - return td; -} - -static inline void -ed_free (struct ed *ed) -{ - ed->usb_dev = NULL; -} diff --git a/arch/powerpc/cpu/ppc4xx/usb_ohci.c b/arch/powerpc/cpu/ppc4xx/usb_ohci.c index 27423e3779..45f0093855 100644 --- a/arch/powerpc/cpu/ppc4xx/usb_ohci.c +++ b/arch/powerpc/cpu/ppc4xx/usb_ohci.c @@ -782,9 +782,6 @@ static td_t * dl_reverse_done_list (ohci_t *ohci) } else td_list->ed->hwHeadP &= ohci_cpu_to_le32 (0xfffffff2); } -#ifdef CONFIG_MPC5200 - td_list->hwNextTD = 0; -#endif }
td_list->next_dl_td = td_rev; diff --git a/arch/powerpc/cpu/ppc4xx/usb_ohci.h b/arch/powerpc/cpu/ppc4xx/usb_ohci.h index 2c3dc4f99c..9e7da0d162 100644 --- a/arch/powerpc/cpu/ppc4xx/usb_ohci.h +++ b/arch/powerpc/cpu/ppc4xx/usb_ohci.h @@ -125,13 +125,8 @@ typedef struct td td_t; #define NUM_INTS 32 /* part of the OHCI standard */ struct ohci_hcca { __u32 int_table[NUM_INTS]; /* Interrupt ED table */ -#if defined(CONFIG_MPC5200) - __u16 pad1; /* set to 0 on each frame_no change */ - __u16 frame_no; /* current frame number */ -#else __u16 frame_no; /* current frame number */ __u16 pad1; /* set to 0 on each frame_no change */ -#endif __u32 done_head; /* info returned for an interrupt */ u8 reserved_for_hc[116]; } __attribute__((aligned(256))); diff --git a/arch/powerpc/include/asm/global_data.h b/arch/powerpc/include/asm/global_data.h index 3943d0e92b..2efa6240c5 100644 --- a/arch/powerpc/include/asm/global_data.h +++ b/arch/powerpc/include/asm/global_data.h @@ -84,13 +84,6 @@ struct arch_global_data { #if defined(CONFIG_E500) u32 used_tlb_cams[(CONFIG_SYS_NUM_TLBCAMS+31)/32]; #endif -#if defined(CONFIG_MPC5xxx) - unsigned long ipb_clk; -#endif -#if defined(CONFIG_MPC512X) - u32 ips_clk; - u32 csb_clk; -#endif /* CONFIG_MPC512X */ unsigned long reset_status; /* reset status register at boot */ #if defined(CONFIG_MPC83xx) unsigned long arbiter_event_attributes; diff --git a/arch/powerpc/include/asm/immap_512x.h b/arch/powerpc/include/asm/immap_512x.h deleted file mode 100644 index bed80aa933..0000000000 --- a/arch/powerpc/include/asm/immap_512x.h +++ /dev/null @@ -1,1264 +0,0 @@ -/* - * (C) Copyright 2007-2009 DENX Software Engineering - * - * MPC512x Internal Memory Map - * - * SPDX-License-Identifier: GPL-2.0+ - * - * Based on the MPC83xx header. - */ - -#ifndef __IMMAP_512x__ -#define __IMMAP_512x__ - -#include <asm/types.h> -#if defined(CONFIG_E300) -#include <asm/e300.h> -#endif - -/* - * System reset offset (PowerPC standard) - */ -#define EXC_OFF_SYS_RESET 0x0100 -#define _START_OFFSET EXC_OFF_SYS_RESET - -#define SPR_5121E 0x80180000 - -/* - * IMMRBAR - Internal Memory Register Base Address - */ -#define CONFIG_DEFAULT_IMMR 0xFF400000 /* Default IMMR base address */ -#define IMMRBAR 0x0000 /* Register offset to immr */ -#define IMMRBAR_BASE_ADDR 0xFFF00000 /* Base address mask */ -#define IMMRBAR_RES ~(IMMRBAR_BASE_ADDR) - - -#ifndef __ASSEMBLY__ -typedef struct law512x { - u32 bar; /* Base Addr Register */ - u32 ar; /* Attributes Register */ -} law512x_t; - -/* - * System configuration registers - */ -typedef struct sysconf512x { - u32 immrbar; /* Internal memory map base address register */ - u8 res0[0x1c]; - u32 lpbaw; /* LP Boot Access Window */ - u32 lpcs0aw; /* LP CS0 Access Window */ - u32 lpcs1aw; /* LP CS1 Access Window */ - u32 lpcs2aw; /* LP CS2 Access Window */ - u32 lpcs3aw; /* LP CS3 Access Window */ - u32 lpcs4aw; /* LP CS4 Access Window */ - u32 lpcs5aw; /* LP CS5 Access Window */ - u32 lpcs6aw; /* LP CS6 Access Window */ - u32 lpcs7aw; /* LP CS7 Access Window */ - u8 res1[0x1c]; - law512x_t pcilaw[3]; /* PCI Local Access Window 0-2 Registers */ - u8 res2[0x28]; - law512x_t ddrlaw; /* DDR Local Access Window */ - u8 res3[0x18]; - u32 mbxbar; /* MBX Base Address */ - u32 srambar; /* SRAM Base Address */ - u32 nfcbar; /* NFC Base Address */ - u8 res4[0x34]; - u32 spridr; /* System Part and Revision ID Register */ - u32 spcr; /* System Priority Configuration Register */ - u8 res5[0xf8]; -} sysconf512x_t; - -#define LAWBAR_BAR 0xFFFFF000 /* Base address mask */ - -/* - * Watch Dog Timer (WDT) Registers - */ -typedef struct wdt512x { - u8 res0[4]; - u32 swcrr; /* System watchdog control register */ - u32 swcnr; /* System watchdog count register */ - u8 res1[2]; - u16 swsrr; /* System watchdog service register */ - u8 res2[0xF0]; -} wdt512x_t; - -/* - * RTC Module Registers - */ -typedef struct rtclk512x { - u8 fixme[0x100]; -} rtclk512x_t; - -/* - * General Purpose Timer - */ -typedef struct gpt512x { - u8 fixme[0x100]; -} gpt512x_t; - -/* - * Integrated Programmable Interrupt Controller - */ -typedef struct ipic512x { - u8 fixme[0x100]; -} ipic512x_t; - -/* - * System Arbiter Registers - */ -typedef struct arbiter512x { - u32 acr; /* Arbiter Configuration Register */ - u32 atr; /* Arbiter Timers Register */ - u32 ater; /* Arbiter Transfer Error Register */ - u32 aer; /* Arbiter Event Register */ - u32 aidr; /* Arbiter Interrupt Definition Register */ - u32 amr; /* Arbiter Mask Register */ - u32 aeatr; /* Arbiter Event Attributes Register */ - u32 aeadr; /* Arbiter Event Address Register */ - u32 aerr; /* Arbiter Event Response Register */ - u8 res1[0xDC]; -} arbiter512x_t; - -/* - * Reset Module - */ -typedef struct reset512x { - u32 rcwl; /* Reset Configuration Word Low Register */ - u32 rcwh; /* Reset Configuration Word High Register */ - u8 res0[8]; - u32 rsr; /* Reset Status Register */ - u32 rmr; /* Reset Mode Register */ - u32 rpr; /* Reset protection Register */ - u32 rcr; /* Reset Control Register */ - u32 rcer; /* Reset Control Enable Register */ - u8 res1[0xDC]; -} reset512x_t; - -/* RSR - Reset Status Register */ -#define RSR_SWSR 0x00002000 /* software soft reset */ -#define RSR_SWHR 0x00001000 /* software hard reset */ -#define RSR_JHRS 0x00000200 /* jtag hreset */ -#define RSR_JSRS 0x00000100 /* jtag sreset status */ -#define RSR_CSHR 0x00000010 /* checkstop reset status */ -#define RSR_SWRS 0x00000008 /* software watchdog reset status */ -#define RSR_BMRS 0x00000004 /* bus monitop reset status */ -#define RSR_SRS 0x00000002 /* soft reset status */ -#define RSR_HRS 0x00000001 /* hard reset status */ -#define RSR_RES ~(RSR_SWSR | RSR_SWHR |\ - RSR_JHRS | RSR_JSRS | RSR_CSHR | RSR_SWRS |\ - RSR_BMRS | RSR_SRS | RSR_HRS) - -/* RMR - Reset Mode Register */ -#define RMR_CSRE 0x00000001 /* checkstop reset enable */ -#define RMR_CSRE_SHIFT 0 -#define RMR_RES (~(RMR_CSRE)) - -/* RCR - Reset Control Register */ -#define RCR_SWHR 0x00000002 /* software hard reset */ -#define RCR_SWSR 0x00000001 /* software soft reset */ -#define RCR_RES (~(RCR_SWHR | RCR_SWSR)) - -/* RCER - Reset Control Enable Register */ -#define RCER_CRE 0x00000001 /* software hard reset */ -#define RCER_RES (~(RCER_CRE)) - -/* - * Clock Module - */ -typedef struct clk512x { - u32 spmr; /* System PLL Mode Register */ - u32 sccr[2]; /* System Clock Control Registers */ - u32 scfr[2]; /* System Clock Frequency Registers */ - u8 res0[4]; - u32 bcr; /* Bread Crumb Register */ - u32 pscccr[12]; /* PSC0-11 Clock Control Registers */ - u32 spccr; /* SPDIF Clock Control Register */ - u32 cccr; /* CFM Clock Control Register */ - u32 dccr; /* DIU Clock Control Register */ - u32 msccr[4]; /* MSCAN1-4 Clock Control Registers */ - u8 res1[0x98]; -} clk512x_t; - -/* SPMR - System PLL Mode Register */ -#define SPMR_SPMF 0x0F000000 -#define SPMR_SPMF_SHIFT 24 -#define SPMR_CPMF 0x000F0000 -#define SPMR_CPMF_SHIFT 16 - -/* System Clock Control Register 1 commands */ -#define CLOCK_SCCR1_CFG_EN 0x80000000 -#define CLOCK_SCCR1_LPC_EN 0x40000000 -#define CLOCK_SCCR1_NFC_EN 0x20000000 -#define CLOCK_SCCR1_PATA_EN 0x10000000 -#define CLOCK_SCCR1_PSC_EN(cn) (0x08000000 >> (cn)) -#define CLOCK_SCCR1_PSCFIFO_EN 0x00008000 -#define CLOCK_SCCR1_SATA_EN 0x00004000 -#define CLOCK_SCCR1_FEC_EN 0x00002000 -#define CLOCK_SCCR1_TPR_EN 0x00001000 -#define CLOCK_SCCR1_PCI_EN 0x00000800 -#define CLOCK_SCCR1_DDR_EN 0x00000400 - -/* System Clock Control Register 2 commands */ -#define CLOCK_SCCR2_DIU_EN 0x80000000 -#define CLOCK_SCCR2_AXE_EN 0x40000000 -#define CLOCK_SCCR2_MEM_EN 0x20000000 -#define CLOCK_SCCR2_USB1_EN 0x10000000 -#define CLOCK_SCCR2_USB2_EN 0x08000000 -#define CLOCK_SCCR2_I2C_EN 0x04000000 -#define CLOCK_SCCR2_BDLC_EN 0x02000000 -#define CLOCK_SCCR2_SDHC_EN 0x01000000 -#define CLOCK_SCCR2_SPDIF_EN 0x00800000 -#define CLOCK_SCCR2_MBX_BUS_EN 0x00400000 -#define CLOCK_SCCR2_MBX_EN 0x00200000 -#define CLOCK_SCCR2_MBX_3D_EN 0x00100000 -#define CLOCK_SCCR2_IIM_EN 0x00080000 - -/* SCFR1 System Clock Frequency Register 1 */ -#ifndef SCFR1_IPS_DIV -#define SCFR1_IPS_DIV 0x3 -#endif -#define SCFR1_IPS_DIV_MASK 0x03800000 -#define SCFR1_IPS_DIV_SHIFT 23 - -#define SCFR1_PCI_DIV 0x6 -#define SCFR1_PCI_DIV_MASK 0x00700000 -#define SCFR1_PCI_DIV_SHIFT 20 - -#define SCFR1_LPC_DIV_MASK 0x00003800 -#define SCFR1_LPC_DIV_SHIFT 11 - -#define SCFR1_NFC_DIV_MASK 0x00000700 -#define SCFR1_NFC_DIV_SHIFT 8 - -#define SCFR1_DIU_DIV_MASK 0x000000FF -#define SCFR1_DIU_DIV_SHIFT 0 - -/* SCFR2 System Clock Frequency Register 2 */ -#define SCFR2_SYS_DIV 0xFC000000 -#define SCFR2_SYS_DIV_SHIFT 26 - -/* SPCR - System Priority Configuration Register */ -#define SPCR_TBEN 0x00400000 /* E300 core time base unit enable */ - -/* - * Power Management Control Module - */ -typedef struct pmc512x { - u8 fixme[0x100]; -} pmc512x_t; - -/* - * General purpose I/O module - */ -typedef struct gpio512x { - u32 gpdir; - u32 gpodr; - u32 gpdat; - u32 gpier; - u32 gpimr; - u32 gpicr1; - u32 gpicr2; - u8 res0[0xE4]; -} gpio512x_t; - -/* - * DDR Memory Controller Memory Map - */ -typedef struct ddr512x { - u32 ddr_sys_config; /* System Configuration Register */ - u32 ddr_time_config0; /* Timing Configuration Register */ - u32 ddr_time_config1; /* Timing Configuration Register */ - u32 ddr_time_config2; /* Timing Configuration Register */ - u32 ddr_command; /* Command Register */ - u32 ddr_compact_command; /* Compact Command Register */ - u32 self_refresh_cmd_0; /* Enter/Exit Self Refresh Registers */ - u32 self_refresh_cmd_1; /* Enter/Exit Self Refresh Registers */ - u32 self_refresh_cmd_2; /* Enter/Exit Self Refresh Registers */ - u32 self_refresh_cmd_3; /* Enter/Exit Self Refresh Registers */ - u32 self_refresh_cmd_4; /* Enter/Exit Self Refresh Registers */ - u32 self_refresh_cmd_5; /* Enter/Exit Self Refresh Registers */ - u32 self_refresh_cmd_6; /* Enter/Exit Self Refresh Registers */ - u32 self_refresh_cmd_7; /* Enter/Exit Self Refresh Registers */ - u32 dqs_config_offset_count; /* DQS Config Offset Count */ - u32 dqs_config_offset_time; /* DQS Config Offset Time */ - u32 DQS_delay_status; /* DQS Delay Status */ - u32 res0[0xF]; - u32 prioman_config1; /* Priority Manager Configuration */ - u32 prioman_config2; /* Priority Manager Configuration */ - u32 hiprio_config; /* High Priority Configuration */ - u32 lut_table0_main_upper; /* LUT0 Main Upper */ - u32 lut_table1_main_upper; /* LUT1 Main Upper */ - u32 lut_table2_main_upper; /* LUT2 Main Upper */ - u32 lut_table3_main_upper; /* LUT3 Main Upper */ - u32 lut_table4_main_upper; /* LUT4 Main Upper */ - u32 lut_table0_main_lower; /* LUT0 Main Lower */ - u32 lut_table1_main_lower; /* LUT1 Main Lower */ - u32 lut_table2_main_lower; /* LUT2 Main Lower */ - u32 lut_table3_main_lower; /* LUT3 Main Lower */ - u32 lut_table4_main_lower; /* LUT4 Main Lower */ - u32 lut_table0_alternate_upper; /* LUT0 Alternate Upper */ - u32 lut_table1_alternate_upper; /* LUT1 Alternate Upper */ - u32 lut_table2_alternate_upper; /* LUT2 Alternate Upper */ - u32 lut_table3_alternate_upper; /* LUT3 Alternate Upper */ - u32 lut_table4_alternate_upper; /* LUT4 Alternate Upper */ - u32 lut_table0_alternate_lower; /* LUT0 Alternate Lower */ - u32 lut_table1_alternate_lower; /* LUT1 Alternate Lower */ - u32 lut_table2_alternate_lower; /* LUT2 Alternate Lower */ - u32 lut_table3_alternate_lower; /* LUT3 Alternate Lower */ - u32 lut_table4_alternate_lower; /* LUT4 Alternate Lower */ - u32 performance_monitor_config; - u32 event_time_counter; - u32 event_time_preset; - u32 performance_monitor1_address_low; - u32 performance_monitor2_address_low; - u32 performance_monitor1_address_hi; - u32 performance_monitor2_address_hi; - u32 res1[2]; - u32 performance_monitor1_read_counter; - u32 performance_monitor2_read_counter; - u32 performance_monitor1_write_counter; - u32 performance_monitor2_write_counter; - u32 granted_ack_counter0; - u32 granted_ack_counter1; - u32 granted_ack_counter2; - u32 granted_ack_counter3; - u32 granted_ack_counter4; - u32 cumulative_wait_counter0; - u32 cumulative_wait_counter1; - u32 cumulative_wait_counter2; - u32 cumulative_wait_counter3; - u32 cumulative_wait_counter4; - u32 summed_priority_counter0; - u32 summed_priority_counter1; - u32 summed_priority_counter2; - u32 summed_priority_counter3; - u32 summed_priority_counter4; - u32 res2[0x3AD]; -} ddr512x_t; - -/* MDDRC SYS CFG and Timing CFG0 Registers */ -#define MDDRC_SYS_CFG_EN 0xF0000000 -#define MDDRC_SYS_CFG_CKE_MASK 0x40000000 -#define MDDRC_SYS_CFG_CMD_MASK 0x10000000 -#define MDDRC_REFRESH_ZERO_MASK 0x0000FFFF - -/* - * DDR Memory Controller Configuration settings - */ -typedef struct ddr512x_config { - u32 ddr_sys_config; /* System Configuration Register */ - u32 ddr_time_config0; /* Timing Configuration Register */ - u32 ddr_time_config1; /* Timing Configuration Register */ - u32 ddr_time_config2; /* Timing Configuration Register */ -} ddr512x_config_t; - -typedef struct sdram_conf_s { - unsigned long size; - ddr512x_config_t cfg; -} sdram_conf_t; - -/* - * DMA/Messaging Unit - */ -typedef struct dma512x { - u8 fixme[0x1800]; -} dma512x_t; - -/* - * PCI Software Configuration Registers - */ -typedef struct pciconf512x { - u32 config_address; - u32 config_data; - u32 int_ack; - u8 res[116]; -} pciconf512x_t; - -/* - * PCI Outbound Translation Register - */ -typedef struct pci_outbound_window { - u32 potar; - u8 res0[4]; - u32 pobar; - u8 res1[4]; - u32 pocmr; - u8 res2[4]; -} pot512x_t; - -/* POTAR - PCI Outbound Translation Address Register */ -#define POTAR_TA_MASK 0x000fffff - -/* POBAR - PCI Outbound Base Address Register */ -#define POBAR_BA_MASK 0x000fffff - -/* POCMR - PCI Outbound Comparision Mask Register */ -#define POCMR_EN 0x80000000 -#define POCMR_IO 0x40000000 /* 0-memory space 1-I/O space */ -#define POCMR_PRE 0x20000000 /* prefetch enable */ -#define POCMR_SBS 0x00100000 /* special byte swap enable */ -#define POCMR_CM_MASK 0x000fffff -#define POCMR_CM_4G 0x00000000 -#define POCMR_CM_2G 0x00080000 -#define POCMR_CM_1G 0x000C0000 -#define POCMR_CM_512M 0x000E0000 -#define POCMR_CM_256M 0x000F0000 -#define POCMR_CM_128M 0x000F8000 -#define POCMR_CM_64M 0x000FC000 -#define POCMR_CM_32M 0x000FE000 -#define POCMR_CM_16M 0x000FF000 -#define POCMR_CM_8M 0x000FF800 -#define POCMR_CM_4M 0x000FFC00 -#define POCMR_CM_2M 0x000FFE00 -#define POCMR_CM_1M 0x000FFF00 -#define POCMR_CM_512K 0x000FFF80 -#define POCMR_CM_256K 0x000FFFC0 -#define POCMR_CM_128K 0x000FFFE0 -#define POCMR_CM_64K 0x000FFFF0 -#define POCMR_CM_32K 0x000FFFF8 -#define POCMR_CM_16K 0x000FFFFC -#define POCMR_CM_8K 0x000FFFFE -#define POCMR_CM_4K 0x000FFFFF - -/* - * Sequencer - */ -typedef struct ios512x { - pot512x_t pot[6]; - u8 res0[0x60]; - u32 pmcr; - u8 res1[4]; - u32 dtcr; - u8 res2[4]; -} ios512x_t; - -/* - * PCI Controller - */ -typedef struct pcictrl512x { - u32 esr; - u32 ecdr; - u32 eer; - u32 eatcr; - u32 eacr; - u32 eeacr; - u32 edlcr; - u32 edhcr; - u32 gcr; - u32 ecr; - u32 gsr; - u8 res0[12]; - u32 pitar2; - u8 res1[4]; - u32 pibar2; - u32 piebar2; - u32 piwar2; - u8 res2[4]; - u32 pitar1; - u8 res3[4]; - u32 pibar1; - u32 piebar1; - u32 piwar1; - u8 res4[4]; - u32 pitar0; - u8 res5[4]; - u32 pibar0; - u8 res6[4]; - u32 piwar0; - u8 res7[132]; -} pcictrl512x_t; - - -/* PITAR - PCI Inbound Translation Address Register - */ -#define PITAR_TA_MASK 0x000fffff - -/* PIBAR - PCI Inbound Base/Extended Address Register - */ -#define PIBAR_MASK 0xffffffff -#define PIEBAR_EBA_MASK 0x000fffff - -/* PIWAR - PCI Inbound Windows Attributes Register - */ -#define PIWAR_EN 0x80000000 -#define PIWAR_SBS 0x40000000 -#define PIWAR_PF 0x20000000 -#define PIWAR_RTT_MASK 0x000f0000 -#define PIWAR_RTT_NO_SNOOP 0x00040000 -#define PIWAR_RTT_SNOOP 0x00050000 -#define PIWAR_WTT_MASK 0x0000f000 -#define PIWAR_WTT_NO_SNOOP 0x00004000 -#define PIWAR_WTT_SNOOP 0x00005000 - -/* - * MSCAN - */ -typedef struct mscan512x { - u8 fixme[0x100]; -} mscan512x_t; - -/* - * BDLC - */ -typedef struct bdlc512x { - u8 fixme[0x100]; -} bdlc512x_t; - -/* - * SDHC - */ -typedef struct sdhc512x { - u8 fixme[0x100]; -} sdhc512x_t; - -/* - * SPDIF - */ -typedef struct spdif512x { - u8 fixme[0x100]; -} spdif512x_t; - -/* - * I2C - */ -typedef struct i2c512x_dev { - volatile u32 madr; /* I2Cn + 0x00 */ - volatile u32 mfdr; /* I2Cn + 0x04 */ - volatile u32 mcr; /* I2Cn + 0x08 */ - volatile u32 msr; /* I2Cn + 0x0C */ - volatile u32 mdr; /* I2Cn + 0x10 */ - u8 res0[0x0C]; -} i2c512x_dev_t; - -/* Number of I2C buses */ -#define I2C_BUS_CNT 3 - -typedef struct i2c512x { - i2c512x_dev_t dev[I2C_BUS_CNT]; - volatile u32 icr; - volatile u32 mifr; - u8 res0[0x98]; -} i2c512x_t; - -/* I2Cn control register bits */ -#define I2C_EN 0x80 -#define I2C_IEN 0x40 -#define I2C_STA 0x20 -#define I2C_TX 0x10 -#define I2C_TXAK 0x08 -#define I2C_RSTA 0x04 -#define I2C_INIT_MASK (I2C_EN | I2C_STA | I2C_TX | I2C_RSTA) - -/* I2Cn status register bits */ -#define I2C_CF 0x80 -#define I2C_AAS 0x40 -#define I2C_BB 0x20 -#define I2C_AL 0x10 -#define I2C_SRW 0x04 -#define I2C_IF 0x02 -#define I2C_RXAK 0x01 - -/* - * AXE - */ -typedef struct axe512x { - u8 fixme[0x100]; -} axe512x_t; - -/* - * DIU - */ -typedef struct diu512x { - u8 fixme[0x100]; -} diu512x_t; - -/* - * CFM - */ -typedef struct cfm512x { - u8 fixme[0x100]; -} cfm512x_t; - -/* - * FEC - */ -typedef struct fec512x { - u32 fec_id; /* FEC_ID register */ - u32 ievent; /* Interrupt event register */ - u32 imask; /* Interrupt mask register */ - u32 reserved_01; - u32 r_des_active; /* Receive ring updated flag */ - u32 x_des_active; /* Transmit ring updated flag */ - u32 reserved_02[3]; - u32 ecntrl; /* Ethernet control register */ - u32 reserved_03[6]; - u32 mii_data; /* MII data register */ - u32 mii_speed; /* MII speed register */ - u32 reserved_04[7]; - u32 mib_control; /* MIB control/status register */ - u32 reserved_05[7]; - u32 r_cntrl; /* Receive control register */ - u32 r_hash; /* Receive hash */ - u32 reserved_06[14]; - u32 x_cntrl; /* Transmit control register */ - u32 reserved_07[7]; - u32 paddr1; /* Physical address low */ - u32 paddr2; /* Physical address high + type field */ - u32 op_pause; /* Opcode + pause duration */ - u32 reserved_08[10]; - u32 iaddr1; /* Upper 32 bits of individual hash table */ - u32 iaddr2; /* Lower 32 bits of individual hash table */ - u32 gaddr1; /* Upper 32 bits of group hash table */ - u32 gaddr2; /* Lower 32 bits of group hash table */ - u32 reserved_09[7]; - u32 x_wmrk; /* Transmit FIFO watermark */ - u32 reserved_10; - u32 r_bound; /* End of RAM */ - u32 r_fstart; /* Receive FIFO start address */ - u32 reserved_11[11]; - u32 r_des_start; /* Beginning of receive descriptor ring */ - u32 x_des_start; /* Pointer to beginning of transmit descriptor ring */ - u32 r_buff_size; /* Receive buffer size */ - u32 reserved_12[26]; - u32 dma_control; /* DMA control for IP bus, AMBA IF + DMA revision */ - u32 reserved_13[2]; - - u32 mib[128]; /* MIB Block Counters */ - - u32 fifo[256]; /* used by FEC, can only be accessed by DMA */ -} fec512x_t; - -/* - * ULPI - */ -typedef struct ulpi512x { - u8 fixme[0x600]; -} ulpi512x_t; - -/* - * UTMI - */ -typedef struct utmi512x { - u8 fixme[0x3000]; -} utmi512x_t; - -/* - * PCI DMA - */ -typedef struct pcidma512x { - u8 fixme[0x300]; -} pcidma512x_t; - -/* - * IO Control - */ -typedef struct ioctrl512x { - u32 io_control_mem; /* MEM pad ctrl reg */ - u32 io_control_gp; /* GP pad ctrl reg */ - u32 io_control_lpc_clk; /* LPC_CLK pad ctrl reg */ - u32 io_control_lpc_oe; /* LPC_OE pad ctrl reg */ - u32 io_control_lpc_rw; /* LPC_R/W pad ctrl reg */ - u32 io_control_lpc_ack; /* LPC_ACK pad ctrl reg */ - u32 io_control_lpc_cs0; /* LPC_CS0 pad ctrl reg */ - u32 io_control_nfc_ce0; /* NFC_CE0 pad ctrl reg */ - u32 io_control_lpc_cs1; /* LPC_CS1 pad ctrl reg */ - u32 io_control_lpc_cs2; /* LPC_CS2 pad ctrl reg */ - u32 io_control_lpc_ax03; /* LPC_AX03 pad ctrl reg */ - u32 io_control_emb_ax02; /* EMB_AX02 pad ctrl reg */ - u32 io_control_emb_ax01; /* EMB_AX01 pad ctrl reg */ - u32 io_control_emb_ax00; /* EMB_AX00 pad ctrl reg */ - u32 io_control_emb_ad31; /* EMB_AD31 pad ctrl reg */ - u32 io_control_emb_ad30; /* EMB_AD30 pad ctrl reg */ - u32 io_control_emb_ad29; /* EMB_AD29 pad ctrl reg */ - u32 io_control_emb_ad28; /* EMB_AD28 pad ctrl reg */ - u32 io_control_emb_ad27; /* EMB_AD27 pad ctrl reg */ - u32 io_control_emb_ad26; /* EMB_AD26 pad ctrl reg */ - u32 io_control_emb_ad25; /* EMB_AD25 pad ctrl reg */ - u32 io_control_emb_ad24; /* EMB_AD24 pad ctrl reg */ - u32 io_control_emb_ad23; /* EMB_AD23 pad ctrl reg */ - u32 io_control_emb_ad22; /* EMB_AD22 pad ctrl reg */ - u32 io_control_emb_ad21; /* EMB_AD21 pad ctrl reg */ - u32 io_control_emb_ad20; /* EMB_AD20 pad ctrl reg */ - u32 io_control_emb_ad19; /* EMB_AD19 pad ctrl reg */ - u32 io_control_emb_ad18; /* EMB_AD18 pad ctrl reg */ - u32 io_control_emb_ad17; /* EMB_AD17 pad ctrl reg */ - u32 io_control_emb_ad16; /* EMB_AD16 pad ctrl reg */ - u32 io_control_emb_ad15; /* EMB_AD15 pad ctrl reg */ - u32 io_control_emb_ad14; /* EMB_AD14 pad ctrl reg */ - u32 io_control_emb_ad13; /* EMB_AD13 pad ctrl reg */ - u32 io_control_emb_ad12; /* EMB_AD12 pad ctrl reg */ - u32 io_control_emb_ad11; /* EMB_AD11 pad ctrl reg */ - u32 io_control_emb_ad10; /* EMB_AD10 pad ctrl reg */ - u32 io_control_emb_ad09; /* EMB_AD09 pad ctrl reg */ - u32 io_control_emb_ad08; /* EMB_AD08 pad ctrl reg */ - u32 io_control_emb_ad07; /* EMB_AD07 pad ctrl reg */ - u32 io_control_emb_ad06; /* EMB_AD06 pad ctrl reg */ - u32 io_control_emb_ad05; /* EMB_AD05 pad ctrl reg */ - u32 io_control_emb_ad04; /* EMB_AD04 pad ctrl reg */ - u32 io_control_emb_ad03; /* EMB_AD03 pad ctrl reg */ - u32 io_control_emb_ad02; /* EMB_AD02 pad ctrl reg */ - u32 io_control_emb_ad01; /* EMB_AD01 pad ctrl reg */ - u32 io_control_emb_ad00; /* EMB_AD00 pad ctrl reg */ - u32 io_control_pata_ce1; /* PATA_CE1 pad ctrl reg */ - u32 io_control_pata_ce2; /* PATA_CE2 pad ctrl reg */ - u32 io_control_pata_isolate; /* PATA_ISOLATE pad ctrl reg */ - u32 io_control_pata_ior; /* PATA_IOR pad ctrl reg */ - u32 io_control_pata_iow; /* PATA_IOW pad ctrl reg */ - u32 io_control_pata_iochrdy; /* PATA_IOCHRDY pad ctrl reg */ - u32 io_control_pata_intrq; /* PATA_INTRQ pad ctrl reg */ - u32 io_control_pata_drq; /* PATA_DRQ pad ctrl reg */ - u32 io_control_pata_dack; /* PATA_DACK pad ctrl reg */ - u32 io_control_nfc_wp; /* NFC_WP pad ctrl reg */ - u32 io_control_nfc_rb; /* NFC_RB pad ctrl reg */ - u32 io_control_nfc_ale; /* NFC_ALE pad ctrl reg */ - u32 io_control_nfc_cle; /* NFC_CLE pad ctrl reg */ - u32 io_control_nfc_we; /* NFC_WE pad ctrl reg */ - u32 io_control_nfc_re; /* NFC_RE pad ctrl reg */ - u32 io_control_pci_ad31; /* PCI_AD31 pad ctrl reg */ - u32 io_control_pci_ad30; /* PCI_AD30 pad ctrl reg */ - u32 io_control_pci_ad29; /* PCI_AD29 pad ctrl reg */ - u32 io_control_pci_ad28; /* PCI_AD28 pad ctrl reg */ - u32 io_control_pci_ad27; /* PCI_AD27 pad ctrl reg */ - u32 io_control_pci_ad26; /* PCI_AD26 pad ctrl reg */ - u32 io_control_pci_ad25; /* PCI_AD25 pad ctrl reg */ - u32 io_control_pci_ad24; /* PCI_AD24 pad ctrl reg */ - u32 io_control_pci_ad23; /* PCI_AD23 pad ctrl reg */ - u32 io_control_pci_ad22; /* PCI_AD22 pad ctrl reg */ - u32 io_control_pci_ad21; /* PCI_AD21 pad ctrl reg */ - u32 io_control_pci_ad20; /* PCI_AD20 pad ctrl reg */ - u32 io_control_pci_ad19; /* PCI_AD19 pad ctrl reg */ - u32 io_control_pci_ad18; /* PCI_AD18 pad ctrl reg */ - u32 io_control_pci_ad17; /* PCI_AD17 pad ctrl reg */ - u32 io_control_pci_ad16; /* PCI_AD16 pad ctrl reg */ - u32 io_control_pci_ad15; /* PCI_AD15 pad ctrl reg */ - u32 io_control_pci_ad14; /* PCI_AD14 pad ctrl reg */ - u32 io_control_pci_ad13; /* PCI_AD13 pad ctrl reg */ - u32 io_control_pci_ad12; /* PCI_AD12 pad ctrl reg */ - u32 io_control_pci_ad11; /* PCI_AD11 pad ctrl reg */ - u32 io_control_pci_ad10; /* PCI_AD10 pad ctrl reg */ - u32 io_control_pci_ad09; /* PCI_AD09 pad ctrl reg */ - u32 io_control_pci_ad08; /* PCI_AD08 pad ctrl reg */ - u32 io_control_pci_ad07; /* PCI_AD07 pad ctrl reg */ - u32 io_control_pci_ad06; /* PCI_AD06 pad ctrl reg */ - u32 io_control_pci_ad05; /* PCI_AD05 pad ctrl reg */ - u32 io_control_pci_ad04; /* PCI_AD04 pad ctrl reg */ - u32 io_control_pci_ad03; /* PCI_AD03 pad ctrl reg */ - u32 io_control_pci_ad02; /* PCI_AD02 pad ctrl reg */ - u32 io_control_pci_ad01; /* PCI_AD01 pad ctrl reg */ - u32 io_control_pci_ad00; /* PCI_AD00 pad ctrl reg */ - u32 io_control_pci_cbe0; /* PCI_CBE0 pad ctrl reg */ - u32 io_control_pci_cbe1; /* PCI_CBE1 pad ctrl reg */ - u32 io_control_pci_cbe2; /* PCI_CBE2 pad ctrl reg */ - u32 io_control_pci_cbe3; /* PCI_CBE3 pad ctrl reg */ - u32 io_control_pci_grant2; /* PCI_GRANT2 pad ctrl reg */ - u32 io_control_pci_req2; /* PCI_REQ2 pad ctrl reg */ - u32 io_control_pci_grant1; /* PCI_GRANT1 pad ctrl reg */ - u32 io_control_pci_req1; /* PCI_REQ1 pad ctrl reg */ - u32 io_control_pci_grant0; /* PCI_GRANT0 pad ctrl reg */ - u32 io_control_pci_req0; /* PCI_REQ0 pad ctrl reg */ - u32 io_control_pci_inta; /* PCI_INTA pad ctrl reg */ - u32 io_control_pci_clk; /* PCI_CLK pad ctrl reg */ - u32 io_control_pci_rst; /* PCI_RST- pad ctrl reg */ - u32 io_control_pci_frame; /* PCI_FRAME pad ctrl reg */ - u32 io_control_pci_idsel; /* PCI_IDSEL pad ctrl reg */ - u32 io_control_pci_devsel; /* PCI_DEVSEL pad ctrl reg */ - u32 io_control_pci_irdy; /* PCI_IRDY pad ctrl reg */ - u32 io_control_pci_trdy; /* PCI_TRDY pad ctrl reg */ - u32 io_control_pci_stop; /* PCI_STOP pad ctrl reg */ - u32 io_control_pci_par; /* PCI_PAR pad ctrl reg */ - u32 io_control_pci_perr; /* PCI_PERR pad ctrl reg */ - u32 io_control_pci_serr; /* PCI_SERR pad ctrl reg */ - u32 io_control_spdif_txclk; /* SPDIF_TXCLK pad ctrl reg */ - u32 io_control_spdif_tx; /* SPDIF_TX pad ctrl reg */ - u32 io_control_spdif_rx; /* SPDIF_RX pad ctrl reg */ - u32 io_control_i2c0_scl; /* I2C0_SCL pad ctrl reg */ - u32 io_control_i2c0_sda; /* I2C0_SDA pad ctrl reg */ - u32 io_control_i2c1_scl; /* I2C1_SCL pad ctrl reg */ - u32 io_control_i2c1_sda; /* I2C1_SDA pad ctrl reg */ - u32 io_control_i2c2_scl; /* I2C2_SCL pad ctrl reg */ - u32 io_control_i2c2_sda; /* I2C2_SDA pad ctrl reg */ - u32 io_control_irq0; /* IRQ0 pad ctrl reg */ - u32 io_control_irq1; /* IRQ1 pad ctrl reg */ - u32 io_control_can1_tx; /* CAN1_TX pad ctrl reg */ - u32 io_control_can2_tx; /* CAN2_TX pad ctrl reg */ - u32 io_control_j1850_tx; /* J1850_TX pad ctrl reg */ - u32 io_control_j1850_rx; /* J1850_RX pad ctrl reg */ - u32 io_control_psc_mclk_in; /* PSC_MCLK_IN pad ctrl reg */ - u32 io_control_psc0_0; /* PSC0_0 pad ctrl reg */ - u32 io_control_psc0_1; /* PSC0_1 pad ctrl reg */ - u32 io_control_psc0_2; /* PSC0_2 pad ctrl reg */ - u32 io_control_psc0_3; /* PSC0_3 pad ctrl reg */ - u32 io_control_psc0_4; /* PSC0_4 pad ctrl reg */ - u32 io_control_psc1_0; /* PSC1_0 pad ctrl reg */ - u32 io_control_psc1_1; /* PSC1_1 pad ctrl reg */ - u32 io_control_psc1_2; /* PSC1_2 pad ctrl reg */ - u32 io_control_psc1_3; /* PSC1_3 pad ctrl reg */ - u32 io_control_psc1_4; /* PSC1_4 pad ctrl reg */ - u32 io_control_psc2_0; /* PSC2_0 pad ctrl reg */ - u32 io_control_psc2_1; /* PSC2_1 pad ctrl reg */ - u32 io_control_psc2_2; /* PSC2_2 pad ctrl reg */ - u32 io_control_psc2_3; /* PSC2_3 pad ctrl reg */ - u32 io_control_psc2_4; /* PSC2_4 pad ctrl reg */ - u32 io_control_psc3_0; /* PSC3_0 pad ctrl reg */ - u32 io_control_psc3_1; /* PSC3_1 pad ctrl reg */ - u32 io_control_psc3_2; /* PSC3_2 pad ctrl reg */ - u32 io_control_psc3_3; /* PSC3_3 pad ctrl reg */ - u32 io_control_psc3_4; /* PSC3_4 pad ctrl reg */ - u32 io_control_psc4_0; /* PSC4_0 pad ctrl reg */ - u32 io_control_psc4_1; /* PSC4_1 pad ctrl reg */ - u32 io_control_psc4_2; /* PSC4_2 pad ctrl reg */ - u32 io_control_psc4_3; /* PSC4_3 pad ctrl reg */ - u32 io_control_psc4_4; /* PSC4_4 pad ctrl reg */ - u32 io_control_psc5_0; /* PSC5_0 pad ctrl reg */ - u32 io_control_psc5_1; /* PSC5_1 pad ctrl reg */ - u32 io_control_psc5_2; /* PSC5_2 pad ctrl reg */ - u32 io_control_psc5_3; /* PSC5_3 pad ctrl reg */ - u32 io_control_psc5_4; /* PSC5_4 pad ctrl reg */ - u32 io_control_psc6_0; /* PSC6_0 pad ctrl reg */ - u32 io_control_psc6_1; /* PSC6_1 pad ctrl reg */ - u32 io_control_psc6_2; /* PSC6_2 pad ctrl reg */ - u32 io_control_psc6_3; /* PSC6_3 pad ctrl reg */ - u32 io_control_psc6_4; /* PSC6_4 pad ctrl reg */ - u32 io_control_psc7_0; /* PSC7_0 pad ctrl reg */ - u32 io_control_psc7_1; /* PSC7_1 pad ctrl reg */ - u32 io_control_psc7_2; /* PSC7_2 pad ctrl reg */ - u32 io_control_psc7_3; /* PSC7_3 pad ctrl reg */ - u32 io_control_psc7_4; /* PSC7_4 pad ctrl reg */ - u32 io_control_psc8_0; /* PSC8_0 pad ctrl reg */ - u32 io_control_psc8_1; /* PSC8_1 pad ctrl reg */ - u32 io_control_psc8_2; /* PSC8_2 pad ctrl reg */ - u32 io_control_psc8_3; /* PSC8_3 pad ctrl reg */ - u32 io_control_psc8_4; /* PSC8_4 pad ctrl reg */ - u32 io_control_psc9_0; /* PSC9_0 pad ctrl reg */ - u32 io_control_psc9_1; /* PSC9_1 pad ctrl reg */ - u32 io_control_psc9_2; /* PSC9_2 pad ctrl reg */ - u32 io_control_psc9_3; /* PSC9_3 pad ctrl reg */ - u32 io_control_psc9_4; /* PSC9_4 pad ctrl reg */ - u32 io_control_psc10_0; /* PSC10_0 pad ctrl reg */ - u32 io_control_psc10_1; /* PSC10_1 pad ctrl reg */ - u32 io_control_psc10_2; /* PSC10_2 pad ctrl reg */ - u32 io_control_psc10_3; /* PSC10_3 pad ctrl reg */ - u32 io_control_psc10_4; /* PSC10_4 pad ctrl reg */ - u32 io_control_psc11_0; /* PSC11_0 pad ctrl reg */ - u32 io_control_psc11_1; /* PSC11_1 pad ctrl reg */ - u32 io_control_psc11_2; /* PSC11_2 pad ctrl reg */ - u32 io_control_psc11_3; /* PSC11_3 pad ctrl reg */ - u32 io_control_psc11_4; /* PSC11_4 pad ctrl reg */ - u32 io_control_ckstp_out; /* CKSTP_OUT pad ctrl reg */ - u32 io_control_usb_phy_drvvbus; /* USB2_DRVVBUS pad ctrl reg */ - u8 reserved[0x0cfc]; /* fill to 4096 bytes size */ -} ioctrl512x_t; - -/* IO pin fields */ -#define IO_PIN_FMUX(v) ((v) << 7) /* pin function */ -#define IO_PIN_HOLD(v) ((v) << 5) /* hold time, pci only */ -#define IO_PIN_PUD(v) ((v) << 4) /* if PUE, 0=pull-down, 1=pull-up */ -#define IO_PIN_PUE(v) ((v) << 3) /* pull up/down enable */ -#define IO_PIN_ST(v) ((v) << 2) /* schmitt trigger */ -#define IO_PIN_DS(v) ((v)) /* slew rate */ - -typedef struct iopin_t { - int p_offset; /* offset from IOCTL_MEM_OFFSET */ - int nr_pins; /* number of pins to set this way */ - int bit_or; /* or in the value instead of overwrite */ - u_long val; /* value to write or or */ -}iopin_t; - -void iopin_initialize(iopin_t *,int); - -/* - * support to adjust individual parts of the IO pin setup - */ - -#define IO_PIN_OVER_EACH (1 << 0) /* for compatibility */ -#define IO_PIN_OVER_FMUX (1 << 1) -#define IO_PIN_OVER_HOLD (1 << 2) -#define IO_PIN_OVER_PULL (1 << 3) -#define IO_PIN_OVER_STRIG (1 << 4) -#define IO_PIN_OVER_DRVSTR (1 << 5) - -void iopin_initialize_bits(iopin_t *, int); - -/* - * IIM - */ -typedef struct iim512x { - u32 stat; /* IIM status register */ - u32 statm; /* IIM status IRQ mask */ - u32 err; /* IIM errors register */ - u32 emask; /* IIM error IRQ mask */ - u32 fctl; /* IIM fuse control register */ - u32 ua; /* IIM upper address register */ - u32 la; /* IIM lower address register */ - u32 sdat; /* IIM explicit sense data */ - u8 res0[0x08]; - u32 prg_p; /* IIM program protection register */ - u8 res1[0x10]; - u32 divide; /* IIM divide factor register */ - u8 res2[0x7c0]; - u32 fbac0; /* IIM fuse bank 0 prot (for Freescale use) */ - u32 fb0w0[0x1f]; /* IIM fuse bank 0 data (for Freescale use) */ - u8 res3[0x380]; - u32 fbac1; /* IIM fuse bank 1 protection */ - u32 fb1w1[0x01f]; /* IIM fuse bank 1 data */ - u8 res4[0x380]; -} iim512x_t; - -/* - * LPC - */ -typedef struct lpc512x { - u32 cs_cfg[8]; /* Chip Select N Configuration Registers - No dedicated entry for CS Boot as == CS0 */ - u32 cs_cr; /* Chip Select Control Register */ - u32 cs_sr; /* Chip Select Status Register */ - u32 cs_bcr; /* Chip Select Burst Control Register */ - u32 cs_dccr; /* Chip Select Deadcycle Control Register */ - u32 cs_hccr; /* Chip Select Holdcycle Control Register */ - u32 altr; /* Address Latch Timing Register */ - u8 res0[0xc8]; - u32 sclpc_psr; /* SCLPC Packet Size Register */ - u32 sclpc_sar; /* SCLPC Start Address Register */ - u32 sclpc_cr; /* SCLPC Control Register */ - u32 sclpc_er; /* SCLPC Enable Register */ - u32 sclpc_nar; /* SCLPC NextAddress Register */ - u32 sclpc_sr; /* SCLPC Status Register */ - u32 sclpc_bdr; /* SCLPC Bytes Done Register */ - u32 emb_scr; /* EMB Share Counter Register */ - u32 emb_pcr; /* EMB Pause Control Register */ - u8 res1[0x1c]; - u32 lpc_fdwr; /* LPC RX/TX FIFO Data Word Register */ - u32 lpc_fsr; /* LPC RX/TX FIFO Status Register */ - u32 lpc_cr; /* LPC RX/TX FIFO Control Register */ - u32 lpc_ar; /* LPC RX/TX FIFO Alarm Register */ - u8 res2[0xb0]; -} lpc512x_t; - -/* - * PATA - */ -typedef struct pata512x { - /* LOCAL Registers */ - u32 pata_time1; /* Time register 1: PIO and tx timing parameter */ - u32 pata_time2; /* Time register 2: PIO timing parameter */ - u32 pata_time3; /* Time register 3: PIO and MDMA timing parameter */ - u32 pata_time4; /* Time register 4: MDMA and UDMA timing parameter */ - u32 pata_time5; /* Time register 5: UDMA timing parameter */ - u32 pata_time6; /* Time register 6: UDMA timing parameter */ - u32 pata_fifo_data32; /* 32bit wide dataport to/from FIFO */ - u32 pata_fifo_data16; /* 16bit wide dataport to/from FIFO */ - u32 pata_fifo_fill; /* FIFO filling in halfwords (READONLY)*/ - u32 pata_ata_control; /* ATA Interface control register */ - u32 pata_irq_pending; /* Interrupt pending register (READONLY) */ - u32 pata_irq_enable; /* Interrupt enable register */ - u32 pata_irq_clear; /* Interrupt clear register (WRITEONLY)*/ - u32 pata_fifo_alarm; /* fifo alarm threshold */ - u32 res1[0x1A]; - /* DRIVE Registers */ - u32 pata_drive_data; /* drive data register*/ - u32 pata_drive_features;/* drive features register */ - u32 pata_drive_sectcnt; /* drive sector count register */ - u32 pata_drive_sectnum; /* drive sector number register */ - u32 pata_drive_cyllow; /* drive cylinder low register */ - u32 pata_drive_cylhigh; /* drive cylinder high register */ - u32 pata_drive_dev_head;/* drive device head register */ - u32 pata_drive_command; /* write = drive command, read = drive status reg */ - u32 res2[0x06]; - u32 pata_drive_alt_stat;/* write = drive control, read = drive alt status reg */ - u32 res3[0x09]; -} pata512x_t; - -/* - * PSC - */ -typedef struct psc512x { - volatile u8 mode; /* PSC + 0x00 */ - volatile u8 res0[3]; - union { /* PSC + 0x04 */ - volatile u16 status; - volatile u16 clock_select; - } sr_csr; -#define psc_status sr_csr.status -#define psc_clock_select sr_csr.clock_select - volatile u16 res1; - volatile u8 command; /* PSC + 0x08 */ - volatile u8 res2[3]; - union { /* PSC + 0x0c */ - volatile u8 buffer_8; - volatile u16 buffer_16; - volatile u32 buffer_32; - } buffer; -#define psc_buffer_8 buffer.buffer_8 -#define psc_buffer_16 buffer.buffer_16 -#define psc_buffer_32 buffer.buffer_32 - union { /* PSC + 0x10 */ - volatile u8 ipcr; - volatile u8 acr; - } ipcr_acr; -#define psc_ipcr ipcr_acr.ipcr -#define psc_acr ipcr_acr.acr - volatile u8 res3[3]; - union { /* PSC + 0x14 */ - volatile u16 isr; - volatile u16 imr; - } isr_imr; -#define psc_isr isr_imr.isr -#define psc_imr isr_imr.imr - volatile u16 res4; - volatile u8 ctur; /* PSC + 0x18 */ - volatile u8 res5[3]; - volatile u8 ctlr; /* PSC + 0x1c */ - volatile u8 res6[3]; - volatile u32 ccr; /* PSC + 0x20 */ - volatile u8 res7[12]; - volatile u8 ivr; /* PSC + 0x30 */ - volatile u8 res8[3]; - volatile u8 ip; /* PSC + 0x34 */ - volatile u8 res9[3]; - volatile u8 op1; /* PSC + 0x38 */ - volatile u8 res10[3]; - volatile u8 op0; /* PSC + 0x3c */ - volatile u8 res11[3]; - volatile u32 sicr; /* PSC + 0x40 */ - volatile u8 res12[60]; - volatile u32 tfcmd; /* PSC + 0x80 */ - volatile u32 tfalarm; /* PSC + 0x84 */ - volatile u32 tfstat; /* PSC + 0x88 */ - volatile u32 tfintstat; /* PSC + 0x8C */ - volatile u32 tfintmask; /* PSC + 0x90 */ - volatile u32 tfcount; /* PSC + 0x94 */ - volatile u16 tfwptr; /* PSC + 0x98 */ - volatile u16 tfrptr; /* PSC + 0x9A */ - volatile u32 tfsize; /* PSC + 0x9C */ - volatile u8 res13[28]; - union { /* PSC + 0xBC */ - volatile u8 buffer_8; - volatile u16 buffer_16; - volatile u32 buffer_32; - } tfdata_buffer; -#define tfdata_8 tfdata_buffer.buffer_8 -#define tfdata_16 tfdata_buffer.buffer_16 -#define tfdata_32 tfdata_buffer.buffer_32 - - volatile u32 rfcmd; /* PSC + 0xC0 */ - volatile u32 rfalarm; /* PSC + 0xC4 */ - volatile u32 rfstat; /* PSC + 0xC8 */ - volatile u32 rfintstat; /* PSC + 0xCC */ - volatile u32 rfintmask; /* PSC + 0xD0 */ - volatile u32 rfcount; /* PSC + 0xD4 */ - volatile u16 rfwptr; /* PSC + 0xD8 */ - volatile u16 rfrptr; /* PSC + 0xDA */ - volatile u32 rfsize; /* PSC + 0xDC */ - volatile u8 res18[28]; - union { /* PSC + 0xFC */ - volatile u8 buffer_8; - volatile u16 buffer_16; - volatile u32 buffer_32; - } rfdata_buffer; -#define rfdata_8 rfdata_buffer.buffer_8 -#define rfdata_16 rfdata_buffer.buffer_16 -#define rfdata_32 rfdata_buffer.buffer_32 -} psc512x_t; - -/* PSC FIFO Command values */ -#define PSC_FIFO_RESET_SLICE 0x80 -#define PSC_FIFO_ENABLE_SLICE 0x01 - -/* PSC FIFO Controller Command values */ -#define FIFOC_ENABLE_CLOCK_GATE 0x01 -#define FIFOC_DISABLE_CLOCK_GATE 0x00 - -/* PSC FIFO status */ -#define PSC_FIFO_EMPTY 0x01 - -/* PSC Command values */ -#define PSC_RX_ENABLE 0x01 -#define PSC_RX_DISABLE 0x02 -#define PSC_TX_ENABLE 0x04 -#define PSC_TX_DISABLE 0x08 -#define PSC_SEL_MODE_REG_1 0x10 -#define PSC_RST_RX 0x20 -#define PSC_RST_TX 0x30 -#define PSC_RST_ERR_STAT 0x40 -#define PSC_RST_BRK_CHG_INT 0x50 -#define PSC_START_BRK 0x60 -#define PSC_STOP_BRK 0x70 - -/* PSC status register bits */ -#define PSC_SR_CDE 0x0080 -#define PSC_SR_TXEMP 0x0800 -#define PSC_SR_OE 0x1000 -#define PSC_SR_PE 0x2000 -#define PSC_SR_FE 0x4000 -#define PSC_SR_RB 0x8000 - -/* PSC mode fields */ -#define PSC_MODE_5_BITS 0x00 -#define PSC_MODE_6_BITS 0x01 -#define PSC_MODE_7_BITS 0x02 -#define PSC_MODE_8_BITS 0x03 -#define PSC_MODE_PAREVEN 0x00 -#define PSC_MODE_PARODD 0x04 -#define PSC_MODE_PARFORCE 0x08 -#define PSC_MODE_PARNONE 0x10 -#define PSC_MODE_ENTIMEOUT 0x20 -#define PSC_MODE_RXRTS 0x80 -#define PSC_MODE_1_STOPBIT 0x07 - -/* - * FIFOC - */ -typedef struct fifoc512x { - u32 fifoc_cmd; - u32 fifoc_int; - u32 fifoc_dma; - u32 fifoc_axe; - u32 fifoc_debug; - u8 fixme[0xEC]; -} fifoc512x_t; - -/* - * Centralized FIFO Controller has internal memory for all 12 PSCs FIFOs - * - * NOTE: individual PSC units are free to use whatever area (and size) of the - * FIFOC internal memory, so make sure memory areas for FIFO slices used by - * different PSCs do not overlap! - * - * Overall size of FIFOC memory is not documented in the MPC5121e RM, but - * tests indicate that it is 1024 words total. - * - * *_TX_SIZE and *_RX_SIZE is the number of 4-byte words for FIFO slice. - */ -#define FIFOC_PSC0_TX_SIZE 0x04 -#define FIFOC_PSC0_TX_ADDR 0x0 -#define FIFOC_PSC0_RX_SIZE 0x04 -#define FIFOC_PSC0_RX_ADDR 0x10 - -#define FIFOC_PSC1_TX_SIZE 0x04 -#define FIFOC_PSC1_TX_ADDR 0x20 -#define FIFOC_PSC1_RX_SIZE 0x04 -#define FIFOC_PSC1_RX_ADDR 0x30 - -#define FIFOC_PSC2_TX_SIZE 0x04 -#define FIFOC_PSC2_TX_ADDR 0x40 -#define FIFOC_PSC2_RX_SIZE 0x04 -#define FIFOC_PSC2_RX_ADDR 0x50 - -#define FIFOC_PSC3_TX_SIZE 0x04 -#define FIFOC_PSC3_TX_ADDR 0x60 -#define FIFOC_PSC3_RX_SIZE 0x04 -#define FIFOC_PSC3_RX_ADDR 0x70 - -#define FIFOC_PSC4_TX_SIZE 0x04 -#define FIFOC_PSC4_TX_ADDR 0x80 -#define FIFOC_PSC4_RX_SIZE 0x04 -#define FIFOC_PSC4_RX_ADDR 0x90 - -#define FIFOC_PSC5_TX_SIZE 0x04 -#define FIFOC_PSC5_TX_ADDR 0xa0 -#define FIFOC_PSC5_RX_SIZE 0x04 -#define FIFOC_PSC5_RX_ADDR 0xb0 - -#define FIFOC_PSC6_TX_SIZE 0x04 -#define FIFOC_PSC6_TX_ADDR 0xc0 -#define FIFOC_PSC6_RX_SIZE 0x04 -#define FIFOC_PSC6_RX_ADDR 0xd0 - -#define FIFOC_PSC7_TX_SIZE 0x04 -#define FIFOC_PSC7_TX_ADDR 0xe0 -#define FIFOC_PSC7_RX_SIZE 0x04 -#define FIFOC_PSC7_RX_ADDR 0xf0 - -#define FIFOC_PSC8_TX_SIZE 0x04 -#define FIFOC_PSC8_TX_ADDR 0x100 -#define FIFOC_PSC8_RX_SIZE 0x04 -#define FIFOC_PSC8_RX_ADDR 0x110 - -#define FIFOC_PSC9_TX_SIZE 0x04 -#define FIFOC_PSC9_TX_ADDR 0x120 -#define FIFOC_PSC9_RX_SIZE 0x04 -#define FIFOC_PSC9_RX_ADDR 0x130 - -#define FIFOC_PSC10_TX_SIZE 0x04 -#define FIFOC_PSC10_TX_ADDR 0x140 -#define FIFOC_PSC10_RX_SIZE 0x04 -#define FIFOC_PSC10_RX_ADDR 0x150 - -#define FIFOC_PSC11_TX_SIZE 0x04 -#define FIFOC_PSC11_TX_ADDR 0x160 -#define FIFOC_PSC11_RX_SIZE 0x04 -#define FIFOC_PSC11_RX_ADDR 0x170 - -/* - * SATA - */ -typedef struct sata512x { - u8 fixme[0x2000]; -} sata512x_t; - -typedef struct immap { - sysconf512x_t sysconf; /* System configuration */ - u8 res0[0x700]; - wdt512x_t wdt; /* Watch Dog Timer (WDT) */ - rtclk512x_t rtc; /* Real Time Clock Module */ - gpt512x_t gpt; /* General Purpose Timer */ - ipic512x_t ipic; /* Integrated Programmable Interrupt Controller */ - arbiter512x_t arbiter; /* CSB Arbiter */ - reset512x_t reset; /* Reset Module */ - clk512x_t clk; /* Clock Module */ - pmc512x_t pmc; /* Power Management Control Module */ - gpio512x_t gpio; /* General purpose I/O module */ - u8 res1[0x100]; - mscan512x_t mscan; /* MSCAN */ - bdlc512x_t bdlc; /* BDLC */ - sdhc512x_t sdhc; /* SDHC */ - spdif512x_t spdif; /* SPDIF */ - i2c512x_t i2c; /* I2C Controllers */ - u8 res2[0x800]; - axe512x_t axe; /* AXE */ - diu512x_t diu; /* Display Interface Unit */ - cfm512x_t cfm; /* Clock Frequency Measurement */ - u8 res3[0x500]; - fec512x_t fec; /* Fast Ethernet Controller */ - ulpi512x_t ulpi; /* USB ULPI */ - u8 res4[0xa00]; - utmi512x_t utmi; /* USB UTMI */ - u8 res5[0x1000]; - pcidma512x_t pci_dma; /* PCI DMA */ - pciconf512x_t pci_conf; /* PCI Configuration */ - u8 res6[0x80]; - ios512x_t ios; /* PCI Sequencer */ - pcictrl512x_t pci_ctrl; /* PCI Controller Control and Status */ - u8 res7[0xa00]; - ddr512x_t mddrc; /* Multi-port DDR Memory Controller */ - ioctrl512x_t io_ctrl; /* IO Control */ - iim512x_t iim; /* IC Identification module */ - u8 res8[0x4000]; - lpc512x_t lpc; /* LocalPlus Controller */ - pata512x_t pata; /* Parallel ATA */ - u8 res9[0xd00]; - psc512x_t psc[12]; /* PSCs */ - u8 res10[0x300]; - fifoc512x_t fifoc; /* FIFO Controller */ - u8 res11[0x2000]; - dma512x_t dma; /* DMA */ - u8 res12[0xa800]; - sata512x_t sata; /* Serial ATA */ - u8 res13[0xde000]; -} immap_t; - -/* provide interface to get PATA base address */ -static inline u32 get_pata_base (void) -{ - volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; - return (u32)(&im->pata); -} -#endif /* __ASSEMBLY__ */ - -#define CONFIG_SYS_MPC512x_USB1_OFFSET 0x4000 -#define CONFIG_SYS_MPC512x_USB1_ADDR \ - (CONFIG_SYS_IMMR + CONFIG_SYS_MPC512x_USB1_OFFSET) - -#define IIM_BASE_ADDR (CONFIG_SYS_IMMR + offsetof(immap_t, iim)) - -#endif /* __IMMAP_512x__ */ diff --git a/arch/powerpc/include/asm/mpc512x.h b/arch/powerpc/include/asm/mpc512x.h deleted file mode 100644 index 9167a57544..0000000000 --- a/arch/powerpc/include/asm/mpc512x.h +++ /dev/null @@ -1,42 +0,0 @@ -/* - * include/asm-ppc/mpc512x.h - * - * Prototypes, etc. for the Freescale MPC512x embedded cpu chips - * - * 2009 (C) Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#ifndef __ASMPPC_MPC512X_H -#define __ASMPPC_MPC512X_H - -/* - * macros for manipulating CSx_START/STOP - */ -#define CSAW_START(start) ((start) & 0xFFFF0000) -#define CSAW_STOP(start, size) (((start) + (size) - 1) >> 16) - -/* - * Inlines - */ - -/* - * According to MPC5121e RM, configuring local access windows should - * be followed by a dummy read of the config register that was - * modified last and an isync. - */ -static inline void sync_law(volatile void *addr) -{ - in_be32(addr); - __asm__ __volatile__ ("isync"); -} - -/* - * Prototypes - */ -extern long int fixed_sdram(ddr512x_config_t *mddrc_config, - u32 *dram_init_seq, int seq_sz); -extern int mpc5121_diu_init(void); -extern void ide_set_reset(int idereset); - -#endif /* __ASMPPC_MPC512X_H */ diff --git a/arch/powerpc/include/asm/ppc.h b/arch/powerpc/include/asm/ppc.h index f34e859720..31fa7dbd2f 100644 --- a/arch/powerpc/include/asm/ppc.h +++ b/arch/powerpc/include/asm/ppc.h @@ -25,11 +25,6 @@ defined(CONFIG_MPC866_FAMILY) || defined(CONFIG_MPC885_FAMILY) # define CONFIG_MPC86x 1 #endif -#elif defined(CONFIG_MPC5xxx) -#include <mpc5xxx.h> -#elif defined(CONFIG_MPC512X) -#include <asm/immap_512x.h> -#endif #ifdef CONFIG_MPC86xx #include <mpc86xx.h> #include <asm/immap_86xx.h> @@ -58,9 +53,6 @@ #if defined(CONFIG_8xx) uint get_immr(uint); #endif -#if defined(CONFIG_MPC5xxx) -uint get_svr(void); -#endif uint get_pvr(void); uint get_svr(void); uint rd_ic_cst(void); @@ -71,7 +63,6 @@ void wr_dc_cst(uint); void wr_dc_adr(uint);
#if defined(CONFIG_4xx) || \ - defined(CONFIG_MPC5xxx) || \ defined(CONFIG_MPC85xx) || \ defined(CONFIG_MPC86xx) || \ defined(CONFIG_MPC83xx) @@ -100,10 +91,6 @@ void ddr_enable_ecc(unsigned int dram_size); #endif #endif
-#if defined(CONFIG_MPC5xxx) -int prt_mpc5xxx_clks(void); -#endif - #if defined(CONFIG_MPC85xx) typedef MPC85xx_SYS_INFO sys_info_t; void get_sys_info(sys_info_t *); diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile index 88adb26e2e..6bbb8ca14d 100644 --- a/arch/powerpc/lib/Makefile +++ b/arch/powerpc/lib/Makefile @@ -38,24 +38,6 @@ obj-$(CONFIG_CMD_KGDB) += kgdb.o obj-$(CONFIG_IDE) += ide.o obj-y += stack.o obj-y += time.o - -# Don't include the MPC5xxx special memcpy into the -# SPL U-Boot image. memcpy is used in the SPL NOR -# flash driver. And we need the real, fast memcpy -# here. We have no problems with unaligned access. -ifndef CONFIG_SPL_BUILD -# Workaround for local bus unaligned access problems -# on MPC512x and MPC5200 -ifdef CONFIG_MPC512X -AFLAGS_ppcstring.o += -Dmemcpy=__memcpy -obj-y += memcpy_mpc5200.o -endif -ifdef CONFIG_MPC5200 -AFLAGS_ppcstring.o += -Dmemcpy=__memcpy -obj-y += memcpy_mpc5200.o -endif -endif - endif # not minimal
ifdef CONFIG_SPL_BUILD diff --git a/arch/powerpc/lib/bootm.c b/arch/powerpc/lib/bootm.c index 17c5ed173c..42a6afbc31 100644 --- a/arch/powerpc/lib/bootm.c +++ b/arch/powerpc/lib/bootm.c @@ -283,10 +283,6 @@ static void set_clocks_in_mhz (bd_t *kbd) kbd->bi_sccfreq /= 1000000L; kbd->bi_vco /= 1000000L; #endif -#if defined(CONFIG_MPC5xxx) - kbd->bi_ipbfreq /= 1000000L; - kbd->bi_pcifreq /= 1000000L; -#endif /* CONFIG_MPC5xxx */ } }
diff --git a/arch/powerpc/lib/memcpy_mpc5200.c b/arch/powerpc/lib/memcpy_mpc5200.c deleted file mode 100644 index 7e5a005789..0000000000 --- a/arch/powerpc/lib/memcpy_mpc5200.c +++ /dev/null @@ -1,55 +0,0 @@ -/* - * (C) Copyright 2010 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * This is a workaround for issues on the MPC5200, where unaligned - * 32-bit-accesses to the local bus will deliver corrupted data. This - * happens for example when trying to use memcpy() from an odd NOR - * flash address; the behaviour can be also seen when using "md" on an - * odd NOR flash address (but there it is not a bug in U-Boot, which - * only shows the behaviour of this processor). - * - * For memcpy(), we test if either the source or the target address - * are not 32 bit aligned, and - if so - if the source address is in - * NOR flash: in this case we perform a byte-wise (slow) then; for - * aligned operations of non-flash areas we use the optimized (fast) - * real __memcpy(). This way we minimize the performance impact of - * this workaround. - * - */ - -#include <common.h> -#include <flash.h> -#include <linux/types.h> - -void *memcpy(void *trg, const void *src, size_t len) -{ - extern void* __memcpy(void *, const void *, size_t); - char *s = (char *)src; - char *t = (char *)trg; - void *dest = (void *)trg; - - /* - * Check is source address is in flash: - * If not, we use the fast assembler code - */ - if (((((unsigned long)s & 3) == 0) /* source aligned */ - && /* AND */ - (((unsigned long)t & 3) == 0)) /* target aligned, */ - || /* or */ - (addr2info((ulong)s) == NULL)) { /* source not in flash */ - return __memcpy(trg, src, len); - } - - /* - * Copying from flash, perform byte by byte copy. - */ - while (len-- > 0) - *t++ = *s++; - - return dest; -} diff --git a/board/a3m071/Kconfig b/board/a3m071/Kconfig deleted file mode 100644 index 444c450d8a..0000000000 --- a/board/a3m071/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -if TARGET_A3M071 - -config SYS_BOARD - default "a3m071" - -config SYS_CONFIG_NAME - default "a3m071" - -endif diff --git a/board/a3m071/MAINTAINERS b/board/a3m071/MAINTAINERS deleted file mode 100644 index 975107d2c0..0000000000 --- a/board/a3m071/MAINTAINERS +++ /dev/null @@ -1,7 +0,0 @@ -A3M071 BOARD -M: Stefan Roese sr@denx.de -S: Maintained -F: board/a3m071/ -F: include/configs/a3m071.h -F: configs/a3m071_defconfig -F: configs/a4m2k_defconfig diff --git a/board/a3m071/Makefile b/board/a3m071/Makefile deleted file mode 100644 index 4e31e33936..0000000000 --- a/board/a3m071/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := a3m071.o diff --git a/board/a3m071/README b/board/a3m071/README deleted file mode 100644 index 112c47b60d..0000000000 --- a/board/a3m071/README +++ /dev/null @@ -1,80 +0,0 @@ ------------------------------------------------------------------------- -A3M071 board support ------------------------------------------------------------------------- - - -SPL NOR flash support: ----------------------- -To boot fast into the OS (Linux), this board port integrates the SPL -framework. This means, that a special, stripped-down version of -U-Boot runs in the beginning. In the case of the A3M071 board, this -SPL U-Boot version is less than 16 KiB big. This SPL U-Boot can either -boot the OS (Linux) or a "real", full-blown U-Boot. This detection -on whether to boot Linux or U-Boot is done by using the "boot_os" -environment variable. If "boot_os" is set to "yes", Linux will be -loaded and booted from the SPL U-Boot version. Otherwise, the -full-blown U-Boot version will be loaded and run. - -Enabling Linux booting: ------------------------ -From U-Boot: -=> setenv boot_os yes -=> saveenv - -From Linux: -$ fw_setenv boot_os yes - -Enabling U-Boot booting: ------------------------- -From U-Boot: -=> setenv boot_os no -=> saveenv - -From Linux: -$ fw_setenv boot_os no - - -Preparing Linux image(s) for booting from SPL U-Boot: ------------------------------------------------------ -To boot the Linux kernel from the SPL, the DT blob (fdt) needs to get -prepard/patched first. U-Boot usually inserts some dynamic values into -the DT binary (blob), e.g. autodetected memory size, MAC addresses, -clocks speeds etc. To generate this patched DT blob, you can use -the following command: - -1. Load fdt blob to SDRAM: -=> tftp 1800000 a3m071/a3m071.dtb - -2. Set bootargs as desired for Linux booting (e.g. flash_mtd): -=> run mtdargs addip2 addtty - -3. Use "fdt" commands to patch the DT blob: -=> fdt addr 1800000 -=> fdt boardsetup -=> fdt chosen - -4. Display patched DT blob (optional): -=> fdt print - -5. Save fdt to NOR flash: -=> erase fc180000 fc07ffff -=> cp.b 1800000 fc180000 10000 - -All this can be integrated into an environment command: -=> setenv upd_fdt 'tftp 1800000 a3m071/a3m071.dtb;run mtdargs addip addtty; \ - fdt addr 1800000;fdt boardsetup;fdt chosen;erase fc180000 fc07ffff; \ - cp.b 1800000 fc180000 10000' -=> saveenv - -After this, only "run upd_fdt" needs to get called to load, patch -and save the DT blob into NOR flash. - -Additionally, the Linux kernel image has to be saved uncompressed in -its uImage file (and not gzip compressed). This can be done with this -command: - -$ mkimage -A ppc -O linux -T kernel -C none -a 0 -e 0 \ - -n "Linux Kernel Image" -d vmlinux.bin uImage.uncompressed - ------------------------------------------------------------------------- -Stefan Roese, 2012-08-23 diff --git a/board/a3m071/a3m071.c b/board/a3m071/a3m071.c deleted file mode 100644 index 7e16aaf4b2..0000000000 --- a/board/a3m071/a3m071.c +++ /dev/null @@ -1,479 +0,0 @@ -/* - * (C) Copyright 2003-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * (C) Copyright 2004 - * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com. - * - * (C) Copyright 2006 - * MicroSys GmbH - * - * Copyright 2012-2013 Stefan Roese sr@denx.de - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <command.h> -#include <mpc5xxx.h> -#include <pci.h> -#include <miiphy.h> -#include <linux/compiler.h> -#include <asm/processor.h> -#include <asm/io.h> - -#ifdef CONFIG_A4M2K -#include "is46r16320d.h" -#else -#include "mt46v16m16-75.h" -#endif - -DECLARE_GLOBAL_DATA_PTR; - -#if !defined(CONFIG_SYS_RAMBOOT) && \ - (defined(CONFIG_SPL) && defined(CONFIG_SPL_BUILD)) -static void sdram_start(int hi_addr) -{ - long hi_addr_bit = hi_addr ? 0x01000000 : 0; - long control = SDRAM_CONTROL | hi_addr_bit; - - /* unlock mode register */ - out_be32((void *)MPC5XXX_SDRAM_CTRL, control | 0x80000000); - - /* precharge all banks */ - out_be32((void *)MPC5XXX_SDRAM_CTRL, control | 0x80000002); - -#ifdef SDRAM_DDR - /* set mode register: extended mode */ - out_be32((void *)MPC5XXX_SDRAM_MODE, SDRAM_EMODE); - - /* set mode register: reset DLL */ - out_be32((void *)MPC5XXX_SDRAM_MODE, SDRAM_MODE | 0x04000000); -#endif - - /* precharge all banks */ - out_be32((void *)MPC5XXX_SDRAM_CTRL, control | 0x80000002); - - /* auto refresh */ - out_be32((void *)MPC5XXX_SDRAM_CTRL, control | 0x80000004); - - /* set mode register */ - out_be32((void *)MPC5XXX_SDRAM_MODE, SDRAM_MODE); - - /* normal operation */ - out_be32((void *)MPC5XXX_SDRAM_CTRL, control); - - /* - * Wait a short while for the DLL to lock before accessing - * the SDRAM - */ - udelay(100); -} -#endif - -/* - * ATTENTION: Although partially referenced dram_init does NOT make real use - * use of CONFIG_SYS_SDRAM_BASE. The code does not work if - * CONFIG_SYS_SDRAM_BASE is something else than 0x00000000. - */ -int dram_init(void) -{ - ulong dramsize = 0; - ulong dramsize2 = 0; - uint svr, pvr; -#if !defined(CONFIG_SYS_RAMBOOT) && \ - (defined(CONFIG_SPL) && defined(CONFIG_SPL_BUILD)) - ulong test1, test2; - - /* setup SDRAM chip selects */ - out_be32((void *)MPC5XXX_SDRAM_CS0CFG, 0x0000001e); /* 2GB at 0x0 */ - out_be32((void *)MPC5XXX_SDRAM_CS1CFG, 0x80000000); /* disabled */ - - /* setup config registers */ - out_be32((void *)MPC5XXX_SDRAM_CONFIG1, SDRAM_CONFIG1); - out_be32((void *)MPC5XXX_SDRAM_CONFIG2, SDRAM_CONFIG2); - -#ifdef SDRAM_DDR - /* set tap delay */ - out_be32((void *)MPC5XXX_CDM_PORCFG, SDRAM_TAPDELAY); -#endif - - /* find RAM size using SDRAM CS0 only */ - sdram_start(0); - test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000); - sdram_start(1); - test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000); - if (test1 > test2) { - sdram_start(0); - dramsize = test1; - } else { - dramsize = test2; - } - - /* memory smaller than 1MB is impossible */ - if (dramsize < (1 << 20)) - dramsize = 0; - - /* set SDRAM CS0 size according to the amount of RAM found */ - if (dramsize > 0) { - out_be32((void *)MPC5XXX_SDRAM_CS0CFG, - 0x13 + __builtin_ffs(dramsize >> 20) - 1); - } else { - out_be32((void *)MPC5XXX_SDRAM_CS0CFG, 0); /* disabled */ - } -#else /* CONFIG_SYS_RAMBOOT */ - - /* retrieve size of memory connected to SDRAM CS0 */ - dramsize = in_be32((void *)MPC5XXX_SDRAM_CS0CFG) & 0xFF; - if (dramsize >= 0x13) - dramsize = (1 << (dramsize - 0x13)) << 20; - else - dramsize = 0; - - /* retrieve size of memory connected to SDRAM CS1 */ - dramsize2 = in_be32((void *)MPC5XXX_SDRAM_CS1CFG) & 0xFF; - if (dramsize2 >= 0x13) - dramsize2 = (1 << (dramsize2 - 0x13)) << 20; - else - dramsize2 = 0; - -#endif /* CONFIG_SYS_RAMBOOT */ - - /* - * On MPC5200B we need to set the special configuration delay in the - * DDR controller. Please refer to Freescale's AN3221 "MPC5200B SDRAM - * Initialization and Configuration", 3.3.1 SDelay--MBAR + 0x0190: - * - * "The SDelay should be written to a value of 0x00000004. It is - * required to account for changes caused by normal wafer processing - * parameters." - */ - svr = get_svr(); - pvr = get_pvr(); - if ((SVR_MJREV(svr) >= 2) && (PVR_MAJ(pvr) == 1) && (PVR_MIN(pvr) == 4)) - out_be32((void *)MPC5XXX_SDRAM_SDELAY, 0x04); - - gd->ram_size = dramsize + dramsize2; - - return 0; -} - -static void get_revisions(int *failsavelevel, int *digiboardversion, - int *fpgaversion) -{ - struct mpc5xxx_gpt_0_7 *gpt = (struct mpc5xxx_gpt_0_7 *)MPC5XXX_GPT; - u8 val; - - /* read digitalboard-version from TMR[2..4] */ - val = 0; - val |= (gpt->gpt2.sr & (1 << (31 - 23))) ? (1) : 0; - val |= (gpt->gpt3.sr & (1 << (31 - 23))) ? (1 << 1) : 0; - val |= (gpt->gpt4.sr & (1 << (31 - 23))) ? (1 << 2) : 0; - *digiboardversion = val; - - /* - * A4M2K only supports digiboardversion. No failsavelevel and - * fpgaversion here. - */ -#if !defined(CONFIG_A4M2K) - /* - * Figure out failsavelevel - * see ticket dsvk#59 - */ - *failsavelevel = 0; /* 0=failsave, 1=board ok, 2=fpga ok */ - - if (*digiboardversion == 0) { - *failsavelevel = 1; /* digiboard-version ok */ - - /* read fpga-version from TMR[5..7] */ - val = 0; - val |= (gpt->gpt5.sr & (1 << (31 - 23))) ? (1) : 0; - val |= (gpt->gpt6.sr & (1 << (31 - 23))) ? (1 << 1) : 0; - val |= (gpt->gpt7.sr & (1 << (31 - 23))) ? (1 << 2) : 0; - *fpgaversion = val; - - if (*fpgaversion == 1) - *failsavelevel = 2; /* fpga-version ok */ - } -#endif -} - -/* - * This function is called from the SPL U-Boot version for - * early init stuff, that needs to be done for OS (e.g. Linux) - * booting. Doing it later in the real U-Boot would not work - * in case that the SPL U-Boot boots Linux directly. - */ -void spl_board_init(void) -{ - struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio *)MPC5XXX_GPIO; - struct mpc5xxx_mmap_ctl *mm = - (struct mpc5xxx_mmap_ctl *)CONFIG_SYS_MBAR; - -#if defined(CONFIG_A4M2K) - /* enable CS3 and CS5 (FPGA) */ - setbits_be32(&mm->ipbi_ws_ctrl, (1 << 19) | (1 << 21)); -#else - int digiboardversion; - int failsavelevel; - int fpgaversion; - u32 val; - - get_revisions(&failsavelevel, &digiboardversion, &fpgaversion); - - val = in_be32(&mm->ipbi_ws_ctrl); - - /* first clear bits 19..21 (CS3...5) */ - val &= ~((1 << 19) | (1 << 20) | (1 << 21)); - if (failsavelevel == 2) { - /* FPGA ok */ - val |= (1 << 19) | (1 << 21); - } - - if (failsavelevel >= 1) { - /* at least digiboard-version ok */ - val |= (1 << 20); - } - - /* And write new value back to register */ - out_be32(&mm->ipbi_ws_ctrl, val); - - - /* Setup pin multiplexing */ - if (failsavelevel == 2) { - /* fpga-version ok */ -#if defined(CONFIG_SYS_GPS_PORT_CONFIG_2) - out_be32(&gpio->port_config, CONFIG_SYS_GPS_PORT_CONFIG_2); -#endif - } else if (failsavelevel == 1) { - /* digiboard-version ok - fpga not */ -#if defined(CONFIG_SYS_GPS_PORT_CONFIG_1) - out_be32(&gpio->port_config, CONFIG_SYS_GPS_PORT_CONFIG_1); -#endif - } else { - /* full failsave-mode */ -#if defined(CONFIG_SYS_GPS_PORT_CONFIG) - out_be32(&gpio->port_config, CONFIG_SYS_GPS_PORT_CONFIG); -#endif - } -#endif - - /* - * Setup gpio_wkup_7 as watchdog AS INPUT to disable it - see - * ticket #60 - * - * MPC5XXX_WU_GPIO_DIR direction is already 0 (INPUT) - * set bit 0(msb) to 1 - */ - setbits_be32((void *)MPC5XXX_WU_GPIO_ENABLE, CONFIG_WDOG_GPIO_PIN); - -#if defined(CONFIG_A4M2K) - /* Setup USB[x] as MPCDiag[0..3] GPIO outputs */ - - /* set USB0,6,7,8 (MPCDiag[0..3]) direction to output */ - gpio->simple_ddr |= 1 << (31 - 15); - gpio->simple_ddr |= 1 << (31 - 14); - gpio->simple_ddr |= 1 << (31 - 13); - gpio->simple_ddr |= 1 << (31 - 12); - - /* enable USB0,6,7,8 (MPCDiag[0..3]) as GPIO */ - gpio->simple_gpioe |= 1 << (31 - 15); - gpio->simple_gpioe |= 1 << (31 - 14); - gpio->simple_gpioe |= 1 << (31 - 13); - gpio->simple_gpioe |= 1 << (31 - 12); - - /* Setup PSC2[0..2] as STSLED[0..2] GPIO outputs */ - - /* set PSC2[0..2] (STSLED[0..2]) direction to output */ - gpio->simple_ddr |= 1 << (31 - 27); - gpio->simple_ddr |= 1 << (31 - 26); - gpio->simple_ddr |= 1 << (31 - 25); - - /* enable PSC2[0..2] (STSLED[0..2]) as GPIO */ - gpio->simple_gpioe |= 1 << (31 - 27); - gpio->simple_gpioe |= 1 << (31 - 26); - gpio->simple_gpioe |= 1 << (31 - 25); - - /* Setup PSC6[2] as MRST2 self reset GPIO output */ - - /* set PSC6[2]/IRDA_TX (MRST2) direction to output */ - gpio->simple_ddr |= 1 << (31 - 3); - - /* set PSC6[2]/IRDA_TX (MRST2) output as open drain */ - gpio->simple_ode |= 1 << (31 - 3); - - /* set PSC6[2]/IRDA_TX (MRST2) output as default high */ - gpio->simple_dvo |= 1 << (31 - 3); - - /* enable PSC6[2]/IRDA_TX (MRST2) as GPIO */ - gpio->simple_gpioe |= 1 << (31 - 3); - - /* Setup PSC6[3] as HARNSSCD harness code GPIO input */ - - /* set PSC6[3]/IR_USB_CLK (HARNSSCD) direction to input */ - gpio->simple_ddr |= 0 << (31 - 2); - - /* enable PSC6[3]/IR_USB_CLK (HARNSSCD) as GPIO */ - gpio->simple_gpioe |= 1 << (31 - 2); -#else - /* setup GPIOs for status-leds if needed - see ticket #57 */ - if (failsavelevel > 0) { - /* digiboard-version is OK */ - /* LED is LOW ACTIVE - so deactivate by set output to 1 */ - gpio->simple_dvo |= 1 << (31 - 12); - gpio->simple_dvo |= 1 << (31 - 13); - /* set GPIO direction to output */ - gpio->simple_ddr |= 1 << (31 - 12); - gpio->simple_ddr |= 1 << (31 - 13); - /* open drain config is set to "normal output" at reset */ - /* gpio->simple_ode &=~ ( 1 << (31-12) ); */ - /* gpio->simple_ode &=~ ( 1 << (31-13) ); */ - /* enable as GPIO */ - gpio->simple_gpioe |= 1 << (31 - 12); - gpio->simple_gpioe |= 1 << (31 - 13); - } - - /* setup fpga irq - see ticket #65 */ - if (failsavelevel > 1) { - /* - * The main irq initialisation is done in interrupts.c - * mpc5xxx_init_irq - */ - struct mpc5xxx_intr *intr = - (struct mpc5xxx_intr *)(MPC5XXX_ICTL); - - setbits_be32(&intr->ctrl, 0x08C01801); - - /* - * The MBAR+0x0524 Bit 21:23 CSe are ignored here due to the - * already cleared (intr_ctrl) MBAR+0x0510 ECLR[0] bit above - */ - } -#endif -} - -int checkboard(void) -{ - int digiboardversion; - int failsavelevel; - int fpgaversion; - - get_revisions(&failsavelevel, &digiboardversion, &fpgaversion); - -#ifdef CONFIG_A4M2K - puts("Board: A4M2K\n"); - printf(" digiboard IO version %u\n", digiboardversion); -#else - puts("Board: A3M071\n"); - printf("Rev: failsave level %u\n", failsavelevel); - printf(" digiboard IO version %u\n", digiboardversion); - if (failsavelevel > 0) /* only if fpga-version red */ - printf(" fpga IO version %u\n", fpgaversion); -#endif - - return 0; -} - -/* miscellaneous platform dependent initialisations */ -int misc_init_r(void) -{ - /* adjust flash start and offset to detected values */ - gd->bd->bi_flashstart = flash_info[0].start[0]; - gd->bd->bi_flashoffset = 0; - - /* adjust mapping */ - out_be32((void *)MPC5XXX_BOOTCS_START, - START_REG(gd->bd->bi_flashstart)); - out_be32((void *)MPC5XXX_CS0_START, START_REG(gd->bd->bi_flashstart)); - out_be32((void *)MPC5XXX_BOOTCS_STOP, - STOP_REG(gd->bd->bi_flashstart, gd->bd->bi_flashsize)); - out_be32((void *)MPC5XXX_CS0_STOP, - STOP_REG(gd->bd->bi_flashstart, gd->bd->bi_flashsize)); - - return 0; -} - -#ifdef CONFIG_OF_BOARD_SETUP -int ft_board_setup(void *blob, bd_t *bd) -{ - ft_cpu_setup(blob, bd); - - return 0; -} -#endif /* CONFIG_OF_BOARD_SETUP */ - -#ifdef CONFIG_SPL_OS_BOOT -/* - * A3M071 specific implementation of spl_start_uboot() - * - * RETURN - * 0 if booting into OS is selected (default) - * 1 if booting into U-Boot is selected - */ -int spl_start_uboot(void) -{ - char s[8]; - - env_init(); - getenv_f("boot_os", s, sizeof(s)); - if ((s != NULL) && (*s == '1' || *s == 'y' || *s == 'Y' || - *s == 't' || *s == 'T')) - return 0; - - return 1; -} -#endif - -#if defined(CONFIG_HW_WATCHDOG) -static int watchdog_toggle; - -void hw_watchdog_reset(void) -{ - int val; - - /* - * Check if watchdog is enabled via user command - */ - if ((gd->flags & GD_FLG_RELOC) && watchdog_toggle) { - /* Set direction to output */ - setbits_be32((void *)MPC5XXX_WU_GPIO_DIR, CONFIG_WDOG_GPIO_PIN); - - /* - * Toggle watchdog output - */ - val = (in_be32((void *)MPC5XXX_WU_GPIO_DATA_O) & - CONFIG_WDOG_GPIO_PIN); - if (val) { - clrbits_be32((void *)MPC5XXX_WU_GPIO_DATA_O, - CONFIG_WDOG_GPIO_PIN); - } else { - setbits_be32((void *)MPC5XXX_WU_GPIO_DATA_O, - CONFIG_WDOG_GPIO_PIN); - } - } -} - -int do_wdog_toggle(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - if (argc != 2) - goto usage; - - if (strncmp(argv[1], "on", 2) == 0) - watchdog_toggle = 1; - else if (strncmp(argv[1], "off", 3) == 0) - watchdog_toggle = 0; - else - goto usage; - - return 0; -usage: - printf("Usage: wdogtoggle %s\n", cmdtp->usage); - return 1; -} - -U_BOOT_CMD( - wdogtoggle, CONFIG_SYS_MAXARGS, 2, do_wdog_toggle, - "toggle GPIO pin to service watchdog", - "[on/off] - Switch watchdog toggling via GPIO pin on/off" -); -#endif diff --git a/board/a3m071/is46r16320d.h b/board/a3m071/is46r16320d.h deleted file mode 100644 index 981359f22b..0000000000 --- a/board/a3m071/is46r16320d.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * (C) Copyright 2004 - * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#define SDRAM_DDR /* is DDR */ - -#if defined(CONFIG_MPC5200) -/* Settings for XLB = 132 MHz */ -/* see is46r16320d datasheet and MPC5200UM chap. 8.6.1. */ - -/* SDRAM Config Standard timing */ -#define SDRAM_MODE 0x008d0000 -#define SDRAM_EMODE 0x40010000 -#define SDRAM_CONTROL 0x70430f00 -#define SDRAM_CONFIG1 0x33622930 -#define SDRAM_CONFIG2 0x46670000 -#define SDRAM_TAPDELAY 0x10000000 - -#else -#error CONFIG_MPC5200 not defined -#endif diff --git a/board/a3m071/mt46v16m16-75.h b/board/a3m071/mt46v16m16-75.h deleted file mode 100644 index 8f428306fe..0000000000 --- a/board/a3m071/mt46v16m16-75.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * (C) Copyright 2004 - * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#define SDRAM_DDR /* is DDR */ - -#if defined(CONFIG_MPC5200) -/* Settings for XLB = 132 MHz */ -#define SDRAM_MODE 0x018D0000 -#define SDRAM_EMODE 0x40090000 -#define SDRAM_CONTROL 0x704f0f00 -#define SDRAM_CONFIG1 0x73722930 -#define SDRAM_CONFIG2 0x47770000 -#define SDRAM_TAPDELAY 0x10000000 - -#else -#error CONFIG_MPC5200 not defined -#endif diff --git a/board/a4m072/Kconfig b/board/a4m072/Kconfig deleted file mode 100644 index ba5447fb9a..0000000000 --- a/board/a4m072/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -if TARGET_A4M072 - -config SYS_BOARD - default "a4m072" - -config SYS_CONFIG_NAME - default "a4m072" - -endif diff --git a/board/a4m072/MAINTAINERS b/board/a4m072/MAINTAINERS deleted file mode 100644 index 83dc59e87f..0000000000 --- a/board/a4m072/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -A4M072 BOARD -M: Sergei Poselenov sposelenov@emcraft.com -S: Maintained -F: board/a4m072/ -F: include/configs/a4m072.h -F: configs/a4m072_defconfig diff --git a/board/a4m072/Makefile b/board/a4m072/Makefile deleted file mode 100644 index 2a40e5799e..0000000000 --- a/board/a4m072/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2003-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := a4m072.o diff --git a/board/a4m072/a4m072.c b/board/a4m072/a4m072.c deleted file mode 100644 index 6f0d4489a2..0000000000 --- a/board/a4m072/a4m072.c +++ /dev/null @@ -1,479 +0,0 @@ -/* - * (C) Copyright 2003 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * (C) Copyright 2004 - * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com. - * - * (C) Copyright 2010 - * Sergei Poselenov, Emcraft Systems, sposelenov@emcraft.com. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <mpc5xxx.h> -#include <pci.h> -#include <asm/processor.h> -#include <asm/io.h> -#include <libfdt.h> -#include <netdev.h> -#include <led-display.h> -#include <linux/err.h> - -#include "mt46v32m16.h" - -DECLARE_GLOBAL_DATA_PTR; - -#ifndef CONFIG_SYS_RAMBOOT -static void sdram_start (int hi_addr) -{ - long hi_addr_bit = hi_addr ? 0x01000000 : 0; - long control = SDRAM_CONTROL | hi_addr_bit; - - /* unlock mode register */ - out_be32((void *)MPC5XXX_SDRAM_CTRL, control | 0x80000000); - __asm__ volatile ("sync"); - - /* precharge all banks */ - out_be32((void *)MPC5XXX_SDRAM_CTRL, control | 0x80000002); - __asm__ volatile ("sync"); - -#if SDRAM_DDR - /* set mode register: extended mode */ - out_be32((void *)MPC5XXX_SDRAM_MODE, SDRAM_EMODE); - __asm__ volatile ("sync"); - - /* set mode register: reset DLL */ - out_be32((void *)MPC5XXX_SDRAM_MODE, SDRAM_MODE | 0x04000000); - __asm__ volatile ("sync"); -#endif - - /* precharge all banks */ - out_be32((void *)MPC5XXX_SDRAM_CTRL, control | 0x80000002); - __asm__ volatile ("sync"); - - /* auto refresh */ - out_be32((void *)MPC5XXX_SDRAM_CTRL, control | 0x80000004); - __asm__ volatile ("sync"); - - /* set mode register */ - out_be32((void *)MPC5XXX_SDRAM_MODE, SDRAM_MODE); - __asm__ volatile ("sync"); - - /* normal operation */ - out_be32((void *)MPC5XXX_SDRAM_CTRL, control); - __asm__ volatile ("sync"); -} -#endif - -/* - * ATTENTION: Although partially referenced dram_init does NOT make real use - * use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE - * is something else than 0x00000000. - */ - -int dram_init(void) -{ - ulong dramsize = 0; - uint svr, pvr; - -#ifndef CONFIG_SYS_RAMBOOT - ulong test1, test2; - - /* setup SDRAM chip selects */ - out_be32((void *)MPC5XXX_SDRAM_CS0CFG, 0x0000001e); /* 2GB at 0x0 */ - out_be32((void *)MPC5XXX_SDRAM_CS1CFG, 0x80000000); /* disabled */ - __asm__ volatile ("sync"); - - /* setup config registers */ - out_be32((void *)MPC5XXX_SDRAM_CONFIG1, SDRAM_CONFIG1); - out_be32((void *)MPC5XXX_SDRAM_CONFIG2, SDRAM_CONFIG2); - __asm__ volatile ("sync"); - -#if SDRAM_DDR - /* set tap delay */ - out_be32((void *)MPC5XXX_CDM_PORCFG, SDRAM_TAPDELAY); - __asm__ volatile ("sync"); -#endif - - /* find RAM size using SDRAM CS0 only */ - sdram_start(0); - test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000); - sdram_start(1); - test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000); - if (test1 > test2) { - sdram_start(0); - dramsize = test1; - } else { - dramsize = test2; - } - - /* memory smaller than 1MB is impossible */ - if (dramsize < (1 << 20)) { - dramsize = 0; - } - - /* set SDRAM CS0 size according to the amount of RAM found */ - if (dramsize > 0) { - out_be32((void *)MPC5XXX_SDRAM_CS0CFG, - 0x13 + __builtin_ffs(dramsize >> 20) - 1); - } else { - out_be32((void *)MPC5XXX_SDRAM_CS0CFG, 0); /* disabled */ - } - -#else /* CONFIG_SYS_RAMBOOT */ - - /* retrieve size of memory connected to SDRAM CS0 */ - dramsize = in_be32((void *)MPC5XXX_SDRAM_CS0CFG) & 0xFF; - if (dramsize >= 0x13) { - dramsize = (1 << (dramsize - 0x13)) << 20; - } else { - dramsize = 0; - } - -#endif /* CONFIG_SYS_RAMBOOT */ - - /* - * On MPC5200B we need to set the special configuration delay in the - * DDR controller. Please refer to Freescale's AN3221 "MPC5200B SDRAM - * Initialization and Configuration", 3.3.1 SDelay--MBAR + 0x0190: - * - * "The SDelay should be written to a value of 0x00000004. It is - * required to account for changes caused by normal wafer processing - * parameters." - */ - svr = get_svr(); - pvr = get_pvr(); - if ((SVR_MJREV(svr) >= 2) && - (PVR_MAJ(pvr) == 1) && (PVR_MIN(pvr) == 4)) { - - out_be32((void *)MPC5XXX_SDRAM_SDELAY, 0x04); - __asm__ volatile ("sync"); - } - - gd->ram_size = dramsize; - - return 0; -} - -int checkboard (void) -{ - puts ("Board: A4M072\n"); - return 0; -} - -#ifdef CONFIG_PCI -static struct pci_controller hose; - -extern void pci_mpc5xxx_init(struct pci_controller *); - -void pci_init_board(void) -{ - pci_mpc5xxx_init(&hose); -} -#endif - -#ifdef CONFIG_OF_BOARD_SETUP -int ft_board_setup(void *blob, bd_t *bd) -{ - ft_cpu_setup(blob, bd); - - return 0; -} -#endif /* CONFIG_OF_BOARD_SETUP */ - -int board_eth_init(bd_t *bis) -{ - int rv, num_if = 0; - - /* Initialize TSECs first */ - if ((rv = cpu_eth_init(bis)) >= 0) - num_if += rv; - else - printf("ERROR: failed to initialize FEC.\n"); - - if ((rv = pci_eth_init(bis)) >= 0) - num_if += rv; - else - printf("ERROR: failed to initialize PCI Ethernet.\n"); - - return num_if; -} -/* - * Miscellaneous late-boot configurations - * - * Initialize EEPROM write-protect GPIO pin. - */ -int misc_init_r(void) -{ -#if defined(CONFIG_SYS_EEPROM_WREN) - /* Enable GPIO pin */ - setbits_be32((void *)MPC5XXX_WU_GPIO_ENABLE, CONFIG_SYS_EEPROM_WP); - /* Set direction, output */ - setbits_be32((void *)MPC5XXX_WU_GPIO_DIR, CONFIG_SYS_EEPROM_WP); - /* De-assert write enable */ - setbits_be32((void *)MPC5XXX_WU_GPIO_DATA_O, CONFIG_SYS_EEPROM_WP); -#endif - return 0; -} -#if defined(CONFIG_SYS_EEPROM_WREN) -/* Input: <dev_addr> I2C address of EEPROM device to enable. - * <state> -1: deliver current state - * 0: disable write - * 1: enable write - * Returns: -1: wrong device address - * 0: dis-/en- able done - * 0/1: current state if <state> was -1. - */ -int eeprom_write_enable (unsigned dev_addr, int state) -{ - if (CONFIG_SYS_I2C_EEPROM_ADDR != dev_addr) { - return -1; - } else { - switch (state) { - case 1: - /* Enable write access */ - clrbits_be32((void *)MPC5XXX_WU_GPIO_DATA_O, CONFIG_SYS_EEPROM_WP); - state = 0; - break; - case 0: - /* Disable write access */ - setbits_be32((void *)MPC5XXX_WU_GPIO_DATA_O, CONFIG_SYS_EEPROM_WP); - state = 0; - break; - default: - /* Read current status back. */ - state = (0 == (in_be32((void *)MPC5XXX_WU_GPIO_DATA_O) & - CONFIG_SYS_EEPROM_WP)); - break; - } - } - return state; -} -#endif - -#ifdef CONFIG_CMD_DISPLAY -#define DISPLAY_BUF_SIZE 2 -static u8 display_buf[DISPLAY_BUF_SIZE]; -static u8 display_putc_pos; -static u8 display_out_pos; - -void display_set(int cmd) { - - if (cmd & DISPLAY_CLEAR) { - display_buf[0] = display_buf[1] = 0; - } - - if (cmd & DISPLAY_HOME) { - display_putc_pos = 0; - } -} - -#define SEG_A (1<<0) -#define SEG_B (1<<1) -#define SEG_C (1<<2) -#define SEG_D (1<<3) -#define SEG_E (1<<4) -#define SEG_F (1<<5) -#define SEG_G (1<<6) -#define SEG_P (1<<7) -#define SEG__ 0 - -/* - * +- A -+ - * | | - * F B - * | | - * +- G -+ - * | | - * E C - * | | - * +- D -+ P - * - * 0..9 index 0..9 - * A..Z index 10..35 - * - index 36 - * _ index 37 - * . index 38 - */ - -#define SYMBOL_DASH (36) -#define SYMBOL_UNDERLINE (37) -#define SYMBOL_DOT (38) - -static u8 display_char2seg7_tbl[]= -{ - SEG_A | SEG_B | SEG_C | SEG_D | SEG_E | SEG_F, /* 0 */ - SEG_B | SEG_C, /* 1 */ - SEG_A | SEG_B | SEG_D | SEG_E | SEG_G, /* 2 */ - SEG_A | SEG_B | SEG_C | SEG_D | SEG_G, /* 3 */ - SEG_B | SEG_C | SEG_F | SEG_G, /* 4 */ - SEG_A | SEG_C | SEG_D | SEG_F | SEG_G, /* 5 */ - SEG_A | SEG_C | SEG_D | SEG_E | SEG_F | SEG_G, /* 6 */ - SEG_A | SEG_B | SEG_C, /* 7 */ - SEG_A | SEG_B | SEG_C | SEG_D | SEG_E | SEG_F | SEG_G, /* 8 */ - SEG_A | SEG_B | SEG_C | SEG_D | SEG_F | SEG_G, /* 9 */ - SEG_A | SEG_B | SEG_C | SEG_E | SEG_F | SEG_G, /* A */ - SEG_C | SEG_D | SEG_E | SEG_F | SEG_G, /* b */ - SEG_A | SEG_D | SEG_E | SEG_F, /* C */ - SEG_B | SEG_C | SEG_D | SEG_E | SEG_G, /* d */ - SEG_A | SEG_D | SEG_E | SEG_F | SEG_G, /* E */ - SEG_A | SEG_E | SEG_F | SEG_G, /* F */ - 0, /* g - not displayed */ - SEG_B | SEG_C | SEG_E | SEG_F | SEG_G, /* H */ - SEG_B | SEG_C, /* I */ - 0, /* J - not displayed */ - 0, /* K - not displayed */ - SEG_D | SEG_E | SEG_F, /* L */ - 0, /* m - not displayed */ - 0, /* n - not displayed */ - SEG_A | SEG_B | SEG_C | SEG_D | SEG_E | SEG_F, /* O */ - SEG_A | SEG_B | SEG_E | SEG_F | SEG_G, /* P */ - 0, /* q - not displayed */ - 0, /* r - not displayed */ - SEG_A | SEG_C | SEG_D | SEG_F | SEG_G, /* S */ - SEG_D | SEG_E | SEG_F | SEG_G, /* t */ - SEG_B | SEG_C | SEG_D | SEG_E | SEG_F, /* U */ - 0, /* V - not displayed */ - 0, /* w - not displayed */ - 0, /* X - not displayed */ - SEG_B | SEG_C | SEG_D | SEG_F | SEG_G, /* Y */ - 0, /* Z - not displayed */ - SEG_G, /* - */ - SEG_D, /* _ */ - SEG_P /* . */ -}; - -/* Convert char to the LED segments representation */ -static u8 display_char2seg7(char c) -{ - u8 val = 0; - - if (c >= '0' && c <= '9') - c -= '0'; - else if (c >= 'a' && c <= 'z') - c -= 'a' - 10; - else if (c >= 'A' && c <= 'Z') - c -= 'A' - 10; - else if (c == '-') - c = SYMBOL_DASH; - else if (c == '_') - c = SYMBOL_UNDERLINE; - else if (c == '.') - c = SYMBOL_DOT; - else - c = ' '; /* display unsupported symbols as space */ - - if (c != ' ') - val = display_char2seg7_tbl[(int)c]; - - return val; -} - -int display_putc(char c) -{ - if (display_putc_pos >= DISPLAY_BUF_SIZE) - return -1; - - display_buf[display_putc_pos++] = display_char2seg7(c); - /* one-symbol message should be steady */ - if (display_putc_pos == 1) - display_buf[display_putc_pos] = display_char2seg7(c); - - return c; -} - -/* - * Flush current symbol to the LED display hardware - */ -static inline void display_flush(void) -{ - u32 val = display_buf[display_out_pos]; - - val |= (val << 8) | (val << 16) | (val << 24); - out_be32((void *)CONFIG_SYS_DISP_CHR_RAM, val); -} - -/* - * Output contents of the software display buffer to the LED display every 0.5s - */ -void board_show_activity(ulong timestamp) -{ - static ulong last; - static u8 once; - - if (!once || (timestamp - last >= (CONFIG_SYS_HZ / 2))) { - display_flush(); - display_out_pos ^= 1; - last = timestamp; - once = 1; - } -} - -/* - * Empty fake function - */ -void show_activity(int arg) -{ -} -#endif -#if defined (CONFIG_SHOW_BOOT_PROGRESS) -static int a4m072_status2code(int status, char *buf) -{ - char c = 0; - - if (((status > 0) && (status <= 8)) || - ((status >= 100) && (status <= 108)) || - ((status < 0) && (status >= -9)) || - (status == -100) || (status == -101) || - ((status <= -103) && (status >= -113))) { - c = '5'; - } else if (((status >= 9) && (status <= 14)) || - ((status >= 120) && (status <= 123)) || - ((status >= 125) && (status <= 129)) || - ((status >= -13) && (status <= -10)) || - (status == -120) || (status == -122) || - ((status <= -124) && (status >= -127)) || - (status == -129)) { - c = '8'; - } else if (status == 15) { - c = '9'; - } else if ((status <= -30) && (status >= -32)) { - c = 'A'; - } else if (((status <= -35) && (status >= -40)) || - ((status <= -42) && (status >= -51)) || - ((status <= -53) && (status >= -58)) || - (status == -64) || - ((status <= -80) && (status >= -83)) || - (status == -130) || (status == -140) || - (status == -150)) { - c = 'B'; - } - - if (c == 0) - return -EINVAL; - - buf[0] = (status < 0) ? '-' : c; - buf[1] = c; - - return 0; -} - -void show_boot_progress(int status) -{ - char buf[2]; - - if (a4m072_status2code(status, buf) < 0) - return; - - display_putc(buf[0]); - display_putc(buf[1]); - display_set(DISPLAY_HOME); - display_out_pos = 0; /* reset output position */ - - /* we want to flush status 15 now */ - if (status == BOOTSTAGE_ID_RUN_OS) - display_flush(); -} -#endif diff --git a/board/a4m072/mt46v32m16.h b/board/a4m072/mt46v32m16.h deleted file mode 100644 index c0a08a8452..0000000000 --- a/board/a4m072/mt46v32m16.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * (C) Copyright 2004 - * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#define SDRAM_DDR 1 /* is DDR */ - -#if defined(CONFIG_MPC5200) -/* Settings for XLB = 132 MHz */ -#define SDRAM_MODE 0x018D0000 -#define SDRAM_EMODE 0x40010000 -#define SDRAM_CONTROL 0x704f0f00 -#define SDRAM_CONFIG1 0x73722930 -#define SDRAM_CONFIG2 0x47770000 -#define SDRAM_TAPDELAY 0x10000000 - -#else -#error CONFIG_MPC5200 not defined -#endif diff --git a/board/canmb/Kconfig b/board/canmb/Kconfig deleted file mode 100644 index b5cf2057f4..0000000000 --- a/board/canmb/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -if TARGET_CANMB - -config SYS_BOARD - default "canmb" - -config SYS_CONFIG_NAME - default "canmb" - -endif diff --git a/board/canmb/MAINTAINERS b/board/canmb/MAINTAINERS deleted file mode 100644 index 71750ead47..0000000000 --- a/board/canmb/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -CANMB BOARD -#M: - -S: Maintained -F: board/canmb/ -F: include/configs/canmb.h -F: configs/canmb_defconfig diff --git a/board/canmb/Makefile b/board/canmb/Makefile deleted file mode 100644 index 4286a9123c..0000000000 --- a/board/canmb/Makefile +++ /dev/null @@ -1,9 +0,0 @@ -# -# (C) Copyright 2005-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := canmb.o - diff --git a/board/canmb/canmb.c b/board/canmb/canmb.c deleted file mode 100644 index 54de0e2673..0000000000 --- a/board/canmb/canmb.c +++ /dev/null @@ -1,187 +0,0 @@ -/* - * (C) Copyright 2005 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * (C) Copyright 2004 - * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <mpc5xxx.h> -#include <pci.h> - -#if defined(CONFIG_MPC5200_DDR) -#include "mt46v16m16-75.h" -#else -#include "mt48lc16m32s2-75.h" -#endif - -DECLARE_GLOBAL_DATA_PTR; - -#ifndef CONFIG_SYS_RAMBOOT -static void sdram_start (int hi_addr) -{ - long hi_addr_bit = hi_addr ? 0x01000000 : 0; - - /* unlock mode register */ - *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000000 | hi_addr_bit; - __asm__ volatile ("sync"); - - /* precharge all banks */ - *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit; - __asm__ volatile ("sync"); - -#if SDRAM_DDR - /* set mode register: extended mode */ - *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_EMODE; - __asm__ volatile ("sync"); - - /* set mode register: reset DLL */ - *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE | 0x04000000; - __asm__ volatile ("sync"); -#endif - - /* precharge all banks */ - *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit; - __asm__ volatile ("sync"); - - /* auto refresh */ - *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 | hi_addr_bit; - __asm__ volatile ("sync"); - - /* set mode register */ - *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE; - __asm__ volatile ("sync"); - - /* normal operation */ - *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit; - __asm__ volatile ("sync"); -} -#endif - -/* - * ATTENTION: Although partially referenced dram_init does NOT make real use - * use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE - * is something else than 0x00000000. - */ - -int dram_init(void) -{ - ulong dramsize = 0; - ulong dramsize2 = 0; -#ifndef CONFIG_SYS_RAMBOOT - ulong test1, test2; - - /* setup SDRAM chip selects */ - *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001e;/* 2G at 0x0 */ - *(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x80000000;/* disabled */ - __asm__ volatile ("sync"); - - /* setup config registers */ - *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1; - *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2; - __asm__ volatile ("sync"); - -#if SDRAM_DDR - /* set tap delay */ - *(vu_long *)MPC5XXX_CDM_PORCFG = SDRAM_TAPDELAY; - __asm__ volatile ("sync"); -#endif - - /* find RAM size using SDRAM CS0 only */ - sdram_start(0); - test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000); - sdram_start(1); - test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000); - if (test1 > test2) { - sdram_start(0); - dramsize = test1; - } else { - dramsize = test2; - } - - /* memory smaller than 1MB is impossible */ - if (dramsize < (1 << 20)) { - dramsize = 0; - } - - /* set SDRAM CS0 size according to the amount of RAM found */ - if (dramsize > 0) { - *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 + __builtin_ffs(dramsize >> 20) - 1; - } else { - *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */ - } - - /* let SDRAM CS1 start right after CS0 */ - *(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize + 0x0000001e;/* 2G */ - - /* find RAM size using SDRAM CS1 only */ - if (!dramsize) - sdram_start(0); - test2 = test1 = get_ram_size((long *)(CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000); - if (!dramsize) { - sdram_start(1); - test2 = get_ram_size((long *)(CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000); - } - if (test1 > test2) { - sdram_start(0); - dramsize2 = test1; - } else { - dramsize2 = test2; - } - - /* memory smaller than 1MB is impossible */ - if (dramsize2 < (1 << 20)) { - dramsize2 = 0; - } - - /* set SDRAM CS1 size according to the amount of RAM found */ - if (dramsize2 > 0) { - *(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize - | (0x13 + __builtin_ffs(dramsize2 >> 20) - 1); - } else { - *(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */ - } - -#else /* CONFIG_SYS_RAMBOOT */ - - /* retrieve size of memory connected to SDRAM CS0 */ - dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF; - if (dramsize >= 0x13) { - dramsize = (1 << (dramsize - 0x13)) << 20; - } else { - dramsize = 0; - } - - /* retrieve size of memory connected to SDRAM CS1 */ - dramsize2 = *(vu_long *)MPC5XXX_SDRAM_CS1CFG & 0xFF; - if (dramsize2 >= 0x13) { - dramsize2 = (1 << (dramsize2 - 0x13)) << 20; - } else { - dramsize2 = 0; - } - -#endif /* CONFIG_SYS_RAMBOOT */ - - gd->ram_size = dramsize + dramsize2; - - return 0; -} - -int checkboard (void) -{ - puts ("Board: CANMB\n"); - return 0; -} - -int board_early_init_r (void) -{ - *(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */ - *(vu_long *)MPC5XXX_BOOTCS_START = - *(vu_long *)MPC5XXX_CS0_START = START_REG(CONFIG_SYS_FLASH_BASE); - *(vu_long *)MPC5XXX_BOOTCS_STOP = - *(vu_long *)MPC5XXX_CS0_STOP = STOP_REG(CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_SIZE); - return 0; -} diff --git a/board/canmb/mt48lc16m32s2-75.h b/board/canmb/mt48lc16m32s2-75.h deleted file mode 100644 index 0133eaa2ca..0000000000 --- a/board/canmb/mt48lc16m32s2-75.h +++ /dev/null @@ -1,14 +0,0 @@ -/* - * (C) Copyright 2004 - * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#define SDRAM_DDR 0 /* is SDR */ - -/* Settings for XLB = 132 MHz */ -#define SDRAM_MODE 0x00CD0000 -#define SDRAM_CONTROL 0x504F0000 -#define SDRAM_CONFIG1 0xD2322800 -#define SDRAM_CONFIG2 0x8AD70000 diff --git a/board/cm5200/Kconfig b/board/cm5200/Kconfig deleted file mode 100644 index ccea5c96e4..0000000000 --- a/board/cm5200/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -if TARGET_CM5200 - -config SYS_BOARD - default "cm5200" - -config SYS_CONFIG_NAME - default "cm5200" - -endif diff --git a/board/cm5200/MAINTAINERS b/board/cm5200/MAINTAINERS deleted file mode 100644 index 1e1df3f6dc..0000000000 --- a/board/cm5200/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -CM5200 BOARD -#M: - -S: Maintained -F: board/cm5200/ -F: include/configs/cm5200.h -F: configs/cm5200_defconfig diff --git a/board/cm5200/Makefile b/board/cm5200/Makefile deleted file mode 100644 index 76f8b9fc05..0000000000 --- a/board/cm5200/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2003-2007 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := cm5200.o cmd_cm5200.o fwupdate.o diff --git a/board/cm5200/cm5200.c b/board/cm5200/cm5200.c deleted file mode 100644 index 0c647bbd3d..0000000000 --- a/board/cm5200/cm5200.c +++ /dev/null @@ -1,355 +0,0 @@ -/* - * (C) Copyright 2003-2007 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * (C) Copyright 2004 - * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com. - * - * (C) Copyright 2004-2005 - * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de - * - * Adapted to U-Boot 1.2 by: - * Bartlomiej Sieka tur@semihalf.com: - * - HW ID readout from EEPROM - * - module detection - * Grzegorz Bernacki gjb@semihalf.com: - * - run-time SDRAM controller configuration - * - LIBFDT support - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <mpc5xxx.h> -#include <pci.h> -#include <asm/processor.h> -#include <i2c.h> -#include <linux/ctype.h> - -#ifdef CONFIG_OF_LIBFDT -#include <libfdt.h> -#include <fdt_support.h> -#endif /* CONFIG_OF_LIBFDT */ - - -#include "cm5200.h" -#include "fwupdate.h" - -DECLARE_GLOBAL_DATA_PTR; - -static hw_id_t hw_id; - - -#ifndef CONFIG_SYS_RAMBOOT -/* - * Helper function to initialize SDRAM controller. - */ -static void sdram_start(int hi_addr, mem_conf_t *mem_conf) -{ - long hi_addr_bit = hi_addr ? 0x01000000 : 0; - - /* unlock mode register */ - *(vu_long *)MPC5XXX_SDRAM_CTRL = mem_conf->control | 0x80000000 | - hi_addr_bit; - - /* precharge all banks */ - *(vu_long *)MPC5XXX_SDRAM_CTRL = mem_conf->control | 0x80000002 | - hi_addr_bit; - - /* auto refresh */ - *(vu_long *)MPC5XXX_SDRAM_CTRL = mem_conf->control | 0x80000004 | - hi_addr_bit; - - /* auto refresh, second time */ - *(vu_long *)MPC5XXX_SDRAM_CTRL = mem_conf->control | 0x80000004 | - hi_addr_bit; - - /* set mode register */ - *(vu_long *)MPC5XXX_SDRAM_MODE = mem_conf->mode; - - /* normal operation */ - *(vu_long *)MPC5XXX_SDRAM_CTRL = mem_conf->control | hi_addr_bit; -} -#endif /* CONFIG_SYS_RAMBOOT */ - - -/* - * Retrieve memory configuration for a given module. board_type is the index - * in hw_id_list[] corresponding to the module we are executing on; we return - * SDRAM controller settings approprate for this module. - */ -static mem_conf_t* get_mem_config(int board_type) -{ - switch(board_type){ - case CM1_QA: - return memory_config[0]; - case CM11_QA: - case CMU1_QA: - return memory_config[1]; - default: - printf("ERROR: Unknown module, using a default SDRAM " - "configuration - things may not work!!!.\n"); - return memory_config[0]; - } -} - - -/* - * Initalize SDRAM - configure SDRAM controller, detect memory size. - */ -int dram_init(void) -{ - ulong dramsize = 0; -#ifndef CONFIG_SYS_RAMBOOT - ulong test1, test2; - mem_conf_t *mem_conf; - - mem_conf = get_mem_config(gd->board_type); - - /* configure SDRAM start/end for detection */ - *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001e; /* 2G at 0x0 */ - - /* setup config registers */ - *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = mem_conf->config1; - *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = mem_conf->config2; - - sdram_start(0, mem_conf); - test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000); - sdram_start(1, mem_conf); - test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000); - if (test1 > test2) { - sdram_start(0, mem_conf); - dramsize = test1; - } else - dramsize = test2; - - /* memory smaller than 1MB is impossible */ - if (dramsize < (1 << 20)) - dramsize = 0; - - /* set SDRAM CS0 size according to the amount of RAM found */ - if (dramsize > 0) { - *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 + - __builtin_ffs(dramsize >> 20) - 1; - } else - *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */ -#else /* CONFIG_SYS_RAMBOOT */ - /* retrieve size of memory connected to SDRAM CS0 */ - dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF; - if (dramsize >= 0x13) - dramsize = (1 << (dramsize - 0x13)) << 20; - else - dramsize = 0; -#endif /* !CONFIG_SYS_RAMBOOT */ - - /* - * On MPC5200B we need to set the special configuration delay in the - * DDR controller. Refer to chapter 8.7.5 SDelay--MBAR + 0x0190 of - * the MPC5200B User's Manual. - */ - *(vu_long *)MPC5XXX_SDRAM_SDELAY = 0x04; - __asm__ volatile ("sync"); - - gd->ram_size = dramsize; - - return 0; -} - - -/* - * Read module hardware identification data from the I2C EEPROM. - */ -static void read_hw_id(hw_id_t hw_id) -{ - printf("ERROR: can't read HW ID from EEPROM\n"); -} - - -/* - * Identify module we are running on, set gd->board_type to the index in - * hw_id_list[] corresponding to the module identifed, or to - * CM5200_UNKNOWN_MODULE if we can't identify the module. - */ -static void identify_module(hw_id_t hw_id) -{ - int i, j, element; - char match; - gd->board_type = CM5200_UNKNOWN_MODULE; - for (i = 0; i < sizeof (hw_id_list) / sizeof (char **); ++i) { - match = 1; - for (j = 0; j < sizeof (hw_id_identify) / sizeof (int); ++j) { - element = hw_id_identify[j]; - if (strncmp(hw_id_list[i][element], - &hw_id[element][0], - hw_id_format[element].length) != 0) { - match = 0; - break; - } - } - if (match) { - gd->board_type = i; - break; - } - } -} - - -/* - * Compose string with module name. - * buf is assumed to have enough space, and be null-terminated. - */ -static void compose_module_name(hw_id_t hw_id, char *buf) -{ - char tmp[MODULE_NAME_MAXLEN]; - strncat(buf, &hw_id[PCB_NAME][0], hw_id_format[PCB_NAME].length); - strncat(buf, ".", 1); - strncat(buf, &hw_id[FORM][0], hw_id_format[FORM].length); - strncat(buf, &hw_id[VERSION][0], hw_id_format[VERSION].length); - strncat(buf, " (", 2); - strncat(buf, &hw_id[IDENTIFICATION_NUMBER][0], - hw_id_format[IDENTIFICATION_NUMBER].length); - sprintf(tmp, " / %u.%u)", - hw_id[MAJOR_SW_VERSION][0], - hw_id[MINOR_SW_VERSION][0]); - strcat(buf, tmp); -} - -#if defined(CONFIG_SYS_I2C_SOFT) -/* - * Compose string with hostname. - * buf is assumed to have enough space, and be null-terminated. - */ -static void compose_hostname(hw_id_t hw_id, char *buf) -{ - char *p; - strncat(buf, &hw_id[PCB_NAME][0], hw_id_format[PCB_NAME].length); - strncat(buf, "_", 1); - strncat(buf, &hw_id[FORM][0], hw_id_format[FORM].length); - strncat(buf, &hw_id[VERSION][0], hw_id_format[VERSION].length); - for (p = buf; *p; ++p) - *p = tolower(*p); - -} -#endif - -#ifdef CONFIG_OF_BOARD_SETUP -/* - * Update 'model' and 'memory' properties in the blob according to the module - * that we are running on. - */ -static void ft_blob_update(void *blob, bd_t *bd) -{ - int len, ret, nodeoffset = 0; - char module_name[MODULE_NAME_MAXLEN] = {0}; - - compose_module_name(hw_id, module_name); - len = strlen(module_name) + 1; - - ret = fdt_setprop(blob, nodeoffset, "model", module_name, len); - if (ret < 0) - printf("ft_blob_update(): cannot set /model property err:%s\n", - fdt_strerror(ret)); -} -#endif /* CONFIG_OF_BOARD_SETUP */ - - -/* - * Read HW ID from I2C EEPROM and detect the modue we are running on. Note - * that we need to use local variable for readout, because global data is not - * writable yet (and we'll have to redo the readout later on). - */ -int checkboard(void) -{ - hw_id_t hw_id_tmp; - char module_name_tmp[MODULE_NAME_MAXLEN] = ""; - - read_hw_id(hw_id_tmp); - identify_module(hw_id_tmp); /* this sets gd->board_type */ - compose_module_name(hw_id_tmp, module_name_tmp); - - if (gd->board_type != CM5200_UNKNOWN_MODULE) - printf("Board: %s\n", module_name_tmp); - else - printf("Board: unrecognized cm5200 module (%s)\n", - module_name_tmp); - - return 0; -} - - -int board_early_init_r(void) -{ - /* - * Now, when we are in RAM, enable flash write access for detection - * process. Note that CS_BOOT cannot be cleared when executing in - * flash. - */ - *(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */ - - /* Now that we can write to global data, read HW ID again. */ - read_hw_id(hw_id); - return 0; -} - - -#ifdef CONFIG_MISC_INIT_R -int misc_init_r(void) -{ -#if defined(CONFIG_SYS_I2C_SOFT) - uchar buf[6]; - char str[18]; - char hostname[MODULE_NAME_MAXLEN]; - - /* Read ethaddr from EEPROM */ - if (i2c_read(CONFIG_SYS_I2C_EEPROM, CONFIG_MAC_OFFSET, 2, buf, 6) == 0) { - sprintf(str, "%02X:%02X:%02X:%02X:%02X:%02X", - buf[0], buf[1], buf[2], buf[3], buf[4], buf[5]); - /* Check if MAC addr is owned by Schindler */ - if (strstr(str, "00:06:C3") != str) - printf(LOG_PREFIX "Warning - Illegal MAC address (%s)" - " in EEPROM.\n", str); - else { - printf(LOG_PREFIX "Using MAC (%s) from I2C EEPROM\n", - str); - setenv("ethaddr", str); - } - } else { - printf(LOG_PREFIX "Warning - Unable to read MAC from I2C" - " device at address %02X:%04X\n", CONFIG_SYS_I2C_EEPROM, - CONFIG_MAC_OFFSET); - } - hostname[0] = 0x00; - /* set the hostname appropriate to the module we're running on */ - compose_hostname(hw_id, hostname); - setenv("hostname", hostname); - -#endif /* defined(CONFIG_SYS_I2C_SOFT) */ - if (!getenv("ethaddr")) - printf(LOG_PREFIX "MAC address not set, networking is not " - "operational\n"); - - return 0; -} -#endif /* CONFIG_MISC_INIT_R */ - - -#ifdef CONFIG_LAST_STAGE_INIT -int last_stage_init(void) -{ -#ifdef CONFIG_USB_STORAGE - cm5200_fwupdate(); -#endif /* CONFIG_USB_STORAGE */ - return 0; -} -#endif /* CONFIG_LAST_STAGE_INIT */ - - -#ifdef CONFIG_OF_BOARD_SETUP -int ft_board_setup(void *blob, bd_t *bd) -{ - ft_cpu_setup(blob, bd); - ft_blob_update(blob, bd); - - return 0; -} -#endif /* CONFIG_OF_BOARD_SETUP */ diff --git a/board/cm5200/cm5200.h b/board/cm5200/cm5200.h deleted file mode 100644 index c2573f3bf6..0000000000 --- a/board/cm5200/cm5200.h +++ /dev/null @@ -1,171 +0,0 @@ -/* - * (C) Copyright 2007 DENX Software Engineering - * - * Author: Bartlomiej Sieka tur@semihalf.com - * Author: Grzegorz Bernacki gjb@semihalf.