From: Stefan Agner stefan.agner@toradex.com
Set fdtfile to represent the current board. This allows distribution to load the correct device tree, which in the module case often deviates from the common fallback ${soc}-${board}${boardver}.dtb...
Signed-off-by: Stefan Agner stefan.agner@toradex.com Acked-by: Max Krummenacher max.krummenacher@toradex.com Acked-by: Marcel Ziswiler marcel.ziswiler@toradex.com
---
Changes in v2: None
include/configs/colibri_vf.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h index 83a33ff786..0bbeeb902e 100644 --- a/include/configs/colibri_vf.h +++ b/include/configs/colibri_vf.h @@ -86,7 +86,8 @@ "ubi read ${fdt_addr_r} dtb && " \ "run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
-#define CONFIG_BOOTCOMMAND "run ubiboot; run distro_bootcmd;" +#define CONFIG_BOOTCOMMAND "run ubiboot; " \ + "setenv fdtfile ${soc}-colibri-${fdt_board}.dtb && run distro_bootcmd;"
#define BOOT_TARGET_DEVICES(func) \ func(MMC, mmc, 0) \ @@ -108,7 +109,6 @@ "defargs=\0" \ "dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \ "fdt_board=eval-v3\0" \ - "fdt_file=${soc}-colibri-${fdt_board}.dtb\0" \ "fdt_fixup=;\0" \ "kernel_file=zImage\0" \ "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \