On Mon, Jan 22, 2018 at 05:33:59PM +0100, Felix Brack wrote:
Hi Tom,
On 22.01.2018 16:15, Tom Rini wrote:
On Mon, Jan 22, 2018 at 12:07:49PM +0100, Felix Brack wrote:
This patch adds support for the PDU001 board.
Signed-off-by: Felix Brack fb@ltec.ch
[snip]
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index f6d57f5..15349b3 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1339,6 +1339,7 @@ source "board/vscom/baltos/Kconfig" source "board/woodburn/Kconfig" source "board/work-microwave/work_92105/Kconfig" source "board/zipitz2/Kconfig" +source "board/eets/pdu001/Kconfig"
Sorry, missed that one.
This should stay alphabetized.
[snip]
new file mode 100644 index 0000000..0967e82 --- /dev/null +++ b/arch/arm/dts/am335x-pdu001.dts
So, have you pushed this platform upstream to Linux?
Not yet. I would like to follow the same procedure for Linux as I did for U-Boot, i.e. first finish the work on all drivers required by the board.
OK. Please just make sure to keep it in sync with feedback you get from upstream there, thanks!
@@ -0,0 +1,612 @@ +/*
- pdu001.dts
- EETS GmbH PDU001 board device tree file
- Copyright (C) 2018 EETS GmbH - http://www.eets.ch/
- Copyright (C) 2011, Texas Instruments, Incorporated - http://www.ti.com/
- SPDX-License-Identifier: GPL-2.0-or-later
This is not a free-form tag. Here and elsewhere you want "GPL-2.0+".
Well, I followed the advice on https://spdx.org/licenses/ when using this tag. According to SPDX "GPL-2.0+" is deprecated as of V2.0rc2 and the use of "GPL-2.0-or-later" is suggested instead. However I'm fine using "GPL-2.0+", just let me know.
Ugh. For now, please do GPL-2.0+ and I'll take an action to do a treewide update to match what's preferred as of 3.0.