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef _CM5200_H -#define _CM5200_H - - -/* - * Definitions and declarations for the modules of the cm5200 platform. Mostly - * related to reading the hardware identification data (HW ID) from the I2C - * EEPROM, detection of the particular module we are executing on, and - * appropriate SDRAM controller initialization. - */ - - -#define CM5200_UNKNOWN_MODULE 0xffffffff - -enum { - DEVICE_NAME, /* 0 */ - GENERATION, /* 1 */ - PCB_NAME, /* 2 */ - FORM, /* 3 */ - VERSION, /* 4 */ - IDENTIFICATION_NUMBER, /* 5 */ - MAJOR_SW_VERSION, /* 6 */ - MINOR_SW_VERSION, /* 7 */ - /* add new alements above this line */ - HW_ID_ELEM_COUNT /* count */ -}; - -/* - * Sect. 4.1 "CM1.Q/CMU1.Q Supervisory Microcontroller Interface Definition" - */ - -#define DEVICE_NAME_OFFSET 0x02 -#define GENERATION_OFFSET 0x0b -#define PCB_NAME_OFFSET 0x0c -#define FORM_OFFSET 0x15 -#define VERSION_OFFSET 0x16 -#define IDENTIFICATION_NUMBER_OFFSET 0x19 -#define MAJOR_SW_VERSION_OFFSET 0x0480 -#define MINOR_SW_VERSION_OFFSET 0x0481 - - -#define DEVICE_NAME_LEN 0x09 -#define GENERATION_LEN 0x01 -#define PCB_NAME_LEN 0x09 -#define FORM_LEN 0x01 -#define VERSION_LEN 0x03 -#define IDENTIFICATION_NUMBER_LEN 0x09 -#define MAJOR_SW_VERSION_LEN 0x01 -#define MINOR_SW_VERSION_LEN 0x01 - -#define HW_ID_ELEM_MAXLEN 0x09 /* MAX(XXX_LEN) */ - -/* entire HW ID in EEPROM is 64 bytes, so longer module name is unlikely */ -#define MODULE_NAME_MAXLEN 64 - - -/* storage for HW ID read from EEPROM */ -typedef char hw_id_t[HW_ID_ELEM_COUNT][HW_ID_ELEM_MAXLEN]; - - -/* HW ID layout in EEPROM */ -static struct { - unsigned int offset; - unsigned int length; -} hw_id_format[HW_ID_ELEM_COUNT] = { - {DEVICE_NAME_OFFSET, DEVICE_NAME_LEN}, - {GENERATION_OFFSET, GENERATION_LEN}, - {PCB_NAME_OFFSET, PCB_NAME_LEN}, - {FORM_OFFSET, FORM_LEN}, - {VERSION_OFFSET, VERSION_LEN}, - {IDENTIFICATION_NUMBER_OFFSET, IDENTIFICATION_NUMBER_LEN}, - {MAJOR_SW_VERSION_OFFSET, MAJOR_SW_VERSION_LEN}, - {MINOR_SW_VERSION_OFFSET, MINOR_SW_VERSION_LEN}, -}; - - -/* HW ID data found in EEPROM on supported modules */ -static char *cm1_qa_hw_id[HW_ID_ELEM_COUNT] = { - "CM", /* DEVICE_NAME */ - "1", /* GENERATION */ - "CM1", /* PCB_NAME */ - "Q", /* FORM */ - "A", /* VERSION */ - "591881", /* IDENTIFICATION_NUMBER */ - "", /* MAJOR_SW_VERSION */ - "", /* MINOR_SW_VERSION */ -}; - -static char *cm11_qa_hw_id[HW_ID_ELEM_COUNT] = { - "CM", /* DEVICE_NAME */ - "1", /* GENERATION */ - "CM11", /* PCB_NAME */ - "Q", /* FORM */ - "A", /* VERSION */ - "594200", /* IDENTIFICATION_NUMBER */ - "", /* MAJOR_SW_VERSION */ - "", /* MINOR_SW_VERSION */ -}; - -static char *cmu1_qa_hw_id[HW_ID_ELEM_COUNT] = { - "CMU", /* DEVICE_NAME */ - "1", /* GENERATION */ - "CMU1", /* PCB_NAME */ - "Q", /* FORM */ - "A", /* VERSION */ - "594128", /* IDENTIFICATION_NUMBER */ - "", /* MAJOR_SW_VERSION */ - "", /* MINOR_SW_VERSION */ -}; - - -/* list of known modules */ -static char **hw_id_list[] = { - cm1_qa_hw_id, - cm11_qa_hw_id, - cmu1_qa_hw_id, -}; - -/* indices to the above list - keep in sync */ -enum { - CM1_QA, - CM11_QA, - CMU1_QA, -}; - - -/* identify modules based on these hw id elements */ -static int hw_id_identify[] = { - PCB_NAME, - FORM, - VERSION, -}; - - -/* Registers' settings for SDRAM controller intialization */ -typedef struct { - ulong mode; - ulong control; - ulong config1; - ulong config2; -} mem_conf_t; - -static mem_conf_t k4s561632E = { - 0x00CD0000, /* CASL 3, burst length 8 */ - 0x514F0000, - 0xE2333900, - 0x8EE70000 -}; - -static mem_conf_t mt48lc32m16a2 = { - 0x00CD0000, /* CASL 3, burst length 8 */ - 0x514F0000, - 0xD2322800, - 0x8AD70000 -}; - -static mem_conf_t* memory_config[] = { - &k4s561632E, - &mt48lc32m16a2 -}; - -#endif /* _CM5200_H */ diff --git a/board/cm5200/cmd_cm5200.c b/board/cm5200/cmd_cm5200.c deleted file mode 100644 index 60097dc8c7..0000000000 --- a/board/cm5200/cmd_cm5200.c +++ /dev/null @@ -1,402 +0,0 @@ -/* - * (C) Copyright 2007 Markus Kappeler markus.kappeler@objectxp.com - * - * Adapted for U-Boot 1.2 by Piotr Kruszynski ppk@semihalf.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <command.h> -#include <i2c.h> -#include <usb.h> - -#ifdef CONFIG_CMD_BSP - -static int do_usb_test(char * const argv[]) -{ - int i; - static int usb_stor_curr_dev = -1; /* current device */ - - printf("Starting USB Test\n" - "Please insert USB Memmory Stick\n\n" - "Please press any key to start\n\n"); - getc(); - - usb_stop(); - printf("(Re)start USB...\n"); - i = usb_init(); -#ifdef CONFIG_USB_STORAGE - /* try to recognize storage devices immediately */ - if (i >= 0) - usb_stor_curr_dev = usb_stor_scan(1); -#endif /* CONFIG_USB_STORAGE */ - if (usb_stor_curr_dev >= 0) - printf("Found USB Storage Dev continue with Test...\n"); - else { - printf("No USB Storage Device detected.. Stop Test\n"); - return 1; - } - - usb_stor_info(); - - printf("stopping USB..\n"); - usb_stop(); - - return 0; -} - -static int do_led_test(char * const argv[]) -{ - int i = 0; - struct mpc5xxx_gpt_0_7 *gpt = (struct mpc5xxx_gpt_0_7 *)MPC5XXX_GPT; - - printf("Starting LED Test\n" - "Please set Switch S500 all off\n\n" - "Please press any key to start\n\n"); - getc(); - - /* configure timer 2-3 for simple GPIO output High */ - gpt->gpt2.emsr |= 0x00000034; - gpt->gpt3.emsr |= 0x00000034; - - (*(vu_long *)MPC5XXX_WU_GPIO_ENABLE) |= 0x80000000; - (*(vu_long *)MPC5XXX_WU_GPIO_DIR) |= 0x80000000; - printf("Please press any key to stop\n\n"); - while (!tstc()) { - if (i == 1) { - (*(vu_long *)MPC5XXX_WU_GPIO_DATA_O) |= 0x80000000; - gpt->gpt2.emsr &= ~0x00000010; - gpt->gpt3.emsr &= ~0x00000010; - } else if (i == 2) { - (*(vu_long *)MPC5XXX_WU_GPIO_DATA_O) &= ~0x80000000; - gpt->gpt2.emsr &= ~0x00000010; - gpt->gpt3.emsr |= 0x00000010; - } else if (i >= 3) { - (*(vu_long *)MPC5XXX_WU_GPIO_DATA_O) &= ~0x80000000; - gpt->gpt3.emsr &= ~0x00000010; - gpt->gpt2.emsr |= 0x00000010; - i = 0; - } - i++; - udelay(200000); - } - getc(); - - (*(vu_long *)MPC5XXX_WU_GPIO_DATA_O) |= 0x80000000; - gpt->gpt2.emsr |= 0x00000010; - gpt->gpt3.emsr |= 0x00000010; - - return 0; -} - -static int do_rs232_test(char * const argv[]) -{ - int error_status = 0; - struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio *)MPC5XXX_GPIO; - struct mpc5xxx_psc *psc1 = (struct mpc5xxx_psc *)MPC5XXX_PSC1; - - /* Configure PSC 2-3-6 as GPIO */ - gpio->port_config &= 0xFF0FF80F; - - switch (simple_strtoul(argv[2], NULL, 10)) { - case 1: - /* check RTS <-> CTS loop */ - /* set rts to 0 */ - printf("Uart 1 test: RX TX tested by using U-Boot\n" - "Please connect RTS with CTS on Uart1 plug\n\n" - "Press any key to start\n\n"); - getc(); - - psc1->op1 |= 0x01; - - /* wait some time before requesting status */ - udelay(10); - - /* check status at cts */ - if ((psc1->ip & 0x01) != 0) { - error_status = 3; - printf("%s: failure at rs232_1, cts status is %d " - "(should be 0)\n", - __FUNCTION__, (psc1->ip & 0x01)); - } - - /* set rts to 1 */ - psc1->op0 |= 0x01; - - /* wait some time before requesting status */ - udelay(10); - - /* check status at cts */ - if ((psc1->ip & 0x01) != 1) { - error_status = 3; - printf("%s: failure at rs232_1, cts status is %d " - "(should be 1)\n", - __FUNCTION__, (psc1->ip & 0x01)); - } - break; - case 2: - /* set PSC2_0, PSC2_2 as output and PSC2_1, PSC2_3 as input */ - printf("Uart 2 test: Please use RS232 Loopback plug on UART2\n" - "\nPress any key to start\n\n"); - getc(); - - gpio->simple_gpioe &= ~(0x000000F0); - gpio->simple_gpioe |= 0x000000F0; - gpio->simple_ddr &= ~(0x000000F0); - gpio->simple_ddr |= 0x00000050; - - /* check TXD <-> RXD loop */ - /* set TXD to 1 */ - gpio->simple_dvo |= (1 << 4); - - /* wait some time before requesting status */ - udelay(10); - - if ((gpio->simple_ival & 0x00000020) != 0x00000020) { - error_status = 2; - printf("%s: failure at rs232_2, rxd status is %d " - "(should be 1)\n", __FUNCTION__, - (gpio->simple_ival & 0x00000020) >> 5); - } - - /* set TXD to 0 */ - gpio->simple_dvo &= ~(1 << 4); - - /* wait some time before requesting status */ - udelay(10); - - if ((gpio->simple_ival & 0x00000020) != 0x00000000) { - error_status = 2; - printf("%s: failure at rs232_2, rxd status is %d " - "(should be 0)\n", __FUNCTION__, - (gpio->simple_ival & 0x00000020) >> 5); - } - - /* check RTS <-> CTS loop */ - /* set RTS to 1 */ - gpio->simple_dvo |= (1 << 6); - - /* wait some time before requesting status */ - udelay(10); - - if ((gpio->simple_ival & 0x00000080) != 0x00000080) { - error_status = 3; - printf("%s: failure at rs232_2, cts status is %d " - "(should be 1)\n", __FUNCTION__, - (gpio->simple_ival & 0x00000080) >> 7); - } - - /* set RTS to 0 */ - gpio->simple_dvo &= ~(1 << 6); - - /* wait some time before requesting status */ - udelay(10); - - if ((gpio->simple_ival & 0x00000080) != 0x00000000) { - error_status = 3; - printf("%s: failure at rs232_2, cts status is %d " - "(should be 0)\n", __FUNCTION__, - (gpio->simple_ival & 0x00000080) >> 7); - } - break; - case 3: - /* set PSC3_0, PSC3_2 as output and PSC3_1, PSC3_3 as input */ - printf("Uart 3 test: Please use RS232 Loopback plug on UART2\n" - "\nPress any key to start\n\n"); - getc(); - - gpio->simple_gpioe &= ~(0x00000F00); - gpio->simple_gpioe |= 0x00000F00; - - gpio->simple_ddr &= ~(0x00000F00); - gpio->simple_ddr |= 0x00000500; - - /* check TXD <-> RXD loop */ - /* set TXD to 1 */ - gpio->simple_dvo |= (1 << 8); - - /* wait some time before requesting status */ - udelay(10); - - if ((gpio->simple_ival & 0x00000200) != 0x00000200) { - error_status = 2; - printf("%s: failure at rs232_3, rxd status is %d " - "(should be 1)\n", __FUNCTION__, - (gpio->simple_ival & 0x00000200) >> 9); - } - - /* set TXD to 0 */ - gpio->simple_dvo &= ~(1 << 8); - - /* wait some time before requesting status */ - udelay(10); - - if ((gpio->simple_ival & 0x00000200) != 0x00000000) { - error_status = 2; - printf("%s: failure at rs232_3, rxd status is %d " - "(should be 0)\n", __FUNCTION__, - (gpio->simple_ival & 0x00000200) >> 9); - } - - /* check RTS <-> CTS loop */ - /* set RTS to 1 */ - gpio->simple_dvo |= (1 << 10); - - /* wait some time before requesting status */ - udelay(10); - - if ((gpio->simple_ival & 0x00000800) != 0x00000800) { - error_status = 3; - printf("%s: failure at rs232_3, cts status is %d " - "(should be 1)\n", __FUNCTION__, - (gpio->simple_ival & 0x00000800) >> 11); - } - - /* set RTS to 0 */ - gpio->simple_dvo &= ~(1 << 10); - - /* wait some time before requesting status */ - udelay(10); - - if ((gpio->simple_ival & 0x00000800) != 0x00000000) { - error_status = 3; - printf("%s: failure at rs232_3, cts status is %d " - "(should be 0)\n", __FUNCTION__, - (gpio->simple_ival & 0x00000800) >> 11); - } - break; - case 4: - /* set PSC6_2, PSC6_3 as output and PSC6_0, PSC6_1 as input */ - printf("Uart 4 test: Please use RS232 Loopback plug on UART2\n" - "\nPress any key to start\n\n"); - getc(); - - gpio->simple_gpioe &= ~(0xF0000000); - gpio->simple_gpioe |= 0x30000000; - - gpio->simple_ddr &= ~(0xf0000000); - gpio->simple_ddr |= 0x30000000; - - (*(vu_long *)MPC5XXX_WU_GPIO_ENABLE) |= 0x30000000; - (*(vu_long *)MPC5XXX_WU_GPIO_DIR) &= ~(0x30000000); - - /* check TXD <-> RXD loop */ - /* set TXD to 1 */ - gpio->simple_dvo |= (1 << 28); - - /* wait some time before requesting status */ - udelay(10); - - if (((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & 0x10000000) != - 0x10000000) { - error_status = 2; - printf("%s: failure at rs232_4, rxd status is %lu " - "(should be 1)\n", __FUNCTION__, - ((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & - 0x10000000) >> 28); - } - - /* set TXD to 0 */ - gpio->simple_dvo &= ~(1 << 28); - - /* wait some time before requesting status */ - udelay(10); - - if (((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & 0x10000000) != - 0x00000000) { - error_status = 2; - printf("%s: failure at rs232_4, rxd status is %lu " - "(should be 0)\n", __FUNCTION__, - ((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & - 0x10000000) >> 28); - } - - /* check RTS <-> CTS loop */ - /* set RTS to 1 */ - gpio->simple_dvo |= (1 << 29); - - /* wait some time before requesting status */ - udelay(10); - - if (((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & 0x20000000) != - 0x20000000) { - error_status = 3; - printf("%s: failure at rs232_4, cts status is %lu " - "(should be 1)\n", __FUNCTION__, - ((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & - 0x20000000) >> 29); - } - - /* set RTS to 0 */ - gpio->simple_dvo &= ~(1 << 29); - - /* wait some time before requesting status */ - udelay(10); - - if (((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & 0x20000000) != - 0x00000000) { - error_status = 3; - printf("%s: failure at rs232_4, cts status is %lu " - "(should be 0)\n", __FUNCTION__, - ((*(vu_long *)MPC5XXX_WU_GPIO_DATA_I) & - 0x20000000) >> 29); - } - break; - default: - printf("%s: invalid rs232 number %s\n", __FUNCTION__, argv[2]); - error_status = 1; - break; - } - gpio->port_config |= (CONFIG_SYS_GPS_PORT_CONFIG & 0xFF0FF80F); - - return error_status; -} - -static int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - int rcode = -1; - - switch (argc) { - case 2: - if (strncmp(argv[1], "led", 3) == 0) - rcode = do_led_test(argv); - else if (strncmp(argv[1], "usb", 3) == 0) - rcode = do_usb_test(argv); - break; - case 3: - if (strncmp(argv[1], "rs232", 3) == 0) - rcode = do_rs232_test(argv); - break; - } - - switch (rcode) { - case -1: - printf("Usage:\n" - "fkt { i2c | led | usb }\n" - "fkt rs232 number\n"); - rcode = 1; - break; - case 0: - printf("Test passed\n"); - break; - default: - printf("Test failed with code: %d\n", rcode); - } - - return rcode; -} - -U_BOOT_CMD( - fkt, 4, 1, cmd_fkt, - "Function test routines", - "i2c\n" - " - Test I2C communication\n" - "fkt led\n" - " - Test LEDs\n" - "fkt rs232 number\n" - " - Test RS232 (loopback plug(s) for RS232 required)\n" - "fkt usb\n" - " - Test USB communication" -); -#endif /* CONFIG_CMD_BSP */ diff --git a/board/cm5200/fwupdate.c b/board/cm5200/fwupdate.c deleted file mode 100644 index 4740c8394c..0000000000 --- a/board/cm5200/fwupdate.c +++ /dev/null @@ -1,181 +0,0 @@ -/* - * (C) Copyright 2007 Schindler Lift Inc. - * (C) Copyright 2007 DENX Software Engineering - * - * Author: Michel Marti mma@objectxp.com - * Adapted for U-Boot 1.2 by Piotr Kruszynski ppk@semihalf.com: - * - code clean-up - * - bugfix for overwriting bootargs by user - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <command.h> -#include <fat.h> -#include <malloc.h> -#include <image.h> -#include <usb.h> -#include <fat.h> - -#include "fwupdate.h" - -static int load_rescue_image(ulong); - -void cm5200_fwupdate(void) -{ - cmd_tbl_t *bcmd; - char *rsargs; - char *tmp = NULL; - char ka[16]; - char * const argv[3] = { "bootm", ka, NULL }; - - /* Check if rescue system is disabled... */ - if (getenv("norescue")) { - printf(LOG_PREFIX "Rescue System disabled.\n"); - return; - } - - /* Check if we have a USB storage device and load image */ - if (load_rescue_image(LOAD_ADDR)) - return; - - bcmd = find_cmd("bootm"); - if (!bcmd) - return; - - sprintf(ka, "%lx", (ulong)LOAD_ADDR); - - /* prepare our bootargs */ - rsargs = getenv("rs-args"); - if (!rsargs) - rsargs = RS_BOOTARGS; - else { - tmp = malloc(strlen(rsargs+1)); - if (!tmp) { - printf(LOG_PREFIX "Memory allocation failed\n"); - return; - } - strcpy(tmp, rsargs); - rsargs = tmp; - } - - setenv("bootargs", rsargs); - - if (rsargs == tmp) - free(rsargs); - - printf(LOG_PREFIX "Starting update system (bootargs=%s)...\n", rsargs); - do_bootm(bcmd, 0, 2, argv); -} - -static int load_rescue_image(ulong addr) -{ - disk_partition_t info; - int devno; - int partno; - int i; - char fwdir[64]; - char nxri[128]; - char *tmp; - char dev[7]; - char addr_str[16]; - char * const argv[6] = { "fatload", "usb", dev, addr_str, nxri, NULL }; - struct blk_desc *stor_dev = NULL; - cmd_tbl_t *bcmd; - - /* Get name of firmware directory */ - tmp = getenv("fw-dir"); - - /* Copy it into fwdir */ - strncpy(fwdir, tmp ? tmp : FW_DIR, sizeof(fwdir)); - fwdir[sizeof(fwdir) - 1] = 0; /* Terminate string */ - - printf(LOG_PREFIX "Checking for firmware image directory '%s' on USB" - " storage...\n", fwdir); - usb_stop(); - if (usb_init() != 0) - return 1; - - /* Check for storage device */ - if (usb_stor_scan(1) != 0) { - usb_stop(); - return 1; - } - - /* Detect storage device */ - for (devno = 0; devno < USB_MAX_STOR_DEV; devno++) { - stor_dev = blk_get_devnum_by_type(IF_TYPE_USB, devno); - if (stor_dev->type != DEV_TYPE_UNKNOWN) - break; - } - if (!stor_dev || stor_dev->type == DEV_TYPE_UNKNOWN) { - printf(LOG_PREFIX "No valid storage device found...\n"); - usb_stop(); - return 1; - } - - /* Detect partition */ - for (partno = -1, i = 0; i < 6; i++) { - if (part_get_info(stor_dev, i, &info) == 0) { - if (fat_register_device(stor_dev, i) == 0) { - /* Check if rescue image is present */ - FW_DEBUG("Looking for firmware directory '%s'" - " on partition %d\n", fwdir, i); - if (!fat_exists(fwdir)) { - FW_DEBUG("No NX rescue image on " - "partition %d.\n", i); - partno = -2; - } else { - partno = i; - FW_DEBUG("Partition %d contains " - "firmware directory\n", partno); - break; - } - } - } - } - - if (partno < 0) { - switch (partno) { - case -1: - printf(LOG_PREFIX "Error: No valid (FAT) partition " - "detected\n"); - break; - case -2: - printf(LOG_PREFIX "Error: No NX rescue image on FAT " - "partition\n"); - break; - default: - printf(LOG_PREFIX "Error: Failed with code %d\n", - partno); - } - usb_stop(); - return 1; - } - - /* Load the rescue image */ - bcmd = find_cmd("fatload"); - if (!bcmd) { - printf(LOG_PREFIX "Error - 'fatload' command not present.\n"); - usb_stop(); - return 1; - } - - tmp = getenv("nx-rescue-image"); - sprintf(nxri, "%s/%s", fwdir, tmp ? tmp : RESCUE_IMAGE); - sprintf(dev, "%d:%d", devno, partno); - sprintf(addr_str, "%lx", addr); - - FW_DEBUG("fat_fsload device='%s', addr='%s', file: %s\n", - dev, addr_str, nxri); - - if (do_fat_fsload(bcmd, 0, 5, argv) != 0) { - usb_stop(); - return 1; - } - - /* Stop USB */ - usb_stop(); - return 0; -} diff --git a/board/cm5200/fwupdate.h b/board/cm5200/fwupdate.h deleted file mode 100644 index 6ddf0bac35..0000000000 --- a/board/cm5200/fwupdate.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * (C) Copyright 2007 Schindler Lift Inc. - * - * Author: Michel Marti mma@objectxp.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __FW_UPDATE_H -#define __FW_UPDATE_H - -/* Default prefix for output messages */ -#define LOG_PREFIX "CM5200:" - -/* Extra debug macro */ -#ifdef CONFIG_FWUPDATE_DEBUG -#define FW_DEBUG(fmt...) printf(LOG_PREFIX fmt) -#else -#define FW_DEBUG(fmt...) -#endif - -/* Name of the directory holding firmware images */ -#define FW_DIR "nx-fw" -#define RESCUE_IMAGE "nxrs.img" -#define LOAD_ADDR 0x400000 -#define RS_BOOTARGS "ramdisk_size=8192K" - -/* Main function for fwupdate */ -void cm5200_fwupdate(void); - -#endif /* __FW_UPDATE_H */ diff --git a/board/davedenx/aria/Kconfig b/board/davedenx/aria/Kconfig deleted file mode 100644 index 54a86b9e13..0000000000 --- a/board/davedenx/aria/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_ARIA - -config SYS_BOARD - default "aria" - -config SYS_VENDOR - default "davedenx" - -config SYS_CONFIG_NAME - default "aria" - -endif diff --git a/board/davedenx/aria/MAINTAINERS b/board/davedenx/aria/MAINTAINERS deleted file mode 100644 index a6152c985a..0000000000 --- a/board/davedenx/aria/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -ARIA BOARD -M: Wolfgang Denk wd@denx.de -S: Maintained -F: board/davedenx/aria/ -F: include/configs/aria.h -F: configs/aria_defconfig diff --git a/board/davedenx/aria/Makefile b/board/davedenx/aria/Makefile deleted file mode 100644 index dd38b7f389..0000000000 --- a/board/davedenx/aria/Makefile +++ /dev/null @@ -1,7 +0,0 @@ -# -# (C) Copyright 2009 Wolfgang Denk wd@denx.de -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := aria.o diff --git a/board/davedenx/aria/aria.c b/board/davedenx/aria/aria.c deleted file mode 100644 index e389819e9d..0000000000 --- a/board/davedenx/aria/aria.c +++ /dev/null @@ -1,115 +0,0 @@ -/* - * (C) Copyright 2009 Wolfgang Denk wd@denx.de - * (C) Copyright 2009 Dave Srl www.dave.eu - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/bitops.h> -#include <command.h> -#include <asm/io.h> -#include <asm/processor.h> -#include <asm/mpc512x.h> -#include <fdt_support.h> -#ifdef CONFIG_MISC_INIT_R -#include <i2c.h> -#endif - -DECLARE_GLOBAL_DATA_PTR; - -int dram_init(void) -{ - gd->ram_size = fixed_sdram(NULL, NULL, 0); - - return 0; -} - -int misc_init_r(void) -{ - u32 tmp; - - tmp = in_be32((u32*)CONFIG_SYS_ARIA_FPGA_BASE); - printf("FPGA: %u-%u.%u.%u\n", - (tmp & 0xFF000000) >> 24, - (tmp & 0x00FF0000) >> 16, - (tmp & 0x0000FF00) >> 8, - tmp & 0x000000FF - ); - - return 0; -} - -static iopin_t ioregs_init[] = { - /* - * FEC - */ - - /* FEC on PSCx_x*/ - { - offsetof(struct ioctrl512x, io_control_psc0_0), 5, 0, - IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | - IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3) - }, - { - offsetof(struct ioctrl512x, io_control_psc1_0), 10, 0, - IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | - IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3) - }, - { - offsetof(struct ioctrl512x, io_control_spdif_txclk), 3, 0, - IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | - IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3) - }, - - /* - * DIU - */ - /* FUNC2=DIU CLK */ - { - offsetof(struct ioctrl512x, io_control_psc6_0), 1, 0, - IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | - IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3) - }, - /* FUNC2=DIU_HSYNC */ - { - offsetof(struct ioctrl512x, io_control_psc6_1), 1, 0, - IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | - IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3) - }, - /* FUNC2=DIUVSYNC Sets Next 26 to DIU Pads */ - { - offsetof(struct ioctrl512x, io_control_psc6_4), 26, 0, - IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | - IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3) - }, - /* - * On board SRAM - */ - /* FUNC2=/LPC CS6 */ - { - offsetof(struct ioctrl512x, io_control_j1850_rx), 1, 0, - IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | - IO_PIN_PUE(1) | IO_PIN_ST(1) | IO_PIN_DS(3) - }, -}; - -int checkboard (void) -{ - puts("Board: ARIA\n"); - - /* initialize function mux & slew rate IO inter alia on IO Pins */ - - iopin_initialize(ioregs_init, ARRAY_SIZE(ioregs_init)); - - return 0; -} - -#ifdef CONFIG_OF_BOARD_SETUP -int ft_board_setup(void *blob, bd_t *bd) -{ - ft_cpu_setup(blob, bd); - - return 0; -} -#endif /* CONFIG_OF_BOARD_SETUP */ diff --git a/board/esd/mecp5123/Kconfig b/board/esd/mecp5123/Kconfig deleted file mode 100644 index 3f2a411196..0000000000 --- a/board/esd/mecp5123/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_MECP5123 - -config SYS_BOARD - default "mecp5123" - -config SYS_VENDOR - default "esd" - -config SYS_CONFIG_NAME - default "mecp5123" - -endif diff --git a/board/esd/mecp5123/MAINTAINERS b/board/esd/mecp5123/MAINTAINERS deleted file mode 100644 index ae5fcead90..0000000000 --- a/board/esd/mecp5123/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -MECP5123 BOARD -M: Reinhard Arlt reinhard.arlt@esd-electronics.com -S: Maintained -F: board/esd/mecp5123/ -F: include/configs/mecp5123.h -F: configs/mecp5123_defconfig diff --git a/board/esd/mecp5123/Makefile b/board/esd/mecp5123/Makefile deleted file mode 100644 index f5ebb0144f..0000000000 --- a/board/esd/mecp5123/Makefile +++ /dev/null @@ -1,7 +0,0 @@ -# -# (C) Copyright 2009 Wolfgang Denk wd@denx.de -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := mecp5123.o diff --git a/board/esd/mecp5123/mecp5123.c b/board/esd/mecp5123/mecp5123.c deleted file mode 100644 index 78a6b66110..0000000000 --- a/board/esd/mecp5123/mecp5123.c +++ /dev/null @@ -1,200 +0,0 @@ -/* - * (C) Copyright 2009 Wolfgang Denk wd@denx.de - * (C) Copyright 2009 Dave Srl www.dave.eu - * (C) Copyright 2009 Stefan Roese sr@denx.de - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/bitops.h> -#include <command.h> -#include <asm/io.h> -#include <asm/processor.h> -#include <asm/mpc512x.h> -#include <fdt_support.h> - -DECLARE_GLOBAL_DATA_PTR; - -int eeprom_write_enable(unsigned dev_addr, int state) -{ - return -ENOSYS; -} - -int board_early_init_f(void) -{ - volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; - int i; - - /* - * Initialize Local Window for boot access - */ - out_be32(&im->sysconf.lpbaw, - CSAW_START(0xffb00000) | CSAW_STOP(0xffb00000, 0x00010000)); - sync_law(&im->sysconf.lpbaw); - - /* - * Configure MSCAN clocks - */ - for (i=0; i<4; ++i) { - out_be32(&im->clk.msccr[i], 0x00300000); - out_be32(&im->clk.msccr[i], 0x00310000); - } - - /* - * Configure GPIO's - */ - clrbits_be32(&im->gpio.gpodr, 0x000000e0); - clrbits_be32(&im->gpio.gpdir, 0x00ef0000); - setbits_be32(&im->gpio.gpdir, 0x001000e0); - setbits_be32(&im->gpio.gpdat, 0x00100000); - - return 0; -} - -int dram_init(void) -{ - gd->ram_size = get_ram_size(0, fixed_sdram(NULL, NULL, 0)); - - return 0; -} - -int misc_init_r(void) -{ - volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; - u32 val; - - /* - * Optimize access to profibus chip (VPC3) on the local bus - */ - - /* - * Select 1:1 for LPC_DIV - */ - val = in_be32(&im->clk.scfr[0]) & ~SCFR1_LPC_DIV_MASK; - out_be32(&im->clk.scfr[0], val | (0x1 << SCFR1_LPC_DIV_SHIFT)); - - /* - * Configure LPC Chips Select Deadcycle Control Register - * CS0 - device can drive data 2 clock cycle(s) after CS deassertion - * CS1 - device can drive data 1 clock cycle(s) after CS deassertion - */ - clrbits_be32(&im->lpc.cs_dccr, 0x000000ff); - setbits_be32(&im->lpc.cs_dccr, (0x00 << 4) | (0x01 << 0)); - - /* - * Configure LPC Chips Select Holdcycle Control Register - * CS0 - data is valid 2 clock cycle(s) after CS deassertion - * CS1 - data is valid 1 clock cycle(s) after CS deassertion - */ - clrbits_be32(&im->lpc.cs_hccr, 0x000000ff); - setbits_be32(&im->lpc.cs_hccr, (0x00 << 4) | (0x01 << 0)); - - return 0; -} - -static iopin_t ioregs_init[] = { - /* FUNC1=FEC_RX_DV Sets Next 3 to FEC pads */ - { - offsetof(struct ioctrl512x, io_control_spdif_txclk), 3, 0, - IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | - IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3) - }, - /* FUNC1=FEC_COL Sets Next 15 to FEC pads */ - { - offsetof(struct ioctrl512x, io_control_psc0_0), 15, 0, - IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | - IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3) - }, - /* FUNC1=SELECT LPC_CS1 */ - { - offsetof(struct ioctrl512x, io_control_lpc_cs1), 1, 0, - IO_PIN_FMUX(0) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | - IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3) - }, - /* FUNC3=SELECT PSC5_2 */ - { - offsetof(struct ioctrl512x, io_control_psc5_2), 1, 0, - IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | - IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3) - }, - /* FUNC3=SELECT PSC5_3 */ - { - offsetof(struct ioctrl512x, io_control_psc5_3), 1, 0, - IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | - IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3) - }, - /* FUNC3=SELECT PSC7_3 */ - { - offsetof(struct ioctrl512x, io_control_psc7_3), 1, 0, - IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | - IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3) - }, - /* FUNC3=SELECT PSC9_0 */ - { - offsetof(struct ioctrl512x, io_control_psc9_0), 3, 0, - IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | - IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3) - }, - /* FUNC3=SELECT PSC10_0 */ - { - offsetof(struct ioctrl512x, io_control_psc10_0), 3, 0, - IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | - IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3) - }, - /* FUNC3=SELECT PSC10_3 */ - { - offsetof(struct ioctrl512x, io_control_psc10_3), 1, 0, - IO_PIN_FMUX(0) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | - IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3) - }, - /* FUNC3=SELECT PSC11_0 */ - { - offsetof(struct ioctrl512x, io_control_psc11_0), 4, 0, - IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | - IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3) - }, - /* FUNC0=SELECT IRQ0 */ - { - offsetof(struct ioctrl512x, io_control_irq0), 4, 0, - IO_PIN_FMUX(0) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | - IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3) - } -}; - -static iopin_t rev2_silicon_pci_ioregs_init[] = { - /* FUNC0=PCI Sets next 54 to PCI pads */ - { - offsetof(struct ioctrl512x, io_control_pci_ad31), 54, 0, - IO_PIN_FMUX(0) | IO_PIN_HOLD(0) | IO_PIN_DS(0) - } -}; - -int checkboard(void) -{ - volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; - u32 spridr; - - puts("Board: MECP_5123\n"); - - /* - * Initialize function mux & slew rate IO inter alia on IO - * Pins - */ - iopin_initialize(ioregs_init, ARRAY_SIZE(ioregs_init)); - - spridr = in_be32(&im->sysconf.spridr); - if (SVR_MJREV(spridr) >= 2) - iopin_initialize(rev2_silicon_pci_ioregs_init, 1); - - return 0; -} - -#ifdef CONFIG_OF_BOARD_SETUP -int ft_board_setup(void *blob, bd_t *bd) -{ - ft_cpu_setup(blob, bd); - - return 0; -} -#endif /* CONFIG_OF_BOARD_SETUP */ diff --git a/board/freescale/mpc5121ads/Kconfig b/board/freescale/mpc5121ads/Kconfig deleted file mode 100644 index f125f9e596..0000000000 --- a/board/freescale/mpc5121ads/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_MPC5121ADS - -config SYS_BOARD - default "mpc5121ads" - -config SYS_VENDOR - default "freescale" - -config SYS_CONFIG_NAME - default "mpc5121ads" - -endif diff --git a/board/freescale/mpc5121ads/MAINTAINERS b/board/freescale/mpc5121ads/MAINTAINERS deleted file mode 100644 index d4aab8fb51..0000000000 --- a/board/freescale/mpc5121ads/MAINTAINERS +++ /dev/null @@ -1,7 +0,0 @@ -MPC5121ADS BOARD -#M: - -S: Maintained -F: board/freescale/mpc5121ads/ -F: include/configs/mpc5121ads.h -F: configs/mpc5121ads_defconfig -F: configs/mpc5121ads_rev2_defconfig diff --git a/board/freescale/mpc5121ads/Makefile b/board/freescale/mpc5121ads/Makefile deleted file mode 100644 index 67cf55546b..0000000000 --- a/board/freescale/mpc5121ads/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2007 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := mpc5121ads.o diff --git a/board/freescale/mpc5121ads/README b/board/freescale/mpc5121ads/README deleted file mode 100644 index 741bc40382..0000000000 --- a/board/freescale/mpc5121ads/README +++ /dev/null @@ -1,7 +0,0 @@ -To configure for the current (Rev 3.x) ADS5121 - make mpc5121ads_config -This will automatically include PCI, the Real Time CLock, add backup flash -ability and set the correct frequency and memory configuration. - -To configure for the older Rev 2 ADS5121 type (this will not have PCI) - make mpc5121ads_rev2_config diff --git a/board/freescale/mpc5121ads/mpc5121ads.c b/board/freescale/mpc5121ads/mpc5121ads.c deleted file mode 100644 index d729056fd0..0000000000 --- a/board/freescale/mpc5121ads/mpc5121ads.c +++ /dev/null @@ -1,265 +0,0 @@ -/* - * (C) Copyright 2007-2009 DENX Software Engineering - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/bitops.h> -#include <command.h> -#include <asm/io.h> -#include <asm/processor.h> -#include <asm/mpc512x.h> -#include <fdt_support.h> -#ifdef CONFIG_MISC_INIT_R -#include <i2c.h> -#endif -#include <net.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/nand.h> - -DECLARE_GLOBAL_DATA_PTR; - -void __mpc5121_nfc_select_chip(struct mtd_info *mtd, int chip); - -/* Active chip number set in board_nand_select_device() (mpc5121_nfc.c) */ -extern int mpc5121_nfc_chip; - -/* Control chips select signal on MPC5121ADS board */ -void mpc5121_nfc_select_chip(struct mtd_info *mtd, int chip) -{ - unsigned char *csreg = (u8 *)CONFIG_SYS_CPLD_BASE + 0x09; - u8 v; - - v = in_8(csreg); - v |= 0x0F; - - if (chip >= 0) { - __mpc5121_nfc_select_chip(mtd, 0); - v &= ~(1 << mpc5121_nfc_chip); - } else { - __mpc5121_nfc_select_chip(mtd, -1); - } - - out_8(csreg, v); -} - -int board_early_init_f(void) -{ - /* - * Disable Boot NOR FLASH write protect - CPLD Reg 8 NOR FLASH Control - * - * Without this the flash identification routine fails, as it needs to issue - * write commands in order to establish the device ID. - */ - -#ifdef CONFIG_MPC5121ADS_REV2 - out_8((u8 *)(CONFIG_SYS_CPLD_BASE + 0x08), 0xC1); -#else - if (in_8((u8 *)(CONFIG_SYS_CPLD_BASE + 0x08)) & 0x04) { - out_8((u8 *)(CONFIG_SYS_CPLD_BASE + 0x08), 0xC1); - } else { - /* running from Backup flash */ - out_8((u8 *)(CONFIG_SYS_CPLD_BASE + 0x08), 0x32); - } -#endif - return 0; -} - -int is_micron(void){ - - ushort brd_rev = *(vu_short *)(CONFIG_SYS_CPLD_BASE + 0x00); - uchar macaddr[6]; - u32 brddate, macchk, ismicron; - - /* - * MAC address has serial number with date of manufacture - * Boards made before Nov-08 #1180 use Micron memory; - * 001e59 is the STx vendor # - * Default is Elpida since it works for both but is slightly slower - */ - ismicron = 0; - if (brd_rev >= 0x0400 && eth_getenv_enetaddr("ethaddr", macaddr)) { - brddate = (macaddr[3] << 16) + (macaddr[4] << 8) + macaddr[5]; - macchk = (macaddr[0] << 16) + (macaddr[1] << 8) + macaddr[2]; - debug("brddate = %d\n\t", brddate); - - if (macchk == 0x001e59 && brddate <= 8111180) - ismicron = 1; - } else if (brd_rev < 0x400) { - ismicron = 1; - } - debug("Using %s Memory settings\n\t", - ismicron ? "Micron" : "Elpida"); - return(ismicron); -} - -int dram_init(void) -{ - u32 msize = 0; - /* - * Elpida MDDRC and initialization settings are an alternative - * to the Default Micron ones for all but the earliest Rev 4 boards - */ - ddr512x_config_t elpida_mddrc_config = { - .ddr_sys_config = CONFIG_SYS_MDDRC_SYS_CFG_ELPIDA, - .ddr_time_config0 = CONFIG_SYS_MDDRC_TIME_CFG0, - .ddr_time_config1 = CONFIG_SYS_MDDRC_TIME_CFG1_ELPIDA, - .ddr_time_config2 = CONFIG_SYS_MDDRC_TIME_CFG2_ELPIDA, - }; - - u32 elpida_init_sequence[] = { - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_PCHG_ALL, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_RFSH, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_RFSH, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_EM2, - CONFIG_SYS_DDRCMD_EM3, - CONFIG_SYS_DDRCMD_EN_DLL, - CONFIG_SYS_ELPIDA_RES_DLL, - CONFIG_SYS_DDRCMD_PCHG_ALL, - CONFIG_SYS_DDRCMD_RFSH, - CONFIG_SYS_DDRCMD_RFSH, - CONFIG_SYS_DDRCMD_RFSH, - CONFIG_SYS_ELPIDA_INIT_DEV_OP, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_OCD_DEFAULT, - CONFIG_SYS_ELPIDA_OCD_EXIT, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_NOP - }; - - if (is_micron()) { - msize = fixed_sdram(NULL, NULL, 0); - } else { - msize = fixed_sdram(&elpida_mddrc_config, - elpida_init_sequence, - sizeof(elpida_init_sequence)/sizeof(u32)); - } - - gd->ram_size = msize; - - return 0; -} - -int misc_init_r(void) -{ - return 0; -} - -static iopin_t ioregs_init[] = { - /* FUNC1=FEC_RX_DV Sets Next 3 to FEC pads */ - { - offsetof(struct ioctrl512x, io_control_spdif_txclk), 3, 0, - IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | - IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3) - }, - /* Set highest Slew on 9 PATA pins */ - { - offsetof(struct ioctrl512x, io_control_pata_ce1), 9, 1, - IO_PIN_FMUX(0) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | - IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3) - }, - /* FUNC1=FEC_COL Sets Next 15 to FEC pads */ - { - offsetof(struct ioctrl512x, io_control_psc0_0), 15, 0, - IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | - IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3) - }, - /* FUNC1=SPDIF_TXCLK */ - { - offsetof(struct ioctrl512x, io_control_lpc_cs1), 1, 0, - IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | - IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3) - }, - /* FUNC2=SPDIF_TX and sets Next pin to SPDIF_RX */ - { - offsetof(struct ioctrl512x, io_control_i2c1_scl), 2, 0, - IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | - IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3) - }, - /* FUNC2=DIU CLK */ - { - offsetof(struct ioctrl512x, io_control_psc6_0), 1, 0, - IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | - IO_PIN_PUE(0) | IO_PIN_ST(1) | IO_PIN_DS(3) - }, - /* FUNC2=DIU_HSYNC */ - { - offsetof(struct ioctrl512x, io_control_psc6_1), 1, 0, - IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | - IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3) - }, - /* FUNC2=DIUVSYNC Sets Next 26 to DIU Pads */ - { - offsetof(struct ioctrl512x, io_control_psc6_4), 26, 0, - IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | - IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3) - } -}; - -static iopin_t rev2_silicon_pci_ioregs_init[] = { - /* FUNC0=PCI Sets next 54 to PCI pads */ - { - offsetof(struct ioctrl512x, io_control_pci_ad31), 54, 0, - IO_PIN_FMUX(0) | IO_PIN_HOLD(0) | IO_PIN_DS(0) - } -}; - -int checkboard (void) -{ - ushort brd_rev = *(vu_short *) (CONFIG_SYS_CPLD_BASE + 0x00); - uchar cpld_rev = *(vu_char *) (CONFIG_SYS_CPLD_BASE + 0x02); - volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; - u32 spridr = in_be32(&im->sysconf.spridr); - - printf ("Board: MPC5121ADS rev. 0x%04x (CPLD rev. 0x%02x)\n", - brd_rev, cpld_rev); - - /* initialize function mux & slew rate IO inter alia on IO Pins */ - iopin_initialize(ioregs_init, ARRAY_SIZE(ioregs_init)); - - if (SVR_MJREV (spridr) >= 2) - iopin_initialize(rev2_silicon_pci_ioregs_init, 1); - - return 0; -} - -#ifdef CONFIG_OF_BOARD_SETUP -int ft_board_setup(void *blob, bd_t *bd) -{ - ft_cpu_setup(blob, bd); - - return 0; -} -#endif /* CONFIG_OF_BOARD_SETUP */ diff --git a/board/ifm/ac14xx/Kconfig b/board/ifm/ac14xx/Kconfig deleted file mode 100644 index 97e80d5ddd..0000000000 --- a/board/ifm/ac14xx/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_AC14XX - -config SYS_BOARD - default "ac14xx" - -config SYS_VENDOR - default "ifm" - -config SYS_CONFIG_NAME - default "ac14xx" - -endif diff --git a/board/ifm/ac14xx/MAINTAINERS b/board/ifm/ac14xx/MAINTAINERS deleted file mode 100644 index 8fd74e516e..0000000000 --- a/board/ifm/ac14xx/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -AC14XX BOARD -M: Anatolij Gustschin agust@denx.de -S: Maintained -F: board/ifm/ac14xx/ -F: include/configs/ac14xx.h -F: configs/ac14xx_defconfig diff --git a/board/ifm/ac14xx/Makefile b/board/ifm/ac14xx/Makefile deleted file mode 100644 index 55def60417..0000000000 --- a/board/ifm/ac14xx/Makefile +++ /dev/null @@ -1,7 +0,0 @@ -# -# (C) Copyright 2009 Wolfgang Denk wd@denx.de -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := ac14xx.o diff --git a/board/ifm/ac14xx/ac14xx.c b/board/ifm/ac14xx/ac14xx.c deleted file mode 100644 index cd79e804a0..0000000000 --- a/board/ifm/ac14xx/ac14xx.c +++ /dev/null @@ -1,569 +0,0 @@ -/* - * (C) Copyright 2009 Wolfgang Denk wd@denx.de - * (C) Copyright 2009 Dave Srl www.dave.eu - * (C) Copyright 2010 ifm ecomatic GmbH - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/bitops.h> -#include <command.h> -#include <asm/io.h> -#include <asm/processor.h> -#include <asm/mpc512x.h> -#include <fdt_support.h> -#ifdef CONFIG_MISC_INIT_R -#include <i2c.h> -#endif - -static int mac_diag; -static int gpio_diag; - -DECLARE_GLOBAL_DATA_PTR; - -static void gpio_configure(void) -{ - immap_t *im; - gpio512x_t *gpioregs; - - im = (immap_t *) CONFIG_SYS_IMMR; - gpioregs = &im->gpio; - out_be32(&gpioregs->gpodr, 0x00290000); /* open drain */ - out_be32(&gpioregs->gpdat, 0x80001040); /* data (when output) */ - - /* - * out_be32(&gpioregs->gpdir, 0xC2293020); - * workaround for a hardware effect: configure direction in pieces, - * setting all outputs at once drops the reset line too low and - * makes us lose the MII connection (breaks ethernet for us) - */ - out_be32(&gpioregs->gpdir, 0x02003060); /* direction */ - setbits_be32(&gpioregs->gpdir, 0x00200000); /* += reset asi */ - udelay(10); - setbits_be32(&gpioregs->gpdir, 0x00080000); /* += reset safety */ - udelay(10); - setbits_be32(&gpioregs->gpdir, 0x00010000); /* += reset comm */ - udelay(10); - setbits_be32(&gpioregs->gpdir, 0xC0000000); /* += backlight, KB sel */ - - /* to turn from red to yellow when U-Boot runs */ - setbits_be32(&gpioregs->gpdat, 0x00002020); - out_be32(&gpioregs->gpimr, 0x00000000); /* interrupt mask */ - out_be32(&gpioregs->gpicr1, 0x00000004); /* interrupt sense part 1 */ - out_be32(&gpioregs->gpicr2, 0x00A80000); /* interrupt sense part 2 */ - out_be32(&gpioregs->gpier, 0xFFFFFFFF); /* interrupt events, clear */ -} - -/* the physical location of the pins */ -#define GPIOKEY_ROW_BITMASK 0x40000000 -#define GPIOKEY_ROW_UPPER 0 -#define GPIOKEY_ROW_LOWER 1 - -#define GPIOKEY_COL0_BITMASK 0x20000000 -#define GPIOKEY_COL1_BITMASK 0x10000000 -#define GPIOKEY_COL2_BITMASK 0x08000000 - -/* the logical presentation of pressed keys */ -#define GPIOKEY_BIT_FNLEFT (1 << 5) -#define GPIOKEY_BIT_FNRIGHT (1 << 4) -#define GPIOKEY_BIT_DIRUP (1 << 3) -#define GPIOKEY_BIT_DIRLEFT (1 << 2) -#define GPIOKEY_BIT_DIRRIGHT (1 << 1) -#define GPIOKEY_BIT_DIRDOWN (1 << 0) - -/* the hotkey combination which starts recovery */ -#define GPIOKEY_BITS_RECOVERY (GPIOKEY_BIT_FNLEFT | GPIOKEY_BIT_DIRUP | \ - GPIOKEY_BIT_DIRDOWN) - -static void gpio_selectrow(gpio512x_t *gpioregs, u32 row) -{ - - if (row) - setbits_be32(&gpioregs->gpdat, GPIOKEY_ROW_BITMASK); - else - clrbits_be32(&gpioregs->gpdat, GPIOKEY_ROW_BITMASK); - udelay(10); -} - -static u32 gpio_querykbd(void) -{ - immap_t *im; - gpio512x_t *gpioregs; - u32 keybits; - u32 input; - - im = (immap_t *)CONFIG_SYS_IMMR; - gpioregs = &im->gpio; - keybits = 0; - - /* query upper row */ - gpio_selectrow(gpioregs, GPIOKEY_ROW_UPPER); - input = in_be32(&gpioregs->gpdat); - if ((input & GPIOKEY_COL0_BITMASK) == 0) - keybits |= GPIOKEY_BIT_FNLEFT; - if ((input & GPIOKEY_COL1_BITMASK) == 0) - keybits |= GPIOKEY_BIT_DIRUP; - if ((input & GPIOKEY_COL2_BITMASK) == 0) - keybits |= GPIOKEY_BIT_FNRIGHT; - - /* query lower row */ - gpio_selectrow(gpioregs, GPIOKEY_ROW_LOWER); - input = in_be32(&gpioregs->gpdat); - if ((input & GPIOKEY_COL0_BITMASK) == 0) - keybits |= GPIOKEY_BIT_DIRLEFT; - if ((input & GPIOKEY_COL1_BITMASK) == 0) - keybits |= GPIOKEY_BIT_DIRRIGHT; - if ((input & GPIOKEY_COL2_BITMASK) == 0) - keybits |= GPIOKEY_BIT_DIRDOWN; - - /* return bit pattern for keys */ - return keybits; -} - -/* excerpt from the recovery's hw_info.h */ - -struct __attribute__ ((__packed__)) eeprom_layout { - char magic[3]; /** 'ifm' */ - u8 len[2]; /** content length without magic/len fields */ - u8 version[3]; /** structure version */ - u8 type; /** type of PCB */ - u8 reserved[0x37]; /** padding up to offset 0x40 */ - u8 macaddress[6]; /** ethernet MAC (for the mainboard) @0x40 */ -}; - -#define HW_COMP_MAINCPU 2 - -static struct eeprom_layout eeprom_content; -static int eeprom_is_valid; -static int eeprom_version; - -#define get_eeprom_field_int(name) ({ \ - int value; \ - int idx; \ - value = 0; \ - for (idx = 0; idx < sizeof(name); idx++) { \ - value <<= 8; \ - value |= name[idx]; \ - } \ - value; \ -}) - -static int read_eeprom(void) -{ - return -ENOSYS; -} - -int mac_read_from_eeprom(void) -{ - const u8 *mac; - const char *mac_txt; - - if (read_eeprom()) { - printf("I2C EEPROM read failed.\n"); - return -1; - } - - if (!eeprom_is_valid) { - printf("I2C EEPROM content not valid\n"); - return -1; - } - - mac = NULL; - switch (eeprom_version) { - case 1: - case 2: - mac = (const u8 *)&eeprom_content.macaddress; - break; - } - - if (mac && is_valid_ethaddr(mac)) { - eth_setenv_enetaddr("ethaddr", mac); - if (mac_diag) { - mac_txt = getenv("ethaddr"); - if (mac_txt) - printf("DIAG: MAC value [%s]\n", mac_txt); - else - printf("DIAG: failed to setup MAC env\n"); - } - } - - return 0; -} - -/* - * BEWARE! - * this board uses DDR1(!) Micron SDRAM, *NOT* the DDR2 - * which the ADS, Aria or PDM360NG boards are using - * (the steps outlined here refer to the Micron datasheet) - */ -u32 sdram_init_seq[] = { - /* item 6, at least one NOP after CKE went high */ - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_NOP, - /* item 7, precharge all; item 8, tRP (20ns) */ - CONFIG_SYS_DDRCMD_PCHG_ALL, - CONFIG_SYS_DDRCMD_NOP, - /* item 9, extended mode register; item 10, tMRD 10ns) */ - CONFIG_SYS_MICRON_EMODE | CONFIG_SYS_MICRON_EMODE_PARAM, - CONFIG_SYS_DDRCMD_NOP, - /* - * item 11, (base) mode register _with_ reset DLL; - * item 12, tMRD (10ns) - */ - CONFIG_SYS_MICRON_BMODE | CONFIG_SYS_MICRON_BMODE_RSTDLL | - CONFIG_SYS_MICRON_BMODE_PARAM, - CONFIG_SYS_DDRCMD_NOP, - /* item 13, precharge all; item 14, tRP (20ns) */ - CONFIG_SYS_DDRCMD_PCHG_ALL, - CONFIG_SYS_DDRCMD_NOP, - /* - * item 15, auto refresh (i.e. refresh with CKE held high); - * item 16, tRFC (70ns) - */ - CONFIG_SYS_DDRCMD_RFSH, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_NOP, - /* - * item 17, auto refresh (i.e. refresh with CKE held high); - * item 18, tRFC (70ns) - */ - CONFIG_SYS_DDRCMD_RFSH, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_NOP, - /* item 19, optional, unassert DLL reset; item 20, tMRD (20ns) */ - CONFIG_SYS_MICRON_BMODE | CONFIG_SYS_MICRON_BMODE_PARAM, - CONFIG_SYS_DDRCMD_NOP, - /* - * item 21, "actually done", but make sure 200 DRAM clock cycles - * have passed after DLL reset before READ requests are issued - * (200 cycles at 160MHz -> 1.25 usec) - */ - /* EMPTY, optional, we don't do it */ -}; - -int dram_init(void) -{ - gd->ram_size = fixed_sdram(NULL, sdram_init_seq, - ARRAY_SIZE(sdram_init_seq)); - - return 0; -} - -int misc_init_r(void) -{ - u32 keys; - char *s; - int want_recovery; - - /* setup GPIO directions and initial values */ - gpio_configure(); - - /* - * enforce the start of the recovery system when - * - the appropriate keys were pressed - * - "some" external software told us to - * - a previous installation was aborted or has failed - */ - want_recovery = 0; - keys = gpio_querykbd(); - if (gpio_diag) - printf("GPIO keyboard status [0x%02X]\n", keys); - if ((keys & GPIOKEY_BITS_RECOVERY) == GPIOKEY_BITS_RECOVERY) { - printf("detected recovery request (keyboard)\n"); - want_recovery = 1; - } - s = getenv("want_recovery"); - if ((s != NULL) && (*s != '\0')) { - printf("detected recovery request (environment)\n"); - want_recovery = 1; - } - s = getenv("install_in_progress"); - if ((s != NULL) && (*s != '\0')) { - printf("previous installation has not completed\n"); - want_recovery = 1; - } - s = getenv("install_failed"); - if ((s != NULL) && (*s != '\0')) { - printf("previous installation has failed\n"); - want_recovery = 1; - } - if (want_recovery) { - printf("enforced start of the recovery system\n"); - setenv("bootcmd", "run recovery"); - } - - /* - * boot the recovery system without waiting; boot the - * production system without waiting by default, only - * insert a pause (to provide a chance to get a prompt) - * when GPIO keys were pressed during power on - */ - if (want_recovery) - setenv("bootdelay", "0"); - else if (!keys) - setenv("bootdelay", "0"); - else - setenv("bootdelay", "2"); - - /* get the ethernet MAC from I2C EEPROM */ - mac_read_from_eeprom(); - - return 0; -} - -/* setup specific IO pad configuration */ -static iopin_t ioregs_init[] = { - { /* LPC CS3 */ - offsetof(struct ioctrl512x, io_control_nfc_ce0), 1, - IO_PIN_OVER_FMUX | IO_PIN_OVER_DRVSTR, - IO_PIN_FMUX(1) | IO_PIN_DS(2), - }, - { /* LPC CS1 */ - offsetof(struct ioctrl512x, io_control_lpc_cs1), 1, - IO_PIN_OVER_DRVSTR, - IO_PIN_DS(2), - }, - { /* LPC CS2 */ - offsetof(struct ioctrl512x, io_control_lpc_cs2), 1, - IO_PIN_OVER_DRVSTR, - IO_PIN_DS(2), - }, - { /* LPC CS4, CS5 */ - offsetof(struct ioctrl512x, io_control_pata_ce1), 2, - IO_PIN_OVER_FMUX | IO_PIN_OVER_DRVSTR, - IO_PIN_FMUX(1) | IO_PIN_DS(2), - }, - { /* SDHC CLK, CMD, D0, D1, D2, D3 */ - offsetof(struct ioctrl512x, io_control_pata_ior), 6, - IO_PIN_OVER_FMUX | IO_PIN_OVER_DRVSTR, - IO_PIN_FMUX(1) | IO_PIN_DS(2), - }, - { /* GPIO keyboard */ - offsetof(struct ioctrl512x, io_control_pci_ad30), 4, - IO_PIN_OVER_FMUX, - IO_PIN_FMUX(3), - }, - { /* GPIO DN1 PF, LCD power, DN2 PF */ - offsetof(struct ioctrl512x, io_control_pci_ad26), 3, - IO_PIN_OVER_FMUX, - IO_PIN_FMUX(3), - }, - { /* GPIO reset AS-i */ - offsetof(struct ioctrl512x, io_control_pci_ad21), 1, - IO_PIN_OVER_FMUX, - IO_PIN_FMUX(3), - }, - { /* GPIO reset safety */ - offsetof(struct ioctrl512x, io_control_pci_ad19), 1, - IO_PIN_OVER_FMUX, - IO_PIN_FMUX(3), - }, - { /* GPIO reset netX */ - offsetof(struct ioctrl512x, io_control_pci_ad16), 1, - IO_PIN_OVER_FMUX, - IO_PIN_FMUX(3), - }, - { /* GPIO ma2 en */ - offsetof(struct ioctrl512x, io_control_pci_ad15), 1, - IO_PIN_OVER_FMUX, - IO_PIN_FMUX(3), - }, - { /* GPIO SD CD, SD WP */ - offsetof(struct ioctrl512x, io_control_pci_ad08), 2, - IO_PIN_OVER_FMUX, - IO_PIN_FMUX(3), - }, - { /* FEC RX DV */ - offsetof(struct ioctrl512x, io_control_pci_ad06), 1, - IO_PIN_OVER_FMUX | IO_PIN_OVER_DRVSTR, - IO_PIN_FMUX(2) | IO_PIN_DS(2), - }, - { /* GPIO AS-i prog, AS-i done, LCD backlight */ - offsetof(struct ioctrl512x, io_control_pci_ad05), 3, - IO_PIN_OVER_FMUX, - IO_PIN_FMUX(3), - }, - { /* GPIO AS-i wdg */ - offsetof(struct ioctrl512x, io_control_pci_req2), 1, - IO_PIN_OVER_FMUX, - IO_PIN_FMUX(3), - }, - { /* GPIO safety wdg */ - offsetof(struct ioctrl512x, io_control_pci_req1), 1, - IO_PIN_OVER_FMUX, - IO_PIN_FMUX(3), - }, - { /* GPIO netX wdg */ - offsetof(struct ioctrl512x, io_control_pci_req0), 1, - IO_PIN_OVER_FMUX, - IO_PIN_FMUX(3), - }, - { /* GPIO IRQ powerfail */ - offsetof(struct ioctrl512x, io_control_pci_inta), 1, - IO_PIN_OVER_FMUX, - IO_PIN_FMUX(3), - }, - { /* GPIO AS-i PWRD */ - offsetof(struct ioctrl512x, io_control_pci_frame), 1, - IO_PIN_OVER_FMUX, - IO_PIN_FMUX(3), - }, - { /* GPIO LED0, LED1 */ - offsetof(struct ioctrl512x, io_control_pci_idsel), 2, - IO_PIN_OVER_FMUX, - IO_PIN_FMUX(3), - }, - { /* GPIO IRQ AS-i 1, IRQ AS-i 2, IRQ safety */ - offsetof(struct ioctrl512x, io_control_pci_irdy), 3, - IO_PIN_OVER_FMUX, - IO_PIN_FMUX(3), - }, - { /* DIU clk */ - offsetof(struct ioctrl512x, io_control_spdif_txclk), 1, - IO_PIN_OVER_FMUX | IO_PIN_OVER_DRVSTR, - IO_PIN_FMUX(2) | IO_PIN_DS(2), - }, - { /* FEC TX ER, CRS */ - offsetof(struct ioctrl512x, io_control_spdif_tx), 2, - IO_PIN_OVER_FMUX | IO_PIN_OVER_DRVSTR, - IO_PIN_FMUX(1) | IO_PIN_DS(2), - }, - { /* GPIO/GPT */ /* to *NOT* have the EXT IRQ0 float */ - offsetof(struct ioctrl512x, io_control_irq0), 1, - IO_PIN_OVER_FMUX, - IO_PIN_FMUX(3), - }, - { /* - * FEC col, tx en, tx clk, txd 0-3, mdc, rx er, - * rdx 3-0, mdio, rx clk - */ - offsetof(struct ioctrl512x, io_control_psc0_0), 15, - IO_PIN_OVER_FMUX | IO_PIN_OVER_DRVSTR, - IO_PIN_FMUX(1) | IO_PIN_DS(2), - }, - /* optional: make sure PSC3 remains the serial console */ - { /* LPC CS6 */ - offsetof(struct ioctrl512x, io_control_psc3_4), 1, - IO_PIN_OVER_FMUX | IO_PIN_OVER_DRVSTR, - IO_PIN_FMUX(1) | IO_PIN_DS(2), - }, - /* make sure PSC4 remains available for SPI, - *BUT* PSC4_1 is a GPIO kind of SS! */ - { /* enforce drive strength on the SPI pin */ - offsetof(struct ioctrl512x, io_control_psc4_0), 5, - IO_PIN_OVER_DRVSTR, - IO_PIN_DS(2), - }, - { - offsetof(struct ioctrl512x, io_control_psc4_1), 1, - IO_PIN_OVER_FMUX, - IO_PIN_FMUX(3), - }, - /* optional: make sure PSC5 remains available for SPI */ - { /* enforce drive strength on the SPI pin */ - offsetof(struct ioctrl512x, io_control_psc5_0), 5, - IO_PIN_OVER_DRVSTR, - IO_PIN_DS(1), - }, - { /* LPC TSIZ1 */ - offsetof(struct ioctrl512x, io_control_psc6_0), 1, - IO_PIN_OVER_FMUX | IO_PIN_OVER_DRVSTR, - IO_PIN_FMUX(1) | IO_PIN_DS(2), - }, - { /* DIU hsync */ - offsetof(struct ioctrl512x, io_control_psc6_1), 1, - IO_PIN_OVER_FMUX | IO_PIN_OVER_DRVSTR, - IO_PIN_FMUX(2) | IO_PIN_DS(1), - }, - { /* DIU vsync */ - offsetof(struct ioctrl512x, io_control_psc6_4), 1, - IO_PIN_OVER_FMUX | IO_PIN_OVER_DRVSTR, - IO_PIN_FMUX(2) | IO_PIN_DS(1), - }, - { /* PSC7, part of DIU RGB */ - offsetof(struct ioctrl512x, io_control_psc7_0), 2, - IO_PIN_OVER_FMUX | IO_PIN_OVER_DRVSTR, - IO_PIN_FMUX(2) | IO_PIN_DS(1), - }, - { /* PSC7, safety UART */ - offsetof(struct ioctrl512x, io_control_psc7_2), 2, - IO_PIN_OVER_FMUX | IO_PIN_OVER_DRVSTR, - IO_PIN_FMUX(0) | IO_PIN_DS(1), - }, - { /* DIU (part of) RGB[] */ - offsetof(struct ioctrl512x, io_control_psc8_3), 16, - IO_PIN_OVER_FMUX | IO_PIN_OVER_DRVSTR, - IO_PIN_FMUX(2) | IO_PIN_DS(1), - }, - { /* DIU data enable */ - offsetof(struct ioctrl512x, io_control_psc11_4), 1, - IO_PIN_OVER_FMUX | IO_PIN_OVER_DRVSTR, - IO_PIN_FMUX(2) | IO_PIN_DS(1), - }, - /* reduce LPB drive strength for improved EMI */ - { /* LPC OE, LPC RW */ - offsetof(struct ioctrl512x, io_control_lpc_oe), 2, - IO_PIN_OVER_DRVSTR, - IO_PIN_DS(2), - }, - { /* LPC AX03 through LPC AD00 */ - offsetof(struct ioctrl512x, io_control_lpc_ax03), 36, - IO_PIN_OVER_DRVSTR, - IO_PIN_DS(2), - }, - { /* LPC CS5 */ - offsetof(struct ioctrl512x, io_control_pata_ce2), 1, - IO_PIN_OVER_DRVSTR, - IO_PIN_DS(2), - }, - { /* SDHC CLK */ - offsetof(struct ioctrl512x, io_control_nfc_wp), 1, - IO_PIN_OVER_DRVSTR, - IO_PIN_DS(2), - }, - { /* SDHC DATA */ - offsetof(struct ioctrl512x, io_control_nfc_ale), 4, - IO_PIN_OVER_DRVSTR, - IO_PIN_DS(2), - }, -}; - -int checkboard(void) -{ - puts("Board: ifm AC14xx\n"); - - /* initialize function mux & slew rate IO inter alia on IO Pins */ - iopin_initialize_bits(ioregs_init, ARRAY_SIZE(ioregs_init)); - - return 0; -} - -#ifdef CONFIG_OF_BOARD_SETUP -int ft_board_setup(void *blob, bd_t *bd) -{ - ft_cpu_setup(blob, bd); - - return 0; -} -#endif /* CONFIG_OF_BOARD_SETUP */ diff --git a/board/ifm/o2dnt2/Kconfig b/board/ifm/o2dnt2/Kconfig deleted file mode 100644 index e9d32ddc54..0000000000 --- a/board/ifm/o2dnt2/Kconfig +++ /dev/null @@ -1,77 +0,0 @@ -if TARGET_O2D - -config SYS_BOARD - default "o2dnt2" - -config SYS_VENDOR - default "ifm" - -config SYS_CONFIG_NAME - default "o2d" - -endif - -if TARGET_O2D300 - -config SYS_BOARD - default "o2dnt2" - -config SYS_VENDOR - default "ifm" - -config SYS_CONFIG_NAME - default "o2d300" - -endif - -if TARGET_O2DNT2 - -config SYS_BOARD - default "o2dnt2" - -config SYS_VENDOR - default "ifm" - -config SYS_CONFIG_NAME - default "o2dnt2" - -endif - -if TARGET_O2I - -config SYS_BOARD - default "o2dnt2" - -config SYS_VENDOR - default "ifm" - -config SYS_CONFIG_NAME - default "o2i" - -endif - -if TARGET_O2MNT - -config SYS_BOARD - default "o2dnt2" - -config SYS_VENDOR - default "ifm" - -config SYS_CONFIG_NAME - default "o2mnt" - -endif - -if TARGET_O3DNT - -config SYS_BOARD - default "o2dnt2" - -config SYS_VENDOR - default "ifm" - -config SYS_CONFIG_NAME - default "o3dnt" - -endif diff --git a/board/ifm/o2dnt2/MAINTAINERS b/board/ifm/o2dnt2/MAINTAINERS deleted file mode 100644 index 002f89e729..0000000000 --- a/board/ifm/o2dnt2/MAINTAINERS +++ /dev/null @@ -1,20 +0,0 @@ -O2DNT2 BOARD -M: Anatolij Gustschin agust@denx.de -S: Maintained -F: board/ifm/o2dnt2/ -F: include/configs/o2d.h -F: configs/O2D_defconfig -F: include/configs/o2d300.h -F: configs/O2D300_defconfig -F: include/configs/o2dnt2.h -F: configs/O2DNT2_defconfig -F: configs/O2DNT2_RAMBOOT_defconfig -F: include/configs/o2i.h -F: configs/O2I_defconfig -F: include/configs/o2mnt.h -F: configs/O2MNT_defconfig -F: configs/O2MNT_O2M110_defconfig -F: configs/O2MNT_O2M112_defconfig -F: configs/O2MNT_O2M113_defconfig -F: include/configs/o3dnt.h -F: configs/O3DNT_defconfig diff --git a/board/ifm/o2dnt2/Makefile b/board/ifm/o2dnt2/Makefile deleted file mode 100644 index 64d6ba8c55..0000000000 --- a/board/ifm/o2dnt2/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2005-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := o2dnt2.o diff --git a/board/ifm/o2dnt2/o2dnt2.c b/board/ifm/o2dnt2/o2dnt2.c deleted file mode 100644 index 7770806bd2..0000000000 --- a/board/ifm/o2dnt2/o2dnt2.c +++ /dev/null @@ -1,388 +0,0 @@ -/* - * Partially derived from board code for digsyMTC, - * (C) Copyright 2009 - * Grzegorz Bernacki, Semihalf, gjb@semihalf.com - * - * (C) Copyright 2012 - * DENX Software Engineering, Anatolij Gustschin agust@denx.de - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <mpc5xxx.h> -#include <asm/processor.h> -#include <asm/io.h> -#include <libfdt.h> -#include <fdt_support.h> -#include <i2c.h> -#include <miiphy.h> -#include <net.h> -#include <pci.h> - -DECLARE_GLOBAL_DATA_PTR; - -#define SDRAM_MODE 0x00CD0000 -#define SDRAM_CONTROL 0x504F0000 -#define SDRAM_CONFIG1 0xD2322800 -#define SDRAM_CONFIG2 0x8AD70000 - -enum ifm_sensor_type { - O2DNT = 0x00, /* !< O2DNT 32MB */ - O2DNT2 = 0x01, /* !< O2DNT2 64MB */ - O3DNT = 0x02, /* !< O3DNT 32MB */ - O3DNT_MIN = 0x40, /* !< O3DNT Minerva 32MB */ - UNKNOWN = 0xff, /* !< Unknow sensor */ -}; - -static enum ifm_sensor_type gt_ifm_sensor_type; - -#ifndef CONFIG_SYS_RAMBOOT -static void sdram_start(int hi_addr) -{ - struct mpc5xxx_sdram *sdram = (struct mpc5xxx_sdram *)MPC5XXX_SDRAM; - long hi_addr_bit = hi_addr ? 0x01000000 : 0; - long control = SDRAM_CONTROL | hi_addr_bit; - - /* unlock mode register */ - out_be32(&sdram->ctrl, control | 0x80000000); - - /* precharge all banks */ - out_be32(&sdram->ctrl, control | 0x80000002); - - /* auto refresh */ - out_be32(&sdram->ctrl, control | 0x80000004); - - /* set mode register */ - out_be32(&sdram->mode, SDRAM_MODE); - - /* normal operation */ - out_be32(&sdram->ctrl, control); -} -#endif - -/* - * ATTENTION: Although partially referenced dram_init does NOT make real use - * use of CONFIG_SYS_SDRAM_BASE. The code does not work if - * CONFIG_SYS_SDRAM_BASE is something else than 0x00000000. - */ -int dram_init(void) -{ - struct mpc5xxx_mmap_ctl *mmap_ctl = - (struct mpc5xxx_mmap_ctl *)CONFIG_SYS_MBAR; - struct mpc5xxx_sdram *sdram = (struct mpc5xxx_sdram *)MPC5XXX_SDRAM; - ulong dramsize = 0; - ulong dramsize2 = 0; - uint svr, pvr; - - if (gt_ifm_sensor_type == O2DNT2) { - /* activate SDRAM CS1 */ - setbits_be32((void *)MPC5XXX_GPS_PORT_CONFIG, 0x80000000); - } - -#ifndef CONFIG_SYS_RAMBOOT - ulong test1, test2; - - /* setup SDRAM chip selects */ - out_be32(&mmap_ctl->sdram0, 0x0000001E); /* 2 GB at 0x0 */ - out_be32(&mmap_ctl->sdram1, 0x00000000); /* disabled */ - - /* setup config registers */ - out_be32(&sdram->config1, SDRAM_CONFIG1); - out_be32(&sdram->config2, SDRAM_CONFIG2); - - /* find RAM size using SDRAM CS0 only */ - sdram_start(0); - test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x08000000); - sdram_start(1); - test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x08000000); - if (test1 > test2) { - sdram_start(0); - dramsize = test1; - } else { - dramsize = test2; - } - - /* memory smaller than 1MB is impossible */ - if (dramsize < (1 << 20)) - dramsize = 0; - - /* set SDRAM CS0 size according to the amount of RAM found */ - if (dramsize > 0) { - out_be32(&mmap_ctl->sdram0, - (0x13 + __builtin_ffs(dramsize >> 20) - 1)); - } else { - out_be32(&mmap_ctl->sdram0, 0); /* disabled */ - } - - /* let SDRAM CS1 start right after CS0 */ - out_be32(&mmap_ctl->sdram1, dramsize + 0x0000001E); /* 2G */ - - /* find RAM size using SDRAM CS1 only */ - if (!dramsize) - sdram_start(0); - - test2 = test1 = get_ram_size((long *)(CONFIG_SYS_SDRAM_BASE + dramsize), - 0x80000000); - if (!dramsize) { - sdram_start(1); - test2 = get_ram_size((long *)(CONFIG_SYS_SDRAM_BASE + dramsize), - 0x80000000); - } - - if (test1 > test2) { - sdram_start(0); - dramsize2 = test1; - } else { - dramsize2 = test2; - } - - /* memory smaller than 1MB is impossible */ - if (dramsize2 < (1 << 20)) - dramsize2 = 0; - - /* set SDRAM CS1 size according to the amount of RAM found */ - if (dramsize2 > 0) { - out_be32(&mmap_ctl->sdram1, (dramsize | - (0x13 + __builtin_ffs(dramsize2 >> 20) - 1))); - } else { - out_be32(&mmap_ctl->sdram1, dramsize); /* disabled */ - } - -#else /* CONFIG_SYS_RAMBOOT */ - /* retrieve size of memory connected to SDRAM CS0 */ - dramsize = in_be32(&mmap_ctl->sdram0) & 0xFF; - if (dramsize >= 0x13) - dramsize = (1 << (dramsize - 0x13)) << 20; - else - dramsize = 0; - - /* retrieve size of memory connected to SDRAM CS1 */ - dramsize2 = in_be32(&mmap_ctl->sdram1) & 0xFF; - if (dramsize2 >= 0x13) - dramsize2 = (1 << (dramsize2 - 0x13)) << 20; - else - dramsize2 = 0; - -#endif /* CONFIG_SYS_RAMBOOT */ - - /* - * On MPC5200B we need to set the special configuration delay in the - * DDR controller. Please refer to Freescale's AN3221 "MPC5200B SDRAM - * Initialization and Configuration", 3.3.1 SDelay--MBAR + 0x0190: - * - * "The SDelay should be written to a value of 0x00000004. It is - * required to account for changes caused by normal wafer processing - * parameters." - */ - svr = get_svr(); - pvr = get_pvr(); - if ((SVR_MJREV(svr) >= 2) && - (PVR_MAJ(pvr) == 1) && (PVR_MIN(pvr) == 4)) - out_be32(&sdram->sdelay, 0x04); - - gd->ram_size = dramsize + dramsize2; - - return 0; -} - - -#define GPT_GPIO_IN 0x4 - -int checkboard(void) -{ - struct mpc5xxx_gpt *gpt = (struct mpc5xxx_gpt *)MPC5XXX_GPT; - unsigned char board_config = 0; - int i; - - /* switch gpt0 - gpt7 to input */ - for (i = 0; i < 7; i++) - out_be32(&gpt[i].emsr, GPT_GPIO_IN); - - /* get configuration byte on timer-port */ - for (i = 0; i < 7; i++) - board_config |= (in_be32(&gpt[i].sr) & 0x100) >> (8 - i); - - puts("Board: "); - - switch (board_config) { - case 0: - puts("O2DNT\n"); - gt_ifm_sensor_type = O2DNT; - break; - case 1: - puts("O3DNT\n"); - gt_ifm_sensor_type = O3DNT; - break; - case 2: - puts("O2DNT2\n"); - gt_ifm_sensor_type = O2DNT2; - break; - case 64: - puts("O3DNT Minerva\n"); - gt_ifm_sensor_type = O3DNT_MIN; - break; - default: - puts("Unknown\n"); - gt_ifm_sensor_type = UNKNOWN; - break; - } - - return 0; -} - -int board_early_init_r(void) -{ - struct mpc5xxx_lpb *lpb_regs = (struct mpc5xxx_lpb *)MPC5XXX_LPB; - - /* - * Now, when we are in RAM, enable flash write access for detection - * process. Note that CS_BOOT cannot be cleared when executing in flash. - */ - clrbits_be32(&lpb_regs->cs0_cfg, 1); /* clear RO */ - /* disable CS_BOOT */ - clrbits_be32((void *)MPC5XXX_ADDECR, (1 << 25)); - /* enable CS0 */ - setbits_be32((void *)MPC5XXX_ADDECR, (1 << 16)); - - return 0; -} - -#define MIIM_LXT971_LED_CFG_REG 0x14 -#define LXT971_LED_CFG_LINK_STATUS 0x4000 -#define LXT971_LED_CFG_RX_TX_ACTIVITY 0x0700 -#define LXT971_LED_CFG_LINK_ACTIVITY 0x00D0 -#define LXT971_LED_CFG_PULSE_STRETCH 0x0002 -/* - * Additional PHY intialization after reset in mpc5xxx_fec_init_phy() - */ -void reset_phy(void) -{ - /* - * Set LED configuration bits. - * It can't be done in misc_init_r() since FEC is not - * initialized at this time. Therefore we do it here. - */ - miiphy_write("FEC", CONFIG_PHY_ADDR, MIIM_LXT971_LED_CFG_REG, - LXT971_LED_CFG_LINK_STATUS | - LXT971_LED_CFG_RX_TX_ACTIVITY | - LXT971_LED_CFG_LINK_ACTIVITY | - LXT971_LED_CFG_PULSE_STRETCH); -} - -#if defined(CONFIG_POST) -/* - * Reads GPIO pin PSC6_3. A keypress is reported, if PSC6_3 is low. If PSC6_3 - * is left open, no keypress is detected. - */ -int post_hotkeys_pressed(void) -{ - struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio *) MPC5XXX_GPIO; - - /* - * Configure PSC6_1 and PSC6_3 as GPIO. PSC6 then couldn't be used in - * CODEC or UART mode. Consumer IrDA should still be possible. - */ - clrbits_be32(&gpio->port_config, 0x07000000); - setbits_be32(&gpio->port_config, 0x03000000); - - /* Enable GPIO for GPIO_IRDA_1 (IR_USB_CLK pin) = PSC6_3 */ - setbits_be32(&gpio->simple_gpioe, 0x20000000); - - /* Configure GPIO_IRDA_1 as input */ - clrbits_be32(&gpio->simple_ddr, 0x20000000); - - return (in_be32(&gpio->simple_ival) & 0x20000000) ? 0 : 1; -} -#endif - -#ifdef CONFIG_PCI -static struct pci_controller hose; - -void pci_init_board(void) -{ - pci_mpc5xxx_init(&hose); -} -#endif - -#ifdef CONFIG_OF_BOARD_SETUP -#if defined(CONFIG_SYS_UPDATE_FLASH_SIZE) -static void ft_adapt_flash_base(void *blob) -{ - flash_info_t *dev = &flash_info[0]; - int off; - struct fdt_property *prop; - int len; - u32 *reg, *reg2; - - off = fdt_node_offset_by_compatible(blob, -1, "fsl,mpc5200b-lpb"); - if (off < 0) { - printf("Could not find fsl,mpc5200b-lpb node.\n"); - return; - } - - /* found compatible property */ - prop = fdt_get_property_w(blob, off, "ranges", &len); - if (prop) { - reg = reg2 = (u32 *)&prop->data[0]; - - reg[2] = dev->start[0]; - reg[3] = dev->size; - fdt_setprop(blob, off, "ranges", reg2, len); - } else - printf("Could not find ranges\n"); -} - -extern ulong flash_get_size(phys_addr_t base, int banknum); - -/* Update the flash baseaddr settings */ -int update_flash_size(int flash_size) -{ - struct mpc5xxx_mmap_ctl *mm = - (struct mpc5xxx_mmap_ctl *) CONFIG_SYS_MBAR; - flash_info_t *dev; - int i; - int size = 0; - unsigned long base = 0x0; - u32 *cs_reg = (u32 *)&mm->cs0_start; - - for (i = 0; i < 2; i++) { - dev = &flash_info[i]; - - if (dev->size) { - /* calculate new base addr for this chipselect */ - base -= dev->size; - out_be32(cs_reg, START_REG(base)); - cs_reg++; - out_be32(cs_reg, STOP_REG(base, dev->size)); - cs_reg++; - /* recalculate the sectoraddr in the cfi driver */ - size += flash_get_size(base, i); - } - } - flash_protect_default(); - gd->bd->bi_flashstart = base; - return 0; -} -#endif /* defined(CONFIG_SYS_UPDATE_FLASH_SIZE) */ - -int ft_board_setup(void *blob, bd_t *bd) -{ - int phy_addr = CONFIG_PHY_ADDR; - char eth_path[] = "/soc5200@f0000000/mdio@3000/ethernet-phy@0"; - - ft_cpu_setup(blob, bd); - -#if defined(CONFIG_SYS_UPDATE_FLASH_SIZE) -#ifdef CONFIG_FDT_FIXUP_NOR_FLASH_SIZE - /* Update reg property in all nor flash nodes too */ - fdt_fixup_nor_flash_size(blob); -#endif - ft_adapt_flash_base(blob); -#endif - /* fix up the phy address */ - do_fixup_by_path(blob, eth_path, "reg", &phy_addr, sizeof(int), 0); - - return 0; -} -#endif /* CONFIG_OF_BOARD_SETUP */ diff --git a/board/inka4x0/Kconfig b/board/inka4x0/Kconfig deleted file mode 100644 index 94a41f01a5..0000000000 --- a/board/inka4x0/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -if TARGET_INKA4X0 - -config SYS_BOARD - default "inka4x0" - -config SYS_CONFIG_NAME - default "inka4x0" - -endif diff --git a/board/inka4x0/MAINTAINERS b/board/inka4x0/MAINTAINERS deleted file mode 100644 index e8cec73a1a..0000000000 --- a/board/inka4x0/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -INKA4X0 BOARD -M: Anatolij Gustschin agust@denx.de -S: Maintained -F: board/inka4x0/ -F: include/configs/inka4x0.h -F: configs/inka4x0_defconfig diff --git a/board/inka4x0/Makefile b/board/inka4x0/Makefile deleted file mode 100644 index c9a3540799..0000000000 --- a/board/inka4x0/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2003-2009 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := inka4x0.o inkadiag.o diff --git a/board/inka4x0/inka4x0.c b/board/inka4x0/inka4x0.c deleted file mode 100644 index 88cae59e8f..0000000000 --- a/board/inka4x0/inka4x0.c +++ /dev/null @@ -1,254 +0,0 @@ -/* - * (C) Copyright 2008-2009 - * Andreas Pfefferle, DENX Software Engineering, ap@denx.de. - * - * (C) Copyright 2009 - * Detlev Zundel, DENX Software Engineering, dzu@denx.de. - * - * (C) Copyright 2004 - * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com. - * - * (C) Copyright 2004 - * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de - * - * (C) Copyright 2003-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <asm/io.h> -#include <common.h> -#include <mpc5xxx.h> -#include <pci.h> - -#if defined(CONFIG_DDR_MT46V16M16) -#include "mt46v16m16-75.h" -#elif defined(CONFIG_SDR_MT48LC16M16A2) -#include "mt48lc16m16a2-75.h" -#elif defined(CONFIG_DDR_MT46V32M16) -#include "mt46v32m16.h" -#elif defined(CONFIG_DDR_HYB25D512160BF) -#include "hyb25d512160bf.h" -#elif defined(CONFIG_DDR_K4H511638C) -#include "k4h511638c.h" -#else -#error "INKA4x0 SDRAM: invalid chip type specified!" -#endif - -DECLARE_GLOBAL_DATA_PTR; - -#ifndef CONFIG_SYS_RAMBOOT -static void sdram_start (int hi_addr) -{ - volatile struct mpc5xxx_sdram *sdram = - (struct mpc5xxx_sdram *)MPC5XXX_SDRAM; - long hi_addr_bit = hi_addr ? 0x01000000 : 0; - - /* unlock mode register */ - out_be32(&sdram->ctrl, SDRAM_CONTROL | 0x80000000 | hi_addr_bit); - - /* precharge all banks */ - out_be32(&sdram->ctrl, SDRAM_CONTROL | 0x80000002 | hi_addr_bit); - -#if SDRAM_DDR - /* set mode register: extended mode */ - out_be32(&sdram->mode, SDRAM_EMODE); - - /* set mode register: reset DLL */ - out_be32(&sdram->mode, SDRAM_MODE | 0x04000000); -#endif - - /* precharge all banks */ - out_be32(&sdram->ctrl, SDRAM_CONTROL | 0x80000002 | hi_addr_bit); - - /* auto refresh */ - out_be32(&sdram->ctrl, SDRAM_CONTROL | 0x80000004 | hi_addr_bit); - - /* set mode register */ - out_be32(&sdram->mode, SDRAM_MODE); - - /* normal operation */ - out_be32(&sdram->ctrl, SDRAM_CONTROL | hi_addr_bit); -} -#endif - -/* - * ATTENTION: Although partially referenced dram_init does NOT make real use - * use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE - * is something else than 0x00000000. - */ - -int dram_init(void) -{ - volatile struct mpc5xxx_mmap_ctl *mm = - (struct mpc5xxx_mmap_ctl *) CONFIG_SYS_MBAR; - volatile struct mpc5xxx_cdm *cdm = - (struct mpc5xxx_cdm *) MPC5XXX_CDM; - volatile struct mpc5xxx_sdram *sdram = - (struct mpc5xxx_sdram *) MPC5XXX_SDRAM; - ulong dramsize = 0; -#ifndef CONFIG_SYS_RAMBOOT - long test1, test2; - - /* setup SDRAM chip selects */ - out_be32(&mm->sdram0, 0x0000001c); /* 512MB at 0x0 */ - out_be32(&mm->sdram1, 0x40000000); /* disabled */ - - /* setup config registers */ - out_be32(&sdram->config1, SDRAM_CONFIG1); - out_be32(&sdram->config2, SDRAM_CONFIG2); - -#if SDRAM_DDR - /* set tap delay */ - out_be32(&cdm->porcfg, SDRAM_TAPDELAY); -#endif - - /* find RAM size using SDRAM CS0 only */ - sdram_start(0); - test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x20000000); - sdram_start(1); - test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x20000000); - if (test1 > test2) { - sdram_start(0); - dramsize = test1; - } else { - dramsize = test2; - } - - /* memory smaller than 1MB is impossible */ - if (dramsize < (1 << 20)) { - dramsize = 0; - } - - /* set SDRAM CS0 size according to the amount of RAM found */ - if (dramsize > 0) { - out_be32(&mm->sdram0, 0x13 + - __builtin_ffs(dramsize >> 20) - 1); - } else { - out_be32(&mm->sdram0, 0); /* disabled */ - } - - out_be32(&mm->sdram1, dramsize); /* disabled */ -#else /* CONFIG_SYS_RAMBOOT */ - - /* retrieve size of memory connected to SDRAM CS0 */ - dramsize = in_be32(&mm->sdram0) & 0xFF; - if (dramsize >= 0x13) { - dramsize = (1 << (dramsize - 0x13)) << 20; - } else { - dramsize = 0; - } -#endif /* CONFIG_SYS_RAMBOOT */ - - gd->ram_size = dramsize; - - return 0; -} - -int checkboard (void) -{ - puts ("Board: INKA 4X0\n"); - return 0; -} - -void flash_preinit(void) -{ - volatile struct mpc5xxx_lpb *lpb = (struct mpc5xxx_lpb *)MPC5XXX_LPB; - - /* - * Now, when we are in RAM, enable flash write - * access for detection process. - * Note that CS_BOOT (CS0) cannot be cleared when - * executing in flash. - */ - clrbits_be32(&lpb->cs0_cfg, 0x1); /* clear RO */ -} - -int misc_init_f (void) -{ - volatile struct mpc5xxx_gpio *gpio = - (struct mpc5xxx_gpio *) MPC5XXX_GPIO; - volatile struct mpc5xxx_wu_gpio *wu_gpio = - (struct mpc5xxx_wu_gpio *)MPC5XXX_WU_GPIO; - volatile struct mpc5xxx_gpt *gpt; - char tmp[10]; - int i, br; - - i = getenv_f("brightness", tmp, sizeof(tmp)); - br = (i > 0) - ? (int) simple_strtoul (tmp, NULL, 10) - : CONFIG_SYS_BRIGHTNESS; - if (br > 255) - br = 255; - - /* Initialize GPIO output pins. - */ - /* Configure GPT as GPIO output (and set them as they control low-active LEDs */ - for (i = 0; i <= 5; i++) { - gpt = (struct mpc5xxx_gpt *)(MPC5XXX_GPT + (i * 0x10)); - out_be32(&gpt->emsr, 0x34); - } - - /* Configure GPT7 as PWM timer, 1kHz, no ints. */ - gpt = (struct mpc5xxx_gpt *)(MPC5XXX_GPT + (7 * 0x10)); - out_be32(&gpt->emsr, 0); /* Disable */ - out_be32(&gpt->cir, 0x020000fe); - out_be32(&gpt->pwmcr, (br << 16)); - out_be32(&gpt->emsr, 0x3); /* Enable PWM mode and start */ - - /* Configure PSC3_6,7 as GPIO output */ - setbits_be32(&gpio->simple_gpioe, MPC5XXX_GPIO_SIMPLE_PSC3_6 | - MPC5XXX_GPIO_SIMPLE_PSC3_7); - setbits_be32(&gpio->simple_ddr, MPC5XXX_GPIO_SIMPLE_PSC3_6 | - MPC5XXX_GPIO_SIMPLE_PSC3_7); - - /* Configure PSC3_9 and GPIO_WKUP6,7 as GPIO output */ - setbits_8(&wu_gpio->enable, MPC5XXX_GPIO_WKUP_6 | - MPC5XXX_GPIO_WKUP_7 | - MPC5XXX_GPIO_WKUP_PSC3_9); - setbits_8(&wu_gpio->ddr, MPC5XXX_GPIO_WKUP_6 | - MPC5XXX_GPIO_WKUP_7 | - MPC5XXX_GPIO_WKUP_PSC3_9); - - /* Set LR mirror bit because it is low-active */ - setbits_8(&wu_gpio->dvo, MPC5XXX_GPIO_WKUP_7); - - /* Reset Coral-P graphics controller */ - setbits_8(&wu_gpio->dvo, MPC5XXX_GPIO_WKUP_PSC3_9); - - /* Enable display backlight */ - clrbits_8(&gpio->sint_inten, MPC5XXX_GPIO_SINT_PSC3_8); - setbits_8(&gpio->sint_gpioe, MPC5XXX_GPIO_SINT_PSC3_8); - setbits_8(&gpio->sint_ddr, MPC5XXX_GPIO_SINT_PSC3_8); - setbits_8(&gpio->sint_dvo, MPC5XXX_GPIO_SINT_PSC3_8); - - /* - * Configure three wire serial interface to RTC (PSC1_4, - * PSC2_4, PSC3_4, PSC3_5) - */ - setbits_8(&wu_gpio->enable, MPC5XXX_GPIO_WKUP_PSC1_4 | - MPC5XXX_GPIO_WKUP_PSC2_4); - setbits_8(&wu_gpio->ddr, MPC5XXX_GPIO_WKUP_PSC1_4 | - MPC5XXX_GPIO_WKUP_PSC2_4); - clrbits_8(&wu_gpio->dvo, MPC5XXX_GPIO_WKUP_PSC1_4); - clrbits_8(&gpio->sint_inten, MPC5XXX_GPIO_SINT_PSC3_4 | - MPC5XXX_GPIO_SINT_PSC3_5); - setbits_8(&gpio->sint_gpioe, MPC5XXX_GPIO_SINT_PSC3_4 | - MPC5XXX_GPIO_SINT_PSC3_5); - setbits_8(&gpio->sint_ddr, MPC5XXX_GPIO_SINT_PSC3_5); - clrbits_8(&gpio->sint_dvo, MPC5XXX_GPIO_SINT_PSC3_5); - - return 0; -} - -#ifdef CONFIG_PCI -static struct pci_controller hose; - -extern void pci_mpc5xxx_init(struct pci_controller *); - -void pci_init_board(void) -{ - pci_mpc5xxx_init(&hose); -} -#endif diff --git a/board/inka4x0/inkadiag.c b/board/inka4x0/inkadiag.c deleted file mode 100644 index 4c43205129..0000000000 --- a/board/inka4x0/inkadiag.c +++ /dev/null @@ -1,465 +0,0 @@ -/* - * (C) Copyright 2008, 2009 Andreas Pfefferle, - * DENX Software Engineering, ap@denx.de. - * (C) Copyright 2009 Detlev Zundel, - * DENX Software Engineering, dzu@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <asm/io.h> -#include <common.h> -#include <config.h> -#include <console.h> -#include <mpc5xxx.h> -#include <pci.h> - -#include <command.h> - -/* This is needed for the includes in ns16550.h */ -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#include <ns16550.h> - -#define GPIO_BASE ((u_char *)CONFIG_SYS_CS3_START) - -#define DIGIN_TOUCHSCR_MASK 0x00003000 /* Inputs 12-13 */ -#define DIGIN_KEYB_MASK 0x00010000 /* Input 16 */ - -#define DIGIN_DRAWER_SW1 0x00400000 /* Input 22 */ -#define DIGIN_DRAWER_SW2 0x00800000 /* Input 23 */ - -#define DIGIO_LED0 0x00000001 /* Output 0 */ -#define DIGIO_LED1 0x00000002 /* Output 1 */ -#define DIGIO_LED2 0x00000004 /* Output 2 */ -#define DIGIO_LED3 0x00000008 /* Output 3 */ -#define DIGIO_LED4 0x00000010 /* Output 4 */ -#define DIGIO_LED5 0x00000020 /* Output 5 */ - -#define DIGIO_DRAWER1 0x00000100 /* Output 8 */ -#define DIGIO_DRAWER2 0x00000200 /* Output 9 */ - -#define SERIAL_PORT_BASE ((u_char *)CONFIG_SYS_CS2_START) - -#define PSC_OP1_RTS 0x01 -#define PSC_OP0_RTS 0x01 - -/* - * Table with supported baudrates (defined in inka4x0.h) - */ -static const unsigned long baudrate_table[] = CONFIG_SYS_BAUDRATE_TABLE; -#define N_BAUDRATES (sizeof(baudrate_table) / sizeof(baudrate_table[0])) - -static unsigned int inka_digin_get_input(void) -{ - return in_8(GPIO_BASE + 0) << 0 | in_8(GPIO_BASE + 1) << 8 | - in_8(GPIO_BASE + 2) << 16 | in_8(GPIO_BASE + 3) << 24; -} - -#define LED_HIGH(NUM) \ - do { \ - setbits_be32((unsigned *)MPC5XXX_GPT##NUM##_ENABLE, 0x10); \ - } while (0) - -#define LED_LOW(NUM) \ - do { \ - clrbits_be32((unsigned *)MPC5XXX_GPT##NUM##_ENABLE, 0x10); \ - } while (0) - -#define CHECK_LED(NUM) \ - do { \ - if (state & (1 << NUM)) { \ - LED_HIGH(NUM); \ - } else { \ - LED_LOW(NUM); \ - } \ - } while (0) - -static void inka_digio_set_output(unsigned int state, int which) -{ - volatile struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio *)MPC5XXX_GPIO; - - if (which == 0) { - /* other */ - CHECK_LED(0); - CHECK_LED(1); - CHECK_LED(2); - CHECK_LED(3); - CHECK_LED(4); - CHECK_LED(5); - } else { - if (which == 1) { - /* drawer1 */ - if (state) { - clrbits_be32(&gpio->simple_dvo, 0x1000); - udelay(1); - setbits_be32(&gpio->simple_dvo, 0x1000); - } else { - setbits_be32(&gpio->simple_dvo, 0x1000); - udelay(1); - clrbits_be32(&gpio->simple_dvo, 0x1000); - } - } - if (which == 2) { - /* drawer 2 */ - if (state) { - clrbits_be32(&gpio->simple_dvo, 0x2000); - udelay(1); - setbits_be32(&gpio->simple_dvo, 0x2000); - } else { - setbits_be32(&gpio->simple_dvo, 0x2000); - udelay(1); - clrbits_be32(&gpio->simple_dvo, 0x2000); - } - } - } - udelay(1); -} - -static int do_inkadiag_io(cmd_tbl_t *cmdtp, int flag, int argc, - char * const argv[]) { - unsigned int state, val; - - switch (argc) { - case 3: - /* Write a value */ - val = simple_strtol(argv[2], NULL, 16); - - if (strcmp(argv[1], "drawer1") == 0) { - inka_digio_set_output(val, 1); - } else if (strcmp(argv[1], "drawer2") == 0) { - inka_digio_set_output(val, 2); - } else if (strcmp(argv[1], "other") == 0) - inka_digio_set_output(val, 0); - else { - printf("Invalid argument: %s\n", argv[1]); - return -1; - } - /* fall through */ - case 2: - /* Read a value */ - state = inka_digin_get_input(); - - if (strcmp(argv[1], "drawer1") == 0) { - val = (state & DIGIN_DRAWER_SW1) >> (ffs(DIGIN_DRAWER_SW1) - 1); - } else if (strcmp(argv[1], "drawer2") == 0) { - val = (state & DIGIN_DRAWER_SW2) >> (ffs(DIGIN_DRAWER_SW2) - 1); - } else if (strcmp(argv[1], "other") == 0) { - val = ((state & DIGIN_KEYB_MASK) >> (ffs(DIGIN_KEYB_MASK) - 1)) - | (state & DIGIN_TOUCHSCR_MASK) >> (ffs(DIGIN_TOUCHSCR_MASK) - 2); - } else { - printf("Invalid argument: %s\n", argv[1]); - return -1; - } - printf("exit code: 0x%X\n", val); - return 0; - default: - return cmd_usage(cmdtp); - } - - return -1; -} - -DECLARE_GLOBAL_DATA_PTR; - -static int ser_init(volatile struct mpc5xxx_psc *psc, int baudrate) -{ - unsigned long baseclk; - int div; - - /* reset PSC */ - out_8(&psc->command, PSC_SEL_MODE_REG_1); - - /* select clock sources */ - - out_be16(&psc->psc_clock_select, 0); - baseclk = (gd->arch.ipb_clk + 16) / 32; - - /* switch to UART mode */ - out_be32(&psc->sicr, 0); - - /* configure parity, bit length and so on */ - - out_8(&psc->mode, PSC_MODE_8_BITS | PSC_MODE_PARNONE); - out_8(&psc->mode, PSC_MODE_ONE_STOP); - - /* set up UART divisor */ - div = (baseclk + (baudrate / 2)) / baudrate; - out_8(&psc->ctur, (div >> 8) & 0xff); - out_8(&psc->ctlr, div & 0xff); - - /* disable all interrupts */ - out_be16(&psc->psc_imr, 0); - - /* reset and enable Rx/Tx */ - out_8(&psc->command, PSC_RST_RX); - out_8(&psc->command, PSC_RST_TX); - out_8(&psc->command, PSC_RX_ENABLE | PSC_TX_ENABLE); - - return 0; -} - -static void ser_putc(volatile struct mpc5xxx_psc *psc, const char c) -{ - /* Wait 1 second for last character to go. */ - int i = 0; - - while (!(psc->psc_status & PSC_SR_TXEMP) && (i++ < 1000000/10)) - udelay(10); - psc->psc_buffer_8 = c; - -} - -static int ser_getc(volatile struct mpc5xxx_psc *psc) -{ - /* Wait for a character to arrive. */ - int i = 0; - - while (!(in_be16(&psc->psc_status) & PSC_SR_RXRDY) && (i++ < 1000000/10)) - udelay(10); - - return in_8(&psc->psc_buffer_8); -} - -static int do_inkadiag_serial(cmd_tbl_t *cmdtp, int flag, int argc, - char * const argv[]) { - volatile struct NS16550 *uart; - volatile struct mpc5xxx_psc *psc; - unsigned int num, mode; - int combrd, baudrate, i, j, len; - int address; - - if (argc < 5) - return cmd_usage(cmdtp); - - argc--; - argv++; - - num = simple_strtol(argv[0], NULL, 0); - if (num < 0 || num > 11) { - printf("invalid argument for num: %d\n", num); - return -1; - } - - mode = simple_strtol(argv[1], NULL, 0); - - combrd = 0; - baudrate = simple_strtoul(argv[2], NULL, 10); - for (i=0; i<N_BAUDRATES; ++i) { - if (baudrate == baudrate_table[i]) - break; - } - if (i == N_BAUDRATES) { - printf("## Baudrate %d bps not supported\n", - baudrate); - return 1; - } - combrd = 115200 / baudrate; - - uart = (struct NS16550 *)(SERIAL_PORT_BASE + (num << 3)); - - printf("Testing uart %d.\n\n", num); - - if ((num >= 0) && (num <= 7)) { - if (mode & 1) { - /* turn on 'loopback' mode */ - out_8(&uart->mcr, UART_MCR_LOOP); - } else { - /* - * establish the UART's operational parameters - * set DLAB=1, so rbr accesses DLL - */ - out_8(&uart->lcr, UART_LCR_DLAB); - /* set baudrate */ - out_8(&uart->rbr, combrd); - /* set data-format: 8-N-1 */ - out_8(&uart->lcr, UART_LCR_WLS_8); - } - - if (mode & 2) { - /* set request to send */ - out_8(&uart->mcr, UART_MCR_RTS); - udelay(10); - /* check clear to send */ - if ((in_8(&uart->msr) & UART_MSR_CTS) == 0x00) - return -1; - } - if (mode & 4) { - /* set data terminal ready */ - out_8(&uart->mcr, UART_MCR_DTR); - udelay(10); - /* check data set ready and carrier detect */ - if ((in_8(&uart->msr) & (UART_MSR_DSR | UART_MSR_DCD)) - != (UART_MSR_DSR | UART_MSR_DCD)) - return -1; - } - - /* write each message-character, read it back, and display it */ - for (i = 0, len = strlen(argv[3]); i < len; ++i) { - j = 0; - while ((in_8(&uart->lsr) & UART_LSR_THRE) == 0x00) { - if (j++ > CONFIG_SYS_HZ) - break; - udelay(10); - } - out_8(&uart->rbr, argv[3][i]); - j = 0; - while ((in_8(&uart->lsr) & UART_LSR_DR) == 0x00) { - if (j++ > CONFIG_SYS_HZ) - break; - udelay(10); - } - printf("%c", in_8(&uart->rbr)); - } - printf("\n\n"); - out_8(&uart->mcr, 0x00); - } else { - address = 0; - - switch (num) { - case 8: - address = MPC5XXX_PSC6; - break; - case 9: - address = MPC5XXX_PSC3; - break; - case 10: - address = MPC5XXX_PSC2; - break; - case 11: - address = MPC5XXX_PSC1; - break; - } - psc = (struct mpc5xxx_psc *)address; - ser_init(psc, simple_strtol(argv[2], NULL, 0)); - if (mode & 2) { - /* set request to send */ - out_8(&psc->op0, PSC_OP0_RTS); - udelay(10); - /* check clear to send */ - if ((in_8(&psc->ip) & PSC_IPCR_CTS) == 0) - return -1; - } - len = strlen(argv[3]); - for (i = 0; i < len; ++i) { - ser_putc(psc, argv[3][i]); - printf("%c", ser_getc(psc)); - } - printf("\n\n"); - } - return 0; -} - -#define BUZZER_GPT (MPC5XXX_GPT + 0x60) /* GPT6 */ -static void buzzer_turn_on(unsigned int freq) -{ - volatile struct mpc5xxx_gpt *gpt = (struct mpc5xxx_gpt *)(BUZZER_GPT); - - const u32 prescale = gd->arch.ipb_clk / freq / 128; - const u32 count = 128; - const u32 width = 64; - - gpt->cir = (prescale << 16) | count; - gpt->pwmcr = width << 16; - gpt->emsr = 3; /* Timer enabled for PWM */ -} - -static void buzzer_turn_off(void) -{ - volatile struct mpc5xxx_gpt *gpt = (struct mpc5xxx_gpt *)(BUZZER_GPT); - - gpt->emsr = 0; -} - -static int do_inkadiag_buzzer(cmd_tbl_t *cmdtp, int flag, int argc, - char * const argv[]) { - - unsigned int period, freq; - int prev, i; - - if (argc != 3) - return cmd_usage(cmdtp); - - argc--; - argv++; - - period = simple_strtol(argv[0], NULL, 0); - if (!period) - printf("Zero period is senseless\n"); - argc--; - argv++; - - freq = simple_strtol(argv[0], NULL, 0); - /* avoid zero prescale in buzzer_turn_on() */ - if (freq > gd->arch.ipb_clk / 128) { - printf("%dHz exceeds maximum (%ldHz)\n", freq, - gd->arch.ipb_clk / 128); - } else if (!freq) - printf("Zero frequency is senseless\n"); - else - buzzer_turn_on(freq); - - clear_ctrlc(); - prev = disable_ctrlc(0); - - printf("Buzzing for %d ms. Type ^C to abort!\n\n", period); - - i = 0; - while (!ctrlc() && (i++ < CONFIG_SYS_HZ)) - udelay(period); - - clear_ctrlc(); - disable_ctrlc(prev); - - buzzer_turn_off(); - - return 0; -} - -static int do_inkadiag_help(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]); - -cmd_tbl_t cmd_inkadiag_sub[] = { - U_BOOT_CMD_MKENT(io, 1, 1, do_inkadiag_io, "read digital input", - "<drawer1|drawer2|other> [value] - get or set specified signal"), - U_BOOT_CMD_MKENT(serial, 4, 1, do_inkadiag_serial, "test serial port", - "<num> <mode> <baudrate> <msg> - test uart num [0..11] in mode\n" - "and baudrate with msg"), - U_BOOT_CMD_MKENT(buzzer, 2, 1, do_inkadiag_buzzer, "activate buzzer", - "<period> <freq> - turn buzzer on for period ms with freq hz"), - U_BOOT_CMD_MKENT(help, 4, 1, do_inkadiag_help, "get help", - "[command] - get help for command"), -}; - -static int do_inkadiag_help(cmd_tbl_t *cmdtp, int flag, - int argc, char * const argv[]) { - extern int _do_help (cmd_tbl_t *cmd_start, int cmd_items, - cmd_tbl_t *cmdtp, int flag, - int argc, char * const argv[]); - /* do_help prints command name - we prepend inkadiag to our subcommands! */ -#ifdef CONFIG_SYS_LONGHELP - puts ("inkadiag "); -#endif - return _do_help(&cmd_inkadiag_sub[0], - ARRAY_SIZE(cmd_inkadiag_sub), cmdtp, flag, argc, argv); -} - -static int do_inkadiag(cmd_tbl_t *cmdtp, int flag, int argc, - char * const argv[]) { - cmd_tbl_t *c; - - c = find_cmd_tbl(argv[1], &cmd_inkadiag_sub[0], ARRAY_SIZE(cmd_inkadiag_sub)); - - if (c) { - argc--; - argv++; - return c->cmd(c, flag, argc, argv); - } else { - /* Unrecognized command */ - return cmd_usage(cmdtp); - } -} - -U_BOOT_CMD(inkadiag, 6, 1, do_inkadiag, - "inkadiag - inka diagnosis\n", - "[inkadiag what ...]\n" - " - perform a diagnosis on inka hardware\n" - "'inkadiag' performs hardware tests."); diff --git a/board/inka4x0/k4h511638c.h b/board/inka4x0/k4h511638c.h deleted file mode 100644 index 054ddafd59..0000000000 --- a/board/inka4x0/k4h511638c.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * Copyright (C) 2007 Semihalf - * Written by Marian Balakowicz m8@semihalf.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#define SDRAM_DDR 1 /* is DDR */ - -/* Settings for XLB = 132 MHz */ -#define SDRAM_MODE 0x018D0000 -#define SDRAM_EMODE 0x40090000 -#define SDRAM_CONTROL 0x714F0F00 -#define SDRAM_CONFIG1 0x73722930 -#define SDRAM_CONFIG2 0x46770000 -#define SDRAM_TAPDELAY 0x10000000 diff --git a/board/inka4x0/mt46v16m16-75.h b/board/inka4x0/mt46v16m16-75.h deleted file mode 100644 index 23fc6f06be..0000000000 --- a/board/inka4x0/mt46v16m16-75.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * (C) Copyright 2004 - * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#define SDRAM_DDR 1 /* is DDR */ - -/* Settings for XLB = 132 MHz */ -#define SDRAM_MODE 0x018D0000 -#define SDRAM_EMODE 0x40090000 -#define SDRAM_CONTROL 0x714F0F00 -#define SDRAM_CONFIG1 0x73722930 -#define SDRAM_CONFIG2 0x47770000 -#define SDRAM_TAPDELAY 0x10000000 diff --git a/board/inka4x0/mt46v32m16-75.h b/board/inka4x0/mt46v32m16-75.h deleted file mode 100644 index f16f450d01..0000000000 --- a/board/inka4x0/mt46v32m16-75.h +++ /dev/null @@ -1,16 +0,0 @@ -/* - * Copyright (C) 2007 Semihalf - * Written by Marian Balakowicz m8@semihalf.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#define SDRAM_DDR 1 /* is DDR */ - -/* Settings for XLB = 132 MHz */ -#define SDRAM_MODE 0x018D0000 -#define SDRAM_EMODE 0x40090000 -#define SDRAM_CONTROL 0x714F0F00 -#define SDRAM_CONFIG1 0x73711930 -#define SDRAM_CONFIG2 0x46770000 -#define SDRAM_TAPDELAY 0x10000000 diff --git a/board/inka4x0/mt48lc16m16a2-75.h b/board/inka4x0/mt48lc16m16a2-75.h deleted file mode 100644 index 0133eaa2ca..0000000000 --- a/board/inka4x0/mt48lc16m16a2-75.h +++ /dev/null @@ -1,14 +0,0 @@ -/* - * (C) Copyright 2004 - * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#define SDRAM_DDR 0 /* is SDR */ - -/* Settings for XLB = 132 MHz */ -#define SDRAM_MODE 0x00CD0000 -#define SDRAM_CONTROL 0x504F0000 -#define SDRAM_CONFIG1 0xD2322800 -#define SDRAM_CONFIG2 0x8AD70000 diff --git a/board/intercontrol/digsy_mtc/Kconfig b/board/intercontrol/digsy_mtc/Kconfig deleted file mode 100644 index 1cf2275d81..0000000000 --- a/board/intercontrol/digsy_mtc/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_DIGSY_MTC - -config SYS_BOARD - default "digsy_mtc" - -config SYS_VENDOR - default "intercontrol" - -config SYS_CONFIG_NAME - default "digsy_mtc" - -endif diff --git a/board/intercontrol/digsy_mtc/MAINTAINERS b/board/intercontrol/digsy_mtc/MAINTAINERS deleted file mode 100644 index c83ebcdab9..0000000000 --- a/board/intercontrol/digsy_mtc/MAINTAINERS +++ /dev/null @@ -1,9 +0,0 @@ -DIGSY_MTC BOARD -M: Werner Pfister Pfister_Werner@intercontrol.de -S: Maintained -F: board/intercontrol/digsy_mtc/ -F: include/configs/digsy_mtc.h -F: configs/digsy_mtc_defconfig -F: configs/digsy_mtc_RAMBOOT_defconfig -F: configs/digsy_mtc_rev5_defconfig -F: configs/digsy_mtc_rev5_RAMBOOT_defconfig diff --git a/board/intercontrol/digsy_mtc/Makefile b/board/intercontrol/digsy_mtc/Makefile deleted file mode 100644 index 4d13eadf5b..0000000000 --- a/board/intercontrol/digsy_mtc/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# Author: Grzegorz Bernacki, Semihalf, gjb@semihalf.com -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := digsy_mtc.o -obj-$(CONFIG_VIDEO) += cmd_disp.o diff --git a/board/intercontrol/digsy_mtc/cmd_disp.c b/board/intercontrol/digsy_mtc/cmd_disp.c deleted file mode 100644 index 2ffa8bfe40..0000000000 --- a/board/intercontrol/digsy_mtc/cmd_disp.c +++ /dev/null @@ -1,41 +0,0 @@ -/* - * (C) Copyright 2011 DENX Software Engineering, - * Anatolij Gustschin agust@denx.de - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <command.h> -#include <mpc5xxx.h> -#include <asm/io.h> - -#define GPIO_USB1_0 0x00010000 - -static int cmd_disp(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio *)MPC5XXX_GPIO; - - if (argc < 2) { - printf("%s\n", - in_be32(&gpio->simple_dvo) & GPIO_USB1_0 ? "on" : "off"); - return 0; - } - - if (!strncmp(argv[1], "on", 2)) { - setbits_be32(&gpio->simple_dvo, GPIO_USB1_0); - } else if (!strncmp(argv[1], "off", 3)) { - clrbits_be32(&gpio->simple_dvo, GPIO_USB1_0); - } else { - cmd_usage(cmdtp); - return 1; - } - return 0; -} - -U_BOOT_CMD(disp, 2, 1, cmd_disp, - "disp [on/off] - switch display on/off", - "\n - print display on/off status\n" - "on\n - turn on\n" - "off\n - turn off\n" -); diff --git a/board/intercontrol/digsy_mtc/digsy_mtc.c b/board/intercontrol/digsy_mtc/digsy_mtc.c deleted file mode 100644 index 6c33eeb022..0000000000 --- a/board/intercontrol/digsy_mtc/digsy_mtc.c +++ /dev/null @@ -1,477 +0,0 @@ -/* - * (C) Copyright 2003 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * (C) Copyright 2004 - * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com. - * - * (C) Copyright 2005-2009 - * Modified for InterControl digsyMTC MPC5200 board by - * Frank Bodammer, GCD Hard- & Software GmbH, - * frank.bodammer@gcd-solutions.de - * - * (C) Copyright 2009 - * Grzegorz Bernacki, Semihalf, gjb@semihalf.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <mpc5xxx.h> -#include <net.h> -#include <pci.h> -#include <asm/processor.h> -#include <asm/io.h> -#include "eeprom.h" -#if defined(CONFIG_DIGSY_REV5) -#include "is45s16800a2.h" -#include <mtd/cfi_flash.h> -#include <flash.h> -#else -#include "is42s16800a-7t.h" -#endif -#include <libfdt.h> -#include <fdt_support.h> -#include <i2c.h> -#include <mb862xx.h> - -DECLARE_GLOBAL_DATA_PTR; - -extern int usb_cpu_init(void); - -#if defined(CONFIG_DIGSY_REV5) -/* - * The M29W128GH needs a special reset command function, - * details see the doc/README.cfi file - */ -void flash_cmd_reset(flash_info_t *info) -{ - flash_write_cmd(info, 0, 0, AMD_CMD_RESET); -} -#endif - -#ifndef CONFIG_SYS_RAMBOOT -static void sdram_start(int hi_addr) -{ - long hi_addr_bit = hi_addr ? 0x01000000 : 0; - long control = SDRAM_CONTROL | hi_addr_bit; - - /* unlock mode register */ - out_be32((void *)MPC5XXX_SDRAM_CTRL, control | 0x80000000); - - /* precharge all banks */ - out_be32((void *)MPC5XXX_SDRAM_CTRL, control | 0x80000002); - - /* auto refresh */ - out_be32((void *)MPC5XXX_SDRAM_CTRL, control | 0x80000004); - - /* set mode register */ - out_be32((void *)MPC5XXX_SDRAM_MODE, SDRAM_MODE); - - /* normal operation */ - out_be32((void *)MPC5XXX_SDRAM_CTRL, control); -} -#endif - -/* - * ATTENTION: Although partially referenced dram_init does NOT make real use - * use of CONFIG_SYS_SDRAM_BASE. The code does not work if - * CONFIG_SYS_SDRAM_BASE is something other than 0x00000000. - */ - -int dram_init(void) -{ - ulong dramsize = 0; - ulong dramsize2 = 0; - uint svr, pvr; -#ifndef CONFIG_SYS_RAMBOOT - ulong test1, test2; - - /* setup SDRAM chip selects */ - out_be32((void *)MPC5XXX_SDRAM_CS0CFG, 0x0000001C); /* 512MB at 0x0 */ - out_be32((void *)MPC5XXX_SDRAM_CS1CFG, 0x80000000); /* disabled */ - - /* setup config registers */ - out_be32((void *)MPC5XXX_SDRAM_CONFIG1, SDRAM_CONFIG1); - out_be32((void *)MPC5XXX_SDRAM_CONFIG2, SDRAM_CONFIG2); - - /* find RAM size using SDRAM CS0 only */ - sdram_start(0); - test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x08000000); - sdram_start(1); - test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x08000000); - if (test1 > test2) { - sdram_start(0); - dramsize = test1; - } else { - dramsize = test2; - } - - /* memory smaller than 1MB is impossible */ - if (dramsize < (1 << 20)) - dramsize = 0; - - /* set SDRAM CS0 size according to the amount of RAM found */ - if (dramsize > 0) { - out_be32((void *)MPC5XXX_SDRAM_CS0CFG, - (0x13 + __builtin_ffs(dramsize >> 20) - 1)); - } else { - out_be32((void *)MPC5XXX_SDRAM_CS0CFG, 0); /* disabled */ - } - - /* let SDRAM CS1 start right after CS0 */ - out_be32((void *)MPC5XXX_SDRAM_CS1CFG, dramsize + 0x0000001C); - - /* find RAM size using SDRAM CS1 only */ - test1 = get_ram_size((long *)(CONFIG_SYS_SDRAM_BASE + dramsize), - 0x08000000); - dramsize2 = test1; - - /* memory smaller than 1MB is impossible */ - if (dramsize2 < (1 << 20)) - dramsize2 = 0; - - /* set SDRAM CS1 size according to the amount of RAM found */ - if (dramsize2 > 0) { - out_be32((void *)MPC5XXX_SDRAM_CS1CFG, (dramsize | - (0x13 + __builtin_ffs(dramsize2 >> 20) - 1))); - } else { - out_be32((void *)MPC5XXX_SDRAM_CS1CFG, dramsize); /* disabled */ - } - -#else /* CONFIG_SYS_RAMBOOT */ - - /* retrieve size of memory connected to SDRAM CS0 */ - dramsize = in_be32((void *)MPC5XXX_SDRAM_CS0CFG) & 0xFF; - if (dramsize >= 0x13) - dramsize = (1 << (dramsize - 0x13)) << 20; - else - dramsize = 0; - - /* retrieve size of memory connected to SDRAM CS1 */ - dramsize2 = in_be32((void *)MPC5XXX_SDRAM_CS1CFG) & 0xFF; - if (dramsize2 >= 0x13) - dramsize2 = (1 << (dramsize2 - 0x13)) << 20; - else - dramsize2 = 0; - -#endif /* CONFIG_SYS_RAMBOOT */ - - /* - * On MPC5200B we need to set the special configuration delay in the - * DDR controller. Please refer to Freescale's AN3221 "MPC5200B SDRAM - * Initialization and Configuration", 3.3.1 SDelay--MBAR + 0x0190: - * - * "The SDelay should be written to a value of 0x00000004. It is - * required to account for changes caused by normal wafer processing - * parameters." - */ - svr = get_svr(); - pvr = get_pvr(); - if ((SVR_MJREV(svr) >= 2) && - (PVR_MAJ(pvr) == 1) && (PVR_MIN(pvr) == 4)) - out_be32((void *)MPC5XXX_SDRAM_SDELAY, 0x04); - - gd->ram_size = dramsize + dramsize2; - - return 0; -} - -int checkboard(void) -{ - char buf[64]; - int i = getenv_f("serial#", buf, sizeof(buf)); - - puts ("Board: InterControl digsyMTC"); -#if defined(CONFIG_DIGSY_REV5) - puts (" rev5"); -#endif - if (i > 0) { - puts(", "); - puts(buf); - } - putc('\n'); - - return 0; -} - -#if defined(CONFIG_VIDEO) - -#define GPIO_USB1_0 0x00010000 /* Power-On pin */ -#define GPIO_USB1_9 0x08 /* PX_~EN pin */ - -#define GPIO_EE_DO 0x10 /* PSC6_0 (DO) pin */ -#define GPIO_EE_CTS 0x20 /* PSC6_1 (CTS) pin */ -#define GPIO_EE_DI 0x10000000 /* PSC6_2 (DI) pin */ -#define GPIO_EE_CLK 0x20000000 /* PSC6_3 (CLK) pin */ - -#define GPT_GPIO_ON 0x00000034 /* GPT as simple GPIO, high */ - -static void exbo_hw_init(void) -{ - struct mpc5xxx_gpt *gpt = (struct mpc5xxx_gpt *)MPC5XXX_GPT; - struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio *)MPC5XXX_GPIO; - struct mpc5xxx_wu_gpio *wu_gpio = - (struct mpc5xxx_wu_gpio *)MPC5XXX_WU_GPIO; - - /* configure IrDA pins (PSC6 port) as gpios */ - gpio->port_config &= 0xFF8FFFFF; - - /* Init for USB1_0, EE_CLK and EE_DI - Low */ - setbits_be32(&gpio->simple_ddr, - GPIO_USB1_0 | GPIO_EE_CLK | GPIO_EE_DI); - clrbits_be32(&gpio->simple_ode, - GPIO_USB1_0 | GPIO_EE_CLK | GPIO_EE_DI); - clrbits_be32(&gpio->simple_dvo, - GPIO_USB1_0 | GPIO_EE_CLK | GPIO_EE_DI); - setbits_be32(&gpio->simple_gpioe, - GPIO_USB1_0 | GPIO_EE_CLK | GPIO_EE_DI); - - /* Init for EE_DO, EE_CTS - Input */ - clrbits_8(&wu_gpio->ddr, GPIO_EE_DO | GPIO_EE_CTS); - setbits_8(&wu_gpio->enable, GPIO_EE_DO | GPIO_EE_CTS); - - /* Init for PX_~EN (USB1_9) - High */ - clrbits_8(&gpio->sint_ode, GPIO_USB1_9); - setbits_8(&gpio->sint_ddr, GPIO_USB1_9); - clrbits_8(&gpio->sint_inten, GPIO_USB1_9); - setbits_8(&gpio->sint_dvo, GPIO_USB1_9); - setbits_8(&gpio->sint_gpioe, GPIO_USB1_9); - - /* Init for ~OE Switch (GPIO3) - Timer_0 GPIO High */ - out_be32(&gpt[0].emsr, GPT_GPIO_ON); - /* Init for S Switch (GPIO4) - Timer_1 GPIO High */ - out_be32(&gpt[1].emsr, GPT_GPIO_ON); - - /* Power-On camera supply */ - setbits_be32(&gpio->simple_dvo, GPIO_USB1_0); -} -#else -static inline void exbo_hw_init(void) {} -#endif /* CONFIG_VIDEO */ - -int board_early_init_r(void) -{ - /* - * Now, when we are in RAM, enable flash write access for detection - * process. Note that CS_BOOT cannot be cleared when executing in - * flash. - */ - /* disable CS_BOOT */ - clrbits_be32((void *)MPC5XXX_ADDECR, (1 << 25)); - /* enable CS1 */ - setbits_be32((void *)MPC5XXX_ADDECR, (1 << 17)); - /* enable CS0 */ - setbits_be32((void *)MPC5XXX_ADDECR, (1 << 16)); - -#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT) - /* Low level USB init, required for proper kernel operation */ - usb_cpu_init(); -#endif - - return (0); -} - -void board_get_enetaddr (uchar * enet) -{ - ushort read = 0; - ushort addr_of_eth_addr = 0; - ushort len_sys = 0; - ushort len_sys_cfg = 0; - - /* check identification word */ - eeprom_read(EEPROM_ADDR, EEPROM_ADDR_IDENT, (uchar *)&read, 2); - if (read != EEPROM_IDENT) - return; - - /* calculate offset of config area */ - eeprom_read(EEPROM_ADDR, EEPROM_ADDR_LEN_SYS, (uchar *)&len_sys, 2); - eeprom_read(EEPROM_ADDR, EEPROM_ADDR_LEN_SYSCFG, - (uchar *)&len_sys_cfg, 2); - addr_of_eth_addr = (len_sys + len_sys_cfg + EEPROM_ADDR_ETHADDR) << 1; - if (addr_of_eth_addr >= EEPROM_LEN) - return; - - eeprom_read(EEPROM_ADDR, addr_of_eth_addr, enet, 6); -} - -int misc_init_r(void) -{ - pci_dev_t devbusfn; - uchar enetaddr[6]; - - /* check if graphic extension board is present */ - devbusfn = pci_find_device(PCI_VENDOR_ID_FUJITSU, - PCI_DEVICE_ID_CORAL_PA, 0); - if (devbusfn != -1) - exbo_hw_init(); - - if (!eth_getenv_enetaddr("ethaddr", enetaddr)) { - board_get_enetaddr(enetaddr); - eth_setenv_enetaddr("ethaddr", enetaddr); - } - - return 0; -} - -#ifdef CONFIG_PCI -static struct pci_controller hose; - -extern void pci_mpc5xxx_init(struct pci_controller *); - -void pci_init_board(void) -{ - pci_mpc5xxx_init(&hose); -} -#endif - -#ifdef CONFIG_IDE - -#ifdef CONFIG_IDE_RESET - -void init_ide_reset(void) -{ - debug ("init_ide_reset\n"); - - /* set gpio output value to 1 */ - setbits_be32((void *)MPC5XXX_WU_GPIO_DATA_O, (1 << 25)); - /* open drain output */ - setbits_be32((void *)MPC5XXX_WU_GPIO_ODE, (1 << 25)); - /* direction output */ - setbits_be32((void *)MPC5XXX_WU_GPIO_DIR, (1 << 25)); - /* enable gpio */ - setbits_be32((void *)MPC5XXX_WU_GPIO_ENABLE, (1 << 25)); - -} - -void ide_set_reset(int idereset) -{ - debug ("ide_reset(%d)\n", idereset); - - /* set gpio output value to 0 */ - clrbits_be32((void *)MPC5XXX_WU_GPIO_DATA_O, (1 << 25)); - /* open drain output */ - setbits_be32((void *)MPC5XXX_WU_GPIO_ODE, (1 << 25)); - /* direction output */ - setbits_be32((void *)MPC5XXX_WU_GPIO_DIR, (1 << 25)); - /* enable gpio */ - setbits_be32((void *)MPC5XXX_WU_GPIO_ENABLE, (1 << 25)); - - udelay(10000); - - /* set gpio output value to 1 */ - setbits_be32((void *)MPC5XXX_WU_GPIO_DATA_O, (1 << 25)); - /* open drain output */ - setbits_be32((void *)MPC5XXX_WU_GPIO_ODE, (1 << 25)); - /* direction output */ - setbits_be32((void *)MPC5XXX_WU_GPIO_DIR, (1 << 25)); - /* enable gpio */ - setbits_be32((void *)MPC5XXX_WU_GPIO_ENABLE, (1 << 25)); -} -#endif /* CONFIG_IDE_RESET */ -#endif /* CONFIG_IDE */ - -#ifdef CONFIG_OF_BOARD_SETUP -static void ft_delete_node(void *fdt, const char *compat) -{ - int off = -1; - int ret; - - off = fdt_node_offset_by_compatible(fdt, -1, compat); - if (off < 0) { - printf("Could not find %s node.