Move the function to soc file so that we can find all the soc/board setting in soc file and use a common board file later for all rockchip SoCs.
Signed-off-by: Kever Yang kever.yang@rock-chips.com ---
arch/arm/mach-rockchip/rk3368-board-spl.c | 8 ------ arch/arm/mach-rockchip/rk3368-board-tpl.c | 33 +---------------------- arch/arm/mach-rockchip/rk3368/rk3368.c | 31 +++++++++++++++++++++ 3 files changed, 32 insertions(+), 40 deletions(-)
diff --git a/arch/arm/mach-rockchip/rk3368-board-spl.c b/arch/arm/mach-rockchip/rk3368-board-spl.c index 9dea4ed994..b055ed4aee 100644 --- a/arch/arm/mach-rockchip/rk3368-board-spl.c +++ b/arch/arm/mach-rockchip/rk3368-board-spl.c @@ -9,17 +9,9 @@ #include <ram.h> #include <spl.h> #include <asm/io.h> -#include <asm/arch-rockchip/cru_rk3368.h> -#include <asm/arch-rockchip/grf_rk3368.h> -#include <asm/arch-rockchip/hardware.h> #include <asm/arch-rockchip/periph.h> -#include <asm/arch-rockchip/timer.h> #include <dm/pinctrl.h>
-void board_debug_uart_init(void) -{ -} - void board_init_f(ulong dummy) { struct udevice *pinctrl; diff --git a/arch/arm/mach-rockchip/rk3368-board-tpl.c b/arch/arm/mach-rockchip/rk3368-board-tpl.c index 373f009414..dc65a021c8 100644 --- a/arch/arm/mach-rockchip/rk3368-board-tpl.c +++ b/arch/arm/mach-rockchip/rk3368-board-tpl.c @@ -13,7 +13,6 @@ #include <asm/arch-rockchip/bootrom.h> #include <asm/arch-rockchip/clock.h> #include <asm/arch-rockchip/cru_rk3368.h> -#include <asm/arch-rockchip/grf_rk3368.h> #include <asm/arch-rockchip/hardware.h> #include <asm/arch-rockchip/timer.h>
@@ -79,42 +78,12 @@ static void sgrf_init(void) rk_clrreg(&cru->softrst_con[4], DMA2_SRST_REQ); }
-void board_debug_uart_init(void) -{ - /* - * N.B.: This is called before the device-model has been - * initialised. For this reason, we can not access - * the GRF address range using the syscon API. - */ - struct rk3368_grf * const grf = - (struct rk3368_grf * const)0xff770000; - - enum { - GPIO2D1_MASK = GENMASK(3, 2), - GPIO2D1_GPIO = 0, - GPIO2D1_UART0_SOUT = (1 << 2), - - GPIO2D0_MASK = GENMASK(1, 0), - GPIO2D0_GPIO = 0, - GPIO2D0_UART0_SIN = (1 << 0), - }; - -#if defined(CONFIG_DEBUG_UART_BASE) && (CONFIG_DEBUG_UART_BASE == 0xff180000) - /* Enable early UART0 on the RK3368 */ - rk_clrsetreg(&grf->gpio2d_iomux, - GPIO2D0_MASK, GPIO2D0_UART0_SIN); - rk_clrsetreg(&grf->gpio2d_iomux, - GPIO2D1_MASK, GPIO2D1_UART0_SOUT); -#endif -} - void board_init_f(ulong dummy) { struct udevice *dev; int ret;
-#define EARLY_UART -#ifdef EARLY_UART +#ifdef CONFIG_DEBUG_UART /* * Debug UART can be used from here if required: * diff --git a/arch/arm/mach-rockchip/rk3368/rk3368.c b/arch/arm/mach-rockchip/rk3368/rk3368.c index 197f0c485a..1ed06c5352 100644 --- a/arch/arm/mach-rockchip/rk3368/rk3368.c +++ b/arch/arm/mach-rockchip/rk3368/rk3368.c @@ -96,3 +96,34 @@ int arch_early_init_r(void) return mcu_init(); } #endif + +#ifdef CONFIG_DEBUG_UART_BOARD_INIT +void board_debug_uart_init(void) +{ + /* + * N.B.: This is called before the device-model has been + * initialised. For this reason, we can not access + * the GRF address range using the syscon API. + */ +#if defined(CONFIG_DEBUG_UART_BASE) && (CONFIG_DEBUG_UART_BASE == 0xff180000) + struct rk3368_grf * const grf = + (struct rk3368_grf * const)0xff770000; + + enum { + GPIO2D1_MASK = GENMASK(3, 2), + GPIO2D1_GPIO = 0, + GPIO2D1_UART0_SOUT = (1 << 2), + + GPIO2D0_MASK = GENMASK(1, 0), + GPIO2D0_GPIO = 0, + GPIO2D0_UART0_SIN = (1 << 0), + }; + + /* Enable early UART0 on the RK3368 */ + rk_clrsetreg(&grf->gpio2d_iomux, + GPIO2D0_MASK, GPIO2D0_UART0_SIN); + rk_clrsetreg(&grf->gpio2d_iomux, + GPIO2D1_MASK, GPIO2D1_UART0_SOUT); +#endif +} +#endif