\n", compat); - return; - } - - ret = fdt_del_node(fdt, off); - if (ret < 0) - printf("Could not delete %s node.\n", compat); -} -#if defined(CONFIG_SYS_UPDATE_FLASH_SIZE) -static void ft_adapt_flash_base(void *blob) -{ - flash_info_t *dev = &flash_info[0]; - int off; - struct fdt_property *prop; - int len; - u32 *reg, *reg2; - - off = fdt_node_offset_by_compatible(blob, -1, "fsl,mpc5200b-lpb"); - if (off < 0) { - printf("Could not find fsl,mpc5200b-lpb node.\n"); - return; - } - - /* found compatible property */ - prop = fdt_get_property_w(blob, off, "ranges", &len); - if (prop) { - reg = reg2 = (u32 *)&prop->data[0]; - - reg[2] = dev->start[0]; - reg[3] = dev->size; - fdt_setprop(blob, off, "ranges", reg2, len); - } else - printf("Could not find ranges\n"); -} - -extern ulong flash_get_size (phys_addr_t base, int banknum); - -/* Update the Flash Baseaddr settings */ -int update_flash_size (int flash_size) -{ - volatile struct mpc5xxx_mmap_ctl *mm = - (struct mpc5xxx_mmap_ctl *) CONFIG_SYS_MBAR; - flash_info_t *dev; - int i; - int size = 0; - unsigned long base = 0x0; - u32 *cs_reg = (u32 *)&mm->cs0_start; - - for (i = 0; i < 2; i++) { - dev = &flash_info[i]; - - if (dev->size) { - /* calculate new base addr for this chipselect */ - base -= dev->size; - out_be32(cs_reg, START_REG(base)); - cs_reg++; - out_be32(cs_reg, STOP_REG(base, dev->size)); - cs_reg++; - /* recalculate the sectoraddr in the cfi driver */ - size += flash_get_size(base, i); - } - } - flash_protect_default(); - gd->bd->bi_flashstart = base; - return 0; -} -#endif /* defined(CONFIG_SYS_UPDATE_FLASH_SIZE) */ - -int ft_board_setup(void *blob, bd_t *bd) -{ - int phy_addr = CONFIG_PHY_ADDR; - char eth_path[] = "/soc5200@f0000000/mdio@3000/ethernet-phy@0"; - - ft_cpu_setup(blob, bd); - /* - * There are 2 RTC nodes in the DTS, so remove - * the unneeded node here. - */ -#if defined(CONFIG_DIGSY_REV5) - ft_delete_node(blob, "dallas,ds1339"); -#else - ft_delete_node(blob, "mc,rv3029c2"); -#endif -#if defined(CONFIG_SYS_UPDATE_FLASH_SIZE) -#ifdef CONFIG_FDT_FIXUP_NOR_FLASH_SIZE - /* Update reg property in all nor flash nodes too */ - fdt_fixup_nor_flash_size(blob); -#endif - ft_adapt_flash_base(blob); -#endif - /* fix up the phy address */ - do_fixup_by_path(blob, eth_path, "reg", &phy_addr, sizeof(int), 0); - - return 0; -} -#endif /* CONFIG_OF_BOARD_SETUP */ diff --git a/board/intercontrol/digsy_mtc/eeprom.h b/board/intercontrol/digsy_mtc/eeprom.h deleted file mode 100644 index 17bd034072..0000000000 --- a/board/intercontrol/digsy_mtc/eeprom.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * (C) Copyright 2009 Semihalf. - * Written by: Grzegorz Bernacki gjb@semihalf.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#ifndef CMD_EEPROM_H -#define CMD_EEPROM_H - -#define EEPROM_ADDR CONFIG_SYS_I2C_EEPROM_ADDR -#define EEPROM_LEN 1024 /* eeprom length */ -#define EEPROM_IDENT 2408 /* identification word */ -#define EEPROM_ADDR_IDENT 0 /* identification word offset */ -#define EEPROM_ADDR_LEN_SYS 2 /* system area lenght offset */ -#define EEPROM_ADDR_LEN_SYSCFG 4 /* system config area length offset */ -#define EEPROM_ADDR_ETHADDR 23 /* ethernet address offset */ - -#endif diff --git a/board/intercontrol/digsy_mtc/is42s16800a-7t.h b/board/intercontrol/digsy_mtc/is42s16800a-7t.h deleted file mode 100644 index c555d2d623..0000000000 --- a/board/intercontrol/digsy_mtc/is42s16800a-7t.h +++ /dev/null @@ -1,11 +0,0 @@ -/* - * (C) Copyright 2004-2009 - * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#define SDRAM_MODE 0x00CD0000 -#define SDRAM_CONTROL 0x505F0000 -#define SDRAM_CONFIG1 0xD2322900 -#define SDRAM_CONFIG2 0x8AD70000 diff --git a/board/intercontrol/digsy_mtc/is45s16800a2.h b/board/intercontrol/digsy_mtc/is45s16800a2.h deleted file mode 100644 index c42ba38e34..0000000000 --- a/board/intercontrol/digsy_mtc/is45s16800a2.h +++ /dev/null @@ -1,15 +0,0 @@ -/* - * (C) Copyright 2010 - * Heiko Schocher, DENX Software Engineering, hs@denx.de. - * - * based on: - * (C) Copyright 2004-2009 - * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#define SDRAM_MODE 0x00CD0000 -#define SDRAM_CONTROL 0x50470000 -#define SDRAM_CONFIG1 0xD2322900 -#define SDRAM_CONFIG2 0x8AD70000 diff --git a/board/ipek01/Kconfig b/board/ipek01/Kconfig deleted file mode 100644 index 34e094d79d..0000000000 --- a/board/ipek01/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -if TARGET_IPEK01 - -config SYS_BOARD - default "ipek01" - -config SYS_CONFIG_NAME - default "ipek01" - -endif diff --git a/board/ipek01/MAINTAINERS b/board/ipek01/MAINTAINERS deleted file mode 100644 index 906d39ef80..0000000000 --- a/board/ipek01/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -IPEK01 BOARD -M: Anatolij Gustschin agust@denx.de -S: Maintained -F: board/ipek01/ -F: include/configs/ipek01.h -F: configs/ipek01_defconfig diff --git a/board/ipek01/Makefile b/board/ipek01/Makefile deleted file mode 100644 index a786ab2118..0000000000 --- a/board/ipek01/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2003-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := ipek01.o diff --git a/board/ipek01/ipek01.c b/board/ipek01/ipek01.c deleted file mode 100644 index 133db8c6bd..0000000000 --- a/board/ipek01/ipek01.c +++ /dev/null @@ -1,270 +0,0 @@ -/* - * (C) Copyright 2003-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * (C) Copyright 2004 - * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com. - * - * (C) Copyright 2006 - * MicroSys GmbH - * - * (C) Copyright 2009 - * Wolfgang Grandegger, DENX Software Engineering, wg@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <mpc5xxx.h> -#include <pci.h> -#include <netdev.h> -#include <miiphy.h> -#include <libfdt.h> -#include <mb862xx.h> -#include <video_fb.h> -#include <asm/processor.h> -#include <asm/io.h> - -#ifdef CONFIG_OF_LIBFDT -#include <fdt_support.h> -#endif /* CONFIG_OF_LIBFDT */ - -/* mt46v16m16-75 */ -#ifdef CONFIG_MPC5200_DDR -/* Settings for XLB = 132 MHz */ -#define SDRAM_MODE 0x018D0000 -#define SDRAM_EMODE 0x40090000 -#define SDRAM_CONTROL 0x714f0f00 -#define SDRAM_CONFIG1 0x73722930 -#define SDRAM_CONFIG2 0x47770000 -#define SDRAM_TAPDELAY 0x10000000 -#else -#error SDRAM is not supported on this board -#endif - -DECLARE_GLOBAL_DATA_PTR; - -static void sdram_start (int hi_addr) -{ - struct mpc5xxx_sdram *sdram = (struct mpc5xxx_sdram *)MPC5XXX_SDRAM; - long hi_addr_bit = hi_addr ? 0x01000000 : 0; - - /* unlock mode register */ - out_be32 (&sdram->ctrl, SDRAM_CONTROL | 0x80000000 | hi_addr_bit); - - /* precharge all banks */ - out_be32 (&sdram->ctrl, SDRAM_CONTROL | 0x80000002 | hi_addr_bit); - - /* set mode register: extended mode */ - out_be32 (&sdram->mode, SDRAM_EMODE); - - /* set mode register: reset DLL */ - out_be32 (&sdram->mode, SDRAM_MODE | 0x04000000); - - /* precharge all banks */ - out_be32 (&sdram->ctrl, SDRAM_CONTROL | 0x80000002 | hi_addr_bit); - - /* auto refresh */ - out_be32 (&sdram->ctrl, SDRAM_CONTROL | 0x80000004 | hi_addr_bit); - - /* set mode register */ - out_be32 (&sdram->mode, SDRAM_MODE); - - /* normal operation */ - out_be32 (&sdram->ctrl, SDRAM_CONTROL | hi_addr_bit); -} - -/* - * ATTENTION: Although partially referenced dram_init does NOT make real - * use of CONFIG_SYS_SDRAM_BASE. The code does not work if - * CONFIG_SYS_SDRAM_BASE is something else than 0x00000000. - */ - -int dram_init(void) -{ - struct mpc5xxx_mmap_ctl *mmap_ctl = - (struct mpc5xxx_mmap_ctl *)CONFIG_SYS_MBAR; - struct mpc5xxx_sdram *sdram = (struct mpc5xxx_sdram *)MPC5XXX_SDRAM; - struct mpc5xxx_cdm *cdm = (struct mpc5xxx_cdm *)MPC5XXX_CDM; - ulong dramsize = 0; - ulong dramsize2 = 0; - ulong test1, test2; - - /* setup SDRAM chip selects */ - out_be32 (&mmap_ctl->sdram0, 0x0000001e); /* 2G at 0x0 */ - out_be32 (&mmap_ctl->sdram1, 0x00000000); /* disabled */ - - /* setup config registers */ - out_be32 (&sdram->config1, SDRAM_CONFIG1); - out_be32 (&sdram->config2, SDRAM_CONFIG2); - - /* set tap delay */ - out_be32 (&cdm->porcfg, SDRAM_TAPDELAY); - - /* find RAM size using SDRAM CS0 only */ - sdram_start (0); - test1 = get_ram_size ((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000); - sdram_start (1); - test2 = get_ram_size ((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000); - if (test1 > test2) { - sdram_start (0); - dramsize = test1; - } else { - dramsize = test2; - } - - /* memory smaller than 1MB is impossible */ - if (dramsize < (1 << 20)) - dramsize = 0; - - /* set SDRAM CS0 size according to the amount of RAM found */ - if (dramsize > 0) - out_be32 (&mmap_ctl->sdram0, - 0x13 + __builtin_ffs (dramsize >> 20) - 1); - else - out_be32 (&mmap_ctl->sdram1, 0); /* disabled */ - - /* - * On MPC5200B we need to set the special configuration delay in the - * DDR controller. Please refer to Freescale's AN3221 "MPC5200B SDRAM - * Initialization and Configuration", 3.3.1 SDelay--MBAR + 0x0190: - * - * "The SDelay should be written to a value of 0x00000004. It is - * required to account for changes caused by normal wafer processing - * parameters." - */ - out_be32 (&sdram->sdelay, 0x04); - - gd->ram_size = dramsize + dramsize2; - - return 0; -} - -int checkboard (void) -{ - puts ("Board: IPEK01 \n"); - return 0; -} - -void flash_preinit (void) -{ - struct mpc5xxx_lpb *lpb = (struct mpc5xxx_lpb *)MPC5XXX_LPB; - - /* - * Now, when we are in RAM, enable flash write - * access for detection process. - * Note that CS_BOOT cannot be cleared when - * executing in flash. - */ - clrbits_be32 (&lpb->cs0_cfg, 0x1); /* clear RO */ -} - -void flash_afterinit (ulong start, ulong size) -{ - struct mpc5xxx_mmap_ctl *mmap_ctl = - (struct mpc5xxx_mmap_ctl *)CONFIG_SYS_MBAR; - -#if defined(CONFIG_BOOT_ROM) - /* adjust mapping */ - out_be32 (&mmap_ctl->cs1_start, START_REG (start)); - out_be32 (&mmap_ctl->cs1_stop, STOP_REG (start, size)); -#else - /* adjust mapping */ - out_be32 (&mmap_ctl->boot_start, START_REG (start)); - out_be32 (&mmap_ctl->cs0_start, START_REG (start)); - out_be32 (&mmap_ctl->boot_stop, STOP_REG (start, size)); - out_be32 (&mmap_ctl->cs0_stop, STOP_REG (start, size)); -#endif -} - -extern flash_info_t flash_info[]; /* info for FLASH chips */ - -int misc_init_r (void) -{ - /* adjust flash start */ - gd->bd->bi_flashstart = flash_info[0].start[0]; - return (0); -} - -#ifdef CONFIG_PCI -static struct pci_controller hose; - -extern void pci_mpc5xxx_init (struct pci_controller *); - -void pci_init_board (void) -{ - pci_mpc5xxx_init (&hose); -} -#endif - -#ifdef CONFIG_OF_BOARD_SETUP -int ft_board_setup(void *blob, bd_t *bd) -{ - ft_cpu_setup (blob, bd); - fdt_fixup_memory (blob, (u64) bd->bi_memstart, (u64) bd->bi_memsize); - - return 0; -} -#endif /* CONFIG_OF_BOARD_SETUP */ - -int board_eth_init(bd_t *bis) -{ - cpu_eth_init(bis); /* Built in FEC comes first */ - return pci_eth_init(bis); -} - -#ifdef CONFIG_VIDEO -extern GraphicDevice mb862xx; - -static const gdc_regs init_regs[] = { - {0x0100, 0x00000900}, - {0x0020, 0x80190257}, - {0x0024, 0x00000000}, - {0x0028, 0x00000000}, - {0x002c, 0x00000000}, - {0x0110, 0x00000000}, - {0x0114, 0x00000000}, - {0x0118, 0x02570320}, - {0x0004, 0x041f0000}, - {0x0008, 0x031f031f}, - {0x000c, 0x067f0347}, - {0x0010, 0x02780000}, - {0x0014, 0x0257025c}, - {0x0018, 0x00000000}, - {0x001c, 0x02570320}, - {0x0100, 0x80010900}, - {0x0, 0x0} -}; - -const gdc_regs *board_get_regs (void) -{ - return init_regs; -} - -/* Returns Lime base address */ -unsigned int board_video_init (void) -{ - if (mb862xx_probe (CONFIG_SYS_LIME_BASE) != MB862XX_TYPE_LIME) - return 0; - - mb862xx.winSizeX = 800; - mb862xx.winSizeY = 600; - mb862xx.gdfIndex = GDF_15BIT_555RGB; - mb862xx.gdfBytesPP = 2; - - return CONFIG_SYS_LIME_BASE; -} - -#if defined(CONFIG_CONSOLE_EXTRA_INFO) -/* - * Return text to be printed besides the logo. - */ -void video_get_info_str (int line_number, char *info) -{ - if (line_number == 1) - strcpy (info, " Board: IPEK01"); - else - info[0] = '\0'; -} -#endif -#endif /* CONFIG_VIDEO */ diff --git a/board/jupiter/Kconfig b/board/jupiter/Kconfig deleted file mode 100644 index d71acbbc4d..0000000000 --- a/board/jupiter/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -if TARGET_JUPITER - -config SYS_BOARD - default "jupiter" - -config SYS_CONFIG_NAME - default "jupiter" - -endif diff --git a/board/jupiter/MAINTAINERS b/board/jupiter/MAINTAINERS deleted file mode 100644 index 5a79a616cc..0000000000 --- a/board/jupiter/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -JUPITER BOARD -M: Heiko Schocher hs@denx.de -S: Maintained -F: board/jupiter/ -F: include/configs/jupiter.h -F: configs/jupiter_defconfig diff --git a/board/jupiter/Makefile b/board/jupiter/Makefile deleted file mode 100644 index 4d3ef9ed7a..0000000000 --- a/board/jupiter/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2003-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := jupiter.o diff --git a/board/jupiter/jupiter.c b/board/jupiter/jupiter.c deleted file mode 100644 index 52d2766e9a..0000000000 --- a/board/jupiter/jupiter.c +++ /dev/null @@ -1,296 +0,0 @@ -/* - * (C) Copyright 2007 - * Heiko Schocher, DENX Software Engineering, hs@denx.de. - * - * (C) Copyright 2004 - * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <mpc5xxx.h> -#include <pci.h> -#include <asm/processor.h> -#include <libfdt.h> - -#define SDRAM_DDR 0 -#if 1 -/* Settings Icecube */ -#define SDRAM_MODE 0x00CD0000 -#define SDRAM_CONTROL 0x504F0000 -#define SDRAM_CONFIG1 0xD2322800 -#define SDRAM_CONFIG2 0x8AD70000 -#else -/*Settings Jupiter UB 1.0.0 */ -#define SDRAM_MODE 0x008D0000 -#define SDRAM_CONTROL 0xD04F0000 -#define SDRAM_CONFIG1 0xf7277f00 -#define SDRAM_CONFIG2 0x88b70004 -#endif - -DECLARE_GLOBAL_DATA_PTR; - -#ifndef CONFIG_SYS_RAMBOOT -static void sdram_start (int hi_addr) -{ - long hi_addr_bit = hi_addr ? 0x01000000 : 0; - - /* unlock mode register */ - *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000000 | hi_addr_bit; - __asm__ volatile ("sync"); - - /* precharge all banks */ - *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit; - __asm__ volatile ("sync"); - -#if SDRAM_DDR - /* set mode register: extended mode */ - *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_EMODE; - __asm__ volatile ("sync"); - - /* set mode register: reset DLL */ - *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE | 0x04000000; - __asm__ volatile ("sync"); -#endif - - /* precharge all banks */ - *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit; - __asm__ volatile ("sync"); - - /* auto refresh */ - *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 | hi_addr_bit; - __asm__ volatile ("sync"); - - /* set mode register */ - *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE; - __asm__ volatile ("sync"); - - /* normal operation */ - *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit; - __asm__ volatile ("sync"); -} -#endif - -/* - * ATTENTION: Although partially referenced dram_init does NOT make real use - * use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE - * is something else than 0x00000000. - */ - -int dram_init(void) -{ - ulong dramsize = 0; - ulong dramsize2 = 0; - uint svr, pvr; - -#ifndef CONFIG_SYS_RAMBOOT - ulong test1, test2; - - /* setup SDRAM chip selects */ - *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001e;/* 2G at 0x0 */ - *(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x80000000;/* disabled */ - __asm__ volatile ("sync"); - - /* setup config registers */ - *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1; - *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2; - __asm__ volatile ("sync"); - -#if SDRAM_DDR - /* set tap delay */ - *(vu_long *)MPC5XXX_CDM_PORCFG = SDRAM_TAPDELAY; - __asm__ volatile ("sync"); -#endif - - /* find RAM size using SDRAM CS0 only */ - sdram_start(0); - test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000); - sdram_start(1); - test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000); - if (test1 > test2) { - sdram_start(0); - dramsize = test1; - } else { - dramsize = test2; - } - - /* memory smaller than 1MB is impossible */ - if (dramsize < (1 << 20)) { - dramsize = 0; - } - - /* set SDRAM CS0 size according to the amount of RAM found */ - if (dramsize > 0) { - *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 + __builtin_ffs(dramsize >> 20) - 1; - } else { - *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */ - } - - /* let SDRAM CS1 start right after CS0 */ - *(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize + 0x0000001e;/* 2G */ - - /* find RAM size using SDRAM CS1 only */ - if (!dramsize) - sdram_start(0); - test2 = test1 = get_ram_size((long *)(CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000); - if (!dramsize) { - sdram_start(1); - test2 = get_ram_size((long *)(CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000); - } - if (test1 > test2) { - sdram_start(0); - dramsize2 = test1; - } else { - dramsize2 = test2; - } - - /* memory smaller than 1MB is impossible */ - if (dramsize2 < (1 << 20)) { - dramsize2 = 0; - } - - /* set SDRAM CS1 size according to the amount of RAM found */ - if (dramsize2 > 0) { - *(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize - | (0x13 + __builtin_ffs(dramsize2 >> 20) - 1); - } else { - *(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */ - } - -#else /* CONFIG_SYS_RAMBOOT */ - - /* retrieve size of memory connected to SDRAM CS0 */ - dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF; - if (dramsize >= 0x13) { - dramsize = (1 << (dramsize - 0x13)) << 20; - } else { - dramsize = 0; - } - - /* retrieve size of memory connected to SDRAM CS1 */ - dramsize2 = *(vu_long *)MPC5XXX_SDRAM_CS1CFG & 0xFF; - if (dramsize2 >= 0x13) { - dramsize2 = (1 << (dramsize2 - 0x13)) << 20; - } else { - dramsize2 = 0; - } - -#endif /* CONFIG_SYS_RAMBOOT */ - - /* - * On MPC5200B we need to set the special configuration delay in the - * DDR controller. Please refer to Freescale's AN3221 "MPC5200B SDRAM - * Initialization and Configuration", 3.3.1 SDelay--MBAR + 0x0190: - * - * "The SDelay should be written to a value of 0x00000004. It is - * required to account for changes caused by normal wafer processing - * parameters." - */ - svr = get_svr(); - pvr = get_pvr(); - if ((SVR_MJREV(svr) >= 2) && - (PVR_MAJ(pvr) == 1) && (PVR_MIN(pvr) == 4)) { - - *(vu_long *)MPC5XXX_SDRAM_SDELAY = 0x04; - __asm__ volatile ("sync"); - } - - gd->ram_size = dramsize + dramsize2; - - return 0; -} - -int checkboard (void) -{ - puts ("Board: Sauter (Jupiter)\n"); - return 0; -} - -void flash_preinit(void) -{ - /* - * Now, when we are in RAM, enable flash write - * access for detection process. - * Note that CS_BOOT cannot be cleared when - * executing in flash. - */ - *(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */ -} - -int board_early_init_r (void) -{ - flash_preinit (); - return 0; -} - -void flash_afterinit(ulong size) -{ - if (size == 0x1000000) { /* adjust mapping */ - *(vu_long *)MPC5XXX_BOOTCS_START = *(vu_long *)MPC5XXX_CS0_START = - START_REG(CONFIG_SYS_BOOTCS_START | size); - *(vu_long *)MPC5XXX_BOOTCS_STOP = *(vu_long *)MPC5XXX_CS0_STOP = - STOP_REG(CONFIG_SYS_BOOTCS_START | size, size); - } - *(vu_long *)MPC5XXX_ADDECR &= ~(1 << 25); /* disable CS_BOOT */ - *(vu_long *)MPC5XXX_ADDECR |= (1 << 16); /* enable CS0 */ -} - -int update_flash_size (int flash_size) -{ - flash_afterinit (flash_size); - return 0; -} - -int board_early_init_f (void) -{ - *(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */ - return 0; -} - -#ifdef CONFIG_PCI -static struct pci_controller hose; - -extern void pci_mpc5xxx_init(struct pci_controller *); - -void pci_init_board(void) -{ - pci_mpc5xxx_init(&hose); -} -#endif - -#if defined(CONFIG_IDE) && defined(CONFIG_IDE_RESET) - -void init_ide_reset (void) -{ - debug ("init_ide_reset\n"); - - /* Configure PSC1_4 as GPIO output for ATA reset */ - *(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC1_4; - *(vu_long *) MPC5XXX_WU_GPIO_DIR |= GPIO_PSC1_4; - /* Deassert reset */ - *(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_PSC1_4; -} - -void ide_set_reset (int idereset) -{ - debug ("ide_reset(%d)\n", idereset); - - if (idereset) { - *(vu_long *) MPC5XXX_WU_GPIO_DATA_O &= ~GPIO_PSC1_4; - /* Make a delay. MPC5200 spec says 25 usec min */ - udelay(500000); - } else { - *(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_PSC1_4; - } -} -#endif - -#ifdef CONFIG_OF_BOARD_SETUP -int ft_board_setup(void *blob, bd_t *bd) -{ - ft_cpu_setup(blob, bd); - - return 0; -} -#endif /* CONFIG_OF_BOARD_SETUP */ diff --git a/board/motionpro/Kconfig b/board/motionpro/Kconfig deleted file mode 100644 index f624f6c95f..0000000000 --- a/board/motionpro/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -if TARGET_MOTIONPRO - -config SYS_BOARD - default "motionpro" - -config SYS_CONFIG_NAME - default "motionpro" - -endif diff --git a/board/motionpro/MAINTAINERS b/board/motionpro/MAINTAINERS deleted file mode 100644 index 2f8b5cb580..0000000000 --- a/board/motionpro/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -MOTIONPRO BOARD -#M: - -S: Maintained -F: board/motionpro/ -F: include/configs/motionpro.h -F: configs/motionpro_defconfig diff --git a/board/motionpro/Makefile b/board/motionpro/Makefile deleted file mode 100644 index 898a384c39..0000000000 --- a/board/motionpro/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2003-2007 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := motionpro.o diff --git a/board/motionpro/motionpro.c b/board/motionpro/motionpro.c deleted file mode 100644 index 7883a179e8..0000000000 --- a/board/motionpro/motionpro.c +++ /dev/null @@ -1,243 +0,0 @@ -/* - * (C) Copyright 2003-2007 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * modified for Promess PRO - by Andy Joseph, andy@promessdev.com - * modified for Promess PRO-Motion - by Robert McCullough, rob@promessdev.com - * modified by Chris M. Tumas 6/20/06 Change CAS latency to 2 from 3 - * Also changed the refresh for 100MHz operation - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <mpc5xxx.h> -#include <miiphy.h> -#include <libfdt.h> - -#if defined(CONFIG_LED_STATUS) -#include <status_led.h> -#endif /* CONFIG_LED_STATUS */ - -DECLARE_GLOBAL_DATA_PTR; - -/* Kollmorgen DPR initialization data */ -struct init_elem { - unsigned long addr; - unsigned len; - char *data; - } init_seq[] = { - {0x500003F2, 2, "\x86\x00"}, /* HW parameter */ - {0x500003F0, 2, "\x00\x00"}, - {0x500003EC, 4, "\x00\x80\xc1\x52"}, /* Magic word */ - }; - -/* - * Initialize Kollmorgen DPR - */ -static void kollmorgen_init(void) -{ - unsigned i, j; - vu_char *p; - - for (i = 0; i < sizeof(init_seq) / sizeof(struct init_elem); ++i) { - p = (vu_char *)init_seq[i].addr; - for (j = 0; j < init_seq[i].len; ++j) - *(p + j) = *(init_seq[i].data + j); - } - - printf("DPR: Kollmorgen DPR initialized\n"); -} - - -/* - * Early board initalization. - */ -int board_early_init_r(void) -{ - /* Now, when we are in RAM, disable Boot Chipselect and enable CS0 */ - *(vu_long *)MPC5XXX_ADDECR &= ~(1 << 25); - *(vu_long *)MPC5XXX_ADDECR |= (1 << 16); - - /* Initialize Kollmorgen DPR */ - kollmorgen_init(); - - return 0; -} - - -/* - * Additional PHY intialization. After being reset in mpc5xxx_fec_init_phy(), - * PHY goes into FX mode. To take it out of the FX mode and switch into - * desired TX operation, one needs to clear the FX_SEL bit of Mode Control - * Register. - */ -void reset_phy(void) -{ - unsigned short mode_control; - - miiphy_read("FEC", CONFIG_PHY_ADDR, 0x15, &mode_control); - miiphy_write("FEC", CONFIG_PHY_ADDR, 0x15, - mode_control & 0xfffe); - return; -} - -#ifndef CONFIG_SYS_RAMBOOT -/* - * Helper function to initialize SDRAM controller. - */ -static void sdram_start(int hi_addr) -{ - long hi_addr_bit = hi_addr ? 0x01000000 : 0; - - /* unlock mode register */ - *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000000 | - hi_addr_bit; - - /* precharge all banks */ - *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | - hi_addr_bit; - - /* auto refresh */ - *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 | - hi_addr_bit; - - /* auto refresh, second time */ - *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 | - hi_addr_bit; - - /* set mode register */ - *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE; - - /* normal operation */ - *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit; -} -#endif /* !CONFIG_SYS_RAMBOOT */ - - -/* - * Initalize SDRAM - configure SDRAM controller, detect memory size. - */ -int dram_init(void) -{ - ulong dramsize = 0; -#ifndef CONFIG_SYS_RAMBOOT - ulong test1, test2; - - /* According to AN3221 (MPC5200B SDRAM Initialization and - * Configuration), the SDelay register must be written a value of - * 0x00000004 as the first step of the SDRAM contorller configuration. - */ - *(vu_long *)MPC5XXX_SDRAM_SDELAY = 0x04; - - /* configure SDRAM start/end for detection */ - *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001e; /* 2G at 0x0 */ - *(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x80000000; /* disabled */ - - /* setup config registers */ - *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1; - *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2; - - sdram_start(0); - test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000); - sdram_start(1); - test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000); - if (test1 > test2) { - sdram_start(0); - dramsize = test1; - } else { - dramsize = test2; - } - - /* memory smaller than 1MB is impossible */ - if (dramsize < (1 << 20)) - dramsize = 0; - - /* set SDRAM CS0 size according to the amount of RAM found */ - if (dramsize > 0) { - *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 + - __builtin_ffs(dramsize >> 20) - 1; - } else { - *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */ - } - - /* let SDRAM CS1 start right after CS0 and disable it */ - *(vu_long *) MPC5XXX_SDRAM_CS1CFG = dramsize; - -#else /* !CONFIG_SYS_RAMBOOT */ - /* retrieve size of memory connected to SDRAM CS0 */ - dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF; - if (dramsize >= 0x13) - dramsize = (1 << (dramsize - 0x13)) << 20; - else - dramsize = 0; -#endif /* CONFIG_SYS_RAMBOOT */ - - /* return total ram size */ - gd->ram_size = dramsize; - - return 0; -} - - -int checkboard(void) -{ - uchar rev = *(vu_char *)CPLD_REV_REGISTER; - printf("Board: Promess Motion-PRO board (CPLD rev. 0x%02x)\n", rev); - return 0; -} - - -#ifdef CONFIG_OF_BOARD_SETUP -int ft_board_setup(void *blob, bd_t *bd) -{ - ft_cpu_setup(blob, bd); - - return 0; -} -#endif /* CONFIG_OF_BOARD_SETUP */ - - -#if defined(CONFIG_LED_STATUS) -vu_long *regcode_to_regaddr(led_id_t regcode) -{ - /* GPT Enable and Mode Select Register address */ - vu_long *reg_translate[] = { - (vu_long *)MPC5XXX_GPT6_ENABLE, - (vu_long *)MPC5XXX_GPT7_ENABLE, - }; - - if (ARRAY_SIZE(reg_translate) <= regcode) - return NULL; - return reg_translate[regcode]; -} - -void __led_init(led_id_t regcode, int state) -{ - vu_long *regaddr = regcode_to_regaddr(regcode); - - *regaddr |= ENABLE_GPIO_OUT; - - if (state == CONFIG_LED_STATUS_ON) - *((vu_long *) regaddr) |= LED_ON; - else - *((vu_long *) regaddr) &= ~LED_ON; -} - -void __led_set(led_id_t regcode, int state) -{ - vu_long *regaddr = regcode_to_regaddr(regcode); - - if (state == CONFIG_LED_STATUS_ON) - *regaddr |= LED_ON; - else - *regaddr &= ~LED_ON; -} - -void __led_toggle(led_id_t regcode) -{ - vu_long *regaddr = regcode_to_regaddr(regcode); - - *regaddr ^= LED_ON; -} -#endif /* CONFIG_LED_STATUS */ diff --git a/board/munices/Kconfig b/board/munices/Kconfig deleted file mode 100644 index 019aaae3e9..0000000000 --- a/board/munices/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -if TARGET_MUNICES - -config SYS_BOARD - default "munices" - -config SYS_CONFIG_NAME - default "munices" - -endif diff --git a/board/munices/MAINTAINERS b/board/munices/MAINTAINERS deleted file mode 100644 index 50d3e7ebda..0000000000 --- a/board/munices/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -MUNICES BOARD -#M: - -S: Maintained -F: board/munices/ -F: include/configs/munices.h -F: configs/munices_defconfig diff --git a/board/munices/Makefile b/board/munices/Makefile deleted file mode 100644 index d16e2a1fa2..0000000000 --- a/board/munices/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2003-2008 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := munices.o diff --git a/board/munices/mt48lc16m16a2-75.h b/board/munices/mt48lc16m16a2-75.h deleted file mode 100644 index 0133eaa2ca..0000000000 --- a/board/munices/mt48lc16m16a2-75.h +++ /dev/null @@ -1,14 +0,0 @@ -/* - * (C) Copyright 2004 - * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#define SDRAM_DDR 0 /* is SDR */ - -/* Settings for XLB = 132 MHz */ -#define SDRAM_MODE 0x00CD0000 -#define SDRAM_CONTROL 0x504F0000 -#define SDRAM_CONFIG1 0xD2322800 -#define SDRAM_CONFIG2 0x8AD70000 diff --git a/board/munices/munices.c b/board/munices/munices.c deleted file mode 100644 index 468eb3723e..0000000000 --- a/board/munices/munices.c +++ /dev/null @@ -1,159 +0,0 @@ -/* - * (C) Copyright 2007 - * Heiko Schocher, DENX Software Engineering, hs@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <mpc5xxx.h> -#include <pci.h> - -#include "mt48lc16m16a2-75.h" - -DECLARE_GLOBAL_DATA_PTR; - -#ifndef CONFIG_SYS_RAMBOOT -static void sdram_start (int hi_addr) -{ - long hi_addr_bit = hi_addr ? 0x01000000 : 0; - - /* unlock mode register */ - *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000000 | hi_addr_bit; - __asm__ volatile ("sync"); - - /* precharge all banks */ - *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit; - __asm__ volatile ("sync"); - -#if SDRAM_DDR - /* set mode register: extended mode */ - *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_EMODE; - __asm__ volatile ("sync"); - - /* set mode register: reset DLL */ - *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE | 0x04000000; - __asm__ volatile ("sync"); -#endif - - /* precharge all banks */ - *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit; - __asm__ volatile ("sync"); - - /* auto refresh */ - *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 | hi_addr_bit; - __asm__ volatile ("sync"); - - /* set mode register */ - *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE; - __asm__ volatile ("sync"); - - /* normal operation */ - *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit; - __asm__ volatile ("sync"); -} -#endif - -/* - * ATTENTION: Although partially referenced dram_init does NOT make real use - * use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE - * is something else than 0x00000000. - */ - -int dram_init(void) -{ - ulong dramsize = 0; - ulong dramsize2 = 0; -#ifndef CONFIG_SYS_RAMBOOT - ulong test1, test2; - - /* setup SDRAM chip selects */ - *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001b;/* 256MB at 0x0 */ - *(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x10000000;/* disabled */ - __asm__ volatile ("sync"); - - /* setup config registers */ - *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1; - *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2; - __asm__ volatile ("sync"); - -#if SDRAM_DDR && SDRAM_TAPDELAY - /* set tap delay */ - *(vu_long *)MPC5XXX_CDM_PORCFG = SDRAM_TAPDELAY; - __asm__ volatile ("sync"); -#endif - - /* find RAM size using SDRAM CS0 only */ - sdram_start(0); - test1 = (ulong )get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x10000000); - sdram_start(1); - test2 = (ulong )get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x10000000); - if (test1 > test2) { - sdram_start(0); - dramsize = test1; - } else { - dramsize = test2; - } - - /* memory smaller than 1MB is impossible */ - if (dramsize < (1 << 20)) { - dramsize = 0; - } - - /* set SDRAM CS0 size according to the amount of RAM found */ - if (dramsize > 0) { - *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 + __builtin_ffs(dramsize >> 20) - 1; - } else { - *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */ - } - -#else /* CONFIG_SYS_RAMBOOT */ - - /* retrieve size of memory connected to SDRAM CS0 */ - dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF; - if (dramsize >= 0x13) { - dramsize = (1 << (dramsize - 0x13)) << 20; - } else { - dramsize = 0; - } - - /* retrieve size of memory connected to SDRAM CS1 */ - dramsize2 = *(vu_long *)MPC5XXX_SDRAM_CS1CFG & 0xFF; - if (dramsize2 >= 0x13) { - dramsize2 = (1 << (dramsize2 - 0x13)) << 20; - } else { - dramsize2 = 0; - } - -#endif /* CONFIG_SYS_RAMBOOT */ - - gd->ram_size = dramsize + dramsize2; - - return 0; -} - -int checkboard (void) -{ - puts ("Board: MUNICes\n"); - return 0; -} - -#ifdef CONFIG_PCI -static struct pci_controller hose; - -extern void pci_mpc5xxx_init(struct pci_controller *); - -void pci_init_board(void) -{ - pci_mpc5xxx_init(&hose); -} -#endif - -#ifdef CONFIG_OF_BOARD_SETUP -int ft_board_setup(void *blob, bd_t *bd) -{ - ft_cpu_setup(blob, bd); - - return 0; -} -#endif /* CONFIG_OF_BOARD_SETUP */ diff --git a/board/pdm360ng/Kconfig b/board/pdm360ng/Kconfig deleted file mode 100644 index 33173a0a2a..0000000000 --- a/board/pdm360ng/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -if TARGET_PDM360NG - -config SYS_BOARD - default "pdm360ng" - -config SYS_CONFIG_NAME - default "pdm360ng" - -endif diff --git a/board/pdm360ng/MAINTAINERS b/board/pdm360ng/MAINTAINERS deleted file mode 100644 index 5c99f59e8f..0000000000 --- a/board/pdm360ng/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -PDM360NG BOARD -M: Michael Weiss michael.weiss@ifm.com -S: Maintained -F: board/pdm360ng/ -F: include/configs/pdm360ng.h -F: configs/pdm360ng_defconfig diff --git a/board/pdm360ng/Makefile b/board/pdm360ng/Makefile deleted file mode 100644 index 99201a41f6..0000000000 --- a/board/pdm360ng/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2007 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := pdm360ng.o diff --git a/board/pdm360ng/pdm360ng.c b/board/pdm360ng/pdm360ng.c deleted file mode 100644 index 371bcd9e6b..0000000000 --- a/board/pdm360ng/pdm360ng.c +++ /dev/null @@ -1,581 +0,0 @@ -/* - * (C) Copyright 2009, 2010 Wolfgang Denk wd@denx.de - * - * (C) Copyright 2009-2010 - * Michael Weiß, ifm ecomatic gmbh, michael.weiss@ifm.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <asm/bitops.h> -#include <command.h> -#include <asm/io.h> -#include <asm/processor.h> -#include <asm/mpc512x.h> -#include <fdt_support.h> -#include <flash.h> -#ifdef CONFIG_MISC_INIT_R -#include <i2c.h> -#endif -#include <serial.h> -#include <jffs2/load_kernel.h> -#include <mtd_node.h> - -DECLARE_GLOBAL_DATA_PTR; - -extern flash_info_t flash_info[]; -ulong flash_get_size (phys_addr_t base, int banknum); - -sdram_conf_t mddrc_config[] = { - { - (512 << 20), /* 512 MB RAM configuration */ - { - CONFIG_SYS_MDDRC_SYS_CFG, - CONFIG_SYS_MDDRC_TIME_CFG0, - CONFIG_SYS_MDDRC_TIME_CFG1, - CONFIG_SYS_MDDRC_TIME_CFG2 - } - }, - { - (128 << 20), /* 128 MB RAM configuration */ - { - CONFIG_SYS_MDDRC_SYS_CFG_ALT1, - CONFIG_SYS_MDDRC_TIME_CFG0_ALT1, - CONFIG_SYS_MDDRC_TIME_CFG1_ALT1, - CONFIG_SYS_MDDRC_TIME_CFG2_ALT1 - } - }, -}; - -int dram_init(void) -{ - int i; - u32 msize = 0; - u32 pdm360ng_init_seq[] = { - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_PCHG_ALL, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_RFSH, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_RFSH, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_MICRON_INIT_DEV_OP, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_EM2, - CONFIG_SYS_DDRCMD_NOP, - CONFIG_SYS_DDRCMD_PCHG_ALL, - CONFIG_SYS_DDRCMD_EM2, - CONFIG_SYS_DDRCMD_EM3, - CONFIG_SYS_DDRCMD_EN_DLL, - CONFIG_SYS_DDRCMD_RES_DLL, - CONFIG_SYS_DDRCMD_PCHG_ALL, - CONFIG_SYS_DDRCMD_RFSH, - CONFIG_SYS_DDRCMD_RFSH, - CONFIG_SYS_MICRON_INIT_DEV_OP, - CONFIG_SYS_DDRCMD_OCD_DEFAULT, - CONFIG_SYS_DDRCMD_OCD_EXIT, - CONFIG_SYS_DDRCMD_PCHG_ALL, - CONFIG_SYS_DDRCMD_NOP - }; - - for (i = 0; i < ARRAY_SIZE(mddrc_config); i++) { - msize = fixed_sdram(&mddrc_config[i].cfg, pdm360ng_init_seq, - ARRAY_SIZE(pdm360ng_init_seq)); - if (msize == mddrc_config[i].size) - break; - } - - gd->ram_size = msize; - - return 0; -} - -static int set_lcd_brightness(char *); - -int misc_init_r(void) -{ - volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; - - /* - * Re-configure flash setup using auto-detected info - */ - if (flash_info[1].size > 0) { - out_be32(&im->sysconf.lpcs1aw, - CSAW_START(gd->bd->bi_flashstart + flash_info[1].size) | - CSAW_STOP(gd->bd->bi_flashstart + flash_info[1].size, - flash_info[1].size)); - sync_law(&im->sysconf.lpcs1aw); - /* - * Re-check to get correct base address - */ - flash_get_size (gd->bd->bi_flashstart + flash_info[1].size, 1); - } else { - /* Disable Bank 1 */ - out_be32(&im->sysconf.lpcs1aw, 0x01000100); - sync_law(&im->sysconf.lpcs1aw); - } - - out_be32(&im->sysconf.lpcs0aw, - CSAW_START(gd->bd->bi_flashstart) | - CSAW_STOP(gd->bd->bi_flashstart, flash_info[0].size)); - sync_law(&im->sysconf.lpcs0aw); - - /* - * Re-check to get correct base address - */ - flash_get_size (gd->bd->bi_flashstart, 0); - - /* - * Re-do flash protection upon new addresses - */ - flash_protect (FLAG_PROTECT_CLEAR, - gd->bd->bi_flashstart, 0xffffffff, - &flash_info[0]); - - /* Monitor protection ON by default */ - flash_protect (FLAG_PROTECT_SET, - CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN - 1, - &flash_info[0]); - - /* Environment protection ON by default */ - flash_protect (FLAG_PROTECT_SET, - CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1, - &flash_info[0]); - -#ifdef CONFIG_ENV_ADDR_REDUND - /* Redundant environment protection ON by default */ - flash_protect (FLAG_PROTECT_SET, - CONFIG_ENV_ADDR_REDUND, - CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1, - &flash_info[0]); -#endif - -#ifdef CONFIG_FSL_DIU_FB - set_lcd_brightness(0); - /* Switch LCD-Backlight and LVDS-Interface on */ - setbits_be32(&im->gpio.gpdir, 0x01040000); - clrsetbits_be32(&im->gpio.gpdat, 0x01000000, 0x00040000); -#endif - - return 0; -} - -static iopin_t ioregs_init[] = { - /* FUNC1=LPC_CS4 */ - { - offsetof(struct ioctrl512x, io_control_pata_ce1), 1, 0, - IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(1) | - IO_PIN_PUE(1) | IO_PIN_ST(0) | IO_PIN_DS(3) - }, - /* FUNC3=GPIO10 */ - { - offsetof(struct ioctrl512x, io_control_pata_ce2), 1, 0, - IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | - IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(0) - }, - /* FUNC1=CAN3_TX */ - { - offsetof(struct ioctrl512x, io_control_pata_isolate), 1, 0, - IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | - IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(0) - }, - /* FUNC3=GPIO14 */ - { - offsetof(struct ioctrl512x, io_control_pata_iochrdy), 1, 0, - IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | - IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(0) - }, - /* FUNC2=DIU_LD22 Sets Next 2 to DIU_LD pads */ - /* DIU_LD22-DIU_LD23 */ - { - offsetof(struct ioctrl512x, io_control_pci_ad31), 2, 0, - IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | - IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(1) - }, - /* FUNC2=USB1_DATA7 Sets Next 12 to USB1 pads */ - /* USB1_DATA7-USB1_DATA0, USB1_STOP, USB1_NEXT, USB1_CLK, USB1_DIR */ - { - offsetof(struct ioctrl512x, io_control_pci_ad29), 12, 0, - IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | - IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(1) - }, - /* FUNC1=VIU_DATA0 Sets Next 3 to VIU_DATA pads */ - /* VIU_DATA0-VIU_DATA2 */ - { - offsetof(struct ioctrl512x, io_control_pci_ad17), 3, 0, - IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | - IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(1) - }, - /* FUNC2=FEC_TXD_0 */ - { - offsetof(struct ioctrl512x, io_control_pci_ad14), 1, 0, - IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | - IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(1) - }, - /* FUNC1=VIU_DATA3 Sets Next 2 to VIU_DATA pads */ - /* VIU_DATA3, VIU_DATA4 */ - { - offsetof(struct ioctrl512x, io_control_pci_ad13), 2, 0, - IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | - IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(1) - }, - /* FUNC2=FEC_RXD_1 Sets Next 12 to FEC pads */ - /* FEC_RXD_1, FEC_RXD_0, FEC_RX_CLK, FEC_TX_CLK, FEC_RX_ER, FEC_RX_DV */ - /* FEC_TX_EN, FEC_TX_ER, FEC_CRS, FEC_MDC, FEC_MDIO, FEC_COL */ - { - offsetof(struct ioctrl512x, io_control_pci_ad11), 12, 0, - IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | - IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(1) - }, - /* FUNC2=DIU_LD03 Sets Next 25 to DIU pads */ - /* DIU_LD00-DIU_LD21 */ - { - offsetof(struct ioctrl512x, io_control_pci_cbe0), 22, 0, - IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | - IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(1) - }, - /* FUNC2=DIU_CLK Sets Next 3 to DIU pads */ - /* DIU_CLK, DIU_VSYNC, DIU_HSYNC */ - { - offsetof(struct ioctrl512x, io_control_spdif_txclk), 3, 0, - IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | - IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3) - }, - /* FUNC2=CAN3_RX */ - { - offsetof(struct ioctrl512x, io_control_irq1), 1, 0, - IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | - IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(0) - }, - /* Sets lowest slew on 2 CAN_TX Pins*/ - { - offsetof(struct ioctrl512x, io_control_can1_tx), 2, 0, - IO_PIN_FMUX(0) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | - IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(0) - }, - /* FUNC3=CAN4_TX Sets Next 2 to CAN4 pads */ - /* CAN4_TX, CAN4_RX */ - { - offsetof(struct ioctrl512x, io_control_j1850_tx), 2, 0, - IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | - IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(0) - }, - /* FUNC3=GPIO8 Sets Next 2 to GPIO pads */ - /* GPIO8, GPIO9 */ - { - offsetof(struct ioctrl512x, io_control_psc0_0), 2, 0, - IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | - IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(0) - }, - /* FUNC1=FEC_TXD_1 Sets Next 3 to FEC pads */ - /* FEC_TXD_1, FEC_TXD_2, FEC_TXD_3 */ - { - offsetof(struct ioctrl512x, io_control_psc0_4), 3, 0, - IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | - IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3) - }, - /* FUNC1=FEC_RXD_3 Sets Next 2 to FEC pads */ - /* FEC_RXD_3, FEC_RXD_2 */ - { - offsetof(struct ioctrl512x, io_control_psc1_4), 2, 0, - IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | - IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3) - }, - /* FUNC3=GPIO17 */ - { - offsetof(struct ioctrl512x, io_control_psc2_1), 1, 0, - IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | - IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(0) - }, - /* FUNC3=GPIO2/GPT2 Sets Next 3 to GPIO pads */ - /* GPIO2, GPIO20, GPIO21 */ - { - offsetof(struct ioctrl512x, io_control_psc2_4), 3, 0, - IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | - IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(0) - }, - /* FUNC2=VIU_PIX_CLK */ - { - offsetof(struct ioctrl512x, io_control_psc3_4), 1, 0, - IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | - IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3) - }, - /* FUNC3=GPIO24 Sets Next 2 to GPIO pads */ - /* GPIO24, GPIO25 */ - { - offsetof(struct ioctrl512x, io_control_psc4_0), 2, 0, - IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | - IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(0) - }, - /* FUNC1=NFC_CE2 */ - { - offsetof(struct ioctrl512x, io_control_psc4_4), 1, 0, - IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(1) | - IO_PIN_PUE(1) | IO_PIN_ST(0) | IO_PIN_DS(0) - }, - /* FUNC2=VIU_DATA5 Sets Next 5 to VIU_DATA pads */ - /* VIU_DATA5-VIU_DATA9 */ - { - offsetof(struct ioctrl512x, io_control_psc5_0), 5, 0, - IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | - IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3) - }, - /* FUNC1=LPC_TSIZ1 Sets Next 2 to LPC_TSIZ pads */ - /* LPC_TSIZ1-LPC_TSIZ2 */ - { - offsetof(struct ioctrl512x, io_control_psc6_0), 2, 0, - IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | - IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3) - }, - /* FUNC1=LPC_TS */ - { - offsetof(struct ioctrl512x, io_control_psc6_4), 1, 0, - IO_PIN_FMUX(1) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | - IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3) - }, - /* FUNC3=GPIO16 */ - { - offsetof(struct ioctrl512x, io_control_psc7_0), 1, 0, - IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | - IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(0) - }, - /* FUNC3=GPIO18 Sets Next 3 to GPIO pads */ - /* GPIO18-GPIO19, GPT7/GPIO7 */ - { - offsetof(struct ioctrl512x, io_control_psc7_2), 3, 0, - IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | - IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(0) - }, - /* FUNC3=GPIO0/GPT0 */ - { - offsetof(struct ioctrl512x, io_control_psc8_4), 1, 0, - IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | - IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(0) - }, - /* FUNC3=GPIO11 Sets Next 4 to GPIO pads */ - /* GPIO11, GPIO2, GPIO12, GPIO13 */ - { - offsetof(struct ioctrl512x, io_control_psc10_3), 4, 0, - IO_PIN_FMUX(3) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | - IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(0) - }, - /* FUNC2=DIU_DE */ - { - offsetof(struct ioctrl512x, io_control_psc11_4), 1, 0, - IO_PIN_FMUX(2) | IO_PIN_HOLD(0) | IO_PIN_PUD(0) | - IO_PIN_PUE(0) | IO_PIN_ST(0) | IO_PIN_DS(3) - } -}; - -int checkboard (void) -{ - volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR; - - puts("Board: PDM360NG\n"); - - /* initialize function mux & slew rate IO inter alia on IO Pins */ - - iopin_initialize(ioregs_init, ARRAY_SIZE(ioregs_init)); - - /* initialize IO_CONTROL_GP (GPIO/GPT-mux-register) */ - setbits_be32(&im->io_ctrl.io_control_gp, - (1 << 0) | /* GP_MUX7->GPIO7 */ - (1 << 5)); /* GP_MUX2->GPIO2 */ - - /* configure GPIO24 (VIU_CE), output/high */ - setbits_be32(&im->gpio.gpdir, 0x80); - setbits_be32(&im->gpio.gpdat, 0x80); - - return 0; -} - -#ifdef CONFIG_OF_BOARD_SETUP -#ifdef CONFIG_FDT_FIXUP_PARTITIONS -struct node_info nodes[] = { - { "fsl,mpc5121-nfc", MTD_DEV_TYPE_NAND, }, - { "cfi-flash", MTD_DEV_TYPE_NOR, }, -}; -#endif - -#if defined(CONFIG_VIDEO) -/* - * EDID block has been generated using Phoenix EDID Designer 1.3. - * This tool creates a text file containing: - * - * EDID BYTES: - * 0x 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F - * ------------------------------------------------ - * 00 | 00 FF FF FF FF FF FF 00 42 C9 34 12 01 00 00 00 - * 10 | 0A 0C 01 03 80 98 5B 78 CA 7E 50 A0 58 4E 96 25 - * 20 | 1E 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01 - * 30 | 01 01 01 01 01 01 80 0C 20 00 31 E0 2D 10 2A 80 - * 40 | 12 08 30 E4 10 00 00 18 00 00 00 FD 00 38 3C 1F - * 50 | 3C 04 0A 20 20 20 20 20 20 20 00 00 00 FF 00 50 - * 60 | 4D 30 37 30 57 4C 33 0A 0A 0A 0A 0A 00 00 00 FF - * 70 | 00 41 30 30 30 30 30 30 30 30 30 30 30 31 00 D4 - * - * Then this data has been manually converted to the char - * array below. - */ -static unsigned char edid_buf[128] = { - 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, - 0x42, 0xC9, 0x34, 0x12, 0x01, 0x00, 0x00, 0x00, - 0x0A, 0x0C, 0x01, 0x03, 0x80, 0x98, 0x5B, 0x78, - 0xCA, 0x7E, 0x50, 0xA0, 0x58, 0x4E, 0x96, 0x25, - 0x1E, 0x50, 0x54, 0x00, 0x00, 0x00, 0x01, 0x01, - 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, - 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x80, 0x0C, - 0x20, 0x00, 0x31, 0xE0, 0x2D, 0x10, 0x2A, 0x80, - 0x12, 0x08, 0x30, 0xE4, 0x10, 0x00, 0x00, 0x18, - 0x00, 0x00, 0x00, 0xFD, 0x00, 0x38, 0x3C, 0x1F, - 0x3C, 0x04, 0x0A, 0x20, 0x20, 0x20, 0x20, 0x20, - 0x20, 0x20, 0x00, 0x00, 0x00, 0xFF, 0x00, 0x50, - 0x4D, 0x30, 0x37, 0x30, 0x57, 0x4C, 0x33, 0x0A, - 0x0A, 0x0A, 0x0A, 0x0A, 0x00, 0x00, 0x00, 0xFF, - 0x00, 0x41, 0x30, 0x30, 0x30, 0x30, 0x30, 0x30, - 0x30, 0x30, 0x30, 0x30, 0x30, 0x31, 0x00, 0xD4, -}; -#endif - -int ft_board_setup(void *blob, bd_t *bd) -{ - u32 val[8]; - int rc, i = 0; - - ft_cpu_setup(blob, bd); -#ifdef CONFIG_FDT_FIXUP_PARTITIONS - fdt_fixup_mtdparts(blob, nodes, ARRAY_SIZE(nodes)); -#endif -#if defined(CONFIG_VIDEO) - fdt_add_edid(blob, "fsl,mpc5121-diu", edid_buf); -#endif - - /* Fixup NOR FLASH mapping */ - val[i++] = 0; /* chip select number */ - val[i++] = 0; /* always 0 */ - val[i++] = gd->bd->bi_flashstart; - val[i++] = gd->bd->bi_flashsize; - - /* Fixup MRAM mapping */ - val[i++] = 2; /* chip select number */ - val[i++] = 0; /* always 0 */ - val[i++] = CONFIG_SYS_MRAM_BASE; - val[i++] = CONFIG_SYS_MRAM_SIZE; - - rc = fdt_find_and_setprop(blob, "/localbus", "ranges", - val, i * sizeof(u32), 1); - if (rc) - printf("Unable to update localbus ranges, err=%s\n", - fdt_strerror(rc)); - - /* Fixup reg property in NOR Flash node */ - i = 0; - val[i++] = 0; /* always 0 */ - val[i++] = 0; /* start at offset 0 */ - val[i++] = flash_info[0].size; /* size of Bank 0 */ - - /* Second Bank available? */ - if (flash_info[1].size > 0) { - val[i++] = 0; /* always 0 */ - val[i++] = flash_info[0].size; /* offset of Bank 1 */ - val[i++] = flash_info[1].size; /* size of Bank 1 */ - } - - rc = fdt_find_and_setprop(blob, "/localbus/flash", "reg", - val, i * sizeof(u32), 1); - if (rc) - printf("Unable to update flash reg property, err=%s\n", - fdt_strerror(rc)); - - return 0; -} -#endif /* CONFIG_OF_BOARD_SETUP */ - -/* - * If argument is NULL, set the LCD brightness to the - * value from "brightness" environment variable. Set - * the LCD brightness to the value specified by the - * argument otherwise. Default brightness is zero. - */ -#define MAX_BRIGHTNESS 99 -static int set_lcd_brightness(char *brightness) -{ - struct stdio_dev *cop_port; - char *env; - char cmd_buf[20]; - int val = 0; - int cs = 0; - int len, i; - - if (brightness) { - val = simple_strtol(brightness, NULL, 10); - } else { - env = getenv("brightness"); - if (env) - val = simple_strtol(env, NULL, 10); - } - - if (val < 0) - val = 0; - - if (val > MAX_BRIGHTNESS) - val = MAX_BRIGHTNESS; - - sprintf(cmd_buf, "$SB;%04d;", val); - - len = strlen(cmd_buf); - for (i = 1; i <= len; i++) - cs += cmd_buf[i]; - - cs = (~cs + 1) & 0xff; - sprintf(cmd_buf + len, "%02X\n", cs); - - /* IO Coprocessor communication */ - cop_port = open_port(4, CONFIG_SYS_PDM360NG_COPROC_BAUDRATE); - if (!cop_port) { - printf("Error: Can't open IO Coprocessor port.\n"); - return -1; - } - - debug("%s: cmd: %s", __func__, cmd_buf); - write_port(cop_port, cmd_buf); - /* - * Wait for transmission and maybe response data - * before closing the port. - */ - udelay(CONFIG_SYS_PDM360NG_COPROC_READ_DELAY); - memset(cmd_buf, 0, sizeof(cmd_buf)); - len = read_port(cop_port, cmd_buf, sizeof(cmd_buf)); - if (len) - printf("Error: %s\n", cmd_buf); - - close_port(4); - - return 0; -} - -static int cmd_lcd_brightness(cmd_tbl_t *cmdtp, int flag, - int argc, char * const argv[]) -{ - if (argc < 2) - return cmd_usage(cmdtp); - - return set_lcd_brightness(argv[1]); -} - -U_BOOT_CMD(lcdbr, 2, 1, cmd_lcd_brightness, - "set LCD brightness", - "<brightness> - set LCD backlight level to <brightness>.\n" -); diff --git a/board/phytec/pcm030/Kconfig b/board/phytec/pcm030/Kconfig deleted file mode 100644 index 3a3eab8576..0000000000 --- a/board/phytec/pcm030/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_PCM030 - -config SYS_BOARD - default "pcm030" - -config SYS_VENDOR - default "phytec" - -config SYS_CONFIG_NAME - default "pcm030" - -endif diff --git a/board/phytec/pcm030/MAINTAINERS b/board/phytec/pcm030/MAINTAINERS deleted file mode 100644 index 4e2ab0d64e..0000000000 --- a/board/phytec/pcm030/MAINTAINERS +++ /dev/null @@ -1,7 +0,0 @@ -PCM030 BOARD -M: Jon Smirl jonsmirl@gmail.com -S: Maintained -F: board/phytec/pcm030/ -F: include/configs/pcm030.h -F: configs/pcm030_defconfig -F: configs/pcm030_LOWBOOT_defconfig diff --git a/board/phytec/pcm030/Makefile b/board/phytec/pcm030/Makefile deleted file mode 100644 index 2bb49dc7aa..0000000000 --- a/board/phytec/pcm030/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2003-2007 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := pcm030.o diff --git a/board/phytec/pcm030/README b/board/phytec/pcm030/README deleted file mode 100644 index 05faab68c8..0000000000 --- a/board/phytec/pcm030/README +++ /dev/null @@ -1,42 +0,0 @@ -To build RAMBOOT, replace this section the main Makefile - -pcm030_config \ -pcm030_RAMBOOT_config \ -pcm030_LOWBOOT_config: unconfig - @ >include/config.h - @[ -z "$(findstring LOWBOOT_,$@)" ] || \ - { echo "CONFIG_SYS_TEXT_BASE = 0xFF000000" >board/phytec/pcm030/config.tmp ; \ - echo "... with LOWBOOT configuration" ; \ - } - @[ -z "$(findstring RAMBOOT_,$@)" ] || \ - { echo "CONFIG_SYS_TEXT_BASE = 0x00100000" >board/phycore_mpc5200b_tiny/\ - config.tmp ; \ - echo "... with RAMBOOT configuration" ; \ - echo "... remember to make sure that MBAR is already \ - switched to 0xF0000000 !!!" ; \ - } - @$(MKCONFIG) -a pcm030 ppc mpc5xxx pcm030 phytec - @ echo "remember to set pcm030_REV to 0 for rev 1245.0 rev or to 1 for rev 1245.1" - -Alternative SDRAM settings: - -#define SDRAM_MODE 0x018D0000 -#define SDRAM_EMODE 0x40090000 -#define SDRAM_CONTROL 0x715f0f00 -#define SDRAM_CONFIG1 0x73722930 -#define SDRAM_CONFIG2 0x47770000 - -/* Settings for XLB = 99 MHz */ -#define SDRAM_MODE 0x008D0000 -#define SDRAM_EMODE 0x40090000 -#define SDRAM_CONTROL 0x714b0f00 -#define SDRAM_CONFIG1 0x63611730 -#define SDRAM_CONFIG2 0x47670000 - -The board ships default with the environment in EEPROM -Moving the environment to flash can be more reliable - -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0xfe0000) -#define CONFIG_ENV_SIZE 0x20000 -#define CONFIG_ENV_SECT_SIZE 0x20000 diff --git a/board/phytec/pcm030/mt46v32m16-75.h b/board/phytec/pcm030/mt46v32m16-75.h deleted file mode 100644 index 47fc7c04bd..0000000000 --- a/board/phytec/pcm030/mt46v32m16-75.h +++ /dev/null @@ -1,21 +0,0 @@ -/* - * (C) Copyright 2004 - * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com. - * - * Eric Schumann, Phytec Messtechnik - * adapted for mt46v32m16-75 DDR-RAM - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#define SDRAM_DDR 1 /* is DDR */ - -/* Settings for XLB = 132 MHz */ - -#define SDRAM_MODE 0x018D0000 -#define SDRAM_EMODE 0x40090000 -#define SDRAM_CONTROL 0x71500F00 -#define SDRAM_CONFIG1 0x73711930 -#define SDRAM_CONFIG2 0x47770000 - -#define SDRAM_TAPDELAY 0x10000000 /* reserved Bit in MPC5200 B3-Step */ diff --git a/board/phytec/pcm030/pcm030.c b/board/phytec/pcm030/pcm030.c deleted file mode 100644 index bdd980da91..0000000000 --- a/board/phytec/pcm030/pcm030.c +++ /dev/null @@ -1,209 +0,0 @@ -/* - * (C) Copyright 2003 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * (C) Copyright 2004 - * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com. - * - * (C) Copyright 2006 - * Eric Schumann, Phytec Messtechnik GmbH - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <mpc5xxx.h> -#include <pci.h> -#include <asm/io.h> - -#include "mt46v32m16-75.h" - -DECLARE_GLOBAL_DATA_PTR; - -#ifndef CONFIG_SYS_RAMBOOT -static void sdram_start(int hi_addr) -{ - volatile struct mpc5xxx_cdm *cdm = - (struct mpc5xxx_cdm *)MPC5XXX_CDM; - volatile struct mpc5xxx_sdram *sdram = - (struct mpc5xxx_sdram *)MPC5XXX_SDRAM; - - long hi_addr_bit = hi_addr ? 0x01000000 : 0; - - /* unlock mode register */ - out_be32 (&sdram->ctrl, - (SDRAM_CONTROL | 0x80000000 | hi_addr_bit)); - - /* precharge all banks */ - out_be32 (&sdram->ctrl, - (SDRAM_CONTROL | 0x80000002 | hi_addr_bit)); - -#ifdef SDRAM_DDR - /* set mode register: extended mode */ - out_be32 (&sdram->mode, (SDRAM_EMODE)); - - /* set mode register: reset DLL */ - out_be32 (&sdram->mode, - (SDRAM_MODE | 0x04000000)); -#endif - - /* precharge all banks */ - out_be32 (&sdram->ctrl, - (SDRAM_CONTROL | 0x80000002 | hi_addr_bit)); - - /* auto refresh */ - out_be32 (&sdram->ctrl, - (SDRAM_CONTROL | 0x80000004 | hi_addr_bit)); - - /* set mode register */ - out_be32 (&sdram->mode, (SDRAM_MODE)); - - /* normal operation */ - out_be32 (&sdram->ctrl, - (SDRAM_CONTROL | hi_addr_bit)); - - /* set CDM clock enable register, set MPC5200B SDRAM bus */ - /* to reduced driver strength */ - out_be32 (&cdm->clock_enable, (0x00CFFFFF)); -} -#endif - -/* - * ATTENTION: Although partially referenced dram_init does NOT make - * real use of CONFIG_SYS_SDRAM_BASE. The code does not - * work if CONFIG_SYS_SDRAM_BASE - * is something else than 0x00000000. - */ - -int dram_init(void) -{ - volatile struct mpc5xxx_mmap_ctl *mm = - (struct mpc5xxx_mmap_ctl *)CONFIG_SYS_MBAR; - volatile struct mpc5xxx_cdm *cdm = - (struct mpc5xxx_cdm *)MPC5XXX_CDM; - volatile struct mpc5xxx_sdram *sdram = - (struct mpc5xxx_sdram *)MPC5XXX_SDRAM; - ulong dramsize = 0; - ulong dramsize2 = 0; -#ifndef CONFIG_SYS_RAMBOOT - ulong test1, test2; - - /* setup SDRAM chip selects */ - /* 256MB at 0x0 */ - out_be32 (&mm->sdram0, 0x0000001b); - /* disabled */ - out_be32 (&mm->sdram1, 0x10000000); - - /* setup config registers */ - out_be32 (&sdram->config1, SDRAM_CONFIG1); - out_be32 (&sdram->config2, SDRAM_CONFIG2); - -#if defined(SDRAM_DDR) && defined(SDRAM_TAPDELAY) - /* set tap delay */ - out_be32 (&cdm->porcfg, SDRAM_TAPDELAY); -#endif - - /* find RAM size using SDRAM CS0 only */ - sdram_start(0); - test1 = get_ram_size((long *) CONFIG_SYS_SDRAM_BASE, 0x10000000); - sdram_start(1); - test2 = get_ram_size((long *) CONFIG_SYS_SDRAM_BASE, 0x10000000); - if (test1 > test2) { - sdram_start(0); - dramsize = test1; - } else - dramsize = test2; - - /* memory smaller than 1MB is impossible */ - if (dramsize < (1 << 20)) - dramsize = 0; - - /* set SDRAM CS0 size according to the amount of RAM found */ - if (dramsize > 0) { - out_be32 (&mm->sdram0, - (0x13 + __builtin_ffs(dramsize >> 20) - 1)); - } else { - /* disabled */ - out_be32 (&mm->sdram0, 0); - } - -#else /* CONFIG_SYS_RAMBOOT */ - - /* retrieve size of memory connected to SDRAM CS0 */ - dramsize = in_be32(&mm->sdram0) & 0xFF; - if (dramsize >= 0x13) - dramsize = (1 << (dramsize - 0x13)) << 20; - else - dramsize = 0; - - /* retrieve size of memory connected to SDRAM CS1 */ - dramsize2 = in_be32(&mm->sdram1) & 0xFF; - if (dramsize2 >= 0x13) - dramsize2 = (1 << (dramsize2 - 0x13)) << 20; - else - dramsize2 = 0; - -#endif /* CONFIG_SYS_RAMBOOT */ - - gd->ram_size = dramsize + dramsize2; - - return 0; -} - -int checkboard(void) -{ - puts("Board: phyCORE-MPC5200B-tiny\n"); - return 0; -} - -#ifdef CONFIG_PCI -static struct pci_controller hose; - -extern void pci_mpc5xxx_init(struct pci_controller *); - -void pci_init_board(void) -{ - pci_mpc5xxx_init(&hose); -} -#endif - -#ifdef CONFIG_OF_BOARD_SETUP -int ft_board_setup(void *blob, bd_t *bd) -{ - ft_cpu_setup(blob, bd); - - return 0; -} -#endif /* CONFIG_OF_BOARD_SETUP */ - -#if defined(CONFIG_IDE) && defined(CONFIG_IDE_RESET) - -#define GPIO_PSC2_4 0x02000000UL - -void init_ide_reset(void) -{ - volatile struct mpc5xxx_wu_gpio *wu_gpio = - (struct mpc5xxx_wu_gpio *)MPC5XXX_WU_GPIO; - debug("init_ide_reset\n"); - - /* Configure PSC2_4 as GPIO output for ATA reset */ - setbits_be32(&wu_gpio->enable, GPIO_PSC2_4); - setbits_be32(&wu_gpio->ddr, GPIO_PSC2_4); - /* Deassert reset */ - setbits_be32(&wu_gpio->dvo, GPIO_PSC2_4); -} - -void ide_set_reset(int idereset) -{ - volatile struct mpc5xxx_wu_gpio *wu_gpio = - (struct mpc5xxx_wu_gpio *)MPC5XXX_WU_GPIO; - debug("ide_reset(%d)\n", idereset); - - if (idereset) { - clrbits_be32(&wu_gpio->dvo, GPIO_PSC2_4); - /* Make a delay. MPC5200 spec says 25 usec min */ - udelay(500000); - } else - setbits_be32(&wu_gpio->dvo, GPIO_PSC2_4); -} -#endif /* defined(CONFIG_IDE) && defined(CONFIG_IDE_RESET) */ diff --git a/board/tqc/tqm5200/Kconfig b/board/tqc/tqm5200/Kconfig deleted file mode 100644 index 738dc80551..0000000000 --- a/board/tqc/tqm5200/Kconfig +++ /dev/null @@ -1,25 +0,0 @@ -if TARGET_CHARON - -config SYS_BOARD - default "tqm5200" - -config SYS_VENDOR - default "tqc" - -config SYS_CONFIG_NAME - default "charon" - -endif - -if TARGET_TQM5200 - -config SYS_BOARD - default "tqm5200" - -config SYS_VENDOR - default "tqc" - -config SYS_CONFIG_NAME - default "TQM5200" - -endif diff --git a/board/tqc/tqm5200/MAINTAINERS b/board/tqc/tqm5200/MAINTAINERS deleted file mode 100644 index 12d143d73f..0000000000 --- a/board/tqc/tqm5200/MAINTAINERS +++ /dev/null @@ -1,23 +0,0 @@ -TQM5200 BOARD -#M: - -S: Maintained -F: board/tqc/tqm5200/ -F: include/configs/aev.h -F: configs/aev_defconfig -F: include/configs/TQM5200.h -F: configs/cam5200_defconfig -F: configs/cam5200_niosflash_defconfig -F: configs/fo300_defconfig -F: configs/MiniFAP_defconfig -F: configs/TQM5200_defconfig -F: configs/TQM5200_B_defconfig -F: configs/TQM5200_B_HIGHBOOT_defconfig -F: configs/TQM5200_STK100_defconfig -F: configs/TQM5200S_defconfig -F: configs/TQM5200S_HIGHBOOT_defconfig - -CHARON BOARD -M: Heiko Schocher hs@denx.de -S: Maintained -F: include/configs/charon.h -F: configs/charon_defconfig diff --git a/board/tqc/tqm5200/Makefile b/board/tqc/tqm5200/Makefile deleted file mode 100644 index f7c97b72c8..0000000000 --- a/board/tqc/tqm5200/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2003-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := tqm5200.o cmd_stk52xx.o cam5200_flash.o diff --git a/board/tqc/tqm5200/cam5200_flash.c b/board/tqc/tqm5200/cam5200_flash.c deleted file mode 100644 index c3ae5c010b..0000000000 --- a/board/tqc/tqm5200/cam5200_flash.c +++ /dev/null @@ -1,768 +0,0 @@ -/* - * (C) Copyright 2006 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <mpc5xxx.h> -#include <asm/processor.h> - -#if defined(CONFIG_CAM5200) && defined(CONFIG_CAM5200_NIOSFLASH) - -#if 0 -#define DEBUGF(x...) printf(x) -#else -#define DEBUGF(x...) -#endif - -#define swap16(x) __swab16(x) - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -/* - * CAM5200 is a TQM5200B based board. Additionally it also features - * a NIOS cpu. The NIOS CPU peripherals are accessible through MPC5xxx - * Local Bus on CS5. This includes 32 bit wide RAM and SRAM as well as - * 16 bit wide flash device. Big Endian order on a 32 bit CS5 makes - * access to flash chip slightly more complicated as additional byte - * swapping is necessary within each 16 bit wide flash 'word'. - * - * This driver's task is to handle both flash devices: 32 bit TQM5200B - * flash chip and 16 bit NIOS cpu flash chip. In the below - * flash_addr_table table we use least significant address bit to mark - * 16 bit flash bank and two sets of routines *_32 and *_16 to handle - * specifics of both flashes. - */ -static unsigned long flash_addr_table[][CONFIG_SYS_MAX_FLASH_BANKS] = { - {CONFIG_SYS_BOOTCS_START, CONFIG_SYS_CS5_START | 1} -}; - -/*----------------------------------------------------------------------- - * Functions - */ -static int write_word(flash_info_t * info, ulong dest, ulong data); -#ifdef CONFIG_SYS_FLASH_2ND_16BIT_DEV -static int write_word_32(flash_info_t * info, ulong dest, ulong data); -static int write_word_16(flash_info_t * info, ulong dest, ulong data); -static int flash_erase_32(flash_info_t * info, int s_first, int s_last); -static int flash_erase_16(flash_info_t * info, int s_first, int s_last); -static ulong flash_get_size_32(vu_long * addr, flash_info_t * info); -static ulong flash_get_size_16(vu_long * addr, flash_info_t * info); -#endif - -void flash_print_info(flash_info_t * info) -{ - int i, k; - int size, erased; - volatile unsigned long *flash; - - if (info->flash_id == FLASH_UNKNOWN) { - printf("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_AMD: - printf("AMD "); - break; - case FLASH_MAN_FUJ: - printf("FUJITSU "); - break; - default: - printf("Unknown Vendor "); - break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_S29GL128N: - printf ("S29GL128N (256 Mbit, uniform sector size)\n"); - break; - case FLASH_AM320B: - printf ("29LV320B (32 Mbit, bottom boot sect)\n"); - break; - case FLASH_AM320T: - printf ("29LV320T (32 Mbit, top boot sect)\n"); - break; - default: - printf("Unknown Chip Type\n"); - break; - } - - printf(" Size: %ld KB in %d Sectors\n", - info->size >> 10, info->sector_count); - - printf(" Sector Start Addresses:"); - for (i = 0; i < info->sector_count; ++i) { - /* - * Check if whole sector is erased - */ - if (i != (info->sector_count - 1)) - size = info->start[i + 1] - info->start[i]; - else - size = info->start[0] + info->size - info->start[i]; - - erased = 1; - flash = (volatile unsigned long *)info->start[i]; - size = size >> 2; /* divide by 4 for longword access */ - - for (k = 0; k < size; k++) { - if (*flash++ != 0xffffffff) { - erased = 0; - break; - } - } - - if ((i % 5) == 0) - printf("\n "); - - printf(" %08lX%s%s", info->start[i], - erased ? " E" : " ", - info->protect[i] ? "RO " : " "); - } - printf("\n"); - return; -} - - -/* - * The following code cannot be run from FLASH! - */ -#ifdef CONFIG_SYS_FLASH_2ND_16BIT_DEV -static ulong flash_get_size(vu_long * addr, flash_info_t * info) -{ - - DEBUGF("get_size: FLASH ADDR %08lx\n", addr); - - /* bit 0 used for big flash marking */ - if ((ulong)addr & 0x1) - return flash_get_size_16((vu_long *)((ulong)addr & 0xfffffffe), info); - else - return flash_get_size_32(addr, info); -} - -static ulong flash_get_size_32(vu_long * addr, flash_info_t * info) -#else -static ulong flash_get_size(vu_long * addr, flash_info_t * info) -#endif -{ - short i; - CONFIG_SYS_FLASH_WORD_SIZE value; - ulong base = (ulong) addr; - volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) addr; - - DEBUGF("get_size32: FLASH ADDR: %08x\n", (unsigned)addr); - - /* Write auto select command: read Manufacturer ID */ - addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA; - addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055; - addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00900090; - udelay(1000); - - value = addr2[0]; - DEBUGF("FLASH MANUFACT: %x\n", value); - - switch (value) { - case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_MANUFACT: - info->flash_id = FLASH_MAN_AMD; - break; - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - return (0); /* no or unknown flash */ - } - - value = addr2[1]; /* device ID */ - DEBUGF("\nFLASH DEVICEID: %x\n", value); - - switch (value) { - case AMD_ID_MIRROR: - DEBUGF("Mirror Bit flash: addr[14] = %08lX addr[15] = %08lX\n", - addr[14], addr[15]); - switch(addr[14]) { - case AMD_ID_GL128N_2: - if (addr[15] != AMD_ID_GL128N_3) { - DEBUGF("Chip: S29GL128N -> unknown\n"); - info->flash_id = FLASH_UNKNOWN; - } else { - DEBUGF("Chip: S29GL128N\n"); - info->flash_id += FLASH_S29GL128N; - info->sector_count = 128; - info->size = 0x02000000; - } - break; - default: - info->flash_id = FLASH_UNKNOWN; - return(0); - } - break; - - default: - info->flash_id = FLASH_UNKNOWN; - return (0); /* => no or unknown flash */ - } - - /* set up sector start address table */ - for (i = 0; i < info->sector_count; i++) - info->start[i] = base + (i * 0x00040000); - - /* check for protected sectors */ - for (i = 0; i < info->sector_count; i++) { - /* read sector protection at sector address, (A7 .. A0) = 0x02 */ - /* D0 = 1 if protected */ - addr2 = (volatile CONFIG_SYS_FLASH_WORD_SIZE *)(info->start[i]); - - info->protect[i] = addr2[2] & 1; - } - - /* issue bank reset to return to read mode */ - addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00F000F0; - - return (info->size); -} - -static int wait_for_DQ7_32(flash_info_t * info, int sect) -{ - ulong start, now, last; - volatile CONFIG_SYS_FLASH_WORD_SIZE *addr = - (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]); - - start = get_timer(0); - last = start; - while ((addr[0] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) != - (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) { - if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf("Timeout\n"); - return -1; - } - /* show that we're waiting */ - if ((now - last) > 1000) { /* every second */ - putc('.'); - last = now; - } - } - return 0; -} - -#ifdef CONFIG_SYS_FLASH_2ND_16BIT_DEV -int flash_erase(flash_info_t * info, int s_first, int s_last) -{ - if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320B) { - return flash_erase_16(info, s_first, s_last); - } else { - return flash_erase_32(info, s_first, s_last); - } -} - -static int flash_erase_32(flash_info_t * info, int s_first, int s_last) -#else -int flash_erase(flash_info_t * info, int s_first, int s_last) -#endif -{ - volatile CONFIG_SYS_FLASH_WORD_SIZE *addr = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]); - volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2; - int flag, prot, sect; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) - printf("- missing\n"); - else - printf("- no sectors to erase\n"); - return 1; - } - - if (info->flash_id == FLASH_UNKNOWN) { - printf("Can't erase unknown flash type - aborted\n"); - return 1; - } - - prot = 0; - for (sect = s_first; sect <= s_last; ++sect) { - if (info->protect[sect]) - prot++; - } - - if (prot) - printf("- Warning: %d protected sectors will not be erased!", prot); - - printf("\n"); - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect <= s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]); - - addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA; - addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055; - addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080; - addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA; - addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055; - addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00300030; /* sector erase */ - - /* - * Wait for each sector to complete, it's more - * reliable. According to AMD Spec, you must - * issue all erase commands within a specified - * timeout. This has been seen to fail, especially - * if printf()s are included (for debug)!! - */ - wait_for_DQ7_32(info, sect); - } - } - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* wait at least 80us - let's wait 1 ms */ - udelay(1000); - - /* reset to read mode */ - addr = (CONFIG_SYS_FLASH_WORD_SIZE *) info->start[0]; - addr[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00F000F0; /* reset bank */ - - printf(" done\n"); - return 0; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt) -{ - ulong cp, wp, data; - int i, l, rc; - - wp = (addr & ~3); /* get lower word aligned address */ - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i = 0, cp = wp; i < l; ++i, ++cp) - data = (data << 8) | (*(uchar *) cp); - - for (; i < 4 && cnt > 0; ++i) { - data = (data << 8) | *src++; - --cnt; - ++cp; - } - - for (; cnt == 0 && i < 4; ++i, ++cp) - data = (data << 8) | (*(uchar *) cp); - - if ((rc = write_word(info, wp, data)) != 0) - return (rc); - - wp += 4; - } - - /* - * handle word aligned part - */ - while (cnt >= 4) { - data = 0; - for (i = 0; i < 4; ++i) - data = (data << 8) | *src++; - - if ((rc = write_word(info, wp, data)) != 0) - return (rc); - - wp += 4; - cnt -= 4; - } - - if (cnt == 0) - return (0); - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) { - data = (data << 8) | *src++; - --cnt; - } - for (; i < 4; ++i, ++cp) - data = (data << 8) | (*(uchar *) cp); - - return (write_word(info, wp, data)); -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -#ifdef CONFIG_SYS_FLASH_2ND_16BIT_DEV -static int write_word(flash_info_t * info, ulong dest, ulong data) -{ - if ((info->flash_id & FLASH_TYPEMASK) == FLASH_AM320B) { - return write_word_16(info, dest, data); - } else { - return write_word_32(info, dest, data); - } -} - -static int write_word_32(flash_info_t * info, ulong dest, ulong data) -#else -static int write_word(flash_info_t * info, ulong dest, ulong data) -#endif -{ - volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]); - volatile CONFIG_SYS_FLASH_WORD_SIZE *dest2 = (CONFIG_SYS_FLASH_WORD_SIZE *) dest; - ulong *datap = &data; - volatile CONFIG_SYS_FLASH_WORD_SIZE *data2 = - (volatile CONFIG_SYS_FLASH_WORD_SIZE *)datap; - ulong start; - int i, flag; - - /* Check if Flash is (sufficiently) erased */ - if ((*((vu_long *)dest) & data) != data) - return (2); - - for (i = 0; i < 4 / sizeof(CONFIG_SYS_FLASH_WORD_SIZE); i++) { - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00AA00AA; - addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00550055; - addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x00A000A0; - - dest2[i] = data2[i]; - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* data polling for D7 */ - start = get_timer(0); - while ((dest2[i] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080) != - (data2[i] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x00800080)) { - - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) - return (1); - } - } - - return (0); -} - -#ifdef CONFIG_SYS_FLASH_2ND_16BIT_DEV - -#undef CONFIG_SYS_FLASH_WORD_SIZE -#define CONFIG_SYS_FLASH_WORD_SIZE unsigned short - -/* - * The following code cannot be run from FLASH! - */ -static ulong flash_get_size_16(vu_long * addr, flash_info_t * info) -{ - short i; - CONFIG_SYS_FLASH_WORD_SIZE value; - ulong base = (ulong) addr; - volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) addr; - - DEBUGF("get_size16: FLASH ADDR: %08x\n", (unsigned)addr); - - /* issue bank reset to return to read mode */ - addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xF000F000; - - /* Write auto select command: read Manufacturer ID */ - addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xAA00AA00; - addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x55005500; - addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x90009000; - udelay(1000); - - value = swap16(addr2[0]); - DEBUGF("FLASH MANUFACT: %x\n", value); - - switch (value) { - case (CONFIG_SYS_FLASH_WORD_SIZE) AMD_MANUFACT: - info->flash_id = FLASH_MAN_AMD; - break; - case (CONFIG_SYS_FLASH_WORD_SIZE) FUJ_MANUFACT: - info->flash_id = FLASH_MAN_FUJ; - break; - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - return (0); /* no or unknown flash */ - } - - value = swap16(addr2[1]); /* device ID */ - DEBUGF("\nFLASH DEVICEID: %x\n", value); - - switch (value) { - case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV320B: - info->flash_id += FLASH_AM320B; - info->sector_count = 71; - info->size = 0x00400000; - break; /* => 4 MB */ - case (CONFIG_SYS_FLASH_WORD_SIZE)AMD_ID_LV320T: - info->flash_id += FLASH_AM320T; - info->sector_count = 71; - info->size = 0x00400000; - break; /* => 4 MB */ - default: - info->flash_id = FLASH_UNKNOWN; - return (0); /* => no or unknown flash */ - } - - if (info->flash_id & FLASH_BTYPE) { - /* set sector offsets for bottom boot block type */ - info->start[0] = base + 0x00000000; - info->start[1] = base + 0x00002000; - info->start[2] = base + 0x00004000; - info->start[3] = base + 0x00006000; - info->start[4] = base + 0x00008000; - info->start[5] = base + 0x0000a000; - info->start[6] = base + 0x0000c000; - info->start[7] = base + 0x0000e000; - - for (i = 8; i < info->sector_count; i++) - info->start[i] = base + (i * 0x00010000) - 0x00070000; - } else { - /* set sector offsets for top boot block type */ - i = info->sector_count - 1; - info->start[i--] = base + info->size - 0x00002000; - info->start[i--] = base + info->size - 0x00004000; - info->start[i--] = base + info->size - 0x00006000; - info->start[i--] = base + info->size - 0x00008000; - info->start[i--] = base + info->size - 0x0000a000; - info->start[i--] = base + info->size - 0x0000c000; - info->start[i--] = base + info->size - 0x0000e000; - - for (; i >= 0; i--) - info->start[i] = base + i * 0x00010000; - } - - /* check for protected sectors */ - for (i = 0; i < info->sector_count; i++) { - /* read sector protection at sector address, (A7 .. A0) = 0x02 */ - /* D0 = 1 if protected */ - addr2 = (volatile CONFIG_SYS_FLASH_WORD_SIZE *)(info->start[i]); - - info->protect[i] = addr2[2] & 1; - } - - /* issue bank reset to return to read mode */ - addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xF000F000; - - return (info->size); -} - -static int wait_for_DQ7_16(flash_info_t * info, int sect) -{ - ulong start, now, last; - volatile CONFIG_SYS_FLASH_WORD_SIZE *addr = - (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]); - - start = get_timer(0); - last = start; - while ((addr[0] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x80008000) != - (CONFIG_SYS_FLASH_WORD_SIZE) 0x80008000) { - if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf("Timeout\n"); - return -1; - } - /* show that we're waiting */ - if ((now - last) > 1000) { /* every second */ - putc('.'); - last = now; - } - } - return 0; -} - -static int flash_erase_16(flash_info_t * info, int s_first, int s_last) -{ - volatile CONFIG_SYS_FLASH_WORD_SIZE *addr = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]); - volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2; - int flag, prot, sect; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) - printf("- missing\n"); - else - printf("- no sectors to erase\n"); - return 1; - } - - if (info->flash_id == FLASH_UNKNOWN) { - printf("Can't erase unknown flash type - aborted\n"); - return 1; - } - - prot = 0; - for (sect = s_first; sect <= s_last; ++sect) { - if (info->protect[sect]) - prot++; - } - - if (prot) - printf("- Warning: %d protected sectors will not be erased!", prot); - - printf("\n"); - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect <= s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[sect]); - - addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xAA00AA00; - addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x55005500; - addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x80008000; - addr[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xAA00AA00; - addr[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x55005500; - addr2[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x30003000; /* sector erase */ - - /* - * Wait for each sector to complete, it's more - * reliable. According to AMD Spec, you must - * issue all erase commands within a specified - * timeout. This has been seen to fail, especially - * if printf()s are included (for debug)!! - */ - wait_for_DQ7_16(info, sect); - } - } - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* wait at least 80us - let's wait 1 ms */ - udelay(1000); - - /* reset to read mode */ - addr = (CONFIG_SYS_FLASH_WORD_SIZE *) info->start[0]; - addr[0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xF000F000; /* reset bank */ - - printf(" done\n"); - return 0; -} - -static int write_word_16(flash_info_t * info, ulong dest, ulong data) -{ - volatile CONFIG_SYS_FLASH_WORD_SIZE *addr2 = (CONFIG_SYS_FLASH_WORD_SIZE *) (info->start[0]); - volatile CONFIG_SYS_FLASH_WORD_SIZE *dest2 = (CONFIG_SYS_FLASH_WORD_SIZE *) dest; - ulong *datap = &data; - volatile CONFIG_SYS_FLASH_WORD_SIZE *data2 = - (volatile CONFIG_SYS_FLASH_WORD_SIZE *)datap; - ulong start; - int i; - - /* Check if Flash is (sufficiently) erased */ - for (i = 0; i < 4 / sizeof(CONFIG_SYS_FLASH_WORD_SIZE); i++) { - if ((dest2[i] & swap16(data2[i])) != swap16(data2[i])) - return (2); - } - - for (i = 0; i < 4 / sizeof(CONFIG_SYS_FLASH_WORD_SIZE); i++) { - int flag; - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xAA00AA00; - addr2[CONFIG_SYS_FLASH_ADDR1] = (CONFIG_SYS_FLASH_WORD_SIZE) 0x55005500; - addr2[CONFIG_SYS_FLASH_ADDR0] = (CONFIG_SYS_FLASH_WORD_SIZE) 0xA000A000; - - dest2[i] = swap16(data2[i]); - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* data polling for D7 */ - start = get_timer(0); - while ((dest2[i] & (CONFIG_SYS_FLASH_WORD_SIZE) 0x80008000) != - (swap16(data2[i]) & (CONFIG_SYS_FLASH_WORD_SIZE) 0x80008000)) { - - if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - return (1); - } - } - } - - return (0); -} -#endif /* CONFIG_SYS_FLASH_2ND_16BIT_DEV */ - -/*----------------------------------------------------------------------- - * Functions - */ -static ulong flash_get_size(vu_long * addr, flash_info_t * info); -static int write_word(flash_info_t * info, ulong dest, ulong data); - -/*----------------------------------------------------------------------- - */ - -unsigned long flash_init(void) -{ - unsigned long total_b = 0; - unsigned long size_b[CONFIG_SYS_MAX_FLASH_BANKS]; - unsigned short index = 0; - int i; - - DEBUGF("\n"); - DEBUGF("FLASH: Index: %d\n", index); - - /* Init: no FLASHes known */ - for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; ++i) { - flash_info[i].flash_id = FLASH_UNKNOWN; - flash_info[i].sector_count = -1; - flash_info[i].size = 0; - - /* check whether the address is 0 */ - if (flash_addr_table[index][i] == 0) - continue; - - /* call flash_get_size() to initialize sector address */ - size_b[i] = flash_get_size((vu_long *) flash_addr_table[index][i], - &flash_info[i]); - - flash_info[i].size = size_b[i]; - - if (flash_info[i].flash_id == FLASH_UNKNOWN) { - printf("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n", - i+1, size_b[i], size_b[i] << 20); - flash_info[i].sector_count = -1; - flash_info[i].size = 0; - } - - /* Monitor protection ON by default */ - (void)flash_protect(FLAG_PROTECT_SET, CONFIG_SYS_MONITOR_BASE, - CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN - 1, - &flash_info[i]); -#if defined(CONFIG_ENV_IS_IN_FLASH) - (void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR, - CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE - 1, - &flash_info[i]); -#if defined(CONFIG_ENV_ADDR_REDUND) - (void)flash_protect(FLAG_PROTECT_SET, CONFIG_ENV_ADDR_REDUND, - CONFIG_ENV_ADDR_REDUND + CONFIG_ENV_SECT_SIZE - 1, - &flash_info[i]); -#endif -#endif - total_b += flash_info[i].size; - } - - return total_b; -} -#endif /* if defined(CONFIG_CAM5200) && defined(CONFIG_CAM5200_NIOSFLASH) */ diff --git a/board/tqc/tqm5200/cmd_stk52xx.c b/board/tqc/tqm5200/cmd_stk52xx.c deleted file mode 100644 index a3916ed957..0000000000 --- a/board/tqc/tqm5200/cmd_stk52xx.c +++ /dev/null @@ -1,1228 +0,0 @@ -/* - * (C) Copyright 2005 - * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * STK52XX specific functions - */ -/*#define DEBUG*/ - -#include <common.h> -#include <command.h> -#include <console.h> - -#if defined(CONFIG_CMD_BSP) - -#if defined(CONFIG_STK52XX) || defined(CONFIG_FO300) -#define DEFAULT_VOL 45 -#define DEFAULT_FREQ 500 -#define DEFAULT_DURATION 200 -#define LEFT 1 -#define RIGHT 2 -#define LEFT_RIGHT 3 -#define BL_OFF 0 -#define BL_ON 1 - -#define SM501_GPIO_CTRL_LOW 0x00000008UL -#define SM501_GPIO_CTRL_HIGH 0x0000000CUL -#define SM501_POWER_MODE0_GATE 0x00000040UL -#define SM501_POWER_MODE1_GATE 0x00000048UL -#define POWER_MODE_GATE_GPIO_PWM_I2C 0x00000040UL -#define SM501_GPIO_DATA_LOW 0x00010000UL -#define SM501_GPIO_DATA_HIGH 0x00010004UL -#define SM501_GPIO_DATA_DIR_LOW 0x00010008UL -#define SM501_GPIO_DATA_DIR_HIGH 0x0001000CUL -#define SM501_PANEL_DISPLAY_CONTROL 0x00080000UL - -static int i2s_squarewave(unsigned long duration, unsigned int freq, - unsigned int channel); -static int i2s_sawtooth(unsigned long duration, unsigned int freq, - unsigned int channel); -static void spi_init(void); -static int spi_transmit(unsigned char data); -static void pcm1772_write_reg(unsigned char addr, unsigned char data); -static void set_attenuation(unsigned char attenuation); - -static void spi_init(void) -{ - struct mpc5xxx_spi *spi = (struct mpc5xxx_spi*)MPC5XXX_SPI; - struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio*)MPC5XXX_GPIO; - - /* PSC3 as SPI and GPIOs */ - gpio->port_config &= 0xFFFFF0FF; - gpio->port_config |= 0x00000800; - /* - * Its important to use the correct order when initializing the - * registers - */ - spi->ddr = 0x0F; /* set all SPI pins as output */ - spi->pdr = 0x08; /* set SS high */ - spi->cr1 = 0x50; /* SPI is master, SS is general purpose output */ - spi->cr2 = 0x00; /* normal operation */ - spi->brr = 0xFF; /* baud rate: IPB clock / 2048 */ -} - -static int spi_transmit(unsigned char data) -{ - struct mpc5xxx_spi *spi = (struct mpc5xxx_spi*)MPC5XXX_SPI; - - spi->dr = data; - /* wait for SPI transmission completed */ - while (!(spi->sr & 0x80)) { - if (spi->sr & 0x40) { /* if write collision occurred */ - int dummy; - - /* do dummy read to clear status register */ - dummy = spi->dr; - printf("SPI write collision: dr=0x%x\n", dummy); - return -1; - } - } - return (spi->dr); -} - -static void pcm1772_write_reg(unsigned char addr, unsigned char data) -{ - struct mpc5xxx_spi *spi = (struct mpc5xxx_spi*)MPC5XXX_SPI; - - spi->pdr = 0x00; /* Set SS low */ - spi_transmit(addr); - spi_transmit(data); - /* wait some time to meet MS# hold time of PCM1772 */ - udelay (1); - spi->pdr = 0x08; /* set SS high */ -} - -static void set_attenuation(unsigned char attenuation) -{ - pcm1772_write_reg(0x01, attenuation); /* left channel */ - debug ("PCM1772 attenuation left set to %d.\n", attenuation); - pcm1772_write_reg(0x02, attenuation); /* right channel */ - debug ("PCM1772 attenuation right set to %d.\n", attenuation); -} - -void amplifier_init(void) -{ - static int init_done = 0; - int i; - struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio*)MPC5XXX_GPIO; - - /* Do this only once, because of the long time delay */ - if (!init_done) { - /* configure PCM1772 audio format as I2S */ - pcm1772_write_reg(0x03, 0x01); - /* enable audio amplifier */ - gpio->sint_gpioe |= 0x02; /* PSC3_5 as GPIO */ - gpio->sint_ode &= ~0x02; /* PSC3_5 is not open Drain */ - gpio->sint_dvo &= ~0x02; /* PSC3_5 is LOW */ - gpio->sint_ddr |= 0x02; /* PSC3_5 as output */ - /* - * wait some time to allow amplifier to recover from shutdown - * mode. - */ - for(i = 0; i < 350; i++) - udelay(1000); - /* - * The used amplifier (LM4867) has a so called "pop and click" - * elmination filter. The input signal of the amplifier must - * exceed a certain level once after power up to activate the - * generation of the output signal. This is achieved by - * sending a low frequent (nearly inaudible) sawtooth with a - * sufficient signal level. - */ - set_attenuation(50); - i2s_sawtooth (200, 5, LEFT_RIGHT); - init_done = 1; - } -} - -static void i2s_init(void) -{ - unsigned long i; - struct mpc5xxx_psc *psc = (struct mpc5xxx_psc*)MPC5XXX_PSC2; - struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio*)MPC5XXX_GPIO; - - gpio->port_config |= 0x00000070; /* PSC2 ports as Codec with MCLK */ - psc->command = (PSC_RX_DISABLE | PSC_TX_DISABLE); - psc->sicr = 0x22E00000; /* 16 bit data; I2S */ - - *(vu_long *)(CONFIG_SYS_MBAR + 0x22C) = 0x805d; /* PSC2 CDM MCLK config; MCLK - * 5.617 MHz */ - *(vu_long *)(CONFIG_SYS_MBAR + 0x214) |= 0x00000040; /* CDM clock enable - * register */ - psc->ccr = 0x1F03; /* 16 bit data width; 5.617MHz MCLK */ - psc->ctur = 0x0F; /* 16 bit frame width */ - - for (i = 0; i < 128; i++) - psc->psc_buffer_32 = 0; /* clear tx fifo */ -} - -static int i2s_play_wave(unsigned long addr, unsigned long len) -{ - unsigned long i; - unsigned char *wave_file = (uchar *)addr + 44; /* quick'n dirty: skip - * wav header*/ - struct mpc5xxx_psc *psc = (struct mpc5xxx_psc*)MPC5XXX_PSC2; - - /* - * play wave file in memory; bytes/words are be swapped - */ - psc->command = (PSC_RX_ENABLE | PSC_TX_ENABLE); - - for(i = 0;i < (len / 4); i++) { - unsigned char swapped[4]; - unsigned long *p = (unsigned long*)swapped; - - swapped[3] = *wave_file++; - swapped[2] = *wave_file++; - swapped[1] = *wave_file++; - swapped[0] = *wave_file++; - - psc->psc_buffer_32 = *p; - - while (psc->tfnum > 400) { - if(ctrlc()) - return 0; - } - } - while (psc->tfnum > 0); /* wait for fifo empty */ - udelay (100); - psc->command = (PSC_RX_DISABLE | PSC_TX_DISABLE); - return 0; -} - -static int i2s_sawtooth(unsigned long duration, unsigned int freq, - unsigned int channel) -{ - long i,j; - unsigned long data; - struct mpc5xxx_psc *psc = (struct mpc5xxx_psc*)MPC5XXX_PSC2; - - psc->command = (PSC_RX_ENABLE | PSC_TX_ENABLE); - - /* - * Generate sawtooth. Start with middle level up to highest level. Then - * go to lowest level and back to middle level. - */ - for(j = 0; j < ((duration * freq) / 1000); j++) { - for(i = 0; i <= 0x7FFF; i += (0x7FFF/(44100/(freq*4)))) { - data = (i & 0xFFFF); - /* data format: right data left data) */ - if (channel == LEFT_RIGHT) - data |= (data<<16); - if (channel == RIGHT) - data = (data<<16); - psc->psc_buffer_32 = data; - while (psc->tfnum > 400); - } - for(i = 0x7FFF; i >= -0x7FFF; i -= (0xFFFF/(44100/(freq*2)))) { - data = (i & 0xFFFF); - /* data format: right data left data) */ - if (channel == LEFT_RIGHT) - data |= (data<<16); - if (channel == RIGHT) - data = (data<<16); - psc->psc_buffer_32 = data; - while (psc->tfnum > 400); - } - for(i = -0x7FFF; i <= 0; i += (0x7FFF/(44100/(freq*4)))) { - data = (i & 0xFFFF); - /* data format: right data left data) */ - if (channel == LEFT_RIGHT) - data |= (data<<16); - if (channel == RIGHT) - data = (data<<16); - psc->psc_buffer_32 = data; - while (psc->tfnum > 400); - } - } - while (psc->tfnum > 0); /* wait for fifo empty */ - udelay (100); - psc->command = (PSC_RX_DISABLE | PSC_TX_DISABLE); - - return 0; -} - -static int i2s_squarewave(unsigned long duration, unsigned int freq, - unsigned int channel) -{ - long i,j; - unsigned long data; - struct mpc5xxx_psc *psc = (struct mpc5xxx_psc*)MPC5XXX_PSC2; - - psc->command = (PSC_RX_ENABLE | PSC_TX_ENABLE); - - /* - * Generate sqarewave. Start with high level, duty cycle 1:1. - */ - for(j = 0; j < ((duration * freq) / 1000); j++) { - for(i = 0; i < (44100/(freq*2)); i ++) { - data = 0x7FFF; - /* data format: right data left data) */ - if (channel == LEFT_RIGHT) - data |= (data<<16); - if (channel == RIGHT) - data = (data<<16); - psc->psc_buffer_32 = data; - while (psc->tfnum > 400); - } - for(i = 0; i < (44100/(freq*2)); i ++) { - data = 0x8000; - /* data format: right data left data) */ - if (channel == LEFT_RIGHT) - data |= (data<<16); - if (channel == RIGHT) - data = (data<<16); - psc->psc_buffer_32 = data; - while (psc->tfnum > 400); - } - } - while (psc->tfnum > 0); /* wait for fifo empty */ - udelay (100); - psc->command = (PSC_RX_DISABLE | PSC_TX_DISABLE); - - return 0; -} - -static int cmd_sound(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - unsigned long reg, val, duration; - char *tmp; - unsigned int freq, channel; - unsigned char volume; - int rcode = 1; - -#ifdef CONFIG_STK52XX_REV100 - printf ("Revision 100 of STK52XX not supported!\n"); - return 1; -#endif - spi_init(); - i2s_init(); - amplifier_init(); - - if ((tmp = getenv ("volume")) != NULL) { - volume = simple_strtoul (tmp, NULL, 10); - } else { - volume = DEFAULT_VOL; - } - set_attenuation(volume); - - switch (argc) { - case 0: - case 1: - return cmd_usage(cmdtp); - case 2: - if (strncmp(argv[1],"saw",3) == 0) { - printf ("Play sawtooth\n"); - rcode = i2s_sawtooth (DEFAULT_DURATION, DEFAULT_FREQ, - LEFT_RIGHT); - return rcode; - } else if (strncmp(argv[1],"squ",3) == 0) { - printf ("Play squarewave\n"); - rcode = i2s_squarewave (DEFAULT_DURATION, DEFAULT_FREQ, - LEFT_RIGHT); - return rcode; - } - - return cmd_usage(cmdtp); - case 3: - if (strncmp(argv[1],"saw",3) == 0) { - duration = simple_strtoul(argv[2], NULL, 10); - printf ("Play sawtooth\n"); - rcode = i2s_sawtooth (duration, DEFAULT_FREQ, - LEFT_RIGHT); - return rcode; - } else if (strncmp(argv[1],"squ",3) == 0) { - duration = simple_strtoul(argv[2], NULL, 10); - printf ("Play squarewave\n"); - rcode = i2s_squarewave (duration, DEFAULT_FREQ, - LEFT_RIGHT); - return rcode; - } - return cmd_usage(cmdtp); - case 4: - if (strncmp(argv[1],"saw",3) == 0) { - duration = simple_strtoul(argv[2], NULL, 10); - freq = (unsigned int)simple_strtoul(argv[3], NULL, 10); - printf ("Play sawtooth\n"); - rcode = i2s_sawtooth (duration, freq, - LEFT_RIGHT); - return rcode; - } else if (strncmp(argv[1],"squ",3) == 0) { - duration = simple_strtoul(argv[2], NULL, 10); - freq = (unsigned int)simple_strtoul(argv[3], NULL, 10); - printf ("Play squarewave\n"); - rcode = i2s_squarewave (duration, freq, - LEFT_RIGHT); - return rcode; - } else if (strcmp(argv[1],"pcm1772") == 0) { - reg = simple_strtoul(argv[2], NULL, 10); - val = simple_strtoul(argv[3], NULL, 10); - printf("Set PCM1772 %lu. %lu\n", reg, val); - pcm1772_write_reg((uchar)reg, (uchar)val); - return 0; - } - return cmd_usage(cmdtp); - case 5: - if (strncmp(argv[1],"saw",3) == 0) { - duration = simple_strtoul(argv[2], NULL, 10); - freq = (unsigned int)simple_strtoul(argv[3], NULL, 10); - if (strncmp(argv[4],"l",1) == 0) - channel = LEFT; - else if (strncmp(argv[4],"r",1) == 0) - channel = RIGHT; - else - channel = LEFT_RIGHT; - printf ("Play squarewave\n"); - rcode = i2s_sawtooth (duration, freq, - channel); - return rcode; - } else if (strncmp(argv[1],"squ",3) == 0) { - duration = simple_strtoul(argv[2], NULL, 10); - freq = (unsigned int)simple_strtoul(argv[3], NULL, 10); - if (strncmp(argv[4],"l",1) == 0) - channel = LEFT; - else if (strncmp(argv[4],"r",1) == 0) - channel = RIGHT; - else - channel = LEFT_RIGHT; - printf ("Play squarewave\n"); - rcode = i2s_squarewave (duration, freq, - channel); - return rcode; - } - return cmd_usage(cmdtp); - } - printf ("Usage:\nsound cmd [arg1] [arg2] ...\n"); - return 1; -} - -static int cmd_wav(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - unsigned long length, addr; - unsigned char volume; - int rcode = 1; - char *tmp; - -#ifdef CONFIG_STK52XX_REV100 - printf ("Revision 100 of STK52XX not supported!\n"); - return 1; -#endif - spi_init(); - i2s_init(); - amplifier_init(); - - switch (argc) { - - case 3: - length = simple_strtoul(argv[2], NULL, 16); - addr = simple_strtoul(argv[1], NULL, 16); - break; - - case 2: - if ((tmp = getenv ("filesize")) != NULL) { - length = simple_strtoul (tmp, NULL, 16); - } else { - puts ("No filesize provided\n"); - return 1; - } - addr = simple_strtoul(argv[1], NULL, 16); - - case 1: - if ((tmp = getenv ("filesize")) != NULL) { - length = simple_strtoul (tmp, NULL, 16); - } else { - puts ("No filesize provided\n"); - return 1; - } - if ((tmp = getenv ("loadaddr")) != NULL) { - addr = simple_strtoul (tmp, NULL, 16); - } else { - puts ("No loadaddr provided\n"); - return 1; - } - break; - - default: - printf("Usage:\nwav <addr> <length[s]\n"); - return 1; - break; - } - - if ((tmp = getenv ("volume")) != NULL) { - volume = simple_strtoul (tmp, NULL, 10); - } else { - volume = DEFAULT_VOL; - } - set_attenuation(volume); - - printf("Play wave file at %lX with length %lX\n", addr, length); - rcode = i2s_play_wave(addr, length); - - return rcode; -} - -static int cmd_beep(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - unsigned char volume; - unsigned int channel; - int rcode; - char *tmp; - -#ifdef CONFIG_STK52XX_REV100 - printf ("Revision 100 of STK52XX not supported!\n"); - return 1; -#endif - spi_init(); - i2s_init(); - amplifier_init(); - - switch (argc) { - case 0: - case 1: - channel = LEFT_RIGHT; - break; - case 2: - if (strncmp(argv[1],"l",1) == 0) - channel = LEFT; - else if (strncmp(argv[1],"r",1) == 0) - channel = RIGHT; - else - channel = LEFT_RIGHT; - break; - default: - return cmd_usage(cmdtp); - } - - if ((tmp = getenv ("volume")) != NULL) { - volume = simple_strtoul (tmp, NULL, 10); - } else { - volume = DEFAULT_VOL; - } - set_attenuation(volume); - - printf("Beep on "); - if (channel == LEFT) - printf ("left "); - else if (channel == RIGHT) - printf ("right "); - else - printf ("left and right "); - printf ("channel\n"); - - rcode = i2s_squarewave (DEFAULT_DURATION, DEFAULT_FREQ, channel); - - return rcode; -} -#endif - -#if defined(CONFIG_STK52XX) -void led_init(void) -{ - struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio *)MPC5XXX_GPIO; - struct mpc5xxx_gpt_0_7 *gpt = (struct mpc5xxx_gpt_0_7 *)MPC5XXX_GPT; - - /* configure PSC3 for SPI and GPIO */ - gpio->port_config &= ~(0x00000F00); - gpio->port_config |= 0x00000800; - - gpio->simple_gpioe &= ~(0x00000F00); - gpio->simple_gpioe |= 0x00000F00; - - gpio->simple_ddr &= ~(0x00000F00); - gpio->simple_ddr |= 0x00000F00; - - /* configure timer 4-7 for simple GPIO output */ - gpt->gpt4.emsr |= 0x00000024; - gpt->gpt5.emsr |= 0x00000024; - gpt->gpt6.emsr |= 0x00000024; - gpt->gpt7.emsr |= 0x00000024; - -#ifndef CONFIG_TQM5200S - /* enable SM501 GPIO control (in both power modes) */ - *(vu_long *) (SM501_MMIO_BASE+SM501_POWER_MODE0_GATE) |= - POWER_MODE_GATE_GPIO_PWM_I2C; - *(vu_long *) (SM501_MMIO_BASE+SM501_POWER_MODE1_GATE) |= - POWER_MODE_GATE_GPIO_PWM_I2C; - - /* configure SM501 gpio pins 24-27 as output */ - *(vu_long *) (SM501_MMIO_BASE+SM501_GPIO_CTRL_LOW) &= ~(0xF << 24); - *(vu_long *) (SM501_MMIO_BASE+SM501_GPIO_DATA_DIR_LOW) |= (0xF << 24); - - /* configure SM501 gpio pins 48-51 as output */ - *(vu_long *) (SM501_MMIO_BASE+SM501_GPIO_DATA_DIR_HIGH) |= (0xF << 16); -#endif /* !CONFIG_TQM5200S */ -} - -/* - * return 1 if led number unknown - * return 0 else - */ -int do_led(char * const argv[]) -{ - struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio *)MPC5XXX_GPIO; - struct mpc5xxx_gpt_0_7 *gpt = (struct mpc5xxx_gpt_0_7 *)MPC5XXX_GPT; - - switch (simple_strtoul(argv[2], NULL, 10)) { - - case 0: - if (strcmp (argv[3], "on") == 0) { - gpio->simple_dvo |= (1 << 8); - } else { - gpio->simple_dvo &= ~(1 << 8); - } - break; - - case 1: - if (strcmp (argv[3], "on") == 0) { - gpio->simple_dvo |= (1 << 9); - } else { - gpio->simple_dvo &= ~(1 << 9); - } - break; - - case 2: - if (strcmp (argv[3], "on") == 0) { - gpio->simple_dvo |= (1 << 10); - } else { - gpio->simple_dvo &= ~(1 << 10); - } - break; - - case 3: - if (strcmp (argv[3], "on") == 0) { - gpio->simple_dvo |= (1 << 11); - } else { - gpio->simple_dvo &= ~(1 << 11); - } - break; - - case 4: - if (strcmp (argv[3], "on") == 0) { - gpt->gpt4.emsr |= (1 << 4); - } else { - gpt->gpt4.emsr &= ~(1 << 4); - } - break; - - case 5: - if (strcmp (argv[3], "on") == 0) { - gpt->gpt5.emsr |= (1 << 4); - } else { - gpt->gpt5.emsr &= ~(1 << 4); - } - break; - - case 6: - if (strcmp (argv[3], "on") == 0) { - gpt->gpt6.emsr |= (1 << 4); - } else { - gpt->gpt6.emsr &= ~(1 << 4); - } - break; - - case 7: - if (strcmp (argv[3], "on") == 0) { - gpt->gpt7.emsr |= (1 << 4); - } else { - gpt->gpt7.emsr &= ~(1 << 4); - } - break; -#ifndef CONFIG_TQM5200S - case 24: - if (strcmp (argv[3], "on") == 0) { - *(vu_long *) (SM501_MMIO_BASE+SM501_GPIO_DATA_LOW) |= - (0x1 << 24); - } else { - *(vu_long *) (SM501_MMIO_BASE+SM501_GPIO_DATA_LOW) &= - ~(0x1 << 24); - } - break; - - case 25: - if (strcmp (argv[3], "on") == 0) { - *(vu_long *) (SM501_MMIO_BASE+SM501_GPIO_DATA_LOW) |= - (0x1 << 25); - } else { - *(vu_long *) (SM501_MMIO_BASE+SM501_GPIO_DATA_LOW) &= - ~(0x1 << 25); - } - break; - - case 26: - if (strcmp (argv[3], "on") == 0) { - *(vu_long *) (SM501_MMIO_BASE+SM501_GPIO_DATA_LOW) |= - (0x1 << 26); - } else { - *(vu_long *) (SM501_MMIO_BASE+SM501_GPIO_DATA_LOW) &= - ~(0x1 << 26); - } - break; - - case 27: - if (strcmp (argv[3], "on") == 0) { - *(vu_long *) (SM501_MMIO_BASE+SM501_GPIO_DATA_LOW) |= - (0x1 << 27); - } else { - *(vu_long *) (SM501_MMIO_BASE+SM501_GPIO_DATA_LOW) &= - ~(0x1 << 27); - } - break; - - case 48: - if (strcmp (argv[3], "on") == 0) { - *(vu_long *) (SM501_MMIO_BASE+SM501_GPIO_DATA_HIGH) |= - (0x1 << 16); - } else { - *(vu_long *) (SM501_MMIO_BASE+SM501_GPIO_DATA_HIGH) &= - ~(0x1 << 16); - } - break; - - case 49: - if (strcmp (argv[3], "on") == 0) { - *(vu_long *) (SM501_MMIO_BASE+SM501_GPIO_DATA_HIGH) |= - (0x1 << 17); - } else { - *(vu_long *) (SM501_MMIO_BASE+SM501_GPIO_DATA_HIGH) &= - ~(0x1 << 17); - } - break; - - case 50: - if (strcmp (argv[3], "on") == 0) { - *(vu_long *) (SM501_MMIO_BASE+SM501_GPIO_DATA_HIGH) |= - (0x1 << 18); - } else { - *(vu_long *) (SM501_MMIO_BASE+SM501_GPIO_DATA_HIGH) &= - ~(0x1 << 18); - } - break; - - case 51: - if (strcmp (argv[3], "on") == 0) { - *(vu_long *) (SM501_MMIO_BASE+SM501_GPIO_DATA_HIGH) |= - (0x1 << 19); - } else { - *(vu_long *) (SM501_MMIO_BASE+SM501_GPIO_DATA_HIGH) &= - ~(0x1 << 19); - } - break; -#endif /* !CONFIG_TQM5200S */ - default: - printf ("%s: invalid led number %s\n", __FUNCTION__, argv[2]); - return 1; - } - - return 0; -} -#endif - -#if defined(CONFIG_STK52XX) || defined(CONFIG_FO300) -/* - * return 1 on CAN initialization failure - * return 0 if no failure - */ -int can_init(void) -{ - static int init_done = 0; - int i; - struct mpc5xxx_mscan *can1 = - (struct mpc5xxx_mscan *)(CONFIG_SYS_MBAR + 0x0900); - struct mpc5xxx_mscan *can2 = - (struct mpc5xxx_mscan *)(CONFIG_SYS_MBAR + 0x0980); - - /* GPIO configuration of the CAN pins is done in TQM5200.h */ - - if (!init_done) { - /* init CAN 1 */ - can1->canctl1 |= 0x80; /* CAN enable */ - udelay(100); - - i = 0; - can1->canctl0 |= 0x02; /* sleep mode */ - /* wait until sleep mode reached */ - while (!(can1->canctl1 & 0x02)) { - udelay(10); - i++; - if (i == 10) { - printf ("%s: CAN1 initialize error, " - "can not enter sleep mode!\n", - __FUNCTION__); - return 1; - } - } - i = 0; - can1->canctl0 = 0x01; /* enter init mode */ - /* wait until init mode reached */ - while (!(can1->canctl1 & 0x01)) { - udelay(10); - i++; - if (i == 10) { - printf ("%s: CAN1 initialize error, " - "can not enter init mode!\n", - __FUNCTION__); - return 1; - } - } - can1->canctl1 = 0x80; - can1->canctl1 |= 0x40; - can1->canbtr0 = 0x0F; - can1->canbtr1 = 0x7F; - can1->canidac &= ~(0x30); - can1->canidar1 = 0x00; - can1->canidar3 = 0x00; - can1->canidar5 = 0x00; - can1->canidar7 = 0x00; - can1->canidmr0 = 0xFF; - can1->canidmr1 = 0xFF; - can1->canidmr2 = 0xFF; - can1->canidmr3 = 0xFF; - can1->canidmr4 = 0xFF; - can1->canidmr5 = 0xFF; - can1->canidmr6 = 0xFF; - can1->canidmr7 = 0xFF; - - i = 0; - can1->canctl0 &= ~(0x01); /* leave init mode */ - can1->canctl0 &= ~(0x02); - /* wait until init and sleep mode left */ - while ((can1->canctl1 & 0x01) || (can1->canctl1 & 0x02)) { - udelay(10); - i++; - if (i == 10) { - printf ("%s: CAN1 initialize error, " - "can not leave init/sleep mode!\n", - __FUNCTION__); - return 1; - } - } - - /* init CAN 2 */ - can2->canctl1 |= 0x80; /* CAN enable */ - udelay(100); - - i = 0; - can2->canctl0 |= 0x02; /* sleep mode */ - /* wait until sleep mode reached */ - while (!(can2->canctl1 & 0x02)) { - udelay(10); - i++; - if (i == 10) { - printf ("%s: CAN2 initialize error, " - "can not enter sleep mode!\n", - __FUNCTION__); - return 1; - } - } - i = 0; - can2->canctl0 = 0x01; /* enter init mode */ - /* wait until init mode reached */ - while (!(can2->canctl1 & 0x01)) { - udelay(10); - i++; - if (i == 10) { - printf ("%s: CAN2 initialize error, " - "can not enter init mode!\n", - __FUNCTION__); - return 1; - } - } - can2->canctl1 = 0x80; - can2->canctl1 |= 0x40; - can2->canbtr0 = 0x0F; - can2->canbtr1 = 0x7F; - can2->canidac &= ~(0x30); - can2->canidar1 = 0x00; - can2->canidar3 = 0x00; - can2->canidar5 = 0x00; - can2->canidar7 = 0x00; - can2->canidmr0 = 0xFF; - can2->canidmr1 = 0xFF; - can2->canidmr2 = 0xFF; - can2->canidmr3 = 0xFF; - can2->canidmr4 = 0xFF; - can2->canidmr5 = 0xFF; - can2->canidmr6 = 0xFF; - can2->canidmr7 = 0xFF; - can2->canctl0 &= ~(0x01); /* leave init mode */ - can2->canctl0 &= ~(0x02); - - i = 0; - /* wait until init mode left */ - while ((can2->canctl1 & 0x01) || (can2->canctl1 & 0x02)) { - udelay(10); - i++; - if (i == 10) { - printf ("%s: CAN2 initialize error, " - "can not leave init/sleep mode!\n", - __FUNCTION__); - return 1; - } - } - init_done = 1; - } - return 0; -} - -/* - * return 1 on CAN failure - * return 0 if no failure - */ -int do_can(char * const argv[]) -{ - int i; - struct mpc5xxx_mscan *can1 = - (struct mpc5xxx_mscan *)(CONFIG_SYS_MBAR + 0x0900); - struct mpc5xxx_mscan *can2 = - (struct mpc5xxx_mscan *)(CONFIG_SYS_MBAR + 0x0980); - - /* send a message on CAN1 */ - can1->cantbsel = 0x01; - can1->cantxfg.idr[0] = 0x55; - can1->cantxfg.idr[1] = 0x00; - can1->cantxfg.idr[1] &= ~0x8; - can1->cantxfg.idr[1] &= ~0x10; - can1->cantxfg.dsr[0] = 0xCC; - can1->cantxfg.dlr = 1; - can1->cantxfg.tbpr = 0; - can1->cantflg = 0x01; - - i = 0; - while ((can1->cantflg & 0x01) == 0) { - i++; - if (i == 10) { - printf ("%s: CAN1 send timeout, " - "can not send message!\n", - __FUNCTION__); - return 1; - } - udelay(1000); - } - udelay(1000); - - i = 0; - while (!(can2->canrflg & 0x01)) { - i++; - if (i == 10) { - printf ("%s: CAN2 receive timeout, " - "no message received!\n", - __FUNCTION__); - return 1; - } - udelay(1000); - } - - if (can2->canrxfg.dsr[0] != 0xCC) { - printf ("%s: CAN2 receive error, " - "data mismatch!\n", - __FUNCTION__); - return 1; - } - - /* send a message on CAN2 */ - can2->cantbsel = 0x01; - can2->cantxfg.idr[0] = 0x55; - can2->cantxfg.idr[1] = 0x00; - can2->cantxfg.idr[1] &= ~0x8; - can2->cantxfg.idr[1] &= ~0x10; - can2->cantxfg.dsr[0] = 0xCC; - can2->cantxfg.dlr = 1; - can2->cantxfg.tbpr = 0; - can2->cantflg = 0x01; - - i = 0; - while ((can2->cantflg & 0x01) == 0) { - i++; - if (i == 10) { - printf ("%s: CAN2 send error, " - "can not send message!\n", - __FUNCTION__); - return 1; - } - udelay(1000); - } - udelay(1000); - - i = 0; - while (!(can1->canrflg & 0x01)) { - i++; - if (i == 10) { - printf ("%s: CAN1 receive timeout, " - "no message received!\n", - __FUNCTION__); - return 1; - } - udelay(1000); - } - - if (can1->canrxfg.dsr[0] != 0xCC) { - printf ("%s: CAN1 receive error 0x%02x\n", - __FUNCTION__, (can1->canrxfg.dsr[0])); - return 1; - } - - return 0; -} - -/* - * return 1 if rs232 port unknown - * return 2 on txd/rxd failure (only rs232 2) - * return 3 on rts/cts failure - * return 0 if no failure - */ -int do_rs232(char * const argv[]) -{ - int error_status = 0; - struct mpc5xxx_gpio *gpio = (struct mpc5xxx_gpio *)MPC5XXX_GPIO; - struct mpc5xxx_psc *psc1 = (struct mpc5xxx_psc *)MPC5XXX_PSC1; - - switch (simple_strtoul(argv[2], NULL, 10)) { - - case 1: - /* check RTS <-> CTS loop */ - /* set rts to 0 */ - psc1->op1 |= 0x01; - - /* wait some time before requesting status */ - udelay(10); - - /* check status at cts */ - if ((psc1->ip & 0x01) != 0) { - error_status = 3; - printf ("%s: failure at rs232_1, cts status is %d " - "(should be 0)\n", - __FUNCTION__, (psc1->ip & 0x01)); - } - - /* set rts to 1 */ - psc1->op0 |= 0x01; - - /* wait some time before requesting status */ - udelay(10); - - /* check status at cts */ - if ((psc1->ip & 0x01) != 1) { - error_status = 3; - printf ("%s: failure at rs232_1, cts status is %d " - "(should be 1)\n", - __FUNCTION__, (psc1->ip & 0x01)); - } - - break; - - case 2: - /* set PSC3_0, PSC3_2 as output and PSC3_1, PSC3_3 as input */ - gpio->simple_ddr &= ~(0x00000F00); - gpio->simple_ddr |= 0x00000500; - - /* check TXD <-> RXD loop */ - /* set TXD to 1 */ - gpio->simple_dvo |= (1 << 8); - - /* wait some time before requesting status */ - udelay(10); - - if ((gpio->simple_ival & 0x00000200) != 0x00000200) { - error_status = 2; - printf ("%s: failure at rs232_2, rxd status is %d " - "(should be 1)\n", - __FUNCTION__, - (gpio->simple_ival & 0x00000200) >> 9); - } - - /* set TXD to 0 */ - gpio->simple_dvo &= ~(1 << 8); - - /* wait some time before requesting status */ - udelay(10); - - if ((gpio->simple_ival & 0x00000200) != 0x00000000) { - error_status = 2; - printf ("%s: failure at rs232_2, rxd status is %d " - "(should be 0)\n", - __FUNCTION__, - (gpio->simple_ival & 0x00000200) >> 9); - } - - /* check RTS <-> CTS loop */ - /* set RTS to 1 */ - gpio->simple_dvo |= (1 << 10); - - /* wait some time before requesting status */ - udelay(10); - - if ((gpio->simple_ival & 0x00000800) != 0x00000800) { - error_status = 3; - printf ("%s: failure at rs232_2, cts status is %d " - "(should be 1)\n", - __FUNCTION__, - (gpio->simple_ival & 0x00000800) >> 11); - } - - /* set RTS to 0 */ - gpio->simple_dvo &= ~(1 << 10); - - /* wait some time before requesting status */ - udelay(10); - - if ((gpio->simple_ival & 0x00000800) != 0x00000000) { - error_status = 3; - printf ("%s: failure at rs232_2, cts status is %d " - "(should be 0)\n", - __FUNCTION__, - (gpio->simple_ival & 0x00000800) >> 11); - } - - /* set PSC3_0, PSC3_1, PSC3_2 and PSC3_3 as output */ - gpio->simple_ddr &= ~(0x00000F00); - gpio->simple_ddr |= 0x00000F00; - break; - - default: - printf ("%s: invalid rs232 number %s\n", __FUNCTION__, argv[2]); - error_status = 1; - break; - } - - return error_status; -} - -#if !defined(CONFIG_FO300) && !defined(CONFIG_TQM5200S) -static void sm501_backlight (unsigned int state) -{ - if (state == BL_ON) { - *(vu_long *)(SM501_MMIO_BASE+SM501_PANEL_DISPLAY_CONTROL) |= - (1 << 26) | (1 << 27); - } else if (state == BL_OFF) - *(vu_long *)(SM501_MMIO_BASE+SM501_PANEL_DISPLAY_CONTROL) &= - ~((1 << 26) | (1 << 27)); -} -#endif /* !CONFIG_FO300 & !CONFIG_TQM5200S */ - -int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - int rcode; - -#ifdef CONFIG_STK52XX_REV100 - printf ("Revision 100 of STK52XX not supported!\n"); - return 1; -#endif -#if defined(CONFIG_STK52XX) - led_init(); -#endif - can_init(); - - switch (argc) { - - case 0: - case 1: - break; - - case 2: - if (strncmp (argv[1], "can", 3) == 0) { - rcode = do_can (argv); - if (rcode == 0) - printf ("OK\n"); - else - printf ("Error\n"); - return rcode; - } - break; - - case 3: - if (strncmp (argv[1], "rs232", 3) == 0) { - rcode = do_rs232 (argv); - if (rcode == 0) - printf ("OK\n"); - else - printf ("Error\n"); - return rcode; -#if !defined(CONFIG_FO300) && !defined(CONFIG_TQM5200S) - } else if (strncmp (argv[1], "backlight", 4) == 0) { - if (strncmp (argv[2], "on", 2) == 0) { - sm501_backlight (BL_ON); - return 0; - } - else if (strncmp (argv[2], "off", 3) == 0) { - sm501_backlight (BL_OFF); - return 0; - } -#endif /* !CONFIG_FO300 & !CONFIG_TQM5200S */ - } - break; - -#if defined(CONFIG_STK52XX) - case 4: - if (strcmp (argv[1], "led") == 0) { - return (do_led (argv)); - } - break; -#endif - - default: - break; - } - - printf ("Usage:\nfkt cmd [arg1] [arg2] ...\n"); - return 1; -} - - -U_BOOT_CMD( - sound , 5, 1, cmd_sound, - "Sound sub-system", - "saw [duration] [freq] [channel]\n" - " - generate sawtooth for 'duration' ms with frequency 'freq'\n" - " on left "l" or right "r" channel\n" - "sound square [duration] [freq] [channel]\n" - " - generate squarewave for 'duration' ms with frequency 'freq'\n" - " on left "l" or right "r" channel\n" - "pcm1772 reg val" -); - -U_BOOT_CMD( - wav , 3, 1, cmd_wav, - "play wav file", - "[addr] [bytes]\n" - " - play wav file at address 'addr' with length 'bytes'" -); - -U_BOOT_CMD( - beep , 2, 1, cmd_beep, - "play short beep", - "[channel]\n" - " - play short beep on "l"eft or "r"ight channel" -); -#endif /* CONFIG_STK52XX || CONFIG_FO300 */ - -#if defined(CONFIG_STK52XX) -U_BOOT_CMD( - fkt , 4, 1, cmd_fkt, - "Function test routines", - "led number on/off\n" - " - 'number's like printed on STK52XX board\n" - "fkt can\n" - " - loopback plug for X83 required\n" - "fkt rs232 number\n" - " - loopback plug(s) for X2 required" -#ifndef CONFIG_TQM5200S - "\n" - "fkt backlight on/off\n" - " - switch backlight on or off" -#endif /* !CONFIG_TQM5200S */ -); -#elif defined(CONFIG_FO300) -U_BOOT_CMD( - fkt , 3, 1, cmd_fkt, - "Function test routines", - "fkt can\n" - " - loopback plug for X16/X29 required\n" - "fkt rs232 number\n" - " - loopback plug(s) for X21/X22 required" -); -#endif -#endif diff --git a/board/tqc/tqm5200/mt48lc16m16a2-75.h b/board/tqc/tqm5200/mt48lc16m16a2-75.h deleted file mode 100644 index 3d9979664f..0000000000 --- a/board/tqc/tqm5200/mt48lc16m16a2-75.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * (C) Copyright 2004 - * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#define SDRAM_DDR 0 /* is SDR */ - -/* Settings for XLB = 132 MHz */ -#define SDRAM_MODE 0x00CD0000 -/* #define SDRAM_MODE 0x008D0000 */ /* CAS latency 2 */ -#define SDRAM_CONTROL 0x504F0000 -#define SDRAM_CONFIG1 0xD2322800 -/* #define SDRAM_CONFIG1 0xD2222800 */ /* CAS latency 2 */ -/*#define SDRAM_CONFIG1 0xD7322800 */ /* SDRAM controller bug workaround */ -#define SDRAM_CONFIG2 0x8AD70000 -/*#define SDRAM_CONFIG2 0xDDD70000 */ /* SDRAM controller bug workaround */ diff --git a/board/tqc/tqm5200/tqm5200.c b/board/tqc/tqm5200/tqm5200.c deleted file mode 100644 index cb99afdb90..0000000000 --- a/board/tqc/tqm5200/tqm5200.c +++ /dev/null @@ -1,875 +0,0 @@ -/* - * (C) Copyright 2003-2006 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * (C) Copyright 2004 - * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com. - * - * (C) Copyright 2004-2006 - * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <console.h> -#include <mpc5xxx.h> -#include <pci.h> -#include <asm/processor.h> -#include <libfdt.h> -#include <netdev.h> -#include <video.h> - -#ifdef CONFIG_VIDEO_SM501 -#include <sm501.h> -#endif - -#if defined(CONFIG_MPC5200_DDR) -#include "mt46v16m16-75.h" -#else -#include "mt48lc16m16a2-75.h" -#endif - -#ifdef CONFIG_OF_LIBFDT -#include <fdt_support.h> -#endif /* CONFIG_OF_LIBFDT */ - -DECLARE_GLOBAL_DATA_PTR; - -#ifdef CONFIG_PS2MULT -void ps2mult_early_init(void); -#endif - -#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) && \ - defined(CONFIG_VIDEO) -/* - * EDID block has been generated using Phoenix EDID Designer 1.3. - * This tool creates a text file containing: - * - * EDID BYTES: - * - * 0x 00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F - * ------------------------------------------------ - * 00 | 00 FF FF FF FF FF FF 00 04 21 00 00 00 00 00 00 - * 10 | 01 00 01 03 00 00 00 00 00 00 00 00 00 00 00 00 - * 20 | 00 00 00 21 00 00 01 01 01 01 01 01 01 01 01 01 - * 30 | 01 01 01 01 01 01 64 00 00 00 00 00 00 00 00 00 - * 40 | 00 00 00 00 00 00 00 00 00 00 00 10 00 00 00 00 - * 50 | 00 00 00 00 00 00 00 00 00 00 00 00 00 10 00 00 - * 60 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 10 - * 70 | 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 17 - * - * Then this data has been manually converted to the char - * array below. - */ -static unsigned char edid_buf[128] = { - 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x00, - 0x04, 0x21, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x01, 0x00, 0x01, 0x03, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x21, 0x00, 0x00, 0x01, 0x01, - 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, - 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x64, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, - 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x17, -}; -#endif - -#ifndef CONFIG_SYS_RAMBOOT -static void sdram_start (int hi_addr) -{ - long hi_addr_bit = hi_addr ? 0x01000000 : 0; - - /* unlock mode register */ - *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000000 | - hi_addr_bit; - __asm__ volatile ("sync"); - - /* precharge all banks */ - *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | - hi_addr_bit; - __asm__ volatile ("sync"); - -#if SDRAM_DDR - /* set mode register: extended mode */ - *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_EMODE; - __asm__ volatile ("sync"); - - /* set mode register: reset DLL */ - *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE | 0x04000000; - __asm__ volatile ("sync"); -#endif - - /* precharge all banks */ - *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | - hi_addr_bit; - __asm__ volatile ("sync"); - - /* auto refresh */ - *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 | - hi_addr_bit; - __asm__ volatile ("sync"); - - /* set mode register */ - *(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE; - __asm__ volatile ("sync"); - - /* normal operation */ - *(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit; - __asm__ volatile ("sync"); -} -#endif - -/* - * ATTENTION: Although partially referenced dram_init does NOT make real use - * use of CONFIG_SYS_SDRAM_BASE. The code does not work if CONFIG_SYS_SDRAM_BASE - * is something else than 0x00000000. - */ - -int dram_init(void) -{ - ulong dramsize = 0; - ulong dramsize2 = 0; - uint svr, pvr; - -#ifndef CONFIG_SYS_RAMBOOT - ulong test1, test2; - - /* setup SDRAM chip selects */ - *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001c; /* 512MB at 0x0 */ - *(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x40000000; /* disabled */ - __asm__ volatile ("sync"); - - /* setup config registers */ - *(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1; - *(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2; - __asm__ volatile ("sync"); - -#if SDRAM_DDR - /* set tap delay */ - *(vu_long *)MPC5XXX_CDM_PORCFG = SDRAM_TAPDELAY; - __asm__ volatile ("sync"); -#endif - - /* find RAM size using SDRAM CS0 only */ - sdram_start(0); - test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x20000000); - sdram_start(1); - test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x20000000); - if (test1 > test2) { - sdram_start(0); - dramsize = test1; - } else { - dramsize = test2; - } - - /* memory smaller than 1MB is impossible */ - if (dramsize < (1 << 20)) { - dramsize = 0; - } - - /* set SDRAM CS0 size according to the amount of RAM found */ - if (dramsize > 0) { - *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 + - __builtin_ffs(dramsize >> 20) - 1; - } else { - *(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */ - } - - /* let SDRAM CS1 start right after CS0 */ - *(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize + 0x0000001c; /* 512MB */ - - /* find RAM size using SDRAM CS1 only */ - if (!dramsize) - sdram_start(0); - test2 = test1 = get_ram_size((long *)(CONFIG_SYS_SDRAM_BASE + dramsize), 0x20000000); - if (!dramsize) { - sdram_start(1); - test2 = get_ram_size((long *)(CONFIG_SYS_SDRAM_BASE + dramsize), 0x20000000); - } - if (test1 > test2) { - sdram_start(0); - dramsize2 = test1; - } else { - dramsize2 = test2; - } - - /* memory smaller than 1MB is impossible */ - if (dramsize2 < (1 << 20)) { - dramsize2 = 0; - } - - /* set SDRAM CS1 size according to the amount of RAM found */ - if (dramsize2 > 0) { - *(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize - | (0x13 + __builtin_ffs(dramsize2 >> 20) - 1); - } else { - *(vu_long *)MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */ - } - -#else /* CONFIG_SYS_RAMBOOT */ - - /* retrieve size of memory connected to SDRAM CS0 */ - dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF; - if (dramsize >= 0x13) { - dramsize = (1 << (dramsize - 0x13)) << 20; - } else { - dramsize = 0; - } - - /* retrieve size of memory connected to SDRAM CS1 */ - dramsize2 = *(vu_long *)MPC5XXX_SDRAM_CS1CFG & 0xFF; - if (dramsize2 >= 0x13) { - dramsize2 = (1 << (dramsize2 - 0x13)) << 20; - } else { - dramsize2 = 0; - } -#endif /* CONFIG_SYS_RAMBOOT */ - - /* - * On MPC5200B we need to set the special configuration delay in the - * DDR controller. Please refer to Freescale's AN3221 "MPC5200B SDRAM - * Initialization and Configuration", 3.3.1 SDelay--MBAR + 0x0190: - * - * "The SDelay should be written to a value of 0x00000004. It is - * required to account for changes caused by normal wafer processing - * parameters." - */ - svr = get_svr(); - pvr = get_pvr(); - if ((SVR_MJREV(svr) >= 2) && - (PVR_MAJ(pvr) == 1) && (PVR_MIN(pvr) == 4)) { - - *(vu_long *)MPC5XXX_SDRAM_SDELAY = 0x04; - __asm__ volatile ("sync"); - } - -#if defined(CONFIG_TQM5200_B) - gd->ram_size = dramsize + dramsize2; -#else - gd->ram_size = dramsize; -#endif /* CONFIG_TQM5200_B */ - - return 0; -} - -int checkboard (void) -{ -#if defined(CONFIG_TQM5200S) -# define MODULE_NAME "TQM5200S" -#else -# define MODULE_NAME "TQM5200" -#endif - -#if defined(CONFIG_STK52XX) -# define CARRIER_NAME "STK52xx" -#elif defined(CONFIG_CAM5200) -# define CARRIER_NAME "CAM5200" -#elif defined(CONFIG_FO300) -# define CARRIER_NAME "FO300" -#elif defined(CONFIG_CHARON) -# define CARRIER_NAME "CHARON" -#else -# error "UNKNOWN" -#endif - - puts ( "Board: " MODULE_NAME " (TQ-Components GmbH)\n" - " on a " CARRIER_NAME " carrier board\n"); - - return 0; -} - -#undef MODULE_NAME -#undef CARRIER_NAME - -void flash_preinit(void) -{ - /* - * Now, when we are in RAM, enable flash write - * access for detection process. - * Note that CS_BOOT cannot be cleared when - * executing in flash. - */ - *(vu_long *)MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */ -} - - -#ifdef CONFIG_PCI -static struct pci_controller hose; - -extern void pci_mpc5xxx_init(struct pci_controller *); - -void pci_init_board(void) -{ - pci_mpc5xxx_init(&hose); -} -#endif - -#if defined(CONFIG_IDE) && defined(CONFIG_IDE_RESET) - -#if defined (CONFIG_MINIFAP) -#define SM501_POWER_MODE0_GATE 0x00000040UL -#define SM501_POWER_MODE1_GATE 0x00000048UL -#define POWER_MODE_GATE_GPIO_PWM_I2C 0x00000040UL -#define SM501_GPIO_DATA_DIR_HIGH 0x0001000CUL -#define SM501_GPIO_DATA_HIGH 0x00010004UL -#define SM501_GPIO_51 0x00080000UL -#endif /* CONFIG MINIFAP */ - -void init_ide_reset (void) -{ - debug ("init_ide_reset\n"); - -#if defined (CONFIG_MINIFAP) - /* Configure GPIO_51 of the SM501 grafic controller as ATA reset */ - - /* enable GPIO control (in both power modes) */ - *(vu_long *) (SM501_MMIO_BASE+SM501_POWER_MODE0_GATE) |= - POWER_MODE_GATE_GPIO_PWM_I2C; - *(vu_long *) (SM501_MMIO_BASE+SM501_POWER_MODE1_GATE) |= - POWER_MODE_GATE_GPIO_PWM_I2C; - /* configure GPIO51 as output */ - *(vu_long *) (SM501_MMIO_BASE+SM501_GPIO_DATA_DIR_HIGH) |= - SM501_GPIO_51; -#else - /* Configure PSC1_4 as GPIO output for ATA reset */ - *(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC1_4; - *(vu_long *) MPC5XXX_WU_GPIO_DIR |= GPIO_PSC1_4; - - /* by default the ATA reset is de-asserted */ - *(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_PSC1_4; -#endif -} - -void ide_set_reset (int idereset) -{ - debug ("ide_reset(%d)\n", idereset); - -#if defined (CONFIG_MINIFAP) - if (idereset) { - *(vu_long *) (SM501_MMIO_BASE+SM501_GPIO_DATA_HIGH) &= - ~SM501_GPIO_51; - } else { - *(vu_long *) (SM501_MMIO_BASE+SM501_GPIO_DATA_HIGH) |= - SM501_GPIO_51; - } -#else - if (idereset) { - *(vu_long *) MPC5XXX_WU_GPIO_DATA_O &= ~GPIO_PSC1_4; - } else { - *(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_PSC1_4; - } -#endif -} -#endif - -#ifdef CONFIG_POST -/* - * Reads GPIO pin PSC6_3. A keypress is reported, if PSC6_3 is low. If PSC6_3 - * is left open, no keypress is detected. - */ -int post_hotkeys_pressed(void) -{ -#ifdef CONFIG_STK52XX - struct mpc5xxx_gpio *gpio; - - gpio = (struct mpc5xxx_gpio*) MPC5XXX_GPIO; - - /* - * Configure PSC6_0 through PSC6_3 as GPIO. - */ - gpio->port_config &= ~(0x00700000); - - /* Enable GPIO for GPIO_IRDA_1 (IR_USB_CLK pin) = PSC6_3 */ - gpio->simple_gpioe |= 0x20000000; - - /* Configure GPIO_IRDA_1 as input */ - gpio->simple_ddr &= ~(0x20000000); - - return ((gpio->simple_ival & 0x20000000) ? 0 : 1); -#else - return 0; -#endif -} -#endif - -#ifdef CONFIG_BOARD_EARLY_INIT_R -int board_early_init_r (void) -{ - - extern int usb_cpu_init(void); - -#ifdef CONFIG_PS2MULT - ps2mult_early_init(); -#endif /* CONFIG_PS2MULT */ - -#if defined(CONFIG_USB_OHCI_NEW) && defined(CONFIG_SYS_USB_OHCI_CPU_INIT) - /* Low level USB init, required for proper kernel operation */ - usb_cpu_init(); -#endif - - return (0); -} -#endif - -#ifdef CONFIG_FO300 -int silent_boot (void) -{ - vu_long timer3_status; - - /* Configure GPT3 as GPIO input */ - *(vu_long *)MPC5XXX_GPT3_ENABLE = 0x00000004; - - /* Read in TIMER_3 pin status */ - timer3_status = *(vu_long *)MPC5XXX_GPT3_STATUS; - -#ifdef FO300_SILENT_CONSOLE_WHEN_S1_CLOSED - /* Force silent console mode if S1 switch - * is in closed position (TIMER_3 pin status is LOW). */ - if (MPC5XXX_GPT_GPIO_PIN(timer3_status) == 0) - return 1; -#else - /* Force silent console mode if S1 switch - * is in open position (TIMER_3 pin status is HIGH). */ - if (MPC5XXX_GPT_GPIO_PIN(timer3_status) == 1) - return 1; -#endif - - return 0; -} - -int board_early_init_f (void) -{ - if (silent_boot()) - gd->flags |= GD_FLG_SILENT; - - return 0; -} -#endif /* CONFIG_FO300 */ - -#if defined(CONFIG_CHARON) -#include <i2c.h> -#include <asm/io.h> - -/* The TFP410 registers */ -#define TFP410_REG_VEN_ID_L 0x00 -#define TFP410_REG_VEN_ID_H 0x01 -#define TFP410_REG_DEV_ID_L 0x02 -#define TFP410_REG_DEV_ID_H 0x03 -#define TFP410_REG_REV_ID 0x04 - -#define TFP410_REG_CTL_1_MODE 0x08 -#define TFP410_REG_CTL_2_MODE 0x09 -#define TFP410_REG_CTL_3_MODE 0x0A - -#define TFP410_REG_CFG 0x0B - -#define TFP410_REG_DE_DLY 0x32 -#define TFP410_REG_DE_CTL 0x33 -#define TFP410_REG_DE_TOP 0x34 -#define TFP410_REG_DE_CNT_L 0x36 -#define TFP410_REG_DE_CNT_H 0x37 -#define TFP410_REG_DE_LIN_L 0x38 -#define TFP410_REG_DE_LIN_H 0x39 - -#define TFP410_REG_H_RES_L 0x3A -#define TFP410_REG_H_RES_H 0x3B -#define TFP410_REG_V_RES_L 0x3C -#define TFP410_REG_V_RES_H 0x3D - -static int tfp410_read_reg(int reg, uchar *buf) -{ - puts("Error reading the chip.\n"); - return -ENOSYS; -} - -static int tfp410_write_reg(int reg, uchar buf) -{ - puts("Error writing the chip.\n"); - return -ENOSYS; -} - -typedef struct _tfp410_config { - int reg; - uchar val; -}TFP410_CONFIG; - -static TFP410_CONFIG tfp410_configtbl[] = { - {TFP410_REG_CTL_1_MODE, 0x37}, - {TFP410_REG_CTL_2_MODE, 0x20}, - {TFP410_REG_CTL_3_MODE, 0x80}, - {TFP410_REG_DE_DLY, 0x90}, - {TFP410_REG_DE_CTL, 0x00}, - {TFP410_REG_DE_TOP, 0x23}, - {TFP410_REG_DE_CNT_H, 0x02}, - {TFP410_REG_DE_CNT_L, 0x80}, - {TFP410_REG_DE_LIN_H, 0x01}, - {TFP410_REG_DE_LIN_L, 0xe0}, - {-1, 0}, -}; - -static int charon_last_stage_init(void) -{ - volatile struct mpc5xxx_lpb *lpb = - (struct mpc5xxx_lpb *) MPC5XXX_LPB; - uchar buf; - int i = 0; - - /* check version */ - if (tfp410_read_reg(TFP410_REG_DEV_ID_H, &buf) != 0) - return -1; - if (!(buf & 0x04)) - return -1; - if (tfp410_read_reg(TFP410_REG_DEV_ID_L, &buf) != 0) - return -1; - if (!(buf & 0x10)) - return -1; - /* OK, now init the chip */ - while (tfp410_configtbl[i].reg != -1) { - int ret; - - ret = tfp410_write_reg(tfp410_configtbl[i].reg, - tfp410_configtbl[i].val); - if (ret != 0) - return -1; - i++; - } - printf("TFP410 initialized.\n"); - - /* set deadcycle for cs3 to 0 */ - setbits_be32(&lpb->cs_deadcycle, 0xffffcfff); - return 0; -} -#endif - -int last_stage_init (void) -{ - /* - * auto scan for really existing devices and re-set chip select - * configuration. - */ - u16 save, tmp; - int restore; - - /* - * Check for SRAM and SRAM size - */ - - /* save original SRAM content */ - save = *(volatile u16 *)CONFIG_SYS_CS2_START; - restore = 1; - - /* write test pattern to SRAM */ - *(volatile u16 *)CONFIG_SYS_CS2_START = 0xA5A5; - __asm__ volatile ("sync"); - /* - * Put a different pattern on the data lines: otherwise they may float - * long enough to read back what we wrote. - */ - tmp = *(volatile u16 *)CONFIG_SYS_FLASH_BASE; - if (tmp == 0xA5A5) - puts ("!! possible error in SRAM detection\n"); - - if (*(volatile u16 *)CONFIG_SYS_CS2_START != 0xA5A5) { - /* no SRAM at all, disable cs */ - *(vu_long *)MPC5XXX_ADDECR &= ~(1 << 18); - *(vu_long *)MPC5XXX_CS2_START = 0x0000FFFF; - *(vu_long *)MPC5XXX_CS2_STOP = 0x0000FFFF; - restore = 0; - __asm__ volatile ("sync"); - } else if (*(volatile u16 *)(CONFIG_SYS_CS2_START + (1<<19)) == 0xA5A5) { - /* make sure that we access a mirrored address */ - *(volatile u16 *)CONFIG_SYS_CS2_START = 0x1111; - __asm__ volatile ("sync"); - if (*(volatile u16 *)(CONFIG_SYS_CS2_START + (1<<19)) == 0x1111) { - /* SRAM size = 512 kByte */ - *(vu_long *)MPC5XXX_CS2_STOP = STOP_REG(CONFIG_SYS_CS2_START, - 0x80000); - __asm__ volatile ("sync"); - puts ("SRAM: 512 kB\n"); - } - else - puts ("!! possible error in SRAM detection\n"); - } else { - puts ("SRAM: 1 MB\n"); - } - /* restore origianl SRAM content */ - if (restore) { - *(volatile u16 *)CONFIG_SYS_CS2_START = save; - __asm__ volatile ("sync"); - } - -#ifndef CONFIG_TQM5200S /* The TQM5200S has no SM501 grafic controller */ - /* - * Check for Grafic Controller - */ - - /* save origianl FB content */ - save = *(volatile u16 *)CONFIG_SYS_CS1_START; - restore = 1; - - /* write test pattern to FB memory */ - *(volatile u16 *)CONFIG_SYS_CS1_START = 0xA5A5; - __asm__ volatile ("sync"); - /* - * Put a different pattern on the data lines: otherwise they may float - * long enough to read back what we wrote. - */ - tmp = *(volatile u16 *)CONFIG_SYS_FLASH_BASE; - if (tmp == 0xA5A5) - puts ("!! possible error in grafic controller detection\n"); - - if (*(volatile u16 *)CONFIG_SYS_CS1_START != 0xA5A5) { - /* no grafic controller at all, disable cs */ - *(vu_long *)MPC5XXX_ADDECR &= ~(1 << 17); - *(vu_long *)MPC5XXX_CS1_START = 0x0000FFFF; - *(vu_long *)MPC5XXX_CS1_STOP = 0x0000FFFF; - restore = 0; - __asm__ volatile ("sync"); - } else { - puts ("VGA: SMI501 (Voyager) with 8 MB\n"); - } - /* restore origianl FB content */ - if (restore) { - *(volatile u16 *)CONFIG_SYS_CS1_START = save; - __asm__ volatile ("sync"); - } - -#ifdef CONFIG_FO300 - if (silent_boot()) { - setenv("bootdelay", "0"); - disable_ctrlc(1); - } -#endif -#endif /* !CONFIG_TQM5200S */ - -#if defined(CONFIG_CHARON) - charon_last_stage_init(); -#endif - return 0; -} - -#ifdef CONFIG_VIDEO_SM501 - -#ifdef CONFIG_FO300 -#define DISPLAY_WIDTH 800 -#else -#define DISPLAY_WIDTH 640 -#endif -#define DISPLAY_HEIGHT 480 - -#ifdef CONFIG_VIDEO_SM501_8BPP -#error CONFIG_VIDEO_SM501_8BPP not supported. -#endif /* CONFIG_VIDEO_SM501_8BPP */ - -#ifdef CONFIG_VIDEO_SM501_16BPP -#error CONFIG_VIDEO_SM501_16BPP not supported. -#endif /* CONFIG_VIDEO_SM501_16BPP */ -#ifdef CONFIG_VIDEO_SM501_32BPP -static const SMI_REGS init_regs [] = -{ -#if 0 /* CRT only */ - {0x00004, 0x0}, - {0x00048, 0x00021807}, - {0x0004C, 0x10090a01}, - {0x00054, 0x1}, - {0x00040, 0x00021807}, - {0x00044, 0x10090a01}, - {0x00054, 0x0}, - {0x80200, 0x00010000}, - {0x80204, 0x0}, - {0x80208, 0x0A000A00}, - {0x8020C, 0x02fa027f}, - {0x80210, 0x004a028b}, - {0x80214, 0x020c01df}, - {0x80218, 0x000201e9}, - {0x80200, 0x00013306}, -#else /* panel + CRT */ -#ifdef CONFIG_FO300 - {0x00004, 0x0}, - {0x00048, 0x00021807}, - {0x0004C, 0x301a0a01}, - {0x00054, 0x1}, - {0x00040, 0x00021807}, - {0x00044, 0x091a0a01}, - {0x00054, 0x0}, - {0x80000, 0x0f013106}, - {0x80004, 0xc428bb17}, - {0x8000C, 0x00000000}, - {0x80010, 0x0C800C80}, - {0x80014, 0x03200000}, - {0x80018, 0x01e00000}, - {0x8001C, 0x00000000}, - {0x80020, 0x01e00320}, - {0x80024, 0x042a031f}, - {0x80028, 0x0086034a}, - {0x8002C, 0x020c01df}, - {0x80030, 0x000201ea}, - {0x80200, 0x00010000}, -#else - {0x00004, 0x0}, - {0x00048, 0x00021807}, - {0x0004C, 0x091a0a01}, - {0x00054, 0x1}, - {0x00040, 0x00021807}, - {0x00044, 0x091a0a01}, - {0x00054, 0x0}, - {0x80000, 0x0f013106}, - {0x80004, 0xc428bb17}, - {0x8000C, 0x00000000}, - {0x80010, 0x0a000a00}, - {0x80014, 0x02800000}, - {0x80018, 0x01e00000}, - {0x8001C, 0x00000000}, - {0x80020, 0x01e00280}, - {0x80024, 0x02fa027f}, - {0x80028, 0x004a028b}, - {0x8002C, 0x020c01df}, - {0x80030, 0x000201e9}, - {0x80200, 0x00010000}, -#endif /* #ifdef CONFIG_FO300 */ -#endif - {0, 0} -}; -#endif /* CONFIG_VIDEO_SM501_32BPP */ - -#ifdef CONFIG_CONSOLE_EXTRA_INFO -/* - * Return text to be printed besides the logo. - */ -void video_get_info_str (int line_number, char *info) -{ - if (line_number == 1) { - strcpy (info, " Board: TQM5200 (TQ-Components GmbH)"); -#if defined (CONFIG_CHARON) || defined (CONFIG_FO300) || \ - defined(CONFIG_STK52XX) - } else if (line_number == 2) { -#if defined (CONFIG_CHARON) - strcpy (info, " on a CHARON carrier board"); -#endif -#if defined (CONFIG_STK52XX) - strcpy (info, " on a STK52xx carrier board"); -#endif -#if defined (CONFIG_FO300) - strcpy (info, " on a FO300 carrier board"); -#endif -#endif - } - else { - info [0] = '\0'; - } -} -#endif - -/* - * Returns SM501 register base address. First thing called in the - * driver. Checks if SM501 is physically present. - */ -unsigned int board_video_init (void) -{ - u16 save, tmp; - int restore, ret; - - /* - * Check for Grafic Controller - */ - - /* save origianl FB content */ - save = *(volatile u16 *)CONFIG_SYS_CS1_START; - restore = 1; - - /* write test pattern to FB memory */ - *(volatile u16 *)CONFIG_SYS_CS1_START = 0xA5A5; - __asm__ volatile ("sync"); - /* - * Put a different pattern on the data lines: otherwise they may float - * long enough to read back what we wrote. - */ - tmp = *(volatile u16 *)CONFIG_SYS_FLASH_BASE; - if (tmp == 0xA5A5) - puts ("!! possible error in grafic controller detection\n"); - - if (*(volatile u16 *)CONFIG_SYS_CS1_START != 0xA5A5) { - /* no grafic controller found */ - restore = 0; - ret = 0; - } else { - ret = SM501_MMIO_BASE; - } - - if (restore) { - *(volatile u16 *)CONFIG_SYS_CS1_START = save; - __asm__ volatile ("sync"); - } - return ret; -} - -/* - * Returns SM501 framebuffer address - */ -unsigned int board_video_get_fb (void) -{ - return SM501_FB_BASE; -} - -/* - * Called after initializing the SM501 and before clearing the screen. - */ -void board_validate_screen (unsigned int base) -{ -} - -/* - * Return a pointer to the initialization sequence. - */ -const SMI_REGS *board_get_regs (void) -{ - return init_regs; -} - -int board_get_width (void) -{ - return DISPLAY_WIDTH; -} - -int board_get_height (void) -{ - return DISPLAY_HEIGHT; -} - -#endif /* CONFIG_VIDEO_SM501 */ - -#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) -int ft_board_setup(void *blob, bd_t *bd) -{ - ft_cpu_setup(blob, bd); -#if defined(CONFIG_VIDEO) - fdt_add_edid(blob, "smi,sm501", edid_buf); -#endif - - return 0; -} -#endif /* defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP) */ - -#if defined(CONFIG_RESET_PHY_R) -#include <miiphy.h> - -void reset_phy(void) -{ - /* init Micrel KSZ8993 PHY */ - miiphy_write("FEC", CONFIG_PHY_ADDR, 0x01, 0x09); -} -#endif - -int board_eth_init(bd_t *bis) -{ - cpu_eth_init(bis); /* Built in FEC comes first */ - return pci_eth_init(bis); -} diff --git a/board/v38b/Kconfig b/board/v38b/Kconfig deleted file mode 100644 index 653bfc1c3b..0000000000 --- a/board/v38b/Kconfig +++ /dev/null @@ -1,9 +0,0 @@ -if TARGET_V38B - -config SYS_BOARD - default "v38b" - -config SYS_CONFIG_NAME - default "v38b" - -endif diff --git a/board/v38b/MAINTAINERS b/board/v38b/MAINTAINERS deleted file mode 100644 index d1a6ae6b2f..0000000000 --- a/board/v38b/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -V38B BOARD -#M: - -S: Maintained -F: board/v38b/ -F: include/configs/v38b.h -F: configs/v38b_defconfig diff --git a/board/v38b/Makefile b/board/v38b/Makefile deleted file mode 100644 index a20a5ef0e9..0000000000 --- a/board/v38b/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2003-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := v38b.o ethaddr.o diff --git a/board/v38b/ethaddr.c b/board/v38b/ethaddr.c deleted file mode 100644 index 982998fadc..0000000000 --- a/board/v38b/ethaddr.c +++ /dev/null @@ -1,197 +0,0 @@ -/* - * (C) Copyright 2006 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <mpc5xxx.h> - -/* For the V38B board the pin is GPIO_PSC_6 */ -#define GPIO_PIN GPIO_PSC6_0 - -#define NO_ERROR 0 -#define ERR_NO_NUMBER 1 -#define ERR_BAD_NUMBER 2 - -static int is_high(void); -static int check_device(void); -static void io_out(int value); -static void io_input(void); -static void io_output(void); -static void init_gpio(void); -static void read_byte(unsigned char *data); -static void write_byte(unsigned char command); - -void read_2501_memory(unsigned char *psernum, unsigned char *perr); -void board_get_enetaddr(uchar *enetaddr); - - -static int is_high() -{ - return (*((vu_long *) MPC5XXX_WU_GPIO_DATA_I) & GPIO_PIN); -} - -static void io_out(int value) -{ - if (value) - *((vu_long *) MPC5XXX_WU_GPIO_DATA_O) |= GPIO_PIN; - else - *((vu_long *) MPC5XXX_WU_GPIO_DATA_O) &= ~GPIO_PIN; -} - -static void io_input() -{ - *((vu_long *) MPC5XXX_WU_GPIO_DIR) &= ~GPIO_PIN; - udelay(3); /* allow input to settle */ -} - -static void io_output() -{ - *((vu_long *) MPC5XXX_WU_GPIO_DIR) |= GPIO_PIN; -} - -static void init_gpio() -{ - *((vu_long *) MPC5XXX_WU_GPIO_ENABLE) |= GPIO_PIN; /* Enable appropriate pin */ -} - -void read_2501_memory(unsigned char *psernum, unsigned char *perr) -{ -#define NBYTES 28 - unsigned char crcval, i; - unsigned char buf[NBYTES]; - - *perr = 0; - crcval = 0; - - for (i = 0; i < NBYTES; i++) - buf[i] = 0; - - if (!check_device()) - *perr = ERR_NO_NUMBER; - else { - *perr = NO_ERROR; - write_byte(0xCC); /* skip ROM (0xCC) */ - write_byte(0xF0); /* Read memory command 0xF0 */ - write_byte(0x00); /* Address TA1=0, TA2=0 */ - write_byte(0x00); - read_byte(&crcval); /* Read CRC of address and command */ - - for (i = 0; i < NBYTES; i++) - read_byte(&buf[i]); - } - if (strncmp((const char *) &buf[11], "MAREL IEEE 802.3", 16)) { - *perr = ERR_BAD_NUMBER; - psernum[0] = 0x00; - psernum[1] = 0xE0; - psernum[2] = 0xEE; - psernum[3] = 0xFF; - psernum[4] = 0xFF; - psernum[5] = 0xFF; - } else { - psernum[0] = 0x00; - psernum[1] = 0xE0; - psernum[2] = 0xEE; - psernum[3] = buf[7]; - psernum[4] = buf[6]; - psernum[5] = buf[5]; - } -} - -static int check_device() -{ - int found; - - io_output(); - io_out(0); - udelay(500); /* must be at least 480 us low pulse */ - - io_input(); - udelay(60); - - found = (is_high() == 0) ? 1 : 0; - udelay(500); /* must be at least 480 us low pulse */ - - return found; -} - -static void write_byte(unsigned char command) -{ - char i; - - for (i = 0; i < 8; i++) { - /* 1 us to 15 us low pulse starts bit slot */ - /* Start with high pulse for 3 us */ - io_input(); - udelay(3); - - io_out(0); - io_output(); - udelay(3); - - if (command & 0x01) { - /* 60 us high for 1-bit */ - io_input(); - udelay(60); - } else - /* 60 us low for 0-bit */ - udelay(60); - /* Leave pin as input */ - io_input(); - - command = command >> 1; - } -} - -static void read_byte(unsigned char *data) -{ - unsigned char i, rdat = 0; - - for (i = 0; i < 8; i++) { - /* read one bit from one-wire device */ - - /* 1 - 15 us low starts bit slot */ - io_out(0); - io_output(); - udelay(0); - - /* allow line to be pulled high */ - io_input(); - - /* delay 10 us */ - udelay(10); - - /* now sample input status */ - if (is_high()) - rdat = (rdat >> 1) | 0x80; - else - rdat = rdat >> 1; - - udelay(60); /* at least 60 us */ - } - /* copy the return value */ - *data = rdat; -} - -void board_get_enetaddr(uchar *enetaddr) -{ - unsigned char sn[6], err = NO_ERROR; - - init_gpio(); - - read_2501_memory(sn, &err); - - if (err == NO_ERROR) { - sprintf((char *)enetaddr, "%02x:%02x:%02x:%02x:%02x:%02x", - sn[0], sn[1], sn[2], sn[3], sn[4], sn[5]); - printf("MAC address: %s\n", enetaddr); - setenv("ethaddr", (char *)enetaddr); - } else { - sprintf((char *)enetaddr, "00:01:02:03:04:05"); - printf("Error reading MAC address.\n"); - printf("Setting default to %s\n", enetaddr); - setenv("ethaddr", (char *)enetaddr); - } -} diff --git a/board/v38b/v38b.c b/board/v38b/v38b.c deleted file mode 100644 index e680b7b8ff..0000000000 --- a/board/v38b/v38b.c +++ /dev/null @@ -1,263 +0,0 @@ -/* - * (C) Copyright 2003-2006 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * (C) Copyright 2004 - * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <mpc5xxx.h> -#include <net.h> -#include <asm/processor.h> - -DECLARE_GLOBAL_DATA_PTR; - -#ifndef CONFIG_SYS_RAMBOOT -static void sdram_start(int hi_addr) -{ - long hi_addr_bit = hi_addr ? 0x01000000 : 0; - - /* unlock mode register */ - *(vu_long *) MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000000 | hi_addr_bit; - __asm__ volatile ("sync"); - - /* precharge all banks */ - *(vu_long *) MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit; - __asm__ volatile ("sync"); - -#if SDRAM_DDR - /* set mode register: extended mode */ - *(vu_long *) MPC5XXX_SDRAM_MODE = SDRAM_EMODE; - __asm__ volatile ("sync"); - - /* set mode register: reset DLL */ - *(vu_long *) MPC5XXX_SDRAM_MODE = SDRAM_MODE | 0x04000000; - __asm__ volatile ("sync"); -#endif /* SDRAM_DDR */ - - /* precharge all banks */ - *(vu_long *) MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 | hi_addr_bit; - __asm__ volatile ("sync"); - - /* auto refresh */ - *(vu_long *) MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 | hi_addr_bit; - __asm__ volatile ("sync"); - - /* set mode register */ - *(vu_long *) MPC5XXX_SDRAM_MODE = SDRAM_MODE; - __asm__ volatile ("sync"); - - /* normal operation */ - *(vu_long *) MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit; - __asm__ volatile ("sync"); -} -#endif /* !CONFIG_SYS_RAMBOOT */ - - -int dram_init(void) -{ - ulong dramsize = 0; - ulong dramsize2 = 0; - uint svr, pvr; - -#ifndef CONFIG_SYS_RAMBOOT - ulong test1, test2; - - /* setup SDRAM chip selects */ - *(vu_long *) MPC5XXX_SDRAM_CS0CFG = 0x0000001e; /* 2G at 0x0 */ - *(vu_long *) MPC5XXX_SDRAM_CS1CFG = 0x80000000; /* disabled */ - __asm__ volatile ("sync"); - - /* setup config registers */ - *(vu_long *) MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1; - *(vu_long *) MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2; - __asm__ volatile ("sync"); - -#if SDRAM_DDR - /* set tap delay */ - *(vu_long *) MPC5XXX_CDM_PORCFG = SDRAM_TAPDELAY; - __asm__ volatile ("sync"); -#endif /* SDRAM_DDR */ - - /* find RAM size using SDRAM CS0 only */ - sdram_start(0); - test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000); - sdram_start(1); - test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000); - if (test1 > test2) { - sdram_start(0); - dramsize = test1; - } else - dramsize = test2; - - /* memory smaller than 1MB is impossible */ - if (dramsize < (1 << 20)) - dramsize = 0; - - /* set SDRAM CS0 size according to the amount of RAM found */ - if (dramsize > 0) - *(vu_long *) MPC5XXX_SDRAM_CS0CFG = 0x13 + __builtin_ffs(dramsize >> 20) - 1; - else - *(vu_long *) MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */ - - /* let SDRAM CS1 start right after CS0 */ - *(vu_long *) MPC5XXX_SDRAM_CS1CFG = dramsize + 0x0000001e;/* 2G */ - - /* find RAM size using SDRAM CS1 only */ - if (!dramsize) - sdram_start(0); - test2 = test1 = get_ram_size((long *) (CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000); - if (!dramsize) { - sdram_start(1); - test2 = get_ram_size((long *) (CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000); - } - if (test1 > test2) { - sdram_start(0); - dramsize2 = test1; - } else - dramsize2 = test2; - - /* memory smaller than 1MB is impossible */ - if (dramsize2 < (1 << 20)) - dramsize2 = 0; - - /* set SDRAM CS1 size according to the amount of RAM found */ - if (dramsize2 > 0) - *(vu_long *) MPC5XXX_SDRAM_CS1CFG = dramsize - | (0x13 + __builtin_ffs(dramsize2 >> 20) - 1); - else - *(vu_long *) MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */ - -#else /* CONFIG_SYS_RAMBOOT */ - - /* retrieve size of memory connected to SDRAM CS0 */ - dramsize = *(vu_long *) MPC5XXX_SDRAM_CS0CFG & 0xFF; - if (dramsize >= 0x13) - dramsize = (1 << (dramsize - 0x13)) << 20; - else - dramsize = 0; - - /* retrieve size of memory connected to SDRAM CS1 */ - dramsize2 = *(vu_long *) MPC5XXX_SDRAM_CS1CFG & 0xFF; - if (dramsize2 >= 0x13) - dramsize2 = (1 << (dramsize2 - 0x13)) << 20; - else - dramsize2 = 0; - -#endif /* CONFIG_SYS_RAMBOOT */ - - /* - * On MPC5200B we need to set the special configuration delay in the - * DDR controller. Please refer to Freescale's AN3221 "MPC5200B SDRAM - * Initialization and Configuration", 3.3.1 SDelay--MBAR + 0x0190: - * - * "The SDelay should be written to a value of 0x00000004. It is - * required to account for changes caused by normal wafer processing - * parameters." - */ - svr = get_svr(); - pvr = get_pvr(); - if ((SVR_MJREV(svr) >= 2) && - (PVR_MAJ(pvr) == 1) && (PVR_MIN(pvr) == 4)) { - - *(vu_long *) MPC5XXX_SDRAM_SDELAY = 0x04; - __asm__ volatile ("sync"); - } - - gd->ram_size = dramsize + dramsize2; - - return 0; -} - - -int checkboard (void) -{ - puts("Board: MarelV38B\n"); - return 0; -} - -int board_early_init_f(void) -{ -#ifdef CONFIG_HW_WATCHDOG - /* - * Enable and configure the direction (output) of PSC3_9 - watchdog - * reset input. Refer to 7.3.2.2.[1,3,4] of the MPC5200B User's - * Manual. - */ - *(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC3_9; - *(vu_long *) MPC5XXX_WU_GPIO_DIR |= GPIO_PSC3_9; -#endif /* CONFIG_HW_WATCHDOG */ - return 0; -} - -int board_early_init_r(void) -{ - /* - * Now, when we are in RAM, enable flash write access for the - * detection process. Note that CS_BOOT cannot be cleared when - * executing in flash. - */ - *(vu_long *) MPC5XXX_BOOTCS_CFG &= ~0x1; /* clear RO */ - - /* - * Enable GPIO_WKUP_7 to "read the status of the actual power - * situation". Default direction is input, so no need to set it - * explicitly. - */ - *(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_WKUP_7; - return 0; -} - -extern void board_get_enetaddr(uchar *enetaddr); -int misc_init_r(void) -{ - uchar enetaddr[6]; - - if (!eth_getenv_enetaddr("ethaddr", enetaddr)) { - board_get_enetaddr(enetaddr); - eth_setenv_enetaddr("ethaddr", enetaddr); - } - - return 0; -} - -#if defined(CONFIG_IDE) && defined(CONFIG_IDE_RESET) -void init_ide_reset(void) -{ - debug("init_ide_reset\n"); - - /* Configure PSC1_4 as GPIO output for ATA reset */ - *(vu_long *) MPC5XXX_WU_GPIO_ENABLE |= GPIO_PSC1_4; - *(vu_long *) MPC5XXX_WU_GPIO_DIR |= GPIO_PSC1_4; - /* Deassert reset */ - *(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_PSC1_4; -} - - -void ide_set_reset(int idereset) -{ - debug("ide_reset(%d)\n", idereset); - - if (idereset) { - *(vu_long *) MPC5XXX_WU_GPIO_DATA_O &= ~GPIO_PSC1_4; - /* Make a delay. MPC5200 spec says 25 usec min */ - udelay(500000); - } else - *(vu_long *) MPC5XXX_WU_GPIO_DATA_O |= GPIO_PSC1_4; -} -#endif - - -#ifdef CONFIG_HW_WATCHDOG -void hw_watchdog_reset(void) -{ - /* - * MarelV38B has a TPS3705 watchdog. Spec says that to kick the dog - * we need a positive or negative transition on WDI i.e., our PSC3_9. - */ - *(vu_long *) MPC5XXX_WU_GPIO_DATA_O ^= GPIO_PSC3_9; -} -#endif /* CONFIG_HW_WATCHDOG */ diff --git a/cmd/Kconfig b/cmd/Kconfig index 412bf24fb2..07b0e3b228 100644 --- a/cmd/Kconfig +++ b/cmd/Kconfig @@ -1232,7 +1232,7 @@ config CMD_DIAG
config CMD_IRQ bool "irq - Show information about interrupts" - depends on !ARM && !MIPS && !SH && !MPC512X + depends on !ARM && !MIPS && !SH help This enables two commands:
diff --git a/cmd/reginfo.c b/cmd/reginfo.c index e09b24c901..4dccf24389 100644 --- a/cmd/reginfo.c +++ b/cmd/reginfo.c @@ -11,8 +11,6 @@ #include <mpc8xx.h> #elif defined (CONFIG_4xx) extern void ppc4xx_reginfo(void); -#elif defined (CONFIG_MPC5200) -#include <mpc5xxx.h> #elif defined (CONFIG_MPC86xx) extern void mpc86xx_reginfo(void); #elif defined(CONFIG_MPC85xx) @@ -77,59 +75,6 @@ static int do_reginfo(cmd_tbl_t *cmdtp, int flag, int argc,
#elif defined (CONFIG_4xx) ppc4xx_reginfo(); -#elif defined(CONFIG_MPC5200) - puts ("\nMPC5200 registers\n"); - printf ("MBAR=%08x\n", CONFIG_SYS_MBAR); - puts ("Memory map registers\n"); - printf ("\tCS0: start %08lX\tstop %08lX\tconfig %08lX\ten %d\n", - *(volatile ulong*)MPC5XXX_CS0_START, - *(volatile ulong*)MPC5XXX_CS0_STOP, - *(volatile ulong*)MPC5XXX_CS0_CFG, - (*(volatile ulong*)MPC5XXX_ADDECR & 0x00010000) ? 1 : 0); - printf ("\tCS1: start %08lX\tstop %08lX\tconfig %08lX\ten %d\n", - *(volatile ulong*)MPC5XXX_CS1_START, - *(volatile ulong*)MPC5XXX_CS1_STOP, - *(volatile ulong*)MPC5XXX_CS1_CFG, - (*(volatile ulong*)MPC5XXX_ADDECR & 0x00020000) ? 1 : 0); - printf ("\tCS2: start %08lX\tstop %08lX\tconfig %08lX\ten %d\n", - *(volatile ulong*)MPC5XXX_CS2_START, - *(volatile ulong*)MPC5XXX_CS2_STOP, - *(volatile ulong*)MPC5XXX_CS2_CFG, - (*(volatile ulong*)MPC5XXX_ADDECR & 0x00040000) ? 1 : 0); - printf ("\tCS3: start %08lX\tstop %08lX\tconfig %08lX\ten %d\n", - *(volatile ulong*)MPC5XXX_CS3_START, - *(volatile ulong*)MPC5XXX_CS3_STOP, - *(volatile ulong*)MPC5XXX_CS3_CFG, - (*(volatile ulong*)MPC5XXX_ADDECR & 0x00080000) ? 1 : 0); - printf ("\tCS4: start %08lX\tstop %08lX\tconfig %08lX\ten %d\n", - *(volatile ulong*)MPC5XXX_CS4_START, - *(volatile ulong*)MPC5XXX_CS4_STOP, - *(volatile ulong*)MPC5XXX_CS4_CFG, - (*(volatile ulong*)MPC5XXX_ADDECR & 0x00100000) ? 1 : 0); - printf ("\tCS5: start %08lX\tstop %08lX\tconfig %08lX\ten %d\n", - *(volatile ulong*)MPC5XXX_CS5_START, - *(volatile ulong*)MPC5XXX_CS5_STOP, - *(volatile ulong*)MPC5XXX_CS5_CFG, - (*(volatile ulong*)MPC5XXX_ADDECR & 0x00200000) ? 1 : 0); - printf ("\tCS6: start %08lX\tstop %08lX\tconfig %08lX\ten %d\n", - *(volatile ulong*)MPC5XXX_CS6_START, - *(volatile ulong*)MPC5XXX_CS6_STOP, - *(volatile ulong*)MPC5XXX_CS6_CFG, - (*(volatile ulong*)MPC5XXX_ADDECR & 0x04000000) ? 1 : 0); - printf ("\tCS7: start %08lX\tstop %08lX\tconfig %08lX\ten %d\n", - *(volatile ulong*)MPC5XXX_CS7_START, - *(volatile ulong*)MPC5XXX_CS7_STOP, - *(volatile ulong*)MPC5XXX_CS7_CFG, - (*(volatile ulong*)MPC5XXX_ADDECR & 0x08000000) ? 1 : 0); - printf ("\tBOOTCS: start %08lX\tstop %08lX\tconfig %08lX\ten %d\n", - *(volatile ulong*)MPC5XXX_BOOTCS_START, - *(volatile ulong*)MPC5XXX_BOOTCS_STOP, - *(volatile ulong*)MPC5XXX_BOOTCS_CFG, - (*(volatile ulong*)MPC5XXX_ADDECR & 0x02000000) ? 1 : 0); - printf ("\tSDRAMCS0: %08lX\n", - *(volatile ulong*)MPC5XXX_SDRAM_CS0CFG); - printf ("\tSDRAMCS1: %08lX\n", - *(volatile ulong*)MPC5XXX_SDRAM_CS1CFG); #elif defined(CONFIG_MPC86xx) mpc86xx_reginfo();
diff --git a/common/Kconfig b/common/Kconfig index c49199bb1a..27dde11b14 100644 --- a/common/Kconfig +++ b/common/Kconfig @@ -464,7 +464,7 @@ config BOARD_LATE_INIT
config DISPLAY_CPUINFO bool "Display information about the CPU during start up" - default y if ARM || NIOS2 || X86 || XTENSA || MPC5xxx + default y if ARM || NIOS2 || X86 || XTENSA help Display information about the CPU that U-Boot is running on when U-Boot starts up. The function print_cpuinfo() is called diff --git a/common/board_f.c b/common/board_f.c index 85a9fb7f9d..d5afc87839 100644 --- a/common/board_f.c +++ b/common/board_f.c @@ -551,7 +551,7 @@ static int setup_board_part1(void) defined(CONFIG_E500) || defined(CONFIG_MPC86xx) bd->bi_immr_base = CONFIG_SYS_IMMR; /* base of IMMR register */ #endif -#if defined(CONFIG_MPC5xxx) || defined(CONFIG_M68K) +#if defined(CONFIG_M68K) bd->bi_mbar_base = CONFIG_SYS_MBAR; /* base of internal registers */ #endif #if defined(CONFIG_MPC83xx) @@ -575,13 +575,6 @@ static int setup_board_part2(void) bd->bi_sccfreq = gd->arch.scc_clk; bd->bi_vco = gd->arch.vco_out; #endif /* CONFIG_CPM2 */ -#if defined(CONFIG_MPC512X) - bd->bi_ipsfreq = gd->arch.ips_clk; -#endif /* CONFIG_MPC512X */ -#if defined(CONFIG_MPC5xxx) - bd->bi_ipbfreq = gd->arch.ipb_clk; - bd->bi_pcifreq = gd->pci_clk; -#endif /* CONFIG_MPC5xxx */ #if defined(CONFIG_M68K) && defined(CONFIG_PCI) bd->bi_pcifreq = gd->pci_clk; #endif diff --git a/configs/MiniFAP_defconfig b/configs/MiniFAP_defconfig deleted file mode 100644 index b9cbafc887..0000000000 --- a/configs/MiniFAP_defconfig +++ /dev/null @@ -1,33 +0,0 @@ -CONFIG_PPC=y -CONFIG_VIDEO=y -CONFIG_MPC5xxx=y -CONFIG_TARGET_TQM5200=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_SYS_EXTRA_OPTIONS="MINIFAP" -CONFIG_BOOTDELAY=5 -# CONFIG_CONSOLE_MUX is not set -CONFIG_SYS_CONSOLE_IS_IN_ENV=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_ASKENV=y -CONFIG_LOOPW=y -CONFIG_CMD_IDE=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_SNTP=y -CONFIG_CMD_BMP=y -CONFIG_CMD_BSP=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_CMD_JFFS2=y -CONFIG_CMD_DIAG=y -CONFIG_MAC_PARTITION=y -CONFIG_ISO_PARTITION=y -# CONFIG_MMC is not set -CONFIG_MTD_NOR_FLASH=y -CONFIG_USB=y -CONFIG_USB_STORAGE=y -CONFIG_CONSOLE_EXTRA_INFO=y -CONFIG_OF_LIBFDT=y diff --git a/configs/O2D300_defconfig b/configs/O2D300_defconfig deleted file mode 100644 index c0e9541b87..0000000000 --- a/configs/O2D300_defconfig +++ /dev/null @@ -1,17 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC5xxx=y -CONFIG_TARGET_O2D300=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_BOOTDELAY=5 -CONFIG_HUSH_PARSER=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_FAT=y -CONFIG_MAC_PARTITION=y -CONFIG_ISO_PARTITION=y -# CONFIG_MMC is not set -CONFIG_MTD_NOR_FLASH=y -# CONFIG_PCI is not set -CONFIG_OF_LIBFDT=y diff --git a/configs/O2DNT2_RAMBOOT_defconfig b/configs/O2DNT2_RAMBOOT_defconfig deleted file mode 100644 index 8cff44cf36..0000000000 --- a/configs/O2DNT2_RAMBOOT_defconfig +++ /dev/null @@ -1,21 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC5xxx=y -CONFIG_TARGET_O2DNT2=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0x00100000" -CONFIG_BOOTDELAY=5 -CONFIG_HUSH_PARSER=y -CONFIG_AUTOBOOT_KEYED=y -CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press password to stop\n" -CONFIG_AUTOBOOT_STOP_STR="++++++++++" -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_FAT=y -CONFIG_MAC_PARTITION=y -CONFIG_ISO_PARTITION=y -# CONFIG_MMC is not set -CONFIG_MTD_NOR_FLASH=y -# CONFIG_PCI is not set -CONFIG_OF_LIBFDT=y diff --git a/configs/O2DNT2_defconfig b/configs/O2DNT2_defconfig deleted file mode 100644 index f29abb83bc..0000000000 --- a/configs/O2DNT2_defconfig +++ /dev/null @@ -1,20 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC5xxx=y -CONFIG_TARGET_O2DNT2=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_BOOTDELAY=5 -CONFIG_HUSH_PARSER=y -CONFIG_AUTOBOOT_KEYED=y -CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press password to stop\n" -CONFIG_AUTOBOOT_STOP_STR="++++++++++" -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_FAT=y -CONFIG_MAC_PARTITION=y -CONFIG_ISO_PARTITION=y -# CONFIG_MMC is not set -CONFIG_MTD_NOR_FLASH=y -# CONFIG_PCI is not set -CONFIG_OF_LIBFDT=y diff --git a/configs/O2D_defconfig b/configs/O2D_defconfig deleted file mode 100644 index 534cfe12e2..0000000000 --- a/configs/O2D_defconfig +++ /dev/null @@ -1,17 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC5xxx=y -CONFIG_TARGET_O2D=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_BOOTDELAY=5 -CONFIG_HUSH_PARSER=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_FAT=y -CONFIG_MAC_PARTITION=y -CONFIG_ISO_PARTITION=y -# CONFIG_MMC is not set -CONFIG_MTD_NOR_FLASH=y -# CONFIG_PCI is not set -CONFIG_OF_LIBFDT=y diff --git a/configs/O2I_defconfig b/configs/O2I_defconfig deleted file mode 100644 index acf42abe29..0000000000 --- a/configs/O2I_defconfig +++ /dev/null @@ -1,17 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC5xxx=y -CONFIG_TARGET_O2I=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_BOOTDELAY=5 -CONFIG_HUSH_PARSER=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_FAT=y -CONFIG_MAC_PARTITION=y -CONFIG_ISO_PARTITION=y -# CONFIG_MMC is not set -CONFIG_MTD_NOR_FLASH=y -# CONFIG_PCI is not set -CONFIG_OF_LIBFDT=y diff --git a/configs/O2MNT_O2M110_defconfig b/configs/O2MNT_O2M110_defconfig deleted file mode 100644 index de647c76b9..0000000000 --- a/configs/O2MNT_O2M110_defconfig +++ /dev/null @@ -1,18 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC5xxx=y -CONFIG_TARGET_O2MNT=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_SYS_EXTRA_OPTIONS="IFM_SENSOR_TYPE="O2M110"" -CONFIG_BOOTDELAY=5 -CONFIG_HUSH_PARSER=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_FAT=y -CONFIG_MAC_PARTITION=y -CONFIG_ISO_PARTITION=y -# CONFIG_MMC is not set -CONFIG_MTD_NOR_FLASH=y -# CONFIG_PCI is not set -CONFIG_OF_LIBFDT=y diff --git a/configs/O2MNT_O2M112_defconfig b/configs/O2MNT_O2M112_defconfig deleted file mode 100644 index b243e9cc0e..0000000000 --- a/configs/O2MNT_O2M112_defconfig +++ /dev/null @@ -1,18 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC5xxx=y -CONFIG_TARGET_O2MNT=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_SYS_EXTRA_OPTIONS="IFM_SENSOR_TYPE="O2M112"" -CONFIG_BOOTDELAY=5 -CONFIG_HUSH_PARSER=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_FAT=y -CONFIG_MAC_PARTITION=y -CONFIG_ISO_PARTITION=y -# CONFIG_MMC is not set -CONFIG_MTD_NOR_FLASH=y -# CONFIG_PCI is not set -CONFIG_OF_LIBFDT=y diff --git a/configs/O2MNT_O2M113_defconfig b/configs/O2MNT_O2M113_defconfig deleted file mode 100644 index 1584058289..0000000000 --- a/configs/O2MNT_O2M113_defconfig +++ /dev/null @@ -1,18 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC5xxx=y -CONFIG_TARGET_O2MNT=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_SYS_EXTRA_OPTIONS="IFM_SENSOR_TYPE="O2M113"" -CONFIG_BOOTDELAY=5 -CONFIG_HUSH_PARSER=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_FAT=y -CONFIG_MAC_PARTITION=y -CONFIG_ISO_PARTITION=y -# CONFIG_MMC is not set -CONFIG_MTD_NOR_FLASH=y -# CONFIG_PCI is not set -CONFIG_OF_LIBFDT=y diff --git a/configs/O2MNT_defconfig b/configs/O2MNT_defconfig deleted file mode 100644 index 20bd31466e..0000000000 --- a/configs/O2MNT_defconfig +++ /dev/null @@ -1,17 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC5xxx=y -CONFIG_TARGET_O2MNT=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_BOOTDELAY=5 -CONFIG_HUSH_PARSER=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_FAT=y -CONFIG_MAC_PARTITION=y -CONFIG_ISO_PARTITION=y -# CONFIG_MMC is not set -CONFIG_MTD_NOR_FLASH=y -# CONFIG_PCI is not set -CONFIG_OF_LIBFDT=y diff --git a/configs/O3DNT_defconfig b/configs/O3DNT_defconfig deleted file mode 100644 index ea769e7edc..0000000000 --- a/configs/O3DNT_defconfig +++ /dev/null @@ -1,18 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC5xxx=y -CONFIG_TARGET_O3DNT=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_BOOTDELAY=5 -CONFIG_HUSH_PARSER=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_BSP=y -CONFIG_CMD_FAT=y -CONFIG_MAC_PARTITION=y -CONFIG_ISO_PARTITION=y -# CONFIG_MMC is not set -CONFIG_MTD_NOR_FLASH=y -# CONFIG_PCI is not set -CONFIG_OF_LIBFDT=y diff --git a/configs/TQM5200S_HIGHBOOT_defconfig b/configs/TQM5200S_HIGHBOOT_defconfig deleted file mode 100644 index 5e6f9c951f..0000000000 --- a/configs/TQM5200S_HIGHBOOT_defconfig +++ /dev/null @@ -1,28 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC5xxx=y -CONFIG_TARGET_TQM5200=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_SYS_EXTRA_OPTIONS="TQM5200_B,TQM5200S,SYS_TEXT_BASE=0xFFF00000" -CONFIG_BOOTDELAY=5 -CONFIG_HUSH_PARSER=y -CONFIG_CMD_ASKENV=y -CONFIG_LOOPW=y -CONFIG_CMD_IDE=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_SNTP=y -CONFIG_CMD_BSP=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_CMD_JFFS2=y -CONFIG_CMD_DIAG=y -CONFIG_MAC_PARTITION=y -CONFIG_ISO_PARTITION=y -# CONFIG_MMC is not set -CONFIG_MTD_NOR_FLASH=y -CONFIG_USB=y -CONFIG_USB_STORAGE=y -CONFIG_OF_LIBFDT=y diff --git a/configs/TQM5200S_defconfig b/configs/TQM5200S_defconfig deleted file mode 100644 index d0c352faa1..0000000000 --- a/configs/TQM5200S_defconfig +++ /dev/null @@ -1,28 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC5xxx=y -CONFIG_TARGET_TQM5200=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_SYS_EXTRA_OPTIONS="TQM5200_B,TQM5200S" -CONFIG_BOOTDELAY=5 -CONFIG_HUSH_PARSER=y -CONFIG_CMD_ASKENV=y -CONFIG_LOOPW=y -CONFIG_CMD_IDE=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_SNTP=y -CONFIG_CMD_BSP=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_CMD_JFFS2=y -CONFIG_CMD_DIAG=y -CONFIG_MAC_PARTITION=y -CONFIG_ISO_PARTITION=y -# CONFIG_MMC is not set -CONFIG_MTD_NOR_FLASH=y -CONFIG_USB=y -CONFIG_USB_STORAGE=y -CONFIG_OF_LIBFDT=y diff --git a/configs/TQM5200_B_HIGHBOOT_defconfig b/configs/TQM5200_B_HIGHBOOT_defconfig deleted file mode 100644 index ed74408b98..0000000000 --- a/configs/TQM5200_B_HIGHBOOT_defconfig +++ /dev/null @@ -1,33 +0,0 @@ -CONFIG_PPC=y -CONFIG_VIDEO=y -CONFIG_MPC5xxx=y -CONFIG_TARGET_TQM5200=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_SYS_EXTRA_OPTIONS="TQM5200_B,SYS_TEXT_BASE=0xFFF00000" -CONFIG_BOOTDELAY=5 -# CONFIG_CONSOLE_MUX is not set -CONFIG_SYS_CONSOLE_IS_IN_ENV=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_ASKENV=y -CONFIG_LOOPW=y -CONFIG_CMD_IDE=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_SNTP=y -CONFIG_CMD_BMP=y -CONFIG_CMD_BSP=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_CMD_JFFS2=y -CONFIG_CMD_DIAG=y -CONFIG_MAC_PARTITION=y -CONFIG_ISO_PARTITION=y -# CONFIG_MMC is not set -CONFIG_MTD_NOR_FLASH=y -CONFIG_USB=y -CONFIG_USB_STORAGE=y -CONFIG_CONSOLE_EXTRA_INFO=y -CONFIG_OF_LIBFDT=y diff --git a/configs/TQM5200_B_defconfig b/configs/TQM5200_B_defconfig deleted file mode 100644 index cc9968cacb..0000000000 --- a/configs/TQM5200_B_defconfig +++ /dev/null @@ -1,33 +0,0 @@ -CONFIG_PPC=y -CONFIG_VIDEO=y -CONFIG_MPC5xxx=y -CONFIG_TARGET_TQM5200=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_SYS_EXTRA_OPTIONS="TQM5200_B" -CONFIG_BOOTDELAY=5 -# CONFIG_CONSOLE_MUX is not set -CONFIG_SYS_CONSOLE_IS_IN_ENV=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_ASKENV=y -CONFIG_LOOPW=y -CONFIG_CMD_IDE=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_SNTP=y -CONFIG_CMD_BMP=y -CONFIG_CMD_BSP=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_CMD_JFFS2=y -CONFIG_CMD_DIAG=y -CONFIG_MAC_PARTITION=y -CONFIG_ISO_PARTITION=y -# CONFIG_MMC is not set -CONFIG_MTD_NOR_FLASH=y -CONFIG_USB=y -CONFIG_USB_STORAGE=y -CONFIG_CONSOLE_EXTRA_INFO=y -CONFIG_OF_LIBFDT=y diff --git a/configs/TQM5200_STK100_defconfig b/configs/TQM5200_STK100_defconfig deleted file mode 100644 index 35d486033b..0000000000 --- a/configs/TQM5200_STK100_defconfig +++ /dev/null @@ -1,33 +0,0 @@ -CONFIG_PPC=y -CONFIG_VIDEO=y -CONFIG_MPC5xxx=y -CONFIG_TARGET_TQM5200=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_SYS_EXTRA_OPTIONS="STK52XX_REV100" -CONFIG_BOOTDELAY=5 -# CONFIG_CONSOLE_MUX is not set -CONFIG_SYS_CONSOLE_IS_IN_ENV=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_ASKENV=y -CONFIG_LOOPW=y -CONFIG_CMD_IDE=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_SNTP=y -CONFIG_CMD_BMP=y -CONFIG_CMD_BSP=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_CMD_JFFS2=y -CONFIG_CMD_DIAG=y -CONFIG_MAC_PARTITION=y -CONFIG_ISO_PARTITION=y -# CONFIG_MMC is not set -CONFIG_MTD_NOR_FLASH=y -CONFIG_USB=y -CONFIG_USB_STORAGE=y -CONFIG_CONSOLE_EXTRA_INFO=y -CONFIG_OF_LIBFDT=y diff --git a/configs/TQM5200_defconfig b/configs/TQM5200_defconfig deleted file mode 100644 index 783c39a052..0000000000 --- a/configs/TQM5200_defconfig +++ /dev/null @@ -1,32 +0,0 @@ -CONFIG_PPC=y -CONFIG_VIDEO=y -CONFIG_MPC5xxx=y -CONFIG_TARGET_TQM5200=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_BOOTDELAY=5 -# CONFIG_CONSOLE_MUX is not set -CONFIG_SYS_CONSOLE_IS_IN_ENV=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_ASKENV=y -CONFIG_LOOPW=y -CONFIG_CMD_IDE=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_SNTP=y -CONFIG_CMD_BMP=y -CONFIG_CMD_BSP=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_CMD_JFFS2=y -CONFIG_CMD_DIAG=y -CONFIG_MAC_PARTITION=y -CONFIG_ISO_PARTITION=y -# CONFIG_MMC is not set -CONFIG_MTD_NOR_FLASH=y -CONFIG_USB=y -CONFIG_USB_STORAGE=y -CONFIG_CONSOLE_EXTRA_INFO=y -CONFIG_OF_LIBFDT=y diff --git a/configs/a3m071_defconfig b/configs/a3m071_defconfig deleted file mode 100644 index a461b809c6..0000000000 --- a/configs/a3m071_defconfig +++ /dev/null @@ -1,32 +0,0 @@ -CONFIG_PPC=y -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_SPL_SERIAL_SUPPORT=y -CONFIG_MPC5xxx=y -CONFIG_TARGET_A3M071=y -CONFIG_FIT=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_BOOTDELAY=3 -CONFIG_SYS_CONSOLE_IS_IN_ENV=y -CONFIG_SYS_CONSOLE_INFO_QUIET=y -CONFIG_SPL=y -CONFIG_SPL_BOARD_INIT=y -CONFIG_SPL_ENV_SUPPORT=y -CONFIG_SPL_NOR_SUPPORT=y -CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_OS_BASE=0xfc200000 -CONFIG_HUSH_PARSER=y -CONFIG_LOOPW=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_LINK_LOCAL=y -CONFIG_CMD_BSP=y -CONFIG_CMD_CACHE=y -CONFIG_CMD_UBI=y -# CONFIG_MMC is not set -CONFIG_MTD_NOR_FLASH=y -# CONFIG_PCI is not set -CONFIG_LIB_RAND=y -CONFIG_OF_LIBFDT=y diff --git a/configs/a4m072_defconfig b/configs/a4m072_defconfig deleted file mode 100644 index 4fbffb6edc..0000000000 --- a/configs/a4m072_defconfig +++ /dev/null @@ -1,25 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC5xxx=y -CONFIG_TARGET_A4M072=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_SILENT_CONSOLE=y -CONFIG_HUSH_PARSER=y -CONFIG_AUTOBOOT_KEYED=y -CONFIG_AUTOBOOT_PROMPT="autoboot in %d seconds\n" -CONFIG_AUTOBOOT_DELAY_STR="asdfg" -CONFIG_CMD_IDE=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_SNTP=y -CONFIG_CMD_DISPLAY=y -CONFIG_CMD_FAT=y -CONFIG_MAC_PARTITION=y -# CONFIG_MMC is not set -CONFIG_MTD_NOR_FLASH=y -CONFIG_BAUDRATE=9600 -CONFIG_USB=y -CONFIG_USB_STORAGE=y -CONFIG_OF_LIBFDT=y diff --git a/configs/a4m2k_defconfig b/configs/a4m2k_defconfig deleted file mode 100644 index 3100da6c6e..0000000000 --- a/configs/a4m2k_defconfig +++ /dev/null @@ -1,33 +0,0 @@ -CONFIG_PPC=y -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_SPL_SERIAL_SUPPORT=y -CONFIG_MPC5xxx=y -CONFIG_TARGET_A3M071=y -CONFIG_FIT=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_SYS_EXTRA_OPTIONS="A4M2K" -CONFIG_BOOTDELAY=3 -CONFIG_SYS_CONSOLE_IS_IN_ENV=y -CONFIG_SYS_CONSOLE_INFO_QUIET=y -CONFIG_SPL=y -CONFIG_SPL_BOARD_INIT=y -CONFIG_SPL_ENV_SUPPORT=y -CONFIG_SPL_NOR_SUPPORT=y -CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_OS_BASE=0xfc200000 -CONFIG_HUSH_PARSER=y -CONFIG_LOOPW=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_LINK_LOCAL=y -CONFIG_CMD_BSP=y -CONFIG_CMD_CACHE=y -CONFIG_CMD_UBI=y -# CONFIG_MMC is not set -CONFIG_MTD_NOR_FLASH=y -# CONFIG_PCI is not set -CONFIG_LIB_RAND=y -CONFIG_OF_LIBFDT=y diff --git a/configs/ac14xx_defconfig b/configs/ac14xx_defconfig deleted file mode 100644 index 6855331860..0000000000 --- a/configs/ac14xx_defconfig +++ /dev/null @@ -1,16 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC512X=y -CONFIG_TARGET_AC14XX=y -CONFIG_FIT=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_SYS_PROMPT="ac14xx> " -CONFIG_CMD_ASKENV=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_JFFS2=y -# CONFIG_MMC is not set -CONFIG_MTD_NOR_FLASH=y -# CONFIG_PCI is not set -CONFIG_OF_LIBFDT=y diff --git a/configs/aria_defconfig b/configs/aria_defconfig deleted file mode 100644 index 0613dd16fb..0000000000 --- a/configs/aria_defconfig +++ /dev/null @@ -1,16 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC512X=y -CONFIG_TARGET_ARIA=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_BOOTDELAY=5 -CONFIG_HUSH_PARSER=y -CONFIG_CMD_ASKENV=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_JFFS2=y -# CONFIG_MMC is not set -CONFIG_MTD_NOR_FLASH=y -# CONFIG_PCI is not set -CONFIG_OF_LIBFDT=y diff --git a/configs/cam5200_defconfig b/configs/cam5200_defconfig deleted file mode 100644 index d8a419cda2..0000000000 --- a/configs/cam5200_defconfig +++ /dev/null @@ -1,23 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC5xxx=y -CONFIG_TARGET_TQM5200=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_SYS_EXTRA_OPTIONS="CAM5200,TQM5200S,TQM5200_B" -CONFIG_BOOTDELAY=5 -CONFIG_HUSH_PARSER=y -CONFIG_CMD_ASKENV=y -CONFIG_LOOPW=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_SNTP=y -CONFIG_CMD_BSP=y -CONFIG_CMD_JFFS2=y -CONFIG_MAC_PARTITION=y -CONFIG_DOS_PARTITION=y -CONFIG_ISO_PARTITION=y -# CONFIG_MMC is not set -CONFIG_MTD_NOR_FLASH=y -# CONFIG_PCI is not set -CONFIG_OF_LIBFDT=y diff --git a/configs/cam5200_niosflash_defconfig b/configs/cam5200_niosflash_defconfig deleted file mode 100644 index d7577a44ff..0000000000 --- a/configs/cam5200_niosflash_defconfig +++ /dev/null @@ -1,23 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC5xxx=y -CONFIG_TARGET_TQM5200=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_SYS_EXTRA_OPTIONS="CAM5200,TQM5200S,TQM5200_B,CAM5200_NIOSFLASH" -CONFIG_BOOTDELAY=5 -CONFIG_HUSH_PARSER=y -CONFIG_CMD_ASKENV=y -CONFIG_LOOPW=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_SNTP=y -CONFIG_CMD_BSP=y -CONFIG_CMD_JFFS2=y -CONFIG_MAC_PARTITION=y -CONFIG_DOS_PARTITION=y -CONFIG_ISO_PARTITION=y -# CONFIG_MMC is not set -CONFIG_MTD_NOR_FLASH=y -# CONFIG_PCI is not set -CONFIG_OF_LIBFDT=y diff --git a/configs/canmb_defconfig b/configs/canmb_defconfig deleted file mode 100644 index 87eb205d0c..0000000000 --- a/configs/canmb_defconfig +++ /dev/null @@ -1,14 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC5xxx=y -CONFIG_CMD_IMMAP=y -CONFIG_TARGET_CANMB=y -CONFIG_BOOTDELAY=5 -CONFIG_CMD_ASKENV=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_SNTP=y -CONFIG_CMD_DATE=y -# CONFIG_MMC is not set -CONFIG_MTD_NOR_FLASH=y -# CONFIG_PCI is not set diff --git a/configs/charon_defconfig b/configs/charon_defconfig deleted file mode 100644 index 2e4ad658e0..0000000000 --- a/configs/charon_defconfig +++ /dev/null @@ -1,32 +0,0 @@ -CONFIG_PPC=y -CONFIG_VIDEO=y -CONFIG_MPC5xxx=y -CONFIG_TARGET_CHARON=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_BOOTDELAY=5 -# CONFIG_CONSOLE_MUX is not set -CONFIG_SYS_CONSOLE_IS_IN_ENV=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_ASKENV=y -CONFIG_LOOPW=y -CONFIG_CMD_IDE=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_SNTP=y -CONFIG_CMD_BMP=y -CONFIG_CMD_BSP=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_CMD_JFFS2=y -CONFIG_CMD_DIAG=y -CONFIG_MAC_PARTITION=y -CONFIG_ISO_PARTITION=y -# CONFIG_MMC is not set -CONFIG_MTD_NOR_FLASH=y -CONFIG_USB=y -CONFIG_USB_STORAGE=y -CONFIG_CONSOLE_EXTRA_INFO=y -CONFIG_OF_LIBFDT=y diff --git a/configs/cm5200_defconfig b/configs/cm5200_defconfig deleted file mode 100644 index 860d23e553..0000000000 --- a/configs/cm5200_defconfig +++ /dev/null @@ -1,28 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC5xxx=y -CONFIG_TARGET_CM5200=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_BOOTDELAY=5 -CONFIG_SILENT_CONSOLE=y -CONFIG_CMD_ASKENV=y -CONFIG_LOOPW=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_SNTP=y -CONFIG_CMD_BSP=y -CONFIG_CMD_DATE=y -CONFIG_CMD_FAT=y -CONFIG_CMD_JFFS2=y -CONFIG_CMD_DIAG=y -CONFIG_MAC_PARTITION=y -CONFIG_ISO_PARTITION=y -# CONFIG_MMC is not set -CONFIG_MTD_NOR_FLASH=y -# CONFIG_PCI is not set -CONFIG_BAUDRATE=57600 -CONFIG_USB=y -CONFIG_USB_STORAGE=y -CONFIG_OF_LIBFDT=y diff --git a/configs/digsy_mtc_RAMBOOT_defconfig b/configs/digsy_mtc_RAMBOOT_defconfig deleted file mode 100644 index cda75d6e03..0000000000 --- a/configs/digsy_mtc_RAMBOOT_defconfig +++ /dev/null @@ -1,31 +0,0 @@ -CONFIG_PPC=y -CONFIG_VIDEO=y -CONFIG_MPC5xxx=y -CONFIG_TARGET_DIGSY_MTC=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0x00100000" -CONFIG_BOOTDELAY=1 -# CONFIG_CONSOLE_MUX is not set -CONFIG_SYS_CONSOLE_IS_IN_ENV=y -CONFIG_HUSH_PARSER=y -CONFIG_AUTOBOOT_KEYED=y -CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" -CONFIG_AUTOBOOT_DELAY_STR="d" -CONFIG_AUTOBOOT_STOP_STR=" " -CONFIG_LOOPW=y -CONFIG_CMD_IDE=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_BMP=y -CONFIG_CMD_CACHE=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_CMD_DIAG=y -# CONFIG_MMC is not set -CONFIG_MTD_NOR_FLASH=y -CONFIG_USB=y -CONFIG_USB_STORAGE=y -CONFIG_OF_LIBFDT=y diff --git a/configs/digsy_mtc_defconfig b/configs/digsy_mtc_defconfig deleted file mode 100644 index da9cec81a3..0000000000 --- a/configs/digsy_mtc_defconfig +++ /dev/null @@ -1,29 +0,0 @@ -CONFIG_PPC=y -CONFIG_VIDEO=y -CONFIG_MPC5xxx=y -CONFIG_TARGET_DIGSY_MTC=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_BOOTDELAY=1 -# CONFIG_CONSOLE_MUX is not set -CONFIG_SYS_CONSOLE_IS_IN_ENV=y -CONFIG_HUSH_PARSER=y -CONFIG_AUTOBOOT_KEYED=y -CONFIG_AUTOBOOT_PROMPT="autoboot in %d seconds\n" -CONFIG_AUTOBOOT_DELAY_STR=" " -CONFIG_LOOPW=y -CONFIG_CMD_IDE=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_BMP=y -CONFIG_CMD_CACHE=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_CMD_DIAG=y -# CONFIG_MMC is not set -CONFIG_MTD_NOR_FLASH=y -CONFIG_USB=y -CONFIG_USB_STORAGE=y -CONFIG_OF_LIBFDT=y diff --git a/configs/digsy_mtc_rev5_RAMBOOT_defconfig b/configs/digsy_mtc_rev5_RAMBOOT_defconfig deleted file mode 100644 index 1bba630083..0000000000 --- a/configs/digsy_mtc_rev5_RAMBOOT_defconfig +++ /dev/null @@ -1,31 +0,0 @@ -CONFIG_PPC=y -CONFIG_VIDEO=y -CONFIG_MPC5xxx=y -CONFIG_TARGET_DIGSY_MTC=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0x00100000,DIGSY_REV5" -CONFIG_BOOTDELAY=1 -# CONFIG_CONSOLE_MUX is not set -CONFIG_SYS_CONSOLE_IS_IN_ENV=y -CONFIG_HUSH_PARSER=y -CONFIG_AUTOBOOT_KEYED=y -CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" -CONFIG_AUTOBOOT_DELAY_STR="d" -CONFIG_AUTOBOOT_STOP_STR=" " -CONFIG_LOOPW=y -CONFIG_CMD_IDE=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_BMP=y -CONFIG_CMD_CACHE=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_CMD_DIAG=y -# CONFIG_MMC is not set -CONFIG_MTD_NOR_FLASH=y -CONFIG_USB=y -CONFIG_USB_STORAGE=y -CONFIG_OF_LIBFDT=y diff --git a/configs/digsy_mtc_rev5_defconfig b/configs/digsy_mtc_rev5_defconfig deleted file mode 100644 index 3491fdd5f1..0000000000 --- a/configs/digsy_mtc_rev5_defconfig +++ /dev/null @@ -1,31 +0,0 @@ -CONFIG_PPC=y -CONFIG_VIDEO=y -CONFIG_MPC5xxx=y -CONFIG_TARGET_DIGSY_MTC=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_SYS_EXTRA_OPTIONS="DIGSY_REV5" -CONFIG_BOOTDELAY=1 -# CONFIG_CONSOLE_MUX is not set -CONFIG_SYS_CONSOLE_IS_IN_ENV=y -CONFIG_HUSH_PARSER=y -CONFIG_AUTOBOOT_KEYED=y -CONFIG_AUTOBOOT_PROMPT="Press SPACE to abort autoboot in %d seconds\n" -CONFIG_AUTOBOOT_DELAY_STR="d" -CONFIG_AUTOBOOT_STOP_STR=" " -CONFIG_LOOPW=y -CONFIG_CMD_IDE=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_BMP=y -CONFIG_CMD_CACHE=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_CMD_DIAG=y -# CONFIG_MMC is not set -CONFIG_MTD_NOR_FLASH=y -CONFIG_USB=y -CONFIG_USB_STORAGE=y -CONFIG_OF_LIBFDT=y diff --git a/configs/fo300_defconfig b/configs/fo300_defconfig deleted file mode 100644 index 24470f311a..0000000000 --- a/configs/fo300_defconfig +++ /dev/null @@ -1,35 +0,0 @@ -CONFIG_PPC=y -CONFIG_VIDEO=y -CONFIG_MPC5xxx=y -CONFIG_TARGET_TQM5200=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_SYS_EXTRA_OPTIONS="FO300" -CONFIG_BOOTDELAY=5 -CONFIG_SILENT_CONSOLE=y -# CONFIG_CONSOLE_MUX is not set -CONFIG_SYS_CONSOLE_IS_IN_ENV=y -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_ASKENV=y -CONFIG_LOOPW=y -CONFIG_CMD_IDE=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_SNTP=y -CONFIG_CMD_BMP=y -CONFIG_CMD_BSP=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_CMD_JFFS2=y -CONFIG_CMD_DIAG=y -CONFIG_MAC_PARTITION=y -CONFIG_ISO_PARTITION=y -# CONFIG_MMC is not set -CONFIG_MTD_NOR_FLASH=y -# CONFIG_PCI is not set -CONFIG_USB=y -CONFIG_USB_STORAGE=y -CONFIG_OF_LIBFDT=y diff --git a/configs/inka4x0_defconfig b/configs/inka4x0_defconfig deleted file mode 100644 index c263cf61c5..0000000000 --- a/configs/inka4x0_defconfig +++ /dev/null @@ -1,19 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC5xxx=y -CONFIG_TARGET_INKA4X0=y -CONFIG_BOOTDELAY=1 -CONFIG_LOOPW=y -CONFIG_CMD_IDE=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_PING=y -CONFIG_CMD_SNTP=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_MAC_PARTITION=y -CONFIG_ISO_PARTITION=y -# CONFIG_MMC is not set -CONFIG_MTD_NOR_FLASH=y -CONFIG_USB=y -CONFIG_USB_STORAGE=y diff --git a/configs/ipek01_defconfig b/configs/ipek01_defconfig deleted file mode 100644 index f86170d346..0000000000 --- a/configs/ipek01_defconfig +++ /dev/null @@ -1,23 +0,0 @@ -CONFIG_PPC=y -CONFIG_VIDEO=y -CONFIG_MPC5xxx=y -CONFIG_TARGET_IPEK01=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_BOOTDELAY=5 -# CONFIG_CONSOLE_MUX is not set -CONFIG_SYS_CONSOLE_IS_IN_ENV=y -CONFIG_LOOPW=y -CONFIG_CMD_IDE=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_BMP=y -CONFIG_CMD_FAT=y -CONFIG_CMD_IRQ=y -# CONFIG_MMC is not set -CONFIG_MTD_NOR_FLASH=y -CONFIG_USB=y -CONFIG_USB_STORAGE=y -CONFIG_CONSOLE_EXTRA_INFO=y -CONFIG_OF_LIBFDT=y diff --git a/configs/jupiter_defconfig b/configs/jupiter_defconfig deleted file mode 100644 index 8e4e44702d..0000000000 --- a/configs/jupiter_defconfig +++ /dev/null @@ -1,14 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC5xxx=y -CONFIG_TARGET_JUPITER=y -CONFIG_BOOTDELAY=5 -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_HUSH_PARSER=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_SNTP=y -CONFIG_MAC_PARTITION=y -CONFIG_DOS_PARTITION=y -CONFIG_ISO_PARTITION=y -# CONFIG_MMC is not set -CONFIG_MTD_NOR_FLASH=y -# CONFIG_PCI is not set diff --git a/configs/mecp5123_defconfig b/configs/mecp5123_defconfig deleted file mode 100644 index 3937fe8b44..0000000000 --- a/configs/mecp5123_defconfig +++ /dev/null @@ -1,19 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC512X=y -CONFIG_TARGET_MECP5123=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_BOOTDELAY=5 -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_ASKENV=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_FAT=y -CONFIG_CMD_JFFS2=y -# CONFIG_MMC is not set -CONFIG_MTD_NOR_FLASH=y -# CONFIG_PCI is not set -CONFIG_BAUDRATE=9600 -CONFIG_OF_LIBFDT=y diff --git a/configs/motionpro_defconfig b/configs/motionpro_defconfig deleted file mode 100644 index c4006bca5f..0000000000 --- a/configs/motionpro_defconfig +++ /dev/null @@ -1,33 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC5xxx=y -CONFIG_CMD_IMMAP=y -CONFIG_TARGET_MOTIONPRO=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_VERSION_VARIABLE=y -CONFIG_HUSH_PARSER=y -CONFIG_AUTOBOOT_KEYED=y -CONFIG_AUTOBOOT_PROMPT="Autobooting in %d seconds, press "<Esc><Esc>" to stop\n" -CONFIG_AUTOBOOT_STOP_STR="\x1b\x1b" -CONFIG_CMD_ASKENV=y -CONFIG_CMD_IDE=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_FAT=y -CONFIG_CMD_JFFS2=y -CONFIG_CMD_BEDBUG=y -CONFIG_LED_STATUS=y -CONFIG_LED_STATUS0=y -CONFIG_LED_STATUS_BIT=0 -CONFIG_LED_STATUS_STATE=1 -CONFIG_LED_STATUS_FREQ=10 -CONFIG_LED_STATUS1=y -CONFIG_LED_STATUS_BIT1=1 -CONFIG_LED_STATUS_FREQ1=10 -CONFIG_LED_STATUS_BOOT_ENABLE=y -CONFIG_LED_STATUS_BOOT=0 -# CONFIG_MMC is not set -CONFIG_MTD_NOR_FLASH=y -# CONFIG_PCI is not set -CONFIG_OF_LIBFDT=y diff --git a/configs/mpc5121ads_defconfig b/configs/mpc5121ads_defconfig deleted file mode 100644 index 5bb78076ad..0000000000 --- a/configs/mpc5121ads_defconfig +++ /dev/null @@ -1,25 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC512X=y -CONFIG_TARGET_MPC5121ADS=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_BOOTDELAY=5 -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_ASKENV=y -CONFIG_CMD_IDE=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_CMD_JFFS2=y -CONFIG_MAC_PARTITION=y -CONFIG_ISO_PARTITION=y -# CONFIG_MMC is not set -CONFIG_MTD_NOR_FLASH=y -CONFIG_USB=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_OF_LIBFDT=y diff --git a/configs/mpc5121ads_rev2_defconfig b/configs/mpc5121ads_rev2_defconfig deleted file mode 100644 index e28fa19227..0000000000 --- a/configs/mpc5121ads_rev2_defconfig +++ /dev/null @@ -1,27 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC512X=y -CONFIG_TARGET_MPC5121ADS=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_SYS_EXTRA_OPTIONS="MPC5121ADS_REV2" -CONFIG_BOOTDELAY=5 -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_HUSH_PARSER=y -CONFIG_CMD_ASKENV=y -CONFIG_CMD_IDE=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_CMD_JFFS2=y -CONFIG_MAC_PARTITION=y -CONFIG_ISO_PARTITION=y -# CONFIG_MMC is not set -CONFIG_MTD_NOR_FLASH=y -# CONFIG_PCI is not set -CONFIG_USB=y -CONFIG_USB_EHCI_HCD=y -CONFIG_USB_STORAGE=y -CONFIG_OF_LIBFDT=y diff --git a/configs/munices_defconfig b/configs/munices_defconfig deleted file mode 100644 index 0e2b188a51..0000000000 --- a/configs/munices_defconfig +++ /dev/null @@ -1,13 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC5xxx=y -CONFIG_CMD_IMMAP=y -CONFIG_TARGET_MUNICES=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_BOOTDELAY=5 -CONFIG_CMD_ASKENV=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_PING=y -# CONFIG_MMC is not set -CONFIG_MTD_NOR_FLASH=y -# CONFIG_PCI is not set -CONFIG_OF_LIBFDT=y diff --git a/configs/pcm030_LOWBOOT_defconfig b/configs/pcm030_LOWBOOT_defconfig deleted file mode 100644 index 0ef8750d66..0000000000 --- a/configs/pcm030_LOWBOOT_defconfig +++ /dev/null @@ -1,15 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC5xxx=y -CONFIG_TARGET_PCM030=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_SYS_EXTRA_OPTIONS="SYS_TEXT_BASE=0xFF000000" -CONFIG_BOOTDELAY=3 -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_JFFS2=y -# CONFIG_MMC is not set -CONFIG_MTD_NOR_FLASH=y -CONFIG_USB=y -CONFIG_USB_STORAGE=y -CONFIG_OF_LIBFDT=y diff --git a/configs/pcm030_defconfig b/configs/pcm030_defconfig deleted file mode 100644 index 3869991f9e..0000000000 --- a/configs/pcm030_defconfig +++ /dev/null @@ -1,15 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC5xxx=y -CONFIG_TARGET_PCM030=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_BOOTDELAY=3 -CONFIG_SYS_PROMPT="uboot> " -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_JFFS2=y -# CONFIG_MMC is not set -CONFIG_MTD_NOR_FLASH=y -CONFIG_USB=y -CONFIG_USB_STORAGE=y -CONFIG_OF_LIBFDT=y diff --git a/configs/pdm360ng_defconfig b/configs/pdm360ng_defconfig deleted file mode 100644 index 4ef0df1aa8..0000000000 --- a/configs/pdm360ng_defconfig +++ /dev/null @@ -1,23 +0,0 @@ -CONFIG_PPC=y -CONFIG_VIDEO=y -CONFIG_MPC512X=y -CONFIG_TARGET_PDM360NG=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_BOOTDELAY=5 -CONFIG_SILENT_CONSOLE=y -# CONFIG_CONSOLE_MUX is not set -CONFIG_HUSH_PARSER=y -CONFIG_CMD_ASKENV=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_BMP=y -# CONFIG_MMC is not set -CONFIG_MTD_NOR_FLASH=y -# CONFIG_PCI is not set -# CONFIG_VIDEO_SW_CURSOR is not set -CONFIG_OF_LIBFDT=y -CONFIG_FDT_FIXUP_PARTITIONS=y diff --git a/configs/v38b_defconfig b/configs/v38b_defconfig deleted file mode 100644 index c75e547b7f..0000000000 --- a/configs/v38b_defconfig +++ /dev/null @@ -1,27 +0,0 @@ -CONFIG_PPC=y -CONFIG_MPC5xxx=y -CONFIG_TARGET_V38B=y -CONFIG_BOOTDELAY=3 -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_CMD_IDE=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_FAT=y -CONFIG_CMD_JFFS2=y -CONFIG_CMD_DIAG=y -CONFIG_CMD_IRQ=y -CONFIG_MAC_PARTITION=y -CONFIG_LED_STATUS=y -CONFIG_LED_STATUS0=y -CONFIG_LED_STATUS_BIT=16 -CONFIG_LED_STATUS_STATE=1 -CONFIG_LED_STATUS_BOOT_ENABLE=y -CONFIG_LED_STATUS_BOOT=0 -# CONFIG_MMC is not set -CONFIG_MTD_NOR_FLASH=y -# CONFIG_PCI is not set -CONFIG_USB=y -CONFIG_USB_STORAGE=y diff --git a/doc/README.generic_usb_ohci b/doc/README.generic_usb_ohci index ba7cea83ca..61300c3575 100644 --- a/doc/README.generic_usb_ohci +++ b/doc/README.generic_usb_ohci @@ -36,8 +36,8 @@ Endianness issues ------------------
The USB bus operates in little endian, but unfortunately there are -OHCI controllers that operate in big endian such as ppc4xx and -mpc5xxx. For these the config option +OHCI controllers that operate in big endian such as ppc4xx. For these the +config option
CONFIG_SYS_OHCI_BE_CONTROLLER
diff --git a/doc/README.scrapyard b/doc/README.scrapyard index 200f670806..e43e3c0fa9 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -106,13 +106,9 @@ sbc35_a9g20 arm arm926ejs f6b42c14 2015-05-13 Albin Tonner sc3 powerpc ppc4xx 27e72156 2015-05-10 Heiko Schocher hs@denx.de T4240EMU powerpc mpc85xx 7fc63cca 2015-05-05 York Sun yorksun@freescale.com korat powerpc ppc4xx 5043045d 2015-03-17 Larry Johnson lrj@acm.org -galaxy5200 powerpc mpc5xxx 41eb4e5c 2015-03-17 Eric Millbrandt emillbrandt@dekaresearch.com W7OLMC powerpc ppc4xx 6beecd5d 2015-03-17 Erik Theisen etheisen@mindspring.com W7OLMG powerpc ppc4xx 6beecd5d 2015-03-17 Erik Theisen etheisen@mindspring.com -aev powerpc mpc5xxx 470ee8b1 2015-03-17 -TB5200 powerpc mpc5xxx 470ee8b1 2015-03-17 JSE powerpc ppc4xx 2da8137b 2015-03-17 Stephen Williams steve@icarus.com -BC3450 powerpc mpc5xxx f8296d69 2015-03-17 hawkboard arm arm926ejs cb957cda 2015-02-24 Syed Mohammed Khasim sm.khasim@gmail.com:Sughosh Ganu urwithsughosh@gmail.com tnetv107x arm arm1176 50b82c4b 2015-02-24 Chan-Taek Park c-park@ti.com a320evb arm arm920t 29fc6f24 2015-02-24 Po-Yu Chuang ratbert@faraday-tech.com @@ -120,13 +116,6 @@ cm4008 arm arm920t a2f39e83 2015-02-24 Greg Ungerer cm41xx arm arm920t a2f39e83 2015-02-24 dkb arm arm926ejs 346cfba4 2015-02-24 Lei Wen leiwen@marvell.com jadecpu arm arm926ejs 41fbbbbc 2015-02-24 Matthias Weisser weisserm@arcor.de -icecube_5200 powerpc mpc5xxx 37b608a5 2015-01-23 Wolfgang Denk wd@denx.de -Lite5200 powerpc mpc5xxx 37b608a5 2015-01-23 -cpci5200 powerpc mpc5xxx 37b608a5 2015-01-23 Reinhard Arlt reinhard.arlt@esd-electronics.com -mecp5200 powerpc mpc5xxx 37b608a5 2015-01-23 Reinhard Arlt reinhard.arlt@esd-electronics.com -pf5200 powerpc mpc5xxx 37b608a5 2015-01-23 Reinhard Arlt reinhard.arlt@esd-electronics.com -PM520 powerpc mpc5xxx a258e732 2015-01-23 Josef Wagner Wagner@Microsys.de -Total5200 powerpc mpc5xxx ad734f7d 2015-01-23 CATcenter powerpc ppc4xx 5344cc1a 2015-01-23 PPChameleonEVB powerpc ppc4xx 5344cc1a 2015-01-23 Andrea "llandre" Marson andrea.marson@dave-tech.it P2020DS powerpc mpc85xx 168dcc6c 2015-01-23 @@ -200,9 +189,6 @@ SPD823TS powerpc mpc8xx 72ba368f 2015-01-05 Wolfgang Den KUP4K powerpc mpc8xx 4317d070 2015-01-05 Klaus Heydeck heydeck@kieback-peter.de KUP4X powerpc mpc8xx 4317d070 2015-01-05 Klaus Heydeck heydeck@kieback-peter.de ELPT860 powerpc mpc8xx 3c5b20f1 2015-01-05 The LEOX team team@leox.org -hmi1001 powerpc mpc5xxx ceaf499b 2015-01-05 -mucmc52 powerpc mpc5xxx ceaf499b 2015-01-05 Heiko Schocher hs@denx.de -uc101 powerpc mpc5xxx ceaf499b 2015-01-05 Heiko Schocher hs@denx.de uc100 powerpc mpc8xx ceaf499b 2015-01-05 Stefan Roese sr@denx.de FPS850L powerpc mpc8xx 5d2a5ef7 2015-01-05 Wolfgang Denk wd@denx.de FPS860L powerpc mpc8xx 5d2a5ef7 2015-01-05 Wolfgang Denk wd@denx.de @@ -211,9 +197,6 @@ SM850 powerpc mpc8xx 5d2a5ef7 2015-01-05 Wolfgang Den TK885D powerpc mpc8xx 5d2a5ef7 2015-01-05 virtlab2 powerpc mpc8xx 5d2a5ef7 2015-01-05 Wolfgang Denk wd@denx.de hermes powerpc mpc8xx 36da51e 2014-12-08 Wolfgang Denk wd@denx.de -PRS200 powerpc mpc5200 ecfdcee 2014-11-12 -MCC200 powerpc mpc5200 ecfdcee 2014-11-12 -TOP5200 powerpc mpc5200 d58a945 2014-10-28 Reinhard Meyer reinhard.meyer@emk-elektronik.de TOP860 powerpc mpc860 d58a945 2014-10-28 Reinhard Meyer reinhard.meyer@emk-elektronik.de TOP9000 arm at91sam9xeXXX d58a945 2014-10-28 Reinhard Meyer reinhard.meyer@emk-elektronik.de TQM8272 powerpc mpc8260 f06f9a1 2014-10-27 Wolfgang Denk wd@denx.de @@ -228,8 +211,6 @@ DB64360 powerpc 74xx_7xx 03b0040 2014-10-27 DB64460 powerpc 74xx_7xx 03b0040 2014-10-27 p3m750 powerpc 74xx_7xx 03b0040 2014-10-27 Stefan Roese sr@denx.de p3m7448 powerpc 74xx_7xx 03b0040 2014-10-27 Stefan Roese sr@denx.de -MVBC_P powerpc mpc5xxx af55e35 2014-10-10 Andre Schwarz andre.schwarz@matrix-vision.de -MVSMR powerpc mpc5xxx af55e35 2014-10-10 Andre Schwarz andre.schwarz@matrix-vision.de MERGERBOX powerpc mpc83xx e7a5656 2014-10-10 Andre Schwarz andre.schwarz@matrix-vision.de MVBLM7 powerpc mpc83xx e7a5656 2014-10-10 Andre Schwarz andre.schwarz@matrix-vision.de bluestone powerpc ppc4xx 9ed3246 2014-10-10 Tirumala Marri tmarri@apm.com @@ -373,8 +354,6 @@ CP850 powerpc MPC852 333d86d 2010-10-19 Wolfgang Den logodl ARM PXA2xx 059e778 2010-10-18 August Hoeraendl august.hoerandl@gmx.at CCM powerpc MPC860 dff07e1 2010-10-06 Wolfgang Grandegger wg@denx.de PCU_E powerpc MPC860T 544d97e 2010-10-06 Wolfgang Denk wd@denx.de -spieval powerpc MPC5200 69434e4 2010-09-19 -smmaco4 powerpc MPC5200 9ddc3af 2010-09-19 HMI10 powerpc MPC823 77efe35 2010-09-19 Wolfgang Denk wd@denx.de GTH powerpc MPC860 0fe247b 2010-07-17 Thomas Lange thomas@corelatus.se AmigaOneG3SE powerpc 74xx_7xx 953b7e6 2010-06-23 diff --git a/doc/README.serial_multi b/doc/README.serial_multi index ad61d4261b..c9049fd01d 100644 --- a/doc/README.serial_multi +++ b/doc/README.serial_multi @@ -52,29 +52,3 @@ PPC4XX Specific setenv stdout serial0 setenv stderr serial0 setenv stdin serial0 - -MPC5xxx Specific -================ - -Up to two PSCs can be used as console. - -Support for hardware handshake has not been implemented yet. - -*) The first (default) console port is defined by: - #define CONFIG_PSC_CONSOLE <PSC number> - -*) The second (alternative) console port is defined by: - #define CONFIG_PSC_CONSOLE2 <PSC number> - -*) Commands to switch to the second console: - setenv stdout serial1 - setenv stderr serial1 - setenv stdin serial1 - -*) Commands to switch to the first console: - setenv stdout serial0 - setenv stderr serial0 - setenv stdin serial0 - -*) If a file descriptor is set to "serial" then the - current serial device will be used. diff --git a/drivers/bootcount/bootcount.c b/drivers/bootcount/bootcount.c index 38f8653603..8c1d10e26e 100644 --- a/drivers/bootcount/bootcount.c +++ b/drivers/bootcount/bootcount.c @@ -14,16 +14,6 @@ */ #if !defined(CONFIG_SYS_BOOTCOUNT_ADDR)
-#if defined(CONFIG_MPC5xxx) -#define CONFIG_SYS_BOOTCOUNT_ADDR (MPC5XXX_CDM_BRDCRMB) -#define CONFIG_SYS_BOOTCOUNT_SINGLEWORD -#endif /* defined(CONFIG_MPC5xxx) */ - -#if defined(CONFIG_MPC512X) -#define CONFIG_SYS_BOOTCOUNT_ADDR (&((immap_t *)CONFIG_SYS_IMMR)->clk.bcr) -#define CONFIG_SYS_BOOTCOUNT_SINGLEWORD -#endif /* defined(CONFIG_MPC512X) */ - #if defined(CONFIG_8xx) #define CONFIG_SYS_BOOTCOUNT_ADDR (((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_dpmem + \ CPM_BOOTCOUNT_ADDR) diff --git a/drivers/input/keyboard.c b/drivers/input/keyboard.c index 7af5868dea..84ee015cb3 100644 --- a/drivers/input/keyboard.c +++ b/drivers/input/keyboard.c @@ -20,7 +20,7 @@ static struct input_config config;
static int kbd_read_keys(struct input_config *config) { -#if defined(CONFIG_MPC5xxx) || defined(CONFIG_ARCH_MPC8540) || \ +#if defined(CONFIG_ARCH_MPC8540) || \ defined(CONFIG_ARCH_MPC8541) || defined(CONFIG_ARCH_MPC8555) /* no ISR is used, so received chars must be polled */ ps2ser_check(); diff --git a/drivers/input/ps2ser.c b/drivers/input/ps2ser.c index bcbe52af15..0b5ce06853 100644 --- a/drivers/input/ps2ser.c +++ b/drivers/input/ps2ser.c @@ -29,25 +29,6 @@ DECLARE_GLOBAL_DATA_PTR;
#define PS2SER_BAUD 57600
-#ifdef CONFIG_MPC5xxx -#if CONFIG_PS2SERIAL == 1 -#define PSC_BASE MPC5XXX_PSC1 -#elif CONFIG_PS2SERIAL == 2 -#define PSC_BASE MPC5XXX_PSC2 -#elif CONFIG_PS2SERIAL == 3 -#define PSC_BASE MPC5XXX_PSC3 -#elif CONFIG_PS2SERIAL == 4 -#define PSC_BASE MPC5XXX_PSC4 -#elif CONFIG_PS2SERIAL == 5 -#define PSC_BASE MPC5XXX_PSC5 -#elif CONFIG_PS2SERIAL == 6 -#define PSC_BASE MPC5XXX_PSC6 -#else -#error CONFIG_PS2SERIAL must be in 1 ... 6 -#endif - -#else - #if CONFIG_PS2SERIAL == 1 #define COM_BASE (CONFIG_SYS_CCSRBAR+0x4500) #elif CONFIG_PS2SERIAL == 2 @@ -56,8 +37,6 @@ DECLARE_GLOBAL_DATA_PTR; #error CONFIG_PS2SERIAL must be in 1 ... 2 #endif
-#endif /* CONFIG_MPC5xxx / other */ - static int ps2ser_getc_hw(void); static void ps2ser_interrupt(void *dev_id);
@@ -68,45 +47,6 @@ static atomic_t ps2buf_cnt; static int ps2buf_in_idx; static int ps2buf_out_idx;
-#ifdef CONFIG_MPC5xxx -int ps2ser_init(void) -{ - volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE; - unsigned long baseclk; - int div; - - /* reset PSC */ - psc->command = PSC_SEL_MODE_REG_1; - - /* select clock sources */ - psc->psc_clock_select = 0; - baseclk = (gd->arch.ipb_clk + 16) / 32; - - /* switch to UART mode */ - psc->sicr = 0; - - /* configure parity, bit length and so on */ - psc->mode = PSC_MODE_8_BITS | PSC_MODE_PARNONE; - psc->mode = PSC_MODE_ONE_STOP; - - /* set up UART divisor */ - div = (baseclk + (PS2SER_BAUD/2)) / PS2SER_BAUD; - psc->ctur = (div >> 8) & 0xff; - psc->ctlr = div & 0xff; - - /* disable all interrupts */ - psc->psc_imr = 0; - - /* reset and enable Rx/Tx */ - psc->command = PSC_RST_RX; - psc->command = PSC_RST_TX; - psc->command = PSC_RX_ENABLE | PSC_TX_ENABLE; - - return (0); -} - -#else - int ps2ser_init(void) { NS16550_t com_port = (NS16550_t)COM_BASE; @@ -122,45 +62,23 @@ int ps2ser_init(void) return (0); }
-#endif /* CONFIG_MPC5xxx / other */ - void ps2ser_putc(int chr) { -#ifdef CONFIG_MPC5xxx - volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE; -#else NS16550_t com_port = (NS16550_t)COM_BASE; -#endif debug(">>>> 0x%02x\n", chr);
-#ifdef CONFIG_MPC5xxx - while (!(psc->psc_status & PSC_SR_TXRDY)); - - psc->psc_buffer_8 = chr; -#else while ((com_port->lsr & UART_LSR_THRE) == 0); com_port->thr = chr; -#endif }
static int ps2ser_getc_hw(void) { -#ifdef CONFIG_MPC5xxx - volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE; -#else NS16550_t com_port = (NS16550_t)COM_BASE; -#endif int res = -1;
-#ifdef CONFIG_MPC5xxx - if (psc->psc_status & PSC_SR_RXRDY) { - res = (psc->psc_buffer_8); - } -#else if (com_port->lsr & UART_LSR_DR) { res = com_port->rbr; } -#endif
return res; } @@ -206,21 +124,13 @@ int ps2ser_check(void)
static void ps2ser_interrupt(void *dev_id) { -#ifdef CONFIG_MPC5xxx - volatile struct mpc5xxx_psc *psc = (struct mpc5xxx_psc *)PSC_BASE; -#else NS16550_t com_port = (NS16550_t)COM_BASE; -#endif int chr; int status;
do { chr = ps2ser_getc_hw(); -#ifdef CONFIG_MPC5xxx - status = psc->psc_status; -#else status = com_port->lsr; -#endif if (chr < 0) continue;
if (atomic_read(&ps2buf_cnt) < PS2BUF_SIZE) { @@ -230,11 +140,7 @@ static void ps2ser_interrupt(void *dev_id) } else { printf ("ps2ser.c: buffer overflow\n"); } -#ifdef CONFIG_MPC5xxx - } while (status & PSC_SR_RXRDY); -#else } while (status & UART_LSR_DR); -#endif if (atomic_read(&ps2buf_cnt)) { ps2mult_callback(atomic_read(&ps2buf_cnt)); } diff --git a/drivers/misc/fsl_iim.c b/drivers/misc/fsl_iim.c index 2feb1823e4..3c9f029eda 100644 --- a/drivers/misc/fsl_iim.c +++ b/drivers/misc/fsl_iim.c @@ -13,9 +13,7 @@ #include <fuse.h> #include <linux/errno.h> #include <asm/io.h> -#ifndef CONFIG_MPC512X #include <asm/arch/imx-regs.h> -#endif #if defined(CONFIG_MX51) || defined(CONFIG_MX53) #include <asm/arch/clock.h> #endif diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index a7b76f4218..ce8ba99c82 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -33,11 +33,11 @@ config NAND_DENALI_SPARE_AREA_SKIP_BYTES used to preserve the bad block marker in the OOB area.
config NAND_VF610_NFC - bool "Support for Freescale NFC for VF610/MPC5125" + bool "Support for Freescale NFC for VF610" select SYS_NAND_SELF_INIT help Enables support for NAND Flash Controller on some Freescale - processors like the VF610, MPC5125, MCF54418 or Kinetis K70. + processors like the VF610, MCF54418 or Kinetis K70. The driver supports a maximum 2k page size. The driver currently does not support hardware ECC.
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index 5d5f9f5267..c3d4a996f3 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -53,7 +53,6 @@ obj-$(CONFIG_NAND_KIRKWOOD) += kirkwood_nand.o obj-$(CONFIG_NAND_KMETER1) += kmeter1_nand.o obj-$(CONFIG_NAND_LPC32XX_MLC) += lpc32xx_nand_mlc.o obj-$(CONFIG_NAND_LPC32XX_SLC) += lpc32xx_nand_slc.o -obj-$(CONFIG_NAND_MPC5121_NFC) += mpc5121_nfc.o obj-$(CONFIG_NAND_VF610_NFC) += vf610_nfc.o obj-$(CONFIG_NAND_MXC) += mxc_nand.o obj-$(CONFIG_NAND_MXS) += mxs_nand.o diff --git a/drivers/mtd/nand/mpc5121_nfc.c b/drivers/mtd/nand/mpc5121_nfc.c deleted file mode 100644 index 7faabddbf2..0000000000 --- a/drivers/mtd/nand/mpc5121_nfc.c +++ /dev/null @@ -1,656 +0,0 @@ -/* - * Copyright 2004-2008 Freescale Semiconductor, Inc. - * Copyright 2009 Semihalf. - * (C) Copyright 2009 Stefan Roese sr@denx.de - * - * Based on original driver from Freescale Semiconductor - * written by John Rigby jrigby@freescale.com on basis - * of drivers/mtd/nand/mxc_nand.c. Reworked and extended - * Piotr Ziecik kosmo@semihalf.com. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <malloc.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/nand.h> -#include <linux/mtd/nand_ecc.h> -#include <linux/compat.h> - -#include <linux/errno.h> -#include <asm/io.h> -#include <asm/processor.h> -#include <nand.h> - -#define DRV_NAME "mpc5121_nfc" - -/* Timeouts */ -#define NFC_RESET_TIMEOUT 1000 /* 1 ms */ -#define NFC_TIMEOUT 2000 /* 2000 us */ - -/* Addresses for NFC MAIN RAM BUFFER areas */ -#define NFC_MAIN_AREA(n) ((n) * 0x200) - -/* Addresses for NFC SPARE BUFFER areas */ -#define NFC_SPARE_BUFFERS 8 -#define NFC_SPARE_LEN 0x40 -#define NFC_SPARE_AREA(n) (0x1000 + ((n) * NFC_SPARE_LEN)) - -/* MPC5121 NFC registers */ -#define NFC_BUF_ADDR 0x1E04 -#define NFC_FLASH_ADDR 0x1E06 -#define NFC_FLASH_CMD 0x1E08 -#define NFC_CONFIG 0x1E0A -#define NFC_ECC_STATUS1 0x1E0C -#define NFC_ECC_STATUS2 0x1E0E -#define NFC_SPAS 0x1E10 -#define NFC_WRPROT 0x1E12 -#define NFC_NF_WRPRST 0x1E18 -#define NFC_CONFIG1 0x1E1A -#define NFC_CONFIG2 0x1E1C -#define NFC_UNLOCKSTART_BLK0 0x1E20 -#define NFC_UNLOCKEND_BLK0 0x1E22 -#define NFC_UNLOCKSTART_BLK1 0x1E24 -#define NFC_UNLOCKEND_BLK1 0x1E26 -#define NFC_UNLOCKSTART_BLK2 0x1E28 -#define NFC_UNLOCKEND_BLK2 0x1E2A -#define NFC_UNLOCKSTART_BLK3 0x1E2C -#define NFC_UNLOCKEND_BLK3 0x1E2E - -/* Bit Definitions: NFC_BUF_ADDR */ -#define NFC_RBA_MASK (7 << 0) -#define NFC_ACTIVE_CS_SHIFT 5 -#define NFC_ACTIVE_CS_MASK (3 << NFC_ACTIVE_CS_SHIFT) - -/* Bit Definitions: NFC_CONFIG */ -#define NFC_BLS_UNLOCKED (1 << 1) - -/* Bit Definitions: NFC_CONFIG1 */ -#define NFC_ECC_4BIT (1 << 0) -#define NFC_FULL_PAGE_DMA (1 << 1) -#define NFC_SPARE_ONLY (1 << 2) -#define NFC_ECC_ENABLE (1 << 3) -#define NFC_INT_MASK (1 << 4) -#define NFC_BIG_ENDIAN (1 << 5) -#define NFC_RESET (1 << 6) -#define NFC_CE (1 << 7) -#define NFC_ONE_CYCLE (1 << 8) -#define NFC_PPB_32 (0 << 9) -#define NFC_PPB_64 (1 << 9) -#define NFC_PPB_128 (2 << 9) -#define NFC_PPB_256 (3 << 9) -#define NFC_PPB_MASK (3 << 9) -#define NFC_FULL_PAGE_INT (1 << 11) - -/* Bit Definitions: NFC_CONFIG2 */ -#define NFC_COMMAND (1 << 0) -#define NFC_ADDRESS (1 << 1) -#define NFC_INPUT (1 << 2) -#define NFC_OUTPUT (1 << 3) -#define NFC_ID (1 << 4) -#define NFC_STATUS (1 << 5) -#define NFC_CMD_FAIL (1 << 15) -#define NFC_INT (1 << 15) - -/* Bit Definitions: NFC_WRPROT */ -#define NFC_WPC_LOCK_TIGHT (1 << 0) -#define NFC_WPC_LOCK (1 << 1) -#define NFC_WPC_UNLOCK (1 << 2) - -struct mpc5121_nfc_prv { - struct nand_chip chip; - int irq; - void __iomem *regs; - struct clk *clk; - uint column; - int spareonly; - int chipsel; -}; - -int mpc5121_nfc_chip = 0; - -static void mpc5121_nfc_done(struct mtd_info *mtd); - -/* Read NFC register */ -static inline u16 nfc_read(struct mtd_info *mtd, uint reg) -{ - struct nand_chip *chip = mtd_to_nand(mtd); - struct mpc5121_nfc_prv *prv = nand_get_controller_data(chip); - - return in_be16(prv->regs + reg); -} - -/* Write NFC register */ -static inline void nfc_write(struct mtd_info *mtd, uint reg, u16 val) -{ - struct nand_chip *chip = mtd_to_nand(mtd); - struct mpc5121_nfc_prv *prv = nand_get_controller_data(chip); - - out_be16(prv->regs + reg, val); -} - -/* Set bits in NFC register */ -static inline void nfc_set(struct mtd_info *mtd, uint reg, u16 bits) -{ - nfc_write(mtd, reg, nfc_read(mtd, reg) | bits); -} - -/* Clear bits in NFC register */ -static inline void nfc_clear(struct mtd_info *mtd, uint reg, u16 bits) -{ - nfc_write(mtd, reg, nfc_read(mtd, reg) & ~bits); -} - -/* Invoke address cycle */ -static inline void mpc5121_nfc_send_addr(struct mtd_info *mtd, u16 addr) -{ - nfc_write(mtd, NFC_FLASH_ADDR, addr); - nfc_write(mtd, NFC_CONFIG2, NFC_ADDRESS); - mpc5121_nfc_done(mtd); -} - -/* Invoke command cycle */ -static inline void mpc5121_nfc_send_cmd(struct mtd_info *mtd, u16 cmd) -{ - nfc_write(mtd, NFC_FLASH_CMD, cmd); - nfc_write(mtd, NFC_CONFIG2, NFC_COMMAND); - mpc5121_nfc_done(mtd); -} - -/* Send data from NFC buffers to NAND flash */ -static inline void mpc5121_nfc_send_prog_page(struct mtd_info *mtd) -{ - nfc_clear(mtd, NFC_BUF_ADDR, NFC_RBA_MASK); - nfc_write(mtd, NFC_CONFIG2, NFC_INPUT); - mpc5121_nfc_done(mtd); -} - -/* Receive data from NAND flash */ -static inline void mpc5121_nfc_send_read_page(struct mtd_info *mtd) -{ - nfc_clear(mtd, NFC_BUF_ADDR, NFC_RBA_MASK); - nfc_write(mtd, NFC_CONFIG2, NFC_OUTPUT); - mpc5121_nfc_done(mtd); -} - -/* Receive ID from NAND flash */ -static inline void mpc5121_nfc_send_read_id(struct mtd_info *mtd) -{ - nfc_clear(mtd, NFC_BUF_ADDR, NFC_RBA_MASK); - nfc_write(mtd, NFC_CONFIG2, NFC_ID); - mpc5121_nfc_done(mtd); -} - -/* Receive status from NAND flash */ -static inline void mpc5121_nfc_send_read_status(struct mtd_info *mtd) -{ - nfc_clear(mtd, NFC_BUF_ADDR, NFC_RBA_MASK); - nfc_write(mtd, NFC_CONFIG2, NFC_STATUS); - mpc5121_nfc_done(mtd); -} - -static void mpc5121_nfc_done(struct mtd_info *mtd) -{ - int max_retries = NFC_TIMEOUT; - - while (1) { - max_retries--; - if (nfc_read(mtd, NFC_CONFIG2) & NFC_INT) - break; - udelay(1); - } - - if (max_retries <= 0) - printk(KERN_WARNING DRV_NAME - ": Timeout while waiting for completion.\n"); -} - -/* Do address cycle(s) */ -static void mpc5121_nfc_addr_cycle(struct mtd_info *mtd, int column, int page) -{ - struct nand_chip *chip = mtd_to_nand(mtd); - u32 pagemask = chip->pagemask; - - if (column != -1) { - mpc5121_nfc_send_addr(mtd, column); - if (mtd->writesize > 512) - mpc5121_nfc_send_addr(mtd, column >> 8); - } - - if (page != -1) { - do { - mpc5121_nfc_send_addr(mtd, page & 0xFF); - page >>= 8; - pagemask >>= 8; - } while (pagemask); - } -} - -/* Control chip select signals */ - -/* - * Selecting the active device: - * - * This is different than the linux version. Switching between chips - * is done via board_nand_select_device(). The Linux select_chip - * function used here in U-Boot has only 2 valid chip numbers: - * 0 select - * -1 deselect - */ - -/* - * Implement it as a weak default, so that boards with a specific - * chip-select routine can use their own function. - */ -void __mpc5121_nfc_select_chip(struct mtd_info *mtd, int chip) -{ - if (chip < 0) { - nfc_clear(mtd, NFC_CONFIG1, NFC_CE); - return; - } - - nfc_clear(mtd, NFC_BUF_ADDR, NFC_ACTIVE_CS_MASK); - nfc_set(mtd, NFC_BUF_ADDR, (chip << NFC_ACTIVE_CS_SHIFT) & - NFC_ACTIVE_CS_MASK); - nfc_set(mtd, NFC_CONFIG1, NFC_CE); -} -void mpc5121_nfc_select_chip(struct mtd_info *mtd, int chip) - __attribute__((weak, alias("__mpc5121_nfc_select_chip"))); - -void board_nand_select_device(struct nand_chip *nand, int chip) -{ - /* - * Only save this chip number in global variable here. This - * will be used later in mpc5121_nfc_select_chip(). - */ - mpc5121_nfc_chip = chip; -} - -/* Read NAND Ready/Busy signal */ -static int mpc5121_nfc_dev_ready(struct mtd_info *mtd) -{ - /* - * NFC handles ready/busy signal internally. Therefore, this function - * always returns status as ready. - */ - return 1; -} - -/* Write command to NAND flash */ -static void mpc5121_nfc_command(struct mtd_info *mtd, unsigned command, - int column, int page) -{ - struct nand_chip *chip = mtd_to_nand(mtd); - struct mpc5121_nfc_prv *prv = nand_get_controller_data(chip); - - prv->column = (column >= 0) ? column : 0; - prv->spareonly = 0; - - switch (command) { - case NAND_CMD_PAGEPROG: - mpc5121_nfc_send_prog_page(mtd); - break; - /* - * NFC does not support sub-page reads and writes, - * so emulate them using full page transfers. - */ - case NAND_CMD_READ0: - column = 0; - break; - - case NAND_CMD_READ1: - prv->column += 256; - command = NAND_CMD_READ0; - column = 0; - break; - - case NAND_CMD_READOOB: - prv->spareonly = 1; - command = NAND_CMD_READ0; - column = 0; - break; - - case NAND_CMD_SEQIN: - mpc5121_nfc_command(mtd, NAND_CMD_READ0, column, page); - column = 0; - break; - - case NAND_CMD_ERASE1: - case NAND_CMD_ERASE2: - case NAND_CMD_READID: - case NAND_CMD_STATUS: - case NAND_CMD_RESET: - break; - - default: - return; - } - - mpc5121_nfc_send_cmd(mtd, command); - mpc5121_nfc_addr_cycle(mtd, column, page); - - switch (command) { - case NAND_CMD_READ0: - if (mtd->writesize > 512) - mpc5121_nfc_send_cmd(mtd, NAND_CMD_READSTART); - mpc5121_nfc_send_read_page(mtd); - break; - - case NAND_CMD_READID: - mpc5121_nfc_send_read_id(mtd); - break; - - case NAND_CMD_STATUS: - mpc5121_nfc_send_read_status(mtd); - if (chip->options & NAND_BUSWIDTH_16) - prv->column = 1; - else - prv->column = 0; - break; - } -} - -/* Copy data from/to NFC spare buffers. */ -static void mpc5121_nfc_copy_spare(struct mtd_info *mtd, uint offset, - u8 * buffer, uint size, int wr) -{ - struct nand_chip *nand = mtd_to_nand(mtd); - struct mpc5121_nfc_prv *prv = nand_get_controller_data(nand); - uint o, s, sbsize, blksize; - - /* - * NAND spare area is available through NFC spare buffers. - * The NFC divides spare area into (page_size / 512) chunks. - * Each chunk is placed into separate spare memory area, using - * first (spare_size / num_of_chunks) bytes of the buffer. - * - * For NAND device in which the spare area is not divided fully - * by the number of chunks, number of used bytes in each spare - * buffer is rounded down to the nearest even number of bytes, - * and all remaining bytes are added to the last used spare area. - * - * For more information read section 26.6.10 of MPC5121e - * Microcontroller Reference Manual, Rev. 3. - */ - - /* Calculate number of valid bytes in each spare buffer */ - sbsize = (mtd->oobsize / (mtd->writesize / 512)) & ~1; - - while (size) { - /* Calculate spare buffer number */ - s = offset / sbsize; - if (s > NFC_SPARE_BUFFERS - 1) - s = NFC_SPARE_BUFFERS - 1; - - /* - * Calculate offset to requested data block in selected spare - * buffer and its size. - */ - o = offset - (s * sbsize); - blksize = min(sbsize - o, size); - - if (wr) - memcpy_toio(prv->regs + NFC_SPARE_AREA(s) + o, - buffer, blksize); - else - memcpy_fromio(buffer, - prv->regs + NFC_SPARE_AREA(s) + o, - blksize); - - buffer += blksize; - offset += blksize; - size -= blksize; - }; -} - -/* Copy data from/to NFC main and spare buffers */ -static void mpc5121_nfc_buf_copy(struct mtd_info *mtd, u_char * buf, int len, - int wr) -{ - struct nand_chip *chip = mtd_to_nand(mtd); - struct mpc5121_nfc_prv *prv = nand_get_controller_data(chip); - uint c = prv->column; - uint l; - - /* Handle spare area access */ - if (prv->spareonly || c >= mtd->writesize) { - /* Calculate offset from beginning of spare area */ - if (c >= mtd->writesize) - c -= mtd->writesize; - - prv->column += len; - mpc5121_nfc_copy_spare(mtd, c, buf, len, wr); - return; - } - - /* - * Handle main area access - limit copy length to prevent - * crossing main/spare boundary. - */ - l = min((uint) len, mtd->writesize - c); - prv->column += l; - - if (wr) - memcpy_toio(prv->regs + NFC_MAIN_AREA(0) + c, buf, l); - else - memcpy_fromio(buf, prv->regs + NFC_MAIN_AREA(0) + c, l); - - /* Handle crossing main/spare boundary */ - if (l != len) { - buf += l; - len -= l; - mpc5121_nfc_buf_copy(mtd, buf, len, wr); - } -} - -/* Read data from NFC buffers */ -static void mpc5121_nfc_read_buf(struct mtd_info *mtd, u_char * buf, int len) -{ - mpc5121_nfc_buf_copy(mtd, buf, len, 0); -} - -/* Write data to NFC buffers */ -static void mpc5121_nfc_write_buf(struct mtd_info *mtd, - const u_char * buf, int len) -{ - mpc5121_nfc_buf_copy(mtd, (u_char *) buf, len, 1); -} - -/* Read byte from NFC buffers */ -static u8 mpc5121_nfc_read_byte(struct mtd_info *mtd) -{ - u8 tmp; - - mpc5121_nfc_read_buf(mtd, &tmp, sizeof(tmp)); - - return tmp; -} - -/* Read word from NFC buffers */ -static u16 mpc5121_nfc_read_word(struct mtd_info *mtd) -{ - u16 tmp; - - mpc5121_nfc_read_buf(mtd, (u_char *) & tmp, sizeof(tmp)); - - return tmp; -} - -/* - * Read NFC configuration from Reset Config Word - * - * NFC is configured during reset in basis of information stored - * in Reset Config Word. There is no other way to set NAND block - * size, spare size and bus width. - */ -static int mpc5121_nfc_read_hw_config(struct mtd_info *mtd) -{ - immap_t *im = (immap_t *)CONFIG_SYS_IMMR; - struct nand_chip *chip = mtd_to_nand(mtd); - uint rcw_pagesize = 0; - uint rcw_sparesize = 0; - uint rcw_width; - uint rcwh; - uint romloc, ps; - - rcwh = in_be32(&(im->reset.rcwh)); - - /* Bit 6: NFC bus width */ - rcw_width = ((rcwh >> 6) & 0x1) ? 2 : 1; - - /* Bit 7: NFC Page/Spare size */ - ps = (rcwh >> 7) & 0x1; - - /* Bits [22:21]: ROM Location */ - romloc = (rcwh >> 21) & 0x3; - - /* Decode RCW bits */ - switch ((ps << 2) | romloc) { - case 0x00: - case 0x01: - rcw_pagesize = 512; - rcw_sparesize = 16; - break; - case 0x02: - case 0x03: - rcw_pagesize = 4096; - rcw_sparesize = 128; - break; - case 0x04: - case 0x05: - rcw_pagesize = 2048; - rcw_sparesize = 64; - break; - case 0x06: - case 0x07: - rcw_pagesize = 4096; - rcw_sparesize = 218; - break; - } - - mtd->writesize = rcw_pagesize; - mtd->oobsize = rcw_sparesize; - if (rcw_width == 2) - chip->options |= NAND_BUSWIDTH_16; - - debug(KERN_NOTICE DRV_NAME ": Configured for " - "%u-bit NAND, page size %u with %u spare.\n", - rcw_width * 8, rcw_pagesize, rcw_sparesize); - return 0; -} - -int board_nand_init(struct nand_chip *chip) -{ - struct mpc5121_nfc_prv *prv; - struct mtd_info *mtd; - int resettime = 0; - int retval = 0; - int rev; - - /* - * Check SoC revision. This driver supports only NFC - * in MPC5121 revision 2. - */ - rev = (mfspr(SPRN_SVR) >> 4) & 0xF; - if (rev != 2) { - printk(KERN_ERR DRV_NAME - ": SoC revision %u is not supported!\n", rev); - return -ENXIO; - } - - prv = malloc(sizeof(*prv)); - if (!prv) { - printk(KERN_ERR DRV_NAME ": Memory exhausted!\n"); - return -ENOMEM; - } - - mtd = &chip->mtd; - nand_set_controller_data(chip, prv); - - /* Read NFC configuration from Reset Config Word */ - retval = mpc5121_nfc_read_hw_config(mtd); - if (retval) { - printk(KERN_ERR DRV_NAME ": Unable to read NFC config!\n"); - return retval; - } - - prv->regs = (void __iomem *)CONFIG_SYS_NAND_BASE; - chip->dev_ready = mpc5121_nfc_dev_ready; - chip->cmdfunc = mpc5121_nfc_command; - chip->read_byte = mpc5121_nfc_read_byte; - chip->read_word = mpc5121_nfc_read_word; - chip->read_buf = mpc5121_nfc_read_buf; - chip->write_buf = mpc5121_nfc_write_buf; - chip->select_chip = mpc5121_nfc_select_chip; - chip->bbt_options = NAND_BBT_USE_FLASH; - chip->ecc.mode = NAND_ECC_SOFT; - - /* Reset NAND Flash controller */ - nfc_set(mtd, NFC_CONFIG1, NFC_RESET); - while (nfc_read(mtd, NFC_CONFIG1) & NFC_RESET) { - if (resettime++ >= NFC_RESET_TIMEOUT) { - printk(KERN_ERR DRV_NAME - ": Timeout while resetting NFC!\n"); - retval = -EINVAL; - goto error; - } - - udelay(1); - } - - /* Enable write to NFC memory */ - nfc_write(mtd, NFC_CONFIG, NFC_BLS_UNLOCKED); - - /* Enable write to all NAND pages */ - nfc_write(mtd, NFC_UNLOCKSTART_BLK0, 0x0000); - nfc_write(mtd, NFC_UNLOCKEND_BLK0, 0xFFFF); - nfc_write(mtd, NFC_WRPROT, NFC_WPC_UNLOCK); - - /* - * Setup NFC: - * - Big Endian transfers, - * - Interrupt after full page read/write. - */ - nfc_write(mtd, NFC_CONFIG1, NFC_BIG_ENDIAN | NFC_INT_MASK | - NFC_FULL_PAGE_INT); - - /* Set spare area size */ - nfc_write(mtd, NFC_SPAS, mtd->oobsize >> 1); - - /* Detect NAND chips */ - if (nand_scan(mtd, 1)) { - printk(KERN_ERR DRV_NAME ": NAND Flash not found !\n"); - retval = -ENXIO; - goto error; - } - - /* Set erase block size */ - switch (mtd->erasesize / mtd->writesize) { - case 32: - nfc_set(mtd, NFC_CONFIG1, NFC_PPB_32); - break; - - case 64: - nfc_set(mtd, NFC_CONFIG1, NFC_PPB_64); - break; - - case 128: - nfc_set(mtd, NFC_CONFIG1, NFC_PPB_128); - break; - - case 256: - nfc_set(mtd, NFC_CONFIG1, NFC_PPB_256); - break; - - default: - printk(KERN_ERR DRV_NAME ": Unsupported NAND flash!\n"); - retval = -ENXIO; - goto error; - } - - return 0; -error: - return retval; -} diff --git a/drivers/net/Makefile b/drivers/net/Makefile index 0aaac6bd81..03ed224cea 100644 --- a/drivers/net/Makefile +++ b/drivers/net/Makefile @@ -39,8 +39,6 @@ obj-$(CONFIG_LAN91C96) += lan91c96.o obj-$(CONFIG_LPC32XX_ETH) += lpc32xx_eth.o obj-$(CONFIG_MACB) += macb.o obj-$(CONFIG_MCFFEC) += mcffec.o mcfmii.o -obj-$(CONFIG_MPC5xxx_FEC) += mpc5xxx_fec.o -obj-$(CONFIG_MPC512x_FEC) += mpc512x_fec.o obj-$(CONFIG_MVGBE) += mvgbe.o obj-$(CONFIG_MVNETA) += mvneta.o obj-$(CONFIG_MVPP2) += mvpp2.o diff --git a/drivers/net/mpc512x_fec.c b/drivers/net/mpc512x_fec.c deleted file mode 100644 index a18b959425..0000000000 --- a/drivers/net/mpc512x_fec.c +++ /dev/null @@ -1,769 +0,0 @@ -/* - * (C) Copyright 2003-2010 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * Derived from the MPC8xx FEC driver. - * Adapted for MPC512x by Grzegorz Bernacki gjb@semihalf.com - */ - -#include <common.h> -#include <malloc.h> -#include <net.h> -#include <netdev.h> -#include <miiphy.h> -#include <asm/io.h> -#include "mpc512x_fec.h" - -DECLARE_GLOBAL_DATA_PTR; - -#define DEBUG 0 - -#if !(defined(CONFIG_MII) || defined(CONFIG_CMD_MII)) -#error "CONFIG_MII has to be defined!" -#endif - -int fec512x_miiphy_read(struct mii_dev *bus, int phyAddr, int devad, - int regAddr); -int fec512x_miiphy_write(struct mii_dev *bus, int phyAddr, int devad, - int regAddr, u16 data); -int mpc512x_fec_init_phy(struct eth_device *dev, bd_t * bis); - -static uchar rx_buff[FEC_BUFFER_SIZE]; -static int rx_buff_idx = 0; - -/********************************************************************/ -#if (DEBUG & 0x2) -static void mpc512x_fec_phydump (char *devname) -{ - u16 phyStatus, i; - u8 phyAddr = CONFIG_PHY_ADDR; - u8 reg_mask[] = { - /* regs to print: 0...8, 21,27,31 */ - 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 0, 1, 0, 0, 0, 0, 0, 1, 0, 0, 0, 1, - }; - - for (i = 0; i < 32; i++) { - if (reg_mask[i]) { - miiphy_read (devname, phyAddr, i, &phyStatus); - printf ("Mii reg %d: 0x%04x\n", i, phyStatus); - } - } -} -#endif - -/********************************************************************/ -static int mpc512x_fec_bd_init (mpc512x_fec_priv *fec) -{ - int ix; - - /* - * Receive BDs init - */ - for (ix = 0; ix < FEC_RBD_NUM; ix++) { - fec->bdBase->rbd[ix].dataPointer = - (u32)&fec->bdBase->recv_frames[ix]; - fec->bdBase->rbd[ix].status = FEC_RBD_EMPTY; - fec->bdBase->rbd[ix].dataLength = 0; - } - - /* - * have the last RBD to close the ring - */ - fec->bdBase->rbd[ix - 1].status |= FEC_RBD_WRAP; - fec->rbdIndex = 0; - - /* - * Trasmit BDs init - */ - for (ix = 0; ix < FEC_TBD_NUM; ix++) { - fec->bdBase->tbd[ix].status = 0; - } - - /* - * Have the last TBD to close the ring - */ - fec->bdBase->tbd[ix - 1].status |= FEC_TBD_WRAP; - - /* - * Initialize some indices - */ - fec->tbdIndex = 0; - fec->usedTbdIndex = 0; - fec->cleanTbdNum = FEC_TBD_NUM; - - return 0; -} - -/********************************************************************/ -static void mpc512x_fec_rbd_clean (mpc512x_fec_priv *fec, volatile FEC_RBD * pRbd) -{ - /* - * Reset buffer descriptor as empty - */ - if ((fec->rbdIndex) == (FEC_RBD_NUM - 1)) - pRbd->status = (FEC_RBD_WRAP | FEC_RBD_EMPTY); - else - pRbd->status = FEC_RBD_EMPTY; - - pRbd->dataLength = 0; - - /* - * Increment BD count - */ - fec->rbdIndex = (fec->rbdIndex + 1) % FEC_RBD_NUM; - - /* - * Now, we have an empty RxBD, notify FEC - * Set Descriptor polling active - */ - out_be32(&fec->eth->r_des_active, 0x01000000); -} - -/********************************************************************/ -static void mpc512x_fec_tbd_scrub (mpc512x_fec_priv *fec) -{ - volatile FEC_TBD *pUsedTbd; - -#if (DEBUG & 0x1) - printf ("tbd_scrub: fec->cleanTbdNum = %d, fec->usedTbdIndex = %d\n", - fec->cleanTbdNum, fec->usedTbdIndex); -#endif - - /* - * process all the consumed TBDs - */ - while (fec->cleanTbdNum < FEC_TBD_NUM) { - pUsedTbd = &fec->bdBase->tbd[fec->usedTbdIndex]; - if (pUsedTbd->status & FEC_TBD_READY) { -#if (DEBUG & 0x20) - printf ("Cannot clean TBD %d, in use\n", fec->usedTbdIndex); -#endif - return; - } - - /* - * clean this buffer descriptor - */ - if (fec->usedTbdIndex == (FEC_TBD_NUM - 1)) - pUsedTbd->status = FEC_TBD_WRAP; - else - pUsedTbd->status = 0; - - /* - * update some indeces for a correct handling of the TBD ring - */ - fec->cleanTbdNum++; - fec->usedTbdIndex = (fec->usedTbdIndex + 1) % FEC_TBD_NUM; - } -} - -/********************************************************************/ -static void mpc512x_fec_set_hwaddr (mpc512x_fec_priv *fec, unsigned char *mac) -{ - u8 currByte; /* byte for which to compute the CRC */ - int byte; /* loop - counter */ - int bit; /* loop - counter */ - u32 crc = 0xffffffff; /* initial value */ - - /* - * The algorithm used is the following: - * we loop on each of the six bytes of the provided address, - * and we compute the CRC by left-shifting the previous - * value by one position, so that each bit in the current - * byte of the address may contribute the calculation. If - * the latter and the MSB in the CRC are different, then - * the CRC value so computed is also ex-ored with the - * "polynomium generator". The current byte of the address - * is also shifted right by one bit at each iteration. - * This is because the CRC generatore in hardware is implemented - * as a shift-register with as many ex-ores as the radixes - * in the polynomium. This suggests that we represent the - * polynomiumm itself as a 32-bit constant. - */ - for (byte = 0; byte < 6; byte++) { - currByte = mac[byte]; - for (bit = 0; bit < 8; bit++) { - if ((currByte & 0x01) ^ (crc & 0x01)) { - crc >>= 1; - crc = crc ^ 0xedb88320; - } else { - crc >>= 1; - } - currByte >>= 1; - } - } - - crc = crc >> 26; - - /* - * Set individual hash table register - */ - if (crc >= 32) { - out_be32(&fec->eth->iaddr1, (1 << (crc - 32))); - out_be32(&fec->eth->iaddr2, 0); - } else { - out_be32(&fec->eth->iaddr1, 0); - out_be32(&fec->eth->iaddr2, (1 << crc)); - } - - /* - * Set physical address - */ - out_be32(&fec->eth->paddr1, (mac[0] << 24) + (mac[1] << 16) + - (mac[2] << 8) + mac[3]); - out_be32(&fec->eth->paddr2, (mac[4] << 24) + (mac[5] << 16) + - 0x8808); -} - -/********************************************************************/ -static int mpc512x_fec_init (struct eth_device *dev, bd_t * bis) -{ - mpc512x_fec_priv *fec = (mpc512x_fec_priv *)dev->priv; - -#if (DEBUG & 0x1) - printf ("mpc512x_fec_init... Begin\n"); -#endif - - mpc512x_fec_set_hwaddr (fec, dev->enetaddr); - out_be32(&fec->eth->gaddr1, 0x00000000); - out_be32(&fec->eth->gaddr2, 0x00000000); - - mpc512x_fec_init_phy (dev, bis); - - /* Set interrupt mask register */ - out_be32(&fec->eth->imask, 0x00000000); - - /* Clear FEC-Lite interrupt event register(IEVENT) */ - out_be32(&fec->eth->ievent, 0xffffffff); - - /* Set transmit fifo watermark register(X_WMRK), default = 64 */ - out_be32(&fec->eth->x_wmrk, 0x0); - - /* Set Opcode/Pause Duration Register */ - out_be32(&fec->eth->op_pause, 0x00010020); - - /* Frame length=1522; MII mode */ - out_be32(&fec->eth->r_cntrl, (FEC_MAX_FRAME_LEN << 16) | 0x24); - - /* Half-duplex, heartbeat disabled */ - out_be32(&fec->eth->x_cntrl, 0x00000000); - - /* Enable MIB counters */ - out_be32(&fec->eth->mib_control, 0x0); - - /* Setup recv fifo start and buff size */ - out_be32(&fec->eth->r_fstart, 0x500); - out_be32(&fec->eth->r_buff_size, FEC_BUFFER_SIZE); - - /* Setup BD base addresses */ - out_be32(&fec->eth->r_des_start, (u32)fec->bdBase->rbd); - out_be32(&fec->eth->x_des_start, (u32)fec->bdBase->tbd); - - /* DMA Control */ - out_be32(&fec->eth->dma_control, 0xc0000000); - - /* Enable FEC */ - setbits_be32(&fec->eth->ecntrl, 0x00000006); - - /* Initilize addresses and status words of BDs */ - mpc512x_fec_bd_init (fec); - - /* Descriptor polling active */ - out_be32(&fec->eth->r_des_active, 0x01000000); - -#if (DEBUG & 0x1) - printf("mpc512x_fec_init... Done \n"); -#endif - return 1; -} - -/********************************************************************/ -int mpc512x_fec_init_phy (struct eth_device *dev, bd_t * bis) -{ - mpc512x_fec_priv *fec = (mpc512x_fec_priv *)dev->priv; - const u8 phyAddr = CONFIG_PHY_ADDR; /* Only one PHY */ - int timeout = 1; - u16 phyStatus; - -#if (DEBUG & 0x1) - printf ("mpc512x_fec_init_phy... Begin\n"); -#endif - - /* - * Clear FEC-Lite interrupt event register(IEVENT) - */ - out_be32(&fec->eth->ievent, 0xffffffff); - - /* - * Set interrupt mask register - */ - out_be32(&fec->eth->imask, 0x00000000); - - if (fec->xcv_type != SEVENWIRE) { - /* - * Set MII_SPEED = (1/(mii_speed * 2)) * System Clock - * and do not drop the Preamble. - */ - out_be32(&fec->eth->mii_speed, - (((gd->arch.ips_clk / 1000000) / 5) + 1) << 1); - - /* - * Reset PHY, then delay 300ns - */ - miiphy_write (dev->name, phyAddr, 0x0, 0x8000); - udelay (1000); - - if (fec->xcv_type == MII10) { - /* - * Force 10Base-T, FDX operation - */ -#if (DEBUG & 0x2) - printf ("Forcing 10 Mbps ethernet link... "); -#endif - miiphy_read (dev->name, phyAddr, 0x1, &phyStatus); - - miiphy_write (dev->name, phyAddr, 0x0, 0x0180); - - timeout = 20; - do { /* wait for link status to go down */ - udelay (10000); - if ((timeout--) == 0) { -#if (DEBUG & 0x2) - printf ("hmmm, should not have waited..."); -#endif - break; - } - miiphy_read (dev->name, phyAddr, 0x1, &phyStatus); -#if (DEBUG & 0x2) - printf ("="); -#endif - } while ((phyStatus & 0x0004)); /* !link up */ - - timeout = 1000; - do { /* wait for link status to come back up */ - udelay (10000); - if ((timeout--) == 0) { - printf ("failed. Link is down.\n"); - break; - } - miiphy_read (dev->name, phyAddr, 0x1, &phyStatus); -#if (DEBUG & 0x2) - printf ("+"); -#endif - } while (!(phyStatus & 0x0004)); /* !link up */ - -#if (DEBUG & 0x2) - printf ("done.\n"); -#endif - } else { /* MII100 */ - /* - * Set the auto-negotiation advertisement register bits - */ - miiphy_write (dev->name, phyAddr, 0x4, 0x01e1); - - /* - * Set MDIO bit 0.12 = 1(&& bit 0.9=1?) to enable auto-negotiation - */ - miiphy_write (dev->name, phyAddr, 0x0, 0x1200); - - /* - * Wait for AN completion - */ - timeout = 2500; - do { - udelay (1000); - - if ((timeout--) == 0) { -#if (DEBUG & 0x2) - printf ("PHY auto neg 0 failed...\n"); -#endif - return -1; - } - - if (miiphy_read (dev->name, phyAddr, 0x1, &phyStatus) != 0) { -#if (DEBUG & 0x2) - printf ("PHY auto neg 1 failed 0x%04x...\n", phyStatus); -#endif - return -1; - } - } while (!(phyStatus & 0x0004)); - -#if (DEBUG & 0x2) - printf ("PHY auto neg complete! \n"); -#endif - } - } - -#if (DEBUG & 0x2) - if (fec->xcv_type != SEVENWIRE) - mpc512x_fec_phydump (dev->name); -#endif - -#if (DEBUG & 0x1) - printf ("mpc512x_fec_init_phy... Done \n"); -#endif - return 1; -} - -/********************************************************************/ -static void mpc512x_fec_halt (struct eth_device *dev) -{ - mpc512x_fec_priv *fec = (mpc512x_fec_priv *)dev->priv; - int counter = 0xffff; - -#if (DEBUG & 0x2) - if (fec->xcv_type != SEVENWIRE) - mpc512x_fec_phydump (dev->name); -#endif - - /* - * mask FEC chip interrupts - */ - out_be32(&fec->eth->imask, 0); - - /* - * issue graceful stop command to the FEC transmitter if necessary - */ - setbits_be32(&fec->eth->x_cntrl, 0x00000001); - - /* - * wait for graceful stop to register - */ - while ((counter--) && (!(in_be32(&fec->eth->ievent) & 0x10000000))) - ; - - /* - * Disable the Ethernet Controller - */ - clrbits_be32(&fec->eth->ecntrl, 0x00000002); - - /* - * Issue a reset command to the FEC chip - */ - setbits_be32(&fec->eth->ecntrl, 0x1); - - /* - * wait at least 16 clock cycles - */ - udelay (10); -#if (DEBUG & 0x3) - printf ("Ethernet task stopped\n"); -#endif -} - -/********************************************************************/ - -static int mpc512x_fec_send(struct eth_device *dev, void *eth_data, - int data_length) -{ - /* - * This routine transmits one frame. This routine only accepts - * 6-byte Ethernet addresses. - */ - mpc512x_fec_priv *fec = (mpc512x_fec_priv *)dev->priv; - volatile FEC_TBD *pTbd; - -#if (DEBUG & 0x20) - printf("tbd status: 0x%04x\n", fec->tbdBase[fec->tbdIndex].status); -#endif - - /* - * Clear Tx BD ring at first - */ - mpc512x_fec_tbd_scrub (fec); - - /* - * Check for valid length of data. - */ - if ((data_length > 1500) || (data_length <= 0)) { - return -1; - } - - /* - * Check the number of vacant TxBDs. - */ - if (fec->cleanTbdNum < 1) { -#if (DEBUG & 0x20) - printf ("No available TxBDs ...\n"); -#endif - return -1; - } - - /* - * Get the first TxBD to send the mac header - */ - pTbd = &fec->bdBase->tbd[fec->tbdIndex]; - pTbd->dataLength = data_length; - pTbd->dataPointer = (u32)eth_data; - pTbd->status |= FEC_TBD_LAST | FEC_TBD_TC | FEC_TBD_READY; - fec->tbdIndex = (fec->tbdIndex + 1) % FEC_TBD_NUM; - - /* Activate transmit Buffer Descriptor polling */ - out_be32(&fec->eth->x_des_active, 0x01000000); - -#if (DEBUG & 0x8) - printf ( "+" ); -#endif - - fec->cleanTbdNum -= 1; - - /* - * wait until frame is sent . - */ - while (pTbd->status & FEC_TBD_READY) { - udelay (10); -#if (DEBUG & 0x8) - printf ("TDB status = %04x\n", pTbd->status); -#endif - } - - return 0; -} - - -/********************************************************************/ -static int mpc512x_fec_recv (struct eth_device *dev) -{ - /* - * This command pulls one frame from the card - */ - mpc512x_fec_priv *fec = (mpc512x_fec_priv *)dev->priv; - volatile FEC_RBD *pRbd = &fec->bdBase->rbd[fec->rbdIndex]; - unsigned long ievent; - int frame_length = 0; - -#if (DEBUG & 0x1) - printf ("mpc512x_fec_recv %d Start...\n", fec->rbdIndex); -#endif -#if (DEBUG & 0x8) - printf( "-" ); -#endif - - /* - * Check if any critical events have happened - */ - ievent = in_be32(&fec->eth->ievent); - out_be32(&fec->eth->ievent, ievent); - if (ievent & 0x20060000) { - /* BABT, Rx/Tx FIFO errors */ - mpc512x_fec_halt (dev); - mpc512x_fec_init (dev, NULL); - return 0; - } - if (ievent & 0x80000000) { - /* Heartbeat error */ - setbits_be32(&fec->eth->x_cntrl, 0x00000001); - } - if (ievent & 0x10000000) { - /* Graceful stop complete */ - if (in_be32(&fec->eth->x_cntrl) & 0x00000001) { - mpc512x_fec_halt (dev); - clrbits_be32(&fec->eth->x_cntrl, 0x00000001); - mpc512x_fec_init (dev, NULL); - } - } - - if (!(pRbd->status & FEC_RBD_EMPTY)) { - if (!(pRbd->status & FEC_RBD_ERR) && - ((pRbd->dataLength - 4) > 14)) { - - /* - * Get buffer size - */ - if (pRbd->status & FEC_RBD_LAST) - frame_length = pRbd->dataLength - 4; - else - frame_length = pRbd->dataLength; -#if (DEBUG & 0x20) - { - int i; - printf ("recv data length 0x%08x data hdr: ", - pRbd->dataLength); - for (i = 0; i < 14; i++) - printf ("%x ", *((u8*)pRbd->dataPointer + i)); - printf("\n"); - } -#endif - /* - * Fill the buffer and pass it to upper layers - */ - memcpy (&rx_buff[rx_buff_idx], (void*)pRbd->dataPointer, - frame_length - rx_buff_idx); - rx_buff_idx = frame_length; - - if (pRbd->status & FEC_RBD_LAST) { - net_process_received_packet((uchar *)rx_buff, - frame_length); - rx_buff_idx = 0; - } - } - - /* - * Reset buffer descriptor as empty - */ - mpc512x_fec_rbd_clean (fec, pRbd); - } - - /* Try to fill Buffer Descriptors */ - out_be32(&fec->eth->r_des_active, 0x01000000); - - return frame_length; -} - -/********************************************************************/ -int mpc512x_fec_initialize (bd_t * bis) -{ - volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; - mpc512x_fec_priv *fec; - struct eth_device *dev; - void * bd; - - fec = (mpc512x_fec_priv *) malloc (sizeof(*fec)); - dev = (struct eth_device *) malloc (sizeof(*dev)); - memset (dev, 0, sizeof *dev); - - fec->eth = &im->fec; - -# ifndef CONFIG_FEC_10MBIT - fec->xcv_type = MII100; -# else - fec->xcv_type = MII10; -# endif - dev->priv = (void *)fec; - dev->iobase = (int)&im->fec; - dev->init = mpc512x_fec_init; - dev->halt = mpc512x_fec_halt; - dev->send = mpc512x_fec_send; - dev->recv = mpc512x_fec_recv; - - strcpy(dev->name, "FEC"); - eth_register (dev); - -#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) - int retval; - struct mii_dev *mdiodev = mdio_alloc(); - if (!mdiodev) - return -ENOMEM; - strncpy(mdiodev->name, dev->name, MDIO_NAME_LEN); - mdiodev->read = fec512x_miiphy_read; - mdiodev->write = fec512x_miiphy_write; - - retval = mdio_register(mdiodev); - if (retval < 0) - return retval; -#endif - - /* Clean up space FEC's MIB and FIFO RAM ...*/ - memset ((void *)&im->fec.mib, 0x00, sizeof(im->fec.mib)); - memset ((void *)&im->fec.fifo, 0x00, sizeof(im->fec.fifo)); - - /* - * Malloc space for BDs (must be quad word-aligned) - * this pointer is lost, so cannot be freed - */ - bd = malloc (sizeof(mpc512x_buff_descs) + 0x1f); - fec->bdBase = (mpc512x_buff_descs*)((u32)bd & 0xfffffff0); - memset ((void *) bd, 0x00, sizeof(mpc512x_buff_descs) + 0x1f); - - /* - * Set interrupt mask register - */ - out_be32(&fec->eth->imask, 0x00000000); - - /* - * Clear FEC-Lite interrupt event register(IEVENT) - */ - out_be32(&fec->eth->ievent, 0xffffffff); - - return 1; -} - -/* MII-interface related functions */ -/********************************************************************/ -int fec512x_miiphy_read(struct mii_dev *bus, int phyAddr, int devad, - int regAddr) -{ - u16 retVal = 0; - volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; - volatile fec512x_t *eth = &im->fec; - u32 reg; /* convenient holder for the PHY register */ - u32 phy; /* convenient holder for the PHY */ - int timeout = 0xffff; - - /* - * reading from any PHY's register is done by properly - * programming the FEC's MII data register. - */ - reg = regAddr << FEC_MII_DATA_RA_SHIFT; - phy = phyAddr << FEC_MII_DATA_PA_SHIFT; - - out_be32(ð->mii_data, FEC_MII_DATA_ST | - FEC_MII_DATA_OP_RD | - FEC_MII_DATA_TA | - phy | reg); - - /* - * wait for the related interrupt - */ - while ((timeout--) && (!(in_be32(ð->ievent) & 0x00800000))) - ; - - if (timeout == 0) { -#if (DEBUG & 0x2) - printf ("Read MDIO failed...\n"); -#endif - return -1; - } - - /* - * clear mii interrupt bit - */ - out_be32(ð->ievent, 0x00800000); - - /* - * it's now safe to read the PHY's register - */ - retVal = (u16) in_be32(ð->mii_data); - - return retVal; -} - -/********************************************************************/ -int fec512x_miiphy_write(struct mii_dev *bus, int phyAddr, int devad, - int regAddr, u16 data) -{ - volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR; - volatile fec512x_t *eth = &im->fec; - u32 reg; /* convenient holder for the PHY register */ - u32 phy; /* convenient holder for the PHY */ - int timeout = 0xffff; - - reg = regAddr << FEC_MII_DATA_RA_SHIFT; - phy = phyAddr << FEC_MII_DATA_PA_SHIFT; - - out_be32(ð->mii_data, FEC_MII_DATA_ST | - FEC_MII_DATA_OP_WR | - FEC_MII_DATA_TA | - phy | reg | data); - - /* - * wait for the MII interrupt - */ - while ((timeout--) && (!(in_be32(ð->ievent) & 0x00800000))) - ; - - if (timeout == 0) { -#if (DEBUG & 0x2) - printf ("Write MDIO failed...\n"); -#endif - return -1; - } - - /* - * clear MII interrupt bit - */ - out_be32(ð->ievent, 0x00800000); - - return 0; -} diff --git a/drivers/net/mpc512x_fec.h b/drivers/net/mpc512x_fec.h deleted file mode 100644 index a083cca2f8..0000000000 --- a/drivers/net/mpc512x_fec.h +++ /dev/null @@ -1,98 +0,0 @@ -/* - * (C) Copyright 2003 - 2009 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * Derived from the MPC8xx driver's header file. - */ - -#ifndef __MPC512X_FEC_H -#define __MPC512X_FEC_H - -#include <common.h> - -/* Receive & Transmit Buffer Descriptor definitions */ -typedef struct BufferDescriptor { - u16 status; - u16 dataLength; - u32 dataPointer; -} FEC_RBD; - -typedef struct { - u16 status; - u16 dataLength; - u32 dataPointer; -} FEC_TBD; - -/* private structure */ -typedef enum { - SEVENWIRE, /* 7-wire */ - MII10, /* MII 10Mbps */ - MII100 /* MII 100Mbps */ -} xceiver_type; - -/* BD Numer definitions */ -#define FEC_TBD_NUM 48 /* The user can adjust this value */ -#define FEC_RBD_NUM 32 /* The user can adjust this value */ - -/* packet size limit */ -#define FEC_MAX_FRAME_LEN 1522 /* recommended default value */ - -/* Buffer size must be evenly divisible by 16 */ -#define FEC_BUFFER_SIZE ((FEC_MAX_FRAME_LEN + 0x10) & (~0xf)) - -typedef struct { - u8 frame[FEC_BUFFER_SIZE]; -} mpc512x_frame; - -typedef struct { - FEC_RBD rbd[FEC_RBD_NUM]; /* RBD ring */ - FEC_TBD tbd[FEC_TBD_NUM]; /* TBD ring */ - mpc512x_frame recv_frames[FEC_RBD_NUM]; /* receive buff */ -} mpc512x_buff_descs; - -typedef struct { - volatile fec512x_t *eth; - xceiver_type xcv_type; /* transceiver type */ - mpc512x_buff_descs *bdBase; /* BD rings and recv buffer */ - u16 rbdIndex; /* next receive BD to read */ - u16 tbdIndex; /* next transmit BD to send */ - u16 usedTbdIndex; /* next transmit BD to clean */ - u16 cleanTbdNum; /* the number of available transmit BDs */ -} mpc512x_fec_priv; - -/* RBD bits definitions */ -#define FEC_RBD_EMPTY 0x8000 /* Buffer is empty */ -#define FEC_RBD_WRAP 0x2000 /* Last BD in ring */ -#define FEC_RBD_LAST 0x0800 /* Buffer is last in frame(useless) */ -#define FEC_RBD_MISS 0x0100 /* Miss bit for prom mode */ -#define FEC_RBD_BC 0x0080 /* The received frame is broadcast frame */ -#define FEC_RBD_MC 0x0040 /* The received frame is multicast frame */ -#define FEC_RBD_LG 0x0020 /* Frame length violation */ -#define FEC_RBD_NO 0x0010 /* Nonoctet align frame */ -#define FEC_RBD_SH 0x0008 /* Short frame */ -#define FEC_RBD_CR 0x0004 /* CRC error */ -#define FEC_RBD_OV 0x0002 /* Receive FIFO overrun */ -#define FEC_RBD_TR 0x0001 /* Frame is truncated */ -#define FEC_RBD_ERR (FEC_RBD_LG | FEC_RBD_NO | FEC_RBD_CR | \ - FEC_RBD_OV | FEC_RBD_TR) - -/* TBD bits definitions */ -#define FEC_TBD_READY 0x8000 /* Buffer is ready */ -#define FEC_TBD_WRAP 0x2000 /* Last BD in ring */ -#define FEC_TBD_LAST 0x0800 /* Buffer is last in frame */ -#define FEC_TBD_TC 0x0400 /* Transmit the CRC */ -#define FEC_TBD_ABC 0x0200 /* Append bad CRC */ - -/* MII-related definitios */ -#define FEC_MII_DATA_ST 0x40000000 /* Start of frame delimiter */ -#define FEC_MII_DATA_OP_RD 0x20000000 /* Perform a read operation */ -#define FEC_MII_DATA_OP_WR 0x10000000 /* Perform a write operation */ -#define FEC_MII_DATA_PA_MSK 0x0f800000 /* PHY Address field mask */ -#define FEC_MII_DATA_RA_MSK 0x007c0000 /* PHY Register field mask */ -#define FEC_MII_DATA_TA 0x00020000 /* Turnaround */ -#define FEC_MII_DATA_DATAMSK 0x0000ffff /* PHY data field */ - -#define FEC_MII_DATA_RA_SHIFT 18 /* MII Register address bits */ -#define FEC_MII_DATA_PA_SHIFT 23 /* MII PHY address bits */ - -#endif /* __MPC512X_FEC_H */ diff --git a/drivers/net/mpc5xxx_fec.c b/drivers/net/mpc5xxx_fec.c deleted file mode 100644 index d75e858a38..0000000000 --- a/drivers/net/mpc5xxx_fec.c +++ /dev/null @@ -1,1031 +0,0 @@ -/* - * (C) Copyright 2003-2010 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * This file is based on mpc4200fec.c, - * (C) Copyright Motorola, Inc., 2000 - */ - -#include <common.h> -#include <mpc5xxx.h> -#include <mpc5xxx_sdma.h> -#include <malloc.h> -#include <net.h> -#include <netdev.h> -#include <miiphy.h> -#include "mpc5xxx_fec.h" - -DECLARE_GLOBAL_DATA_PTR; - -/* #define DEBUG 0x28 */ - -#if !(defined(CONFIG_MII) || defined(CONFIG_CMD_MII)) -#error "CONFIG_MII has to be defined!" -#endif - -#if (DEBUG & 0x60) -static void tfifo_print(char *devname, mpc5xxx_fec_priv *fec); -static void rfifo_print(char *devname, mpc5xxx_fec_priv *fec); -#endif /* DEBUG */ - -typedef struct { - uint8 data[1500]; /* actual data */ - int length; /* actual length */ - int used; /* buffer in use or not */ - uint8 head[16]; /* MAC header(6 + 6 + 2) + 2(aligned) */ -} NBUF; - -int fec5xxx_miiphy_read(struct mii_dev *bus, int phyAddr, int devad, - int regAddr); -int fec5xxx_miiphy_write(struct mii_dev *bus, int phyAddr, int devad, - int regAddr, u16 data); - -static int mpc5xxx_fec_init_phy(struct eth_device *dev, bd_t * bis); - -/********************************************************************/ -#if (DEBUG & 0x2) -static void mpc5xxx_fec_phydump (char *devname) -{ - uint16 phyStatus, i; - uint8 phyAddr = CONFIG_PHY_ADDR; - uint8 reg_mask[] = { -#if CONFIG_PHY_TYPE == 0x79c874 /* AMD Am79C874 */ - /* regs to print: 0...7, 16...19, 21, 23, 24 */ - 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, - 1, 1, 1, 1, 0, 1, 0, 1, 1, 0, 0, 0, 0, 0, 0, 0, -#else - /* regs to print: 0...8, 16...20 */ - 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, - 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, -#endif - }; - - for (i = 0; i < 32; i++) { - if (reg_mask[i]) { - miiphy_read(devname, phyAddr, i, &phyStatus); - printf("Mii reg %d: 0x%04x\n", i, phyStatus); - } - } -} -#endif - -/********************************************************************/ -static int mpc5xxx_fec_rbd_init(mpc5xxx_fec_priv *fec) -{ - int ix; - char *data; - static int once = 0; - - for (ix = 0; ix < FEC_RBD_NUM; ix++) { - if (!once) { - data = (char *)malloc(FEC_MAX_PKT_SIZE); - if (data == NULL) { - printf ("RBD INIT FAILED\n"); - return -1; - } - fec->rbdBase[ix].dataPointer = (uint32)data; - } - fec->rbdBase[ix].status = FEC_RBD_EMPTY; - fec->rbdBase[ix].dataLength = 0; - } - once ++; - - /* - * have the last RBD to close the ring - */ - fec->rbdBase[ix - 1].status |= FEC_RBD_WRAP; - fec->rbdIndex = 0; - - return 0; -} - -/********************************************************************/ -static void mpc5xxx_fec_tbd_init(mpc5xxx_fec_priv *fec) -{ - int ix; - - for (ix = 0; ix < FEC_TBD_NUM; ix++) { - fec->tbdBase[ix].status = 0; - } - - /* - * Have the last TBD to close the ring - */ - fec->tbdBase[ix - 1].status |= FEC_TBD_WRAP; - - /* - * Initialize some indices - */ - fec->tbdIndex = 0; - fec->usedTbdIndex = 0; - fec->cleanTbdNum = FEC_TBD_NUM; -} - -/********************************************************************/ -static void mpc5xxx_fec_rbd_clean(mpc5xxx_fec_priv *fec, volatile FEC_RBD * pRbd) -{ - /* - * Reset buffer descriptor as empty - */ - if ((fec->rbdIndex) == (FEC_RBD_NUM - 1)) - pRbd->status = (FEC_RBD_WRAP | FEC_RBD_EMPTY); - else - pRbd->status = FEC_RBD_EMPTY; - - pRbd->dataLength = 0; - - /* - * Now, we have an empty RxBD, restart the SmartDMA receive task - */ - SDMA_TASK_ENABLE(FEC_RECV_TASK_NO); - - /* - * Increment BD count - */ - fec->rbdIndex = (fec->rbdIndex + 1) % FEC_RBD_NUM; -} - -/********************************************************************/ -static void mpc5xxx_fec_tbd_scrub(mpc5xxx_fec_priv *fec) -{ - volatile FEC_TBD *pUsedTbd; - -#if (DEBUG & 0x1) - printf ("tbd_scrub: fec->cleanTbdNum = %d, fec->usedTbdIndex = %d\n", - fec->cleanTbdNum, fec->usedTbdIndex); -#endif - - /* - * process all the consumed TBDs - */ - while (fec->cleanTbdNum < FEC_TBD_NUM) { - pUsedTbd = &fec->tbdBase[fec->usedTbdIndex]; - if (pUsedTbd->status & FEC_TBD_READY) { -#if (DEBUG & 0x20) - printf("Cannot clean TBD %d, in use\n", fec->cleanTbdNum); -#endif - return; - } - - /* - * clean this buffer descriptor - */ - if (fec->usedTbdIndex == (FEC_TBD_NUM - 1)) - pUsedTbd->status = FEC_TBD_WRAP; - else - pUsedTbd->status = 0; - - /* - * update some indeces for a correct handling of the TBD ring - */ - fec->cleanTbdNum++; - fec->usedTbdIndex = (fec->usedTbdIndex + 1) % FEC_TBD_NUM; - } -} - -/********************************************************************/ -static void mpc5xxx_fec_set_hwaddr(mpc5xxx_fec_priv *fec, char *mac) -{ - uint8 currByte; /* byte for which to compute the CRC */ - int byte; /* loop - counter */ - int bit; /* loop - counter */ - uint32 crc = 0xffffffff; /* initial value */ - - /* - * The algorithm used is the following: - * we loop on each of the six bytes of the provided address, - * and we compute the CRC by left-shifting the previous - * value by one position, so that each bit in the current - * byte of the address may contribute the calculation. If - * the latter and the MSB in the CRC are different, then - * the CRC value so computed is also ex-ored with the - * "polynomium generator". The current byte of the address - * is also shifted right by one bit at each iteration. - * This is because the CRC generatore in hardware is implemented - * as a shift-register with as many ex-ores as the radixes - * in the polynomium. This suggests that we represent the - * polynomiumm itself as a 32-bit constant. - */ - for (byte = 0; byte < 6; byte++) { - currByte = mac[byte]; - for (bit = 0; bit < 8; bit++) { - if ((currByte & 0x01) ^ (crc & 0x01)) { - crc >>= 1; - crc = crc ^ 0xedb88320; - } else { - crc >>= 1; - } - currByte >>= 1; - } - } - - crc = crc >> 26; - - /* - * Set individual hash table register - */ - if (crc >= 32) { - fec->eth->iaddr1 = (1 << (crc - 32)); - fec->eth->iaddr2 = 0; - } else { - fec->eth->iaddr1 = 0; - fec->eth->iaddr2 = (1 << crc); - } - - /* - * Set physical address - */ - fec->eth->paddr1 = (mac[0] << 24) + (mac[1] << 16) + (mac[2] << 8) + mac[3]; - fec->eth->paddr2 = (mac[4] << 24) + (mac[5] << 16) + 0x8808; -} - -/********************************************************************/ -static int mpc5xxx_fec_init(struct eth_device *dev, bd_t * bis) -{ - mpc5xxx_fec_priv *fec = (mpc5xxx_fec_priv *)dev->priv; - struct mpc5xxx_sdma *sdma = (struct mpc5xxx_sdma *)MPC5XXX_SDMA; - -#if (DEBUG & 0x1) - printf ("mpc5xxx_fec_init... Begin\n"); -#endif - - mpc5xxx_fec_init_phy(dev, bis); - - /* - * Call board-specific PHY fixups (if any) - */ -#ifdef CONFIG_RESET_PHY_R - reset_phy(); -#endif - - /* - * Initialize RxBD/TxBD rings - */ - mpc5xxx_fec_rbd_init(fec); - mpc5xxx_fec_tbd_init(fec); - - /* - * Clear FEC-Lite interrupt event register(IEVENT) - */ - fec->eth->ievent = 0xffffffff; - - /* - * Set interrupt mask register - */ - fec->eth->imask = 0x00000000; - - /* - * Set FEC-Lite receive control register(R_CNTRL): - */ - if (fec->xcv_type == SEVENWIRE) { - /* - * Frame length=1518; 7-wire mode - */ - fec->eth->r_cntrl = 0x05ee0020; /*0x05ee0000;FIXME */ - } else { - /* - * Frame length=1518; MII mode; - */ - fec->eth->r_cntrl = 0x05ee0024; /*0x05ee0004;FIXME */ - } - - fec->eth->x_cntrl = 0x00000000; /* half-duplex, heartbeat disabled */ - - /* - * Set Opcode/Pause Duration Register - */ - fec->eth->op_pause = 0x00010020; /*FIXME 0xffff0020; */ - - /* - * Set Rx FIFO alarm and granularity value - */ - fec->eth->rfifo_cntrl = 0x0c000000 - | (fec->eth->rfifo_cntrl & ~0x0f000000); - fec->eth->rfifo_alarm = 0x0000030c; -#if (DEBUG & 0x22) - if (fec->eth->rfifo_status & 0x00700000 ) { - printf("mpc5xxx_fec_init() RFIFO error\n"); - } -#endif - - /* - * Set Tx FIFO granularity value - */ - fec->eth->tfifo_cntrl = 0x0c000000 - | (fec->eth->tfifo_cntrl & ~0x0f000000); -#if (DEBUG & 0x2) - printf("tfifo_status: 0x%08x\n", fec->eth->tfifo_status); - printf("tfifo_alarm: 0x%08x\n", fec->eth->tfifo_alarm); -#endif - - /* - * Set transmit fifo watermark register(X_WMRK), default = 64 - */ - fec->eth->tfifo_alarm = 0x00000080; - fec->eth->x_wmrk = 0x2; - - /* - * Set individual address filter for unicast address - * and set physical address registers. - */ - mpc5xxx_fec_set_hwaddr(fec, (char *)dev->enetaddr); - - /* - * Set multicast address filter - */ - fec->eth->gaddr1 = 0x00000000; - fec->eth->gaddr2 = 0x00000000; - - /* - * Turn ON cheater FSM: ???? - */ - fec->eth->xmit_fsm = 0x03000000; - - /* - * Turn off COMM bus prefetch in the MPC5200 BestComm. It doesn't - * work w/ the current receive task. - */ - sdma->PtdCntrl |= 0x00000001; - - /* - * Set priority of different initiators - */ - sdma->IPR0 = 7; /* always */ - sdma->IPR3 = 6; /* Eth RX */ - sdma->IPR4 = 5; /* Eth Tx */ - - /* - * Clear SmartDMA task interrupt pending bits - */ - SDMA_CLEAR_IEVENT(FEC_RECV_TASK_NO); - - /* - * Initialize SmartDMA parameters stored in SRAM - */ - *(volatile int *)FEC_TBD_BASE = (int)fec->tbdBase; - *(volatile int *)FEC_RBD_BASE = (int)fec->rbdBase; - *(volatile int *)FEC_TBD_NEXT = (int)fec->tbdBase; - *(volatile int *)FEC_RBD_NEXT = (int)fec->rbdBase; - - /* - * Enable FEC-Lite controller - */ - fec->eth->ecntrl |= 0x00000006; - -#if (DEBUG & 0x2) - if (fec->xcv_type != SEVENWIRE) - mpc5xxx_fec_phydump (dev->name); -#endif - - /* - * Enable SmartDMA receive task - */ - SDMA_TASK_ENABLE(FEC_RECV_TASK_NO); - -#if (DEBUG & 0x1) - printf("mpc5xxx_fec_init... Done \n"); -#endif - - return 1; -} - -/********************************************************************/ -static int mpc5xxx_fec_init_phy(struct eth_device *dev, bd_t * bis) -{ - mpc5xxx_fec_priv *fec = (mpc5xxx_fec_priv *)dev->priv; - const uint8 phyAddr = CONFIG_PHY_ADDR; /* Only one PHY */ - static int initialized = 0; - - if(initialized) - return 0; - initialized = 1; - -#if (DEBUG & 0x1) - printf ("mpc5xxx_fec_init_phy... Begin\n"); -#endif - - /* - * Initialize GPIO pins - */ - if (fec->xcv_type == SEVENWIRE) { - /* 10MBit with 7-wire operation */ - /* 7-wire only */ - *(vu_long *)MPC5XXX_GPS_PORT_CONFIG |= 0x00020000; - } else { - /* 100MBit with MD operation */ - *(vu_long *)MPC5XXX_GPS_PORT_CONFIG |= 0x00050000; - } - - /* - * Clear FEC-Lite interrupt event register(IEVENT) - */ - fec->eth->ievent = 0xffffffff; - - /* - * Set interrupt mask register - */ - fec->eth->imask = 0x00000000; - -/* - * In original Promess-provided code PHY initialization is disabled with the - * following comment: "Phy initialization is DISABLED for now. There was a - * problem with running 100 Mbps on PRO board". Thus we temporarily disable - * PHY initialization for the Motion-PRO board, until a proper fix is found. - */ - - if (fec->xcv_type != SEVENWIRE) { - /* - * Set MII_SPEED = (1/(mii_speed * 2)) * System Clock - * and do not drop the Preamble. - * No MII for 7-wire mode - */ - fec->eth->mii_speed = (((gd->arch.ipb_clk >> 20) / 5) << 1); - } - - if (fec->xcv_type != SEVENWIRE) { - /* - * Initialize PHY(LXT971A): - * - * Generally, on power up, the LXT971A reads its configuration - * pins to check for forced operation, If not cofigured for - * forced operation, it uses auto-negotiation/parallel detection - * to automatically determine line operating conditions. - * If the PHY device on the other side of the link supports - * auto-negotiation, the LXT971A auto-negotiates with it - * using Fast Link Pulse(FLP) Bursts. If the PHY partner does not - * support auto-negotiation, the LXT971A automatically detects - * the presence of either link pulses(10Mbps PHY) or Idle - * symbols(100Mbps) and sets its operating conditions accordingly. - * - * When auto-negotiation is controlled by software, the following - * steps are recommended. - * - * Note: - * The physical address is dependent on hardware configuration. - * - */ - int timeout = 1; - uint16 phyStatus; - - /* - * Reset PHY, then delay 300ns - */ - miiphy_write(dev->name, phyAddr, 0x0, 0x8000); - udelay(1000); - - if (fec->xcv_type == MII10) { - /* - * Force 10Base-T, FDX operation - */ -#if (DEBUG & 0x2) - printf("Forcing 10 Mbps ethernet link... "); -#endif - miiphy_read(dev->name, phyAddr, 0x1, &phyStatus); - /* - miiphy_write(dev->name, fec, phyAddr, 0x0, 0x0100); - */ - miiphy_write(dev->name, phyAddr, 0x0, 0x0180); - - timeout = 20; - do { /* wait for link status to go down */ - udelay(10000); - if ((timeout--) == 0) { -#if (DEBUG & 0x2) - printf("hmmm, should not have waited..."); -#endif - break; - } - miiphy_read(dev->name, phyAddr, 0x1, &phyStatus); -#if (DEBUG & 0x2) - printf("="); -#endif - } while ((phyStatus & 0x0004)); /* !link up */ - - timeout = 1000; - do { /* wait for link status to come back up */ - udelay(10000); - if ((timeout--) == 0) { - printf("failed. Link is down.\n"); - break; - } - miiphy_read(dev->name, phyAddr, 0x1, &phyStatus); -#if (DEBUG & 0x2) - printf("+"); -#endif - } while (!(phyStatus & 0x0004)); /* !link up */ - -#if (DEBUG & 0x2) - printf ("done.\n"); -#endif - } else { /* MII100 */ - /* - * Set the auto-negotiation advertisement register bits - */ - miiphy_write(dev->name, phyAddr, 0x4, 0x01e1); - - /* - * Set MDIO bit 0.12 = 1(&& bit 0.9=1?) to enable auto-negotiation - */ - miiphy_write(dev->name, phyAddr, 0x0, 0x1200); - - /* - * Wait for AN completion - */ - timeout = 5000; - do { - udelay(1000); - - if ((timeout--) == 0) { -#if (DEBUG & 0x2) - printf("PHY auto neg 0 failed...\n"); -#endif - return -1; - } - - if (miiphy_read(dev->name, phyAddr, 0x1, &phyStatus) != 0) { -#if (DEBUG & 0x2) - printf("PHY auto neg 1 failed 0x%04x...\n", phyStatus); -#endif - return -1; - } - } while (!(phyStatus & 0x0004)); - -#if (DEBUG & 0x2) - printf("PHY auto neg complete! \n"); -#endif - } - - } - -#if (DEBUG & 0x2) - if (fec->xcv_type != SEVENWIRE) - mpc5xxx_fec_phydump (dev->name); -#endif - - -#if (DEBUG & 0x1) - printf("mpc5xxx_fec_init_phy... Done \n"); -#endif - - return 1; -} - -/********************************************************************/ -static void mpc5xxx_fec_halt(struct eth_device *dev) -{ - struct mpc5xxx_sdma *sdma = (struct mpc5xxx_sdma *)MPC5XXX_SDMA; - mpc5xxx_fec_priv *fec = (mpc5xxx_fec_priv *)dev->priv; - int counter = 0xffff; - -#if (DEBUG & 0x2) - if (fec->xcv_type != SEVENWIRE) - mpc5xxx_fec_phydump (dev->name); -#endif - - /* - * mask FEC chip interrupts - */ - fec->eth->imask = 0; - - /* - * issue graceful stop command to the FEC transmitter if necessary - */ - fec->eth->x_cntrl |= 0x00000001; - - /* - * wait for graceful stop to register - */ - while ((counter--) && (!(fec->eth->ievent & 0x10000000))) ; - - /* - * Disable SmartDMA tasks - */ - SDMA_TASK_DISABLE (FEC_XMIT_TASK_NO); - SDMA_TASK_DISABLE (FEC_RECV_TASK_NO); - - /* - * Turn on COMM bus prefetch in the MPC5200 BestComm after we're - * done. It doesn't work w/ the current receive task. - */ - sdma->PtdCntrl &= ~0x00000001; - - /* - * Disable the Ethernet Controller - */ - fec->eth->ecntrl &= 0xfffffffd; - - /* - * Clear FIFO status registers - */ - fec->eth->rfifo_status &= 0x00700000; - fec->eth->tfifo_status &= 0x00700000; - - fec->eth->reset_cntrl = 0x01000000; - - /* - * Issue a reset command to the FEC chip - */ - fec->eth->ecntrl |= 0x1; - - /* - * wait at least 16 clock cycles - */ - udelay(10); - - /* don't leave the MII speed set to zero */ - if (fec->xcv_type != SEVENWIRE) { - /* - * Set MII_SPEED = (1/(mii_speed * 2)) * System Clock - * and do not drop the Preamble. - * No MII for 7-wire mode - */ - fec->eth->mii_speed = (((gd->arch.ipb_clk >> 20) / 5) << 1); - } - -#if (DEBUG & 0x3) - printf("Ethernet task stopped\n"); -#endif -} - -#if (DEBUG & 0x60) -/********************************************************************/ - -static void tfifo_print(char *devname, mpc5xxx_fec_priv *fec) -{ - uint16 phyAddr = CONFIG_PHY_ADDR; - uint16 phyStatus; - - if ((fec->eth->tfifo_lrf_ptr != fec->eth->tfifo_lwf_ptr) - || (fec->eth->tfifo_rdptr != fec->eth->tfifo_wrptr)) { - - miiphy_read(devname, phyAddr, 0x1, &phyStatus); - printf("\nphyStatus: 0x%04x\n", phyStatus); - printf("ecntrl: 0x%08x\n", fec->eth->ecntrl); - printf("ievent: 0x%08x\n", fec->eth->ievent); - printf("x_status: 0x%08x\n", fec->eth->x_status); - printf("tfifo: status 0x%08x\n", fec->eth->tfifo_status); - - printf(" control 0x%08x\n", fec->eth->tfifo_cntrl); - printf(" lrfp 0x%08x\n", fec->eth->tfifo_lrf_ptr); - printf(" lwfp 0x%08x\n", fec->eth->tfifo_lwf_ptr); - printf(" alarm 0x%08x\n", fec->eth->tfifo_alarm); - printf(" readptr 0x%08x\n", fec->eth->tfifo_rdptr); - printf(" writptr 0x%08x\n", fec->eth->tfifo_wrptr); - } -} - -static void rfifo_print(char *devname, mpc5xxx_fec_priv *fec) -{ - uint16 phyAddr = CONFIG_PHY_ADDR; - uint16 phyStatus; - - if ((fec->eth->rfifo_lrf_ptr != fec->eth->rfifo_lwf_ptr) - || (fec->eth->rfifo_rdptr != fec->eth->rfifo_wrptr)) { - - miiphy_read(devname, phyAddr, 0x1, &phyStatus); - printf("\nphyStatus: 0x%04x\n", phyStatus); - printf("ecntrl: 0x%08x\n", fec->eth->ecntrl); - printf("ievent: 0x%08x\n", fec->eth->ievent); - printf("x_status: 0x%08x\n", fec->eth->x_status); - printf("rfifo: status 0x%08x\n", fec->eth->rfifo_status); - - printf(" control 0x%08x\n", fec->eth->rfifo_cntrl); - printf(" lrfp 0x%08x\n", fec->eth->rfifo_lrf_ptr); - printf(" lwfp 0x%08x\n", fec->eth->rfifo_lwf_ptr); - printf(" alarm 0x%08x\n", fec->eth->rfifo_alarm); - printf(" readptr 0x%08x\n", fec->eth->rfifo_rdptr); - printf(" writptr 0x%08x\n", fec->eth->rfifo_wrptr); - } -} -#endif /* DEBUG */ - -/********************************************************************/ - -static int mpc5xxx_fec_send(struct eth_device *dev, void *eth_data, - int data_length) -{ - /* - * This routine transmits one frame. This routine only accepts - * 6-byte Ethernet addresses. - */ - mpc5xxx_fec_priv *fec = (mpc5xxx_fec_priv *)dev->priv; - volatile FEC_TBD *pTbd; - -#if (DEBUG & 0x20) - printf("tbd status: 0x%04x\n", fec->tbdBase[0].status); - tfifo_print(dev->name, fec); -#endif - - /* - * Clear Tx BD ring at first - */ - mpc5xxx_fec_tbd_scrub(fec); - - /* - * Check for valid length of data. - */ - if ((data_length > 1500) || (data_length <= 0)) { - return -1; - } - - /* - * Check the number of vacant TxBDs. - */ - if (fec->cleanTbdNum < 1) { -#if (DEBUG & 0x20) - printf("No available TxBDs ...\n"); -#endif - return -1; - } - - /* - * Get the first TxBD to send the mac header - */ - pTbd = &fec->tbdBase[fec->tbdIndex]; - pTbd->dataLength = data_length; - pTbd->dataPointer = (uint32)eth_data; - pTbd->status |= FEC_TBD_LAST | FEC_TBD_TC | FEC_TBD_READY; - fec->tbdIndex = (fec->tbdIndex + 1) % FEC_TBD_NUM; - -#if (DEBUG & 0x100) - printf("SDMA_TASK_ENABLE, fec->tbdIndex = %d \n", fec->tbdIndex); -#endif - - /* - * Kick the MII i/f - */ - if (fec->xcv_type != SEVENWIRE) { - uint16 phyStatus; - miiphy_read(dev->name, 0, 0x1, &phyStatus); - } - - /* - * Enable SmartDMA transmit task - */ - -#if (DEBUG & 0x20) - tfifo_print(dev->name, fec); -#endif - SDMA_TASK_ENABLE (FEC_XMIT_TASK_NO); -#if (DEBUG & 0x20) - tfifo_print(dev->name, fec); -#endif -#if (DEBUG & 0x8) - printf( "+" ); -#endif - - fec->cleanTbdNum -= 1; - -#if (DEBUG & 0x129) && (DEBUG & 0x80000000) - printf ("smartDMA ethernet Tx task enabled\n"); -#endif - /* - * wait until frame is sent . - */ - while (pTbd->status & FEC_TBD_READY) { - udelay(10); -#if (DEBUG & 0x8) - printf ("TDB status = %04x\n", pTbd->status); -#endif - } - - return 0; -} - - -/********************************************************************/ -static int mpc5xxx_fec_recv(struct eth_device *dev) -{ - /* - * This command pulls one frame from the card - */ - mpc5xxx_fec_priv *fec = (mpc5xxx_fec_priv *)dev->priv; - volatile FEC_RBD *pRbd = &fec->rbdBase[fec->rbdIndex]; - unsigned long ievent; - int frame_length, len = 0; - NBUF *frame; - uchar buff[FEC_MAX_PKT_SIZE]; - -#if (DEBUG & 0x1) - printf ("mpc5xxx_fec_recv %d Start...\n", fec->rbdIndex); -#endif -#if (DEBUG & 0x8) - printf( "-" ); -#endif - - /* - * Check if any critical events have happened - */ - ievent = fec->eth->ievent; - fec->eth->ievent = ievent; - if (ievent & 0x20060000) { - /* BABT, Rx/Tx FIFO errors */ - mpc5xxx_fec_halt(dev); - mpc5xxx_fec_init(dev, NULL); - return 0; - } - if (ievent & 0x80000000) { - /* Heartbeat error */ - fec->eth->x_cntrl |= 0x00000001; - } - if (ievent & 0x10000000) { - /* Graceful stop complete */ - if (fec->eth->x_cntrl & 0x00000001) { - mpc5xxx_fec_halt(dev); - fec->eth->x_cntrl &= ~0x00000001; - mpc5xxx_fec_init(dev, NULL); - } - } - - if (!(pRbd->status & FEC_RBD_EMPTY)) { - if ((pRbd->status & FEC_RBD_LAST) && !(pRbd->status & FEC_RBD_ERR) && - ((pRbd->dataLength - 4) > 14)) { - - /* - * Get buffer address and size - */ - frame = (NBUF *)pRbd->dataPointer; - frame_length = pRbd->dataLength - 4; - -#if (DEBUG & 0x20) - { - int i; - printf("recv data hdr:"); - for (i = 0; i < 14; i++) - printf("%x ", *(frame->head + i)); - printf("\n"); - } -#endif - /* - * Fill the buffer and pass it to upper layers - */ - memcpy(buff, frame->head, 14); - memcpy(buff + 14, frame->data, frame_length); - net_process_received_packet(buff, frame_length); - len = frame_length; - } - /* - * Reset buffer descriptor as empty - */ - mpc5xxx_fec_rbd_clean(fec, pRbd); - } - SDMA_CLEAR_IEVENT (FEC_RECV_TASK_NO); - return len; -} - - -/********************************************************************/ -int mpc5xxx_fec_initialize(bd_t * bis) -{ - mpc5xxx_fec_priv *fec; - struct eth_device *dev; - char *tmp, *end; - char env_enetaddr[6]; - int i; - - fec = (mpc5xxx_fec_priv *)malloc(sizeof(*fec)); - dev = (struct eth_device *)malloc(sizeof(*dev)); - memset(dev, 0, sizeof *dev); - - fec->eth = (ethernet_regs *)MPC5XXX_FEC; - fec->tbdBase = (FEC_TBD *)FEC_BD_BASE; - fec->rbdBase = (FEC_RBD *)(FEC_BD_BASE + FEC_TBD_NUM * sizeof(FEC_TBD)); -#if defined(CONFIG_MPC5xxx_FEC_MII100) - fec->xcv_type = MII100; -#elif defined(CONFIG_MPC5xxx_FEC_MII10) - fec->xcv_type = MII10; -#elif defined(CONFIG_MPC5xxx_FEC_SEVENWIRE) - fec->xcv_type = SEVENWIRE; -#else -#error fec->xcv_type not initialized. -#endif - if (fec->xcv_type != SEVENWIRE) { - /* - * Set MII_SPEED = (1/(mii_speed * 2)) * System Clock - * and do not drop the Preamble. - * No MII for 7-wire mode - */ - fec->eth->mii_speed = (((gd->arch.ipb_clk >> 20) / 5) << 1); - } - - dev->priv = (void *)fec; - dev->iobase = MPC5XXX_FEC; - dev->init = mpc5xxx_fec_init; - dev->halt = mpc5xxx_fec_halt; - dev->send = mpc5xxx_fec_send; - dev->recv = mpc5xxx_fec_recv; - - strcpy(dev->name, "FEC"); - eth_register(dev); - -#if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) - int retval; - struct mii_dev *mdiodev = mdio_alloc(); - if (!mdiodev) - return -ENOMEM; - strncpy(mdiodev->name, dev->name, MDIO_NAME_LEN); - mdiodev->read = fec5xxx_miiphy_read; - mdiodev->write = fec5xxx_miiphy_write; - - retval = mdio_register(mdiodev); - if (retval < 0) - return retval; -#endif - - /* - * Try to set the mac address now. The fec mac address is - * a garbage after reset. When not using fec for booting - * the Linux fec driver will try to work with this garbage. - */ - tmp = getenv("ethaddr"); - if (tmp) { - for (i=0; i<6; i++) { - env_enetaddr[i] = tmp ? simple_strtoul(tmp, &end, 16) : 0; - if (tmp) - tmp = (*end) ? end+1 : end; - } - mpc5xxx_fec_set_hwaddr(fec, env_enetaddr); - } - - return 1; -} - -/* MII-interface related functions */ -/********************************************************************/ -int fec5xxx_miiphy_read(struct mii_dev *bus, int phyAddr, int devad, - int regAddr) -{ - uint16 retVal = 0; - ethernet_regs *eth = (ethernet_regs *)MPC5XXX_FEC; - uint32 reg; /* convenient holder for the PHY register */ - uint32 phy; /* convenient holder for the PHY */ - int timeout = 0xffff; - - /* - * reading from any PHY's register is done by properly - * programming the FEC's MII data register. - */ - reg = regAddr << FEC_MII_DATA_RA_SHIFT; - phy = phyAddr << FEC_MII_DATA_PA_SHIFT; - - eth->mii_data = (FEC_MII_DATA_ST | FEC_MII_DATA_OP_RD | FEC_MII_DATA_TA | phy | reg); - - /* - * wait for the related interrupt - */ - while ((timeout--) && (!(eth->ievent & 0x00800000))) ; - - if (timeout == 0) { -#if (DEBUG & 0x2) - printf ("Read MDIO failed...\n"); -#endif - return -1; - } - - /* - * clear mii interrupt bit - */ - eth->ievent = 0x00800000; - - /* - * it's now safe to read the PHY's register - */ - retVal = (uint16) eth->mii_data; - - return retVal; -} - -/********************************************************************/ -int fec5xxx_miiphy_write(struct mii_dev *bus, int phyAddr, int devad, - int regAddr, u16 data) -{ - ethernet_regs *eth = (ethernet_regs *)MPC5XXX_FEC; - uint32 reg; /* convenient holder for the PHY register */ - uint32 phy; /* convenient holder for the PHY */ - int timeout = 0xffff; - - reg = regAddr << FEC_MII_DATA_RA_SHIFT; - phy = phyAddr << FEC_MII_DATA_PA_SHIFT; - - eth->mii_data = (FEC_MII_DATA_ST | FEC_MII_DATA_OP_WR | - FEC_MII_DATA_TA | phy | reg | data); - - /* - * wait for the MII interrupt - */ - while ((timeout--) && (!(eth->ievent & 0x00800000))) ; - - if (timeout == 0) { -#if (DEBUG & 0x2) - printf ("Write MDIO failed...\n"); -#endif - return -1; - } - - /* - * clear MII interrupt bit - */ - eth->ievent = 0x00800000; - - return 0; -} diff --git a/drivers/net/mpc5xxx_fec.h b/drivers/net/mpc5xxx_fec.h deleted file mode 100644 index 16c3e8e918..0000000000 --- a/drivers/net/mpc5xxx_fec.h +++ /dev/null @@ -1,282 +0,0 @@ -/* - * (C) Copyright 2003 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * This file is based on mpc4200fec.h - * (C) Copyright Motorola, Inc., 2000 - * - * odin ethernet header file - */ - -#ifndef __MPC5XXX_FEC_H -#define __MPC5XXX_FEC_H - -typedef unsigned long uint32; -typedef unsigned short uint16; -typedef unsigned char uint8; - -typedef struct ethernet_register_set { - -/* [10:2]addr = 00 */ - -/* Control and status Registers (offset 000-1FF) */ - - volatile uint32 fec_id; /* MBAR_ETH + 0x000 */ - volatile uint32 ievent; /* MBAR_ETH + 0x004 */ - volatile uint32 imask; /* MBAR_ETH + 0x008 */ - - volatile uint32 RES0[1]; /* MBAR_ETH + 0x00C */ - volatile uint32 r_des_active; /* MBAR_ETH + 0x010 */ - volatile uint32 x_des_active; /* MBAR_ETH + 0x014 */ - volatile uint32 r_des_active_cl; /* MBAR_ETH + 0x018 */ - volatile uint32 x_des_active_cl; /* MBAR_ETH + 0x01C */ - volatile uint32 ivent_set; /* MBAR_ETH + 0x020 */ - volatile uint32 ecntrl; /* MBAR_ETH + 0x024 */ - - volatile uint32 RES1[6]; /* MBAR_ETH + 0x028-03C */ - volatile uint32 mii_data; /* MBAR_ETH + 0x040 */ - volatile uint32 mii_speed; /* MBAR_ETH + 0x044 */ - volatile uint32 mii_status; /* MBAR_ETH + 0x048 */ - - volatile uint32 RES2[5]; /* MBAR_ETH + 0x04C-05C */ - volatile uint32 mib_data; /* MBAR_ETH + 0x060 */ - volatile uint32 mib_control; /* MBAR_ETH + 0x064 */ - - volatile uint32 RES3[6]; /* MBAR_ETH + 0x068-7C */ - volatile uint32 r_activate; /* MBAR_ETH + 0x080 */ - volatile uint32 r_cntrl; /* MBAR_ETH + 0x084 */ - volatile uint32 r_hash; /* MBAR_ETH + 0x088 */ - volatile uint32 r_data; /* MBAR_ETH + 0x08C */ - volatile uint32 ar_done; /* MBAR_ETH + 0x090 */ - volatile uint32 r_test; /* MBAR_ETH + 0x094 */ - volatile uint32 r_mib; /* MBAR_ETH + 0x098 */ - volatile uint32 r_da_low; /* MBAR_ETH + 0x09C */ - volatile uint32 r_da_high; /* MBAR_ETH + 0x0A0 */ - - volatile uint32 RES4[7]; /* MBAR_ETH + 0x0A4-0BC */ - volatile uint32 x_activate; /* MBAR_ETH + 0x0C0 */ - volatile uint32 x_cntrl; /* MBAR_ETH + 0x0C4 */ - volatile uint32 backoff; /* MBAR_ETH + 0x0C8 */ - volatile uint32 x_data; /* MBAR_ETH + 0x0CC */ - volatile uint32 x_status; /* MBAR_ETH + 0x0D0 */ - volatile uint32 x_mib; /* MBAR_ETH + 0x0D4 */ - volatile uint32 x_test; /* MBAR_ETH + 0x0D8 */ - volatile uint32 fdxfc_da1; /* MBAR_ETH + 0x0DC */ - volatile uint32 fdxfc_da2; /* MBAR_ETH + 0x0E0 */ - volatile uint32 paddr1; /* MBAR_ETH + 0x0E4 */ - volatile uint32 paddr2; /* MBAR_ETH + 0x0E8 */ - volatile uint32 op_pause; /* MBAR_ETH + 0x0EC */ - - volatile uint32 RES5[4]; /* MBAR_ETH + 0x0F0-0FC */ - volatile uint32 instr_reg; /* MBAR_ETH + 0x100 */ - volatile uint32 context_reg; /* MBAR_ETH + 0x104 */ - volatile uint32 test_cntrl; /* MBAR_ETH + 0x108 */ - volatile uint32 acc_reg; /* MBAR_ETH + 0x10C */ - volatile uint32 ones; /* MBAR_ETH + 0x110 */ - volatile uint32 zeros; /* MBAR_ETH + 0x114 */ - volatile uint32 iaddr1; /* MBAR_ETH + 0x118 */ - volatile uint32 iaddr2; /* MBAR_ETH + 0x11C */ - volatile uint32 gaddr1; /* MBAR_ETH + 0x120 */ - volatile uint32 gaddr2; /* MBAR_ETH + 0x124 */ - volatile uint32 random; /* MBAR_ETH + 0x128 */ - volatile uint32 rand1; /* MBAR_ETH + 0x12C */ - volatile uint32 tmp; /* MBAR_ETH + 0x130 */ - - volatile uint32 RES6[3]; /* MBAR_ETH + 0x134-13C */ - volatile uint32 fifo_id; /* MBAR_ETH + 0x140 */ - volatile uint32 x_wmrk; /* MBAR_ETH + 0x144 */ - volatile uint32 fcntrl; /* MBAR_ETH + 0x148 */ - volatile uint32 r_bound; /* MBAR_ETH + 0x14C */ - volatile uint32 r_fstart; /* MBAR_ETH + 0x150 */ - volatile uint32 r_count; /* MBAR_ETH + 0x154 */ - volatile uint32 r_lag; /* MBAR_ETH + 0x158 */ - volatile uint32 r_read; /* MBAR_ETH + 0x15C */ - volatile uint32 r_write; /* MBAR_ETH + 0x160 */ - volatile uint32 x_count; /* MBAR_ETH + 0x164 */ - volatile uint32 x_lag; /* MBAR_ETH + 0x168 */ - volatile uint32 x_retry; /* MBAR_ETH + 0x16C */ - volatile uint32 x_write; /* MBAR_ETH + 0x170 */ - volatile uint32 x_read; /* MBAR_ETH + 0x174 */ - - volatile uint32 RES7[2]; /* MBAR_ETH + 0x178-17C */ - volatile uint32 fm_cntrl; /* MBAR_ETH + 0x180 */ - volatile uint32 rfifo_data; /* MBAR_ETH + 0x184 */ - volatile uint32 rfifo_status; /* MBAR_ETH + 0x188 */ - volatile uint32 rfifo_cntrl; /* MBAR_ETH + 0x18C */ - volatile uint32 rfifo_lrf_ptr; /* MBAR_ETH + 0x190 */ - volatile uint32 rfifo_lwf_ptr; /* MBAR_ETH + 0x194 */ - volatile uint32 rfifo_alarm; /* MBAR_ETH + 0x198 */ - volatile uint32 rfifo_rdptr; /* MBAR_ETH + 0x19C */ - volatile uint32 rfifo_wrptr; /* MBAR_ETH + 0x1A0 */ - volatile uint32 tfifo_data; /* MBAR_ETH + 0x1A4 */ - volatile uint32 tfifo_status; /* MBAR_ETH + 0x1A8 */ - volatile uint32 tfifo_cntrl; /* MBAR_ETH + 0x1AC */ - volatile uint32 tfifo_lrf_ptr; /* MBAR_ETH + 0x1B0 */ - volatile uint32 tfifo_lwf_ptr; /* MBAR_ETH + 0x1B4 */ - volatile uint32 tfifo_alarm; /* MBAR_ETH + 0x1B8 */ - volatile uint32 tfifo_rdptr; /* MBAR_ETH + 0x1BC */ - volatile uint32 tfifo_wrptr; /* MBAR_ETH + 0x1C0 */ - - volatile uint32 reset_cntrl; /* MBAR_ETH + 0x1C4 */ - volatile uint32 xmit_fsm; /* MBAR_ETH + 0x1C8 */ - - volatile uint32 RES8[3]; /* MBAR_ETH + 0x1CC-1D4 */ - volatile uint32 rdes_data0; /* MBAR_ETH + 0x1D8 */ - volatile uint32 rdes_data1; /* MBAR_ETH + 0x1DC */ - volatile uint32 r_length; /* MBAR_ETH + 0x1E0 */ - volatile uint32 x_length; /* MBAR_ETH + 0x1E4 */ - volatile uint32 x_addr; /* MBAR_ETH + 0x1E8 */ - volatile uint32 cdes_data; /* MBAR_ETH + 0x1EC */ - volatile uint32 status; /* MBAR_ETH + 0x1F0 */ - volatile uint32 dma_control; /* MBAR_ETH + 0x1F4 */ - volatile uint32 des_cmnd; /* MBAR_ETH + 0x1F8 */ - volatile uint32 data; /* MBAR_ETH + 0x1FC */ - -/* MIB COUNTERS (Offset 200-2FF) */ - - volatile uint32 rmon_t_drop; /* MBAR_ETH + 0x200 */ - volatile uint32 rmon_t_packets; /* MBAR_ETH + 0x204 */ - volatile uint32 rmon_t_bc_pkt; /* MBAR_ETH + 0x208 */ - volatile uint32 rmon_t_mc_pkt; /* MBAR_ETH + 0x20C */ - volatile uint32 rmon_t_crc_align; /* MBAR_ETH + 0x210 */ - volatile uint32 rmon_t_undersize; /* MBAR_ETH + 0x214 */ - volatile uint32 rmon_t_oversize; /* MBAR_ETH + 0x218 */ - volatile uint32 rmon_t_frag; /* MBAR_ETH + 0x21C */ - volatile uint32 rmon_t_jab; /* MBAR_ETH + 0x220 */ - volatile uint32 rmon_t_col; /* MBAR_ETH + 0x224 */ - volatile uint32 rmon_t_p64; /* MBAR_ETH + 0x228 */ - volatile uint32 rmon_t_p65to127; /* MBAR_ETH + 0x22C */ - volatile uint32 rmon_t_p128to255; /* MBAR_ETH + 0x230 */ - volatile uint32 rmon_t_p256to511; /* MBAR_ETH + 0x234 */ - volatile uint32 rmon_t_p512to1023; /* MBAR_ETH + 0x238 */ - volatile uint32 rmon_t_p1024to2047; /* MBAR_ETH + 0x23C */ - volatile uint32 rmon_t_p_gte2048; /* MBAR_ETH + 0x240 */ - volatile uint32 rmon_t_octets; /* MBAR_ETH + 0x244 */ - volatile uint32 ieee_t_drop; /* MBAR_ETH + 0x248 */ - volatile uint32 ieee_t_frame_ok; /* MBAR_ETH + 0x24C */ - volatile uint32 ieee_t_1col; /* MBAR_ETH + 0x250 */ - volatile uint32 ieee_t_mcol; /* MBAR_ETH + 0x254 */ - volatile uint32 ieee_t_def; /* MBAR_ETH + 0x258 */ - volatile uint32 ieee_t_lcol; /* MBAR_ETH + 0x25C */ - volatile uint32 ieee_t_excol; /* MBAR_ETH + 0x260 */ - volatile uint32 ieee_t_macerr; /* MBAR_ETH + 0x264 */ - volatile uint32 ieee_t_cserr; /* MBAR_ETH + 0x268 */ - volatile uint32 ieee_t_sqe; /* MBAR_ETH + 0x26C */ - volatile uint32 t_fdxfc; /* MBAR_ETH + 0x270 */ - volatile uint32 ieee_t_octets_ok; /* MBAR_ETH + 0x274 */ - - volatile uint32 RES9[2]; /* MBAR_ETH + 0x278-27C */ - volatile uint32 rmon_r_drop; /* MBAR_ETH + 0x280 */ - volatile uint32 rmon_r_packets; /* MBAR_ETH + 0x284 */ - volatile uint32 rmon_r_bc_pkt; /* MBAR_ETH + 0x288 */ - volatile uint32 rmon_r_mc_pkt; /* MBAR_ETH + 0x28C */ - volatile uint32 rmon_r_crc_align; /* MBAR_ETH + 0x290 */ - volatile uint32 rmon_r_undersize; /* MBAR_ETH + 0x294 */ - volatile uint32 rmon_r_oversize; /* MBAR_ETH + 0x298 */ - volatile uint32 rmon_r_frag; /* MBAR_ETH + 0x29C */ - volatile uint32 rmon_r_jab; /* MBAR_ETH + 0x2A0 */ - - volatile uint32 rmon_r_resvd_0; /* MBAR_ETH + 0x2A4 */ - - volatile uint32 rmon_r_p64; /* MBAR_ETH + 0x2A8 */ - volatile uint32 rmon_r_p65to127; /* MBAR_ETH + 0x2AC */ - volatile uint32 rmon_r_p128to255; /* MBAR_ETH + 0x2B0 */ - volatile uint32 rmon_r_p256to511; /* MBAR_ETH + 0x2B4 */ - volatile uint32 rmon_r_p512to1023; /* MBAR_ETH + 0x2B8 */ - volatile uint32 rmon_r_p1024to2047; /* MBAR_ETH + 0x2BC */ - volatile uint32 rmon_r_p_gte2048; /* MBAR_ETH + 0x2C0 */ - volatile uint32 rmon_r_octets; /* MBAR_ETH + 0x2C4 */ - volatile uint32 ieee_r_drop; /* MBAR_ETH + 0x2C8 */ - volatile uint32 ieee_r_frame_ok; /* MBAR_ETH + 0x2CC */ - volatile uint32 ieee_r_crc; /* MBAR_ETH + 0x2D0 */ - volatile uint32 ieee_r_align; /* MBAR_ETH + 0x2D4 */ - volatile uint32 r_macerr; /* MBAR_ETH + 0x2D8 */ - volatile uint32 r_fdxfc; /* MBAR_ETH + 0x2DC */ - volatile uint32 ieee_r_octets_ok; /* MBAR_ETH + 0x2E0 */ - - volatile uint32 RES10[6]; /* MBAR_ETH + 0x2E4-2FC */ - - volatile uint32 RES11[64]; /* MBAR_ETH + 0x300-3FF */ -} ethernet_regs; - -/* Receive & Transmit Buffer Descriptor definitions */ -typedef struct BufferDescriptor { - uint16 status; - uint16 dataLength; - uint32 dataPointer; -} FEC_RBD; -typedef struct { - uint16 status; - uint16 dataLength; - uint32 dataPointer; -} FEC_TBD; - -/* private structure */ -typedef enum { - SEVENWIRE, /* 7-wire */ - MII10, /* MII 10Mbps */ - MII100 /* MII 100Mbps */ -} xceiver_type; - -typedef struct { - ethernet_regs *eth; - xceiver_type xcv_type; /* transceiver type */ - FEC_RBD *rbdBase; /* RBD ring */ - FEC_TBD *tbdBase; /* TBD ring */ - uint16 rbdIndex; /* next receive BD to read */ - uint16 tbdIndex; /* next transmit BD to send */ - uint16 usedTbdIndex; /* next transmit BD to clean */ - uint16 cleanTbdNum; /* the number of available transmit BDs */ -} mpc5xxx_fec_priv; - -/* Ethernet parameter area */ -#define FEC_TBD_BASE (FEC_PARAM_BASE + 0x00) -#define FEC_TBD_NEXT (FEC_PARAM_BASE + 0x04) -#define FEC_RBD_BASE (FEC_PARAM_BASE + 0x08) -#define FEC_RBD_NEXT (FEC_PARAM_BASE + 0x0c) - -/* BD Numer definitions */ -#define FEC_TBD_NUM 48 /* The user can adjust this value */ -#define FEC_RBD_NUM 32 /* The user can adjust this value */ - -/* packet size limit */ -#define FEC_MAX_PKT_SIZE 1536 - -/* RBD bits definitions */ -#define FEC_RBD_EMPTY 0x8000 /* Buffer is empty */ -#define FEC_RBD_WRAP 0x2000 /* Last BD in ring */ -#define FEC_RBD_INT 0x1000 /* Interrupt */ -#define FEC_RBD_LAST 0x0800 /* Buffer is last in frame(useless) */ -#define FEC_RBD_MISS 0x0100 /* Miss bit for prom mode */ -#define FEC_RBD_BC 0x0080 /* The received frame is broadcast frame */ -#define FEC_RBD_MC 0x0040 /* The received frame is multicast frame */ -#define FEC_RBD_LG 0x0020 /* Frame length violation */ -#define FEC_RBD_NO 0x0010 /* Nonoctet align frame */ -#define FEC_RBD_SH 0x0008 /* Short frame */ -#define FEC_RBD_CR 0x0004 /* CRC error */ -#define FEC_RBD_OV 0x0002 /* Receive FIFO overrun */ -#define FEC_RBD_TR 0x0001 /* Frame is truncated */ -#define FEC_RBD_ERR (FEC_RBD_LG | FEC_RBD_NO | FEC_RBD_CR | \ - FEC_RBD_OV | FEC_RBD_TR) - -/* TBD bits definitions */ -#define FEC_TBD_READY 0x8000 /* Buffer is ready */ -#define FEC_TBD_WRAP 0x2000 /* Last BD in ring */ -#define FEC_TBD_INT 0x1000 /* Interrupt */ -#define FEC_TBD_LAST 0x0800 /* Buffer is last in frame */ -#define FEC_TBD_TC 0x0400 /* Transmit the CRC */ -#define FEC_TBD_ABC 0x0200 /* Append bad CRC */ - -/* MII-related definitios */ -#define FEC_MII_DATA_ST 0x40000000 /* Start of frame delimiter */ -#define FEC_MII_DATA_OP_RD 0x20000000 /* Perform a read operation */ -#define FEC_MII_DATA_OP_WR 0x10000000 /* Perform a write operation */ -#define FEC_MII_DATA_PA_MSK 0x0f800000 /* PHY Address field mask */ -#define FEC_MII_DATA_RA_MSK 0x007c0000 /* PHY Register field mask */ -#define FEC_MII_DATA_TA 0x00020000 /* Turnaround */ -#define FEC_MII_DATA_DATAMSK 0x0000ffff /* PHY data field */ - -#define FEC_MII_DATA_RA_SHIFT 18 /* MII Register address bits */ -#define FEC_MII_DATA_PA_SHIFT 23 /* MII PHY address bits */ - -#endif /* __MPC5XXX_FEC_H */ diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index 438681da7a..420767286f 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -38,7 +38,6 @@ obj-$(CONFIG_RTC_MC146818) += mc146818.o obj-$(CONFIG_RTC_MCP79411) += ds1307.o obj-$(CONFIG_MCFRTC) += mcfrtc.o obj-$(CONFIG_RTC_MK48T59) += mk48t59.o -obj-$(CONFIG_RTC_MPC5200) += mpc5xxx.o obj-$(CONFIG_RTC_MPC8xx) += mpc8xx.o obj-$(CONFIG_RTC_MV) += mvrtc.o obj-$(CONFIG_RTC_MX27) += mx27rtc.o diff --git a/drivers/rtc/mpc5xxx.c b/drivers/rtc/mpc5xxx.c deleted file mode 100644 index 929783e15f..0000000000 --- a/drivers/rtc/mpc5xxx.c +++ /dev/null @@ -1,128 +0,0 @@ -/* - * (C) Copyright 2004 - * Reinhard Meyer, EMK Elektronik GmbH - * r.meyer@emk-elektronik.de - * www.emk-elektronik.de - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/***************************************************************************** - * Date & Time support for internal RTC of MPC52xx - *****************************************************************************/ -/*#define DEBUG*/ - -#include <common.h> -#include <command.h> -#include <rtc.h> - -#if defined(CONFIG_CMD_DATE) - -/***************************************************************************** - * this structure should be defined in mpc5200.h ... - *****************************************************************************/ -typedef struct rtc5200 { - volatile ulong tsr; /* MBAR+0x800: time set register */ - volatile ulong dsr; /* MBAR+0x804: data set register */ - volatile ulong nysr; /* MBAR+0x808: new year and stopwatch register */ - volatile ulong aier; /* MBAR+0x80C: alarm and interrupt enable register */ - volatile ulong ctr; /* MBAR+0x810: current time register */ - volatile ulong cdr; /* MBAR+0x814: current data register */ - volatile ulong asir; /* MBAR+0x818: alarm and stopwatch interrupt register */ - volatile ulong piber; /* MBAR+0x81C: periodic interrupt and bus error register */ - volatile ulong trdr; /* MBAR+0x820: test register/divides register */ -} RTC5200; - -#define RTC_SET 0x02000000 -#define RTC_PAUSE 0x01000000 - -/***************************************************************************** - * get time - *****************************************************************************/ -int rtc_get (struct rtc_time *tmp) -{ - RTC5200 *rtc = (RTC5200 *) (CONFIG_SYS_MBAR+0x800); - ulong time, date, time2; - - /* read twice to avoid getting a funny time when the second is just changing */ - do { - time = rtc->ctr; - date = rtc->cdr; - time2 = rtc->ctr; - } while (time != time2); - - tmp->tm_year = date & 0xfff; - tmp->tm_mon = (date >> 24) & 0xf; - tmp->tm_mday = (date >> 16) & 0x1f; - tmp->tm_wday = (date >> 21) & 7; - /* sunday is 7 in 5200 but 0 in rtc_time */ - if (tmp->tm_wday == 7) - tmp->tm_wday = 0; - tmp->tm_hour = (time >> 16) & 0x1f; - tmp->tm_min = (time >> 8) & 0x3f; - tmp->tm_sec = time & 0x3f; - - debug ( "Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n", - tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday, - tmp->tm_hour, tmp->tm_min, tmp->tm_sec); - - return 0; -} - -/***************************************************************************** - * set time - *****************************************************************************/ -int rtc_set (struct rtc_time *tmp) -{ - RTC5200 *rtc = (RTC5200 *) (CONFIG_SYS_MBAR+0x800); - ulong time, date, year; - - debug ( "Set DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n", - tmp->tm_year, tmp->tm_mon, tmp->tm_mday, tmp->tm_wday, - tmp->tm_hour, tmp->tm_min, tmp->tm_sec); - - time = (tmp->tm_hour << 16) | (tmp->tm_min << 8) | tmp->tm_sec; - date = (tmp->tm_mon << 16) | tmp->tm_mday; - if (tmp->tm_wday == 0) - date |= (7 << 8); - else - date |= (tmp->tm_wday << 8); - year = tmp->tm_year; - - /* mask unwanted bits that might show up when rtc_time is corrupt */ - time &= 0x001f3f3f; - date &= 0x001f071f; - year &= 0x00000fff; - - /* pause and set the RTC */ - rtc->nysr = year; - rtc->dsr = date | RTC_PAUSE; - udelay (1000); - rtc->dsr = date | RTC_PAUSE | RTC_SET; - udelay (1000); - rtc->dsr = date | RTC_PAUSE; - udelay (1000); - rtc->dsr = date; - udelay (1000); - - rtc->tsr = time | RTC_PAUSE; - udelay (1000); - rtc->tsr = time | RTC_PAUSE | RTC_SET; - udelay (1000); - rtc->tsr = time | RTC_PAUSE; - udelay (1000); - rtc->tsr = time; - udelay (1000); - - return 0; -} - -/***************************************************************************** - * reset rtc circuit - *****************************************************************************/ -void rtc_reset (void) -{ - return; /* nothing to do */ -} - -#endif diff --git a/drivers/serial/serial.c b/drivers/serial/serial.c index 8b213d0f22..6c5aa5d077 100644 --- a/drivers/serial/serial.c +++ b/drivers/serial/serial.c @@ -133,7 +133,6 @@ serial_initfunc(marvell_serial_initialize); serial_initfunc(max3100_serial_initialize); serial_initfunc(mcf_serial_initialize); serial_initfunc(ml2_serial_initialize); -serial_initfunc(mpc512x_serial_initialize); serial_initfunc(mpc85xx_serial_initialize); serial_initfunc(mpc8xx_serial_initialize); serial_initfunc(mxc_serial_initialize); @@ -221,7 +220,6 @@ void serial_initialize(void) max3100_serial_initialize(); mcf_serial_initialize(); ml2_serial_initialize(); - mpc512x_serial_initialize(); mpc85xx_serial_initialize(); mpc8xx_serial_initialize(); mxc_serial_initialize(); diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index a73b255176..ab5a99faa8 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -26,11 +26,7 @@ obj-$(CONFIG_USB_OHCI_GENERIC) += ohci-generic.o obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o obj-$(CONFIG_USB_EHCI_ARMADA100) += ehci-armada100.o utmi-armada100.o obj-$(CONFIG_USB_EHCI_ATMEL) += ehci-atmel.o -ifdef CONFIG_MPC512X -obj-$(CONFIG_USB_EHCI_FSL) += ehci-mpc512x.o -else obj-$(CONFIG_USB_EHCI_FSL) += ehci-fsl.o -endif obj-$(CONFIG_USB_EHCI_FARADAY) += ehci-faraday.o obj-$(CONFIG_USB_EHCI_GENERIC) += ehci-generic.o obj-$(CONFIG_USB_EHCI_EXYNOS) += ehci-exynos.o diff --git a/drivers/usb/host/ehci-mpc512x.c b/drivers/usb/host/ehci-mpc512x.c deleted file mode 100644 index bb4f461613..0000000000 --- a/drivers/usb/host/ehci-mpc512x.c +++ /dev/null @@ -1,140 +0,0 @@ -/* - * (C) Copyright 2010, Damien Dusha, d.dusha@gmail.com - * - * (C) Copyright 2009, Value Team S.p.A. - * Francesco Rendine, francesco.rendine@valueteam.com - * - * (C) Copyright 2009 Freescale Semiconductor, Inc. - * - * (C) Copyright 2008, Excito Elektronik i Sk=E5ne AB - * - * Author: Tor Krill tor@excito.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <common.h> -#include <pci.h> -#include <usb.h> -#include <asm/io.h> -#include <usb/ehci-ci.h> - -#include "ehci.h" - -static void fsl_setup_phy(volatile struct ehci_hcor *); -static void fsl_platform_set_host_mode(volatile struct usb_ehci *ehci); -static int reset_usb_controller(volatile struct usb_ehci *ehci); -static void usb_platform_dr_init(volatile struct usb_ehci *ehci); - -/* - * Initialize SOC FSL EHCI Controller - * - * This code is derived from EHCI FSL USB Linux driver for MPC5121 - * - */ -int ehci_hcd_init(int index, enum usb_init_type init, - struct ehci_hccr **hccr, struct ehci_hcor **hcor) -{ - volatile struct usb_ehci *ehci; - - /* Hook the memory mapped registers for EHCI-Controller */ - ehci = (struct usb_ehci *)CONFIG_SYS_FSL_USB1_ADDR; - *hccr = (struct ehci_hccr *)((uint32_t)&(ehci->caplength)); - *hcor = (struct ehci_hcor *)((uint32_t) *hccr + - HC_LENGTH(ehci_readl(&(*hccr)->cr_capbase))); - - /* configure interface for UTMI_WIDE */ - usb_platform_dr_init(ehci); - - /* Init Phy USB0 to UTMI+ */ - fsl_setup_phy(*hcor); - - /* Set to host mode */ - fsl_platform_set_host_mode(ehci); - - /* - * Setting the burst size seems to be required to prevent the - * USB from hanging when communicating with certain USB Mass - * storage devices. This was determined by analysing the - * EHCI registers under Linux vs U-Boot and burstsize was the - * major non-interrupt related difference between the two - * implementations. - * - * Some USB sticks behave better than others. In particular, - * the following USB stick is especially problematic: - * 0930:6545 Toshiba Corp - * - * The burstsize is set here to match the Linux implementation. - */ - out_be32(&ehci->burstsize, FSL_EHCI_TXPBURST(8) | - FSL_EHCI_RXPBURST(8)); - - return 0; -} - -/* - * Destroy the appropriate control structures corresponding - * the the EHCI host controller. - */ -int ehci_hcd_stop(int index) -{ - volatile struct usb_ehci *ehci; - int exit_status = 0; - - /* Reset the USB controller */ - ehci = (struct usb_ehci *)CONFIG_SYS_FSL_USB1_ADDR; - exit_status = reset_usb_controller(ehci); - - return exit_status; -} - -static int reset_usb_controller(volatile struct usb_ehci *ehci) -{ - unsigned int i; - - /* Command a reset of the USB Controller */ - out_be32(&(ehci->usbcmd), CMD_RESET); - - /* Wait for the reset process to finish */ - for (i = 65535 ; i > 0 ; i--) { - /* - * The host will set this bit to zero once the - * reset process is complete - */ - if ((in_be32(&(ehci->usbcmd)) & CMD_RESET) == 0) - return 0; - } - - /* Hub did not reset in time */ - return -1; -} - -static void fsl_setup_phy(volatile struct ehci_hcor *hcor) -{ - uint32_t portsc; - - portsc = ehci_readl(&hcor->or_portsc[0]); - portsc &= ~(PORT_PTS_MSK | PORT_PTS_PTW); - - /* Enable the phy mode to UTMI Wide */ - portsc |= PORT_PTS_PTW; - portsc |= PORT_PTS_UTMI; - - ehci_writel(&hcor->or_portsc[0], portsc); -} - -static void fsl_platform_set_host_mode(volatile struct usb_ehci *ehci) -{ - uint32_t temp; - - temp = in_le32(&ehci->usbmode); - temp |= CM_HOST | ES_BE; - out_le32(&ehci->usbmode, temp); -} - -static void usb_platform_dr_init(volatile struct usb_ehci *ehci) -{ - /* Configure interface for UTMI_WIDE */ - out_be32(&ehci->isiphyctrl, PHYCTRL_PHYE | PHYCTRL_PXE); - out_be32(&ehci->usbgenctrl, GC_PPP | GC_PFP ); -} diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index b5e0304348..272df0784a 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -53,7 +53,6 @@ #if defined(CONFIG_CPU_ARM920T) || \ defined(CONFIG_440EP) || \ defined(CONFIG_PCI_OHCI) || \ - defined(CONFIG_MPC5200) || \ defined(CONFIG_SYS_OHCI_USE_NPS) # define OHCI_USE_NPS /* force NoPowerSwitching mode */ #endif @@ -1088,10 +1087,6 @@ static void check_status(td_t *td_list) *phwHeadP &= m32_swap(0xfffffff2); flush_dcache_ed(td_list->ed); } -#ifdef CONFIG_MPC5200 - td_list->hwNextTD = 0; - flush_dcache_td(td_list); -#endif } }
diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h index db0924c943..2350831932 100644 --- a/drivers/usb/host/ohci.h +++ b/drivers/usb/host/ohci.h @@ -115,9 +115,7 @@ struct td { __u32 hwNextTD; /* Next TD Pointer */ __u32 hwBE; /* Memory Buffer End Pointer */
-/* #ifndef CONFIG_MPC5200 /* this seems wrong */ */ __u16 hwPSW[MAXPSW]; -/* #endif */ __u8 unused; __u8 index; struct ed *ed; @@ -141,13 +139,8 @@ typedef struct td td_t; #define NUM_INTS 32 /* part of the OHCI standard */ struct ohci_hcca { __u32 int_table[NUM_INTS]; /* Interrupt ED table */ -#if defined(CONFIG_MPC5200) - __u16 pad1; /* set to 0 on each frame_no change */ - __u16 frame_no; /* current frame number */ -#else __u16 frame_no; /* current frame number */ __u16 pad1; /* set to 0 on each frame_no change */ -#endif __u32 done_head; /* info returned for an interrupt */ u8 reserved_for_hc[116]; } __attribute__((aligned(256))); diff --git a/examples/standalone/Makefile b/examples/standalone/Makefile index 2d08bae24a..f6dea20071 100644 --- a/examples/standalone/Makefile +++ b/examples/standalone/Makefile @@ -9,7 +9,6 @@ extra-y := hello_world extra-$(CONFIG_SMC91111) += smc91111_eeprom extra-$(CONFIG_SMC911X) += smc911x_eeprom extra-$(CONFIG_SPI_FLASH_ATMEL) += atmel_df_pow2 -extra-$(CONFIG_MPC5xxx) += interrupt extra-$(CONFIG_8xx) += test_burst timer extra-$(CONFIG_PPC) += sched
diff --git a/examples/standalone/interrupt.c b/examples/standalone/interrupt.c deleted file mode 100644 index 6e0086015b..0000000000 --- a/examples/standalone/interrupt.c +++ /dev/null @@ -1,65 +0,0 @@ -/* - * (C) Copyright 2006 - * Detlev Zundel, DENX Software Engineering, dzu@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - * - * This is a very simple standalone application demonstrating - * catching IRQs on the MPC52xx architecture. - * - * The interrupt to be intercepted can be specified as an argument - * to the application. Specifying nothing will intercept IRQ1 on the - * MPC5200 platform. On the CR825 carrier board from MicroSys this - * maps to the ABORT switch :) - * - * Note that the specified vector is only a logical number specified - * by the respective header file. - */ - -#include <common.h> -#include <exports.h> -#include <config.h> - -#if defined(CONFIG_MPC5xxx) -#define DFL_IRQ MPC5XXX_IRQ1 -#else -#define DFL_IRQ 0 -#endif - -static void irq_handler (void *arg); - -int interrupt (int argc, char * const argv[]) -{ - int c, irq = -1; - - app_startup (argv); - - if (argc > 1) - irq = simple_strtoul (argv[1], NULL, 0); - if ((irq < 0) || (irq > NR_IRQS)) - irq = DFL_IRQ; - - printf ("Installing handler for irq vector %d and doing busy wait\n", - irq); - printf ("Press 'q' to quit\n"); - - /* Install interrupt handler */ - install_hdlr (irq, irq_handler, NULL); - while ((c = getc ()) != 'q') { - printf ("Ok, ok, I am still alive!\n"); - } - - free_hdlr (irq); - printf ("\nInterrupt handler has been uninstalled\n"); - - return (0); -} - -/* - * Handler for interrupt - */ -static void irq_handler (void *arg) -{ - /* just for demonstration */ - printf ("+"); -} diff --git a/include/asm-generic/u-boot.h b/include/asm-generic/u-boot.h index 7f587670b3..8df28ed0ed 100644 --- a/include/asm-generic/u-boot.h +++ b/include/asm-generic/u-boot.h @@ -45,7 +45,7 @@ typedef struct bd_info { || defined(CONFIG_E500) || defined(CONFIG_MPC86xx) unsigned long bi_immr_base; /* base of IMMR register */ #endif -#if defined(CONFIG_MPC5xxx) || defined(CONFIG_M68K) +#if defined(CONFIG_M68K) unsigned long bi_mbar_base; /* base of internal registers */ #endif #if defined(CONFIG_MPC83xx) @@ -63,10 +63,7 @@ typedef struct bd_info { unsigned long bi_sccfreq; /* SCC_CLK Freq, in MHz */ unsigned long bi_vco; /* VCO Out from PLL, in MHz */ #endif -#if defined(CONFIG_MPC512X) - unsigned long bi_ipsfreq; /* IPS Bus Freq, in MHz */ -#endif /* CONFIG_MPC512X */ -#if defined(CONFIG_MPC5xxx) || defined(CONFIG_M68K) +#if defined(CONFIG_M68K) unsigned long bi_ipbfreq; /* IPB Bus Freq, in MHz */ unsigned long bi_pcifreq; /* PCI Bus Freq, in MHz */ #endif diff --git a/include/configs/TQM5200.h b/include/configs/TQM5200.h deleted file mode 100644 index e1f04459c4..0000000000 --- a/include/configs/TQM5200.h +++ /dev/null @@ -1,626 +0,0 @@ -/* - * (C) Copyright 2003-2014 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * (C) Copyright 2004-2006 - * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */ -#define CONFIG_TQM5200 1 /* ... on TQM5200 module */ -#undef CONFIG_TQM5200_REV100 /* define for revision 100 modules */ - -/* - * Valid values for CONFIG_SYS_TEXT_BASE are: - * 0xFC000000 boot low (standard configuration with room for - * max 64 MByte Flash ROM) - * 0xFFF00000 boot high (for a backup copy of U-Boot) - * 0x00100000 boot from RAM (for testing only) - */ -#ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xFC000000 -#endif - -/* On a Cameron or on a FO300 board or ... */ -#if !defined(CONFIG_CAM5200) && !defined(CONFIG_CHARON) \ - && !defined(CONFIG_FO300) -#define CONFIG_STK52XX 1 /* ... on a STK52XX board */ -#endif - -#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ - -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ - -/* - * Serial console configuration - */ -#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } -#define CONFIG_BOOTCOUNT_LIMIT 1 - -#ifdef CONFIG_FO300 -#define CONFIG_SYS_DEVICE_NULLDEV 1 /* enable null device */ -#define CONFIG_USB_BIN_FIXUP 1 /* for a buggy USB device */ -#if 0 -#define FO300_SILENT_CONSOLE_WHEN_S1_CLOSED 1 /* silent console on PSC1 when S1 */ - /* switch is closed */ -#endif - -#undef FO300_SILENT_CONSOLE_WHEN_S1_CLOSED /* silent console on PSC1 when S1 */ - /* switch is open */ -#endif /* CONFIG_FO300 */ - -#if defined(CONFIG_CHARON) || defined(CONFIG_STK52XX) -#define CONFIG_PS2KBD /* AT-PS/2 Keyboard */ -#define CONFIG_PS2MULT /* .. on PS/2 Multiplexer */ -#define CONFIG_PS2SERIAL 6 /* .. on PSC6 */ -#define CONFIG_PS2MULT_DELAY (CONFIG_SYS_HZ/2) /* Initial delay */ -#define CONFIG_BOARD_EARLY_INIT_R -#endif /* CONFIG_STK52XX */ - -/* - * PCI Mapping: - * 0x40000000 - 0x4fffffff - PCI Memory - * 0x50000000 - 0x50ffffff - PCI IO Space - */ -#if defined(CONFIG_CHARON) || defined(CONFIG_STK52XX) -/* #define CONFIG_PCI_SCAN_SHOW 1 */ - -#define CONFIG_PCI_MEM_BUS 0x40000000 -#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS -#define CONFIG_PCI_MEM_SIZE 0x10000000 - -#define CONFIG_PCI_IO_BUS 0x50000000 -#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS -#define CONFIG_PCI_IO_SIZE 0x01000000 - -#define CONFIG_EEPRO100 1 -#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ -#define CONFIG_NS8382X 1 -#endif /* CONFIG_STK52XX */ - -/* - * Video console - */ -#ifndef CONFIG_TQM5200S /* No graphics controller on TQM5200S */ -#define CONFIG_VIDEO_SM501 -#define CONFIG_VIDEO_SM501_32BPP -#define CONFIG_VIDEO_LOGO - -#ifndef CONFIG_FO300 -#else -#define CONFIG_VIDEO_BMP_LOGO -#endif - -#define CONFIG_SPLASH_SCREEN -#endif /* #ifndef CONFIG_TQM5200S */ - -/* Partitions */ - -/* USB */ -#if defined(CONFIG_CHARON) || defined(CONFIG_FO300) || \ - defined(CONFIG_STK52XX) -#define CONFIG_USB_OHCI_NEW -#define CONFIG_SYS_OHCI_BE_CONTROLLER - -#undef CONFIG_SYS_USB_OHCI_BOARD_INIT -#define CONFIG_SYS_USB_OHCI_CPU_INIT -#define CONFIG_SYS_USB_OHCI_REGS_BASE MPC5XXX_USB -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "mpc5200" -#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15 - -#endif - -#ifndef CONFIG_CAM5200 -/* POST support */ -#define CONFIG_POST (CONFIG_SYS_POST_MEMORY | \ - CONFIG_SYS_POST_CPU) -#endif - -#ifdef CONFIG_POST -/* preserve space for the post_word at end of on-chip SRAM */ -#define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4 -#endif - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -/* - * Command line configuration. - */ -#define CONFIG_CMD_REGINFO - -#ifdef CONFIG_PCI -#define CONFIG_CMD_PCI -#define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1 -#endif - -#if defined(CONFIG_CHARON) || defined(CONFIG_FO300) || \ - defined(CONFIG_MINIFAP) || defined(CONFIG_STK52XX) -#endif - -#if defined(CONFIG_CHARON) || defined(CONFIG_FO300) || \ - defined(CONFIG_STK52XX) - #define CONFIG_CFG_USB - #define CONFIG_CFG_FAT -#endif - -#define CONFIG_TIMESTAMP /* display image timestamps */ - -#if (CONFIG_SYS_TEXT_BASE != 0xFFF00000) -# define CONFIG_SYS_LOWBOOT 1 /* Boot low */ -#endif - -/* - * Autobooting - */ - -#define CONFIG_PREBOOT "echo;" \ - "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ - "echo" - -#undef CONFIG_BOOTARGS - -#if defined(CONFIG_TQM5200_B) && !defined(CONFIG_SYS_LOWBOOT) -# define ENV_UPDT \ - "update=protect off FFF00000 +${filesize};" \ - "erase FFF00000 +${filesize};" \ - "cp.b 200000 FFF00000 ${filesize};" \ - "protect on FFF00000 +${filesize}\0" -#else /* default lowboot configuration */ -# define ENV_UPDT \ - "update=protect off FC000000 +${filesize};" \ - "erase FC000000 +${filesize};" \ - "cp.b 200000 FC000000 ${filesize};" \ - "protect on FC000000 +${filesize}\0" -#endif - -#if defined(CONFIG_TQM5200) -#define CUSTOM_ENV_SETTINGS \ - "hostname=tqm5200\0" \ - "bootfile=/tftpboot/tqm5200/uImage\0" \ - "fdt_file=/tftpboot/tqm5200/tqm5200.dtb\0" \ - "u-boot=/tftpboot/tqm5200/u-boot.bin\0" -#elif defined(CONFIG_CAM5200) -#define CUSTOM_ENV_SETTINGS \ - "bootfile=cam5200/uImage\0" \ - "u-boot=cam5200/u-boot.bin\0" \ - "setup=tftp 200000 cam5200/setup.img; source 200000\0" -#endif - -#if defined(CONFIG_TQM5200_B) -#define ENV_FLASH_LAYOUT \ - "fdt_addr=FC100000\0" \ - "kernel_addr=FC140000\0" \ - "ramdisk_addr=FC600000\0" -#elif defined(CONFIG_CHARON) -#define ENV_FLASH_LAYOUT \ - "fdt_addr=FDFC0000\0" \ - "kernel_addr=FC0A0000\0" \ - "ramdisk_addr=FC200000\0" -#else /* !CONFIG_TQM5200_B */ -#define ENV_FLASH_LAYOUT \ - "fdt_addr=FC0A0000\0" \ - "kernel_addr=FC0C0000\0" \ - "ramdisk_addr=FC300000\0" -#endif - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "console=ttyPSC0\0" \ - ENV_FLASH_LAYOUT \ - "kernel_addr_r=400000\0" \ - "fdt_addr_r=600000\0" \ - "rootpath=/opt/eldk/ppc_6xx\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "addcons=setenv bootargs ${bootargs} " \ - "console=${console},${baudrate}\0" \ - "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ - "flash_self_old=sete console ttyS0; " \ - "run ramargs addip addcons addmtd; " \ - "bootm ${kernel_addr} ${ramdisk_addr}\0" \ - "flash_self=run ramargs addip addcons;" \ - "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ - "flash_nfs_old=sete console ttyS0; run nfsargs addip addcons;" \ - "bootm ${kernel_addr}\0" \ - "flash_nfs=run nfsargs addip addcons;" \ - "bootm ${kernel_addr} - ${fdt_addr}\0" \ - "net_nfs_old=tftp ${kernel_addr_r} ${bootfile};" \ - "sete console ttyS0; run nfsargs addip addcons;bootm\0" \ - "net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \ - "tftp ${fdt_addr_r} ${fdt_file}; " \ - "run nfsargs addip addcons addmtd; " \ - "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \ - CUSTOM_ENV_SETTINGS \ - "load=tftp 200000 ${u-boot}\0" \ - ENV_UPDT \ - "" - -#define CONFIG_BOOTCOMMAND "run net_nfs" - -/* - * IPB Bus clocking configuration. - */ -#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ - -#if defined(CONFIG_SYS_IPBCLK_EQUALS_XLBCLK) && !defined(CONFIG_CAM5200) -/* - * PCI Bus clocking configuration - * - * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if - * CONFIG_SYS_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock of - * 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz. - */ -#define CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2 /* define for 66MHz speed */ -#endif - -/* - * Flash configuration - */ -#define CONFIG_SYS_FLASH_BASE 0xFC000000 - -#if defined(CONFIG_CAM5200) && defined(CONFIG_CAM5200_NIOSFLASH) -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max num of flash banks - (= chip selects) */ -#define CONFIG_SYS_FLASH_WORD_SIZE unsigned int /* main flash device with */ -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ - -#define CONFIG_SYS_FLASH_ADDR0 0x555 -#define CONFIG_SYS_FLASH_ADDR1 0x2AA -#define CONFIG_SYS_FLASH_2ND_16BIT_DEV 1 /* NIOS flash is a 16bit device */ -#define CONFIG_SYS_MAX_FLASH_SECT 128 -#else -/* use CFI flash driver */ -#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */ -#define CONFIG_FLASH_CFI_DRIVER 1 /* Use the common driver */ -#define CONFIG_FLASH_CFI_MTD /* with MTD support */ -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_BOOTCS_START } -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks - (= chip selects) */ -#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max num of sects on one chip */ -#endif - -#define CONFIG_SYS_FLASH_EMPTY_INFO -#define CONFIG_SYS_FLASH_SIZE 0x04000000 /* 64 MByte */ -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 - -#if defined (CONFIG_CAM5200) -# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x00040000) -#elif defined(CONFIG_TQM5200_B) -# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x00080000) -#else -# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x00060000) -#endif - -/* Dynamic MTD partition support */ -#define CONFIG_CMD_MTDPARTS -#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ -#define MTDIDS_DEFAULT "nor0=fc000000.flash" - -#if defined(CONFIG_STK52XX) -# if defined(CONFIG_TQM5200_B) -# if defined(CONFIG_SYS_LOWBOOT) -# define MTDPARTS_DEFAULT "mtdparts=fc000000.flash:1m(firmware)," \ - "256k(dtb)," \ - "2304k(kernel)," \ - "2560k(small-fs)," \ - "2m(initrd)," \ - "8m(misc)," \ - "16m(big-fs)" -# else /* highboot */ -# define MTDPARTS_DEFAULT "mtdparts=fc000000.flash:2560k(kernel),"\ - "3584k(small-fs)," \ - "2m(initrd)," \ - "8m(misc)," \ - "15m(big-fs)," \ - "1m(firmware)" -# endif /* CONFIG_SYS_LOWBOOT */ -# else /* !CONFIG_TQM5200_B */ -# define MTDPARTS_DEFAULT "mtdparts=fc000000.flash:640k(firmware),"\ - "128k(dtb)," \ - "2304k(kernel)," \ - "2m(initrd)," \ - "4m(small-fs)," \ - "8m(misc)," \ - "15m(big-fs)" -# endif /* CONFIG_TQM5200_B */ -#elif defined (CONFIG_CAM5200) -# define MTDPARTS_DEFAULT "mtdparts=fc000000.flash:768k(firmware),"\ - "1792k(kernel)," \ - "5632k(rootfs)," \ - "24m(home)" -#elif defined (CONFIG_CHARON) -# define MTDPARTS_DEFAULT "mtdparts=fc000000.flash:640k(firmware),"\ - "1408k(kernel)," \ - "2m(initrd)," \ - "4m(small-fs)," \ - "24320k(big-fs)," \ - "256k(dts)" -#elif defined (CONFIG_FO300) -# define MTDPARTS_DEFAULT "mtdparts=fc000000.flash:640k(firmware),"\ - "1408k(kernel)," \ - "2m(initrd)," \ - "4m(small-fs)," \ - "8m(misc)," \ - "16m(big-fs)" -#else -# error "Unknown Carrier Board" -#endif /* CONFIG_STK52XX */ - -/* - * Environment settings - */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SIZE 0x4000 /* 16 k - keep small for fast booting */ -#if defined(CONFIG_TQM5200_B) || defined (CONFIG_CAM5200) -#define CONFIG_ENV_SECT_SIZE 0x40000 -#else -#define CONFIG_ENV_SECT_SIZE 0x20000 -#endif /* CONFIG_TQM5200_B */ -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) - -/* - * Memory map - */ -#define CONFIG_SYS_MBAR 0xF0000000 -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_DEFAULT_MBAR 0x80000000 - -/* Use ON-Chip SRAM until RAM will be available */ -#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM -#ifdef CONFIG_POST -/* preserve space for the post_word at end of on-chip SRAM */ -#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_POST_SIZE -#else -#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE -#endif - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -# define CONFIG_SYS_RAMBOOT 1 -#endif - -#if defined (CONFIG_CAM5200) -# define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#elif defined(CONFIG_TQM5200_B) -# define CONFIG_SYS_MONITOR_LEN (512 << 10) /* Reserve 512 kB for Monitor */ -#else -# define CONFIG_SYS_MONITOR_LEN (384 << 10) /* Reserve 384 kB for Monitor */ -#endif - -#define CONFIG_SYS_MALLOC_LEN (1024 << 10) /* Reserve 1024 kB for malloc() */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/* - * Ethernet configuration - */ -#define CONFIG_MPC5xxx_FEC 1 -#define CONFIG_MPC5xxx_FEC_MII100 -/* - * Define CONFIG_MPC5xxx_FEC_MII10 to force FEC at 10Mb - */ -/* #define CONFIG_MPC5xxx_FEC_MII10 */ -#define CONFIG_PHY_ADDR 0x00 - -/* - * GPIO configuration - * - * use CS1: Bit 0 (mask: 0x80000000): - * 1 -> Pin gpio_wkup_6 as second SDRAM chip select (mem_cs1). - * use ALT CAN position: Bits 2-3 (mask: 0x30000000): - * 00 -> No Alternatives, CAN1/2 on PSC2 according to PSC2 setting. - * SPI on PSC3 according to PSC3 setting. Use for CAM5200. - * 01 -> CAN1 on I2C1, CAN2 on Tmr0/1. - * Use for REV200 STK52XX boards and FO300 boards. Do not use - * with REV100 modules (because, there I2C1 is used as I2C bus). - * use ATA: Bits 6-7 (mask 0x03000000): - * 00 -> No ATA chip selects, csb_4/5 used as normal chip selects. - * Use for CAM5200 board. - * 01 -> ATA cs0/1 on csb_4/5. Use for the remaining boards. - * use PSC6: Bits 9-11 (mask 0x00700000): - * 000 -> use PSC6_0 to PSC6_3 as GPIO, PSC6 could not be used as - * UART, CODEC or IrDA. - * GPIO on PSC6_3 is used in post_hotkeys_pressed() to - * enable extended POST tests. - * Use for MINI-FAP and TQM5200_IB boards. - * 101 -> use PSC6 as UART. Pins PSC6_0 to PSC6_3 are used. - * Extended POST test is not available. - * Use for STK52xx, FO300 and CAM5200 boards. - * WARNING: When the extended POST is enabled, these bits will - * be overridden by this code as GPIOs! - * use PCI_DIS: Bit 16 (mask 0x00008000): - * 1 -> disable PCI controller (on CAM5200 board). - * use USB: Bits 18-19 (mask 0x00003000): - * 10 -> two UARTs (on FO300 and CAM5200). - * use PSC3: Bits 20-23 (mask: 0x00000f00): - * 0000 -> All PSC3 pins are GPIOs. - * 1100 -> UART/SPI (on FO300 board). - * 0100 -> UART (on CAM5200 board). - * use PSC2: Bits 25:27 (mask: 0x00000030): - * 000 -> All PSC2 pins are GPIOs. - * 100 -> UART (on CAM5200 board). - * 001 -> CAN1/2 on PSC2 pins. - * Use for REV100 STK52xx boards - * 01x -> Use AC97 (on FO300 board). - * use PSC1: Bits 29-31 (mask: 0x00000007): - * 100 -> UART (on all boards). - */ -#if !defined(CONFIG_SYS_GPS_PORT_CONFIG) -#if defined (CONFIG_MINIFAP) -# define CONFIG_SYS_GPS_PORT_CONFIG 0x91000004 -#elif defined (CONFIG_STK52XX) -# if defined (CONFIG_STK52XX_REV100) -# define CONFIG_SYS_GPS_PORT_CONFIG 0x81500014 -# else /* STK52xx REV200 and above */ -# if defined (CONFIG_TQM5200_REV100) -# error TQM5200 REV100 not supported on STK52XX REV200 or above -# else/* TQM5200 REV200 and above */ -# define CONFIG_SYS_GPS_PORT_CONFIG 0x91500404 -# endif -# endif -#elif defined (CONFIG_FO300) -# define CONFIG_SYS_GPS_PORT_CONFIG 0x91502c24 -#elif defined (CONFIG_CAM5200) -# define CONFIG_SYS_GPS_PORT_CONFIG 0x8050A444 -#else /* TMQ5200 Inbetriebnahme-Board */ -# define CONFIG_SYS_GPS_PORT_CONFIG 0x81000004 -#endif -#endif - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ - -#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ - -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -/* Enable an alternate, more extensive memory test */ -#define CONFIG_SYS_ALT_MEMTEST - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -/* - * Various low-level settings - */ -#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI -#define CONFIG_SYS_HID0_FINAL HID0_ICE - -#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE -#ifdef CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2 -#define CONFIG_SYS_BOOTCS_CFG 0x0008DF30 /* for pci_clk = 66 MHz */ -#else -#define CONFIG_SYS_BOOTCS_CFG 0x0004DF30 /* for pci_clk = 33 MHz */ -#endif -#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE - -#define CONFIG_LAST_STAGE_INIT - -/* - * SRAM - Do not map below 2 GB in address space, because this area is used - * for SDRAM autosizing. - */ -#define CONFIG_SYS_CS2_START 0xE5000000 -#define CONFIG_SYS_CS2_SIZE 0x100000 /* 1 MByte */ -#define CONFIG_SYS_CS2_CFG 0x0004D930 - -/* - * Grafic controller - Do not map below 2 GB in address space, because this - * area is used for SDRAM autosizing. - */ -#define SM501_FB_BASE 0xE0000000 -#define CONFIG_SYS_CS1_START (SM501_FB_BASE) -#define CONFIG_SYS_CS1_SIZE 0x4000000 /* 64 MByte */ -#define CONFIG_SYS_CS1_CFG 0x8F48FF70 -#define SM501_MMIO_BASE CONFIG_SYS_CS1_START + 0x03E00000 - -#define CONFIG_SYS_CS_BURST 0x00000000 -#define CONFIG_SYS_CS_DEADCYCLE 0x33333311 /* 1 dead cycle for flash and SM501 */ - -#if defined(CONFIG_CAM5200) -#define CONFIG_SYS_CS4_START 0xB0000000 -#define CONFIG_SYS_CS4_SIZE 0x00010000 -#define CONFIG_SYS_CS4_CFG 0x01019C10 - -#define CONFIG_SYS_CS5_START 0xD0000000 -#define CONFIG_SYS_CS5_SIZE 0x01208000 -#define CONFIG_SYS_CS5_CFG 0x1414BF10 -#endif - -#define CONFIG_SYS_RESET_ADDRESS 0xff000000 - -/*----------------------------------------------------------------------- - * USB stuff - *----------------------------------------------------------------------- - */ -#define CONFIG_USB_CLOCK 0x0001BBBB -#define CONFIG_USB_CONFIG 0x00001000 - -/*----------------------------------------------------------------------- - * IDE/ATA stuff Supports IDE harddisk - *----------------------------------------------------------------------- - */ - -#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */ - -#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ -#undef CONFIG_IDE_LED /* LED for ide not supported */ - -#define CONFIG_IDE_RESET /* reset for ide supported */ -#define CONFIG_IDE_PREINIT - -#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ -#define CONFIG_SYS_IDE_MAXDEVICE 2 /* max. 2 drives per IDE bus */ - -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 - -#define CONFIG_SYS_ATA_BASE_ADDR MPC5XXX_ATA - -/* Offset for data I/O */ -#define CONFIG_SYS_ATA_DATA_OFFSET (0x0060) - -/* Offset for normal register accesses */ -#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET) - -/* Offset for alternate registers */ -#define CONFIG_SYS_ATA_ALT_OFFSET (0x005C) - -/* Interval between registers */ -#define CONFIG_SYS_ATA_STRIDE 4 - -/* Support ATAPI devices */ -#define CONFIG_ATAPI 1 - -/*----------------------------------------------------------------------- - * Open firmware flat tree support - *----------------------------------------------------------------------- - */ -#define OF_CPU "PowerPC,5200@0" -#define OF_SOC "soc5200@f0000000" -#define OF_TBCLK (bd->bi_busfreq / 4) -#define OF_STDOUT_PATH "/soc5200@f0000000/serial@2000" - -#endif /* __CONFIG_H */ diff --git a/include/configs/a3m071.h b/include/configs/a3m071.h deleted file mode 100644 index 82b9ff471d..0000000000 --- a/include/configs/a3m071.h +++ /dev/null @@ -1,408 +0,0 @@ -/* - * Copyright 2012-2013 Stefan Roese sr@denx.de - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC5200 -#define CONFIG_A3M071 /* A3M071 board */ - -#define CONFIG_SYS_TEXT_BASE 0x01000000 /* boot low for 32 MiB boards */ - -#define CONFIG_SPL_TARGET "u-boot-img.bin" - -#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33MHz */ - -#define CONFIG_MISC_INIT_R -#define CONFIG_SYS_LOWBOOT /* Enable lowboot */ - -#ifdef CONFIG_A4M2K -#define CONFIG_HOSTNAME a4m2k -#else -#define CONFIG_HOSTNAME a3m071 -#endif - -#define CONFIG_BOOTCOUNT_LIMIT - -/* - * Serial console configuration - */ -#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ -#define CONFIG_SYS_BAUDRATE_TABLE \ - { 9600, 19200, 38400, 57600, 115200, 230400 } - -/* - * Command line configuration. - */ -#define CONFIG_CMD_REGINFO -#define CONFIG_BOOTP_SEND_HOSTNAME -#define CONFIG_BOOTP_SERVERIP -#define CONFIG_BOOTP_MAY_FAIL -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_SERVERIP -#define CONFIG_NET_RETRY_COUNT 3 -#define CONFIG_NETCONSOLE -#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ -#define CONFIG_MTD_PARTITIONS /* needed for UBI */ -#define CONFIG_FLASH_CFI_MTD -#define MTDIDS_DEFAULT "nor0=fc000000.flash" -#define MTDPARTS_DEFAULT "mtdparts=fc000000.flash:512k(u-boot)," \ - "128k(env1)," \ - "128k(env2)," \ - "128k(hwinfo)," \ - "1M(nvramsim)," \ - "128k(dtb)," \ - "5M(kernel)," \ - "128k(sysinfo)," \ - "7552k(root)," \ - "4M(app)," \ - "5376k(data)," \ - "8M(install)" - -#define CONFIG_LZO /* needed for UBI */ -#define CONFIG_RBTREE /* needed for UBI */ -#define CONFIG_CMD_MTDPARTS -#define CONFIG_CMD_UBIFS - -/* - * IPB Bus clocking configuration. - */ -#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ -/* define for 66MHz speed - undef for 33MHz PCI clock speed */ -#ifdef CONFIG_A4M2K -#define CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2 -#else -#undef CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2 -#endif - -/* maximum size of the flat tree (8K) */ -#define OF_FLAT_TREE_MAX_SIZE 8192 - -#define OF_CPU "PowerPC,5200@0" -#define OF_SOC "soc5200@f0000000" -#define OF_TBCLK (bd->bi_busfreq / 4) -#define OF_STDOUT_PATH "/soc5200@f0000000/serial@2000" - -/* - * NOR flash configuration - */ -#define CONFIG_SYS_FLASH_BASE 0xfc000000 -#define CONFIG_SYS_FLASH_SIZE 0x02000000 -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x80000) - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_MAX_FLASH_SECT 256 -#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 -#define CONFIG_SYS_FLASH_LOCK_TOUT 5 -#define CONFIG_SYS_FLASH_UNLOCK_TOUT 10000 -#define CONFIG_SYS_FLASH_PROTECTION -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_SYS_FLASH_EMPTY_INFO -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE -#define CONFIG_FLASH_VERIFY - -/* - * Environment settings - */ -#define CONFIG_ENV_IS_IN_FLASH -#define CONFIG_ENV_SIZE 0x10000 -#define CONFIG_ENV_SECT_SIZE 0x20000 -#define CONFIG_ENV_OVERWRITE -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) - -/* - * Memory map - */ -#define CONFIG_SYS_MBAR 0xf0000000 -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_DEFAULT_MBAR 0x80000000 - -/* Use SRAM until RAM will be available */ -#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM -#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE - -#define CONFIG_SYS_MONITOR_LEN (512 << 10) -#define CONFIG_SYS_MALLOC_LEN (4 << 20) -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) - -/* - * Ethernet configuration - */ -#define CONFIG_MPC5xxx_FEC -#define CONFIG_MPC5xxx_FEC_MII100 -#ifdef CONFIG_A4M2K -#define CONFIG_PHY_ADDR 0x01 -#else -#define CONFIG_PHY_ADDR 0x00 -#endif - -/* - * GPIO configuration - */ - -/* - * GPIO-config depends on failsave-level - * failsave 0 means just MPX-config, no digiboard, no fpga - * 1 means digiboard ok - * 2 means fpga ok - */ - -#ifdef CONFIG_A4M2K -#define CONFIG_SYS_GPS_PORT_CONFIG 0x1005C805 -#else -/* for failsave-level 0 - full failsave */ -#define CONFIG_SYS_GPS_PORT_CONFIG 0x1005C005 -/* for failsave-level 1 - only digiboard ok */ -#define CONFIG_SYS_GPS_PORT_CONFIG_1 0x1005C065 -/* for failsave-level 2 - all ok */ -#define CONFIG_SYS_GPS_PORT_CONFIG_2 0x1005C065 -#endif - -#define CONFIG_WDOG_GPIO_PIN GPIO_WKUP_7 -#if defined(CONFIG_A4M2K) && !defined(CONFIG_SPL_BUILD) -#define CONFIG_HW_WATCHDOG /* Use external HW-Watchdog */ -#endif - -/* - * Configuration matrix - * MSB LSB - * failsave 0 0x1005C005 00010000000001011100000000000101 ( full failsave ) - * failsave 1 0x1005C065 00010000000001011100000001100101 ( digib.-ver ok ) - * failsave 2 0x1005C065 00010000000001011100000001100101 ( all ok ) - * || ||| || | ||| | | | | - * || ||| || | ||| | | | | bit rev name - * ++-+++-++--+---+++-+---+---+---+- 0 31 CS1 - * +-+++-++--+---+++-+---+---+---+- 1 30 LPTZ - * ||| || | ||| | | | | 2 29 ALTs - * +++-++--+---+++-+---+---+---+- 3 28 ALTs - * ++-++--+---+++-+---+---+---+- 4 27 CS7 - * +-++--+---+++-+---+---+---+- 5 26 CS6 - * || | ||| | | | | 6 25 ATA - * ++--+---+++-+---+---+---+- 7 24 ATA - * +--+---+++-+---+---+---+- 8 23 IR_USB_CLK - * | ||| | | | | 9 22 IRDA - * | ||| | | | | 10 21 IRDA - * +---+++-+---+---+---+- 11 20 IRDA - * ||| | | | | 12 19 Ether - * ||| | | | | 13 18 Ether - * ||| | | | | 14 17 Ether - * +++-+---+---+---+- 15 16 Ether - * ++-+---+---+---+- 16 15 PCI_DIS - * +-+---+---+---+- 17 14 USB_SE - * | | | | 18 13 USB - * +---+---+---+- 19 12 USB - * | | | 20 11 PSC3 - * | | | 21 10 PSC3 - * | | | 22 9 PSC3 - * +---+---+- 23 8 PSC3 - * | | 24 7 - - * | | 25 6 PSC2 - * | | 26 5 PSC2 - * +---+- 27 4 PSC2 - * | 28 3 - - * | 29 2 PSC1 - * | 30 1 PSC1 - * +- 31 0 PSC1 - */ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP - -#define CONFIG_CMDLINE_EDITING - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 -#else -#define CONFIG_SYS_CBSIZE 256 -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -#define CONFIG_SYS_MAXARGS 16 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -#define CONFIG_SYS_MEMTEST_START 0x00100000 -#define CONFIG_SYS_MEMTEST_END 0x00f00000 - -#define CONFIG_SYS_LOAD_ADDR 0x00100000 - -/* - * Various low-level settings - */ -#define CONFIG_SYS_HID0_INIT (HID0_ICE | HID0_ICFI) -#define CONFIG_SYS_HID0_FINAL HID0_ICE - -#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE -#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE - -#ifdef CONFIG_A4M2K -/* external MRAM */ -#define CONFIG_SYS_CS1_START 0xf1000000 -#define CONFIG_SYS_CS1_SIZE (512 << 10) /* 512KiB MRAM */ -#endif - -#define CONFIG_SYS_CS2_START 0xe0000000 -#define CONFIG_SYS_CS2_SIZE 0x00100000 - -/* FPGA slave io (512kiB / 1MiB) - see ticket #66 */ -#define CONFIG_SYS_CS3_START 0xE9000000 -#ifdef CONFIG_A4M2K -#define CONFIG_SYS_CS3_SIZE 0x00100000 -#else -#define CONFIG_SYS_CS3_SIZE 0x00080000 -#endif -/* 00000000 00110010 1 0 1 1 10 01 00 00 0 0 0 0 = 0x0032B900 */ -#define CONFIG_SYS_CS3_CFG 0x0032B900 - -#ifndef CONFIG_A4M2K -/* Diagnosis Interface - see ticket #63 */ -#define CONFIG_SYS_CS4_START 0xEA000000 -#define CONFIG_SYS_CS4_SIZE 0x00000001 -/* 00000000 00000010 1 0 1 1 10 01 00 00 0 0 0 0 = 0x0002B900 */ -#define CONFIG_SYS_CS4_CFG 0x0002B900 -#endif - -/* FPGA master io (64kiB / 1MiB) - see ticket #66 */ -#define CONFIG_SYS_CS5_START 0xE8000000 -#ifdef CONFIG_A4M2K -#define CONFIG_SYS_CS5_SIZE 0x00100000 -#else -#define CONFIG_SYS_CS5_SIZE 0x00010000 -#endif -/* 00000000 00110010 1 0 1 1 10 01 00 00 0 0 0 0 = 0x0032B900 */ -#define CONFIG_SYS_CS5_CFG 0x0032B900 - -#ifdef CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2 /* for pci_clk = 66 MHz */ -#define CONFIG_SYS_BOOTCS_CFG 0x0006F900 -#define CONFIG_SYS_CS1_CFG 0x0008FD00 -#define CONFIG_SYS_CS2_CFG 0x0006F90C -#else /* for pci_clk = 33 MHz */ -#define CONFIG_SYS_BOOTCS_CFG 0x0002F900 -#define CONFIG_SYS_CS1_CFG 0x0001FB00 -#define CONFIG_SYS_CS2_CFG 0x0002F90C -#endif - -#define CONFIG_SYS_CS_BURST 0x00000000 -/* set DC for FPGA CS5 and CS3 to 0 - see ticket #66 */ -/* R 7 R 6 R 5 R 4 R 3 R 2 R 1 R 0 */ -/* 00 11 00 11 00 00 00 11 00 00 00 00 00 00 00 00 */ -#define CONFIG_SYS_CS_DEADCYCLE 0x33030000 - -#define CONFIG_SYS_RESET_ADDRESS 0xff000000 - -/* - * Environment Configuration - */ - -#undef CONFIG_BOOTARGS - -#define CONFIG_SYS_AUTOLOAD "n" - -#define CONFIG_PREBOOT "echo;" \ - "echo Type "run flash_mtd" to boot from flash with mtd filesystem;" \ - "echo Type "run net_nfs" to boot from tftp with nfs filesystem;" \ - "echo" - -#undef CONFIG_BOOTARGS - -#define CONFIG_SYS_FDT_BASE 0xfc1e0000 -#define CONFIG_SYS_FDT_SIZE (16<<10) - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "verify=no\0" \ - "loadaddr=200000\0" \ - "kernel_addr=" __stringify(CONFIG_SYS_OS_BASE) "\0" \ - "kernel_addr_r=1000000\0" \ - "fdt_addr=" __stringify(CONFIG_SYS_FDT_BASE) "\0" \ - "fdt_addr_r=1800000\0" \ - "bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0" \ - "fdtfile=" __stringify(CONFIG_HOSTNAME) "/" \ - __stringify(CONFIG_HOSTNAME) ".dtb\0" \ - "rootpath=/opt/eldk-5.2.1/powerpc/" \ - "core-image-minimal-mtdutils-dropbear-generic\0" \ - "consoledev=ttyPSC0\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "mtdargs=setenv bootargs root=/dev/mtdblock8 " \ - "rootfstype=squashfs,jffs2\0" \ - "addhost=setenv bootargs ${bootargs} " \ - "hostname=${hostname}\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "addtty=setenv bootargs ${bootargs} " \ - "console=${consoledev},${baudrate}\0" \ - "flash_nfs=run nfsargs addip addtty addmtd addhost;" \ - "bootm ${kernel_addr} - ${fdt_addr}\0" \ - "flash_mtd=run mtdargs addip addtty addmtd addhost;" \ - "bootm ${kernel_addr} - ${fdt_addr}\0" \ - "flash_self=run ramargs addip addtty addmtd addhost;" \ - "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ - "net_nfs=tftp ${kernel_addr_r} ${bootfile};" \ - "tftp ${fdt_addr_r} ${fdtfile};" \ - "run nfsargs addip addtty addmtd addhost;" \ - "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \ - "load=tftp ${loadaddr} " __stringify(CONFIG_HOSTNAME) \ - "/u-boot-img.bin\0" \ - "update=protect off fc000000 fc07ffff;" \ - "era fc000000 fc07ffff;" \ - "cp.b ${loadaddr} fc000000 ${filesize}\0" \ - "upd=run load;run update\0" \ - "upd_fdt=tftp 1800000 a3m071/a3m071.dtb;" \ - "run mtdargs addip addtty addmtd addhost;" \ - "fdt addr 1800000;fdt boardsetup;fdt chosen;" \ - "erase fc1e0000 fc1fffff;cp.b 1800000 fc1e0000 20000" \ - "upd_kernel=tftp 1000000 a3m071/uImage-uncompressed;" \ - "erase fc200000 fc6fffff;" \ - "cp.b 1000000 fc200000 ${filesize}" \ - "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ - "mtdids=" MTDIDS_DEFAULT "\0" \ - "mtdparts=" MTDPARTS_DEFAULT "\0" \ - "" - -#define CONFIG_BOOTCOMMAND "run flash_mtd" - -/* - * SPL related defines - */ -#define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_TEXT_BASE 0xfc000000 - -/* Place BSS for SPL near end of SDRAM */ -#define CONFIG_SPL_BSS_START_ADDR ((128 - 1) << 20) -#define CONFIG_SPL_BSS_MAX_SIZE (64 << 10) - -/* Place patched DT blob (fdt) at this address */ -#define CONFIG_SYS_SPL_ARGS_ADDR 0x01800000 - -/* Settings for real U-Boot to be loaded from NOR flash */ -#ifndef __ASSEMBLY__ -extern char __spl_flash_end[]; -#endif -#define CONFIG_SYS_UBOOT_BASE __spl_flash_end -#define CONFIG_SYS_SPL_MAX_LEN (32 << 10) -#define CONFIG_SYS_UBOOT_START 0x1000100 - -#endif /* __CONFIG_H */ diff --git a/include/configs/a4m072.h b/include/configs/a4m072.h deleted file mode 100644 index 6a26269807..0000000000 --- a/include/configs/a4m072.h +++ /dev/null @@ -1,324 +0,0 @@ -/* - * (C) Copyright 2003-2005 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * (C) Copyright 2010 - * Sergei Poselenov, Emcraft Systems, sposelenov@emcraft.com. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC5200 1 /* This is a MPC5200 CPU */ -#define CONFIG_A4M072 1 /* ... on A4M072 board */ -#define CONFIG_MPC5200_DDR 1 /* ... use DDR RAM */ - -#define CONFIG_SYS_TEXT_BASE 0xFE000000 - -#define CONFIG_MISC_INIT_R - -#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ - -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ - -/* - * Serial console configuration - */ -#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } -/* define to enable silent console */ -#define CONFIG_SYS_DEVICE_NULLDEV 1 /* include nulldev device */ - -/* - * PCI Mapping: - * 0x40000000 - 0x4fffffff - PCI Memory - * 0x50000000 - 0x50ffffff - PCI IO Space - */ - -#if defined(CONFIG_PCI) -#define CONFIG_PCI_SCAN_SHOW 1 -#define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1 - -#define CONFIG_PCI_MEM_BUS 0x40000000 -#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS -#define CONFIG_PCI_MEM_SIZE 0x10000000 - -#define CONFIG_PCI_IO_BUS 0x50000000 -#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS -#define CONFIG_PCI_IO_SIZE 0x01000000 -#endif - -#define CONFIG_SYS_XLB_PIPELINING 1 - -#undef CONFIG_EEPRO100 - -/* USB */ -#define CONFIG_USB_OHCI_NEW -#define CONFIG_SYS_OHCI_BE_CONTROLLER -#undef CONFIG_SYS_USB_OHCI_BOARD_INIT -#define CONFIG_SYS_USB_OHCI_CPU_INIT 1 -#define CONFIG_SYS_USB_OHCI_REGS_BASE MPC5XXX_USB -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "mpc5200" -#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15 - -#define CONFIG_TIMESTAMP /* Print image info with timestamp */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -/* - * Command line configuration. - */ - -#if defined(CONFIG_PCI) -#define CONFIG_CMD_PCI -#endif - -#if (CONFIG_SYS_TEXT_BASE == 0xFE000000) /* Boot low with 32 MB Flash */ -#define CONFIG_SYS_LOWBOOT 1 -#define CONFIG_SYS_LOWBOOT32 1 -#endif - -/* - * Autobooting - */ - -#define CONFIG_SYS_AUTOLOAD "n" - -#undef CONFIG_BOOTARGS -#define CONFIG_PREBOOT "run try_update" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "bk=run add_mtd ; run add_consolespec ; bootm 200000\0" \ - "cf1=diskboot 200000 0:1\0" \ - "bootcmd_cf1=run bcf1\0" \ - "bcf=setenv bootargs root=/dev/hda3\0" \ - "bootcmd_nfs=run bnfs\0" \ - "norargs=setenv bootargs root=/dev/mtdblock3 rootfstype=cramfs "\ - "panic=1\0" \ - "bootcmd_nor=cp.b ${kernel_addr} 200000 100000;" \ - "run norargs addip; run bk\0" \ - "bnfs=nfs 200000 ${rootpath}/boot/uImage;" \ - "run nfsargs addip ; run bk\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "try_update=usb start;sleep 2;usb start;sleep 1;" \ - "fatload usb 0 2F0000 PCPUUPDT 2FF;usb stop;" \ - "source 2F0000\0" \ - "env_addr=FE060000\0" \ - "kernel_addr=FE100000\0" \ - "rootfs_addr=FE200000\0" \ - "add_mtd=setenv bootargs ${bootargs} mtdparts=" \ - "phys_mapped_flash:384k(u),640k(e),1m(k),30m(r)\0" \ - "bcf1=run cf1; run bcf; run addip; run bk\0" \ - "add_consolespec=setenv bootargs ${bootargs} " \ - "console=/dev/null quiet\0" \ - "addip=if test -n ${ethaddr};" \ - "then if test -n ${ipaddr};" \ - "then setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:"\ - "${netmask}:${hostname}:${netdev}:off;" \ - "fi;" \ - "else;" \ - "setenv bootargs ${bootargs} no_ethaddr;" \ - "fi\0" \ - "hostname=CPUP0\0" \ - "netdev=eth0\0" \ - "bootcmd=run bootcmd_nor\0" \ - "" -/* - * IPB Bus clocking configuration. - */ -#undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ - -/* - * Flash configuration - */ -#define CONFIG_SYS_FLASH_BASE 0xFE000000 -#define CONFIG_SYS_FLASH_SIZE 0x02000000 -#if !defined(CONFIG_SYS_LOWBOOT) -#error "CONFIG_SYS_LOWBOOT not defined?" -#else /* CONFIG_SYS_LOWBOOT */ -#if defined(CONFIG_SYS_LOWBOOT32) -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x00060000) -#endif -#endif /* CONFIG_SYS_LOWBOOT */ - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max num of sects on one chip */ -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT -#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_CS0_START} -#define CONFIG_SYS_FLASH_BANKS_SIZES {CONFIG_SYS_CS0_SIZE} - -/* - * Environment settings - */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SIZE 0x10000 -#define CONFIG_ENV_SECT_SIZE 0x20000 -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE - -#define CONFIG_ENV_OVERWRITE 1 - -/* - * Memory map - */ -#define CONFIG_SYS_MBAR 0xF0000000 -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_DEFAULT_MBAR 0x80000000 - -/* Use SRAM until RAM will be available */ -#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM -#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE /* Size of used area in DPRAM */ - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -# define CONFIG_SYS_RAMBOOT 1 -#endif - -#define CONFIG_SYS_MONITOR_LEN (384 << 10) /* Reserve 384 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/* - * Ethernet configuration - */ -#define CONFIG_MPC5xxx_FEC 1 -#define CONFIG_MPC5xxx_FEC_MII100 -/* - * Define CONFIG_MPC5xxx_FEC_MII10 to force FEC at 10Mb - */ -/* #define CONFIG_MPC5xxx_FEC_MII10 */ -#define CONFIG_PHY_ADDR 0x1f -#define CONFIG_PHY_TYPE 0x79c874 /* AMD Phy Controller */ - -/* - * GPIO configuration - */ -#define CONFIG_SYS_GPS_PORT_CONFIG 0x18000004 - -/* - * Miscellaneous configurable options - */ -#define CONFIG_CMDLINE_EDITING 1 -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -/* - * Various low-level settings - */ -#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI -#define CONFIG_SYS_HID0_FINAL HID0_ICE -/* Flash at CSBoot, CS0 */ -#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE -#define CONFIG_SYS_BOOTCS_CFG 0x0002DD00 -#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE -/* External SRAM at CS1 */ -#define CONFIG_SYS_CS1_START 0x62000000 -#define CONFIG_SYS_CS1_SIZE 0x00400000 -#define CONFIG_SYS_CS1_CFG 0x00009930 -#define CONFIG_SYS_SRAM_BASE CONFIG_SYS_CS1_START -#define CONFIG_SYS_SRAM_SIZE CONFIG_SYS_CS1_SIZE -/* LED display at CS7 */ -#define CONFIG_SYS_CS7_START 0x6a000000 -#define CONFIG_SYS_CS7_SIZE (64*1024) -#define CONFIG_SYS_CS7_CFG 0x0000bf30 - -#define CONFIG_SYS_CS_BURST 0x00000000 -#define CONFIG_SYS_CS_DEADCYCLE 0x33333003 - -#define CONFIG_SYS_RESET_ADDRESS 0xff000000 - -/*----------------------------------------------------------------------- - * USB stuff - *----------------------------------------------------------------------- - */ -#define CONFIG_USB_CLOCK 0x0001BBBB -#define CONFIG_USB_CONFIG 0x00001000 /* 0x4000 for SE mode */ - -/*----------------------------------------------------------------------- - * IDE/ATA stuff Supports IDE harddisk - *----------------------------------------------------------------------- - */ - -#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */ - -#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ -#undef CONFIG_IDE_LED /* LED for ide not supported */ - -#define CONFIG_IDE_PREINIT - -#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ -#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 2 drives per IDE bus */ - -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 - -#define CONFIG_SYS_ATA_BASE_ADDR MPC5XXX_ATA - -/* Offset for data I/O */ -#define CONFIG_SYS_ATA_DATA_OFFSET (0x0060) - -/* Offset for normal register accesses */ -#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET) - -/* Offset for alternate registers */ -#define CONFIG_SYS_ATA_ALT_OFFSET (0x005C) - -/* Interval between registers */ -#define CONFIG_SYS_ATA_STRIDE 4 - -#define CONFIG_ATAPI 1 - -/*----------------------------------------------------------------------- - * Open firmware flat tree support - *----------------------------------------------------------------------- - */ -#define OF_CPU "PowerPC,5200@0" -#define OF_SOC "soc5200@f0000000" -#define OF_TBCLK (bd->bi_busfreq / 4) -#define OF_STDOUT_PATH "/soc5200@f0000000/serial@2000" - -/* Support for the 7-segment display */ -#define CONFIG_SYS_DISP_CHR_RAM CONFIG_SYS_CS7_START -#define CONFIG_SHOW_ACTIVITY /* used for display realization */ - -#define CONFIG_SHOW_BOOT_PROGRESS - -#endif /* __CONFIG_H */ diff --git a/include/configs/ac14xx.h b/include/configs/ac14xx.h deleted file mode 100644 index 4eb8f39aaf..0000000000 --- a/include/configs/ac14xx.h +++ /dev/null @@ -1,516 +0,0 @@ -/* - * (C) Copyright 2009 Wolfgang Denk wd@denx.de - * (C) Copyright 2010 DAVE Srl <www.dave.eu> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * ifm AC14xx (MPC5121e based) board configuration file - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_AC14XX 1 - -/* - * Memory map for the ifm AC14xx board: - * - * 0x0000_0000-0x0FFF_FFFF DDR RAM (256 MB) - * 0x3000_0000-0x3001_FFFF On Chip SRAM (128 KB) - * 0x8000_0000-0x803F_FFFF IMMR (4 MB) - * 0xE000_0000-0xEFFF_FFFF several LPB attached hardware (CSx) - * 0xFC00_0000-0xFFFF_FFFF NOR Boot FLASH (64 MB) - */ - -/* - * High Level Configuration Options - */ -#define CONFIG_E300 1 /* E300 Family */ - -#define CONFIG_SYS_TEXT_BASE 0xFFF00000 - -#define CONFIG_SYS_MPC512X_CLKIN 25000000 /* in Hz */ -#define SCFR1_IPS_DIV 2 -#define SCFR1_LPC_DIV 2 -#define SCFR1_NFC_DIV 2 -#define SCFR1_DIU_DIV 240 - -#define CONFIG_MISC_INIT_R - -#define CONFIG_SYS_IMMR 0x80000000 -#define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_IMMR + 0x2100) - -/* more aggressive 'mtest' over a wider address range */ -#define CONFIG_SYS_ALT_MEMTEST -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest region */ -#define CONFIG_SYS_MEMTEST_END 0x0FE00000 - -/* - * DDR Setup - manually set all parameters as there's no SPD etc. - */ -#define CONFIG_SYS_DDR_SIZE 256 /* MB */ -#define CONFIG_SYS_DDR_BASE 0x00000000 -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE -#define CONFIG_SYS_MAX_RAM_SIZE 0x20000000 - -/* - * DDR Controller Configuration - * - * SYS_CFG: - * [31:31] MDDRC Soft Reset: Diabled - * [30:30] DRAM CKE pin: Enabled - * [29:29] DRAM CLK: Enabled - * [28:28] Command Mode: Enabled (For initialization only) - * [27:25] DRAM Row Select: dram_row[15:0] = magenta_address[25:10] - * [24:21] DRAM Bank Select: dram_bank[1:0] = magenta_address[11:10] - * [20:19] Read Test: DON'T USE - * [18:18] Self Refresh: Enabled - * [17:17] 16bit Mode: Disabled - * [16:13] Ready Delay: 2 - * [12:12] Half DQS Delay: Disabled - * [11:11] Quarter DQS Delay: Disabled - * [10:08] Write Delay: 2 - * [07:07] Early ODT: Disabled - * [06:06] On DIE Termination: Disabled - * [05:05] FIFO Overflow Clear: DON'T USE here - * [04:04] FIFO Underflow Clear: DON'T USE here - * [03:03] FIFO Overflow Pending: DON'T USE here - * [02:02] FIFO Underlfow Pending: DON'T USE here - * [01:01] FIFO Overlfow Enabled: Enabled - * [00:00] FIFO Underflow Enabled: Enabled - * TIME_CFG0 - * [31:16] DRAM Refresh Time: 0 CSB clocks - * [15:8] DRAM Command Time: 0 CSB clocks - * [07:00] DRAM Precharge Time: 0 CSB clocks - * TIME_CFG1 - * [31:26] DRAM tRFC: - * [25:21] DRAM tWR1: - * [20:17] DRAM tWRT1: - * [16:11] DRAM tDRR: - * [10:05] DRAM tRC: - * [04:00] DRAM tRAS: - * TIME_CFG2 - * [31:28] DRAM tRCD: - * [27:23] DRAM tFAW: - * [22:19] DRAM tRTW1: - * [18:15] DRAM tCCD: - * [14:10] DRAM tRTP: - * [09:05] DRAM tRP: - * [04:00] DRAM tRPA - */ - -/* - * NOTE: although this board uses DDR1 only, the common source brings defaults - * for DDR2 init sequences, that's why we have to keep those here as well - */ - -/* DDR1 -- 32bit, drive strength (pad configuration) 3 for control and data */ -#define CONFIG_SYS_IOCTRL_MUX_DDR ((0 << 6) | (3 << 3) | (3 << 0)) - -#define CONFIG_SYS_MDDRC_SYS_CFG (/* 0xEAA09100 */ 0 \ - | (1 << 31) /* RST_B */ \ - | (1 << 30) /* CKE */ \ - | (1 << 29) /* CLK_ON */ \ - | (0 << 28) /* CMD_MODE */ \ - | (5 << 25) /* DRAM_ROW_SELECT */ \ - | (5 << 21) /* DRAM_BANK_SELECT */ \ - | (0 << 18) /* SELF_REF_EN */ \ - | (0 << 17) /* 16BIT_MODE */ \ - | (4 << 13) /* RDLY */ \ - | (1 << 12) /* HALF_DQS_DLY */ \ - | (0 << 11) /* QUART_DQS_DLY */ \ - | (1 << 8) /* WDLY */ \ - | (0 << 7) /* EARLY_ODT */ \ - | (0 << 6) /* ON_DIE_TERMINATE */ \ - | (0 << 5) /* FIFO_OV_CLEAR */ \ - | (0 << 4) /* FIFO_UV_CLEAR */ \ - | (0 << 1) /* FIFO_OV_EN */ \ - | (0 << 0) /* FIFO_UV_EN */ \ - ) - -#define CONFIG_SYS_MDDRC_TIME_CFG0 0x04E03124 -#define CONFIG_SYS_MDDRC_TIME_CFG1 0x30CA1147 -#define CONFIG_SYS_MDDRC_TIME_CFG2 0x32B10864 - -/* register address only, i.e. template without values */ -#define CONFIG_SYS_MICRON_BMODE 0x01000000 -#define CONFIG_SYS_MICRON_EMODE 0x01010000 -#define CONFIG_SYS_MICRON_EMODE2 0x01020000 -#define CONFIG_SYS_MICRON_EMODE3 0x01030000 -/* - * values for mode registers (without mode register address) - */ -/* CAS 2.5 (6), burst seq (0) and length 4 (2) */ -#define CONFIG_SYS_MICRON_BMODE_PARAM 0x00000062 -#define CONFIG_SYS_MICRON_BMODE_RSTDLL 0x00000100 -/* DLL enable, reduced drive strength */ -#define CONFIG_SYS_MICRON_EMODE_PARAM 0x00000002 - -#define CONFIG_SYS_DDRCMD_NOP 0x01380000 -#define CONFIG_SYS_DDRCMD_PCHG_ALL 0x01100400 -#define CONFIG_SYS_MICRON_EMR ((1 << 24) | /* CMD_REQ */ \ - (0 << 22) | /* DRAM_CS */ \ - (0 << 21) | /* DRAM_RAS */ \ - (0 << 20) | /* DRAM_CAS */ \ - (0 << 19) | /* DRAM_WEB */ \ - (1 << 16) | /* DRAM_BS[2:0] */ \ - (0 << 15) | /* */ \ - (0 << 12) | /* A12->out */ \ - (0 << 11) | /* A11->RDQS */ \ - (0 << 10) | /* A10->DQS# */ \ - (0 << 7) | /* OCD program */ \ - (0 << 6) | /* Rtt1 */ \ - (0 << 3) | /* posted CAS# */ \ - (0 << 2) | /* Rtt0 */ \ - (1 << 1) | /* ODS */ \ - (0 << 0) /* DLL */ \ - ) -#define CONFIG_SYS_MICRON_EMR2 0x01020000 -#define CONFIG_SYS_MICRON_EMR3 0x01030000 -#define CONFIG_SYS_DDRCMD_RFSH 0x01080000 -#define CONFIG_SYS_MICRON_INIT_DEV_OP 0x01000432 -#define CONFIG_SYS_MICRON_EMR_OCD ((1 << 24) | /* CMD_REQ */ \ - (0 << 22) | /* DRAM_CS */ \ - (0 << 21) | /* DRAM_RAS */ \ - (0 << 20) | /* DRAM_CAS */ \ - (0 << 19) | /* DRAM_WEB */ \ - (1 << 16) | /* DRAM_BS[2:0] */ \ - (0 << 15) | /* */ \ - (0 << 12) | /* A12->out */ \ - (0 << 11) | /* A11->RDQS */ \ - (1 << 10) | /* A10->DQS# */ \ - (7 << 7) | /* OCD program */ \ - (0 << 6) | /* Rtt1 */ \ - (0 << 3) | /* posted CAS# */ \ - (1 << 2) | /* Rtt0 */ \ - (0 << 1) | /* ODS */ \ - (0 << 0) /* DLL */ \ - ) - -/* - * Backward compatible definitions, - * so we do not have to change arch/powerpc/cpu/mpc512x/fixed_sdram.c - */ -#define CONFIG_SYS_DDRCMD_EM2 (CONFIG_SYS_MICRON_EMR2) -#define CONFIG_SYS_DDRCMD_EM3 (CONFIG_SYS_MICRON_EMR3) -#define CONFIG_SYS_DDRCMD_EN_DLL (CONFIG_SYS_MICRON_EMR) -#define CONFIG_SYS_DDRCMD_OCD_DEFAULT (CONFIG_SYS_MICRON_EMR_OCD) - -/* DDR Priority Manager Configuration */ -#define CONFIG_SYS_MDDRCGRP_PM_CFG1 0x00077777 -#define CONFIG_SYS_MDDRCGRP_PM_CFG2 0x00000000 -#define CONFIG_SYS_MDDRCGRP_HIPRIO_CFG 0x00000001 -#define CONFIG_SYS_MDDRCGRP_LUT0_MU 0xFFEEDDCC -#define CONFIG_SYS_MDDRCGRP_LUT0_ML 0xBBAAAAAA -#define CONFIG_SYS_MDDRCGRP_LUT1_MU 0x66666666 -#define CONFIG_SYS_MDDRCGRP_LUT1_ML 0x55555555 -#define CONFIG_SYS_MDDRCGRP_LUT2_MU 0x44444444 -#define CONFIG_SYS_MDDRCGRP_LUT2_ML 0x44444444 -#define CONFIG_SYS_MDDRCGRP_LUT3_MU 0x55555555 -#define CONFIG_SYS_MDDRCGRP_LUT3_ML 0x55555558 -#define CONFIG_SYS_MDDRCGRP_LUT4_MU 0x11111111 -#define CONFIG_SYS_MDDRCGRP_LUT4_ML 0x11111122 -#define CONFIG_SYS_MDDRCGRP_LUT0_AU 0xaaaaaaaa -#define CONFIG_SYS_MDDRCGRP_LUT0_AL 0xaaaaaaaa -#define CONFIG_SYS_MDDRCGRP_LUT1_AU 0x66666666 -#define CONFIG_SYS_MDDRCGRP_LUT1_AL 0x66666666 -#define CONFIG_SYS_MDDRCGRP_LUT2_AU 0x11111111 -#define CONFIG_SYS_MDDRCGRP_LUT2_AL 0x11111111 -#define CONFIG_SYS_MDDRCGRP_LUT3_AU 0x11111111 -#define CONFIG_SYS_MDDRCGRP_LUT3_AL 0x11111111 -#define CONFIG_SYS_MDDRCGRP_LUT4_AU 0x11111111 -#define CONFIG_SYS_MDDRCGRP_LUT4_AL 0x11111111 - -/* - * NOR FLASH on the Local Bus - */ -#define CONFIG_SYS_FLASH_CFI /* use the CFI code */ -#define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */ -#define CONFIG_SYS_FLASH_BASE 0xFC000000 /* start of FLASH */ -#define CONFIG_SYS_FLASH_SIZE 0x04000000 /* max flash size */ - -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ -#define CONFIG_SYS_FLASH_BANKS_LIST { \ - CONFIG_SYS_FLASH_BASE + 0 * CONFIG_SYS_FLASH_SIZE, \ - } -#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max sectors per device */ - -#undef CONFIG_SYS_FLASH_CHECKSUM -#define CONFIG_SYS_FLASH_PROTECTION - -/* - * SRAM support - */ -#define CONFIG_SYS_SRAM_BASE 0x30000000 -#define CONFIG_SYS_SRAM_SIZE 0x00020000 /* 128 KB */ - -/* - * CS related parameters - */ -/* CS0 Flash */ -#define CONFIG_SYS_CS0_CFG 0x00031110 -#define CONFIG_SYS_CS0_START 0xFC000000 -#define CONFIG_SYS_CS0_SIZE 0x04000000 -/* CS1 FRAM */ -#define CONFIG_SYS_CS1_CFG 0x00011000 -#define CONFIG_SYS_CS1_START 0xE0000000 -#define CONFIG_SYS_CS1_SIZE 0x00010000 -/* CS2 AS-i 1 */ -#define CONFIG_SYS_CS2_CFG 0x00009100 -#define CONFIG_SYS_CS2_START 0xE0100000 -#define CONFIG_SYS_CS2_SIZE 0x00080000 -/* CS3 netX */ -#define CONFIG_SYS_CS3_CFG 0x000A1140 -#define CONFIG_SYS_CS3_START 0xE0300000 -#define CONFIG_SYS_CS3_SIZE 0x00020000 -/* CS5 safety */ -#define CONFIG_SYS_CS5_CFG 0x0011F000 -#define CONFIG_SYS_CS5_START 0xE0400000 -#define CONFIG_SYS_CS5_SIZE 0x00010000 -/* CS6 AS-i 2 */ -#define CONFIG_SYS_CS6_CFG 0x00009100 -#define CONFIG_SYS_CS6_START 0xE0200000 -#define CONFIG_SYS_CS6_SIZE 0x00080000 - -/* Don't use alternative CS timing for any CS */ -#define CONFIG_SYS_CS_ALETIMING 0x00000000 -#define CONFIG_SYS_CS_BURST 0x00000000 -#define CONFIG_SYS_CS_DEADCYCLE 0x00000020 -#define CONFIG_SYS_CS_HOLDCYCLE 0x00000020 - -/* Use SRAM for initial stack */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_SRAM_BASE -#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_SRAM_SIZE - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) - -#ifdef CONFIG_FSL_DIU_FB -#define CONFIG_SYS_MALLOC_LEN (6 * 1024 * 1024) -#else -#define CONFIG_SYS_MALLOC_LEN (512 * 1024) -#endif - -/* - * Serial Port - */ -#define CONFIG_CONS_INDEX 1 - -/* - * Serial console configuration - */ -#define CONFIG_PSC_CONSOLE 3 /* console on PSC3 */ -#define CONFIG_SYS_PSC3 -#if CONFIG_PSC_CONSOLE != 3 -#error CONFIG_PSC_CONSOLE must be 3 -#endif - -#define CONSOLE_FIFO_TX_SIZE FIFOC_PSC3_TX_SIZE -#define CONSOLE_FIFO_TX_ADDR FIFOC_PSC3_TX_ADDR -#define CONSOLE_FIFO_RX_SIZE FIFOC_PSC3_RX_SIZE -#define CONSOLE_FIFO_RX_ADDR FIFOC_PSC3_RX_ADDR - -/* - * Clocks in use - */ -#define SCCR1_CLOCKS_EN (CLOCK_SCCR1_CFG_EN | \ - CLOCK_SCCR1_LPC_EN | \ - CLOCK_SCCR1_PSC_EN(CONFIG_PSC_CONSOLE) | \ - CLOCK_SCCR1_PSC_EN(7) | \ - CLOCK_SCCR1_PSCFIFO_EN | \ - CLOCK_SCCR1_DDR_EN | \ - CLOCK_SCCR1_FEC_EN | \ - CLOCK_SCCR1_TPR_EN) - -#define SCCR2_CLOCKS_EN (CLOCK_SCCR2_MEM_EN | \ - CLOCK_SCCR2_SPDIF_EN | \ - CLOCK_SCCR2_DIU_EN | \ - CLOCK_SCCR2_I2C_EN) - -#define CONFIG_CMDLINE_EDITING 1 /* command line history */ - -/* - * IIM - IC Identification Module - */ -#undef CONFIG_FSL_IIM - -/* - * Ethernet configuration - */ -#define CONFIG_MPC512x_FEC 1 -#define CONFIG_PHY_ADDR 0x1F -#define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_FEC_AN_TIMEOUT 1 -#define CONFIG_HAS_ETH0 - -/* - * Environment - */ -#define CONFIG_ENV_IS_IN_FLASH 1 -/* This has to be a multiple of the flash sector size */ -#define CONFIG_ENV_ADDR 0xFFF40000 -#define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_SECT_SIZE 0x20000 - -/* Address and size of Redundant Environment Sector */ -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + \ - CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) - -#define CONFIG_LOADS_ECHO 1 -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 - -#define CONFIG_CMD_REGINFO - -#if defined(CONFIG_PCI) -#define CONFIG_CMD_PCI -#endif - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ - -#ifdef CONFIG_CMD_KGDB -# define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -# define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif - -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -/* max number of command args */ -#define CONFIG_SYS_MAXARGS 32 -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) - -/* Cache Configuration */ -#define CONFIG_SYS_DCACHE_SIZE 32768 -#define CONFIG_SYS_CACHELINE_SIZE 32 -#ifdef CONFIG_CMD_KGDB -#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of 32 */ -#endif - -#define CONFIG_SYS_HID0_INIT 0x000000000 -#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \ - HID0_ICE) -#define CONFIG_SYS_HID2 HID2_HBE - -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ - -#ifdef CONFIG_CMD_KGDB -#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ -#endif - -/* - * Environment Configuration - */ -#define CONFIG_ENV_OVERWRITE -#define CONFIG_TIMESTAMP - -/* default load addr for tftp and bootm */ -#define CONFIG_LOADADDR 400000 - - -/* the builtin environment and standard greeting */ -#define CONFIG_PREBOOT "echo;" \ - "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ - "echo" - -#define CONFIG_EXTRA_ENV_SETTINGS_DEVEL \ - "muster_nr=-00\0" \ - "fromram=run ramargs addip addtty; " \ - "tftp ${fdt_addr_r} ac14xx/ac14xx.dtb${muster_nr}; " \ - "tftp ${kernel_addr_r} ac14xx/uImage${muster_nr}; " \ - "tftp ${ramdisk_addr_r} ac14xx/uFS${muster_nr}; " \ - "bootm ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}\0" \ - "fromnfs=run nfsargs addip addtty; " \ - "tftp ${fdt_addr_r} ac14xx/ac14xx.dtb${muster_nr}; " \ - "tftp ${kernel_addr_r} ac14xx/uImage${muster_nr}; " \ - "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \ - "fromflash=run nfsargs addip addtty; " \ - "bootm fc020000 - fc000000\0" \ - "mtdargsrec=setenv bootargs root=/dev/mtdblock1 ro\0" \ - "recovery=run mtdargsrec addip addtty; " \ - "bootm ffd20000 - ffee0000\0" \ - "production=run ramargs addip addtty; " \ - "bootm fc020000 fc400000 fc000000\0" \ - "mtdargs=setenv bootargs root=/dev/mtdblock1 ro\0" \ - "prodmtd=run mtdargs addip addtty; " \ - "bootm fc020000 - fc000000\0" \ - "" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "u-boot_addr_r=200000\0" \ - "kernel_addr_r=600000\0" \ - "fdt_addr_r=a00000\0" \ - "ramdisk_addr_r=b00000\0" \ - "u-boot_addr=FFF00000\0" \ - "kernel_addr=FC020000\0" \ - "fdt_addr=FC000000\0" \ - "ramdisk_addr=FC400000\0" \ - "verify=n\0" \ - "ramdiskfile=ac14xx/uRamdisk\0" \ - "u-boot=ac14xx/u-boot.bin\0" \ - "bootfile=ac14xx/uImage\0" \ - "fdtfile=ac14xx/ac14xx.dtb\0" \ - "netdev=eth0\0" \ - "consdev=ttyPSC0\0" \ - "hostname=ac14xx\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}${muster_nr}\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "addtty=setenv bootargs ${bootargs} " \ - "console=${consdev},${baudrate}\0" \ - "flash_nfs=run nfsargs addip addtty;" \ - "bootm ${kernel_addr} - ${fdt_addr}\0" \ - "flash_self=run ramargs addip addtty;" \ - "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ - "net_nfs=tftp ${kernel_addr_r} ${bootfile};" \ - "tftp ${fdt_addr_r} ${fdtfile};" \ - "run nfsargs addip addtty;" \ - "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \ - "net_self=tftp ${kernel_addr_r} ${bootfile};" \ - "tftp ${ramdisk_addr_r} ${ramdiskfile};" \ - "tftp ${fdt_addr_r} ${fdtfile};" \ - "run ramargs addip addtty;" \ - "bootm ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}\0"\ - "load=tftp ${u-boot_addr_r} ${u-boot}\0" \ - "update=protect off ${u-boot_addr} +${filesize};" \ - "era ${u-boot_addr} +${filesize};" \ - "cp.b ${u-boot_addr_r} ${u-boot_addr} ${filesize}\0" \ - CONFIG_EXTRA_ENV_SETTINGS_DEVEL \ - "upd=run load update\0" \ - "" - -#define CONFIG_BOOTCOMMAND "run production" - -#define CONFIG_ARP_TIMEOUT 200UL - -#define CONFIG_OF_SUPPORT_OLD_DEVICE_TREES 1 - -#define OF_CPU "PowerPC,5121@0" -#define OF_SOC_COMPAT "fsl,mpc5121-immr" -#define OF_TBCLK (bd->bi_busfreq / 4) -#define OF_STDOUT_PATH "/soc@80000000/serial@11300" - -#endif /* __CONFIG_H */ diff --git a/include/configs/aria.h b/include/configs/aria.h deleted file mode 100644 index 0a7ef9919e..0000000000 --- a/include/configs/aria.h +++ /dev/null @@ -1,591 +0,0 @@ -/* - * (C) Copyright 2009 Wolfgang Denk wd@denx.de - * (C) Copyright 2009, DAVE Srl <www.dave.eu> - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Aria board configuration file - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_ARIA 1 - -/* - * Memory map for the ARIA board: - * - * 0x0000_0000-0x0FFF_FFFF DDR RAM (256 MB) - * 0x3000_0000-0x3001_FFFF On Chip SRAM (128 KB) - * 0x3010_0000-0x3011_FFFF On Board SRAM (128 KB) - CS6 - * 0x3020_0000-0x3021_FFFF FPGA (128 KB) - CS2 - * 0x8000_0000-0x803F_FFFF IMMR (4 MB) - * 0x8400_0000-0x82FF_FFFF PCI I/O space (16 MB) - * 0xA000_0000-0xAFFF_FFFF PCI memory space (256 MB) - * 0xB000_0000-0xBFFF_FFFF PCI memory mapped I/O space (256 MB) - * 0xFC00_0000-0xFFFF_FFFF NOR Boot FLASH (64 MB) - */ - -/* - * High Level Configuration Options - */ -#define CONFIG_E300 1 /* E300 Family */ -#define CONFIG_FSL_DIU_FB 1 /* FSL DIU */ - -#define CONFIG_SYS_TEXT_BASE 0xFFF00000 - -/* video */ - -/* CONFIG_PCI is defined at config time */ - -#define CONFIG_SYS_MPC512X_CLKIN 33000000 /* in Hz */ - -#define CONFIG_MISC_INIT_R - -#define CONFIG_SYS_IMMR 0x80000000 -#define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_IMMR+0x2100) - -#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest region */ -#define CONFIG_SYS_MEMTEST_END 0x00400000 - -/* - * DDR Setup - manually set all parameters as there's no SPD etc. - */ -#define CONFIG_SYS_DDR_SIZE 256 /* MB */ -#define CONFIG_SYS_DDR_BASE 0x00000000 -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE -#define CONFIG_SYS_MAX_RAM_SIZE 0x20000000 - -#define CONFIG_SYS_IOCTRL_MUX_DDR 0x00000036 - -/* DDR Controller Configuration - * - * SYS_CFG: - * [31:31] MDDRC Soft Reset: Diabled - * [30:30] DRAM CKE pin: Enabled - * [29:29] DRAM CLK: Enabled - * [28:28] Command Mode: Enabled (For initialization only) - * [27:25] DRAM Row Select: dram_row[15:0] = magenta_address[25:10] - * [24:21] DRAM Bank Select: dram_bank[1:0] = magenta_address[11:10] - * [20:19] Read Test: DON'T USE - * [18:18] Self Refresh: Enabled - * [17:17] 16bit Mode: Disabled - * [16:13] Ready Delay: 2 - * [12:12] Half DQS Delay: Disabled - * [11:11] Quarter DQS Delay: Disabled - * [10:08] Write Delay: 2 - * [07:07] Early ODT: Disabled - * [06:06] On DIE Termination: Disabled - * [05:05] FIFO Overflow Clear: DON'T USE here - * [04:04] FIFO Underflow Clear: DON'T USE here - * [03:03] FIFO Overflow Pending: DON'T USE here - * [02:02] FIFO Underlfow Pending: DON'T USE here - * [01:01] FIFO Overlfow Enabled: Enabled - * [00:00] FIFO Underflow Enabled: Enabled - * TIME_CFG0 - * [31:16] DRAM Refresh Time: 0 CSB clocks - * [15:8] DRAM Command Time: 0 CSB clocks - * [07:00] DRAM Precharge Time: 0 CSB clocks - * TIME_CFG1 - * [31:26] DRAM tRFC: - * [25:21] DRAM tWR1: - * [20:17] DRAM tWRT1: - * [16:11] DRAM tDRR: - * [10:05] DRAM tRC: - * [04:00] DRAM tRAS: - * TIME_CFG2 - * [31:28] DRAM tRCD: - * [27:23] DRAM tFAW: - * [22:19] DRAM tRTW1: - * [18:15] DRAM tCCD: - * [14:10] DRAM tRTP: - * [09:05] DRAM tRP: - * [04:00] DRAM tRPA - */ -#define CONFIG_SYS_MDDRC_SYS_CFG ( (1 << 31) | /* RST_B */ \ - (1 << 30) | /* CKE */ \ - (1 << 29) | /* CLK_ON */ \ - (0 << 28) | /* CMD_MODE */ \ - (4 << 25) | /* DRAM_ROW_SELECT */ \ - (3 << 21) | /* DRAM_BANK_SELECT */ \ - (0 << 18) | /* SELF_REF_EN */ \ - (0 << 17) | /* 16BIT_MODE */ \ - (2 << 13) | /* RDLY */ \ - (0 << 12) | /* HALF_DQS_DLY */ \ - (1 << 11) | /* QUART_DQS_DLY */ \ - (2 << 8) | /* WDLY */ \ - (0 << 7) | /* EARLY_ODT */ \ - (1 << 6) | /* ON_DIE_TERMINATE */ \ - (0 << 5) | /* FIFO_OV_CLEAR */ \ - (0 << 4) | /* FIFO_UV_CLEAR */ \ - (0 << 1) | /* FIFO_OV_EN */ \ - (0 << 0) /* FIFO_UV_EN */ \ - ) - -#define CONFIG_SYS_MDDRC_TIME_CFG0 0x030C3D2E -#define CONFIG_SYS_MDDRC_TIME_CFG1 0x55D81189 -#define CONFIG_SYS_MDDRC_TIME_CFG2 0x34790863 - -#define CONFIG_SYS_DDRCMD_NOP 0x01380000 -#define CONFIG_SYS_DDRCMD_PCHG_ALL 0x01100400 -#define CONFIG_SYS_MICRON_EMR ( (1 << 24) | /* CMD_REQ */ \ - (0 << 22) | /* DRAM_CS */ \ - (0 << 21) | /* DRAM_RAS */ \ - (0 << 20) | /* DRAM_CAS */ \ - (0 << 19) | /* DRAM_WEB */ \ - (1 << 16) | /* DRAM_BS[2:0] */ \ - (0 << 15) | /* */ \ - (0 << 12) | /* A12->out */ \ - (0 << 11) | /* A11->RDQS */ \ - (0 << 10) | /* A10->DQS# */ \ - (0 << 7) | /* OCD program */ \ - (0 << 6) | /* Rtt1 */ \ - (0 << 3) | /* posted CAS# */ \ - (0 << 2) | /* Rtt0 */ \ - (1 << 1) | /* ODS */ \ - (0 << 0) /* DLL */ \ - ) -#define CONFIG_SYS_MICRON_EMR2 0x01020000 -#define CONFIG_SYS_MICRON_EMR3 0x01030000 -#define CONFIG_SYS_DDRCMD_RFSH 0x01080000 -#define CONFIG_SYS_MICRON_INIT_DEV_OP 0x01000432 -#define CONFIG_SYS_MICRON_EMR_OCD ( (1 << 24) | /* CMD_REQ */ \ - (0 << 22) | /* DRAM_CS */ \ - (0 << 21) | /* DRAM_RAS */ \ - (0 << 20) | /* DRAM_CAS */ \ - (0 << 19) | /* DRAM_WEB */ \ - (1 << 16) | /* DRAM_BS[2:0] */ \ - (0 << 15) | /* */ \ - (0 << 12) | /* A12->out */ \ - (0 << 11) | /* A11->RDQS */ \ - (1 << 10) | /* A10->DQS# */ \ - (7 << 7) | /* OCD program */ \ - (0 << 6) | /* Rtt1 */ \ - (0 << 3) | /* posted CAS# */ \ - (1 << 2) | /* Rtt0 */ \ - (0 << 1) | /* ODS (Output Drive Strength) */ \ - (0 << 0) /* DLL */ \ - ) - -/* - * Backward compatible definitions, - * so we do not have to change arch/powerpc/cpu/mpc512x/fixed_sdram.c - */ -#define CONFIG_SYS_DDRCMD_EM2 (CONFIG_SYS_MICRON_EMR2) -#define CONFIG_SYS_DDRCMD_EM3 (CONFIG_SYS_MICRON_EMR3) -#define CONFIG_SYS_DDRCMD_EN_DLL (CONFIG_SYS_MICRON_EMR) -#define CONFIG_SYS_DDRCMD_OCD_DEFAULT (CONFIG_SYS_MICRON_EMR_OCD) - -/* DDR Priority Manager Configuration */ -#define CONFIG_SYS_MDDRCGRP_PM_CFG1 0x00077777 -#define CONFIG_SYS_MDDRCGRP_PM_CFG2 0x00000000 -#define CONFIG_SYS_MDDRCGRP_HIPRIO_CFG 0x00000001 -#define CONFIG_SYS_MDDRCGRP_LUT0_MU 0xFFEEDDCC -#define CONFIG_SYS_MDDRCGRP_LUT0_ML 0xBBAAAAAA -#define CONFIG_SYS_MDDRCGRP_LUT1_MU 0x66666666 -#define CONFIG_SYS_MDDRCGRP_LUT1_ML 0x55555555 -#define CONFIG_SYS_MDDRCGRP_LUT2_MU 0x44444444 -#define CONFIG_SYS_MDDRCGRP_LUT2_ML 0x44444444 -#define CONFIG_SYS_MDDRCGRP_LUT3_MU 0x55555555 -#define CONFIG_SYS_MDDRCGRP_LUT3_ML 0x55555558 -#define CONFIG_SYS_MDDRCGRP_LUT4_MU 0x11111111 -#define CONFIG_SYS_MDDRCGRP_LUT4_ML 0x11111122 -#define CONFIG_SYS_MDDRCGRP_LUT0_AU 0xaaaaaaaa -#define CONFIG_SYS_MDDRCGRP_LUT0_AL 0xaaaaaaaa -#define CONFIG_SYS_MDDRCGRP_LUT1_AU 0x66666666 -#define CONFIG_SYS_MDDRCGRP_LUT1_AL 0x66666666 -#define CONFIG_SYS_MDDRCGRP_LUT2_AU 0x11111111 -#define CONFIG_SYS_MDDRCGRP_LUT2_AL 0x11111111 -#define CONFIG_SYS_MDDRCGRP_LUT3_AU 0x11111111 -#define CONFIG_SYS_MDDRCGRP_LUT3_AL 0x11111111 -#define CONFIG_SYS_MDDRCGRP_LUT4_AU 0x11111111 -#define CONFIG_SYS_MDDRCGRP_LUT4_AL 0x11111111 - -/* - * NOR FLASH on the Local Bus - */ -#define CONFIG_SYS_FLASH_CFI /* use the CFI code */ -#define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */ -#define CONFIG_SYS_FLASH_BASE 0xF8000000 /* start of FLASH */ -#define CONFIG_SYS_FLASH_SIZE 0x08000000 /* max flash size */ - -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ -#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE} -#define CONFIG_SYS_MAX_FLASH_SECT 1024 /* max sectors */ - -#undef CONFIG_SYS_FLASH_CHECKSUM - -/* - * NAND FLASH support - * drivers/mtd/nand/mpc5121_nfc.c (rev 2 silicon only) - */ -#define CONFIG_CMD_NAND /* enable NAND support */ -#define CONFIG_JFFS2_NAND /* with JFFS2 on it */ -#define CONFIG_NAND_MPC5121_NFC -#define CONFIG_SYS_NAND_BASE 0x40000000 -#define CONFIG_SYS_MAX_NAND_DEVICE 1 - -/* - * Configuration parameters for MPC5121 NAND driver - */ -#define CONFIG_FSL_NFC_WIDTH 1 -#define CONFIG_FSL_NFC_WRITE_SIZE 2048 -#define CONFIG_FSL_NFC_SPARE_SIZE 64 -#define CONFIG_FSL_NFC_CHIPS CONFIG_SYS_MAX_NAND_DEVICE - -#define CONFIG_SYS_SRAM_BASE 0x30000000 -#define CONFIG_SYS_SRAM_SIZE 0x00020000 /* 128 KB */ - -/* Make two SRAM regions contiguous */ -#define CONFIG_SYS_ARIA_SRAM_BASE (CONFIG_SYS_SRAM_BASE + \ - CONFIG_SYS_SRAM_SIZE) -#define CONFIG_SYS_ARIA_SRAM_SIZE 0x00100000 /* reserve 1MB-window */ -#define CONFIG_SYS_CS6_START CONFIG_SYS_ARIA_SRAM_BASE -#define CONFIG_SYS_CS6_SIZE CONFIG_SYS_ARIA_SRAM_SIZE - -#define CONFIG_SYS_ARIA_FPGA_BASE (CONFIG_SYS_ARIA_SRAM_BASE + \ - CONFIG_SYS_ARIA_SRAM_SIZE) -#define CONFIG_SYS_ARIA_FPGA_SIZE 0x20000 /* 128 KB */ - -#define CONFIG_SYS_CS2_START CONFIG_SYS_ARIA_FPGA_BASE -#define CONFIG_SYS_CS2_SIZE CONFIG_SYS_ARIA_FPGA_SIZE - -#define CONFIG_SYS_CS0_CFG 0x05059150 -#define CONFIG_SYS_CS2_CFG ( (5 << 24) | \ - (5 << 16) | \ - (1 << 15) | \ - (0 << 14) | \ - (0 << 13) | \ - (1 << 12) | \ - (0 << 10) | \ - (3 << 8) | /* 32 bit */ \ - (0 << 7) | \ - (1 << 6) | \ - (1 << 4) | \ - (0 << 3) | \ - (0 << 2) | \ - (0 << 1) | \ - (0 << 0) \ - ) -#define CONFIG_SYS_CS6_CFG 0x05059150 - -/* Use alternative CS timing for CS0 and CS2 */ -#define CONFIG_SYS_CS_ALETIMING 0x00000005 - -/* Use SRAM for initial stack */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_SRAM_BASE -#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_SRAM_SIZE - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_MONITOR_LEN (384 * 1024) - -#ifdef CONFIG_FSL_DIU_FB -#define CONFIG_SYS_MALLOC_LEN (6 * 1024 * 1024) -#else -#define CONFIG_SYS_MALLOC_LEN (512 * 1024) -#endif - -/* FPGA */ -#define CONFIG_ARIA_FPGA 1 - -/* - * Serial Port - */ -#define CONFIG_CONS_INDEX 1 - -/* - * Serial console configuration - */ -#define CONFIG_PSC_CONSOLE 3 /* console on PSC3 */ -#define CONFIG_SYS_PSC3 -#if CONFIG_PSC_CONSOLE != 3 -#error CONFIG_PSC_CONSOLE must be 3 -#endif - -#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} - -#define CONSOLE_FIFO_TX_SIZE FIFOC_PSC3_TX_SIZE -#define CONSOLE_FIFO_TX_ADDR FIFOC_PSC3_TX_ADDR -#define CONSOLE_FIFO_RX_SIZE FIFOC_PSC3_RX_SIZE -#define CONSOLE_FIFO_RX_ADDR FIFOC_PSC3_RX_ADDR - -#define CONFIG_CMDLINE_EDITING 1 /* command line history */ - -/* - * PCI - */ -#ifdef CONFIG_PCI -#define CONFIG_PCI_INDIRECT_BRIDGE - -#define CONFIG_SYS_PCI_MEM_BASE 0xA0000000 -#define CONFIG_SYS_PCI_MEM_PHYS CONFIG_SYS_PCI_MEM_BASE -#define CONFIG_SYS_PCI_MEM_SIZE 0x10000000 /* 256M */ -#define CONFIG_SYS_PCI_MMIO_BASE (CONFIG_SYS_PCI_MEM_BASE + \ - CONFIG_SYS_PCI_MEM_SIZE) -#define CONFIG_SYS_PCI_MMIO_PHYS CONFIG_SYS_PCI_MMIO_BASE -#define CONFIG_SYS_PCI_MMIO_SIZE 0x10000000 /* 256M */ -#define CONFIG_SYS_PCI_IO_BASE 0x00000000 -#define CONFIG_SYS_PCI_IO_PHYS 0x84000000 -#define CONFIG_SYS_PCI_IO_SIZE 0x01000000 /* 16M */ - -#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ - -#endif - -/* - * IIM - IC Identification Module - */ -#undef CONFIG_FSL_IIM - -/* - * Ethernet configuration - */ -#define CONFIG_MPC512x_FEC 1 -#define CONFIG_PHY_ADDR 0x17 -#define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_FEC_AN_TIMEOUT 1 -#define CONFIG_HAS_ETH0 - -/* - * Environment - */ -#define CONFIG_ENV_IS_IN_FLASH 1 -/* This has to be a multiple of the flash sector size */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \ - CONFIG_SYS_MONITOR_LEN) -#define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_SECT_SIZE 0x20000 /* one sector (256K) */ - -/* Address and size of Redundant Environment Sector */ -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + \ - CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) - -#define CONFIG_LOADS_ECHO 1 -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 - -#define CONFIG_CMD_REGINFO - -#if defined(CONFIG_PCI) -#define CONFIG_CMD_PCI -#endif - -/* - * Dynamic MTD partition support - */ -#define CONFIG_CMD_MTDPARTS -#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ -#define CONFIG_FLASH_CFI_MTD -#define MTDIDS_DEFAULT "nor0=f8000000.flash,nand0=mpc5121.nand" - -/* - * NOR flash layout: - * - * F8000000 - FEAFFFFF 107 MiB User Data - * FEB00000 - FFAFFFFF 16 MiB Root File System - * FFB00000 - FFFEFFFF 4 MiB Linux Kernel - * FFF00000 - FFFBFFFF 768 KiB U-Boot (up to 512 KiB) and 2 x * env - * FFFC0000 - FFFFFFFF 256 KiB Device Tree - * - * NAND flash layout: one big partition - */ -#define MTDPARTS_DEFAULT "mtdparts=f8000000.flash:107m(user)," \ - "16m(rootfs)," \ - "4m(kernel)," \ - "768k(u-boot)," \ - "256k(dtb);" \ - "mpc5121.nand:-(data)" - -/* - * Watchdog timeout = CONFIG_SYS_WATCHDOG_VALUE * 65536 / IPS clock. - * For example, when IPS is set to 66MHz and CONFIG_SYS_WATCHDOG_VALUE - * is set to 0xFFFF, watchdog timeouts after about 64s. For details - * refer to chapter 36 of the MPC5121e Reference Manual. - */ -/* #define CONFIG_WATCHDOG */ /* enable watchdog */ -#define CONFIG_SYS_WATCHDOG_VALUE 0xFFFF - - /* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ - -#ifdef CONFIG_CMD_KGDB -# define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -# define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif - -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -/* max number of command args */ -#define CONFIG_SYS_MAXARGS 32 -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -/* - * For booting Linux, the board info and command line data - * have to be in the first 256 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (256 << 20) - -/* Cache Configuration */ -#define CONFIG_SYS_DCACHE_SIZE 32768 -#define CONFIG_SYS_CACHELINE_SIZE 32 -#ifdef CONFIG_CMD_KGDB -#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of 32 */ -#endif - -#define CONFIG_SYS_HID0_INIT 0x000000000 -#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \ - HID0_ICE) -#define CONFIG_SYS_HID2 HID2_HBE - -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ - -#ifdef CONFIG_CMD_KGDB -#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ -#endif - -/* - * Environment Configuration - */ -#define CONFIG_ENV_OVERWRITE -#define CONFIG_TIMESTAMP - -#define CONFIG_HOSTNAME aria -#define CONFIG_BOOTFILE "aria/uImage" -#define CONFIG_ROOTPATH "/opt/eldk/ppc_6xx" - -#define CONFIG_LOADADDR 400000 /* default load addr */ - -#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ - -#define CONFIG_PREBOOT "echo;" \ - "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ - "echo" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "u-boot_addr_r=200000\0" \ - "kernel_addr_r=600000\0" \ - "fdt_addr_r=880000\0" \ - "ramdisk_addr_r=900000\0" \ - "u-boot_addr=FFF00000\0" \ - "kernel_addr=FFB00000\0" \ - "fdt_addr=FFFC0000\0" \ - "ramdisk_addr=FEB00000\0" \ - "ramdiskfile=aria/uRamdisk\0" \ - "u-boot=aria/u-boot.bin\0" \ - "fdtfile=aria/aria.dtb\0" \ - "netdev=eth0\0" \ - "consdev=ttyPSC0\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "addtty=setenv bootargs ${bootargs} " \ - "console=${consdev},${baudrate}\0" \ - "flash_nfs=run nfsargs addip addtty;" \ - "bootm ${kernel_addr} - ${fdt_addr}\0" \ - "flash_self=run ramargs addip addtty;" \ - "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ - "net_nfs=tftp ${kernel_addr_r} ${bootfile};" \ - "tftp ${fdt_addr_r} ${fdtfile};" \ - "run nfsargs addip addtty;" \ - "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \ - "net_self=tftp ${kernel_addr_r} ${bootfile};" \ - "tftp ${ramdisk_addr_r} ${ramdiskfile};" \ - "tftp ${fdt_addr_r} ${fdtfile};" \ - "run ramargs addip addtty;" \ - "bootm ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}\0"\ - "load=tftp ${u-boot_addr_r} ${u-boot}\0" \ - "update=protect off ${u-boot_addr} +${filesize};" \ - "era ${u-boot_addr} +${filesize};" \ - "cp.b ${u-boot_addr_r} ${u-boot_addr} ${filesize}\0" \ - "upd=run load update\0" \ - "" - -#define CONFIG_BOOTCOMMAND "run flash_self" - -#define CONFIG_OF_SUPPORT_OLD_DEVICE_TREES 1 - -#define OF_CPU "PowerPC,5121@0" -#define OF_SOC_COMPAT "fsl,mpc5121-immr" -#define OF_TBCLK (bd->bi_busfreq / 4) -#define OF_STDOUT_PATH "/soc@80000000/serial@11300" - -/*----------------------------------------------------------------------- - * IDE/ATA stuff - *----------------------------------------------------------------------- - */ - -#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */ -#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ -#undef CONFIG_IDE_LED /* LED for IDE not supported */ - -#define CONFIG_IDE_RESET /* reset for IDE supported */ -#define CONFIG_IDE_PREINIT - -#define CONFIG_SYS_IDE_MAXBUS 1 /* 1 IDE bus */ -#define CONFIG_SYS_IDE_MAXDEVICE 2 /* 1 drive per IDE bus */ - -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 -#define CONFIG_SYS_ATA_BASE_ADDR get_pata_base() - -/* Offset for data I/O RefMan MPC5121EE Table 28-10 */ -#define CONFIG_SYS_ATA_DATA_OFFSET (0x00A0) - -/* Offset for normal register accesses */ -#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET) - -/* Offset for alternate registers RefMan MPC5121EE Table 28-23 */ -#define CONFIG_SYS_ATA_ALT_OFFSET (0x00D8) - -/* Interval between registers */ -#define CONFIG_SYS_ATA_STRIDE 4 - -#define ATA_BASE_ADDR get_pata_base() - -/* - * Control register bit definitions - */ -#define FSL_ATA_CTRL_FIFO_RST_B 0x80000000 -#define FSL_ATA_CTRL_ATA_RST_B 0x40000000 -#define FSL_ATA_CTRL_FIFO_TX_EN 0x20000000 -#define FSL_ATA_CTRL_FIFO_RCV_EN 0x10000000 -#define FSL_ATA_CTRL_DMA_PENDING 0x08000000 -#define FSL_ATA_CTRL_DMA_ULTRA 0x04000000 -#define FSL_ATA_CTRL_DMA_WRITE 0x02000000 -#define FSL_ATA_CTRL_IORDY_EN 0x01000000 - -/* Clocks in use */ -#define SCCR1_CLOCKS_EN (CLOCK_SCCR1_CFG_EN | \ - CLOCK_SCCR1_LPC_EN | \ - CLOCK_SCCR1_PSC_EN(CONFIG_PSC_CONSOLE) | \ - CLOCK_SCCR1_PSCFIFO_EN | \ - CLOCK_SCCR1_DDR_EN | \ - CLOCK_SCCR1_FEC_EN | \ - CLOCK_SCCR1_NFC_EN | \ - CLOCK_SCCR1_PATA_EN | \ - CLOCK_SCCR1_PCI_EN | \ - CLOCK_SCCR1_TPR_EN) - -#define SCCR2_CLOCKS_EN (CLOCK_SCCR2_MEM_EN | \ - CLOCK_SCCR2_SPDIF_EN | \ - CLOCK_SCCR2_DIU_EN | \ - CLOCK_SCCR2_I2C_EN) - -#endif /* __CONFIG_H */ diff --git a/include/configs/canmb.h b/include/configs/canmb.h deleted file mode 100644 index b7c74b4264..0000000000 --- a/include/configs/canmb.h +++ /dev/null @@ -1,199 +0,0 @@ -/* - * (C) Copyright 2005 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC5200 1 /* This is a MPC5200 CPU */ -#define CONFIG_CANMB 1 /* ... on canmb board - we need this for FEC.C */ - -/* - * allowed and functional CONFIG_SYS_TEXT_BASE values: - * 0xfe000000 low boot at 0x00000100 (default board setting) - * 0x00100000 RAM load and test - */ -#define CONFIG_SYS_TEXT_BASE 0xFE000000 - -#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ - -#define CONFIG_BOARD_EARLY_INIT_R - -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ - -/* - * Serial console configuration - */ -#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -/* - * Command line configuration. - */ -#define CONFIG_CMD_REGINFO - -/* - * MUST be low boot - HIGHBOOT is not supported anymore - */ -#if (CONFIG_SYS_TEXT_BASE == 0xFE000000) /* Boot low with 32 MB Flash */ -# define CONFIG_SYS_LOWBOOT 1 -# define CONFIG_SYS_LOWBOOT16 1 -#else -# error "CONFIG_SYS_TEXT_BASE must be 0xFE000000" -#endif - -/* - * Autobooting - */ - -#define CONFIG_PREBOOT "echo;" \ - "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ - "echo" - -#undef CONFIG_BOOTARGS - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "flash_nfs=run nfsargs addip;" \ - "bootm ${kernel_addr}\0" \ - "flash_self=run ramargs addip;" \ - "bootm ${kernel_addr} ${ramdisk_addr}\0" \ - "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ - "rootpath=/opt/eldk/ppc_6xx\0" \ - "bootfile=/tftpboot/canmb/uImage\0" \ - "" - -#define CONFIG_BOOTCOMMAND "run flash_self" - -/* - * IPB Bus clocking configuration. - */ -#undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ - -/* - * Flash configuration, expect one 16 Megabyte Bank at most - */ -#define CONFIG_SYS_FLASH_BASE 0xFE000000 -#define CONFIG_SYS_FLASH_SIZE 0x02000000 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max num of sects on one chip */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ - -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_SYS_FLASH_EMPTY_INFO - -/* - * Environment settings - */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_OFFSET (2*128*1024) -#define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_SECT_SIZE (128*1024) - -/* - * Memory map - * - * Warning!!! with the current BestComm Task, MBAR MUST BE set to 0xf0000000 - */ -#define CONFIG_SYS_MBAR 0xf0000000 /* DO NOT CHANGE this */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_DEFAULT_MBAR 0x80000000 - -/* Use SRAM until RAM will be available */ -#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM -#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE /* Size of used area in DPRAM */ - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -# define CONFIG_SYS_RAMBOOT 1 -#endif - -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/* - * Ethernet configuration - */ -#define CONFIG_MPC5xxx_FEC 1 -#define CONFIG_MPC5xxx_FEC_MII100 -#define CONFIG_PHY_ADDR 0x0 -/* - * GPIO configuration: - * PSC1,2,3 predefined as UART - * PCI disabled - * Ethernet 100 with MD - */ -#define CONFIG_SYS_GPS_PORT_CONFIG 0x00058444 - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -# define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x01f00000 /* 1 ... 31 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x200000 /* default load address */ - -#define CONFIG_RTC_MPC5200 1 /* use internal MPC5200 RTC */ - -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -/* - * Various low-level settings - */ -#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI -#define CONFIG_SYS_HID0_FINAL HID0_ICE - -#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE -#define CONFIG_SYS_BOOTCS_CFG 0x00047D01 -#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE - -#define CONFIG_SYS_CS_BURST 0x00000000 -#define CONFIG_SYS_CS_DEADCYCLE 0x33333333 - -#define CONFIG_SYS_RESET_ADDRESS 0x7f000000 - -#endif /* __CONFIG_H */ diff --git a/include/configs/charon.h b/include/configs/charon.h deleted file mode 100644 index 913b707a5f..0000000000 --- a/include/configs/charon.h +++ /dev/null @@ -1,63 +0,0 @@ -/* - * (C) Copyright 2003-2005 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * (C) Copyright 2004-2006 - * Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de - * - * (C) Copyright 2010 - * Heiko Schocher, DENX Software Engineering, hs@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_CHARON_H -#define __CONFIG_CHARON_H - -#define CONFIG_CHARON -#define CONFIG_HOSTNAME charon - -#define CONFIG_SYS_GPS_PORT_CONFIG 0x81550414 - -/* include common defines/options for TQM52xx boards */ -#include "TQM5200.h" - -/* defines special on charon board */ -#undef CONFIG_RTC_MPC5200 - -#undef CUSTOM_ENV_SETTINGS -#define CUSTOM_ENV_SETTINGS \ - "bootfile=/tftpboot/charon/uImage\0" \ - "fdt_file=/tftpboot/charon/charon.dtb\0" \ - "u-boot=/tftpboot/charon/u-boot.bin\0" \ - "mtdparts=" MTDPARTS_DEFAULT "\0" \ - "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" - -/* additional features on charon board */ -#define CONFIG_RESET_PHY_R - -/* - * I2C configuration - */ -#define CONFIG_I2C_MULTI_BUS - -#define CONFIG_SYS_TFP410_ADDR 0x38 -#define CONFIG_SYS_TFP410_BUS 0 - -/* - * FPGA configuration - */ -#define CONFIG_SYS_CS3_START 0xE8000000 -#define CONFIG_SYS_CS3_SIZE 0x80000 /* 512 KByte */ - -/* - * CS3 Config Register Init: - * CS3 Enabled - * AddrBus: 8bits - * DataBus: 4bytes - * Multiplexed: Yes - * MuxBank: 00 - */ -#define CONFIG_SYS_CS3_CFG 0x00009310 - -#endif /* __CONFIG_CHARON_H */ diff --git a/include/configs/cm5200.h b/include/configs/cm5200.h deleted file mode 100644 index 3777a0d863..0000000000 --- a/include/configs/cm5200.h +++ /dev/null @@ -1,286 +0,0 @@ -/* - * (C) Copyright 2003-2007 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - */ -#define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */ -#define CONFIG_CM5200 1 /* ... on CM5200 platform */ - -#define CONFIG_SYS_TEXT_BASE 0xfc000000 - -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ - -/* - * Supported commands - */ -#define CONFIG_CMD_REGINFO - -/* - * Serial console configuration - */ -#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } - -/* - * Ethernet configuration - */ -#define CONFIG_MPC5xxx_FEC 1 -#define CONFIG_MPC5xxx_FEC_MII100 -#define CONFIG_PHY_ADDR 0x00 -#define CONFIG_ENV_OVERWRITE 1 /* allow overwriting of ethaddr */ -/* use misc_init_r() to read ethaddr from I2C EEPROM (see CONFIG_SYS_I2C_EEPROM) */ -#define CONFIG_MISC_INIT_R 1 -#define CONFIG_MAC_OFFSET 0x35 /* MAC address offset in I2C EEPROM */ - -/* - * POST support - */ -#define CONFIG_POST (CONFIG_SYS_POST_MEMORY | CONFIG_SYS_POST_CPU) -#define MPC5XXX_SRAM_POST_SIZE (MPC5XXX_SRAM_SIZE - 4) -/* List of I2C addresses to be verified by POST */ -#define CONFIG_SYS_POST_I2C_ADDRS {CONFIG_SYS_I2C_SLAVE, \ - CONFIG_SYS_I2C_IO, \ - CONFIG_SYS_I2C_EEPROM} - -/* display image timestamps */ -#define CONFIG_TIMESTAMP 1 - -/* - * Autobooting - */ -#define CONFIG_PREBOOT "echo;" \ - "echo Type "run net_nfs_fdt" to mount root filesystem over NFS;" \ - "echo" -#undef CONFIG_BOOTARGS - -/* - * Default environment settings - */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "netmask=255.255.0.0\0" \ - "ipaddr=192.168.160.33\0" \ - "serverip=192.168.1.1\0" \ - "gatewayip=192.168.1.1\0" \ - "console=ttyPSC0\0" \ - "u-boot_addr=100000\0" \ - "kernel_addr=200000\0" \ - "kernel_addr_flash=fc0c0000\0" \ - "fdt_addr=400000\0" \ - "fdt_addr_flash=fc0a0000\0" \ - "ramdisk_addr=500000\0" \ - "rootpath=/opt/eldk-4.1/ppc_6xx\0" \ - "u-boot=/tftpboot/cm5200/u-boot.bin\0" \ - "bootfile_fdt=/tftpboot/cm5200/uImage\0" \ - "fdt_file=/tftpboot/cm5200/cm5200.dtb\0" \ - "load=tftp ${u-boot_addr} ${u-boot}\0" \ - "update=prot off fc000000 +${filesize}; " \ - "era fc000000 +${filesize}; " \ - "cp.b ${u-boot_addr} fc000000 ${filesize}; " \ - "prot on fc000000 +${filesize}\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "flashargs=setenv bootargs root=/dev/mtdblock5 rw\0" \ - "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ - "addinit=setenv bootargs ${bootargs} init=/linuxrc\0" \ - "addcons=setenv bootargs ${bootargs} " \ - "console=${console},${baudrate}\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:" \ - "${netmask}:${hostname}:${netdev}:off panic=1\0" \ - "flash_flash=run flashargs addinit addip addcons;" \ - "bootm ${kernel_addr_flash} - ${fdt_addr_flash}\0" \ - "net_nfs_fdt=tftp ${kernel_addr} ${bootfile_fdt}; " \ - "tftp ${fdt_addr} ${fdt_file}; run nfsargs addip " \ - "addcons; bootm ${kernel_addr} - ${fdt_addr}\0" \ - "" -#define CONFIG_BOOTCOMMAND "run flash_flash" - -/* - * Low level configuration - */ - -/* - * Clock configuration - */ -#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* SYS_XTAL_IN = 33MHz */ -#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK 1 /* IPB = 133MHz */ - -/* - * Memory map - */ -#define CONFIG_SYS_MBAR 0xF0000000 -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_DEFAULT_MBAR 0x80000000 - -#define CONFIG_SYS_LOWBOOT 1 - -/* Use ON-Chip SRAM until RAM will be available */ -#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM -#ifdef CONFIG_POST -/* preserve space for the post_word at end of on-chip SRAM */ -#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_POST_SIZE -#else -#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE -#endif - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_BOARD_TYPES 1 /* we use board_type */ - -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_MONITOR_LEN (384 << 10) /* 384 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (256 << 10) /* 256 kB for malloc() */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* initial mem map for Linux */ - -/* - * Flash configuration - */ -#define CONFIG_SYS_FLASH_CFI 1 -#define CONFIG_FLASH_CFI_DRIVER 1 -#define CONFIG_SYS_FLASH_BASE 0xfc000000 -/* we need these despite using CFI */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max num of sectors on one chip */ -#define CONFIG_SYS_FLASH_SIZE 0x02000000 /* 32 MiB */ - -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -#define CONFIG_SYS_RAMBOOT 1 -#undef CONFIG_SYS_LOWBOOT -#endif - -/* - * Chip selects configuration - */ -/* Boot Chipselect */ -#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE -#define CONFIG_SYS_BOOTCS_CFG 0x00087D31 /* for pci_clk = 33 MHz */ -/* use board_early_init_r to enable flash write in CS_BOOT */ -#define CONFIG_BOARD_EARLY_INIT_R - -/* Flash memory addressing */ -#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE - -/* No burst, dead cycle = 1 for CS0 (Flash) */ -#define CONFIG_SYS_CS_BURST 0x00000000 -#define CONFIG_SYS_CS_DEADCYCLE 0x00000001 - -/* - * SDRAM configuration - * settings for k4s561632E-xx75, assuming XLB = 132 MHz - */ -#define SDRAM_MODE 0x00CD0000 /* CASL 3, burst length 8 */ -#define SDRAM_CONTROL 0x514F0000 -#define SDRAM_CONFIG1 0xE2333900 -#define SDRAM_CONFIG2 0x8EE70000 - -/* - * MTD configuration - */ -#define CONFIG_CMD_MTDPARTS 1 -#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ -#define CONFIG_FLASH_CFI_MTD -#define MTDIDS_DEFAULT "nor0=cm5200-0" -#define MTDPARTS_DEFAULT "mtdparts=cm5200-0:" \ - "384k(uboot),128k(env)," \ - "128k(redund_env),128k(dtb)," \ - "2m(kernel),27904k(rootfs)," \ - "-(config)" - -/* - * RTC configuration - */ -#define CONFIG_RTC_MPC5200 1 /* use internal MPC5200 RTC */ - -/* - * USB configuration - */ -#define CONFIG_USB_OHCI 1 -#define CONFIG_USB_CLOCK 0x0001BBBB -#define CONFIG_USB_CONFIG 0x00001000 -/* Partitions (for USB) */ - -/* - * Invoke our last_stage_init function - needed by fwupdate - */ -#define CONFIG_LAST_STAGE_INIT 1 - -/* - * Environment settings - */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SIZE 0x10000 -#define CONFIG_ENV_SECT_SIZE 0x20000 -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN) -/* Configuration of redundant environment */ -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) - -/* - * Pin multiplexing configuration - */ - -/* - * CS1/GPIO_WKUP_6: GPIO (default) - * ALTs: CAN1 on I2C1, CAN2 on TIMER0/1 - * IRDA/PSC6: UART - * Ether: Ethernet 100Mbit with MD - * PCI_DIS: PCI controller disabled - * USB: USB - * PSC3: SPI with UART3 - * PSC2: UART - * PSC1: UART - */ -#define CONFIG_SYS_GPS_PORT_CONFIG 0x10559C44 - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP 1 /* undef to save memory */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_ALT_MEMTEST 1 -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x03f00000 /* 1 .. 63 MiB in SDRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -/* - * Various low-level settings - */ -#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI -#define CONFIG_SYS_HID0_FINAL HID0_ICE - -#define CONFIG_SYS_XLB_PIPELINING 1 /* enable transaction pipeling */ - -/* - * Cache Configuration - */ -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#ifdef CONFIG_CMD_KGDB -#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -/* - * Flat Device Tree support - */ -#define OF_CPU "PowerPC,5200@0" -#define OF_SOC "soc5200@f0000000" -#define OF_TBCLK (bd->bi_busfreq / 4) -#define OF_STDOUT_PATH "/soc5200@f0000000/serial@2000" - -#endif /* __CONFIG_H */ diff --git a/include/configs/digsy_mtc.h b/include/configs/digsy_mtc.h deleted file mode 100644 index 6710507a8d..0000000000 --- a/include/configs/digsy_mtc.h +++ /dev/null @@ -1,410 +0,0 @@ -/* - * (C) Copyright 2003-2004 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * (C) Copyright 2005-2007 - * Modified for InterControl digsyMTC MPC5200 board by - * Frank Bodammer, GCD Hard- & Software GmbH, - * frank.bodammer@gcd-solutions.de - * - * (C) Copyright 2009 Semihalf - * Optimized for digsyMTC by: Grzegorz Bernacki gjb@semihalf.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - */ - -#define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */ -#define CONFIG_DIGSY_MTC 1 /* ... on InterControl digsyMTC board */ - -/* - * Valid values for CONFIG_SYS_TEXT_BASE are: - * 0xFFF00000 boot high (standard configuration) - * 0xFE000000 boot low - * 0x00100000 boot from RAM (for testing only) - */ -#ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xFFF00000 /* Standard: boot high */ -#endif - -#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 - -#define CONFIG_SYS_CACHELINE_SIZE 32 - -/* - * Serial console configuration - */ -#define CONFIG_PSC_CONSOLE 4 /* console is on PSC4 */ -#define CONFIG_SYS_BAUDRATE_TABLE \ - { 9600, 19200, 38400, 57600, 115200, 230400 } - -/* - * PCI Mapping: - * 0x40000000 - 0x4fffffff - PCI Memory - * 0x50000000 - 0x50ffffff - PCI IO Space - */ -#define CONFIG_PCI_SCAN_SHOW 1 -#define CONFIG_PCI_BOOTDELAY 250 - -#define CONFIG_PCI_MEM_BUS 0x40000000 -#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS -#define CONFIG_PCI_MEM_SIZE 0x10000000 - -#define CONFIG_PCI_IO_BUS 0x50000000 -#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS -#define CONFIG_PCI_IO_SIZE 0x01000000 - -#define CONFIG_BZIP2 - -/* - * Video - */ - -#ifdef CONFIG_VIDEO -#define CONFIG_VIDEO_MB862xx -#define CONFIG_VIDEO_MB862xx_ACCEL -#define CONFIG_VIDEO_CORALP -#define CONFIG_VIDEO_LOGO -#define CONFIG_VIDEO_BMP_LOGO -#define CONFIG_SPLASH_SCREEN -#define CONFIG_VIDEO_BMP_GZIP -#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (2 << 20) /* decompressed img */ - -/* Coral-PA clock frequency, geo and other both 133MHz */ -#define CONFIG_SYS_MB862xx_CCF 0x00050000 -/* Video SDRAM parameters */ -#define CONFIG_SYS_MB862xx_MMR 0x11d7fa72 -#endif - -/* - * Command line configuration. - */ -#define CONFIG_CMD_PCI -#define CONFIG_CMD_REGINFO -#define CONFIG_CMD_SAVES - -#if (CONFIG_SYS_TEXT_BASE == 0xFF000000) -#define CONFIG_SYS_LOWBOOT 1 -#endif - -/* - * Autobooting - */ - -#undef CONFIG_BOOTARGS - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "fw_image=digsyMPC.img\0" \ - "mtcb_start=mtc led diag orange; run mtcb_1\0" \ - "mtcb_clearled=for x in user1 user2 usbpwr usbbusy; " \ - "do mtc led $x; done\0" \ - "mtcb_1=if mtc key; then run mtcb_clearled mtcb_update; " \ - "else run mtcb_fw; fi\0" \ - "mtcb_fw=if bootm ff000000; then echo FIRMWARE OK!; " \ - "else echo BAD FIRMWARE CRC!; mtc led diag red; fi\0" \ - "mtcb_update=mtc led user1 orange;" \ - "while mtc key; do ; done; run mtcb_2;\0" \ - "mtcb_2=mtc led user1 green 2; usb reset; run mtcb_usb1;\0" \ - "mtcb_usb1=if fatload usb 0 400000 script.img; " \ - "then run mtcb_doscript; else run mtcb_usb2; fi\0" \ - "mtcb_usb2=if fatload usb 0 400000 $fw_image; " \ - "then run mtcb_dousb; else run mtcb_ide; fi\0" \ - "mtcb_doscript=run mtcb_usbleds; mtc led user2 orange 2; " \ - "run mtcb_wait_flickr mtcb_ds_1;\0" \ - "mtcb_ds_1=if imi 400000; then mtc led usbbusy; " \ - "source 400000; else run mtcb_error; fi\0" \ - "mtcb_dousb=run mtcb_usbleds mtcb_wait_flickr mtcb_du_1;\0" \ - "mtcb_du_1=if imi 400000; then run mtcb_du_2; " \ - "else run mtcb_error; fi\0" \ - "mtcb_du_2=run mtcb_clear mtcb_prog; mtc led usbbusy; " \ - "run mtcb_checkfw\0" \ - "mtcb_checkfw=if imi ff000000; then run mtcb_success; " \ - "else run mtcb_error; fi\0" \ - "mtcb_waitkey=mtc key; until test $? -eq 0; do mtc key; done\0" \ - "mtcb_wait_flickr=run mtcb_waitkey mtcb_uledflckr\0" \ - "mtcb_usbleds=mtc led usbpwr green; mtc led usbbusy orange 1;\0"\ - "mtcb_uledflckr=mtc led user1 orange 11\0" \ - "mtcb_error=mtc led user1 red\0" \ - "mtcb_clear=erase ff000000 ff0fffff\0" \ - "mtcb_prog=cp.b 400000 ff000000 ${filesize}\0" \ - "mtcb_success=mtc led user1 green\0" \ - "mtcb_ide=if fatload ide 0 400000 $fw_image;" \ - "then run mtcb_doide; else run mtcb_error; fi\0" \ - "mtcb_doide=mtc led user2 green 1;" \ - "run mtcb_wait_flickr mtcb_di_1;\0" \ - "mtcb_di_1=if imi 400000; then run mtcb_di_2;" \ - "else run mtcb_error; fi\0" \ - "mtcb_di_2=run mtcb_clear; run mtcb_prog mtcb_checkfw\0" \ - "ramdisk_num_sector=16\0" \ - "flash_base=ff000000\0" \ - "flashdisk_size=e00000\0" \ - "env_sector=fff60000\0" \ - "flashdisk_start=ff100000\0" \ - "load_cmd=tftp 400000 digsyMPC.img\0" \ - "clear_cmd=erase ff000000 ff0fffff\0" \ - "flash_cmd=cp.b 400000 ff000000 ${filesize}\0" \ - "update_cmd=run load_cmd; " \ - "iminfo 400000; " \ - "run clear_cmd flash_cmd; " \ - "iminfo ff000000\0" \ - "spi_driver=yes\0" \ - "spi_watchdog=no\0" \ - "ftps_start=yes\0" \ - "ftps_user1=admin\0" \ - "ftps_pass1=admin\0" \ - "ftps_base1=/\0" \ - "ftps_home1=/\0" \ - "plc_sio_srv=no\0" \ - "plc_sio_baud=57600\0" \ - "plc_sio_parity=no\0" \ - "plc_sio_stop=1\0" \ - "plc_sio_com=2\0" \ - "plc_eth_srv=yes\0" \ - "plc_eth_port=1200\0" \ - "plc_root=/ide/\0" \ - "diag_level=0\0" \ - "webvisu=no\0" \ - "plc_can1_routing=no\0" \ - "plc_can1_baudrate=250\0" \ - "plc_can2_routing=no\0" \ - "plc_can2_baudrate=250\0" \ - "plc_can3_routing=no\0" \ - "plc_can3_baudrate=250\0" \ - "plc_can4_routing=no\0" \ - "plc_can4_baudrate=250\0" \ - "netdev=eth0\0" \ - "console=ttyPSC0\0" \ - "kernel_addr_r=400000\0" \ - "fdt_addr_r=600000\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:" \ - "${netmask}:${hostname}:${netdev}:off panic=1\0" \ - "addcons=setenv bootargs ${bootargs} console=${console},${baudrate}\0"\ - "rootpath=/opt/eldk/ppc_6xx\0" \ - "net_nfs=tftp ${kernel_addr_r} ${bootfile};" \ - "tftp ${fdt_addr_r} ${fdt_file};" \ - "run nfsargs addip addcons;" \ - "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \ - "load=tftp 200000 ${u-boot}\0" \ - "update=protect off FFF00000 +${filesize};" \ - "erase FFF00000 +${filesize};" \ - "cp.b 200000 FFF00000 ${filesize};" \ - "protect on FFF00000 +${filesize}\0" \ - "" - -#define CONFIG_BOOTCOMMAND "run mtcb_start" - -/* - * Flash configuration - */ -#define CONFIG_SYS_FLASH_CFI 1 -#define CONFIG_FLASH_CFI_DRIVER 1 - -#if defined(CONFIG_DIGSY_REV5) -#define CONFIG_SYS_FLASH_BASE 0xFE000000 -#define CONFIG_SYS_FLASH_BASE_CS1 0xFC000000 -#define CONFIG_SYS_MAX_FLASH_BANKS 2 -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, \ - CONFIG_SYS_FLASH_BASE_CS1} -#define CONFIG_SYS_UPDATE_FLASH_SIZE -#define CONFIG_FDT_FIXUP_NOR_FLASH_SIZE -#else -#define CONFIG_SYS_FLASH_BASE 0xFF000000 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } -#endif - -#define CONFIG_SYS_MAX_FLASH_SECT 256 -#define CONFIG_FLASH_16BIT -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT -#define CONFIG_SYS_FLASH_SIZE 0x01000000 -#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 - -#define OF_CPU "PowerPC,5200@0" -#define OF_SOC "soc5200@f0000000" -#define OF_TBCLK (bd->bi_busfreq / 4) - -#define CONFIG_BOARD_EARLY_INIT_R -#define CONFIG_MISC_INIT_R - -/* - * Environment settings - */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#if defined(CONFIG_LOWBOOT) -#define CONFIG_ENV_ADDR 0xFF060000 -#else /* CONFIG_LOWBOOT */ -#define CONFIG_ENV_ADDR 0xFFF60000 -#endif /* CONFIG_LOWBOOT */ -#define CONFIG_ENV_SIZE 0x10000 -#define CONFIG_ENV_SECT_SIZE 0x20000 -#define CONFIG_ENV_OVERWRITE 1 - -/* - * Memory map - */ -#define CONFIG_SYS_MBAR 0xF0000000 -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#if !defined(CONFIG_SYS_LOWBOOT) -#define CONFIG_SYS_DEFAULT_MBAR 0x80000000 -#else -#define CONFIG_SYS_DEFAULT_MBAR 0xF0000000 -#endif - -/* - * Use SRAM until RAM will be available - */ -#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM -#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE - -#define CONFIG_SYS_GBL_DATA_OFFSET \ - (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -#define CONFIG_SYS_RAMBOOT 1 -#endif - -#define CONFIG_SYS_MONITOR_LEN (256 << 10) -#define CONFIG_SYS_MALLOC_LEN (4096 << 10) -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) - -/* - * Ethernet configuration - */ -#define CONFIG_MPC5xxx_FEC 1 -#define CONFIG_MPC5xxx_FEC_MII100 -#if defined(CONFIG_DIGSY_REV5) -#define CONFIG_PHY_ADDR 0x01 -#else -#define CONFIG_PHY_ADDR 0x00 -#endif -#define CONFIG_PHY_RESET_DELAY 1000 - -#define CONFIG_NETCONSOLE /* include NetConsole support */ - -/* - * GPIO configuration - * use pin gpio_wkup_6 as second SDRAM chip select (mem_cs1) - * Bit 0 (mask 0x80000000) : 0x1 - * SPI on Tmr2/3/4/5 pins - * Bit 2:3 (mask 0x30000000) : 0x2 - * ATA cs0/1 on csb_4/5 - * Bit 6:7 (mask 0x03000000) : 0x2 - * Ethernet 100Mbit with MD - * Bits 12:15 (mask 0x000f0000): 0x5 - * USB - Two UARTs - * Bits 18:19 (mask 0x00003000) : 0x2 - * PSC3 - USB2 on PSC3 - * Bits 20:23 (mask 0x00000f00) : 0x1 - * PSC2 - CAN1&2 on PSC2 pins - * Bits 25:27 (mask 0x00000070) : 0x1 - * PSC1 - AC97 functionality - * Bits 29:31 (mask 0x00000007) : 0x2 - */ -#define CONFIG_SYS_GPS_PORT_CONFIG 0xA2552112 - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP -#define CONFIG_AUTO_COMPLETE 1 -#define CONFIG_CMDLINE_EDITING 1 - -#define CONFIG_MX_CYCLIC 1 - -#define CONFIG_SYS_CBSIZE 1024 -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) -#define CONFIG_SYS_MAXARGS 32 -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -#define CONFIG_SYS_ALT_MEMTEST -#define CONFIG_SYS_MEMTEST_SCRATCH 0x00001000 -#define CONFIG_SYS_MEMTEST_START 0x00010000 -#define CONFIG_SYS_MEMTEST_END 0x019fffff - -#define CONFIG_SYS_LOAD_ADDR 0x00100000 - -/* - * Various low-level settings - */ -#define CONFIG_SYS_SDRAM_CS1 1 -#define CONFIG_SYS_XLB_PIPELINING 1 - -#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI -#define CONFIG_SYS_HID0_FINAL HID0_ICE - -#if defined(CONFIG_SYS_LOWBOOT) -#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE -#define CONFIG_SYS_BOOTCS_CFG 0x0002DD00 -#endif - -#define CONFIG_SYS_CS4_START 0x60000000 -#define CONFIG_SYS_CS4_SIZE 0x1000 -#define CONFIG_SYS_CS4_CFG 0x0008FC00 - -#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE -#define CONFIG_SYS_CS0_CFG 0x0002DD00 - -#if defined(CONFIG_DIGSY_REV5) -#define CONFIG_SYS_CS1_START CONFIG_SYS_FLASH_BASE_CS1 -#define CONFIG_SYS_CS1_SIZE CONFIG_SYS_FLASH_SIZE -#define CONFIG_SYS_CS1_CFG 0x0002DD00 -#endif - -#define CONFIG_SYS_CS_BURST 0x00000000 -#define CONFIG_SYS_CS_DEADCYCLE 0x11111111 - -#if !defined(CONFIG_SYS_LOWBOOT) -#define CONFIG_SYS_RESET_ADDRESS 0xfff00100 -#else -#define CONFIG_SYS_RESET_ADDRESS 0xff000100 -#endif - -/* - * USB - */ -#define CONFIG_USB_OHCI_NEW -#define CONFIG_SYS_OHCI_BE_CONTROLLER - -#define CONFIG_USB_CLOCK 0x00013333 -#define CONFIG_USB_CONFIG 0x00002000 - -#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15 -#define CONFIG_SYS_USB_OHCI_REGS_BASE MPC5XXX_USB -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "mpc5200" -#define CONFIG_SYS_USB_OHCI_CPU_INIT - -/* - * IDE/ATA - */ -#define CONFIG_IDE_RESET -#define CONFIG_IDE_PREINIT - -#define CONFIG_SYS_ATA_CS_ON_I2C2 -#define CONFIG_SYS_IDE_MAXBUS 1 -#define CONFIG_SYS_IDE_MAXDEVICE 1 - -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 -#define CONFIG_SYS_ATA_BASE_ADDR MPC5XXX_ATA -#define CONFIG_SYS_ATA_DATA_OFFSET (0x0060) -#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET) -#define CONFIG_SYS_ATA_ALT_OFFSET (0x005C) -#define CONFIG_SYS_ATA_STRIDE 4 - -#define CONFIG_ATAPI 1 -#define CONFIG_LBA48 1 - -#endif /* __CONFIG_H */ diff --git a/include/configs/inka4x0.h b/include/configs/inka4x0.h deleted file mode 100644 index d651eff4b2..0000000000 --- a/include/configs/inka4x0.h +++ /dev/null @@ -1,310 +0,0 @@ -/* - * (C) Copyright 2009 - * Detlev Zundel, DENX Software Engineering, dzu@denx.de. - * - * (C) Copyright 2003-2005 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */ -#define CONFIG_INKA4X0 1 /* INKA4x0 board */ - -/* - * Valid values for CONFIG_SYS_TEXT_BASE are: - * 0xFFE00000 boot low - * 0x00100000 boot from RAM (for testing only) - */ -#ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xFFE00000 /* Standard: boot low */ -#endif -#define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc5xxx/u-boot-customlayout.lds" - -#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ - -#define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */ - -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ - -/* - * Serial console configuration - */ -#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } - -/* - * PCI Mapping: - * 0x40000000 - 0x4fffffff - PCI Memory - * 0x50000000 - 0x50ffffff - PCI IO Space - */ -#define CONFIG_PCI_SCAN_SHOW 1 -#define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1 - -#define CONFIG_PCI_MEM_BUS 0x40000000 -#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS -#define CONFIG_PCI_MEM_SIZE 0x10000000 - -#define CONFIG_PCI_IO_BUS 0x50000000 -#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS -#define CONFIG_PCI_IO_SIZE 0x01000000 - -#define CONFIG_SYS_XLB_PIPELINING 1 - -/* Partitions */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -/* - * Command line configuration. - */ -#define CONFIG_CMD_PCI - -#define CONFIG_TIMESTAMP 1 /* Print image info with timestamp */ - -#if (CONFIG_SYS_TEXT_BASE == 0xFFE00000) /* Boot low */ -# define CONFIG_SYS_LOWBOOT 1 -#endif - -/* - * Autobooting - */ - -#define CONFIG_PREBOOT "echo;" \ - "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ - "echo" - -#undef CONFIG_BOOTARGS - -#define CONFIG_IPADDR 192.168.100.2 -#define CONFIG_SERVERIP 192.168.100.1 -#define CONFIG_NETMASK 255.255.255.0 -#define HOSTNAME inka4x0 -#define CONFIG_BOOTFILE "/tftpboot/inka4x0/uImage" -#define CONFIG_ROOTPATH "/opt/eldk/ppc_6xx" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "addcons=setenv bootargs ${bootargs} " \ - "console=ttyS0,${baudrate}\0" \ - "flash_nfs=run nfsargs addip addcons;" \ - "bootm ${kernel_addr}\0" \ - "net_nfs=tftp 200000 ${bootfile};" \ - "run nfsargs addip addcons;bootm\0" \ - "enable_disp=mw.l 100000 04000000 1;" \ - "cp.l 100000 f0000b20 1;" \ - "cp.l 100000 f0000b28 1\0" \ - "ideargs=setenv bootargs root=/dev/hda1 rw\0" \ - "ide_boot=ext2load ide 0:1 200000 uImage;" \ - "run ideargs addip addcons enable_disp;bootm\0" \ - "brightness=255\0" \ - "" - -#define CONFIG_BOOTCOMMAND "run ide_boot" - -/* - * IPB Bus clocking configuration. - */ -#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ - -/* - * Flash configuration - */ -#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */ -#define CONFIG_FLASH_CFI_DRIVER 1 -#define CONFIG_SYS_FLASH_BASE 0xffe00000 -#define CONFIG_SYS_FLASH_SIZE 0x00200000 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */ -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max num of sects on one chip */ -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */ - -/* - * Environment settings - */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x4000) -#define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_SECT_SIZE 0x2000 -#define CONFIG_ENV_OVERWRITE 1 -#define CONFIG_SYS_USE_PPCENV /* Environment embedded in sect .ppcenv */ - -/* - * Memory map - */ -#define CONFIG_SYS_MBAR 0xF0000000 -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_DEFAULT_MBAR 0x80000000 - -/* - * SDRAM controller configuration - */ -#undef CONFIG_SDR_MT48LC16M16A2 -#undef CONFIG_DDR_MT46V16M16 -#undef CONFIG_DDR_MT46V32M16 -#undef CONFIG_DDR_HYB25D512160BF -#define CONFIG_DDR_K4H511638C - -/* Use ON-Chip SRAM until RAM will be available */ -#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM - -/* preserve space for the post_word at end of on-chip SRAM */ -#define MPC5XXX_SRAM_POST_SIZE (MPC5XXX_SRAM_SIZE - 4) - -#ifdef CONFIG_POST -#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_POST_SIZE -#else -#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE -#endif - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -# define CONFIG_SYS_RAMBOOT 1 -#endif - -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/* - * Ethernet configuration - */ -#define CONFIG_MPC5xxx_FEC 1 -#define CONFIG_MPC5xxx_FEC_MII100 -/* - * Define CONFIG_MPC5xxx_FEC_MII10 to force FEC at 10Mb - */ -/* #define CONFIG_MPC5xxx_FEC_MII10 */ -#define CONFIG_PHY_ADDR 0x00 -#define CONFIG_MII - -/* - * GPIO configuration - * - * use CS1 as gpio_wkup_6 output - * Bit 0 (mask: 0x80000000): 0 - * use ALT CAN position: Bits 2-3 (mask: 0x30000000): - * 00 -> No Alternatives, I2C1 is used for onboard EEPROM - * 01 -> CAN1 on I2C1, CAN2 on Tmr0/1 do not use on TQM5200 with onboard - * EEPROM - * use PSC1 as UART: Bits 28-31 (mask: 0x00000007): 0100 - * use PSC2 as UART: Bits 24-27 (mask: 0x00000070): 0100 - * use PSC3 as UART: Bits 20-23 (mask: 0x00000700): 0100 - * use PSC6 as UART: Bits 9-11 (mask: 0x00700000): 0101 - */ -#define CONFIG_SYS_GPS_PORT_CONFIG 0x01501444 - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -/* Enable an alternate, more extensive memory test */ -#define CONFIG_SYS_ALT_MEMTEST - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -/* - * Various low-level settings - */ -#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI -#define CONFIG_SYS_HID0_FINAL HID0_ICE - -#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE -#define CONFIG_SYS_BOOTCS_CFG 0x00087800 /* for pci_clk = 66 MHz */ -#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE - -/* 32Mbit SRAM @0x30000000 */ -#define CONFIG_SYS_CS1_START 0x30000000 -#define CONFIG_SYS_CS1_SIZE 0x00400000 -#define CONFIG_SYS_CS1_CFG 0x31800 /* for pci_clk = 33 MHz */ - -/* 2 quad UART @0x80000000 (MBAR is relocated to 0xF0000000) */ -#define CONFIG_SYS_CS2_START 0x80000000 -#define CONFIG_SYS_CS2_SIZE 0x0001000 -#define CONFIG_SYS_CS2_CFG 0x21800 /* for pci_clk = 33 MHz */ - -/* GPIO in @0x30400000 */ -#define CONFIG_SYS_CS3_START 0x30400000 -#define CONFIG_SYS_CS3_SIZE 0x00100000 -#define CONFIG_SYS_CS3_CFG 0x31800 /* for pci_clk = 33 MHz */ - -#define CONFIG_SYS_CS_BURST 0x00000000 -#define CONFIG_SYS_CS_DEADCYCLE 0x33333333 - -/*----------------------------------------------------------------------- - * USB stuff - *----------------------------------------------------------------------- - */ -#define CONFIG_USB_OHCI -#define CONFIG_USB_CLOCK 0x00015555 -#define CONFIG_USB_CONFIG 0x00001000 - -/*----------------------------------------------------------------------- - * IDE/ATA stuff Supports IDE harddisk - *----------------------------------------------------------------------- - */ - -#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */ - -#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ -#undef CONFIG_IDE_LED /* LED for ide not supported */ - -#define CONFIG_IDE_PREINIT - -#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ -#define CONFIG_SYS_IDE_MAXDEVICE 2 /* max. 1 drive per IDE bus */ - -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 -#define CONFIG_SYS_ATA_BASE_ADDR MPC5XXX_ATA -#define CONFIG_SYS_ATA_DATA_OFFSET 0x0060 /* Offset for data I/O */ -#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET) /* Offset for normal register accesses */ -#define CONFIG_SYS_ATA_ALT_OFFSET 0x005C /* Offset for alternate registers */ -#define CONFIG_SYS_ATA_STRIDE 4 /* Interval between registers */ - -#define CONFIG_ATAPI 1 - -#define CONFIG_SYS_BRIGHTNESS 0xFF /* LCD Default Brightness (255 = off) */ - -#endif /* __CONFIG_H */ diff --git a/include/configs/ipek01.h b/include/configs/ipek01.h deleted file mode 100644 index c6390dbdbe..0000000000 --- a/include/configs/ipek01.h +++ /dev/null @@ -1,321 +0,0 @@ -/* - * (C) Copyright 2006 - * MicroSys GmbH - * - * (C) Copyright 2009 - * Wolfgang Grandegger, DENX Software Engineering, wg@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - */ - -#define CONFIG_MPC5200 -#define CONFIG_MPX5200 1 /* MPX5200 board */ -#define CONFIG_MPC5200_DDR 1 /* use DDR RAM */ -#define CONFIG_IPEK01 /* Motherboard is ipek01 */ - -#define CONFIG_SYS_TEXT_BASE 0xfc000000 - -#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33MHz */ - -#define CONFIG_MISC_INIT_R - -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#ifdef CONFIG_CMD_KGDB -#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -/* - * Serial console configuration - */ -#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } - -#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ - -/* - * Video configuration for LIME GDC - */ -#ifdef CONFIG_VIDEO -#define CONFIG_VIDEO_MB862xx -#define CONFIG_VIDEO_MB862xx_ACCEL -#define VIDEO_FB_16BPP_WORD_SWAP -#define CONFIG_VIDEO_LOGO -#define CONFIG_VIDEO_BMP_LOGO -#define CONFIG_SPLASH_SCREEN -#define CONFIG_VIDEO_BMP_GZIP -#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (2 << 20) /* decompressed img */ -/* Lime clock frequency */ -#define CONFIG_SYS_MB862xx_CCF 0x90000 /* geo 166MHz other 133MHz */ -/* SDRAM parameter */ -#define CONFIG_SYS_MB862xx_MMR 0x41c767e3 -#endif - -/* - * PCI Mapping: - * 0x40000000 - 0x4fffffff - PCI Memory - * 0x50000000 - 0x50ffffff - PCI IO Space - */ -#define CONFIG_PCI_SCAN_SHOW 1 - -#define CONFIG_PCI_MEM_BUS 0x40000000 -#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS -#define CONFIG_PCI_MEM_SIZE 0x10000000 - -#define CONFIG_PCI_IO_BUS 0x50000000 -#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS -#define CONFIG_PCI_IO_SIZE 0x01000000 - -#define CONFIG_MII 1 -#define CONFIG_EEPRO100 1 -#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ - -/* USB */ -#define CONFIG_USB_OHCI_NEW -#define CONFIG_SYS_OHCI_BE_CONTROLLER - -#define CONFIG_SYS_USB_OHCI_CPU_INIT -#define CONFIG_SYS_USB_OHCI_REGS_BASE MPC5XXX_USB -#define CONFIG_SYS_USB_OHCI_SLOT_NAME "mpc5200" -#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15 - -/* - * Command line configuration. - */ -#define CONFIG_CMD_PCI /* pciinfo */ - -#define CONFIG_SYS_LOWBOOT 1 - -/* - * Autobooting - */ - -#define CONFIG_PREBOOT "echo;" \ - "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ - "echo" - -#undef CONFIG_BOOTARGS - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "consoledev=ttyPSC0\0" \ - "hostname=ipek01\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "addtty=setenv bootargs ${bootargs} " \ - "console=${consoledev},${baudrate}\0" \ - "flash_nfs=run nfsargs addip addtty;" \ - "bootm ${kernel_addr} - ${fdtaddr}\0" \ - "flash_self=run ramargs addip addtty;" \ - "bootm ${kernel_addr} ${ramdisk_addr} ${fdtaddr}\0" \ - "net_nfs=tftp 200000 ${bootfile}; tftp ${fdtaddr} ${fdtfile};" \ - "run nfsargs addip addtty;" \ - "bootm ${loadaddr} - ${fdtaddr}\0" \ - "rootpath=/opt/eldk/ppc_6xx\0" \ - "bootfile=ipek01/uImage\0" \ - "load=tftp 100000 ipek01/u-boot.bin\0" \ - "update=protect off FC000000 +60000; era FC000000 +60000; " \ - "cp.b 100000 FC000000 ${filesize}\0" \ - "upd=run load;run update\0" \ - "fdtaddr=800000\0" \ - "loadaddr=400000\0" \ - "fdtfile=ipek01/ipek01.dtb\0" \ - "" - -#define CONFIG_BOOTCOMMAND "run flash_self" - -/* - * IPB Bus clocking configuration. - */ -#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* for 133MHz */ -/* PCI clock must be 33, because board will not boot */ -#undef CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2 /* for 66MHz */ - -/* - * Open firmware flat tree support - */ -#define OF_CPU "PowerPC,5200@0" -#define OF_SOC "soc5200@f0000000" -#define OF_TBCLK (bd->bi_busfreq / 4) - -#define CONFIG_SYS_FLASH_BASE 0xFC000000 -#define CONFIG_SYS_FLASH_SIZE 0x01000000 -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + \ - CONFIG_SYS_MONITOR_LEN) - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max num of sects on one chip */ -#define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ - -/* use CFI flash driver */ -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_SYS_FLASH_EMPTY_INFO -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 - -/* - * Environment settings - */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SIZE 0x10000 -#define CONFIG_ENV_SECT_SIZE 0x20000 -#define CONFIG_ENV_OVERWRITE 1 -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE - -/* - * Memory map - */ -#define CONFIG_SYS_MBAR 0xf0000000 -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_DEFAULT_MBAR 0x80000000 -#define CONFIG_SYS_SRAM_BASE 0xF1000000 -#define CONFIG_SYS_SRAM_SIZE 0x00200000 -#define CONFIG_SYS_LIME_BASE 0xE4000000 -#define CONFIG_SYS_LIME_SIZE 0x04000000 -#define CONFIG_SYS_FPGA_BASE 0xC0000000 -#define CONFIG_SYS_FPGA_SIZE 0x10000000 -#define CONFIG_SYS_MPEG_BASE 0xe2000000 -#define CONFIG_SYS_MPEG_SIZE 0x01000000 -#define CONFIG_SYS_CF_BASE 0xe1000000 -#define CONFIG_SYS_CF_SIZE 0x01000000 - -/* Use SRAM until RAM will be available */ -#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM -/* End of used area in DPRAM */ -#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -# define CONFIG_SYS_RAMBOOT 1 -#endif - -#define CONFIG_SYS_MONITOR_LEN (384 << 10) /* Reserve 384 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (4 << 20) /* Reserve 128 kB for malloc() */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/* - * Ethernet configuration - */ -#define CONFIG_MPC5xxx_FEC 1 -#define CONFIG_MPC5xxx_FEC_MII100 -#define CONFIG_PHY_ADDR 0x00 - -/* - * GPIO configuration - */ -#define CONFIG_SYS_GPS_PORT_CONFIG 0x1d556624 - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#ifdef CONFIG_CMD_KGDB -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -/* max number of command args */ -#define CONFIG_SYS_MAXARGS 16 -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1...15 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -/* - * Various low-level settings - */ -#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI -#define CONFIG_SYS_HID0_FINAL HID0_ICE - -#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE -#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE -#define CONFIG_SYS_CS1_START CONFIG_SYS_SRAM_BASE -#define CONFIG_SYS_CS1_SIZE CONFIG_SYS_SRAM_SIZE -#define CONFIG_SYS_CS3_START CONFIG_SYS_LIME_BASE -#define CONFIG_SYS_CS3_SIZE CONFIG_SYS_LIME_SIZE -#define CONFIG_SYS_CS6_START CONFIG_SYS_FPGA_BASE -#define CONFIG_SYS_CS6_SIZE CONFIG_SYS_FPGA_SIZE -#define CONFIG_SYS_CS5_START CONFIG_SYS_CF_BASE -#define CONFIG_SYS_CS5_SIZE CONFIG_SYS_CF_SIZE -#define CONFIG_SYS_CS7_START CONFIG_SYS_MPEG_BASE -#define CONFIG_SYS_CS7_SIZE CONFIG_SYS_MPEG_SIZE - -#ifdef CONFIG_SYS_PCISPEED_66 -#define CONFIG_SYS_BOOTCS_CFG 0x0006F900 -#define CONFIG_SYS_CS1_CFG 0x0004FB00 -#define CONFIG_SYS_CS2_CFG 0x0006F900 -#else -#define CONFIG_SYS_BOOTCS_CFG 0x0002F900 -#define CONFIG_SYS_CS1_CFG 0x0001FB00 -#define CONFIG_SYS_CS2_CFG 0x0002F90C -#endif - -/* - * Ack active, Muxed mode, AS=24 bit address, DS=32 bit data, 0 - * waitstates, writeswap and readswap enabled - */ -#define CONFIG_SYS_CS3_CFG 0x00FFFB0C -#define CONFIG_SYS_CS6_CFG 0x00FFFB0C -#define CONFIG_SYS_CS7_CFG 0x4040751C - -#define CONFIG_SYS_CS_BURST 0x00000000 -#define CONFIG_SYS_CS_DEADCYCLE 0x33330000 - -#define CONFIG_SYS_RESET_ADDRESS 0xff000000 - -/*----------------------------------------------------------------------- - * USB stuff - *----------------------------------------------------------------------- - */ -#define CONFIG_USB_CLOCK 0x0001BBBB -#define CONFIG_USB_CONFIG 0x00005000 - -/*----------------------------------------------------------------------- - * IDE/ATA stuff Supports IDE harddisk - *----------------------------------------------------------------------- - */ -#define CONFIG_IDE_PREINIT - -#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ -#define CONFIG_SYS_IDE_MAXDEVICE 2 /* max. 2 drives per IDE bus */ - -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 - -#define CONFIG_SYS_ATA_BASE_ADDR MPC5XXX_ATA - -/* Offset for data I/O */ -#define CONFIG_SYS_ATA_DATA_OFFSET (0x0060) - -/* Offset for normal register accesses */ -#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET) - -/* Offset for alternate registers */ -#define CONFIG_SYS_ATA_ALT_OFFSET (0x005C) - -/* Interval between registers */ -#define CONFIG_SYS_ATA_STRIDE 4 - -#endif /* __CONFIG_H */ diff --git a/include/configs/jupiter.h b/include/configs/jupiter.h deleted file mode 100644 index 4461623118..0000000000 --- a/include/configs/jupiter.h +++ /dev/null @@ -1,246 +0,0 @@ -/* - * (C) Copyright 2007 - * Heiko Schocher, DENX Software Engineering, hs@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ - -#define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */ -#define CONFIG_JUPITER 1 /* ... on Jupiter board */ - -/* - * Valid values for CONFIG_SYS_TEXT_BASE are: - * 0xFFF00000 boot high (standard configuration) - * 0x00100000 boot from RAM (for testing only) - */ -#ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xFFF00000 -#endif - -#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ - -#define CONFIG_BOARD_EARLY_INIT_R 1 - -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ - -/* - * Serial console configuration - */ -#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } - -/* - * PCI Mapping: - * 0x40000000 - 0x4fffffff - PCI Memory - * 0x50000000 - 0x50ffffff - PCI IO Space - */ - -#if defined(CONFIG_PCI) -#define CONFIG_PCI_SCAN_SHOW 1 -#define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1 - -#define CONFIG_PCI_MEM_BUS 0x40000000 -#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS -#define CONFIG_PCI_MEM_SIZE 0x10000000 - -#define CONFIG_PCI_IO_BUS 0x50000000 -#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS -#define CONFIG_PCI_IO_SIZE 0x01000000 -#endif - -#define CONFIG_SYS_XLB_PIPELINING 1 - -#define CONFIG_MII 1 -#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ - -/* Partitions */ - -#define CONFIG_TIMESTAMP /* Print image info with timestamp */ - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -/* - * Command line configuration. - */ - -#if defined(CONFIG_PCI) -#define CODFIG_CMD_PCI -#endif - -/* - * Autobooting - */ - -#define CONFIG_PREBOOT "echo;" \ - "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ - "echo" - -#undef CONFIG_BOOTARGS - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "flash_nfs=run nfsargs addip addcons;" \ - "bootm ${kernel_addr}\0" \ - "flash_self=run ramargs addip;" \ - "bootm ${kernel_addr} ${ramdisk_addr}\0" \ - "addcons=setenv bootargs ${bootargs} console=${contyp}," \ - "${baudrate}\0" \ - "contyp=ttyS0\0" \ - "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addcons;" \ - "bootm\0" \ - "rootpath=/opt/eldk/ppc_6xx\0" \ - "bootfile=/tftpboot/jupiter/uImage\0" \ - "" - -#define CONFIG_BOOTCOMMAND "run flash_self" - -/* - * IPB Bus clocking configuration. - */ -#undef CONFIG_SYS_IPBSPEED_133 /* define for 133MHz speed */ - -#if 0 -/* pass open firmware flat tree */ -#define OF_CPU "PowerPC,5200@0" -#define OF_SOC "soc5200@f0000000" -#define OF_TBCLK (bd->bi_busfreq / 8) -#define OF_STDOUT_PATH "/soc5200@f0000000/serial@2000" -#endif - -/* - * Flash configuration - */ -#define CONFIG_SYS_FLASH_BASE 0xFF000000 -#define CONFIG_SYS_FLASH_SIZE 0x01000000 - -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max num of sects on one chip */ - -#define CONFIG_ENV_ADDR (CONFIG_SYS_TEXT_BASE + 0x40000) /* third sector */ - -#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */ - -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_SYS_FLASH_EMPTY_INFO -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_8BIT -#define CONFIG_SYS_UPDATE_FLASH_SIZE 1 -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 - -/* - * Environment settings - */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SIZE 0x20000 -#define CONFIG_ENV_SECT_SIZE 0x20000 -#define CONFIG_ENV_OVERWRITE 1 - -/* Address and size of Redundant Environment Sector */ -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) - -/* - * Memory map - */ -#define CONFIG_SYS_MBAR 0xF0000000 -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_DEFAULT_MBAR 0x80000000 - -/* Use SRAM until RAM will be available */ -#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM -#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE /* Size of used area in DPRAM */ - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -# define CONFIG_SYS_RAMBOOT 1 -#endif - -#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/* - * Ethernet configuration - */ -#define CONFIG_MPC5xxx_FEC 1 -#define CONFIG_MPC5xxx_FEC_MII100 -/* - * Define CONFIG_MPC5xxx_FEC_MII10 to force FEC at 10Mb - */ -/* #define CONFIG_MPC5xxx_FEC_MII10 */ -#define CONFIG_PHY_ADDR 0x00 - -/* - * GPIO configuration - */ -#define CONFIG_SYS_GPS_PORT_CONFIG 0x10000004 - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ - -#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ -#define CONFIG_SYS_ALT_MEMTEST 1 - -#define CONFIG_SYS_LOAD_ADDR 0x200000 /* default load address */ - -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -/* - * Various low-level settings - */ -#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI -#define CONFIG_SYS_HID0_FINAL HID0_ICE - -#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE -#define CONFIG_SYS_BOOTCS_CFG 0x00047801 -#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE - -#define CONFIG_SYS_CS_BURST 0x00000000 -#define CONFIG_SYS_CS_DEADCYCLE 0x33333333 - -#define CONFIG_SYS_RESET_ADDRESS 0xff000000 - -#endif /* __CONFIG_H */ diff --git a/include/configs/manroland/mpc5200-common.h b/include/configs/manroland/mpc5200-common.h deleted file mode 100644 index 68874dc029..0000000000 --- a/include/configs/manroland/mpc5200-common.h +++ /dev/null @@ -1,176 +0,0 @@ -/* - * (C) Copyright 2009 - * Heiko Schocher, DENX Software Engineering, hs@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __MANROLAND_MPC52XX__COMMON_H -#define __MANROLAND_MPC52XX__COMMON_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_MPC5200 1 /* MPC5200 CPU */ - -/* ... running at 33.000000MHz */ -#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 - -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ - -/* - * Serial console configuration - */ -#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200,\ - 230400 } - -#if (CONFIG_SYS_TEXT_BASE == 0xFFF00000) /* Boot low */ -# define CONFIG_SYS_LOWBOOT 1 -#endif - -/* - * IPB Bus clocking configuration. - */ -#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ - -/* - * Flash configuration - */ -#define CONFIG_SYS_FLASH_BASE 0xFF800000 - -#define CONFIG_SYS_FLASH_SIZE 0x00800000 /* 8 MByte */ - -#define CONFIG_ENV_ADDR (CONFIG_SYS_TEXT_BASE+0x40000) /* second sector */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks - (= chip selects) */ -#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout [ms]*/ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout [ms]*/ - -#define CONFIG_FLASH_CFI_DRIVER -#define CONFIG_SYS_FLASH_CFI -#define CONFIG_SYS_FLASH_EMPTY_INFO -#define CONFIG_SYS_FLASH_CFI_AMD_RESET - -/* - * Environment settings - */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SIZE 0x4000 -#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET+CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) - -/* - * Memory map - */ -#define CONFIG_SYS_MBAR 0xF0000000 -#define CONFIG_SYS_DEFAULT_MBAR 0x80000000 - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE -\ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_SRAM_BASE 0x80100000 /* CS 1 */ -#define CONFIG_SYS_DISPLAY_BASE 0x80600000 /* CS 3 */ - -/* Settings for XLB = 132 MHz */ -#define SDRAM_DDR 1 -#define SDRAM_MODE 0x018D0000 -#define SDRAM_EMODE 0x40090000 -#define SDRAM_CONTROL 0x714f0f00 -#define SDRAM_CONFIG1 0x73722930 -#define SDRAM_CONFIG2 0x47770000 -#define SDRAM_TAPDELAY 0x10000000 - -/* Use ON-Chip SRAM until RAM will be available */ -#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM -#ifdef CONFIG_POST -/* preserve space for the post_word at end of on-chip SRAM */ -#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_POST_SIZE -#else -#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE -#endif - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -# define CONFIG_SYS_RAMBOOT 1 -#endif - -#define CONFIG_SYS_MONITOR_LEN (192 << 10) -#define CONFIG_SYS_MALLOC_LEN (512 << 10) -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) - -/* - * Ethernet configuration - */ -#define CONFIG_MPC5xxx_FEC 1 -#define CONFIG_MPC5xxx_FEC_MII100 -#define CONFIG_PHY_ADDR 0x00 -#define CONFIG_MII 1 - -/*use Hardware WDT */ -#define CONFIG_HW_WATCHDOG - -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -/* - * Various low-level settings - */ -#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI -#define CONFIG_SYS_HID0_FINAL HID0_ICE - -#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE -#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE - -/* 8Mbit SRAM @0x80100000 */ -#define CONFIG_SYS_CS1_START CONFIG_SYS_SRAM_BASE - -#define CONFIG_SYS_CS_BURST 0x00000000 -#define CONFIG_SYS_CS_DEADCYCLE 0x33333333 - -/*----------------------------------------------------------------------- - * IDE/ATA stuff Supports IDE harddisk - *----------------------------------------------------------------------- - */ - -#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */ - -#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ -#undef CONFIG_IDE_LED /* LED for ide not supported */ - -#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ - -#define CONFIG_IDE_PREINIT 1 - -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 - -#define CONFIG_SYS_ATA_BASE_ADDR MPC5XXX_ATA - -/* Offset for data I/O */ -#define CONFIG_SYS_ATA_DATA_OFFSET (0x0060) - -/* Offset for normal register accesses */ -#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET) - -/* Offset for alternate registers */ -#define CONFIG_SYS_ATA_ALT_OFFSET (0x005C) - -/* Interval between registers */ -#define CONFIG_SYS_ATA_STRIDE 4 - -#define CONFIG_ATAPI 1 - -#define OF_CPU "PowerPC,5200@0" -#define OF_SOC "soc5200@f0000000" -#define OF_TBCLK (bd->bi_busfreq / 4) -#define OF_STDOUT_PATH "/soc5200@f0000000/serial@2000" -#define CONFIG_OF_IDE_FIXUP - -#endif /* __MANROLAND_MPC52XX__COMMON_H */ diff --git a/include/configs/mecp5123.h b/include/configs/mecp5123.h deleted file mode 100644 index 17a97dfc3a..0000000000 --- a/include/configs/mecp5123.h +++ /dev/null @@ -1,398 +0,0 @@ -/* - * (C) Copyright 2009 Wolfgang Denk wd@denx.de - * (C) Copyright 2009, DAVE Srl <www.dave.eu> - * - * SPDX-License-Identifier: GPL-2.0+ - * modifications for the MECP5123 by reinhard.arlt@esd-electronics.com - * - */ - -/* - * MECP5123 board configuration file - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_MECP5123 1 - -/* - * Memory map for the MECP5123 board: - * - * 0x0000_0000 - 0x1FFF_FFFF DDR RAM (512 MB) - * 0x3000_0000 - 0x3001_FFFF SRAM (128 KB) - * 0x8000_0000 - 0x803F_FFFF IMMR (4 MB) - * 0x8200_0000 - 0x8200_FFFF VPC-3 (64 KB) - * 0xFFC0_0000 - 0xFFFF_FFFF NOR Boot FLASH (64 MB) - */ - -/* - * High Level Configuration Options - */ -#define CONFIG_E300 1 /* E300 Family */ - -#define CONFIG_SYS_TEXT_BASE 0xFFF00000 - -#define CONFIG_SYS_MPC512X_CLKIN 33333333 /* in Hz */ - -#define CONFIG_MISC_INIT_R - -#define CONFIG_SYS_IMMR 0x80000000 -#define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_IMMR+0x2100) - -#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest region */ -#define CONFIG_SYS_MEMTEST_END 0x00400000 - -/* - * DDR Setup - manually set all parameters as there's no SPD etc. - */ -#define CONFIG_SYS_DDR_SIZE 512 /* MB */ - -#define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is sys memory*/ -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE -#define CONFIG_SYS_MAX_RAM_SIZE 0x20000000 - -#define CONFIG_SYS_IOCTRL_MUX_DDR 0x00000036 - -/* DDR Controller Configuration - * - * SYS_CFG: - * [31:31] MDDRC Soft Reset: Diabled - * [30:30] DRAM CKE pin: Enabled - * [29:29] DRAM CLK: Enabled - * [28:28] Command Mode: Enabled (For initialization only) - * [27:25] DRAM Row Select: dram_row[15:0] = magenta_address[25:10] - * [24:21] DRAM Bank Select: dram_bank[1:0] = magenta_address[11:10] - * [20:19] Read Test: DON'T USE - * [18:18] Self Refresh: Enabled - * [17:17] 16bit Mode: Disabled - * [16:13] Ready Delay: 2 - * [12:12] Half DQS Delay: Disabled - * [11:11] Quarter DQS Delay: Disabled - * [10:08] Write Delay: 2 - * [07:07] Early ODT: Disabled - * [06:06] On DIE Termination: Disabled - * [05:05] FIFO Overflow Clear: DON'T USE here - * [04:04] FIFO Underflow Clear: DON'T USE here - * [03:03] FIFO Overflow Pending: DON'T USE here - * [02:02] FIFO Underlfow Pending: DON'T USE here - * [01:01] FIFO Overlfow Enabled: Enabled - * [00:00] FIFO Underflow Enabled: Enabled - * TIME_CFG0 - * [31:16] DRAM Refresh Time: 0 CSB clocks - * [15:8] DRAM Command Time: 0 CSB clocks - * [07:00] DRAM Precharge Time: 0 CSB clocks - * TIME_CFG1 - * [31:26] DRAM tRFC: - * [25:21] DRAM tWR1: - * [20:17] DRAM tWRT1: - * [16:11] DRAM tDRR: - * [10:05] DRAM tRC: - * [04:00] DRAM tRAS: - * TIME_CFG2 - * [31:28] DRAM tRCD: - * [27:23] DRAM tFAW: - * [22:19] DRAM tRTW1: - * [18:15] DRAM tCCD: - * [14:10] DRAM tRTP: - * [09:05] DRAM tRP: - * [04:00] DRAM tRPA - */ -#define CONFIG_SYS_MDDRC_SYS_CFG 0xEA804A00 -#define CONFIG_SYS_MDDRC_TIME_CFG0 0x06183D2E -#define CONFIG_SYS_MDDRC_TIME_CFG1 0x68EC1168 -#define CONFIG_SYS_MDDRC_TIME_CFG2 0x34310864 - -#define CONFIG_SYS_DDRCMD_NOP 0x01380000 -#define CONFIG_SYS_DDRCMD_PCHG_ALL 0x01100400 -#define CONFIG_SYS_DDRCMD_EM2 0x01020000 -#define CONFIG_SYS_DDRCMD_EM3 0x01030000 -#define CONFIG_SYS_DDRCMD_EN_DLL 0x01010000 -#define CONFIG_SYS_DDRCMD_RFSH 0x01080000 -#define CONFIG_SYS_MICRON_INIT_DEV_OP 0x01000432 -#define CONFIG_SYS_DDRCMD_OCD_DEFAULT 0x01010780 - -/* DDR Priority Manager Configuration */ -#define CONFIG_SYS_MDDRCGRP_PM_CFG1 0x00077777 -#define CONFIG_SYS_MDDRCGRP_PM_CFG2 0x00000000 -#define CONFIG_SYS_MDDRCGRP_HIPRIO_CFG 0x00000001 -#define CONFIG_SYS_MDDRCGRP_LUT0_MU 0xFFEEDDCC -#define CONFIG_SYS_MDDRCGRP_LUT0_ML 0xBBAAAAAA -#define CONFIG_SYS_MDDRCGRP_LUT1_MU 0x66666666 -#define CONFIG_SYS_MDDRCGRP_LUT1_ML 0x55555555 -#define CONFIG_SYS_MDDRCGRP_LUT2_MU 0x44444444 -#define CONFIG_SYS_MDDRCGRP_LUT2_ML 0x44444444 -#define CONFIG_SYS_MDDRCGRP_LUT3_MU 0x55555555 -#define CONFIG_SYS_MDDRCGRP_LUT3_ML 0x55555558 -#define CONFIG_SYS_MDDRCGRP_LUT4_MU 0x11111111 -#define CONFIG_SYS_MDDRCGRP_LUT4_ML 0x11111122 -#define CONFIG_SYS_MDDRCGRP_LUT0_AU 0xaaaaaaaa -#define CONFIG_SYS_MDDRCGRP_LUT0_AL 0xaaaaaaaa -#define CONFIG_SYS_MDDRCGRP_LUT1_AU 0x66666666 -#define CONFIG_SYS_MDDRCGRP_LUT1_AL 0x66666666 -#define CONFIG_SYS_MDDRCGRP_LUT2_AU 0x11111111 -#define CONFIG_SYS_MDDRCGRP_LUT2_AL 0x11111111 -#define CONFIG_SYS_MDDRCGRP_LUT3_AU 0x11111111 -#define CONFIG_SYS_MDDRCGRP_LUT3_AL 0x11111111 -#define CONFIG_SYS_MDDRCGRP_LUT4_AU 0x11111111 -#define CONFIG_SYS_MDDRCGRP_LUT4_AL 0x11111111 - -/* - * NOR FLASH on the Local Bus - */ -#define CONFIG_SYS_FLASH_CFI /* use the Common Flash Interface */ -#define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */ - -#define CONFIG_SYS_FLASH_BASE 0xFFC00000 /* start of FLASH */ -#define CONFIG_SYS_FLASH_SIZE 0x00400000 /* max flash size */ - -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ -#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE} -#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max sectors per device */ - -#undef CONFIG_SYS_FLASH_CHECKSUM - -/* - * NAND FLASH - * drivers/mtd/nand/mpc5121_nfc.c (rev 2 silicon only) - */ -#define CONFIG_CMD_NAND -#define CONFIG_NAND_MPC5121_NFC -#define CONFIG_SYS_NAND_BASE 0x40000000 -#define CONFIG_SYS_MAX_NAND_DEVICE 1 - -/* - * Configuration parameters for MPC5121 NAND driver - */ -#define CONFIG_FSL_NFC_WIDTH 1 -#define CONFIG_FSL_NFC_WRITE_SIZE 2048 -#define CONFIG_FSL_NFC_SPARE_SIZE 64 -#define CONFIG_FSL_NFC_CHIPS 1 - -#define CONFIG_SYS_SRAM_BASE 0x30000000 -#define CONFIG_SYS_SRAM_SIZE 0x00020000 /* 128 KB */ - -/* Initialize Local Window for NOR FLASH access */ -#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE - -/* ALE active low, data size 4bytes */ -#define CONFIG_SYS_CS0_CFG 0x05051150 - -/* Use not alternative CS timing */ -#define CONFIG_SYS_CS_ALETIMING 0x00000000 - -/* ALE active low, data size 4bytes */ -#define CONFIG_SYS_CS1_CFG 0x1f1f3090 -#define CONFIG_SYS_VPC3_BASE 0x82000000 /* start of VPC3 space */ -#define CONFIG_SYS_VPC3_SIZE 0x00010000 /* max VPC3 size */ -/* Initialize Local Window for VPC3 access */ -#define CONFIG_SYS_CS1_START CONFIG_SYS_VPC3_BASE -#define CONFIG_SYS_CS1_SIZE CONFIG_SYS_VPC3_SIZE - -/* Use SRAM for initial stack */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_SRAM_BASE /* Init RAM addr */ -#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_SRAM_SIZE - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* Start of monitor */ -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Monitor length */ -#define CONFIG_SYS_MALLOC_LEN (6 * 1024 * 1024) /* Malloc size */ - -/* - * Serial Port - */ -#define CONFIG_CONS_INDEX 1 - -/* - * Serial console configuration - */ -#define CONFIG_PSC_CONSOLE 3 /* console is on PSC3 */ -#define CONFIG_SYS_PSC3 -#if CONFIG_PSC_CONSOLE != 3 -#error CONFIG_PSC_CONSOLE must be 3 -#endif -#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} - -#define CONSOLE_FIFO_TX_SIZE FIFOC_PSC3_TX_SIZE -#define CONSOLE_FIFO_TX_ADDR FIFOC_PSC3_TX_ADDR -#define CONSOLE_FIFO_RX_SIZE FIFOC_PSC3_RX_SIZE -#define CONSOLE_FIFO_RX_ADDR FIFOC_PSC3_RX_ADDR - -/* - * Clocks in use - */ -#define SCCR1_CLOCKS_EN (CLOCK_SCCR1_CFG_EN | \ - CLOCK_SCCR1_LPC_EN | \ - CLOCK_SCCR1_PSC_EN(CONFIG_PSC_CONSOLE) | \ - CLOCK_SCCR1_PSCFIFO_EN | \ - CLOCK_SCCR1_DDR_EN | \ - CLOCK_SCCR1_FEC_EN | \ - CLOCK_SCCR1_NFC_EN | \ - CLOCK_SCCR1_PCI_EN | \ - CLOCK_SCCR1_TPR_EN) - -#define SCCR2_CLOCKS_EN (CLOCK_SCCR2_MEM_EN | \ - CLOCK_SCCR2_I2C_EN) - -#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ - -/* - * IIM - IC Identification Module - */ -#undef CONFIG_FSL_IIM - -/* - * Ethernet configuration - */ -#define CONFIG_MPC512x_FEC 1 -#define CONFIG_PHY_ADDR 0x1 -#define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_FEC_AN_TIMEOUT 1 -#define CONFIG_HAS_ETH0 - -/* - * Configure on-board RTC - */ -#define CONFIG_SYS_RTC_BUS_NUM 0x01 -#define CONFIG_SYS_I2C_RTC_ADDR 0x32 -#define CONFIG_RTC_RX8025 - -/* - * Environment - */ -#define CONFIG_ENV_IS_NOWHERE /* Store env in I2C EEPROM */ -#define CONFIG_ENV_SIZE 0x1000 -#define CONFIG_ENV_OFFSET 0x0000 /* environment starts here */ - -#define CONFIG_LOADS_ECHO /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ - -#define CONFIG_CMD_REGINFO - -/* - * Watchdog timeout = CONFIG_SYS_WATCHDOG_VALUE * 65536 / IPS clock. - * For example, when IPS is set to 66MHz and CONFIG_SYS_WATCHDOG_VALUE is set - * to 0xFFFF, watchdog timeouts after about 64s. For details refer - * to chapter 36 of the MPC5121e Reference Manual. - */ -/* #define CONFIG_WATCHDOG */ /* enable watchdog */ -#define CONFIG_SYS_WATCHDOG_VALUE 0xFFFF - - /* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ - -#ifdef CONFIG_CMD_KGDB -# define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -# define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif - -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -/* max number of command args */ -#define CONFIG_SYS_MAXARGS 32 -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -/* - * For booting Linux, the board info and command line data - * have to be in the first 256 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* Linux initial memory map */ - -/* Cache Configuration */ -#define CONFIG_SYS_DCACHE_SIZE 32768 -#define CONFIG_SYS_CACHELINE_SIZE 32 -#ifdef CONFIG_CMD_KGDB -#define CONFIG_SYS_CACHELINE_SHIFT 5 -#endif - -#define CONFIG_SYS_HID0_INIT 0x000000000 -#define CONFIG_SYS_HID0_FINAL HID0_ENABLE_MACHINE_CHECK -#define CONFIG_SYS_HID2 HID2_HBE - -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ - -#ifdef CONFIG_CMD_KGDB -#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ -#endif - -/* - * Environment Configuration - */ -#define CONFIG_TIMESTAMP - -#define CONFIG_HOSTNAME mecp512x -#define CONFIG_BOOTFILE "/tftpboot/mecp512x/uImage" -#define CONFIG_ROOTPATH "/tftpboot/mecp512x/target_root" - -#define CONFIG_LOADADDR 400000 /* def. location for tftp and bootm */ - -#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/ - -#define CONFIG_PREBOOT "echo;" \ - "echo Welcome to MECP5123" \ - "echo" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "u-boot_addr_r=200000\0" \ - "kernel_addr_r=600000\0" \ - "fdt_addr_r=880000\0" \ - "ramdisk_addr_r=900000\0" \ - "u-boot_addr=FFF00000\0" \ - "kernel_addr=FFC40000\0" \ - "fdt_addr=FFEC0000\0" \ - "ramdisk_addr=FC040000\0" \ - "ramdiskfile=/tftpboot/mecp512x/uRamdisk\0" \ - "u-boot=/tftpboot/mecp512x/u-boot.bin\0" \ - "bootfile=/tftpboot/mecp512x/uImage\0" \ - "fdtfile=/tftpboot/mecp512x/mecp512x.dtb\0" \ - "rootpath=/tftpboot/mecp512x/target_root\n" \ - "netdev=eth0\0" \ - "consdev=ttyPSC0\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "addtty=setenv bootargs ${bootargs} " \ - "console=${consdev},${baudrate}\0" \ - "flash_nfs=run nfsargs addip addtty;" \ - "bootm ${kernel_addr} - ${fdt_addr}\0" \ - "flash_self=run ramargs addip addtty;" \ - "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ - "net_nfs=tftp ${kernel_addr_r} ${bootfile};" \ - "tftp ${fdt_addr_r} ${fdtfile};" \ - "run nfsargs addip addtty;" \ - "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \ - "net_self=tftp ${kernel_addr_r} ${bootfile};" \ - "tftp ${ramdisk_addr_r} ${ramdiskfile};" \ - "tftp ${fdt_addr_r} ${fdtfile};" \ - "run ramargs addip addtty;" \ - "bootm ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}\0"\ - "load=tftp ${u-boot_addr_r} ${u-boot}\0" \ - "update=protect off ${u-boot_addr} +${filesize};" \ - "era ${u-boot_addr} +${filesize};" \ - "cp.b ${u-boot_addr_r} ${u-boot_addr} ${filesize}\0" \ - "upd=run load update\0" \ - "" - -#define CONFIG_BOOTCOMMAND "run flash_self" - -#define OF_CPU "PowerPC,5121@0" -#define OF_SOC_COMPAT "fsl,mpc5121-immr" -#define OF_TBCLK (bd->bi_busfreq / 4) -#define OF_STDOUT_PATH "/soc@80000000/serial@11300" - -#endif /* __CONFIG_H */ diff --git a/include/configs/motionpro.h b/include/configs/motionpro.h deleted file mode 100644 index 75633f66ef..0000000000 --- a/include/configs/motionpro.h +++ /dev/null @@ -1,329 +0,0 @@ -/* - * (C) Copyright 2003-2007 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * Based on Motion-PRO board config file by Robert McCullough, rob@promessinc.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - */ - -/* CPU and board */ -#define CONFIG_MPC5200 1 /* This is a MPC5200 CPU */ -#define CONFIG_MOTIONPRO 1 /* ... on Promess Motion-PRO board */ - -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ - -#define CONFIG_SYS_TEXT_BASE 0xfff00000 - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -/* - * Command line configuration. - */ -#define CONFIG_CMD_REGINFO - -/* - * Serial console configuration - */ -#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ -#define CONFIG_NETCONSOLE 1 /* network console */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } - -/* - * Ethernet configuration - */ -#define CONFIG_MPC5xxx_FEC 1 -#define CONFIG_MPC5xxx_FEC_MII100 -#define CONFIG_PHY_ADDR 0x2 -#define CONFIG_PHY_TYPE 0x79c874 -#define CONFIG_RESET_PHY_R 1 - -/* - * Autobooting - */ -#undef CONFIG_BOOTARGS - -#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ - -/* - * Default environment settings - */ -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "hostname=motionpro\0" \ - "netmask=255.255.255.0\0" \ - "ipaddr=192.168.1.106\0" \ - "serverip=192.168.1.100\0" \ - "gatewayip=192.168.1.100\0" \ - "console=ttyPSC0,115200\0" \ - "u-boot_addr=400000\0" \ - "kernel_addr=400000\0" \ - "fdt_addr=700000\0" \ - "ramdisk_addr=800000\0" \ - "multi_image_addr=800000\0" \ - "rootpath=/opt/eldk-4.2/ppc_6xx\0" \ - "u-boot=/tftpboot/motionpro/u-boot.bin\0" \ - "bootfile=/tftpboot/motionpro/uImage\0" \ - "fdt_file=/tftpboot/motionpro/motionpro.dtb\0" \ - "ramdisk_file=/tftpboot/motionpro/uRamdisk\0" \ - "multi_image_file=kernel+initrd+dtb.img\0" \ - "load=tftp ${u-boot_addr} ${u-boot}\0" \ - "update=prot off fff00000 +${filesize};" \ - "era fff00000 +${filesize}; " \ - "cp.b ${u-boot_addr} fff00000 ${filesize};" \ - "prot on fff00000 +${filesize}\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "fat_args=setenv bootargs root=/dev/sda rw\0" \ - "mtdids=nor0=ff000000.flash\0" \ - "mtdparts=ff000000.flash:13m(fs),2m(kernel),384k(uboot)," \ - "128k(env),128k(redund_env)," \ - "128k(dtb),128k(user_data)\0" \ - "addcons=setenv bootargs ${bootargs} console=${console}\0" \ - "addmtd=setenv bootargs ${bootargs} mtdparts=${mtdparts}\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:" \ - "${netmask}:${hostname}:${netdev}:off panic=1 " \ - "console=${console}\0" \ - "net_nfs=tftp ${kernel_addr} ${bootfile}; " \ - "tftp ${fdt_addr} ${fdt_file}; " \ - "run nfsargs addip addmtd; " \ - "bootm ${kernel_addr} - ${fdt_addr}\0" \ - "net_self=tftp ${kernel_addr} ${bootfile}; " \ - "tftp ${fdt_addr} ${fdt_file}; " \ - "tftp ${ramdisk_addr} ${ramdisk_file}; " \ - "nfs ${ramdisk_addr} ${serverip}:${rootpath}/images/uRamdisk; " \ - "run ramargs addip addcons addmtd; " \ - "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ - "fat_multi=run fat_args addip addmtd; fatload ide 0:1 " \ - "${multi_image_addr} ${multi_image_file}; " \ - "bootm ${multi_image_addr}\0" \ - "" -#define CONFIG_BOOTCOMMAND "run fat_multi" - -/* - * do board-specific init - */ -#define CONFIG_BOARD_EARLY_INIT_R 1 - -/* - * Low level configuration - */ - -/* - * Clock configuration: SYS_XTALIN = 33MHz - */ -#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 - -/* - * Set IPB speed to 100MHz - */ -#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK - -/* - * Memory map - */ -/* - * Warning!!! with the current BestComm Task, MBAR MUST BE set to 0xf0000000. - * Setting MBAR to otherwise will cause system hang when using SmartDMA such - * as network commands. - */ -#define CONFIG_SYS_MBAR 0xf0000000 -#define CONFIG_SYS_SDRAM_BASE 0x00000000 - -/* - * If building for running out of SDRAM, then MBAR has been set up beforehand - * (e.g., by the BDI). Otherwise we must specify the default boot-up value of - * MBAR, as given in the doccumentation. - */ -#if CONFIG_SYS_TEXT_BASE == 0x00100000 -#define CONFIG_SYS_DEFAULT_MBAR 0xf0000000 -#else /* CONFIG_SYS_TEXT_BASE != 0x00100000 */ -#define CONFIG_SYS_DEFAULT_MBAR 0x80000000 -#define CONFIG_SYS_LOWBOOT 1 -#endif /* CONFIG_SYS_TEXT_BASE == 0x00100000 */ - -/* Use SRAM until RAM will be available */ -#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM -#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -#define CONFIG_SYS_RAMBOOT 1 -#endif - -#define CONFIG_SYS_MONITOR_LEN (384 << 10) /* 384 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (1024 << 10) /* 1 MiB for malloc() */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* initial mem map for Linux */ - -/* - * Chip selects configuration - */ -/* Boot Chipselect */ -#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE -#define CONFIG_SYS_BOOTCS_CFG 0x00045D00 - -/* Flash memory addressing */ -#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE -#define CONFIG_SYS_CS0_CFG CONFIG_SYS_BOOTCS_CFG - -/* Dual Port SRAM -- Kollmorgen Drive memory addressing */ -#define CONFIG_SYS_CS1_START 0x50000000 -#define CONFIG_SYS_CS1_SIZE 0x10000 -#define CONFIG_SYS_CS1_CFG 0x05055800 - -/* Local register access */ -#define CONFIG_SYS_CS2_START 0x50010000 -#define CONFIG_SYS_CS2_SIZE 0x10000 -#define CONFIG_SYS_CS2_CFG 0x05055800 - -/* Anybus CompactCom Module memory addressing */ -#define CONFIG_SYS_CS3_START 0x50020000 -#define CONFIG_SYS_CS3_SIZE 0x10000 -#define CONFIG_SYS_CS3_CFG 0x05055800 - -/* No burst and dead cycle = 2 for all CSs */ -#define CONFIG_SYS_CS_BURST 0x00000000 -#define CONFIG_SYS_CS_DEADCYCLE 0x22222222 - -/* - * SDRAM configuration - */ -/* 2 x MT48LC16M16A2BG-75 IT:D, CASL 3, 32 bit data bus */ -#define SDRAM_CONFIG1 0x62322900 -#define SDRAM_CONFIG2 0x88c70000 -#define SDRAM_CONTROL 0x504f0000 -#define SDRAM_MODE 0x00cd0000 - -/* - * Flash configuration - */ -#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */ -#define CONFIG_FLASH_CFI_DRIVER 1 -#define CONFIG_SYS_FLASH_BASE 0xff000000 -#define CONFIG_SYS_FLASH_SIZE 0x01000000 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */ -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max num of sects on one chip */ -#define CONFIG_FLASH_16BIT /* Flash is 16-bit */ - -/* - * MTD configuration - */ -#define CONFIG_CMD_MTDPARTS -#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ -#define CONFIG_FLASH_CFI_MTD -#define MTDIDS_DEFAULT "nor0=motionpro-0" -#define MTDPARTS_DEFAULT "mtdparts=motionpro-0:" \ - "13m(fs),2m(kernel),384k(uboot)," \ - "128k(env),128k(redund_env)," \ - "128k(dtb),-(user_data)" - -/* - * IDE/ATA configuration - */ -#define CONFIG_SYS_ATA_BASE_ADDR MPC5XXX_ATA -#define CONFIG_SYS_IDE_MAXBUS 1 -#define CONFIG_SYS_IDE_MAXDEVICE 1 -#define CONFIG_IDE_PREINIT - -#define CONFIG_SYS_ATA_DATA_OFFSET 0x0060 -#define CONFIG_SYS_ATA_REG_OFFSET CONFIG_SYS_ATA_DATA_OFFSET -#define CONFIG_SYS_ATA_STRIDE 4 - -/* - * RTC configuration - */ -#define CONFIG_RTC_DS1337 1 -#define CONFIG_SYS_I2C_RTC_ADDR 0x68 - -/* - * Status LED configuration - */ - -#define ENABLE_GPIO_OUT 0x00000024 -#define LED_ON 0x00000010 - -/* - * Environment settings - */ -#define CONFIG_ENV_IS_IN_FLASH 1 -/* This has to be a multiple of the Flash sector size */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) -#define CONFIG_ENV_SIZE 0x1000 -#define CONFIG_ENV_SECT_SIZE 0x20000 - -/* Configuration of redundant environment */ -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) - -/* - * Pin multiplexing configuration - */ - -/* PSC1: UART1 - * PSC2: GPIO (default) - * PSC3: GPIO (default) - * USB: 2xUART4/5 - * Ethernet: Ethernet 100Mbit with MD - * Timer: CAN2/GPIO - * PSC6/IRDA: GPIO (default) - */ -#define CONFIG_SYS_GPS_PORT_CONFIG 0x1105a004 - -/* - * Motion-PRO's CPLD revision control register - */ -#define CPLD_REV_REGISTER (CONFIG_SYS_CS2_START + 0x06) - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x03e00000 /* 1 ... 62 MiB in DRAM */ -#define CONFIG_SYS_ALT_MEMTEST - -#define CONFIG_SYS_LOAD_ADDR 0x200000 /* default kernel load addr */ - -/* - * Various low-level settings - */ -#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI -#define CONFIG_SYS_HID0_FINAL HID0_ICE - -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ - -/* Not needed for MPC 5xxx U-Boot, but used by tools/updater */ -#define CONFIG_SYS_RESET_ADDRESS 0xfff00100 - -#define OF_CPU "PowerPC,5200@0" -#define OF_SOC "soc5200@f0000000" -#define OF_TBCLK (bd->bi_busfreq / 4) -#define OF_STDOUT_PATH "/soc5200@f0000000/serial@2000" - -#endif /* __CONFIG_H */ diff --git a/include/configs/mpc5121-common.h b/include/configs/mpc5121-common.h deleted file mode 100644 index d252297e89..0000000000 --- a/include/configs/mpc5121-common.h +++ /dev/null @@ -1,32 +0,0 @@ -/* - * (C) Copyright 2010 DENX Software Engineering - * Anatolij Gustschin agust@denx.de - * - * Common configuration options for MPC5121 based boards - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __MPC5121_COMMON_H -#define __MPC5121_COMMON_H - -/* Use SRAM for initial stack */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_SRAM_BASE /* Init RAM base */ -#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_SRAM_SIZE /* Size of area */ - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4) - -#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest region */ -#define CONFIG_SYS_MEMTEST_END 0x00400000 - -/* - * Serial console - */ -#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} - -#define CONFIG_CMDLINE_EDITING 1 /* command line history */ - -#endif /* __MPC5121_COMMON_H */ diff --git a/include/configs/mpc5121ads.h b/include/configs/mpc5121ads.h deleted file mode 100644 index e11a0e628a..0000000000 --- a/include/configs/mpc5121ads.h +++ /dev/null @@ -1,581 +0,0 @@ -/* - * (C) Copyright 2007-2009 DENX Software Engineering - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * MPC5121ADS board configuration file - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_MPC5121ADS 1 - -/* - * Memory map for the MPC5121ADS board: - * - * 0x0000_0000 - 0x0FFF_FFFF DDR RAM (256 MB) - * 0x3000_0000 - 0x3001_FFFF SRAM (128 KB) - * 0x8000_0000 - 0x803F_FFFF IMMR (4 MB) - * 0x8200_0000 - 0x8200_001F CPLD (32 B) - * 0x8400_0000 - 0x82FF_FFFF PCI I/O space (16 MB) - * 0xA000_0000 - 0xAFFF_FFFF PCI memory space (256 MB) - * 0xB000_0000 - 0xBFFF_FFFF PCI memory mapped I/O space (256 MB) - * 0xFC00_0000 - 0xFFFF_FFFF NOR Boot FLASH (64 MB) - */ - -/* - * High Level Configuration Options - */ -#define CONFIG_E300 1 /* E300 Family */ - -#define CONFIG_SYS_TEXT_BASE 0xFFF00000 - -/* video */ -#ifdef CONFIG_FSL_DIU_FB -#define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_IMMR + 0x2100) -#define CONFIG_VIDEO_LOGO -#define CONFIG_VIDEO_BMP_LOGO -#endif - -/* CONFIG_PCI is defined at config time */ - -#ifdef CONFIG_MPC5121ADS_REV2 -#define CONFIG_SYS_MPC512X_CLKIN 66000000 /* in Hz */ -#else -#define CONFIG_SYS_MPC512X_CLKIN 33333333 /* in Hz */ -#endif - -#define CONFIG_MISC_INIT_R - -#define CONFIG_SYS_IMMR 0x80000000 - -#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest region */ -#define CONFIG_SYS_MEMTEST_END 0x00400000 - -/* - * DDR Setup - manually set all parameters as there's no SPD etc. - */ -#ifdef CONFIG_MPC5121ADS_REV2 -#define CONFIG_SYS_DDR_SIZE 256 /* MB */ -#else -#define CONFIG_SYS_DDR_SIZE 512 /* MB */ -#endif -#define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is system memory*/ -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE -#define CONFIG_SYS_MAX_RAM_SIZE 0x20000000 - -#define CONFIG_SYS_IOCTRL_MUX_DDR 0x00000036 - -/* DDR Controller Configuration - * - * SYS_CFG: - * [31:31] MDDRC Soft Reset: Diabled - * [30:30] DRAM CKE pin: Enabled - * [29:29] DRAM CLK: Enabled - * [28:28] Command Mode: Enabled (For initialization only) - * [27:25] DRAM Row Select: dram_row[15:0] = magenta_address[25:10] - * [24:21] DRAM Bank Select: dram_bank[1:0] = magenta_address[11:10] - * [20:19] Read Test: DON'T USE - * [18:18] Self Refresh: Enabled - * [17:17] 16bit Mode: Disabled - * [16:13] Ready Delay: 2 - * [12:12] Half DQS Delay: Disabled - * [11:11] Quarter DQS Delay: Disabled - * [10:08] Write Delay: 2 - * [07:07] Early ODT: Disabled - * [06:06] On DIE Termination: Disabled - * [05:05] FIFO Overflow Clear: DON'T USE here - * [04:04] FIFO Underflow Clear: DON'T USE here - * [03:03] FIFO Overflow Pending: DON'T USE here - * [02:02] FIFO Underlfow Pending: DON'T USE here - * [01:01] FIFO Overlfow Enabled: Enabled - * [00:00] FIFO Underflow Enabled: Enabled - * TIME_CFG0 - * [31:16] DRAM Refresh Time: 0 CSB clocks - * [15:8] DRAM Command Time: 0 CSB clocks - * [07:00] DRAM Precharge Time: 0 CSB clocks - * TIME_CFG1 - * [31:26] DRAM tRFC: - * [25:21] DRAM tWR1: - * [20:17] DRAM tWRT1: - * [16:11] DRAM tDRR: - * [10:05] DRAM tRC: - * [04:00] DRAM tRAS: - * TIME_CFG2 - * [31:28] DRAM tRCD: - * [27:23] DRAM tFAW: - * [22:19] DRAM tRTW1: - * [18:15] DRAM tCCD: - * [14:10] DRAM tRTP: - * [09:05] DRAM tRP: - * [04:00] DRAM tRPA - */ -#ifdef CONFIG_MPC5121ADS_REV2 -#define CONFIG_SYS_MDDRC_SYS_CFG 0xE8604A00 -#define CONFIG_SYS_MDDRC_TIME_CFG1 0x54EC1168 -#define CONFIG_SYS_MDDRC_TIME_CFG2 0x35210864 -#else -#define CONFIG_SYS_MDDRC_SYS_CFG 0xEA804A00 -#define CONFIG_SYS_MDDRC_TIME_CFG1 0x68EC1168 -#define CONFIG_SYS_MDDRC_TIME_CFG2 0x34310864 -#endif -#define CONFIG_SYS_MDDRC_TIME_CFG0 0x06183D2E - -#define CONFIG_SYS_MDDRC_SYS_CFG_ELPIDA 0xEA802B00 -#define CONFIG_SYS_MDDRC_TIME_CFG1_ELPIDA 0x690e1189 -#define CONFIG_SYS_MDDRC_TIME_CFG2_ELPIDA 0x35310864 - -#define CONFIG_SYS_DDRCMD_NOP 0x01380000 -#define CONFIG_SYS_DDRCMD_PCHG_ALL 0x01100400 -#define CONFIG_SYS_DDRCMD_EM2 0x01020000 -#define CONFIG_SYS_DDRCMD_EM3 0x01030000 -#define CONFIG_SYS_DDRCMD_EN_DLL 0x01010000 -#define CONFIG_SYS_DDRCMD_RFSH 0x01080000 - -#define DDRCMD_EMR_OCD(pr, ohm) ( \ - (1 << 24) | /* MDDRC Command Request */ \ - (1 << 16) | /* MODE Reg BA[2:0] */ \ - (0 << 12) | /* Outputs 0=Enabled */ \ - (0 << 11) | /* RDQS */ \ - (1 << 10) | /* DQS# */ \ - (pr << 7) | /* OCD prog 7=deflt,0=exit */ \ - /* ODT Rtt[1:0] 0=0,1=75,2=150,3=50 */ \ - ((ohm & 0x2) << 5)| /* Rtt1 */ \ - (0 << 3) | /* additive posted CAS# */ \ - ((ohm & 0x1) << 2)| /* Rtt0 */ \ - (0 << 0) | /* Output Drive Strength */ \ - (0 << 0)) /* DLL Enable 0=Normal */ - -#define CONFIG_SYS_DDRCMD_OCD_DEFAULT DDRCMD_EMR_OCD(7, 0) -#define CONFIG_SYS_ELPIDA_OCD_EXIT DDRCMD_EMR_OCD(0, 0) - -#define DDRCMD_MODE_REG(cas, wr) ( \ - (1 << 24) | /* MDDRC Command Request */ \ - (0 << 16) | /* MODE Reg BA[2:0] */ \ - ((wr-1) << 9)| /* Write Recovery */ \ - (cas << 4) | /* CAS */ \ - (0 << 3) | /* Burst Type:0=Sequential,1=Interleaved */ \ - (2 << 0)) /* 4 or 8 Burst Length:0x2=4 0x3=8 */ - -#define CONFIG_SYS_MICRON_INIT_DEV_OP DDRCMD_MODE_REG(3, 3) -#define CONFIG_SYS_ELPIDA_INIT_DEV_OP DDRCMD_MODE_REG(4, 4) -#define CONFIG_SYS_ELPIDA_RES_DLL (DDRCMD_MODE_REG(4, 4) | (1 << 8)) - -/* DDR Priority Manager Configuration */ -#define CONFIG_SYS_MDDRCGRP_PM_CFG1 0x00077777 -#define CONFIG_SYS_MDDRCGRP_PM_CFG2 0x00000000 -#define CONFIG_SYS_MDDRCGRP_HIPRIO_CFG 0x00000001 -#define CONFIG_SYS_MDDRCGRP_LUT0_MU 0xFFEEDDCC -#define CONFIG_SYS_MDDRCGRP_LUT0_ML 0xBBAAAAAA -#define CONFIG_SYS_MDDRCGRP_LUT1_MU 0x66666666 -#define CONFIG_SYS_MDDRCGRP_LUT1_ML 0x55555555 -#define CONFIG_SYS_MDDRCGRP_LUT2_MU 0x44444444 -#define CONFIG_SYS_MDDRCGRP_LUT2_ML 0x44444444 -#define CONFIG_SYS_MDDRCGRP_LUT3_MU 0x55555555 -#define CONFIG_SYS_MDDRCGRP_LUT3_ML 0x55555558 -#define CONFIG_SYS_MDDRCGRP_LUT4_MU 0x11111111 -#define CONFIG_SYS_MDDRCGRP_LUT4_ML 0x11111122 -#define CONFIG_SYS_MDDRCGRP_LUT0_AU 0xaaaaaaaa -#define CONFIG_SYS_MDDRCGRP_LUT0_AL 0xaaaaaaaa -#define CONFIG_SYS_MDDRCGRP_LUT1_AU 0x66666666 -#define CONFIG_SYS_MDDRCGRP_LUT1_AL 0x66666666 -#define CONFIG_SYS_MDDRCGRP_LUT2_AU 0x11111111 -#define CONFIG_SYS_MDDRCGRP_LUT2_AL 0x11111111 -#define CONFIG_SYS_MDDRCGRP_LUT3_AU 0x11111111 -#define CONFIG_SYS_MDDRCGRP_LUT3_AL 0x11111111 -#define CONFIG_SYS_MDDRCGRP_LUT4_AU 0x11111111 -#define CONFIG_SYS_MDDRCGRP_LUT4_AL 0x11111111 - -/* - * NOR FLASH on the Local Bus - */ -#undef CONFIG_BKUP_FLASH -#define CONFIG_SYS_FLASH_CFI /* use the Common Flash Interface */ -#define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */ -#ifdef CONFIG_BKUP_FLASH -#define CONFIG_SYS_FLASH_BASE 0xFF800000 /* start of FLASH */ -#define CONFIG_SYS_FLASH_SIZE 0x00800000 /* max flash size in bytes */ -#else -#define CONFIG_SYS_FLASH_BASE 0xFC000000 /* start of FLASH */ -#define CONFIG_SYS_FLASH_SIZE 0x04000000 /* max flash size in bytes */ -#endif -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ -#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE} -#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max sectors per device */ - -#undef CONFIG_SYS_FLASH_CHECKSUM - -/* - * NAND FLASH - * drivers/mtd/nand/mpc5121_nfc.c (rev 2 silicon only) - */ -#define CONFIG_CMD_NAND /* enable NAND support */ -#define CONFIG_JFFS2_NAND /* with JFFS2 on it */ -#define CONFIG_NAND_MPC5121_NFC -#define CONFIG_SYS_NAND_BASE 0x40000000 - -#define CONFIG_SYS_MAX_NAND_DEVICE 2 -#define CONFIG_SYS_NAND_SELECT_DEVICE /* driver supports mutipl. chips */ - -/* - * Configuration parameters for MPC5121 NAND driver - */ -#define CONFIG_FSL_NFC_WIDTH 1 -#define CONFIG_FSL_NFC_WRITE_SIZE 2048 -#define CONFIG_FSL_NFC_SPARE_SIZE 64 -#define CONFIG_FSL_NFC_CHIPS CONFIG_SYS_MAX_NAND_DEVICE - -/* - * CPLD registers area is really only 32 bytes in size, but the smallest possible LP - * window is 64KB - */ -#define CONFIG_SYS_CPLD_BASE 0x82000000 -#define CONFIG_SYS_CPLD_SIZE 0x00010000 /* 64 KB */ -#define CONFIG_SYS_CS2_START CONFIG_SYS_CPLD_BASE -#define CONFIG_SYS_CS2_SIZE CONFIG_SYS_CPLD_SIZE - -#define CONFIG_SYS_SRAM_BASE 0x30000000 -#define CONFIG_SYS_SRAM_SIZE 0x00020000 /* 128 KB */ - -#define CONFIG_SYS_CS0_CFG 0x05059310 /* ALE active low, data size 4bytes */ -#define CONFIG_SYS_CS2_CFG 0x05059010 /* ALE active low, data size 1byte */ -#define CONFIG_SYS_CS_ALETIMING 0x00000005 /* Use alternative CS timing for CS0 and CS2 */ - -/* Use SRAM for initial stack */ -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_SRAM_BASE /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_SRAM_SIZE /* Size of used area in RAM */ - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* Start of monitor */ -#define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Mon */ -#ifdef CONFIG_FSL_DIU_FB -#define CONFIG_SYS_MALLOC_LEN (6 * 1024 * 1024) /* Reserved for malloc */ -#else -#define CONFIG_SYS_MALLOC_LEN (512 * 1024) -#endif - -/* - * Serial Port - */ -#define CONFIG_CONS_INDEX 1 - -/* - * Serial console configuration - */ -#define CONFIG_PSC_CONSOLE 3 /* console is on PSC3 */ -#define CONFIG_SYS_PSC3 -#if CONFIG_PSC_CONSOLE != 3 -#error CONFIG_PSC_CONSOLE must be 3 -#endif -#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} - -#define CONSOLE_FIFO_TX_SIZE FIFOC_PSC3_TX_SIZE -#define CONSOLE_FIFO_TX_ADDR FIFOC_PSC3_TX_ADDR -#define CONSOLE_FIFO_RX_SIZE FIFOC_PSC3_RX_SIZE -#define CONSOLE_FIFO_RX_ADDR FIFOC_PSC3_RX_ADDR - -#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ - -/* - * Clocks in use - */ -#define SCCR1_CLOCKS_EN (CLOCK_SCCR1_CFG_EN | \ - CLOCK_SCCR1_DDR_EN | \ - CLOCK_SCCR1_FEC_EN | \ - CLOCK_SCCR1_LPC_EN | \ - CLOCK_SCCR1_NFC_EN | \ - CLOCK_SCCR1_PATA_EN | \ - CLOCK_SCCR1_PCI_EN | \ - CLOCK_SCCR1_PSC_EN(CONFIG_PSC_CONSOLE) | \ - CLOCK_SCCR1_PSCFIFO_EN | \ - CLOCK_SCCR1_TPR_EN) - -#define SCCR2_CLOCKS_EN (CLOCK_SCCR2_DIU_EN | \ - CLOCK_SCCR2_I2C_EN | \ - CLOCK_SCCR2_MEM_EN | \ - CLOCK_SCCR2_SPDIF_EN | \ - CLOCK_SCCR2_USB1_EN | \ - CLOCK_SCCR2_USB2_EN) - -/* - * PCI - */ -#ifdef CONFIG_PCI -#define CONFIG_PCI_INDIRECT_BRIDGE - -/* - * General PCI - */ -#define CONFIG_SYS_PCI_MEM_BASE 0xA0000000 -#define CONFIG_SYS_PCI_MEM_PHYS CONFIG_SYS_PCI_MEM_BASE -#define CONFIG_SYS_PCI_MEM_SIZE 0x10000000 /* 256M */ -#define CONFIG_SYS_PCI_MMIO_BASE (CONFIG_SYS_PCI_MEM_BASE + CONFIG_SYS_PCI_MEM_SIZE) -#define CONFIG_SYS_PCI_MMIO_PHYS CONFIG_SYS_PCI_MMIO_BASE -#define CONFIG_SYS_PCI_MMIO_SIZE 0x10000000 /* 256M */ -#define CONFIG_SYS_PCI_IO_BASE 0x00000000 -#define CONFIG_SYS_PCI_IO_PHYS 0x84000000 -#define CONFIG_SYS_PCI_IO_SIZE 0x01000000 /* 16M */ - -#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ - -#endif - -/* - * IIM - IC Identification Module - */ -#undef CONFIG_FSL_IIM - -/* - * Ethernet configuration - */ -#define CONFIG_MPC512x_FEC 1 -#define CONFIG_PHY_ADDR 0x1 -#define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_FEC_AN_TIMEOUT 1 -#define CONFIG_HAS_ETH0 - -/* - * Configure on-board RTC - */ -#define CONFIG_RTC_M41T62 /* use M41T62 rtc via i2 */ -#define CONFIG_SYS_I2C_RTC_ADDR 0x68 /* at address 0x68 */ - -/* - * USB Support - */ - -#if defined(CONFIG_CMD_USB) -#define CONFIG_USB_EHCI_FSL /* On a FSL platform */ -#define CONFIG_EHCI_MMIO_BIG_ENDIAN /* With big-endian regs */ -#define CONFIG_EHCI_DESC_BIG_ENDIAN -#define CONFIG_EHCI_IS_TDI -#endif - -/* - * Environment - */ -#define CONFIG_ENV_IS_IN_FLASH 1 -/* This has to be a multiple of the Flash sector size */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) -#define CONFIG_ENV_SIZE 0x2000 -#ifdef CONFIG_BKUP_FLASH -#define CONFIG_ENV_SECT_SIZE 0x20000 /* one sector (256K) for env */ -#else -#define CONFIG_ENV_SECT_SIZE 0x40000 /* one sector (256K) for env */ -#endif - -/* Address and size of Redundant Environment Sector */ -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - -#define CONFIG_CMD_REGINFO - -#if defined(CONFIG_PCI) -#define CONFIG_CMD_PCI -#endif - -/* - * Dynamic MTD partition support - */ -#define CONFIG_CMD_MTDPARTS -#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ -#define CONFIG_FLASH_CFI_MTD -#define MTDIDS_DEFAULT "nor0=fc000000.flash,nand0=mpc5121.nand" - -/* - * NOR flash layout: - * - * FC000000 - FEABFFFF 42.75 MiB User Data - * FEAC0000 - FFABFFFF 16 MiB Root File System - * FFAC0000 - FFEBFFFF 4 MiB Linux Kernel - * FFEC0000 - FFEFFFFF 256 KiB Device Tree - * FFF00000 - FFFFFFFF 1 MiB U-Boot (up to 512 KiB) and 2 x * env - * - * NAND flash layout: one big partition - */ -#define MTDPARTS_DEFAULT "mtdparts=fc000000.flash:43776k(user)," \ - "16m(rootfs)," \ - "4m(kernel)," \ - "256k(dtb)," \ - "1m(u-boot);" \ - "mpc5121.nand:-(data)" - -#if defined(CONFIG_IDE) || defined(CONFIG_CMD_EXT2) || defined(CONFIG_CMD_USB) -#define CONFIG_SUPPORT_VFAT - -#endif /* defined(CONFIG_IDE) */ - -/* - * Watchdog timeout = CONFIG_SYS_WATCHDOG_VALUE * 65536 / IPS clock. - * For example, when IPS is set to 66MHz and CONFIG_SYS_WATCHDOG_VALUE is set - * to 0xFFFF, watchdog timeouts after about 64s. For details refer - * to chapter 36 of the MPC5121e Reference Manual. - */ -/* #define CONFIG_WATCHDOG */ /* enable watchdog */ -#define CONFIG_SYS_WATCHDOG_VALUE 0xFFFF - - /* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ - -#ifdef CONFIG_CMD_KGDB - #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else - #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif - -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 256 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* Initial Memory map for Linux*/ - -/* Cache Configuration */ -#define CONFIG_SYS_DCACHE_SIZE 32768 -#define CONFIG_SYS_CACHELINE_SIZE 32 -#ifdef CONFIG_CMD_KGDB -#define CONFIG_SYS_CACHELINE_SHIFT 5 /*log base 2 of the above value*/ -#endif - -#define CONFIG_SYS_HID0_INIT 0x000000000 -#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | HID0_ICE) -#define CONFIG_SYS_HID2 HID2_HBE - -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ - -#ifdef CONFIG_CMD_KGDB -#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ -#endif - -/* - * Environment Configuration - */ -#define CONFIG_TIMESTAMP - -#define CONFIG_HOSTNAME mpc5121ads -#define CONFIG_BOOTFILE "mpc5121ads/uImage" -#define CONFIG_ROOTPATH "/opt/eldk/ppc_6xx" - -#define CONFIG_LOADADDR 400000 /* default location for tftp and bootm */ - -#undef CONFIG_BOOTARGS /* the boot command will set bootargs */ - -#define CONFIG_PREBOOT "echo;" \ - "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ - "echo" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "u-boot_addr_r=200000\0" \ - "kernel_addr_r=600000\0" \ - "fdt_addr_r=880000\0" \ - "ramdisk_addr_r=900000\0" \ - "u-boot_addr=FFF00000\0" \ - "kernel_addr=FFAC0000\0" \ - "fdt_addr=FFEC0000\0" \ - "ramdisk_addr=FEAC0000\0" \ - "ramdiskfile=mpc5121ads/uRamdisk\0" \ - "u-boot=mpc5121ads/u-boot.bin\0" \ - "bootfile=mpc5121ads/uImage\0" \ - "fdtfile=mpc5121ads/mpc5121ads.dtb\0" \ - "rootpath=/opt/eldk/ppc_6xx\n" \ - "netdev=eth0\0" \ - "consdev=ttyPSC0\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "addtty=setenv bootargs ${bootargs} " \ - "console=${consdev},${baudrate}\0" \ - "flash_nfs=run nfsargs addip addtty;" \ - "bootm ${kernel_addr} - ${fdt_addr}\0" \ - "flash_self=run ramargs addip addtty;" \ - "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ - "net_nfs=tftp ${kernel_addr_r} ${bootfile};" \ - "tftp ${fdt_addr_r} ${fdtfile};" \ - "run nfsargs addip addtty;" \ - "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \ - "net_self=tftp ${kernel_addr_r} ${bootfile};" \ - "tftp ${ramdisk_addr_r} ${ramdiskfile};" \ - "tftp ${fdt_addr_r} ${fdtfile};" \ - "run ramargs addip addtty;" \ - "bootm ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}\0"\ - "load=tftp ${u-boot_addr_r} ${u-boot}\0" \ - "update=protect off ${u-boot_addr} +${filesize};" \ - "era ${u-boot_addr} +${filesize};" \ - "cp.b ${u-boot_addr_r} ${u-boot_addr} ${filesize}\0" \ - "upd=run load update\0" \ - "" - -#define CONFIG_BOOTCOMMAND "run flash_self" - -#define CONFIG_OF_SUPPORT_OLD_DEVICE_TREES 1 - -#define OF_CPU "PowerPC,5121@0" -#define OF_SOC_COMPAT "fsl,mpc5121-immr" -#define OF_TBCLK (bd->bi_busfreq / 4) -#define OF_STDOUT_PATH "/soc@80000000/serial@11300" - -/*----------------------------------------------------------------------- - * IDE/ATA stuff - *----------------------------------------------------------------------- - */ - -#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */ -#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ -#undef CONFIG_IDE_LED /* LED for IDE not supported */ - -#define CONFIG_IDE_RESET /* reset for IDE supported */ -#define CONFIG_IDE_PREINIT - -#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ -#define CONFIG_SYS_IDE_MAXDEVICE 2 /* max. 1 drive per IDE bus */ - -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 -#define CONFIG_SYS_ATA_BASE_ADDR get_pata_base() - -/* Offset for data I/O RefMan MPC5121EE Table 28-10 */ -#define CONFIG_SYS_ATA_DATA_OFFSET (0x00A0) - -/* Offset for normal register accesses */ -#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET) - -/* Offset for alternate registers RefMan MPC5121EE Table 28-23 */ -#define CONFIG_SYS_ATA_ALT_OFFSET (0x00D8) - -/* Interval between registers */ -#define CONFIG_SYS_ATA_STRIDE 4 - -#define ATA_BASE_ADDR get_pata_base() - -/* - * Control register bit definitions - */ -#define FSL_ATA_CTRL_FIFO_RST_B 0x80000000 -#define FSL_ATA_CTRL_ATA_RST_B 0x40000000 -#define FSL_ATA_CTRL_FIFO_TX_EN 0x20000000 -#define FSL_ATA_CTRL_FIFO_RCV_EN 0x10000000 -#define FSL_ATA_CTRL_DMA_PENDING 0x08000000 -#define FSL_ATA_CTRL_DMA_ULTRA 0x04000000 -#define FSL_ATA_CTRL_DMA_WRITE 0x02000000 -#define FSL_ATA_CTRL_IORDY_EN 0x01000000 - -#endif /* __CONFIG_H */ diff --git a/include/configs/munices.h b/include/configs/munices.h deleted file mode 100644 index ad2d69e6a5..0000000000 --- a/include/configs/munices.h +++ /dev/null @@ -1,186 +0,0 @@ -/* - * (C) Copyright 2007 - * Heiko Schocher, DENX Software Engineering, hs@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */ -#define CONFIG_MPC5200_DDR 1 /* (with DDR-SDRAM) */ -#define CONFIG_MUNICES 1 /* ... on MUNICes board */ - -#ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xFFF00000 -#endif - -#define CONFIG_SYS_MPC5XXX_CLKIN 33333333 /* ... running at 33.333333MHz */ -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ - -/* - * Command line configuration. - */ -#define CONFIG_CMD_REGINFO - -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -/* - * Serial console configuration - */ -#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } - -#define CONFIG_TIMESTAMP 1 /* Print image info with timestamp */ -#undef CONFIG_BOOTARGS - -#define CONFIG_PREBOOT "echo;" \ - "echo Type "run net_nfs" to load Kernel over TFTP and to mount root filesystem over NFS;" \ - "echo" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$(serverip):$(rootpath)\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "addip=setenv bootargs $(bootargs) " \ - "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \ - ":$(hostname):$(netdev):off panic=5\0" \ - "flash_nfs=run nfsargs addip;" \ - "bootm $(kernel_addr)\0" \ - "flash_self=run ramargs addip;" \ - "bootm $(kernel_addr) $(ramdisk_addr)\0" \ - "net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0" \ - "rootpath=/opt/eldk/ppc_6xx\0" \ - "bootfile=/tftpboot/munices/u-boot.bin\0" \ - "update=tftpboot 200000 ${bootfile};protect off fff00000 fff3ffff;" \ - "erase fff00000 fff3ffff; cp.b 200000 FFF00000 ${filesize}\0" \ - "" -#define CONFIG_BOOTCOMMAND "run net_nfs" - -/* - * IPB Bus clocking configuration. - */ -#define CONFIG_SYS_IPBSPEED_133 /* define for 133MHz speed */ -#if defined(CONFIG_SYS_IPBSPEED_133) -/* - * PCI Bus clocking configuration - * - * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if - * CONFIG_SYS_IPBSPEED_133 is defined. This is because a PCI Clock of 66 MHz yet hasn't - * been tested with a IPB Bus Clock of 66 MHz. - */ -#define CONFIG_SYS_PCISPEED_66 /* define for 66MHz speed */ -#else -#undef CONFIG_SYS_PCISPEED_66 /* for 33MHz speed */ -#endif - -/* - * Memory map - */ -#define CONFIG_SYS_MBAR 0xF0000000 /* MBAR hast to be switched by other bootloader or debugger config */ - -#define CONFIG_SYS_DEFAULT_MBAR 0x80000000 -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -/* Use SRAM until RAM will be available */ -#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM -#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE /* Size of used area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -# define CONFIG_SYS_RAMBOOT 1 -#endif - -#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/* - * Flash configuration - */ -#define CONFIG_SYS_FLASH_BASE 0xFF000000 -#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */ -#define CONFIG_FLASH_CFI_DRIVER 1 /* Use the common driver */ -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } -#define CONFIG_SYS_FLASH_EMPTY_INFO -#define CONFIG_SYS_FLASH_SIZE 0x01000000 /* 16 MByte */ -#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max num of sects on one chip */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks (= chip selects) */ -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* not supported yet for AMD */ - -/* - * Chip selects configuration - */ -/* Boot Chipselect */ -#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE -#define CONFIG_SYS_BOOTCS_CFG 0x00047800 - -/* - * Environment settings - */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_OFFSET 0x40000 -#define CONFIG_ENV_ADDR (CONFIG_SYS_TEXT_BASE + CONFIG_ENV_OFFSET) -#define CONFIG_ENV_SECT_SIZE 0x20000 -#define CONFIG_ENV_SIZE 0x4000 -#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_ADDR_REDUND (CONFIG_SYS_TEXT_BASE + CONFIG_ENV_OFFSET_REDUND) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) -#define CONFIG_ENV_OVERWRITE 1 - -/* - * Ethernet configuration - */ -#define CONFIG_MPC5xxx_FEC 1 -#define CONFIG_MPC5xxx_FEC_MII100 -#define CONFIG_PHY_ADDR 0x01 -#define CONFIG_MII 1 - -/* - * GPIO configuration - */ -#define CONFIG_SYS_GPS_PORT_CONFIG 0x00058044 /* PSC1=UART, PSC2=UART ; Ether=100MBit with MD - no PCI */ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x200000 /* default load address */ - -#define CONFIG_CMDLINE_EDITING 1 - -/* - * Various low-level settings - */ -#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI -#define CONFIG_SYS_HID0_FINAL HID0_ICE - -#define CONFIG_SYS_CS_BURST 0x00000000 -#define CONFIG_SYS_CS_DEADCYCLE 0x33333333 -#define CONFIG_SYS_RESET_ADDRESS 0xff000000 - -#define OF_CPU "PowerPC,5200@0" -#define OF_TBCLK (bd->bi_busfreq / 4) -#define OF_SOC "soc5200@f0000000" -#define OF_STDOUT_PATH "/soc5200@f0000000/serial@2000" - -#endif /* __CONFIG_H */ diff --git a/include/configs/o2d.h b/include/configs/o2d.h deleted file mode 100644 index 4b36af699a..0000000000 --- a/include/configs/o2d.h +++ /dev/null @@ -1,74 +0,0 @@ -/* - * (C) Copyright 2012 - * DENX Software Engineering, Anatolij Gustschin agust@denx.de - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Valid values for CONFIG_SYS_TEXT_BASE are: - * 0xFC000000 boot low boot high (standard configuration) - * 0x00100000 boot from RAM (for testing only) - */ -#ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xfc000000 /* Standard: boot low */ -#endif - -/* Board specific flash config */ -#define CONFIG_SYS_FLASH_BASE 0xfc000000 -#define CONFIG_SYS_FLASH_SIZE 0x04000000 /* maximum 64MB */ -/* max number of sectors on one chip */ -#define CONFIG_SYS_MAX_FLASH_SECT 512 - -/* - * Include common defines for all ifm boards - */ -#include "o2dnt-common.h" - -/* - * GPIO configuration: - * CS1 SDRAM activate + no CAN + no PCI - */ -#define CONFIG_SYS_GPS_PORT_CONFIG 0x8000A004 - -/* Other board specific configs */ -#define CONFIG_SYS_BOOTCS_CFG 0x00057d01 -#define CONFIG_SYS_RESET_ADDRESS 0xfc000000 - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x07f00000 /* 1 - 127 MB in DRAM */ - -#define CONFIG_BOARD_NAME "o2d" -#define CONFIG_BOARD_BOOTCMD "run dhcp_boot" -#define CONFIG_BOARD_MEM_LIMIT __stringify(126) -#define BOARD_POST_CRC32_END __stringify(0x01000000) - -#define CONFIG_EXTRA_ENV_SETTINGS \ - CONFIG_IFM_DEFAULT_ENV_SETTINGS \ - CONFIG_IFM_DEFAULT_ENV_OLD \ - CONFIG_IFM_DEFAULT_ENV_NEW \ - "linbot=fc060000\0" \ - "lintop=fc15ffff\0" \ - "rambot=fc160000\0" \ - "ramtop=fc55ffff\0" \ - "jffbot=fc560000\0" \ - "jfftop=fcffffff\0" \ - "ubobot=" __stringify(CONFIG_SYS_FLASH_BASE) "\0" \ - "ubotop=fc03ffff\0" \ - "kernel_addr=0xfc060000\0" \ - "ramdisk_addr=0xfc160000\0" \ - "progCram=tftp ${fileaddr} ${cramfsname};" \ - "erase ${rambot} ${ramtop};" \ - "cp.b ${fileaddr} ${rambot} ${filesize}\0" \ - "flash_for_configs=22396\0" \ - "flash_mtd=run mtd_args addip addmem;" \ - "bootm ${kernel_addr}\0" \ - "mtd_args=setenv bootargs root=/dev/mtdblock3 " \ - "rw rootfstype=cramfs\0" \ - "master=mw f0000b00 0x8005A006;mw f0000b0c ${IOpin};" \ - "mw f0000b04 ${IOpin};mw f0000b10 0x20\0" \ - "dhcp_boot=run dhcpcmd;run flash_mtd\0" \ - "hostname=IFM_SENSOR\0" \ - "netretry=once\0" \ - "autoload=no\0" \ - "sensorType=O2D222AG\0" diff --git a/include/configs/o2d300.h b/include/configs/o2d300.h deleted file mode 100644 index a8222d9f97..0000000000 --- a/include/configs/o2d300.h +++ /dev/null @@ -1,81 +0,0 @@ -/* - * (C) Copyright 2012 - * DENX Software Engineering, Anatolij Gustschin agust@denx.de - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Valid values for CONFIG_SYS_TEXT_BASE are: - * 0xFC000000 boot low boot high (standard configuration) - * 0x00100000 boot from RAM (for testing only) - */ -#ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xfc000000 /* Standard: boot low */ -#endif - -/* Board specific flash config */ -#define CONFIG_SYS_FLASH_BASE 0xfc000000 -#define CONFIG_SYS_FLASH_SIZE 0x04000000 /* maximum 64MB */ -/* max number of sectors on one chip */ -#define CONFIG_SYS_MAX_FLASH_SECT 512 - -/* - * Include common defines for all ifm boards - */ -#include "o2dnt-common.h" - -/* - * GPIO configuration: - * CS1 SDRAM activate + no CAN + no PCI - */ -#define CONFIG_SYS_GPS_PORT_CONFIG 0x8000A004 - -/* Other board specific configs */ -#define CONFIG_SYS_BOOTCS_CFG 0x00057d01 -#define CONFIG_SYS_RESET_ADDRESS 0xfc000000 - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x07f00000 /* 1 - 127 MB in DRAM */ - -/* Use redundant environment */ -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) - -#define CONFIG_BOARD_NAME "o2d300" -#define CONFIG_BOARD_BOOTCMD "run dhcp_boot" -#define CONFIG_BOARD_MEM_LIMIT __stringify(126) -#define BOARD_POST_CRC32_END __stringify(0x02000000) - -#define CONFIG_EXTRA_ENV_SETTINGS \ - CONFIG_IFM_DEFAULT_ENV_SETTINGS \ - CONFIG_IFM_DEFAULT_ENV_OLD \ - CONFIG_IFM_DEFAULT_ENV_NEW \ - "autoload=no\0" \ - "dhcp_boot=run dhcpcmd;run flash_mtd\0" \ - "flash_mtd=run mtd_args addip addmem;" \ - "bootm ${kernel_addr}\0" \ - "mtd_args=setenv bootargs root=/dev/mtdblock4 " \ - "rw rootfstype=cramfs\0" \ - "linbot=fc080000\0" \ - "lintop=fc17ffff\0" \ - "rambot=fc180000\0" \ - "ramtop=fc57ffff\0" \ - "jffbot=fc580000\0" \ - "jfftop=fd39ffff\0" \ - "ubobot=" __stringify(CONFIG_SYS_FLASH_BASE) "\0" \ - "ubotop=fc03ffff\0" \ - "halname="CONFIG_BOARD_NAME"/"CONFIG_BOARD_NAME"_halcon\0" \ - "halbot=fd3a0000\0" \ - "haltop=fdf9ffff\0" \ - "progHal=tftp 200000 ${halname};erase ${halbot} ${haltop};" \ - "cp.b ${fileaddr} ${halbot} ${filesize}\0" \ - "kernel_addr=0xfc060000\0" \ - "ramdisk_addr=0xfc160000\0" \ - "master=mw f0000b00 0x8005A006;mw f0000b0c ${IOpin};" \ - "mw f0000b04 ${IOpin};mw f0000b10 0x20\0" \ - "netretry=once\0" \ - "protcmd=protect on ${linbot} ${lintop};" \ - "protect on ${rambot} ${ramtop}\0" \ - "o2derror=def_env\0" \ - "sensorType=O2D300AA\0" diff --git a/include/configs/o2dnt-common.h b/include/configs/o2dnt-common.h deleted file mode 100644 index 1b4200bcbf..0000000000 --- a/include/configs/o2dnt-common.h +++ /dev/null @@ -1,300 +0,0 @@ -/* - * Common configuration options for ifm camera boards - * - * (C) Copyright 2005 - * Sebastien Cazaux, ifm electronic gmbh - * - * (C) Copyright 2012 - * DENX Software Engineering, Anatolij Gustschin agust@denx.de - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __O2D_CONFIG_H -#define __O2D_CONFIG_H - -/* - * High Level Configuration Options - */ -#define CONFIG_MPC5200 - -#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* running at 33.000000MHz */ - -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if defined(CONFIG_CMD_KGDB) -/* log base 2 of the above value */ -#define CONFIG_SYS_CACHELINE_SHIFT 5 -#endif - -/* -#define CONFIG_POST (CONFIG_SYS_POST_MEMORY | \ - CONFIG_SYS_POST_I2C) -*/ - -#ifdef CONFIG_POST -/* preserve space for the post_word at end of on-chip SRAM */ -#define MPC5XXX_SRAM_POST_SIZE (MPC5XXX_SRAM_SIZE - 4) -#endif - -/* - * Serial console configuration - */ -#define CONFIG_PSC_CONSOLE 5 /* console is on PSC5 */ -#define CONFIG_SYS_BAUDRATE_TABLE \ - { 9600, 19200, 38400, 57600, 115200, 230400 } - -/* - * PCI Mapping: - * 0x40000000 - 0x4fffffff - PCI Memory - * 0x50000000 - 0x50ffffff - PCI IO Space - */ - -#define CONFIG_PCI_MEM_BUS 0x40000000 -#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS -#define CONFIG_PCI_MEM_SIZE 0x10000000 - -#define CONFIG_PCI_IO_BUS 0x50000000 -#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS -#define CONFIG_PCI_IO_SIZE 0x01000000 - -#define CONFIG_SYS_XLB_PIPELINING 1 - -/* Partitions */ - -#define CONFIG_TIMESTAMP /* Print image info with timestamp */ - -#define CONFIG_SYS_ALT_MEMTEST /* Much more complex memory test */ - -/* - * Supported commands - */ -#ifdef CONFIG_PCI -#define CONFIG_CMD_PCI -#endif - -#if (CONFIG_SYS_TEXT_BASE == 0xFC000000) || (CONFIG_SYS_TEXT_BASE == 0xFF000000) -/* Boot low with 16 or 32 MB Flash */ -#define CONFIG_SYS_LOWBOOT 1 -#elif (CONFIG_SYS_TEXT_BASE != 0x00100000) -#error "CONFIG_SYS_TEXT_BASE value is invalid" -#endif - - -#define CONFIG_PREBOOT "run master" - -#undef CONFIG_BOOTARGS - -#if !defined(CONSOLE_DEV) -#define CONSOLE_DEV "ttyPSC1" -#endif - -/* - * Default environment for booting old and new kernel versions - */ -#define CONFIG_IFM_DEFAULT_ENV_OLD \ - "flash_self_old=run ramargs addip addmem;" \ - "bootm ${kernel_addr} ${ramdisk_addr}\0" \ - "flash_nfs_old=run nfsargs addip addmem;" \ - "bootm ${kernel_addr}\0" \ - "net_nfs_old=tftp ${kernel_addr_r} ${bootfile};" \ - "run nfsargs addip addmem;" \ - "bootm ${kernel_addr_r}\0" - -#define CONFIG_IFM_DEFAULT_ENV_NEW \ - "fdt_addr_r=900000\0" \ - "fdt_file="CONFIG_BOARD_NAME"/"CONFIG_BOARD_NAME".dtb\0" \ - "flash_self=run ramargs addip addtty addmisc;" \ - "bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \ - "flash_nfs=run nfsargs addip addtty addmisc;" \ - "bootm ${kernel_addr} - ${fdt_addr}\0" \ - "net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \ - "tftp ${fdt_addr_r} ${fdt_file}; " \ - "run nfsargs addip addtty addmisc;" \ - "bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \ - -#define CONFIG_IFM_DEFAULT_ENV_SETTINGS \ - "IOpin=0x64\0" \ - "addip=setenv bootargs ${bootargs} " \ - "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ - ":${hostname}:${netdev}:off panic=1\0" \ - "addmem=setenv bootargs ${bootargs} ${memlimit}\0" \ - "addmisc=sete bootargs ${bootargs} ${miscargs}\0" \ - "addtty=sete bootargs ${bootargs} console=" \ - CONSOLE_DEV ",${baudrate}\0" \ - "bootfile="CONFIG_BOARD_NAME"/uImage_"CONFIG_BOARD_NAME"_act\0" \ - "kernel_addr_r=600000\0" \ - "initrd_high=0x03e00000\0" \ - "memlimit=mem="CONFIG_BOARD_MEM_LIMIT"M\0" \ - "memtest=mtest 0x00100000 "__stringify(CONFIG_SYS_MEMTEST_END)" 0 1\0" \ - "netdev=eth0\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=${serverip}:${rootpath}\0" \ - "ramargs=setenv bootargs root=/dev/ram rw\0" \ - "linuxname="CONFIG_BOARD_NAME"/uImage_"CONFIG_BOARD_NAME"_act\0"\ - "progLinux=tftp 200000 ${linuxname};erase ${linbot} ${lintop};" \ - "cp.b ${fileaddr} ${linbot} ${filesize}\0" \ - "ramname="CONFIG_BOARD_NAME"/uRamdisk_"CONFIG_BOARD_NAME"_act\0"\ - "progRam=tftp 200000 ${ramname};erase ${rambot} ${ramtop};" \ - "cp.b ${fileaddr} ${rambot} ${filesize}\0" \ - "jffname="CONFIG_BOARD_NAME"/uJFFS2_"CONFIG_BOARD_NAME"_act\0" \ - "progJff=tftp 200000 ${jffname};erase ${jffbot} ${jfftop};" \ - "cp.b ${fileaddr} ${jffbot} ${filesize}\0" \ - "rootpath=/opt/eldk/ppc_6xx\0" \ - "uboname=" CONFIG_BOARD_NAME \ - "/u-boot.bin_" CONFIG_BOARD_NAME "_act\0" \ - "progubo=tftp 200000 ${uboname};" \ - "protect off ${ubobot} ${ubotop};" \ - "erase ${ubobot} ${ubotop};" \ - "cp.b ${fileaddr} ${ubobot} ${filesize}\0" \ - "unlock=yes\0" \ - "post=echo !!! "CONFIG_BOARD_NAME" POWER ON SELF TEST !!!;" \ - "setenv bootdelay 1;" \ - "crc32 "__stringify(CONFIG_SYS_TEXT_BASE)" " \ - BOARD_POST_CRC32_END";" \ - "setenv bootcmd "CONFIG_BOARD_BOOTCMD";saveenv;reset\0" - -#define CONFIG_BOOTCOMMAND "run post" - -/* - * IPB Bus clocking configuration. - */ -#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ - -#if defined(CONFIG_SYS_IPBCLK_EQUALS_XLBCLK) -/* - * PCI Bus clocking configuration - * - * Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if - * CONFIG_SYS_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock - * of 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz. - */ -#define CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2 /* define for 66MHz speed */ -#endif - -/* - * There is no write delay with FRAM, write operations are performed at bus - * speed. Thus, no status polling or write delay is needed. - */ - -/* - * Flash configuration - */ -#define CONFIG_SYS_FLASH_CFI 1 -#define CONFIG_FLASH_CFI_DRIVER 1 -#define CONFIG_FLASH_16BIT -#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT -#define CONFIG_SYS_FLASH_CFI_AMD_RESET -#define CONFIG_SYS_FLASH_EMPTY_INFO - -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of memory banks */ -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } -#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 /* Erase Timeout (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Write Timeout (in ms) */ -/* Timeout for Flash Clear Lock Bits (in ms) */ -#define CONFIG_SYS_FLASH_UNLOCK_TOUT 10000 -/* "Real" (hardware) sectors protection */ -#define CONFIG_SYS_FLASH_PROTECTION - -/* - * Environment settings - */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_SIZE 0x20000 -#define CONFIG_ENV_SECT_SIZE 0x20000 -#define CONFIG_ENV_OVERWRITE 1 -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x00040000) - -/* - * Memory map - */ -#define CONFIG_SYS_MBAR 0xF0000000 -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_DEFAULT_MBAR 0x80000000 - -/* Use SRAM until RAM will be available */ -#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM -#ifdef CONFIG_POST -/* preserve space for the post_word at end of on-chip SRAM */ -#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_POST_SIZE -#else -/* End of used area in DPRAM */ -#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE -#endif - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* 192 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* 128 kB for malloc() */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial map for Linux */ - -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -#define CONFIG_SYS_RAMBOOT 1 -#endif - -/* - * Ethernet configuration - */ -#define CONFIG_MPC5xxx_FEC -#define CONFIG_MPC5xxx_FEC_MII100 -#define CONFIG_PHY_ADDR 0x00 -#define CONFIG_RESET_PHY_R - -/* - * GPIO configuration - */ -#define CONFIG_SYS_GPIO_DATADIR 0x00000064 /* PSC1_2, PSC2_1,2 output */ -#define CONFIG_SYS_GPIO_OPENDRAIN 0x00000000 /* No open drain */ -#define CONFIG_SYS_GPIO_DATAVALUE 0x00000000 /* PSC1_1 to 1, rest to 0 */ -#define CONFIG_SYS_GPIO_ENABLE 0x00000064 /* PSC1_2, PSC2_1,2 enable */ - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_CMDLINE_EDITING - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ - sizeof(CONFIG_SYS_PROMPT) + 16) -/* max number of command args */ -#define CONFIG_SYS_MAXARGS 16 -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE - -/* default load address */ -#define CONFIG_SYS_LOAD_ADDR 0x100000 - -/* decrementer freq: 1 ms ticks */ - -/* - * Various low-level settings - */ -#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI -#define CONFIG_SYS_HID0_FINAL HID0_ICE - -#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE -#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE - -#define CONFIG_BOARD_EARLY_INIT_R - -#define CONFIG_SYS_CS_BURST 0x00000000 -#define CONFIG_SYS_CS_DEADCYCLE 0x33333333 - -/* - * DT support - */ -#define OF_CPU "PowerPC,5200@0" -#define OF_SOC "soc5200@f0000000" -#define OF_TBCLK (bd->bi_busfreq / 4) - -#endif /* __O2D_CONFIG_H */ diff --git a/include/configs/o2dnt2.h b/include/configs/o2dnt2.h deleted file mode 100644 index 00a8d9618d..0000000000 --- a/include/configs/o2dnt2.h +++ /dev/null @@ -1,66 +0,0 @@ -/* - * (C) Copyright 2012 - * DENX Software Engineering, Anatolij Gustschin agust@denx.de - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Valid values for CONFIG_SYS_TEXT_BASE are: - * 0xFC000000 boot low boot high (standard configuration) - * 0x00100000 boot from RAM (for testing only) - */ -#ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xfc000000 /* Standard: boot low */ -#endif - -/* Board specific flash config */ -#define CONFIG_SYS_FLASH_BASE 0xfc000000 -#define CONFIG_SYS_FLASH_SIZE 0x04000000 /* maximum 64MB */ -/* max number of sectors on one chip */ -#define CONFIG_SYS_MAX_FLASH_SECT 512 - -/* - * Include common defines for all ifm boards - */ -#include "o2dnt-common.h" - -/* - * GPIO configuration: - * CS1 SDRAM activate + no CAN + no PCI - */ -#define CONFIG_SYS_GPS_PORT_CONFIG 0x8000A004 - -/* Other board specific configs */ -#define CONFIG_SYS_BOOTCS_CFG 0x00057d01 -#define CONFIG_SYS_RESET_ADDRESS 0xfc000000 - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x07f00000 /* 1 - 127 MB in DRAM */ - -#define CONFIG_BOARD_NAME "o2dnt2" -#define CONFIG_BOARD_BOOTCMD "run flash_self" -#define CONFIG_BOARD_MEM_LIMIT __stringify(126) -#define BOARD_POST_CRC32_END __stringify(0x01000000) - -#define CONFIG_EXTRA_ENV_SETTINGS \ - CONFIG_IFM_DEFAULT_ENV_SETTINGS \ - CONFIG_IFM_DEFAULT_ENV_OLD \ - CONFIG_IFM_DEFAULT_ENV_NEW \ - "linbot=fc060000\0" \ - "lintop=fc15ffff\0" \ - "rambot=fc160000\0" \ - "ramtop=fc55ffff\0" \ - "jffbot=fc560000\0" \ - "jfftop=fce5ffff\0" \ - "ubobot=" __stringify(CONFIG_SYS_FLASH_BASE) "\0" \ - "ubotop=fc03ffff\0" \ - "calname="CONFIG_BOARD_NAME"/uCal_"CONFIG_BOARD_NAME"_act\0" \ - "calbot=fce60000\0" \ - "caltop=fcffffff\0" \ - "progCal=tftp 200000 ${calname};erase ${calbot} ${caltop};" \ - "cp.b ${fileaddr} ${calbot} ${filesize}\0" \ - "kernel_addr=0xfc060000\0" \ - "ramdisk_addr=0xfc160000\0" \ - "master=mw f0000b00 0x8005A006;mw f0000b0c ${IOpin};" \ - "mw f0000b04 ${IOpin};mw f0000b10 0x20\0" diff --git a/include/configs/o2i.h b/include/configs/o2i.h deleted file mode 100644 index c0fcedaf10..0000000000 --- a/include/configs/o2i.h +++ /dev/null @@ -1,66 +0,0 @@ -/* - * (C) Copyright 2012 - * DENX Software Engineering, Anatolij Gustschin agust@denx.de - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Valid values for CONFIG_SYS_TEXT_BASE are: - * 0xFF000000 boot low boot high (standard configuration) - * 0x00100000 boot from RAM (for testing only) - */ -#ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xff000000 /* Standard: boot low */ -#endif - -/* Board specific flash config */ -#define CONFIG_SYS_FLASH_BASE 0xff000000 -#define CONFIG_SYS_FLASH_SIZE 0x01000000 /* maximum 16MB */ -/* max number of sectors on one chip */ -#define CONFIG_SYS_MAX_FLASH_SECT 128 - -/* - * Include common defines for all ifm boards - */ -#include "o2dnt-common.h" - -/* GPIO configuration */ -#define CONFIG_SYS_GPS_PORT_CONFIG 0x00002006 /* no CAN */ - -/* Other board specific configs */ -#define CONFIG_SYS_BOOTCS_CFG 0x00087801 -#define CONFIG_SYS_RESET_ADDRESS 0xff000000 - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x03f00000 /* 1 - 63 MB in DRAM */ - -#define CONFIG_BOARD_NAME "o2i" -#define CONFIG_BOARD_BOOTCMD "run dhcp_boot" -#define CONFIG_BOARD_MEM_LIMIT __stringify(62) -#define BOARD_POST_CRC32_END __stringify(0x01000000) - -#define CONFIG_EXTRA_ENV_SETTINGS \ - CONFIG_IFM_DEFAULT_ENV_SETTINGS \ - CONFIG_IFM_DEFAULT_ENV_OLD \ - CONFIG_IFM_DEFAULT_ENV_NEW \ - "linbot=ff060000\0" \ - "lintop=ff15ffff\0" \ - "rambot=ff160000\0" \ - "ramtop=ff55ffff\0" \ - "jffbot=ff560000\0" \ - "jfftop=ffebffff\0" \ - "kernel_addr=0xff060000\0" \ - "ramdisk_addr=0xff160000\0" \ - "ubobot=" __stringify(CONFIG_SYS_FLASH_BASE) "\0" \ - "ubotop=ff03ffff\0" \ - "autoload=no\0" \ - "dhcp_boot=run dhcpcmd; run flash_mtd\0" \ - "hostname=IFM_SENSOR\0" \ - "flash_mtd=run mtd_args addip addmem;bootm ${kernel_addr}\0" \ - "mtd_args=setenv bootargs root=/dev/mtdblock3 " \ - "rw rootfstype=cramfs\0" \ - "sensorType=O2I100AA\0" \ - "netretry=once\0" \ - "master=mw f0000b00 0x00052006;mw f0000b0c ${IOpin};" \ - "mw f0000b04 ${IOpin};mw f0000b10 0x20\0" diff --git a/include/configs/o2mnt.h b/include/configs/o2mnt.h deleted file mode 100644 index eb63cb0c85..0000000000 --- a/include/configs/o2mnt.h +++ /dev/null @@ -1,74 +0,0 @@ -/* - * (C) Copyright 2012 - * DENX Software Engineering, Anatolij Gustschin agust@denx.de - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Valid values for CONFIG_SYS_TEXT_BASE are: - * 0xFF000000 boot low boot high (standard configuration) - * 0x00100000 boot from RAM (for testing only) - */ -#ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xff000000 /* Standard: boot low */ -#endif - -/* Board specific flash config */ -#define CONFIG_SYS_FLASH_BASE 0xff000000 -#define CONFIG_SYS_FLASH_SIZE 0x01000000 /* maximum 16MB */ -/* max number of sectors on one chip */ -#define CONFIG_SYS_MAX_FLASH_SECT 128 - -/* - * Include common defines for all ifm boards - */ -#include "o2dnt-common.h" - -/* GPIO configuration */ -#define CONFIG_SYS_GPS_PORT_CONFIG 0x00002004 /* no CAN */ - -/* Other board specific configs */ -#define CONFIG_NETCONSOLE - -#define CONFIG_SYS_BOOTCS_CFG 0x00087801 -#define CONFIG_SYS_RESET_ADDRESS 0xff000000 - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x03f00000 /* 1 - 63 MB in DRAM */ - -#define CONFIG_BOARD_NAME "o2mnt" -#define CONFIG_BOARD_BOOTCMD "${newcmd}" -#define CONFIG_BOARD_MEM_LIMIT __stringify(62) -#define BOARD_POST_CRC32_END __stringify(0x01000000) - -#ifndef CONFIG_IFM_SENSOR_TYPE -#define CONFIG_IFM_SENSOR_TYPE "O2M110" -#endif - -#define CONFIG_EXTRA_ENV_SETTINGS \ - CONFIG_IFM_DEFAULT_ENV_SETTINGS \ - CONFIG_IFM_DEFAULT_ENV_OLD \ - CONFIG_IFM_DEFAULT_ENV_NEW \ - "linbot=ff060000\0" \ - "lintop=ff25ffff\0" \ - "rambot=ff260000\0" \ - "ramtop=ffc5ffff\0" \ - "jffbot=ffc60000\0" \ - "jfftop=ffffffff\0" \ - "ubobot=" __stringify(CONFIG_SYS_FLASH_BASE) "\0" \ - "ubotop=ff03ffff\0" \ - "kernel_addr=0xff060000\0" \ - "ramdisk_addr=0xff260000\0" \ - "newcmd=run scrprot;run flash_ext2\0" \ - "scrprot=protect on ${linbot} ${lintop};protect on ${rambot} " \ - "${ramtop}\0" \ - "flash_ext2=run ext2args addip addmem;bootm ${kernel_addr}\0" \ - "ext2args=setenv bootargs root=/dev/mtdblock3 ro " \ - "rootfstype=ext2\0" \ - "pwm=mw f0000674 0x10006;mw f0000678 0x30000;" \ - "mw f0000678 0x30001;mw f0000670 0x3\0" \ - "master=mw f0000b00 0x00052006;mw f0000b0c $(IOpin);" \ - "mw f0000b04 $(IOpin);mw f0000b10 0x24;run pwm\0" \ - "sensortyp="CONFIG_IFM_SENSOR_TYPE"\0" \ - "srelease=0.00\0" diff --git a/include/configs/o3dnt.h b/include/configs/o3dnt.h deleted file mode 100644 index f0fcedaffc..0000000000 --- a/include/configs/o3dnt.h +++ /dev/null @@ -1,69 +0,0 @@ -/* - * (C) Copyright 2012 - * DENX Software Engineering, Anatolij Gustschin agust@denx.de - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Valid values for CONFIG_SYS_TEXT_BASE are: - * 0xFC000000 boot low boot high (standard configuration) - * 0x00100000 boot from RAM (for testing only) - */ -#ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xfc000000 /* Standard: boot low */ -#endif - -/* Board specific flash config */ -#define CONFIG_SYS_FLASH_BASE 0xfc000000 -#define CONFIG_SYS_FLASH_SIZE 0x04000000 /* maximum 64MB */ -/* max number of sectors on one chip */ -#define CONFIG_SYS_MAX_FLASH_SECT 512 - -/* - * Include common defines for all ifm boards - */ -#include "o2dnt-common.h" - -/* Additional commands */ -#define CONFIG_CMD_REGINFO - -/* - * GPIO configuration: - * no CAN + no PCI - */ -#define CONFIG_SYS_GPS_PORT_CONFIG 0x0000A000 - -/* Other board specific configs */ -#define CONFIG_SYS_BOOTCS_CFG 0x00057d01 -#define CONFIG_SYS_RESET_ADDRESS 0xfc000000 - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x03f00000 /* 1 - 63 MB in DRAM */ - -#define CONFIG_BOARD_NAME "o3dnt" -#define CONFIG_BOARD_BOOTCMD "run flash_self" -#define CONFIG_BOARD_MEM_LIMIT __stringify(62) -#define BOARD_POST_CRC32_END __stringify(0x01000000) - -#define CONFIG_EXTRA_ENV_SETTINGS \ - CONFIG_IFM_DEFAULT_ENV_SETTINGS \ - CONFIG_IFM_DEFAULT_ENV_OLD \ - CONFIG_IFM_DEFAULT_ENV_NEW \ - "linbot=fc060000\0" \ - "lintop=fc15ffff\0" \ - "rambot=fc160000\0" \ - "ramtop=fc55ffff\0" \ - "jffbot=fc560000\0" \ - "jfftop=fce5ffff\0" \ - "ubobot=" __stringify(CONFIG_SYS_FLASH_BASE) "\0" \ - "ubotop=fc03ffff\0" \ - "calname="CONFIG_BOARD_NAME"/uCal_"CONFIG_BOARD_NAME"_act\0" \ - "calbot=fce60000\0" \ - "caltop=fcffffff\0" \ - "progCal=tftp 200000 ${calname};erase ${calbot} ${caltop};" \ - "cp.b ${fileaddr} ${calbot} ${filesize}\0" \ - "kernel_addr=0xfc060000\0" \ - "ramdisk_addr=0xfc160000\0" \ - "master=mw f0000b00 0x0005A006;mw f0000b0c ${IOpin};" \ - "mw f0000b04 ${IOpin};mw f0000b10 0x20\0" diff --git a/include/configs/pcm030.h b/include/configs/pcm030.h deleted file mode 100644 index 6da17be11c..0000000000 --- a/include/configs/pcm030.h +++ /dev/null @@ -1,378 +0,0 @@ -/* - * (C) Copyright 2003-2005 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * (C) Copyright 2006 - * Eric Schumann, Phytec Messatechnik GmbH - * - * (C) Copyright 2009 - * Jon Smirl jonsmirl@gmail.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_BOARDINFO "phyCORE-MPC5200B-tiny" - -/*----------------------------------------------------------------------------- -High Level Configuration Options -(easy to change) ------------------------------------------------------------------------------*/ -#define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */ -#define CONFIG_MPC5200_DDR 1 /* (with DDR-SDRAM) */ -#define CONFIG_PHYCORE_MPC5200B_TINY 1 /* phyCORE-MPC5200B -> */ - /* FEC configuration and IDE */ - -/* - * Valid values for CONFIG_SYS_TEXT_BASE are: - * 0xFFF00000 boot high (standard configuration) - * 0xFF000000 boot low - * 0x00100000 boot from RAM (for testing only) - */ -#ifndef CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_TEXT_BASE 0xFFF00000 -#endif - -#define CONFIG_SYS_MPC5XXX_CLKIN 33333333 /* ... running at 33.333333MHz */ - -/*----------------------------------------------------------------------------- -Serial console configuration ------------------------------------------------------------------------------*/ -#define CONFIG_PSC_CONSOLE 3 /* console is on PSC3 -> */ - /*define gps port conf. */ - /* register later on to */ - /*enable UART function! */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } - -/* - * Command line configuration. - */ -#define CONFIG_CMD_PCI - -#define CONFIG_TIMESTAMP 1 /* Print image info with timestamp */ - -#if (CONFIG_SYS_TEXT_BASE == 0xFF000000) /* Boot low */ -#define CONFIG_SYS_LOWBOOT 1 -#endif -/* RAMBOOT will be defined automatically in memory section */ - -#define CONFIG_JFFS2_CMDLINE -#define MTDIDS_DEFAULT "nor0=physmap-flash.0" -#define MTDPARTS_DEFAULT "mtdparts=physmap-flash.0:256k(ubootl)," \ - "1792k(kernel),13312k(jffs2),256k(uboot)ro,256k(oftree),-(space)" - -#undef CONFIG_BOOTARGS - -#define CONFIG_PREBOOT "echo;" \ - "echo Type "run bootcmd_net" to load Kernel over TFTP and to "\ - "mount root filesystem over NFS;" \ - "echo" - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "netdev=eth0\0" \ - "uimage=uImage-pcm030\0" \ - "oftree=oftree-pcm030.dtb\0" \ - "jffs2=root-pcm030.jffs2\0" \ - "uboot=u-boot-pcm030.bin\0" \ - "bargs_base=setenv bootargs console=ttyPSC0,$(baudrate)" \ - " $(mtdparts) rw\0" \ - "bargs_flash=setenv bootargs $(bootargs) root=/dev/mtdblock2" \ - " rootfstype=jffs2\0" \ - "bargs_nfs=setenv bootargs $(bootargs) root=/dev/nfs" \ - " ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)::" \ - "$(netdev):off nfsroot=$(serverip):$(nfsrootfs),v3,tcp\0" \ - "bcmd_net=run bargs_base bargs_nfs; tftpboot 0x500000 $(uimage);" \ - " tftp 0x400000 $(oftree); bootm 0x500000 - 0x400000\0" \ - "bcmd_flash=run bargs_base bargs_flash; bootm 0xff040000 - " \ - "0xfff40000\0" \ - " cp.b 0x400000 0xff040000 $(filesize)\0" \ - "prg_jffs2=tftp 0x400000 $(jffs2); erase 0xff200000 0xffefffff; " \ - "cp.b 0x400000 0xff200000 $(filesize)\0" \ - "prg_oftree=tftp 0x400000 $(oftree); erase 0xfff40000 0xfff5ffff;" \ - " cp.b 0x400000 0xfff40000 $(filesize)\0" \ - "update=tftpboot 0x400000 $(uboot);erase 0xFFF00000 0xfff3ffff;" \ - " cp.b 0x400000 0xFFF00000 $(filesize)\0" \ - "unlock=yes\0" \ - "" - -#define CONFIG_BOOTCOMMAND "run bcmd_flash" - -/*-------------------------------------------------------------------------- -IPB Bus clocking configuration. - ---------------------------------------------------------------------------*/ -#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ - -/*------------------------------------------------------------------------- - * PCI Mapping: - * 0x40000000 - 0x4fffffff - PCI Memory - * 0x50000000 - 0x50ffffff - PCI IO Space - * -----------------------------------------------------------------------*/ -#define CONFIG_PCI_SCAN_SHOW 1 -#define CONFIG_PCI_MEM_BUS 0x40000000 -#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS -#define CONFIG_PCI_MEM_SIZE 0x10000000 -#define CONFIG_PCI_IO_BUS 0x50000000 -#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS -#define CONFIG_PCI_IO_SIZE 0x01000000 -#define CONFIG_SYS_XLB_PIPELINING 1 - -/*--------------------------------------------------------------------------- - Flash configuration ----------------------------------------------------------------------------*/ - -#define CONFIG_SYS_FLASH_BASE 0xff000000 -#define CONFIG_SYS_FLASH_SIZE 0x01000000 -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } - -#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */ -#define CONFIG_FLASH_CFI_DRIVER 1 /* Use the common driver */ -#define CONFIG_SYS_FLASH_EMPTY_INFO -#define CONFIG_SYS_MAX_FLASH_SECT 260 /* max num of sects on one chip */ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */ - /* (= chip selects) */ -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE - -/* - * Use also hardware protection. This seems required, as the BDI uses - * hardware protection. Without this, U-Boot can't work with this sectors, - * as its protection is software only by default - */ -#define CONFIG_SYS_FLASH_PROTECTION 1 - -/*--------------------------------------------------------------------------- - Environment settings ----------------------------------------------------------------------------*/ - -#define CONFIG_ENV_IS_NOWHERE -#define CONFIG_ENV_OFFSET 0x00 /* environment starts at the */ - /*beginning of the EEPROM */ -#define CONFIG_ENV_SIZE 2048 - -#define CONFIG_ENV_OVERWRITE 1 - -/*----------------------------------------------------------------------------- - Memory map ------------------------------------------------------------------------------*/ -#define CONFIG_SYS_MBAR 0xF0000000 /* MBAR has to be switched by other */ - /* bootloader or debugger config */ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_DEFAULT_MBAR 0x80000000 -/* Use SRAM until RAM will be available */ -#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM -#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE /* Size of used */ - /* area in DPRAM */ -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -# define CONFIG_SYS_RAMBOOT 1 -#endif - -#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -/*----------------------------------------------------------------------------- - Ethernet configuration ------------------------------------------------------------------------------*/ -#define CONFIG_MPC5xxx_FEC 1 -#define CONFIG_MPC5xxx_FEC_MII100 -#define CONFIG_PHY_ADDR 0x01 - -/*--------------------------------------------------------------------------- - GPIO configuration - ---------------------------------------------------------------------------*/ - -/* GPIO port configuration - * - * Pin mapping: - * - * [29:31] = 01x - * PSC1_0 -> AC97 SDATA out - * PSC1_1 -> AC97 SDTA in - * PSC1_2 -> AC97 SYNC out - * PSC1_3 -> AC97 bitclock out - * PSC1_4 -> AC97 reset out - * - * [25:27] = 001 - * PSC2_0 -> CAN 1 Tx out - * PSC2_1 -> CAN 1 Rx in - * PSC2_2 -> CAN 2 Tx out - * PSC2_3 -> CAN 2 Rx in - * PSC2_4 -> GPIO (claimed for ATA reset, active low) - * - * - * [20:23] = 1100 - * PSC3_0 -> UART Tx out - * PSC3_1 -> UART Rx in - * PSC3_2 -> UART RTS (in/out FIXME) - * PSC3_3 -> UART CTS (in/out FIXME) - * PSC3_4 -> LocalPlus Bus CS6 \ - * PSC3_5 -> LocalPlus Bus CS7 / --> see [4] and [5] - * PSC3_6 -> dedicated SPI MOSI out (master case) - * PSC3_7 -> dedicated SPI MISO in (master case) - * PSC3_8 -> dedicated SPI SS out (master case) - * PSC3_9 -> dedicated SPI CLK out (master case) - * - * [18:19] = 01 - * USB_0 -> USB OE out - * USB_1 -> USB Tx- out - * USB_2 -> USB Tx+ out - * USB_3 -> USB RxD (in/out FIXME) - * USB_4 -> USB Rx+ in - * USB_5 -> USB Rx- in - * USB_6 -> USB PortPower out - * USB_7 -> USB speed out - * USB_8 -> USB suspend (in/out FIXME) - * USB_9 -> USB overcurrent in - * - * [17] = 0 - * USB differential mode - * - * [16] = 0 - * PCI enabled - * - * [12:15] = 0101 - * ETH_0 -> ETH Txen - * ETH_1 -> ETH TxD0 - * ETH_2 -> ETH TxD1 - * ETH_3 -> ETH TxD2 - * ETH_4 -> ETH TxD3 - * ETH_5 -> ETH Txerr - * ETH_6 -> ETH MDC - * ETH_7 -> ETH MDIO - * ETH_8 -> ETH RxDv - * ETH_9 -> ETH RxCLK - * ETH_10 -> ETH Collision - * ETH_11 -> ETH TxD - * ETH_12 -> ETH RxD0 - * ETH_13 -> ETH RxD1 - * ETH_14 -> ETH RxD2 - * ETH_15 -> ETH RxD3 - * ETH_16 -> ETH Rxerr - * ETH_17 -> ETH CRS - * - * [9:11] = 101 - * PSC6_0 -> UART RxD in - * PSC6_1 -> UART CTS (in/out FIXME) - * PSC6_2 -> UART TxD out - * PSC6_3 -> UART RTS (in/out FIXME) - * - * [2:3/6:7] = 00/11 - * TMR_0 -> ATA_CS0 out - * TMR_1 -> ATA_CS1 out - * TMR_2 -> GPIO - * TMR_3 -> GPIO - * TMR_4 -> GPIO - * TMR_5 -> GPIO - * TMR_6 -> GPIO - * TMR_7 -> GPIO - * I2C_0 -> I2C 1 Clock out - * I2C_1 -> I2C 1 IO in/out - * I2C_2 -> I2C 2 Clock out - * I2C_3 -> I2C 2 IO in/out - * - * [4] = 1 - * PSC3_5 is used as CS7 - * - * [5] = 1 - * PSC3_4 is used as CS6 - * - * [1] = 0 - * gpio_wkup_7 is GPIO - * - * [0] = 0 - * gpio_wkup_6 is GPIO - * - */ -#define CONFIG_SYS_GPS_PORT_CONFIG 0x0f551c12 - -/*----------------------------------------------------------------------------- - Miscellaneous configurable options --------------------------------------------------------------------------------*/ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ - -#define CONFIG_CMDLINE_EDITING 1 /* add command line history */ - -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) - /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x400000 /* default load address */ - -/*----------------------------------------------------------------------------- - Various low-level settings ------------------------------------------------------------------------------*/ -#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI -#define CONFIG_SYS_HID0_FINAL HID0_ICE - -/* no burst access on the LPB */ -#define CONFIG_SYS_CS_BURST 0x00000000 -/* one deadcycle for the 33MHz statemachine */ -#define CONFIG_SYS_CS_DEADCYCLE 0x33333331 -/* one additional waitstate for the 33MHz statemachine */ -#define CONFIG_SYS_BOOTCS_CFG 0x0001dd00 -#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE - -#define CONFIG_SYS_RESET_ADDRESS 0xff000000 - -/*----------------------------------------------------------------------- - * USB stuff - *----------------------------------------------------------------------- - */ -#define CONFIG_USB_CLOCK 0x0001BBBB -#define CONFIG_USB_CONFIG 0x00001000 - -/*--------------------------------------------------------------------------- - IDE/ATA stuff Supports IDE harddisk -----------------------------------------------------------------------------*/ - -#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */ -#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ -#undef CONFIG_IDE_LED /* LED for ide not supported */ -#define CONFIG_SYS_ATA_CS_ON_TIMER01 -#define CONFIG_IDE_RESET 1 /* reset for ide supported */ -#define CONFIG_IDE_PREINIT -#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ -#define CONFIG_SYS_IDE_MAXDEVICE 2 /* max. 2 drives per IDE bus */ -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 -#define CONFIG_SYS_ATA_BASE_ADDR MPC5XXX_ATA -/* Offset for data I/O */ -#define CONFIG_SYS_ATA_DATA_OFFSET (0x0060) -/* Offset for normal register accesses */ -#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET) -/* Offset for alternate registers */ -#define CONFIG_SYS_ATA_ALT_OFFSET (0x005C) -/* Interval between registers */ -#define CONFIG_SYS_ATA_STRIDE 4 -#define CONFIG_ATAPI 1 - -/* USB */ -#define CONFIG_USB_OHCI - -/* pass open firmware flat tree */ -#define OF_CPU "PowerPC,5200@0" -#define OF_TBCLK CONFIG_SYS_MPC5XXX_CLKIN -#define OF_SOC "soc5200@f0000000" -#define OF_STDOUT_PATH "/soc5200@f0000000/serial@2400" - -#endif /* __CONFIG_H */ diff --git a/include/configs/pdm360ng.h b/include/configs/pdm360ng.h deleted file mode 100644 index 676d55f5e8..0000000000 --- a/include/configs/pdm360ng.h +++ /dev/null @@ -1,420 +0,0 @@ -/* - * (C) Copyright 2009-2010 - * Michael Weiß, ifm ecomatic gmbh, michael.weiss@ifm.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * pdm360ng board configuration file - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -#define CONFIG_PDM360NG 1 - -/* - * Memory map for the PDM360NG board: - * - * 0x0000_0000 - 0x1FFF_FFFF DDR RAM (512 MB) - * 0x2000_0000 - 0x3FFF_FFFF reserved (DDR RAM (512 MB) - * 0x5000_0000 - 0x5001_FFFF SRAM (128 KB) - * 0x5004_0000 - 0x5005_FFFF MRAM (CS2) (128 KB) - * 0x8000_0000 - 0x803F_FFFF IMMR (4 MB) - * 0xF000_0000 - 0xF7FF_FFFF NOR FLASH (CS0) (128 MB) - * 0xF800_0000 - 0xFFFF_FFFF NOR FLASH (CS1) (128 MB) optional - */ - -/* - * High Level Configuration Options - */ -#define CONFIG_E300 1 /* E300 Family */ -#define CONFIG_FSL_DIU_FB 1 /* FSL DIU */ - -#define CONFIG_SYS_TEXT_BASE 0xF0000000 - -/* Used for silent command in environment */ -#define CONFIG_SYS_DEVICE_NULLDEV - -/* Video */ - -#if defined(CONFIG_VIDEO) -#define CONFIG_SPLASH_SCREEN -#define CONFIG_VIDEO_LOGO -#define CONFIG_VIDEO_BMP_RLE8 -#endif - -#define CONFIG_SYS_MPC512X_CLKIN 33333333 /* in Hz */ - -#define CONFIG_MISC_INIT_R - -#define CONFIG_SYS_IMMR 0x80000000 -#define CONFIG_SYS_DIU_ADDR ((CONFIG_SYS_IMMR) + 0x2100) - -/* - * DDR Setup - */ - -/* DDR is system memory */ -#define CONFIG_SYS_DDR_BASE 0x00000000 -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE -#define CONFIG_SYS_MAX_RAM_SIZE 0x40000000 - -/* DDR pin mux and slew rate */ -#define CONFIG_SYS_IOCTRL_MUX_DDR 0x00000012 - -/* Manually set all parameters as there's no SPD etc. */ -/* - * DDR Controller Configuration for Micron DDR2 SDRAM MT47H128M8-3 - * - * SYS_CFG: - * [31:31] MDDRC Soft Reset: Diabled - * [30:30] DRAM CKE pin: Enabled - * [29:29] DRAM CLK: Enabled - * [28:28] Command Mode: Enabled (For initialization only) - * [27:25] DRAM Row Select: dram_row[15:0] = magenta_address[25:10] - * [24:21] DRAM Bank Select: dram_bank[1:0] = magenta_address[11:10] - * [20:19] Read Test: DON'T USE - * [18:18] Self Refresh: Enabled - * [17:17] 16bit Mode: Disabled - * [16:13] Read Delay: 3 - * [12:12] Half DQS Delay: Disabled - * [11:11] Quarter DQS Delay: Disabled - * [10:08] Write Delay: 2 - * [07:07] Early ODT: Disabled - * [06:06] On DIE Termination: Enabled - * [05:05] FIFO Overflow Clear: DON'T USE here - * [04:04] FIFO Underflow Clear: DON'T USE here - * [03:03] FIFO Overflow Pending: DON'T USE here - * [02:02] FIFO Underlfow Pending: DON'T USE here - * [01:01] FIFO Overlfow Enabled: Enabled - * [00:00] FIFO Underflow Enabled: Enabled - * TIME_CFG0 - * [31:16] DRAM Refresh Time: 0 CSB clocks - * [15:8] DRAM Command Time: 0 CSB clocks - * [07:00] DRAM Precharge Time: 0 CSB clocks - * TIME_CFG1 - * [31:26] DRAM tRFC: - * [25:21] DRAM tWR1: - * [20:17] DRAM tWRT1: - * [16:11] DRAM tDRR: - * [10:05] DRAM tRC: - * [04:00] DRAM tRAS: - * TIME_CFG2 - * [31:28] DRAM tRCD: - * [27:23] DRAM tFAW: - * [22:19] DRAM tRTW1: - * [18:15] DRAM tCCD: - * [14:10] DRAM tRTP: - * [09:05] DRAM tRP: - * [04:00] DRAM tRPA - */ -#define CONFIG_SYS_MDDRC_SYS_CFG 0xEA804A40 -#define CONFIG_SYS_MDDRC_TIME_CFG0 0x030C3D2E -#define CONFIG_SYS_MDDRC_TIME_CFG1 0x68EC1168 -#define CONFIG_SYS_MDDRC_TIME_CFG2 0x34310864 - -/* - * Alternative 1: small RAM (128 MB) configuration - */ -#define CONFIG_SYS_MDDRC_SYS_CFG_ALT1 0xE8604A40 -#define CONFIG_SYS_MDDRC_TIME_CFG0_ALT1 0x030C3D2E -#define CONFIG_SYS_MDDRC_TIME_CFG1_ALT1 0x3CEC1168 -#define CONFIG_SYS_MDDRC_TIME_CFG2_ALT1 0x33310863 - -#define CONFIG_SYS_MDDRC_SYS_CFG_EN 0xF0000000 - -#define CONFIG_SYS_DDRCMD_NOP 0x01380000 -#define CONFIG_SYS_DDRCMD_PCHG_ALL 0x01100400 -#define CONFIG_SYS_DDRCMD_EM2 0x01020000 /* EMR2 */ -#define CONFIG_SYS_DDRCMD_EM3 0x01030000 /* EMR3 */ -/* EMR with 150 ohm ODT todo: verify */ -#define CONFIG_SYS_DDRCMD_EN_DLL 0x01010040 -#define CONFIG_SYS_DDRCMD_RES_DLL 0x01000100 -#define CONFIG_SYS_DDRCMD_RFSH 0x01080000 -#define CONFIG_SYS_MICRON_INIT_DEV_OP 0x01000432 -/* EMR with 150 ohm ODT todo: verify */ -#define CONFIG_SYS_DDRCMD_OCD_DEFAULT 0x010107C0 -/* EMR new command with 150 ohm ODT todo: verify */ -#define CONFIG_SYS_DDRCMD_OCD_EXIT 0x01010440 - -/* DDR Priority Manager Configuration */ -#define CONFIG_SYS_MDDRCGRP_PM_CFG1 0x00077777 -#define CONFIG_SYS_MDDRCGRP_PM_CFG2 0x00000000 -#define CONFIG_SYS_MDDRCGRP_HIPRIO_CFG 0x00000001 -#define CONFIG_SYS_MDDRCGRP_LUT0_MU 0xFFEEDDCC -#define CONFIG_SYS_MDDRCGRP_LUT0_ML 0xBBAAAAAA -#define CONFIG_SYS_MDDRCGRP_LUT1_MU 0x66666666 -#define CONFIG_SYS_MDDRCGRP_LUT1_ML 0x55555555 -#define CONFIG_SYS_MDDRCGRP_LUT2_MU 0x44444444 -#define CONFIG_SYS_MDDRCGRP_LUT2_ML 0x44444444 -#define CONFIG_SYS_MDDRCGRP_LUT3_MU 0x55555555 -#define CONFIG_SYS_MDDRCGRP_LUT3_ML 0x55555558 -#define CONFIG_SYS_MDDRCGRP_LUT4_MU 0x11111111 -#define CONFIG_SYS_MDDRCGRP_LUT4_ML 0x11111122 -#define CONFIG_SYS_MDDRCGRP_LUT0_AU 0xaaaaaaaa -#define CONFIG_SYS_MDDRCGRP_LUT0_AL 0xaaaaaaaa -#define CONFIG_SYS_MDDRCGRP_LUT1_AU 0x66666666 -#define CONFIG_SYS_MDDRCGRP_LUT1_AL 0x66666666 -#define CONFIG_SYS_MDDRCGRP_LUT2_AU 0x11111111 -#define CONFIG_SYS_MDDRCGRP_LUT2_AL 0x11111111 -#define CONFIG_SYS_MDDRCGRP_LUT3_AU 0x11111111 -#define CONFIG_SYS_MDDRCGRP_LUT3_AL 0x11111111 -#define CONFIG_SYS_MDDRCGRP_LUT4_AU 0x11111111 -#define CONFIG_SYS_MDDRCGRP_LUT4_AL 0x11111111 - -/* - * NOR FLASH on the Local Bus - */ -#define CONFIG_SYS_FLASH_CFI /* use Common Flash Interface */ -#define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */ -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE - -#define CONFIG_SYS_FLASH_BASE 0xF0000000 /* start of FLASH-Bank0 */ -#define CONFIG_SYS_FLASH_SIZE 0x08000000 /* max size of a Bank */ -/* start of FLASH-Bank1 */ -#define CONFIG_SYS_FLASH1_BASE (CONFIG_SYS_FLASH_BASE + \ - CONFIG_SYS_FLASH_SIZE) -#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max sectors per device */ -#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ -#define CONFIG_SYS_FLASH_BANKS_LIST \ - {CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH1_BASE} - -#define CONFIG_SYS_SRAM_BASE 0x50000000 -#define CONFIG_SYS_SRAM_SIZE 0x00020000 /* 128 KB */ - -#define CONFIG_SYS_CS1_START CONFIG_SYS_FLASH1_BASE -#define CONFIG_SYS_CS1_SIZE CONFIG_SYS_FLASH_SIZE - -/* ALE active low, data size 4 bytes */ -#define CONFIG_SYS_CS0_CFG 0x05059350 -/* ALE active low, data size 4 bytes */ -#define CONFIG_SYS_CS1_CFG 0x05059350 - -#define CONFIG_SYS_MRAM_BASE 0x50040000 -#define CONFIG_SYS_MRAM_SIZE 0x00020000 -#define CONFIG_SYS_CS2_START CONFIG_SYS_MRAM_BASE -#define CONFIG_SYS_CS2_SIZE CONFIG_SYS_MRAM_SIZE - -/* ALE active low, data size 4 bytes */ -#define CONFIG_SYS_CS2_CFG 0x05059110 - -/* alt. CS timing for CS0, CS1, CS2 */ -#define CONFIG_SYS_CS_ALETIMING 0x00000007 - -/* - * NAND FLASH - */ -#define CONFIG_CMD_NAND /* enable NAND support */ -#define CONFIG_NAND_MPC5121_NFC -#define CONFIG_SYS_NAND_BASE 0x40000000 -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_SELECT_DEVICE /* driver supports mutipl. chips */ - -/* - * Configuration parameters for MPC5121 NAND driver - */ -#define CONFIG_FSL_NFC_WIDTH 1 -#define CONFIG_FSL_NFC_WRITE_SIZE 2048 -#define CONFIG_FSL_NFC_SPARE_SIZE 64 -#define CONFIG_FSL_NFC_CHIPS CONFIG_SYS_MAX_NAND_DEVICE - -/* - * Dynamic MTD partition support - */ -#define CONFIG_CMD_MTDPARTS -#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ -#define CONFIG_FLASH_CFI_MTD -#define MTDIDS_DEFAULT "nor0=f0000000.flash,nor1=f8000000.flash," \ - "nand0=MPC5121 NAND" - -/* - * Flash layout - */ -#define MTDPARTS_DEFAULT "mtdparts=f0000000.flash:512k(u-boot)," \ - "256k(environment1)," \ - "256k(environment2)," \ - "256k(splash-factory)," \ - "2m(FIT: recovery)," \ - "4608k(fs-recovery)," \ - "256k(splash-customer),"\ - "5m(FIT: kernel+dtb)," \ - "64m(rootfs squash)ro," \ - "51m(userfs ubi);" \ - "f8000000.flash:-(unused);" \ - "MPC5121 NAND:1024m(extended-userfs)" - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* Start of monitor */ -#define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* 512 kB for monitor */ -#ifdef CONFIG_FSL_DIU_FB -#define CONFIG_SYS_MALLOC_LEN (6 * 1024 * 1024) /* for malloc */ -#else -#define CONFIG_SYS_MALLOC_LEN (512 * 1024) -#endif - -/* - * Serial Port - */ -#define CONFIG_CONS_INDEX 1 - -/* - * Serial console configuration - */ -#define CONFIG_PSC_CONSOLE 6 /* console is on PSC6 */ -#if CONFIG_PSC_CONSOLE != 6 -#error CONFIG_PSC_CONSOLE must be 6 -#endif - -#define CONSOLE_FIFO_TX_SIZE FIFOC_PSC6_TX_SIZE -#define CONSOLE_FIFO_TX_ADDR FIFOC_PSC6_TX_ADDR -#define CONSOLE_FIFO_RX_SIZE FIFOC_PSC6_RX_SIZE -#define CONSOLE_FIFO_RX_ADDR FIFOC_PSC6_RX_ADDR - -/* - * Clocks in use - */ -#define SCCR1_CLOCKS_EN (CLOCK_SCCR1_CFG_EN | \ - CLOCK_SCCR1_LPC_EN | \ - CLOCK_SCCR1_NFC_EN | \ - CLOCK_SCCR1_PSC_EN(CONFIG_PSC_CONSOLE) | \ - CLOCK_SCCR1_PSCFIFO_EN | \ - CLOCK_SCCR1_DDR_EN | \ - CLOCK_SCCR1_FEC_EN | \ - CLOCK_SCCR1_TPR_EN) - -#define SCCR2_CLOCKS_EN (CLOCK_SCCR2_MEM_EN | \ - CLOCK_SCCR2_SPDIF_EN | \ - CLOCK_SCCR2_DIU_EN | \ - CLOCK_SCCR2_I2C_EN) - -/* - * Used PSC UART devices - */ -#define CONFIG_SYS_PSC1 -#define CONFIG_SYS_PSC4 -#define CONFIG_SYS_PSC6 - -/* - * Co-processor communication parameters - */ -#define CONFIG_SYS_PDM360NG_COPROC_READ_DELAY 5000 -#define CONFIG_SYS_PDM360NG_COPROC_BAUDRATE 38400 - -/* - * IIM - IC Identification Module - */ -#undef CONFIG_FSL_IIM - -/* - * Enabled only to delete "ethaddr" before testing - * "ethaddr" setting from EEPROM - */ -#define CONFIG_ENV_OVERWRITE - -/* - * Ethernet configuration - */ -#define CONFIG_MPC512x_FEC 1 -#define CONFIG_PHY_ADDR 0x1F -#define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_FEC_AN_TIMEOUT 1 -#define CONFIG_HAS_ETH0 - -/* - * Environment - */ -#define CONFIG_ENV_IS_IN_FLASH 1 -/* This has to be a multiple of the Flash sector size */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + \ - CONFIG_SYS_MONITOR_LEN) -#define CONFIG_ENV_SIZE 0x2000 -#define CONFIG_ENV_SECT_SIZE 0x40000 /* one sector (256K) for env */ - -/* Address and size of Redundant Environment Sector */ -#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) -#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - -#define CONFIG_CMD_REGINFO - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ - -#ifdef CONFIG_CMD_KGDB - #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else - #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif - -/* Print Buffer Size */ -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) -/* Max number of command args */ -#define CONFIG_SYS_MAXARGS 16 -/* Boot Argument Buffer Size */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE -/* Decrementer freq: 1ms ticks */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 256 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -/* Initial Memory map for Linux */ -#define CONFIG_SYS_BOOTMAPSZ (256 << 20) - -/* Cache Configuration */ -#define CONFIG_SYS_DCACHE_SIZE 32768 -#define CONFIG_SYS_CACHELINE_SIZE 32 -#ifdef CONFIG_CMD_KGDB -/* log base 2 of the above value */ -#define CONFIG_SYS_CACHELINE_SHIFT 5 -#endif - -#define CONFIG_SYS_HID0_INIT 0x000000000 -#define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | HID0_ICE) -#define CONFIG_SYS_HID2 HID2_HBE - -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ - -#ifdef CONFIG_CMD_KGDB -#define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ -#endif - -/* POST support */ -#define CONFIG_POST (CONFIG_SYS_POST_COPROC) - -/* - * Environment Configuration - */ -#define CONFIG_TIMESTAMP - -#define CONFIG_HOSTNAME pdm360ng -/* default location for tftp and bootm */ -#define CONFIG_LOADADDR 400000 - - -#define CONFIG_PREBOOT "echo;" \ - "echo PDM360NG SAMPLE;" \ - "echo" - -#define CONFIG_BOOTCOMMAND "run env_cont" - -#define CONFIG_OF_SUPPORT_OLD_DEVICE_TREES 1 - -#define OF_CPU "PowerPC,5121@0" -#define OF_SOC_COMPAT "fsl,mpc5121-immr" -#define OF_TBCLK (bd->bi_busfreq / 4) -#define OF_STDOUT_PATH "/soc@80000000/serial@11600" - -/* - * Include common options for all mpc5121 boards - */ -#include "mpc5121-common.h" - -#endif /* __CONFIG_H */ diff --git a/include/configs/v38b.h b/include/configs/v38b.h deleted file mode 100644 index 2bd6cc11ae..0000000000 --- a/include/configs/v38b.h +++ /dev/null @@ -1,284 +0,0 @@ -/* - * (C) Copyright 2003-2006 Wolfgang Denk, DENX Software Engineering, - * wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - * (easy to change) - */ -#define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */ -#define CONFIG_V38B 1 /* ...on V38B board */ - -#define CONFIG_SYS_TEXT_BASE 0xFF000000 - -#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ...running at 33.000000MHz */ - -#define CONFIG_RTC_PCF8563 1 /* has PCF8563 RTC */ -#define CONFIG_MPC5200_DDR 1 /* has DDR SDRAM */ - -#undef CONFIG_HW_WATCHDOG /* don't use watchdog */ - -#define CONFIG_NETCONSOLE 1 - -#define CONFIG_BOARD_EARLY_INIT_R 1 /* do board-specific init */ -#define CONFIG_MISC_INIT_R - -#define CONFIG_SYS_XLB_PIPELINING 1 /* gives better performance */ - -#define CONFIG_HIGH_BATS 1 /* High BATs supported */ - -/* - * Serial console configuration - */ -#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ -#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } - -/* - * DDR - */ -#define SDRAM_DDR 1 /* is DDR */ -/* Settings for XLB = 132 MHz */ -#define SDRAM_MODE 0x018D0000 -#define SDRAM_EMODE 0x40090000 -#define SDRAM_CONTROL 0x704f0f00 -#define SDRAM_CONFIG1 0x73722930 -#define SDRAM_CONFIG2 0x47770000 -#define SDRAM_TAPDELAY 0x10000000 - -/* - * PCI - no support - */ - -/* - * USB - */ -#define CONFIG_USB_OHCI -#define CONFIG_USB_CLOCK 0x0001BBBB -#define CONFIG_USB_CONFIG 0x00001000 - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - -/* - * Command line configuration. - */ -#define CONFIG_CMD_SDRAM - -#define CONFIG_TIMESTAMP /* Print image info with timestamp */ - -/* - * Boot low with 16 MB Flash - */ -#define CONFIG_SYS_LOWBOOT 1 -#define CONFIG_SYS_LOWBOOT16 1 - -/* - * Autobooting - */ - -#define CONFIG_PREBOOT "echo;" \ - "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ - "echo" - -#undef CONFIG_BOOTARGS - -#define CONFIG_EXTRA_ENV_SETTINGS \ - "bootcmd=run net_nfs\0" \ - "bootdelay=3\0" \ - "baudrate=115200\0" \ - "preboot=echo;echo Type "run flash_nfs" to mount root " \ - "filesystem over NFS; echo\0" \ - "netdev=eth0\0" \ - "ramargs=setenv bootargs root=/dev/ram rw wdt=off \0" \ - "addip=setenv bootargs $(bootargs) " \ - "ip=$(ipaddr):$(serverip):$(gatewayip):" \ - "$(netmask):$(hostname):$(netdev):off panic=1\0" \ - "flash_nfs=run nfsargs addip;bootm $(kernel_addr)\0" \ - "flash_self=run ramargs addip;bootm $(kernel_addr) " \ - "$(ramdisk_addr)\0" \ - "net_nfs=tftp 200000 $(bootfile);run nfsargs addip;bootm\0" \ - "nfsargs=setenv bootargs root=/dev/nfs rw " \ - "nfsroot=$(serverip):$(rootpath) wdt=off\0" \ - "hostname=v38b\0" \ - "ethact=FEC\0" \ - "rootpath=/opt/eldk-3.1.1/ppc_6xx\0" \ - "update=prot off ff000000 ff03ffff; era ff000000 ff03ffff; " \ - "cp.b 200000 ff000000 $(filesize);" \ - "prot on ff000000 ff03ffff\0" \ - "load=tftp 200000 $(u-boot)\0" \ - "netmask=255.255.0.0\0" \ - "ipaddr=192.168.160.18\0" \ - "serverip=192.168.1.1\0" \ - "bootfile=/tftpboot/v38b/uImage\0" \ - "u-boot=/tftpboot/v38b/u-boot.bin\0" \ - "" - -#define CONFIG_BOOTCOMMAND "run net_nfs" - -/* - * IPB Bus clocking configuration. - */ -#undef CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ - -/* - * Flash configuration - use CFI driver - */ -#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */ -#define CONFIG_FLASH_CFI_DRIVER 1 /* Use the common driver */ -#define CONFIG_SYS_FLASH_CFI_AMD_RESET 1 -#define CONFIG_SYS_FLASH_BASE 0xFF000000 -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks */ -#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } -#define CONFIG_SYS_FLASH_SIZE 0x01000000 /* 16 MiB */ -#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max num of sects on one chip */ -#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* flash write speed-up */ - -/* - * Environment settings - */ -#define CONFIG_ENV_IS_IN_FLASH 1 -#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x00040000) -#define CONFIG_ENV_SIZE 0x10000 -#define CONFIG_ENV_SECT_SIZE 0x10000 -#define CONFIG_ENV_OVERWRITE 1 - -/* - * Memory map - */ -#define CONFIG_SYS_MBAR 0xF0000000 -#define CONFIG_SYS_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_DEFAULT_MBAR 0x80000000 - -/* Use SRAM until RAM will be available */ -#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM -#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE /* Size of used area in DPRAM */ - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) -# define CONFIG_SYS_RAMBOOT 1 -#endif - -#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256kB for Monitor */ -#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128kB for malloc() */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Linux initial memory map */ - -/* - * Ethernet configuration - */ -#define CONFIG_MPC5xxx_FEC 1 -#define CONFIG_MPC5xxx_FEC_MII100 -#define CONFIG_PHY_ADDR 0x00 -#define CONFIG_MII 1 - -/* - * GPIO configuration - */ -#define CONFIG_SYS_GPS_PORT_CONFIG 0x90001404 - -/* - * Miscellaneous configurable options - */ -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ - -#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ - -#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ -#if defined(CONFIG_CMD_KGDB) -# define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */ -#endif - -/* - * Various low-level settings - */ -#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI -#define CONFIG_SYS_HID0_FINAL HID0_ICE - -#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE -#define CONFIG_SYS_BOOTCS_CFG 0x00047801 -#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE -#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE - -#define CONFIG_SYS_CS_BURST 0x00000000 -#define CONFIG_SYS_CS_DEADCYCLE 0x33333333 - -#define CONFIG_SYS_RESET_ADDRESS 0xff000000 - -/* - * IDE/ATA (supports IDE harddisk) - */ -#undef CONFIG_IDE_8xx_PCCARD /* Don't use IDE with PC Card Adapter */ -#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ -#undef CONFIG_IDE_LED /* LED for ide not supported */ - -#define CONFIG_IDE_RESET /* reset for ide supported */ -#define CONFIG_IDE_PREINIT - -#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ -#define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */ - -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 - -#define CONFIG_SYS_ATA_BASE_ADDR MPC5XXX_ATA - -#define CONFIG_SYS_ATA_DATA_OFFSET (0x0060) /* data I/O offset */ - -#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET) /* normal register accesses offset */ - -#define CONFIG_SYS_ATA_ALT_OFFSET (0x005C) /* alternate registers offset */ - -#define CONFIG_SYS_ATA_STRIDE 4 /* Interval between registers */ - -/* - * Status LED - */ - -#define CONFIG_SYS_LED_BASE MPC5XXX_GPT7_ENABLE /* Timer 7 GPIO */ -#ifndef __ASSEMBLY__ -typedef unsigned int led_id_t; - -#define __led_toggle(_msk) \ - do { \ - *((volatile long *) (CONFIG_SYS_LED_BASE)) ^= (_msk); \ - } while(0) - -#define __led_set(_msk, _st) \ - do { \ - if ((_st)) \ - *((volatile long *) (CONFIG_SYS_LED_BASE)) &= ~(_msk); \ - else \ - *((volatile long *) (CONFIG_SYS_LED_BASE)) |= (_msk); \ - } while(0) - -#define __led_init(_msk, st) \ - do { \ - *((volatile long *) (CONFIG_SYS_LED_BASE)) |= 0x34; \ - } while(0) -#endif /* __ASSEMBLY__ */ - -#endif /* __CONFIG_H */ diff --git a/include/keyboard.h b/include/keyboard.h index 5cbd9f8ba8..9b51e20322 100644 --- a/include/keyboard.h +++ b/include/keyboard.h @@ -98,7 +98,7 @@ extern int kbd_init_hw(void); extern void pckbd_leds(unsigned char leds); #endif /* !CONFIG_DM_KEYBOARD */
-#if defined(CONFIG_MPC5xxx) || defined(CONFIG_ARCH_MPC8540) || \ +#if defined(CONFIG_ARCH_MPC8540) || \ defined(CONFIG_ARCH_MPC8541) || defined(CONFIG_ARCH_MPC8555) int ps2ser_check(void); #endif diff --git a/include/mpc5xxx.h b/include/mpc5xxx.h deleted file mode 100644 index 10daf0944b..0000000000 --- a/include/mpc5xxx.h +++ /dev/null @@ -1,893 +0,0 @@ -/* - * include/asm-ppc/mpc5xxx.h - * - * Prototypes, etc. for the Motorola MPC5xxx - * embedded cpu chips - * - * 2003 (c) MontaVista, Software, Inc. - * Author: Dale Farnsworth dfarnsworth@mvista.com - * - * 2003 (C) Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#ifndef __ASMPPC_MPC5XXX_H -#define __ASMPPC_MPC5XXX_H - -#include <asm/types.h> - -/* Processor name */ -#define CPU_ID_STR "MPC5200" - -/* Exception offsets (PowerPC standard) */ -#define EXC_OFF_SYS_RESET 0x0100 -#define _START_OFFSET EXC_OFF_SYS_RESET - -/* useful macros for manipulating CSx_START/STOP */ -#define START_REG(start) ((start) >> 16) -#define STOP_REG(start, size) (((start) + (size) - 1) >> 16) - -/* Internal memory map */ - -#define MPC5XXX_CS0_START (CONFIG_SYS_MBAR + 0x0004) -#define MPC5XXX_CS0_STOP (CONFIG_SYS_MBAR + 0x0008) -#define MPC5XXX_CS1_START (CONFIG_SYS_MBAR + 0x000c) -#define MPC5XXX_CS1_STOP (CONFIG_SYS_MBAR + 0x0010) -#define MPC5XXX_CS2_START (CONFIG_SYS_MBAR + 0x0014) -#define MPC5XXX_CS2_STOP (CONFIG_SYS_MBAR + 0x0018) -#define MPC5XXX_CS3_START (CONFIG_SYS_MBAR + 0x001c) -#define MPC5XXX_CS3_STOP (CONFIG_SYS_MBAR + 0x0020) -#define MPC5XXX_CS4_START (CONFIG_SYS_MBAR + 0x0024) -#define MPC5XXX_CS4_STOP (CONFIG_SYS_MBAR + 0x0028) -#define MPC5XXX_CS5_START (CONFIG_SYS_MBAR + 0x002c) -#define MPC5XXX_CS5_STOP (CONFIG_SYS_MBAR + 0x0030) -#define MPC5XXX_BOOTCS_START (CONFIG_SYS_MBAR + 0x004c) -#define MPC5XXX_BOOTCS_STOP (CONFIG_SYS_MBAR + 0x0050) -#define MPC5XXX_ADDECR (CONFIG_SYS_MBAR + 0x0054) - -#define MPC5XXX_CS6_START (CONFIG_SYS_MBAR + 0x0058) -#define MPC5XXX_CS6_STOP (CONFIG_SYS_MBAR + 0x005c) -#define MPC5XXX_CS7_START (CONFIG_SYS_MBAR + 0x0060) -#define MPC5XXX_CS7_STOP (CONFIG_SYS_MBAR + 0x0064) -#define MPC5XXX_SDRAM_CS0CFG (CONFIG_SYS_MBAR + 0x0034) -#define MPC5XXX_SDRAM_CS1CFG (CONFIG_SYS_MBAR + 0x0038) - -#define MPC5XXX_SDRAM (CONFIG_SYS_MBAR + 0x0100) -#define MPC5XXX_CDM (CONFIG_SYS_MBAR + 0x0200) -#define MPC5XXX_LPB (CONFIG_SYS_MBAR + 0x0300) -#define MPC5XXX_ICTL (CONFIG_SYS_MBAR + 0x0500) -#define MPC5XXX_GPT (CONFIG_SYS_MBAR + 0x0600) -#define MPC5XXX_GPIO (CONFIG_SYS_MBAR + 0x0b00) -#define MPC5XXX_WU_GPIO (CONFIG_SYS_MBAR + 0x0c00) -#define MPC5XXX_PCI (CONFIG_SYS_MBAR + 0x0d00) -#define MPC5XXX_SPI (CONFIG_SYS_MBAR + 0x0f00) -#define MPC5XXX_USB (CONFIG_SYS_MBAR + 0x1000) -#define MPC5XXX_SDMA (CONFIG_SYS_MBAR + 0x1200) -#define MPC5XXX_XLBARB (CONFIG_SYS_MBAR + 0x1f00) - -#define MPC5XXX_PSC1 (CONFIG_SYS_MBAR + 0x2000) -#define MPC5XXX_PSC2 (CONFIG_SYS_MBAR + 0x2200) -#define MPC5XXX_PSC3 (CONFIG_SYS_MBAR + 0x2400) -#define MPC5XXX_PSC4 (CONFIG_SYS_MBAR + 0x2600) -#define MPC5XXX_PSC5 (CONFIG_SYS_MBAR + 0x2800) -#define MPC5XXX_PSC6 (CONFIG_SYS_MBAR + 0x2c00) - -#define MPC5XXX_FEC (CONFIG_SYS_MBAR + 0x3000) -#define MPC5XXX_ATA (CONFIG_SYS_MBAR + 0x3A00) - -#define MPC5XXX_I2C1 (CONFIG_SYS_MBAR + 0x3D00) -#define MPC5XXX_I2C2 (CONFIG_SYS_MBAR + 0x3D40) - -#define MPC5XXX_SRAM (CONFIG_SYS_MBAR + 0x8000) -#define MPC5XXX_SRAM_SIZE (16*1024) - -/* SDRAM Controller */ -#define MPC5XXX_SDRAM_MODE (MPC5XXX_SDRAM + 0x0000) -#define MPC5XXX_SDRAM_CTRL (MPC5XXX_SDRAM + 0x0004) -#define MPC5XXX_SDRAM_CONFIG1 (MPC5XXX_SDRAM + 0x0008) -#define MPC5XXX_SDRAM_CONFIG2 (MPC5XXX_SDRAM + 0x000c) -#define MPC5XXX_SDRAM_SDELAY (MPC5XXX_SDRAM + 0x0090) - -/* Clock Distribution Module */ -#define MPC5XXX_CDM_JTAGID (MPC5XXX_CDM + 0x0000) -#define MPC5XXX_CDM_PORCFG (MPC5XXX_CDM + 0x0004) -#define MPC5XXX_CDM_BRDCRMB (MPC5XXX_CDM + 0x0008) -#define MPC5XXX_CDM_CFG (MPC5XXX_CDM + 0x000c) -#define MPC5XXX_CDM_48_FDC (MPC5XXX_CDM + 0x0010) -#define MPC5XXX_CDM_CLK_ENA (MPC5XXX_CDM + 0x0014) -#define MPC5XXX_CDM_SRESET (MPC5XXX_CDM + 0x0020) - -/* Local Plus Bus interface */ -#define MPC5XXX_CS0_CFG (MPC5XXX_LPB + 0x0000) -#define MPC5XXX_CS1_CFG (MPC5XXX_LPB + 0x0004) -#define MPC5XXX_CS2_CFG (MPC5XXX_LPB + 0x0008) -#define MPC5XXX_CS3_CFG (MPC5XXX_LPB + 0x000c) -#define MPC5XXX_CS4_CFG (MPC5XXX_LPB + 0x0010) -#define MPC5XXX_CS5_CFG (MPC5XXX_LPB + 0x0014) -#define MPC5XXX_BOOTCS_CFG MPC5XXX_CS0_CFG -#define MPC5XXX_CS_CTRL (MPC5XXX_LPB + 0x0018) -#define MPC5XXX_CS_STATUS (MPC5XXX_LPB + 0x001c) -#define MPC5XXX_CS6_CFG (MPC5XXX_LPB + 0x0020) -#define MPC5XXX_CS7_CFG (MPC5XXX_LPB + 0x0024) -#define MPC5XXX_CS_BURST (MPC5XXX_LPB + 0x0028) -#define MPC5XXX_CS_DEADCYCLE (MPC5XXX_LPB + 0x002c) - -/* XLB Arbiter registers */ -#define MPC5XXX_XLBARB_CFG (MPC5XXX_XLBARB + 0x40) -#define MPC5XXX_XLBARB_MPRIEN (MPC5XXX_XLBARB + 0x64) -#define MPC5XXX_XLBARB_MPRIVAL (MPC5XXX_XLBARB + 0x68) - -/* GPIO registers */ -#define MPC5XXX_GPS_PORT_CONFIG (MPC5XXX_GPIO + 0x0000) - -/* Standard GPIO registers (simple, output only and simple interrupt */ -#define MPC5XXX_GPIO_ENABLE (MPC5XXX_GPIO + 0x0004) -#define MPC5XXX_GPIO_ODE (MPC5XXX_GPIO + 0x0008) -#define MPC5XXX_GPIO_DIR (MPC5XXX_GPIO + 0x000c) -#define MPC5XXX_GPIO_DATA_O (MPC5XXX_GPIO + 0x0010) -#define MPC5XXX_GPIO_DATA_I (MPC5XXX_GPIO + 0x0014) -#define MPC5XXX_GPIO_OO_ENABLE (MPC5XXX_GPIO + 0x0018) -#define MPC5XXX_GPIO_OO_DATA (MPC5XXX_GPIO + 0x001C) -#define MPC5XXX_GPIO_SI_ENABLE (MPC5XXX_GPIO + 0x0020) -#define MPC5XXX_GPIO_SI_ODE (MPC5XXX_GPIO + 0x0024) -#define MPC5XXX_GPIO_SI_DIR (MPC5XXX_GPIO + 0x0028) -#define MPC5XXX_GPIO_SI_DATA (MPC5XXX_GPIO + 0x002C) -#define MPC5XXX_GPIO_SI_IEN (MPC5XXX_GPIO + 0x0030) -#define MPC5XXX_GPIO_SI_ITYPE (MPC5XXX_GPIO + 0x0034) -#define MPC5XXX_GPIO_SI_MEN (MPC5XXX_GPIO + 0x0038) -#define MPC5XXX_GPIO_SI_STATUS (MPC5XXX_GPIO + 0x003C) - -/* WakeUp GPIO registers */ -#define MPC5XXX_WU_GPIO_ENABLE (MPC5XXX_WU_GPIO + 0x0000) -#define MPC5XXX_WU_GPIO_ODE (MPC5XXX_WU_GPIO + 0x0004) -#define MPC5XXX_WU_GPIO_DIR (MPC5XXX_WU_GPIO + 0x0008) -#define MPC5XXX_WU_GPIO_DATA_O (MPC5XXX_WU_GPIO + 0x000c) -#define MPC5XXX_WU_GPIO_DATA_I (MPC5XXX_WU_GPIO + 0x0020) - -/* GPIO pins, for Rev.B chip */ -#define GPIO_WKUP_7 0x80000000UL -#define GPIO_PSC6_0 0x10000000UL -#define GPIO_PSC3_9 0x04000000UL -#define GPIO_PSC1_4 0x01000000UL -#define GPIO_PSC2_4 0x02000000UL - -#define MPC5XXX_GPIO_SIMPLE_PSC6_3 0x20000000UL -#define MPC5XXX_GPIO_SIMPLE_PSC6_2 0x10000000UL -#define MPC5XXX_GPIO_SIMPLE_PSC3_7 0x00002000UL -#define MPC5XXX_GPIO_SIMPLE_PSC3_6 0x00001000UL -#define MPC5XXX_GPIO_SIMPLE_PSC3_3 0x00000800UL -#define MPC5XXX_GPIO_SIMPLE_PSC3_2 0x00000400UL -#define MPC5XXX_GPIO_SIMPLE_PSC3_1 0x00000200UL -#define MPC5XXX_GPIO_SIMPLE_PSC3_0 0x00000100UL -#define MPC5XXX_GPIO_SIMPLE_PSC2_3 0x00000080UL -#define MPC5XXX_GPIO_SIMPLE_PSC2_2 0x00000040UL -#define MPC5XXX_GPIO_SIMPLE_PSC2_1 0x00000020UL -#define MPC5XXX_GPIO_SIMPLE_PSC2_0 0x00000010UL -#define MPC5XXX_GPIO_SIMPLE_PSC1_3 0x00000008UL -#define MPC5XXX_GPIO_SIMPLE_PSC1_2 0x00000004UL -#define MPC5XXX_GPIO_SIMPLE_PSC1_1 0x00000002UL -#define MPC5XXX_GPIO_SIMPLE_PSC1_0 0x00000001UL - -#define MPC5XXX_GPIO_SINT_ETH_16 0x80 -#define MPC5XXX_GPIO_SINT_ETH_15 0x40 -#define MPC5XXX_GPIO_SINT_ETH_14 0x20 -#define MPC5XXX_GPIO_SINT_ETH_13 0x10 -#define MPC5XXX_GPIO_SINT_USB1_9 0x08 -#define MPC5XXX_GPIO_SINT_PSC3_8 0x04 -#define MPC5XXX_GPIO_SINT_PSC3_5 0x02 -#define MPC5XXX_GPIO_SINT_PSC3_4 0x01 - -#define MPC5XXX_GPIO_WKUP_7 0x80 -#define MPC5XXX_GPIO_WKUP_6 0x40 -#define MPC5XXX_GPIO_WKUP_PSC6_1 0x20 -#define MPC5XXX_GPIO_WKUP_PSC6_0 0x10 -#define MPC5XXX_GPIO_WKUP_ETH17 0x08 -#define MPC5XXX_GPIO_WKUP_PSC3_9 0x04 -#define MPC5XXX_GPIO_WKUP_PSC2_4 0x02 -#define MPC5XXX_GPIO_WKUP_PSC1_4 0x01 - -/* PCI registers */ -#define MPC5XXX_PCI_CMD (MPC5XXX_PCI + 0x04) -#define MPC5XXX_PCI_CFG (MPC5XXX_PCI + 0x0c) -#define MPC5XXX_PCI_BAR0 (MPC5XXX_PCI + 0x10) -#define MPC5XXX_PCI_BAR1 (MPC5XXX_PCI + 0x14) -#define MPC5XXX_PCI_GSCR (MPC5XXX_PCI + 0x60) -#define MPC5XXX_PCI_TBATR0 (MPC5XXX_PCI + 0x64) -#define MPC5XXX_PCI_TBATR1 (MPC5XXX_PCI + 0x68) -#define MPC5XXX_PCI_TCR (MPC5XXX_PCI + 0x6c) -#define MPC5XXX_PCI_IW0BTAR (MPC5XXX_PCI + 0x70) -#define MPC5XXX_PCI_IW1BTAR (MPC5XXX_PCI + 0x74) -#define MPC5XXX_PCI_IW2BTAR (MPC5XXX_PCI + 0x78) -#define MPC5XXX_PCI_IWCR (MPC5XXX_PCI + 0x80) -#define MPC5XXX_PCI_ICR (MPC5XXX_PCI + 0x84) -#define MPC5XXX_PCI_ISR (MPC5XXX_PCI + 0x88) -#define MPC5XXX_PCI_ARB (MPC5XXX_PCI + 0x8c) -#define MPC5XXX_PCI_CAR (MPC5XXX_PCI + 0xf8) - -/* Interrupt Controller registers */ -#define MPC5XXX_ICTL_PER_MASK (MPC5XXX_ICTL + 0x0000) -#define MPC5XXX_ICTL_PER_PRIO1 (MPC5XXX_ICTL + 0x0004) -#define MPC5XXX_ICTL_PER_PRIO2 (MPC5XXX_ICTL + 0x0008) -#define MPC5XXX_ICTL_PER_PRIO3 (MPC5XXX_ICTL + 0x000c) -#define MPC5XXX_ICTL_EXT (MPC5XXX_ICTL + 0x0010) -#define MPC5XXX_ICTL_CRIT (MPC5XXX_ICTL + 0x0014) -#define MPC5XXX_ICTL_MAIN_PRIO1 (MPC5XXX_ICTL + 0x0018) -#define MPC5XXX_ICTL_MAIN_PRIO2 (MPC5XXX_ICTL + 0x001c) -#define MPC5XXX_ICTL_STS (MPC5XXX_ICTL + 0x0024) -#define MPC5XXX_ICTL_CRIT_STS (MPC5XXX_ICTL + 0x0028) -#define MPC5XXX_ICTL_MAIN_STS (MPC5XXX_ICTL + 0x002c) -#define MPC5XXX_ICTL_PER_STS (MPC5XXX_ICTL + 0x0030) -#define MPC5XXX_ICTL_BUS_STS (MPC5XXX_ICTL + 0x0038) - -#define NR_IRQS 64 - -/* IRQ mapping - these are our logical IRQ numbers */ -#define MPC5XXX_CRIT_IRQ_NUM 4 -#define MPC5XXX_MAIN_IRQ_NUM 17 -#define MPC5XXX_SDMA_IRQ_NUM 17 -#define MPC5XXX_PERP_IRQ_NUM 23 - -#define MPC5XXX_CRIT_IRQ_BASE 1 -#define MPC5XXX_MAIN_IRQ_BASE (MPC5XXX_CRIT_IRQ_BASE + MPC5XXX_CRIT_IRQ_NUM) -#define MPC5XXX_SDMA_IRQ_BASE (MPC5XXX_MAIN_IRQ_BASE + MPC5XXX_MAIN_IRQ_NUM) -#define MPC5XXX_PERP_IRQ_BASE (MPC5XXX_SDMA_IRQ_BASE + MPC5XXX_SDMA_IRQ_NUM) - -#define MPC5XXX_IRQ0 (MPC5XXX_CRIT_IRQ_BASE + 0) -#define MPC5XXX_SLICE_TIMER_0_IRQ (MPC5XXX_CRIT_IRQ_BASE + 1) -#define MPC5XXX_HI_INT_IRQ (MPC5XXX_CRIT_IRQ_BASE + 2) -#define MPC5XXX_CCS_IRQ (MPC5XXX_CRIT_IRQ_BASE + 3) - -#define MPC5XXX_IRQ1 (MPC5XXX_MAIN_IRQ_BASE + 1) -#define MPC5XXX_IRQ2 (MPC5XXX_MAIN_IRQ_BASE + 2) -#define MPC5XXX_IRQ3 (MPC5XXX_MAIN_IRQ_BASE + 3) -#define MPC5XXX_RTC_PINT_IRQ (MPC5XXX_MAIN_IRQ_BASE + 5) -#define MPC5XXX_RTC_SINT_IRQ (MPC5XXX_MAIN_IRQ_BASE + 6) -#define MPC5XXX_RTC_GPIO_STD_IRQ (MPC5XXX_MAIN_IRQ_BASE + 7) -#define MPC5XXX_RTC_GPIO_WKUP_IRQ (MPC5XXX_MAIN_IRQ_BASE + 8) -#define MPC5XXX_TMR0_IRQ (MPC5XXX_MAIN_IRQ_BASE + 9) -#define MPC5XXX_TMR1_IRQ (MPC5XXX_MAIN_IRQ_BASE + 10) -#define MPC5XXX_TMR2_IRQ (MPC5XXX_MAIN_IRQ_BASE + 11) -#define MPC5XXX_TMR3_IRQ (MPC5XXX_MAIN_IRQ_BASE + 12) -#define MPC5XXX_TMR4_IRQ (MPC5XXX_MAIN_IRQ_BASE + 13) -#define MPC5XXX_TMR5_IRQ (MPC5XXX_MAIN_IRQ_BASE + 14) -#define MPC5XXX_TMR6_IRQ (MPC5XXX_MAIN_IRQ_BASE + 15) -#define MPC5XXX_TMR7_IRQ (MPC5XXX_MAIN_IRQ_BASE + 16) - -#define MPC5XXX_SDMA_IRQ (MPC5XXX_PERP_IRQ_BASE + 0) -#define MPC5XXX_PSC1_IRQ (MPC5XXX_PERP_IRQ_BASE + 1) -#define MPC5XXX_PSC2_IRQ (MPC5XXX_PERP_IRQ_BASE + 2) -#define MPC5XXX_PSC3_IRQ (MPC5XXX_PERP_IRQ_BASE + 3) -#define MPC5XXX_PSC6_IRQ (MPC5XXX_PERP_IRQ_BASE + 4) -#define MPC5XXX_IRDA_IRQ (MPC5XXX_PERP_IRQ_BASE + 4) -#define MPC5XXX_FEC_IRQ (MPC5XXX_PERP_IRQ_BASE + 5) -#define MPC5XXX_USB_IRQ (MPC5XXX_PERP_IRQ_BASE + 6) -#define MPC5XXX_ATA_IRQ (MPC5XXX_PERP_IRQ_BASE + 7) -#define MPC5XXX_PCI_CNTRL_IRQ (MPC5XXX_PERP_IRQ_BASE + 8) -#define MPC5XXX_PCI_SCIRX_IRQ (MPC5XXX_PERP_IRQ_BASE + 9) -#define MPC5XXX_PCI_SCITX_IRQ (MPC5XXX_PERP_IRQ_BASE + 10) -#define MPC5XXX_PSC4_IRQ (MPC5XXX_PERP_IRQ_BASE + 11) -#define MPC5XXX_PSC5_IRQ (MPC5XXX_PERP_IRQ_BASE + 12) -#define MPC5XXX_SPI_MODF_IRQ (MPC5XXX_PERP_IRQ_BASE + 13) -#define MPC5XXX_SPI_SPIF_IRQ (MPC5XXX_PERP_IRQ_BASE + 14) -#define MPC5XXX_I2C1_IRQ (MPC5XXX_PERP_IRQ_BASE + 15) -#define MPC5XXX_I2C2_IRQ (MPC5XXX_PERP_IRQ_BASE + 16) -#define MPC5XXX_MSCAN1_IRQ (MPC5XXX_PERP_IRQ_BASE + 17) -#define MPC5XXX_MSCAN2_IRQ (MPC5XXX_PERP_IRQ_BASE + 18) -#define MPC5XXX_IR_RX_IRQ (MPC5XXX_PERP_IRQ_BASE + 19) -#define MPC5XXX_IR_TX_IRQ (MPC5XXX_PERP_IRQ_BASE + 20) -#define MPC5XXX_XLB_ARB_IRQ (MPC5XXX_PERP_IRQ_BASE + 21) -#define MPC5XXX_BDLC_IRQ (MPC5XXX_PERP_IRQ_BASE + 22) - -/* General Purpose Timers registers */ -#define MPC5XXX_GPT0_ENABLE (MPC5XXX_GPT + 0x0) -#define MPC5XXX_GPT0_COUNTER (MPC5XXX_GPT + 0x4) -#define MPC5XXX_GPT0_STATUS (MPC5XXX_GPT + 0x0C) -#define MPC5XXX_GPT1_ENABLE (MPC5XXX_GPT + 0x10) -#define MPC5XXX_GPT1_COUNTER (MPC5XXX_GPT + 0x14) -#define MPC5XXX_GPT1_STATUS (MPC5XXX_GPT + 0x1C) -#define MPC5XXX_GPT2_ENABLE (MPC5XXX_GPT + 0x20) -#define MPC5XXX_GPT2_COUNTER (MPC5XXX_GPT + 0x24) -#define MPC5XXX_GPT2_STATUS (MPC5XXX_GPT + 0x2C) -#define MPC5XXX_GPT3_ENABLE (MPC5XXX_GPT + 0x30) -#define MPC5XXX_GPT3_COUNTER (MPC5XXX_GPT + 0x34) -#define MPC5XXX_GPT3_STATUS (MPC5XXX_GPT + 0x3C) -#define MPC5XXX_GPT4_ENABLE (MPC5XXX_GPT + 0x40) -#define MPC5XXX_GPT4_COUNTER (MPC5XXX_GPT + 0x44) -#define MPC5XXX_GPT4_STATUS (MPC5XXX_GPT + 0x4C) -#define MPC5XXX_GPT5_ENABLE (MPC5XXX_GPT + 0x50) -#define MPC5XXX_GPT5_STATUS (MPC5XXX_GPT + 0x5C) -#define MPC5XXX_GPT5_COUNTER (MPC5XXX_GPT + 0x54) -#define MPC5XXX_GPT6_ENABLE (MPC5XXX_GPT + 0x60) -#define MPC5XXX_GPT6_COUNTER (MPC5XXX_GPT + 0x64) -#define MPC5XXX_GPT6_STATUS (MPC5XXX_GPT + 0x6C) -#define MPC5XXX_GPT7_ENABLE (MPC5XXX_GPT + 0x70) -#define MPC5XXX_GPT7_COUNTER (MPC5XXX_GPT + 0x74) -#define MPC5XXX_GPT7_STATUS (MPC5XXX_GPT + 0x7C) - -#define MPC5XXX_GPT_GPIO_PIN(status) ((0x00000100 & (status)) >> 8) - -#define MPC5XXX_GPT7_PWMCFG (MPC5XXX_GPT + 0x78) - -/* ATA registers */ -#define MPC5XXX_ATA_HOST_CONFIG (MPC5XXX_ATA + 0x0000) -#define MPC5XXX_ATA_PIO1 (MPC5XXX_ATA + 0x0008) -#define MPC5XXX_ATA_PIO2 (MPC5XXX_ATA + 0x000C) -#define MPC5XXX_ATA_SHARE_COUNT (MPC5XXX_ATA + 0x002C) - -/* I2Cn control register bits */ -#define I2C_EN 0x80 -#define I2C_IEN 0x40 -#define I2C_STA 0x20 -#define I2C_TX 0x10 -#define I2C_TXAK 0x08 -#define I2C_RSTA 0x04 -#define I2C_INIT_MASK (I2C_EN | I2C_STA | I2C_TX | I2C_RSTA) - -/* I2Cn status register bits */ -#define I2C_CF 0x80 -#define I2C_AAS 0x40 -#define I2C_BB 0x20 -#define I2C_AL 0x10 -#define I2C_SRW 0x04 -#define I2C_IF 0x02 -#define I2C_RXAK 0x01 - -/* SPI control register 1 bits */ -#define SPI_CR_LSBFE 0x01 -#define SPI_CR_SSOE 0x02 -#define SPI_CR_CPHA 0x04 -#define SPI_CR_CPOL 0x08 -#define SPI_CR_MSTR 0x10 -#define SPI_CR_SWOM 0x20 -#define SPI_CR_SPE 0x40 -#define SPI_CR_SPIE 0x80 - -/* SPI status register bits */ -#define SPI_SR_MODF 0x10 -#define SPI_SR_WCOL 0x40 -#define SPI_SR_SPIF 0x80 - -/* SPI port data register bits */ -#define SPI_PDR_SS 0x08 - -/* Programmable Serial Controller (PSC) status register bits */ -#define PSC_SR_CDE 0x0080 -#define PSC_SR_RXRDY 0x0100 -#define PSC_SR_RXFULL 0x0200 -#define PSC_SR_TXRDY 0x0400 -#define PSC_SR_TXEMP 0x0800 -#define PSC_SR_OE 0x1000 -#define PSC_SR_PE 0x2000 -#define PSC_SR_FE 0x4000 -#define PSC_SR_RB 0x8000 - -/* PSC Command values */ -#define PSC_RX_ENABLE 0x0001 -#define PSC_RX_DISABLE 0x0002 -#define PSC_TX_ENABLE 0x0004 -#define PSC_TX_DISABLE 0x0008 -#define PSC_SEL_MODE_REG_1 0x0010 -#define PSC_RST_RX 0x0020 -#define PSC_RST_TX 0x0030 -#define PSC_RST_ERR_STAT 0x0040 -#define PSC_RST_BRK_CHG_INT 0x0050 -#define PSC_START_BRK 0x0060 -#define PSC_STOP_BRK 0x0070 - -/* PSC Rx FIFO status bits */ -#define PSC_RX_FIFO_ERR 0x0040 -#define PSC_RX_FIFO_UF 0x0020 -#define PSC_RX_FIFO_OF 0x0010 -#define PSC_RX_FIFO_FR 0x0008 -#define PSC_RX_FIFO_FULL 0x0004 -#define PSC_RX_FIFO_ALARM 0x0002 -#define PSC_RX_FIFO_EMPTY 0x0001 - -/* PSC interrupt mask bits */ -#define PSC_IMR_TXRDY 0x0100 -#define PSC_IMR_RXRDY 0x0200 -#define PSC_IMR_DB 0x0400 -#define PSC_IMR_IPC 0x8000 - -/* PSC input port change bits */ -#define PSC_IPCR_CTS 0x01 -#define PSC_IPCR_DCD 0x02 - -/* PSC mode fields */ -#define PSC_MODE_5_BITS 0x00 -#define PSC_MODE_6_BITS 0x01 -#define PSC_MODE_7_BITS 0x02 -#define PSC_MODE_8_BITS 0x03 -#define PSC_MODE_PAREVEN 0x00 -#define PSC_MODE_PARODD 0x04 -#define PSC_MODE_PARFORCE 0x08 -#define PSC_MODE_PARNONE 0x10 -#define PSC_MODE_ERR 0x20 -#define PSC_MODE_FFULL 0x40 -#define PSC_MODE_RXRTS 0x80 - -#define PSC_MODE_ONE_STOP_5_BITS 0x00 -#define PSC_MODE_ONE_STOP 0x07 -#define PSC_MODE_TWO_STOP 0x0f - -/* ATA config fields */ -#define MPC5xxx_ATA_HOSTCONF_SMR 0x80000000UL /* State machine - reset */ -#define MPC5xxx_ATA_HOSTCONF_FR 0x40000000UL /* FIFO Reset */ -#define MPC5xxx_ATA_HOSTCONF_IE 0x02000000UL /* Enable interrupt - in PIO */ -#define MPC5xxx_ATA_HOSTCONF_IORDY 0x01000000UL /* Drive supports - IORDY protocol */ - -#ifndef __ASSEMBLY__ -/* Memory map registers */ -struct mpc5xxx_mmap_ctl { - volatile u32 mbar; - volatile u32 cs0_start; /* 0x0004 */ - volatile u32 cs0_stop; - volatile u32 cs1_start; /* 0x000c */ - volatile u32 cs1_stop; - volatile u32 cs2_start; /* 0x0014 */ - volatile u32 cs2_stop; - volatile u32 cs3_start; /* 0x001c */ - volatile u32 cs3_stop; - volatile u32 cs4_start; /* 0x0024 */ - volatile u32 cs4_stop; - volatile u32 cs5_start; /* 0x002c */ - volatile u32 cs5_stop; - volatile u32 sdram0; /* 0x0034 */ - volatile u32 sdram1; /* 0x0038 */ - volatile u32 dummy1[4]; /* 0x003c */ - volatile u32 boot_start; /* 0x004c */ - volatile u32 boot_stop; - volatile u32 ipbi_ws_ctrl; /* 0x0054 */ - volatile u32 cs6_start; /* 0x0058 */ - volatile u32 cs6_stop; - volatile u32 cs7_start; /* 0x0060 */ - volatile u32 cs7_stop; -}; - -/* Clock distribution module */ -struct mpc5xxx_cdm { - volatile u32 jtagid; /* 0x0000 */ - volatile u32 porcfg; - volatile u32 brdcrmb; /* 0x0008 */ - volatile u32 cfg; - volatile u32 fourtyeight_fdc;/* 0x0010 */ - volatile u32 clock_enable; - volatile u32 system_osc; /* 0x0018 */ - volatile u32 ccscr; - volatile u32 sreset; /* 0x0020 */ - volatile u32 pll_status; - volatile u32 psc1_mccr; /* 0x0028 */ - volatile u32 psc2_mccr; - volatile u32 psc3_mccr; /* 0x0030 */ - volatile u32 psc6_mccr; -}; - -/* SDRAM controller */ -struct mpc5xxx_sdram { - volatile u32 mode; - volatile u32 ctrl; - volatile u32 config1; - volatile u32 config2; - volatile u32 dummy[32]; - volatile u32 sdelay; -}; - -struct mpc5xxx_lpb { - volatile u32 cs0_cfg; - volatile u32 cs1_cfg; - volatile u32 cs2_cfg; - volatile u32 cs3_cfg; - volatile u32 cs4_cfg; - volatile u32 cs5_cfg; - volatile u32 cs_ctrl; - volatile u32 cs_status; - volatile u32 cs6_cfg; - volatile u32 cs7_cfg; - volatile u32 cs_burst; - volatile u32 cs_deadcycle; -}; - - -struct mpc5xxx_psc { - volatile u8 mode; /* PSC + 0x00 */ - volatile u8 reserved0[3]; - union { /* PSC + 0x04 */ - volatile u16 status; - volatile u16 clock_select; - } sr_csr; -#define psc_status sr_csr.status -#define psc_clock_select sr_csr.clock_select - volatile u16 reserved1; - volatile u8 command; /* PSC + 0x08 */ - volatile u8 reserved2[3]; - union { /* PSC + 0x0c */ - volatile u8 buffer_8; - volatile u16 buffer_16; - volatile u32 buffer_32; - } buffer; -#define psc_buffer_8 buffer.buffer_8 -#define psc_buffer_16 buffer.buffer_16 -#define psc_buffer_32 buffer.buffer_32 - union { /* PSC + 0x10 */ - volatile u8 ipcr; - volatile u8 acr; - } ipcr_acr; -#define psc_ipcr ipcr_acr.ipcr -#define psc_acr ipcr_acr.acr - volatile u8 reserved3[3]; - union { /* PSC + 0x14 */ - volatile u16 isr; - volatile u16 imr; - } isr_imr; -#define psc_isr isr_imr.isr -#define psc_imr isr_imr.imr - volatile u16 reserved4; - volatile u8 ctur; /* PSC + 0x18 */ - volatile u8 reserved5[3]; - volatile u8 ctlr; /* PSC + 0x1c */ - volatile u8 reserved6[3]; - volatile u16 ccr; /* PSC + 0x20 */ - volatile u8 reserved7[14]; - volatile u8 ivr; /* PSC + 0x30 */ - volatile u8 reserved8[3]; - volatile u8 ip; /* PSC + 0x34 */ - volatile u8 reserved9[3]; - volatile u8 op1; /* PSC + 0x38 */ - volatile u8 reserved10[3]; - volatile u8 op0; /* PSC + 0x3c */ - volatile u8 reserved11[3]; - volatile u32 sicr; /* PSC + 0x40 */ - volatile u8 ircr1; /* PSC + 0x44 */ - volatile u8 reserved12[3]; - volatile u8 ircr2; /* PSC + 0x44 */ - volatile u8 reserved13[3]; - volatile u8 irsdr; /* PSC + 0x4c */ - volatile u8 reserved14[3]; - volatile u8 irmdr; /* PSC + 0x50 */ - volatile u8 reserved15[3]; - volatile u8 irfdr; /* PSC + 0x54 */ - volatile u8 reserved16[3]; - volatile u16 rfnum; /* PSC + 0x58 */ - volatile u16 reserved17; - volatile u16 tfnum; /* PSC + 0x5c */ - volatile u16 reserved18; - volatile u32 rfdata; /* PSC + 0x60 */ - volatile u16 rfstat; /* PSC + 0x64 */ - volatile u16 reserved20; - volatile u8 rfcntl; /* PSC + 0x68 */ - volatile u8 reserved21[5]; - volatile u16 rfalarm; /* PSC + 0x6e */ - volatile u16 reserved22; - volatile u16 rfrptr; /* PSC + 0x72 */ - volatile u16 reserved23; - volatile u16 rfwptr; /* PSC + 0x76 */ - volatile u16 reserved24; - volatile u16 rflrfptr; /* PSC + 0x7a */ - volatile u16 reserved25; - volatile u16 rflwfptr; /* PSC + 0x7e */ - volatile u32 tfdata; /* PSC + 0x80 */ - volatile u16 tfstat; /* PSC + 0x84 */ - volatile u16 reserved26; - volatile u8 tfcntl; /* PSC + 0x88 */ - volatile u8 reserved27[5]; - volatile u16 tfalarm; /* PSC + 0x8e */ - volatile u16 reserved28; - volatile u16 tfrptr; /* PSC + 0x92 */ - volatile u16 reserved29; - volatile u16 tfwptr; /* PSC + 0x96 */ - volatile u16 reserved30; - volatile u16 tflrfptr; /* PSC + 0x9a */ - volatile u16 reserved31; - volatile u16 tflwfptr; /* PSC + 0x9e */ -}; - -struct mpc5xxx_intr { - volatile u32 per_mask; /* INTR + 0x00 */ - volatile u32 per_pri1; /* INTR + 0x04 */ - volatile u32 per_pri2; /* INTR + 0x08 */ - volatile u32 per_pri3; /* INTR + 0x0c */ - volatile u32 ctrl; /* INTR + 0x10 */ - volatile u32 main_mask; /* INTR + 0x14 */ - volatile u32 main_pri1; /* INTR + 0x18 */ - volatile u32 main_pri2; /* INTR + 0x1c */ - volatile u32 reserved1; /* INTR + 0x20 */ - volatile u32 enc_status; /* INTR + 0x24 */ - volatile u32 crit_status; /* INTR + 0x28 */ - volatile u32 main_status; /* INTR + 0x2c */ - volatile u32 per_status; /* INTR + 0x30 */ - volatile u32 reserved2; /* INTR + 0x34 */ - volatile u32 per_error; /* INTR + 0x38 */ -}; - -struct mpc5xxx_gpio { - volatile u32 port_config; /* GPIO + 0x00 */ - volatile u32 simple_gpioe; /* GPIO + 0x04 */ - volatile u32 simple_ode; /* GPIO + 0x08 */ - volatile u32 simple_ddr; /* GPIO + 0x0c */ - volatile u32 simple_dvo; /* GPIO + 0x10 */ - volatile u32 simple_ival; /* GPIO + 0x14 */ - volatile u8 outo_gpioe; /* GPIO + 0x18 */ - volatile u8 reserved1[3]; /* GPIO + 0x19 */ - volatile u8 outo_dvo; /* GPIO + 0x1c */ - volatile u8 reserved2[3]; /* GPIO + 0x1d */ - volatile u8 sint_gpioe; /* GPIO + 0x20 */ - volatile u8 reserved3[3]; /* GPIO + 0x21 */ - volatile u8 sint_ode; /* GPIO + 0x24 */ - volatile u8 reserved4[3]; /* GPIO + 0x25 */ - volatile u8 sint_ddr; /* GPIO + 0x28 */ - volatile u8 reserved5[3]; /* GPIO + 0x29 */ - volatile u8 sint_dvo; /* GPIO + 0x2c */ - volatile u8 reserved6[3]; /* GPIO + 0x2d */ - volatile u8 sint_inten; /* GPIO + 0x30 */ - volatile u8 reserved7[3]; /* GPIO + 0x31 */ - volatile u16 sint_itype; /* GPIO + 0x34 */ - volatile u16 reserved8; /* GPIO + 0x36 */ - volatile u8 gpio_control; /* GPIO + 0x38 */ - volatile u8 reserved9[3]; /* GPIO + 0x39 */ - volatile u8 sint_istat; /* GPIO + 0x3c */ - volatile u8 sint_ival; /* GPIO + 0x3d */ - volatile u8 bus_errs; /* GPIO + 0x3e */ - volatile u8 reserved10; /* GPIO + 0x3f */ -}; - -struct mpc5xxx_wu_gpio { - volatile u8 enable; /* WU_GPIO + 0x00 */ - volatile u8 reserved1[3]; /* WU_GPIO + 0x01 */ - volatile u8 ode; /* WU_GPIO + 0x04 */ - volatile u8 reserved2[3]; /* WU_GPIO + 0x05 */ - volatile u8 ddr; /* WU_GPIO + 0x08 */ - volatile u8 reserved3[3]; /* WU_GPIO + 0x09 */ - volatile u8 dvo; /* WU_GPIO + 0x0c */ - volatile u8 reserved4[3]; /* WU_GPIO + 0x0d */ - volatile u8 inten; /* WU_GPIO + 0x10 */ - volatile u8 reserved5[3]; /* WU_GPIO + 0x11 */ - volatile u8 iinten; /* WU_GPIO + 0x14 */ - volatile u8 reserved6[3]; /* WU_GPIO + 0x15 */ - volatile u16 itype; /* WU_GPIO + 0x18 */ - volatile u8 reserved7[2]; /* WU_GPIO + 0x1a */ - volatile u8 master_enable; /* WU_GPIO + 0x1c */ - volatile u8 reserved8[3]; /* WU_GPIO + 0x1d */ - volatile u8 ival; /* WU_GPIO + 0x20 */ - volatile u8 reserved9[3]; /* WU_GPIO + 0x21 */ - volatile u8 status; /* WU_GPIO + 0x24 */ - volatile u8 reserved10[3]; /* WU_GPIO + 0x25 */ -}; - -struct mpc5xxx_sdma { - volatile u32 taskBar; /* SDMA + 0x00 */ - volatile u32 currentPointer; /* SDMA + 0x04 */ - volatile u32 endPointer; /* SDMA + 0x08 */ - volatile u32 variablePointer; /* SDMA + 0x0c */ - - volatile u8 IntVect1; /* SDMA + 0x10 */ - volatile u8 IntVect2; /* SDMA + 0x11 */ - volatile u16 PtdCntrl; /* SDMA + 0x12 */ - - volatile u32 IntPend; /* SDMA + 0x14 */ - volatile u32 IntMask; /* SDMA + 0x18 */ - - volatile u16 tcr_0; /* SDMA + 0x1c */ - volatile u16 tcr_1; /* SDMA + 0x1e */ - volatile u16 tcr_2; /* SDMA + 0x20 */ - volatile u16 tcr_3; /* SDMA + 0x22 */ - volatile u16 tcr_4; /* SDMA + 0x24 */ - volatile u16 tcr_5; /* SDMA + 0x26 */ - volatile u16 tcr_6; /* SDMA + 0x28 */ - volatile u16 tcr_7; /* SDMA + 0x2a */ - volatile u16 tcr_8; /* SDMA + 0x2c */ - volatile u16 tcr_9; /* SDMA + 0x2e */ - volatile u16 tcr_a; /* SDMA + 0x30 */ - volatile u16 tcr_b; /* SDMA + 0x32 */ - volatile u16 tcr_c; /* SDMA + 0x34 */ - volatile u16 tcr_d; /* SDMA + 0x36 */ - volatile u16 tcr_e; /* SDMA + 0x38 */ - volatile u16 tcr_f; /* SDMA + 0x3a */ - - volatile u8 IPR0; /* SDMA + 0x3c */ - volatile u8 IPR1; /* SDMA + 0x3d */ - volatile u8 IPR2; /* SDMA + 0x3e */ - volatile u8 IPR3; /* SDMA + 0x3f */ - volatile u8 IPR4; /* SDMA + 0x40 */ - volatile u8 IPR5; /* SDMA + 0x41 */ - volatile u8 IPR6; /* SDMA + 0x42 */ - volatile u8 IPR7; /* SDMA + 0x43 */ - volatile u8 IPR8; /* SDMA + 0x44 */ - volatile u8 IPR9; /* SDMA + 0x45 */ - volatile u8 IPR10; /* SDMA + 0x46 */ - volatile u8 IPR11; /* SDMA + 0x47 */ - volatile u8 IPR12; /* SDMA + 0x48 */ - volatile u8 IPR13; /* SDMA + 0x49 */ - volatile u8 IPR14; /* SDMA + 0x4a */ - volatile u8 IPR15; /* SDMA + 0x4b */ - volatile u8 IPR16; /* SDMA + 0x4c */ - volatile u8 IPR17; /* SDMA + 0x4d */ - volatile u8 IPR18; /* SDMA + 0x4e */ - volatile u8 IPR19; /* SDMA + 0x4f */ - volatile u8 IPR20; /* SDMA + 0x50 */ - volatile u8 IPR21; /* SDMA + 0x51 */ - volatile u8 IPR22; /* SDMA + 0x52 */ - volatile u8 IPR23; /* SDMA + 0x53 */ - volatile u8 IPR24; /* SDMA + 0x54 */ - volatile u8 IPR25; /* SDMA + 0x55 */ - volatile u8 IPR26; /* SDMA + 0x56 */ - volatile u8 IPR27; /* SDMA + 0x57 */ - volatile u8 IPR28; /* SDMA + 0x58 */ - volatile u8 IPR29; /* SDMA + 0x59 */ - volatile u8 IPR30; /* SDMA + 0x5a */ - volatile u8 IPR31; /* SDMA + 0x5b */ - - volatile u32 res1; /* SDMA + 0x5c */ - volatile u32 res2; /* SDMA + 0x60 */ - volatile u32 res3; /* SDMA + 0x64 */ - volatile u32 MDEDebug; /* SDMA + 0x68 */ - volatile u32 ADSDebug; /* SDMA + 0x6c */ - volatile u32 Value1; /* SDMA + 0x70 */ - volatile u32 Value2; /* SDMA + 0x74 */ - volatile u32 Control; /* SDMA + 0x78 */ - volatile u32 Status; /* SDMA + 0x7c */ - volatile u32 EU00; /* SDMA + 0x80 */ - volatile u32 EU01; /* SDMA + 0x84 */ - volatile u32 EU02; /* SDMA + 0x88 */ - volatile u32 EU03; /* SDMA + 0x8c */ - volatile u32 EU04; /* SDMA + 0x90 */ - volatile u32 EU05; /* SDMA + 0x94 */ - volatile u32 EU06; /* SDMA + 0x98 */ - volatile u32 EU07; /* SDMA + 0x9c */ - volatile u32 EU10; /* SDMA + 0xa0 */ - volatile u32 EU11; /* SDMA + 0xa4 */ - volatile u32 EU12; /* SDMA + 0xa8 */ - volatile u32 EU13; /* SDMA + 0xac */ - volatile u32 EU14; /* SDMA + 0xb0 */ - volatile u32 EU15; /* SDMA + 0xb4 */ - volatile u32 EU16; /* SDMA + 0xb8 */ - volatile u32 EU17; /* SDMA + 0xbc */ - volatile u32 EU20; /* SDMA + 0xc0 */ - volatile u32 EU21; /* SDMA + 0xc4 */ - volatile u32 EU22; /* SDMA + 0xc8 */ - volatile u32 EU23; /* SDMA + 0xcc */ - volatile u32 EU24; /* SDMA + 0xd0 */ - volatile u32 EU25; /* SDMA + 0xd4 */ - volatile u32 EU26; /* SDMA + 0xd8 */ - volatile u32 EU27; /* SDMA + 0xdc */ - volatile u32 EU30; /* SDMA + 0xe0 */ - volatile u32 EU31; /* SDMA + 0xe4 */ - volatile u32 EU32; /* SDMA + 0xe8 */ - volatile u32 EU33; /* SDMA + 0xec */ - volatile u32 EU34; /* SDMA + 0xf0 */ - volatile u32 EU35; /* SDMA + 0xf4 */ - volatile u32 EU36; /* SDMA + 0xf8 */ - volatile u32 EU37; /* SDMA + 0xfc */ -}; - -struct mpc5xxx_i2c { - volatile u32 madr; /* I2Cn + 0x00 */ - volatile u32 mfdr; /* I2Cn + 0x04 */ - volatile u32 mcr; /* I2Cn + 0x08 */ - volatile u32 msr; /* I2Cn + 0x0C */ - volatile u32 mdr; /* I2Cn + 0x10 */ -}; - -struct mpc5xxx_spi { - volatile u8 cr1; /* SPI + 0x0F00 */ - volatile u8 cr2; /* SPI + 0x0F01 */ - volatile u8 reserved1[2]; - volatile u8 brr; /* SPI + 0x0F04 */ - volatile u8 sr; /* SPI + 0x0F05 */ - volatile u8 reserved2[3]; - volatile u8 dr; /* SPI + 0x0F09 */ - volatile u8 reserved3[3]; - volatile u8 pdr; /* SPI + 0x0F0D */ - volatile u8 reserved4[2]; - volatile u8 ddr; /* SPI + 0x0F10 */ -}; - - -struct mpc5xxx_gpt { - volatile u32 emsr; /* GPT + Timer# * 0x10 + 0x00 */ - volatile u32 cir; /* GPT + Timer# * 0x10 + 0x04 */ - volatile u32 pwmcr; /* GPT + Timer# * 0x10 + 0x08 */ - volatile u32 sr; /* GPT + Timer# * 0x10 + 0x0c */ -}; - -struct mpc5xxx_gpt_0_7 { - struct mpc5xxx_gpt gpt0; - struct mpc5xxx_gpt gpt1; - struct mpc5xxx_gpt gpt2; - struct mpc5xxx_gpt gpt3; - struct mpc5xxx_gpt gpt4; - struct mpc5xxx_gpt gpt5; - struct mpc5xxx_gpt gpt6; - struct mpc5xxx_gpt gpt7; -}; - -struct mscan_buffer { - volatile u8 idr[0x8]; /* 0x00 */ - volatile u8 dsr[0x10]; /* 0x08 */ - volatile u8 dlr; /* 0x18 */ - volatile u8 tbpr; /* 0x19 */ /* This register is not applicable for receive buffers */ - volatile u16 rsrv1; /* 0x1A */ - volatile u8 tsrh; /* 0x1C */ - volatile u8 tsrl; /* 0x1D */ - volatile u16 rsrv2; /* 0x1E */ -}; - -struct mpc5xxx_mscan { - volatile u8 canctl0; /* MSCAN + 0x00 */ - volatile u8 canctl1; /* MSCAN + 0x01 */ - volatile u16 rsrv1; /* MSCAN + 0x02 */ - volatile u8 canbtr0; /* MSCAN + 0x04 */ - volatile u8 canbtr1; /* MSCAN + 0x05 */ - volatile u16 rsrv2; /* MSCAN + 0x06 */ - volatile u8 canrflg; /* MSCAN + 0x08 */ - volatile u8 canrier; /* MSCAN + 0x09 */ - volatile u16 rsrv3; /* MSCAN + 0x0A */ - volatile u8 cantflg; /* MSCAN + 0x0C */ - volatile u8 cantier; /* MSCAN + 0x0D */ - volatile u16 rsrv4; /* MSCAN + 0x0E */ - volatile u8 cantarq; /* MSCAN + 0x10 */ - volatile u8 cantaak; /* MSCAN + 0x11 */ - volatile u16 rsrv5; /* MSCAN + 0x12 */ - volatile u8 cantbsel; /* MSCAN + 0x14 */ - volatile u8 canidac; /* MSCAN + 0x15 */ - volatile u16 rsrv6[3]; /* MSCAN + 0x16 */ - volatile u8 canrxerr; /* MSCAN + 0x1C */ - volatile u8 cantxerr; /* MSCAN + 0x1D */ - volatile u16 rsrv7; /* MSCAN + 0x1E */ - volatile u8 canidar0; /* MSCAN + 0x20 */ - volatile u8 canidar1; /* MSCAN + 0x21 */ - volatile u16 rsrv8; /* MSCAN + 0x22 */ - volatile u8 canidar2; /* MSCAN + 0x24 */ - volatile u8 canidar3; /* MSCAN + 0x25 */ - volatile u16 rsrv9; /* MSCAN + 0x26 */ - volatile u8 canidmr0; /* MSCAN + 0x28 */ - volatile u8 canidmr1; /* MSCAN + 0x29 */ - volatile u16 rsrv10; /* MSCAN + 0x2A */ - volatile u8 canidmr2; /* MSCAN + 0x2C */ - volatile u8 canidmr3; /* MSCAN + 0x2D */ - volatile u16 rsrv11; /* MSCAN + 0x2E */ - volatile u8 canidar4; /* MSCAN + 0x30 */ - volatile u8 canidar5; /* MSCAN + 0x31 */ - volatile u16 rsrv12; /* MSCAN + 0x32 */ - volatile u8 canidar6; /* MSCAN + 0x34 */ - volatile u8 canidar7; /* MSCAN + 0x35 */ - volatile u16 rsrv13; /* MSCAN + 0x36 */ - volatile u8 canidmr4; /* MSCAN + 0x38 */ - volatile u8 canidmr5; /* MSCAN + 0x39 */ - volatile u16 rsrv14; /* MSCAN + 0x3A */ - volatile u8 canidmr6; /* MSCAN + 0x3C */ - volatile u8 canidmr7; /* MSCAN + 0x3D */ - volatile u16 rsrv15; /* MSCAN + 0x3E */ - - struct mscan_buffer canrxfg; /* MSCAN + 0x40 */ /* Foreground receive buffer */ - struct mscan_buffer cantxfg; /* MSCAN + 0x60 */ /* Foreground transmit buffer */ - }; - -struct mpc5xxx_xlb { - volatile u8 reserved[0x40]; /* XLB + 0x00 */ - volatile u32 config; /* XLB + 0x40 */ - volatile u32 version; /* XLB + 0x44 */ - volatile u32 status; /* XLB + 0x48 */ - volatile u32 int_enable; /* XLB + 0x4c */ - volatile u32 addr_capture; /* XLB + 0x50 */ - volatile u32 bus_sig_capture; /* XLB + 0x54 */ - volatile u32 addr_timeout; /* XLB + 0x58 */ - volatile u32 data_timeout; /* XLB + 0x5c */ - volatile u32 bus_act_timeout; /* XLB + 0x60 */ - volatile u32 master_pri_enable; /* XLB + 0x64 */ - volatile u32 master_priority; /* XLB + 0x68 */ - volatile u32 base_address; /* XLB + 0x6c */ - volatile u32 snoop_window; /* XLB + 0x70 */ -}; - -struct pci_controller; - -/* function prototypes */ -void loadtask(int basetask, int tasks); -void pci_mpc5xxx_init(struct pci_controller *); - -#endif /* __ASSEMBLY__ */ - -#endif /* __ASMPPC_MPC5XXX_H */ diff --git a/include/mpc5xxx_sdma.h b/include/mpc5xxx_sdma.h deleted file mode 100644 index 821ac0ac62..0000000000 --- a/include/mpc5xxx_sdma.h +++ /dev/null @@ -1,93 +0,0 @@ -/* - * (C) Copyright 2003 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * This file is based on code - * (C) Copyright Motorola, Inc., 2000 - * - * odin smartdma header file - */ - -#ifndef __MPC5XXX_SDMA_H -#define __MPC5XXX_SDMA_H - -#include <common.h> -#include <mpc5xxx.h> - -/* Task number assignment */ -#define FEC_RECV_TASK_NO 0 -#define FEC_XMIT_TASK_NO 1 - -/*---------------------------------------------------------------------*/ - -/* Stuff for Ethernet Tx/Rx tasks */ - -/*---------------------------------------------------------------------*/ - -/* Layout of Ethernet controller Parameter SRAM area: ----------------------------------------------------------------- -0x00: TBD_BASE, base address of TX BD ring -0x04: TBD_NEXT, address of next TX BD to be processed -0x08: RBD_BASE, base address of RX BD ring -0x0C: RBD_NEXT, address of next RX BD to be processed ---------------------------------------------------------------- -ALL PARAMETERS ARE ALL LONGWORDS (FOUR BYTES EACH). -*/ - -/* base address of SRAM area to store parameters used by Ethernet tasks */ -#define FEC_PARAM_BASE (MPC5XXX_SRAM + 0x0800) - -/* base address of SRAM area for buffer descriptors */ -#define FEC_BD_BASE (MPC5XXX_SRAM + 0x0820) - -/*---------------------------------------------------------------------*/ - -/* common shortcuts used by driver C code */ - -/*---------------------------------------------------------------------*/ - -/* Disable SmartDMA task */ -#define SDMA_TASK_DISABLE(tasknum) \ -{ \ - volatile ushort *tcr = (ushort *)(MPC5XXX_SDMA + 0x0000001c + 2 * tasknum); \ - *tcr = (*tcr) & (~0x8000); \ -} - -/* Enable SmartDMA task */ -#define SDMA_TASK_ENABLE(tasknum) \ -{ \ - volatile ushort *tcr = (ushort *) (MPC5XXX_SDMA + 0x0000001c + 2 * tasknum); \ - *tcr = (*tcr) | 0x8000; \ -} - -/* Enable interrupt */ -#define SDMA_INT_ENABLE(tasknum) \ -{ \ - struct mpc5xxx_sdma *sdma = (struct mpc5xxx_sdma *)MPC5XXX_SDMA; \ - sdma->IntMask &= ~(1 << tasknum); \ -} - -/* Disable interrupt */ -#define SDMA_INT_DISABLE(tasknum) \ -{ \ - struct mpc5xxx_sdma *sdma = (struct mpc5xxx_sdma *)MPC5XXX_SDMA; \ - sdma->IntMask |= (1 << tasknum); \ -} - - -/* Clear interrupt pending bits */ -#define SDMA_CLEAR_IEVENT(tasknum) \ -{ \ - struct mpc5xxx_sdma *sdma = (struct mpc5xxx_sdma *)MPC5XXX_SDMA; \ - sdma->IntPend = (1 << tasknum); \ -} - -/* get interrupt pending bit of a task */ -#define SDMA_GET_PENDINGBIT(tasknum) \ - ((*(vu_long *)(MPC5XXX_SDMA + 0x14)) & (1<<(tasknum))) - -/* get interrupt mask bit of a task */ -#define SDMA_GET_MASKBIT(tasknum) \ - ((*(vu_long *)(MPC5XXX_SDMA + 0x18)) & (1<<(tasknum))) - -#endif /* __MPC5XXX_SDMA_H */ diff --git a/include/netdev.h b/include/netdev.h index ced761b9ce..c06b90886b 100644 --- a/include/netdev.h +++ b/include/netdev.h @@ -57,8 +57,6 @@ int lpc32xx_eth_initialize(bd_t *bis); int macb_eth_initialize(int id, void *regs, unsigned int phy_addr); int mcdmafec_initialize(bd_t *bis); int mcffec_initialize(bd_t *bis); -int mpc512x_fec_initialize(bd_t *bis); -int mpc5xxx_fec_initialize(bd_t *bis); int mvgbe_initialize(bd_t *bis); int mvneta_initialize(bd_t *bis, int base_addr, int devnum, int phy_addr); int natsemi_initialize(bd_t *bis); diff --git a/include/post.h b/include/post.h index 94d5b42d2c..201d7e46b9 100644 --- a/include/post.h +++ b/include/post.h @@ -22,14 +22,7 @@ #define _POST_WORD_ADDR CONFIG_SYS_POST_WORD_ADDR #else
-#ifdef CONFIG_MPC5xxx -#define _POST_WORD_ADDR (MPC5XXX_SRAM + MPC5XXX_SRAM_POST_SIZE) - -#elif defined(CONFIG_MPC512X) -#define _POST_WORD_ADDR \ - (CONFIG_SYS_SRAM_BASE + CONFIG_SYS_GBL_DATA_OFFSET - 0x4) - -#elif defined(CONFIG_8xx) +#if defined(CONFIG_8xx) #define _POST_WORD_ADDR \ (((immap_t *)CONFIG_SYS_IMMR)->im_cpm.cp_dpmem + CPM_POST_WORD_ADDR)
diff --git a/include/ppc_asm.tmpl b/include/ppc_asm.tmpl index b317573bff..18783340d9 100644 --- a/include/ppc_asm.tmpl +++ b/include/ppc_asm.tmpl @@ -125,11 +125,6 @@
#define PLPRCR 0x00000284
-#elif defined(CONFIG_MPC5xxx) - -#define HID0_ICE_BITPOS 16 -#define HID0_DCE_BITPOS 17 - #endif
#define curptr r2 diff --git a/include/serial.h b/include/serial.h index 9a5478a8f3..a5b555d14c 100644 --- a/include/serial.h +++ b/include/serial.h @@ -29,9 +29,8 @@ extern struct serial_device *default_serial_console(void); #if defined(CONFIG_405GP) || \ defined(CONFIG_405EP) || defined(CONFIG_405EZ) || \ defined(CONFIG_405EX) || defined(CONFIG_440) || \ - defined(CONFIG_MPC5xxx) || \ defined(CONFIG_MPC83xx) || defined(CONFIG_MPC85xx) || \ - defined(CONFIG_MPC86xx) || defined(CONFIG_SYS_SC520) || \ + defined(CONFIG_MPC86xx) || \ defined(CONFIG_TEGRA) || defined(CONFIG_SYS_COREBOOT) || \ defined(CONFIG_MICROBLAZE) extern struct serial_device serial0_device; @@ -69,13 +68,6 @@ extern int usbtty_tstc(void);
#endif /* CONFIG_USB_TTY */
-#if defined(CONFIG_MPC512X) -extern struct stdio_dev *open_port(int num, int baudrate); -extern int close_port(int num); -extern int write_port(struct stdio_dev *port, char *buf); -extern int read_port(struct stdio_dev *port, char *buf, int size); -#endif - struct udevice;
/** @@ -192,7 +184,6 @@ void marvell_serial_initialize(void); void max3100_serial_initialize(void); void mcf_serial_initialize(void); void ml2_serial_initialize(void); -void mpc512x_serial_initialize(void); void mpc85xx_serial_initialize(void); void mpc8xx_serial_initialize(void); void mxc_serial_initialize(void); diff --git a/include/status_led.h b/include/status_led.h index e377346967..8178e93ebf 100644 --- a/include/status_led.h +++ b/include/status_led.h @@ -56,10 +56,6 @@ void status_led_set (int led, int state); * filling this file up with lots of custom board stuff. */
-#elif defined(CONFIG_V38B) - -# define STATUS_LED_ACTIVE 0 /* LED on for bit == 0 */ - #elif defined(CONFIG_LED_STATUS_BOARD_SPECIFIC) /* led_id_t is unsigned long mask */ typedef unsigned long led_id_t; diff --git a/include/usb/ehci-ci.h b/include/usb/ehci-ci.h index 8f3437a208..847b6989a0 100644 --- a/include/usb/ehci-ci.h +++ b/include/usb/ehci-ci.h @@ -156,9 +156,6 @@ #elif defined(CONFIG_MPC85xx) #define CONFIG_SYS_FSL_USB1_ADDR CONFIG_SYS_MPC85xx_USB1_ADDR #define CONFIG_SYS_FSL_USB2_ADDR CONFIG_SYS_MPC85xx_USB2_ADDR -#elif defined(CONFIG_MPC512X) -#define CONFIG_SYS_FSL_USB1_ADDR CONFIG_SYS_MPC512x_USB1_ADDR -#define CONFIG_SYS_FSL_USB2_ADDR 0 #elif defined(CONFIG_ARCH_LS1021A) #define CONFIG_SYS_FSL_USB1_ADDR CONFIG_SYS_EHCI_USB1_ADDR #define CONFIG_SYS_FSL_USB2_ADDR 0 diff --git a/include/watchdog.h b/include/watchdog.h index e7871e3875..c1e7b7aeb3 100644 --- a/include/watchdog.h +++ b/include/watchdog.h @@ -77,11 +77,6 @@ int init_func_watchdog_reset(void); void reset_8xx_watchdog(volatile immap_t *immr); #endif
-/* MPC 5xxx */ -#if defined(CONFIG_MPC5xxx) && !defined(__ASSEMBLY__) - void reset_5xxx_watchdog(void); -#endif - /* AMCC 4xx */ #if defined(CONFIG_4xx) && !defined(__ASSEMBLY__) void reset_4xx_watchdog(void); diff --git a/post/board/pdm360ng/Makefile b/post/board/pdm360ng/Makefile deleted file mode 100644 index 9aa96a1f6a..0000000000 --- a/post/board/pdm360ng/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# -# (C) Copyright 2010 DENX Software Engineering -# Anatolij Gustschin, agust@denx.de. -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y += coproc_com.o diff --git a/post/board/pdm360ng/coproc_com.c b/post/board/pdm360ng/coproc_com.c deleted file mode 100644 index e11b69bdc7..0000000000 --- a/post/board/pdm360ng/coproc_com.c +++ /dev/null @@ -1,78 +0,0 @@ -/* - * (C) Copyright 2010 DENX Software Engineering, - * Anatolij Gustschin, agust@denx.de. - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* - * Co-Processor communication POST - */ -#include <common.h> -#include <post.h> -#include <serial.h> - -/* - * Actually the termination sequence of the coprocessor - * commands is "\r\n" (CR LF), but here we use a side effect of - * the putc() routine of the serial driver which checks for LF - * and sends CR before sending LF. Therefore the termination - * sequence in the command below is only "\n". - * "alive" string is the coprocessor response for ping command - * and not a command, therefore it is terminated with "\r\n". - */ -char alive[] = "$AL;38\r\n"; -char ping[] = "$PI;2C\n"; - -int coprocessor_post_test(int flags) -{ - struct stdio_dev *cop_port; - int ret; - char buf[10]; - - /* Test IO Coprocessor communication */ - cop_port = open_port(4, CONFIG_SYS_PDM360NG_COPROC_BAUDRATE); - if (!cop_port) - return -1; - - write_port(cop_port, ping); - udelay(CONFIG_SYS_PDM360NG_COPROC_READ_DELAY); - - memset(buf, 0, sizeof(buf)); - ret = read_port(cop_port, buf, sizeof(buf)); - close_port(4); - if (ret <= 0) { - post_log("Error: Can't read IO Coprocessor port.\n"); - return -1; - } - - if (strcmp(buf, alive)) { - post_log("Error: IO-Cop. resp.: %s\n", buf); - return -1; - } - - /* Test WD Coprocessor communication */ - cop_port = open_port(1, CONFIG_SYS_PDM360NG_COPROC_BAUDRATE); - if (!cop_port) { - post_log("Error: Can't open WD Coprocessor port.\n"); - return -1; - } - - write_port(cop_port, ping); - udelay(CONFIG_SYS_PDM360NG_COPROC_READ_DELAY); - - memset(buf, 0, sizeof(buf)); - ret = read_port(cop_port, buf, sizeof(buf)); - close_port(1); - if (ret <= 0) { - post_log("Error: Can't read WD Coprocessor port.\n"); - return -1; - } - - if (strcmp(buf, alive)) { - post_log("Error: WD-Cop. resp.: %s\n", buf); - return -1; - } - - return 0; -} diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index 46136e6acb..5225819ce6 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -28,7 +28,6 @@ CONFIG_4xx_CONFIG_BLOCKSIZE CONFIG_4xx_CONFIG_I2C_EEPROM_ADDR CONFIG_4xx_CONFIG_I2C_EEPROM_OFFSET CONFIG_4xx_DCACHE -CONFIG_521X CONFIG_533MHZ_MODE CONFIG_64BIT_PHYS_ADDR CONFIG_66 @@ -49,10 +48,6 @@ CONFIG_8xx_GCLK_FREQ CONFIG_8xx_OSCLK CONFIG_A003399_NOR_WORKAROUND CONFIG_A008044_WORKAROUND -CONFIG_A3M071 -CONFIG_A4M072 -CONFIG_A4M2K -CONFIG_AC14XX CONFIG_ACADIA CONFIG_ACX517AKN CONFIG_ACX544AKN @@ -116,8 +111,6 @@ CONFIG_ARCH_USE_BUILTIN_BSWAP CONFIG_ARC_MMU_VER CONFIG_ARC_SERIAL CONFIG_ARC_UART_BASE -CONFIG_ARIA -CONFIG_ARIA_FPGA CONFIG_ARIES_M28_V10 CONFIG_ARM926EJS CONFIG_ARMADA100 @@ -226,7 +219,6 @@ CONFIG_BCM_SF2_ETH_GMAC CONFIG_BD_NUM_CPUS CONFIG_BIOSEMU CONFIG_BITBANGMII_MULTI -CONFIG_BKUP_FLASH CONFIG_BL1_OFFSET CONFIG_BL1_SIZE CONFIG_BL2_OFFSET @@ -239,7 +231,6 @@ CONFIG_BOARDINFO CONFIG_BOARDNAME CONFIG_BOARDNAME_LOCAL CONFIG_BOARD_AXM -CONFIG_BOARD_BOOTCMD CONFIG_BOARD_COMMON CONFIG_BOARD_EARLY_INIT_R CONFIG_BOARD_ECC_SUPPORT @@ -248,7 +239,6 @@ CONFIG_BOARD_H2200 CONFIG_BOARD_IS_OPENRD_BASE CONFIG_BOARD_IS_OPENRD_CLIENT CONFIG_BOARD_IS_OPENRD_ULTIMATE -CONFIG_BOARD_MEM_LIMIT CONFIG_BOARD_NAME CONFIG_BOARD_POSTCLK_INIT CONFIG_BOARD_RESET @@ -333,10 +323,6 @@ CONFIG_BUS_WIDTH CONFIG_BZIP2 CONFIG_CADDY2 CONFIG_CALXEDA_XGMAC -CONFIG_CAM5200 -CONFIG_CAM5200_NIOSFLASH -CONFIG_CANMB -CONFIG_CAN_DRIVER CONFIG_CDP_APPLIANCE_VLAN_TYPE CONFIG_CDP_CAPABILITIES CONFIG_CDP_DEVICE_ID @@ -347,7 +333,6 @@ CONFIG_CDP_POWER_CONSUMPTION CONFIG_CDP_TRIGGER CONFIG_CDP_VERSION CONFIG_CFG_DATA_SECTOR -CONFIG_CFG_FAT CONFIG_CFG_USB CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS CONFIG_CF_DSPI @@ -358,7 +343,6 @@ CONFIG_CF_V3 CONFIG_CF_V4 CONFIG_CF_V4E CONFIG_CHAIN_BOOT_CMD -CONFIG_CHARON CONFIG_CHIP_SELECTS_PER_CTRL CONFIG_CHIP_SELECT_QUAD_CAPABLE CONFIG_CHROMEOS_EXTRA_ENV_SETTINGS @@ -374,7 +358,6 @@ CONFIG_CLK_DEBUG CONFIG_CLOCKS CONFIG_CLOCKS_IN_MHZ CONFIG_CLOCK_SYNTHESIZER -CONFIG_CM5200 CONFIG_CM922T_XA10 CONFIG_CMDLINE_EDITING CONFIG_CMDLINE_PS_SUPPORT @@ -542,13 +525,9 @@ CONFIG_DDR_ECC_ENABLE CONFIG_DDR_ECC_INIT_VIA_DMA CONFIG_DDR_FIXED_SIZE CONFIG_DDR_HCLK -CONFIG_DDR_HYB25D512160BF CONFIG_DDR_II -CONFIG_DDR_K4H511638C CONFIG_DDR_LOG_LEVEL CONFIG_DDR_MB -CONFIG_DDR_MT46V16M16 -CONFIG_DDR_MT46V32M16 CONFIG_DDR_MT47H128M8 CONFIG_DDR_MT47H32M16 CONFIG_DDR_MT47H64M16 @@ -587,8 +566,6 @@ CONFIG_DFU_ENV_SETTINGS CONFIG_DFU_MTD CONFIG_DHCP_MIN_EXT_LEN CONFIG_DIALOG_POWER -CONFIG_DIGSY_MTC -CONFIG_DIGSY_REV5 CONFIG_DIMM_SLOTS_PER_CTLR CONFIG_DIRECT_NOR_BOOT CONFIG_DISABLE_CONSOLE @@ -818,7 +795,6 @@ CONFIG_EXTRA_ENV_ITB CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS CONFIG_EXTRA_ENV_SETTINGS CONFIG_EXTRA_ENV_SETTINGS_COMMON -CONFIG_EXTRA_ENV_SETTINGS_DEVEL CONFIG_EXTRA_ENV_UNLOCK CONFIG_EXTRA_ENV_USBTTY CONFIG_EXT_AHB2AHB_BASE @@ -902,7 +878,6 @@ CONFIG_FLASH_SPANSION_S29WS_N CONFIG_FLASH_VERIFY CONFIG_FMAN_ENET CONFIG_FM_PLAT_CLK_DIV -CONFIG_FO300 CONFIG_FORCE_DDR_DATA_BUS_WIDTH_32 CONFIG_FORMIKE CONFIG_FPGA_COUNT @@ -942,10 +917,6 @@ CONFIG_FSL_LBC CONFIG_FSL_LINFLEXUART CONFIG_FSL_MC9SDZ60 CONFIG_FSL_MEMAC -CONFIG_FSL_NFC_CHIPS -CONFIG_FSL_NFC_SPARE_SIZE -CONFIG_FSL_NFC_WIDTH -CONFIG_FSL_NFC_WRITE_SIZE CONFIG_FSL_NGPIXIS CONFIG_FSL_PCIE_DISABLE_ASPM CONFIG_FSL_PCIE_RESET @@ -1030,7 +1001,6 @@ CONFIG_FTUART010_03_BASE CONFIG_FTWDT010_BASE CONFIG_FTWDT010_WATCHDOG CONFIG_FUNC_ISRAM_ADDR -CONFIG_FWUPDATE_DEBUG CONFIG_FZOTG266HD0A_BASE CONFIG_GATEWAYIP CONFIG_GCOV_KERNEL @@ -1285,10 +1255,6 @@ CONFIG_IDE_SWAP_IO CONFIG_IDS8313 CONFIG_IDT8T49N222A CONFIG_ID_EEPROM -CONFIG_IFM_DEFAULT_ENV_NEW -CONFIG_IFM_DEFAULT_ENV_OLD -CONFIG_IFM_DEFAULT_ENV_SETTINGS -CONFIG_IFM_SENSOR_TYPE CONFIG_IMA CONFIG_IMAGE_FORMAT_LEGACY CONFIG_IMX @@ -1308,7 +1274,6 @@ CONFIG_INI_CASE_INSENSITIVE CONFIG_INI_MAX_LINE CONFIG_INI_MAX_NAME CONFIG_INI_MAX_SECTION -CONFIG_INKA4X0 CONFIG_INTEGRITY CONFIG_INTEL_ICH6_GPIO CONFIG_INTERRUPTS @@ -1328,7 +1293,6 @@ CONFIG_IPADDR2 CONFIG_IPAM390_GPIO_BOOTMODE CONFIG_IPAM390_GPIO_LED_GREEN CONFIG_IPAM390_GPIO_LED_RED -CONFIG_IPEK01 CONFIG_IPROC CONFIG_IPUV3_CLK CONFIG_IP_DEFRAG @@ -1354,7 +1318,6 @@ CONFIG_JFFS2_PART_SIZE CONFIG_JFFS2_SUMMARY CONFIG_JRSTARTR_JR0 CONFIG_JTAG_CONSOLE -CONFIG_JUPITER CONFIG_KASAN CONFIG_KATMAI CONFIG_KCLK_DIS @@ -1617,7 +1580,6 @@ CONFIG_MCFTMR CONFIG_MCFUART CONFIG_MCLK_DIS CONFIG_MDIO_TIMEOUT -CONFIG_MECP5123 CONFIG_MEMSIZE CONFIG_MEMSIZE_IN_BYTES CONFIG_MEMSIZE_MASK @@ -1636,7 +1598,6 @@ CONFIG_MIIM_ADDRESS CONFIG_MII_DEFAULT_TSEC CONFIG_MII_INIT CONFIG_MII_SUPPRESS_PREAMBLE -CONFIG_MINIFAP CONFIG_MIPS_HUGE_TLB_SUPPORT CONFIG_MIPS_MT_FPAFF CONFIG_MIRQ_EN @@ -1664,16 +1625,7 @@ CONFIG_MMC_TRACE CONFIG_MMU CONFIG_MODVERSIONS CONFIG_MONITOR_IS_IN_RAM -CONFIG_MOTIONPRO CONFIG_MP -CONFIG_MPC5121ADS -CONFIG_MPC5121ADS_REV2 -CONFIG_MPC512x_FEC -CONFIG_MPC5200 -CONFIG_MPC5200_DDR -CONFIG_MPC5xxx_FEC -CONFIG_MPC5xxx_FEC_MII10 -CONFIG_MPC5xxx_FEC_MII100 CONFIG_MPC823 CONFIG_MPC8308 CONFIG_MPC8308RDB @@ -1723,7 +1675,6 @@ CONFIG_MPC8XX_LCD CONFIG_MPC8xxx_DISABLE_BPTR CONFIG_MPLL_FREQ CONFIG_MPR2 -CONFIG_MPX5200 CONFIG_MP_CLK_FREQ CONFIG_MS7720SE CONFIG_MS7722SE @@ -1755,7 +1706,6 @@ CONFIG_MTD_UBI_DEBUG_PARANOID CONFIG_MTD_UBI_GLUEBI CONFIG_MTD_UBI_MODULE CONFIG_MULTI_CS -CONFIG_MUNICES CONFIG_MUSB_HOST CONFIG_MVEBU_MMC CONFIG_MVGBE @@ -1828,7 +1778,6 @@ CONFIG_NAND_KMETER1 CONFIG_NAND_LPC32XX_MLC CONFIG_NAND_LPC32XX_SLC CONFIG_NAND_MODE_REG -CONFIG_NAND_MPC5121_NFC CONFIG_NAND_MXC CONFIG_NAND_MXC_V1_1 CONFIG_NAND_NDFC @@ -1892,7 +1841,6 @@ CONFIG_OF_IDE_FIXUP CONFIG_OF_SPI CONFIG_OF_SPI_FLASH CONFIG_OF_STDOUT_PATH -CONFIG_OF_SUPPORT_OLD_DEVICE_TREES CONFIG_OMAP_EHCI_PHY1_RESET_GPIO CONFIG_OMAP_EHCI_PHY2_RESET_GPIO CONFIG_OMAP_EHCI_PHY3_RESET_GPIO @@ -1978,7 +1926,6 @@ CONFIG_PCMCIA_SLOT_B CONFIG_PCNET CONFIG_PCNET_79C973 CONFIG_PCNET_79C975 -CONFIG_PDM360NG CONFIG_PEN_ADDR_BIG_ENDIAN CONFIG_PERIF1_FREQ CONFIG_PERIF2_FREQ @@ -1987,7 +1934,6 @@ CONFIG_PERIF4_FREQ CONFIG_PHY1_ADDR CONFIG_PHY2_ADDR CONFIG_PHY3_ADDR -CONFIG_PHYCORE_MPC5200B_TINY CONFIG_PHYSMEM CONFIG_PHY_ADDR CONFIG_PHY_BASE_ADR @@ -2140,9 +2086,6 @@ CONFIG_PS2KBD CONFIG_PS2MULT CONFIG_PS2MULT_DELAY CONFIG_PS2SERIAL -CONFIG_PSC3_USB -CONFIG_PSC_CONSOLE -CONFIG_PSC_CONSOLE2 CONFIG_PSRAM_SCFG CONFIG_PWM CONFIG_PWM_IMX @@ -2265,7 +2208,6 @@ CONFIG_RTC_MC13XXX CONFIG_RTC_MC146818 CONFIG_RTC_MCFRRTC CONFIG_RTC_MCP79411 -CONFIG_RTC_MPC5200 CONFIG_RTC_MPC8xx CONFIG_RTC_MV CONFIG_RTC_MXS @@ -2338,7 +2280,6 @@ CONFIG_SDRAM_PPC4xx_IBM_DDR CONFIG_SDRAM_PPC4xx_IBM_DDR2 CONFIG_SDRAM_PPC4xx_IBM_SDRAM CONFIG_SDRC -CONFIG_SDR_MT48LC16M16A2 CONFIG_SD_BOOT_QSPI CONFIG_SECBOOT CONFIG_SECURE_BL1_ONLY @@ -2657,8 +2598,6 @@ CONFIG_STANDALONE_LOAD_ADDR CONFIG_STATIC_BOARD_REV CONFIG_STATIC_RELA CONFIG_STD_DEVICES_SETTINGS -CONFIG_STK52XX -CONFIG_STK52XX_REV100 CONFIG_STM32F4DISCOVERY CONFIG_STM32X7_SERIAL CONFIG_STM32_FLASH @@ -2747,10 +2686,6 @@ CONFIG_SYS_APP1_SIZE CONFIG_SYS_APP2_BASE CONFIG_SYS_APP2_SIZE CONFIG_SYS_ARCH_TIMER -CONFIG_SYS_ARIA_FPGA_BASE -CONFIG_SYS_ARIA_FPGA_SIZE -CONFIG_SYS_ARIA_SRAM_BASE -CONFIG_SYS_ARIA_SRAM_SIZE CONFIG_SYS_ARM_CACHE_WRITETHROUGH CONFIG_SYS_AT91_CPU_NAME CONFIG_SYS_AT91_MAIN_CLOCK @@ -2759,8 +2694,6 @@ CONFIG_SYS_AT91_PLLB CONFIG_SYS_AT91_SLOW_CLOCK CONFIG_SYS_ATA_ALT_OFFSET CONFIG_SYS_ATA_BASE_ADDR -CONFIG_SYS_ATA_CS_ON_I2C2 -CONFIG_SYS_ATA_CS_ON_TIMER01 CONFIG_SYS_ATA_DATA_OFFSET CONFIG_SYS_ATA_IDE0_OFFSET CONFIG_SYS_ATA_IDE1_OFFSET @@ -2816,9 +2749,6 @@ CONFIG_SYS_BOOTCOUNT_ADDR CONFIG_SYS_BOOTCOUNT_BE CONFIG_SYS_BOOTCOUNT_LE CONFIG_SYS_BOOTCOUNT_SINGLEWORD -CONFIG_SYS_BOOTCS_CFG -CONFIG_SYS_BOOTCS_SIZE -CONFIG_SYS_BOOTCS_START CONFIG_SYS_BOOTFILE CONFIG_SYS_BOOTFILE_PREFIX CONFIG_SYS_BOOTMAPSZ @@ -2846,7 +2776,6 @@ CONFIG_SYS_BR6_8M CONFIG_SYS_BR6_PRELIM CONFIG_SYS_BR7_PRELIM CONFIG_SYS_BRGCLK_PRESCALE -CONFIG_SYS_BRIGHTNESS CONFIG_SYS_BUSCLK CONFIG_SYS_CACHELINE_SHIFT CONFIG_SYS_CACHE_ACR0 @@ -2879,7 +2808,6 @@ CONFIG_SYS_CFI_FLASH_CONFIG_REGS CONFIG_SYS_CFI_FLASH_STATUS_POLL CONFIG_SYS_CF_BASE CONFIG_SYS_CF_INTC_REG1 -CONFIG_SYS_CF_SIZE CONFIG_SYS_CH7301_I2C CONFIG_SYS_CKEN CONFIG_SYS_CLK @@ -2936,7 +2864,6 @@ CONFIG_SYS_CPRI_CLK CONFIG_SYS_CPUSPEED CONFIG_SYS_CPU_CLK CONFIG_SYS_CS0_BASE -CONFIG_SYS_CS0_CFG CONFIG_SYS_CS0_CTRL CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_CS0_FTIM1 @@ -2944,9 +2871,7 @@ CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_CS0_MASK CONFIG_SYS_CS0_SIZE -CONFIG_SYS_CS0_START CONFIG_SYS_CS1_BASE -CONFIG_SYS_CS1_CFG CONFIG_SYS_CS1_CTRL CONFIG_SYS_CS1_FLASH_BASE CONFIG_SYS_CS1_FTIM0 @@ -2954,10 +2879,7 @@ CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_CS1_MASK -CONFIG_SYS_CS1_SIZE -CONFIG_SYS_CS1_START CONFIG_SYS_CS2_BASE -CONFIG_SYS_CS2_CFG CONFIG_SYS_CS2_CTRL CONFIG_SYS_CS2_FLASH_BASE CONFIG_SYS_CS2_FTIM0 @@ -2965,10 +2887,7 @@ CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_CS2_MASK -CONFIG_SYS_CS2_SIZE -CONFIG_SYS_CS2_START CONFIG_SYS_CS3_BASE -CONFIG_SYS_CS3_CFG CONFIG_SYS_CS3_CTRL CONFIG_SYS_CS3_FLASH_BASE CONFIG_SYS_CS3_FTIM0 @@ -2976,10 +2895,7 @@ CONFIG_SYS_CS3_FTIM1 CONFIG_SYS_CS3_FTIM2 CONFIG_SYS_CS3_FTIM3 CONFIG_SYS_CS3_MASK -CONFIG_SYS_CS3_SIZE -CONFIG_SYS_CS3_START CONFIG_SYS_CS4_BASE -CONFIG_SYS_CS4_CFG CONFIG_SYS_CS4_CTRL CONFIG_SYS_CS4_FLASH_BASE CONFIG_SYS_CS4_FTIM0 @@ -2987,10 +2903,7 @@ CONFIG_SYS_CS4_FTIM1 CONFIG_SYS_CS4_FTIM2 CONFIG_SYS_CS4_FTIM3 CONFIG_SYS_CS4_MASK -CONFIG_SYS_CS4_SIZE -CONFIG_SYS_CS4_START CONFIG_SYS_CS5_BASE -CONFIG_SYS_CS5_CFG CONFIG_SYS_CS5_CTRL CONFIG_SYS_CS5_FLASH_BASE CONFIG_SYS_CS5_FTIM0 @@ -2998,28 +2911,20 @@ CONFIG_SYS_CS5_FTIM1 CONFIG_SYS_CS5_FTIM2 CONFIG_SYS_CS5_FTIM3 CONFIG_SYS_CS5_MASK -CONFIG_SYS_CS5_SIZE -CONFIG_SYS_CS5_START CONFIG_SYS_CS6_BASE -CONFIG_SYS_CS6_CFG CONFIG_SYS_CS6_CTRL CONFIG_SYS_CS6_FTIM0 CONFIG_SYS_CS6_FTIM1 CONFIG_SYS_CS6_FTIM2 CONFIG_SYS_CS6_FTIM3 CONFIG_SYS_CS6_MASK -CONFIG_SYS_CS6_SIZE -CONFIG_SYS_CS6_START CONFIG_SYS_CS7_BASE -CONFIG_SYS_CS7_CFG CONFIG_SYS_CS7_CTRL CONFIG_SYS_CS7_FTIM0 CONFIG_SYS_CS7_FTIM1 CONFIG_SYS_CS7_FTIM2 CONFIG_SYS_CS7_FTIM3 CONFIG_SYS_CS7_MASK -CONFIG_SYS_CS7_SIZE -CONFIG_SYS_CS7_START CONFIG_SYS_CSOR0 CONFIG_SYS_CSOR0_EXT CONFIG_SYS_CSOR1 @@ -3056,10 +2961,6 @@ CONFIG_SYS_CSPR6 CONFIG_SYS_CSPR6_EXT CONFIG_SYS_CSPR7 CONFIG_SYS_CSPR7_EXT -CONFIG_SYS_CS_ALETIMING -CONFIG_SYS_CS_BURST -CONFIG_SYS_CS_DEADCYCLE -CONFIG_SYS_CS_HOLDCYCLE CONFIG_SYS_DA850_CS2CFG CONFIG_SYS_DA850_CS3CFG CONFIG_SYS_DA850_DDR2_DDRPHYCR @@ -3148,15 +3049,6 @@ CONFIG_SYS_DDR2_TIMING_1 CONFIG_SYS_DDR2_TIMING_2 CONFIG_SYS_DDRCDR CONFIG_SYS_DDRCDR_VALUE -CONFIG_SYS_DDRCMD_EM2 -CONFIG_SYS_DDRCMD_EM3 -CONFIG_SYS_DDRCMD_EN_DLL -CONFIG_SYS_DDRCMD_NOP -CONFIG_SYS_DDRCMD_OCD_DEFAULT -CONFIG_SYS_DDRCMD_OCD_EXIT -CONFIG_SYS_DDRCMD_PCHG_ALL -CONFIG_SYS_DDRCMD_RES_DLL -CONFIG_SYS_DDRCMD_RFSH CONFIG_SYS_DDRD CONFIG_SYS_DDRTC CONFIG_SYS_DDRUA @@ -3297,7 +3189,6 @@ CONFIG_SYS_DEBUG_SERVER_FW_ADDR CONFIG_SYS_DEBUG_SERVER_FW_IN_NOR CONFIG_SYS_DECREMENT_PATTERNS CONFIG_SYS_DEFAULT_LPDDR2_TIMINGS -CONFIG_SYS_DEFAULT_MBAR CONFIG_SYS_DEFAULT_VIDEO_MODE CONFIG_SYS_DEF_EEPROM_ADDR CONFIG_SYS_DELAYED_ICACHE @@ -3311,7 +3202,6 @@ CONFIG_SYS_DIMM_SLOTS_PER_CTLR CONFIG_SYS_DIRECT_FLASH_NFS CONFIG_SYS_DIRECT_FLASH_TFTP CONFIG_SYS_DISCOVER_PHY -CONFIG_SYS_DISP_CHR_RAM CONFIG_SYS_DIU_ADDR CONFIG_SYS_DM36x_PINMUX0 CONFIG_SYS_DM36x_PINMUX1 @@ -3386,9 +3276,6 @@ CONFIG_SYS_EHCI_USB1_ADDR CONFIG_SYS_ELBC_BASE CONFIG_SYS_ELBC_BASE_PHYS CONFIG_SYS_ELO3_DMA3 -CONFIG_SYS_ELPIDA_INIT_DEV_OP -CONFIG_SYS_ELPIDA_OCD_EXIT -CONFIG_SYS_ELPIDA_RES_DLL CONFIG_SYS_EMAC_TI_CLKDIV CONFIG_SYS_EMIF_PRECALCULATED_TIMING_REGS CONFIG_SYS_ENABLE_PADS_ALL @@ -3459,7 +3346,6 @@ CONFIG_SYS_FLASH_BASE1 CONFIG_SYS_FLASH_BASE2 CONFIG_SYS_FLASH_BASE_1 CONFIG_SYS_FLASH_BASE_2 -CONFIG_SYS_FLASH_BASE_CS1 CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE_PHYS_EARLY CONFIG_SYS_FLASH_BASE_PHYS_H @@ -3988,14 +3874,11 @@ CONFIG_SYS_GPIO_CRAM_ADV CONFIG_SYS_GPIO_CRAM_CLK CONFIG_SYS_GPIO_CRAM_CRE CONFIG_SYS_GPIO_CRAM_WAIT -CONFIG_SYS_GPIO_DATADIR -CONFIG_SYS_GPIO_DATAVALUE CONFIG_SYS_GPIO_DSPIC_READY CONFIG_SYS_GPIO_EEPROM_EXT_WP CONFIG_SYS_GPIO_EEPROM_INT_WP CONFIG_SYS_GPIO_EEPROM_WP CONFIG_SYS_GPIO_EN -CONFIG_SYS_GPIO_ENABLE CONFIG_SYS_GPIO_EREADY CONFIG_SYS_GPIO_FLASH_WP CONFIG_SYS_GPIO_FUNC @@ -4013,7 +3896,6 @@ CONFIG_SYS_GPIO_LSB_ENABLE CONFIG_SYS_GPIO_M66EN CONFIG_SYS_GPIO_MONARCH_N CONFIG_SYS_GPIO_ODR -CONFIG_SYS_GPIO_OPENDRAIN CONFIG_SYS_GPIO_OR CONFIG_SYS_GPIO_OUT CONFIG_SYS_GPIO_PCIE_CLKREQ @@ -4038,9 +3920,6 @@ CONFIG_SYS_GPSR0_VAL CONFIG_SYS_GPSR1_VAL CONFIG_SYS_GPSR2_VAL CONFIG_SYS_GPSR3_VAL -CONFIG_SYS_GPS_PORT_CONFIG -CONFIG_SYS_GPS_PORT_CONFIG_1 -CONFIG_SYS_GPS_PORT_CONFIG_2 CONFIG_SYS_HALT_BEFOR_RAM_JUMP CONFIG_SYS_HELP_CMD_WIDTH CONFIG_SYS_HID0_FINAL @@ -4141,7 +4020,6 @@ CONFIG_SYS_I2C_IHS_SPEED_2_1 CONFIG_SYS_I2C_IHS_SPEED_3 CONFIG_SYS_I2C_IHS_SPEED_3_1 CONFIG_SYS_I2C_INIT_BOARD -CONFIG_SYS_I2C_IO CONFIG_SYS_I2C_KEYBD_ADDR CONFIG_SYS_I2C_KONA CONFIG_SYS_I2C_LDI_ADDR @@ -4322,10 +4200,8 @@ CONFIG_SYS_INTSRAM CONFIG_SYS_INTSRAMSZ CONFIG_SYS_INT_FLASH_BASE CONFIG_SYS_INT_FLASH_ENABLE -CONFIG_SYS_IOCTRL_MUX_DDR CONFIG_SYS_IO_BASE CONFIG_SYS_IPBCLK_EQUALS_XLBCLK -CONFIG_SYS_IPBSPEED_133 CONFIG_SYS_IR_REG_BASE_ADDR CONFIG_SYS_ISA_BASE CONFIG_SYS_ISA_IO @@ -4442,8 +4318,6 @@ CONFIG_SYS_LOCAL_CONF_REGS CONFIG_SYS_LONGHELP CONFIG_SYS_LOW CONFIG_SYS_LOWBOOT -CONFIG_SYS_LOWBOOT16 -CONFIG_SYS_LOWBOOT32 CONFIG_SYS_LOWMEM_BASE CONFIG_SYS_LOW_RES_TIMER CONFIG_SYS_LPAE_SDRAM_BASE @@ -4504,7 +4378,6 @@ CONFIG_SYS_MAX_MTD_BANKS CONFIG_SYS_MAX_NAND_CHIPS CONFIG_SYS_MAX_NAND_DEVICE CONFIG_SYS_MAX_PCI_EPS -CONFIG_SYS_MAX_RAM_SIZE CONFIG_SYS_MB862xx_CCF CONFIG_SYS_MB862xx_MMR CONFIG_SYS_MBAR @@ -4529,41 +4402,6 @@ CONFIG_SYS_MCMEM1_VAL CONFIG_SYS_MDC1_PIN CONFIG_SYS_MDCNFG_VAL CONFIG_SYS_MDC_PIN -CONFIG_SYS_MDDRCGRP_HIPRIO_CFG -CONFIG_SYS_MDDRCGRP_LUT0_AL -CONFIG_SYS_MDDRCGRP_LUT0_AU -CONFIG_SYS_MDDRCGRP_LUT0_ML -CONFIG_SYS_MDDRCGRP_LUT0_MU -CONFIG_SYS_MDDRCGRP_LUT1_AL -CONFIG_SYS_MDDRCGRP_LUT1_AU -CONFIG_SYS_MDDRCGRP_LUT1_ML -CONFIG_SYS_MDDRCGRP_LUT1_MU -CONFIG_SYS_MDDRCGRP_LUT2_AL -CONFIG_SYS_MDDRCGRP_LUT2_AU -CONFIG_SYS_MDDRCGRP_LUT2_ML -CONFIG_SYS_MDDRCGRP_LUT2_MU -CONFIG_SYS_MDDRCGRP_LUT3_AL -CONFIG_SYS_MDDRCGRP_LUT3_AU -CONFIG_SYS_MDDRCGRP_LUT3_ML -CONFIG_SYS_MDDRCGRP_LUT3_MU -CONFIG_SYS_MDDRCGRP_LUT4_AL -CONFIG_SYS_MDDRCGRP_LUT4_AU -CONFIG_SYS_MDDRCGRP_LUT4_ML -CONFIG_SYS_MDDRCGRP_LUT4_MU -CONFIG_SYS_MDDRCGRP_PM_CFG1 -CONFIG_SYS_MDDRCGRP_PM_CFG2 -CONFIG_SYS_MDDRC_SYS_CFG -CONFIG_SYS_MDDRC_SYS_CFG_ALT1 -CONFIG_SYS_MDDRC_SYS_CFG_ELPIDA -CONFIG_SYS_MDDRC_SYS_CFG_EN -CONFIG_SYS_MDDRC_TIME_CFG0 -CONFIG_SYS_MDDRC_TIME_CFG0_ALT1 -CONFIG_SYS_MDDRC_TIME_CFG1 -CONFIG_SYS_MDDRC_TIME_CFG1_ALT1 -CONFIG_SYS_MDDRC_TIME_CFG1_ELPIDA -CONFIG_SYS_MDDRC_TIME_CFG2 -CONFIG_SYS_MDDRC_TIME_CFG2_ALT1 -CONFIG_SYS_MDDRC_TIME_CFG2_ELPIDA CONFIG_SYS_MDIO1_OFFSET CONFIG_SYS_MDIO1_PIN CONFIG_SYS_MDIO_BASE_ADDR @@ -4585,18 +4423,6 @@ CONFIG_SYS_MEM_SIZE CONFIG_SYS_MEM_TOP_HIDE CONFIG_SYS_MFD CONFIG_SYS_MHZ -CONFIG_SYS_MICRON_BMODE -CONFIG_SYS_MICRON_BMODE_PARAM -CONFIG_SYS_MICRON_BMODE_RSTDLL -CONFIG_SYS_MICRON_EMODE -CONFIG_SYS_MICRON_EMODE2 -CONFIG_SYS_MICRON_EMODE3 -CONFIG_SYS_MICRON_EMODE_PARAM -CONFIG_SYS_MICRON_EMR -CONFIG_SYS_MICRON_EMR2 -CONFIG_SYS_MICRON_EMR3 -CONFIG_SYS_MICRON_EMR_OCD -CONFIG_SYS_MICRON_INIT_DEV_OP CONFIG_SYS_MII_MODE CONFIG_SYS_MIPS_CACHE_MODE CONFIG_SYS_MIPS_TIMER_FREQ @@ -4623,10 +4449,6 @@ CONFIG_SYS_MONITOR_BASE_EARLY CONFIG_SYS_MONITOR_LEN CONFIG_SYS_MONITOR_SEC CONFIG_SYS_MOR_VAL -CONFIG_SYS_MPC512X_CLKIN -CONFIG_SYS_MPC512x_USB1_ADDR -CONFIG_SYS_MPC512x_USB1_OFFSET -CONFIG_SYS_MPC5XXX_CLKIN CONFIG_SYS_MPC83xx_DMA_ADDR CONFIG_SYS_MPC83xx_DMA_OFFSET CONFIG_SYS_MPC83xx_ESDHC_ADDR @@ -4706,8 +4528,6 @@ CONFIG_SYS_MPC8xxx_DDR_OFFSET CONFIG_SYS_MPC8xxx_GUTS_ADDR CONFIG_SYS_MPC8xxx_PIC_ADDR CONFIG_SYS_MPC92469AC -CONFIG_SYS_MPEG_BASE -CONFIG_SYS_MPEG_SIZE CONFIG_SYS_MRAM_BASE CONFIG_SYS_MRAM_SIZE CONFIG_SYS_MRS_OFFS @@ -5059,7 +4879,6 @@ CONFIG_SYS_PCI2_MMIO_PHYS CONFIG_SYS_PCI2_MMIO_SIZE CONFIG_SYS_PCI64_MEMORY_BUS CONFIG_SYS_PCI9054_IOBASE -CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2 CONFIG_SYS_PCIE CONFIG_SYS_PCIE0_CFGBASE CONFIG_SYS_PCIE0_CFGMASK @@ -5157,7 +4976,6 @@ CONFIG_SYS_PCIE_MMAP_SIZE CONFIG_SYS_PCIE_NR_PORTS CONFIG_SYS_PCIE_PHYS CONFIG_SYS_PCIE_VIRT -CONFIG_SYS_PCISPEED_66 CONFIG_SYS_PCI_64BIT CONFIG_SYS_PCI_BAR0 CONFIG_SYS_PCI_BAR1 @@ -5259,10 +5077,7 @@ CONFIG_SYS_PCMCIA_POR4 CONFIG_SYS_PCMCIA_POR5 CONFIG_SYS_PCMCIA_POR6 CONFIG_SYS_PCMCIA_POR7 -CONFIG_SYS_PCMCIA_TIMING CONFIG_SYS_PDCNT -CONFIG_SYS_PDM360NG_COPROC_BAUDRATE -CONFIG_SYS_PDM360NG_COPROC_READ_DELAY CONFIG_SYS_PEHLPAR CONFIG_SYS_PEPAR CONFIG_SYS_PERIPHERAL_BASE @@ -5353,10 +5168,6 @@ CONFIG_SYS_PPC_DDR_WIMGE CONFIG_SYS_PQSPAR CONFIG_SYS_PRELIM_OR_AM CONFIG_SYS_PROMPT_HUSH_PS2 -CONFIG_SYS_PSC1 -CONFIG_SYS_PSC3 -CONFIG_SYS_PSC4 -CONFIG_SYS_PSC6 CONFIG_SYS_PSDPAR CONFIG_SYS_PSSR_VAL CONFIG_SYS_PTA_PER_CLK @@ -5538,7 +5349,6 @@ CONFIG_SYS_SDRAM_CL CONFIG_SYS_SDRAM_CONF1HB CONFIG_SYS_SDRAM_CONF1LL CONFIG_SYS_SDRAM_CONFPATHB -CONFIG_SYS_SDRAM_CS1 CONFIG_SYS_SDRAM_CTP CONFIG_SYS_SDRAM_CTRL CONFIG_SYS_SDRAM_DRVSTRENGTH @@ -5713,8 +5523,6 @@ CONFIG_SYS_TEMP_STACK_OCM CONFIG_SYS_TEXT_ADDR CONFIG_SYS_TEXT_BASE_NOR CONFIG_SYS_TEXT_BASE_SPL -CONFIG_SYS_TFP410_ADDR -CONFIG_SYS_TFP410_BUS CONFIG_SYS_TIMERBASE CONFIG_SYS_TIMER_BASE CONFIG_SYS_TIMER_COUNTER @@ -5870,8 +5678,6 @@ CONFIG_SYS_VCXK_RESET_PORT CONFIG_SYS_VGA_RAM_EN CONFIG_SYS_VIDEO CONFIG_SYS_VIDEO_LOGO_MAX_SIZE -CONFIG_SYS_VPC3_BASE -CONFIG_SYS_VPC3_SIZE CONFIG_SYS_VSC7385_BASE CONFIG_SYS_VSC7385_BASE_PHYS CONFIG_SYS_VSC7385_BR_PRELIM @@ -5895,7 +5701,6 @@ CONFIG_SYS_XHCI_USB2_ADDR CONFIG_SYS_XHCI_USB3_ADDR CONFIG_SYS_XILINX_SPI_LIST CONFIG_SYS_XIMG_LEN -CONFIG_SYS_XLB_PIPELINING CONFIG_SYS_XSVF_DEFAULT_ADDR CONFIG_SYS_XWAY_EBU_BOOTCFG CONFIG_SYS_ZYNQ_QSPI_WAIT @@ -5940,15 +5745,10 @@ CONFIG_TI_KEYSTONE_SERDES CONFIG_TI_KSNAV CONFIG_TI_SPI_MMAP CONFIG_TMU_TIMER -CONFIG_TOTAL5200 CONFIG_TPL_DRIVERS_MISC_SUPPORT CONFIG_TPL_PAD_TO CONFIG_TPM_TIS_BASE_ADDRESS CONFIG_TPS6586X_POWER -CONFIG_TQM5200 -CONFIG_TQM5200S -CONFIG_TQM5200_B -CONFIG_TQM5200_REV100 CONFIG_TRACE CONFIG_TRACE_BUFFER_SIZE CONFIG_TRACE_EARLY @@ -6063,8 +5863,6 @@ CONFIG_USB_ATMEL_CLK_SEL_UPLL CONFIG_USB_BIN_FIXUP CONFIG_USB_BOOTING CONFIG_USB_CABLE_CHECK -CONFIG_USB_CLOCK -CONFIG_USB_CONFIG CONFIG_USB_DEVICE CONFIG_USB_DEV_BASE CONFIG_USB_DEV_PULLUP_GPIO @@ -6237,7 +6035,6 @@ CONFIG_WATCHDOG_PRESC CONFIG_WATCHDOG_RC CONFIG_WATCHDOG_TIMEOUT CONFIG_WATCHDOG_TIMEOUT_MSECS -CONFIG_WDOG_GPIO_PIN CONFIG_WD_MAX_RATE CONFIG_WD_PERIOD CONFIG_X600