This patch supports UCC working at RMII mode on PIB board, fixup fdt blob to support rmii in kernel. It also changes the name of enable_mpc8569mds_qe_mdio to enalbe_mpc8569mds_qe_uec which is more accurate.
Signed-off-by: Haiying Wang Haiying.Wang@freescale.com --- board/freescale/mpc8569mds/bcsr.c | 15 +++++- board/freescale/mpc8569mds/bcsr.h | 2 +- board/freescale/mpc8569mds/mpc8569mds.c | 96 ++++++++++++++++++++++++++++++- include/configs/MPC8569MDS.h | 38 +++++++++++- 4 files changed, 144 insertions(+), 7 deletions(-)
diff --git a/board/freescale/mpc8569mds/bcsr.c b/board/freescale/mpc8569mds/bcsr.c index f133732..b895b4e 100644 --- a/board/freescale/mpc8569mds/bcsr.c +++ b/board/freescale/mpc8569mds/bcsr.c @@ -35,8 +35,9 @@ void disable_8569mds_flash_write() clrbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 17), BCSR17_FLASH_nWP); }
-void enable_8569mds_qe_mdio() +void enable_8569mds_qe_uec() { +#if defined(CONFIG_SYS_UCC_RGMII_MODE) setbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 7), BCSR7_UCC1_GETH_EN | BCSR7_UCC1_RGMII_EN); setbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 8), @@ -45,6 +46,18 @@ void enable_8569mds_qe_mdio() BCSR9_UCC3_GETH_EN | BCSR9_UCC3_RGMII_EN); setbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 10), BCSR10_UCC4_GETH_EN | BCSR10_UCC4_RGMII_EN); +#elif defined(CONFIG_SYS_UCC_RMII_MODE) + /* Set UCC1-4 working at RMII mode */ + clrbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 7), + BCSR7_UCC1_GETH_EN | BCSR7_UCC1_RGMII_EN); + clrbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 8), + BCSR8_UCC2_GETH_EN | BCSR8_UCC2_RGMII_EN); + clrbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 9), + BCSR9_UCC3_GETH_EN | BCSR9_UCC3_RGMII_EN); + clrbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 10), + BCSR10_UCC4_GETH_EN | BCSR10_UCC4_RGMII_EN); + setbits_8((u8 *)(CONFIG_SYS_BCSR_BASE + 9), BCSR9_UCC3_RMII_EN); +#endif }
void disable_8569mds_brd_eeprom_write_protect() diff --git a/board/freescale/mpc8569mds/bcsr.h b/board/freescale/mpc8569mds/bcsr.h index 8efe9bd..e5d63c7 100644 --- a/board/freescale/mpc8569mds/bcsr.h +++ b/board/freescale/mpc8569mds/bcsr.h @@ -76,7 +76,7 @@
void enable_8569mds_flash_write(void); void disable_8569mds_flash_write(void); -void enable_8569mds_qe_mdio(void); +void enable_8569mds_qe_uec(void); void disable_8569mds_brd_eeprom_write_protect(void);
#endif /* __BCSR_H_ */ diff --git a/board/freescale/mpc8569mds/mpc8569mds.c b/board/freescale/mpc8569mds/mpc8569mds.c index c72fbcf..4e4ec1a 100644 --- a/board/freescale/mpc8569mds/mpc8569mds.c +++ b/board/freescale/mpc8569mds/mpc8569mds.c @@ -47,6 +47,7 @@ const qe_iop_conf_t qe_iop_conf_tab[] = { /* QE_MUX_MDIO */ {2, 30, 3, 0, 2}, /* QE_MUX_MDIO */
+#if defined(CONFIG_SYS_UCC_RGMII_MODE) /* UCC_1_RGMII */ {2, 11, 2, 0, 1}, /* CLK12 */ {0, 0, 1, 0, 3}, /* ENET1_TXD0_SER1_TXD0 */ @@ -107,6 +108,44 @@ const qe_iop_conf_t qe_iop_conf_tab[] = { {2, 17, 2, 0, 2}, /* ENET4_GRXCLK */ {2, 24, 1, 0, 2}, /* ENET4_GTXCLK */
+#elif defined(CONFIG_SYS_UCC_RMII_MODE) + /* UCC_1_RMII */ + {2, 15, 2, 0, 1}, /* CLK16 */ + {0, 0, 1, 0, 3}, /* ENET1_TXD0_SER1_TXD0 */ + {0, 1, 1, 0, 3}, /* ENET1_TXD1_SER1_TXD1 */ + {0, 6, 2, 0, 3}, /* ENET1_RXD0_SER1_RXD0 */ + {0, 7, 2, 0, 1}, /* ENET1_RXD1_SER1_RXD1 */ + {0, 4, 1, 0, 2}, /* ENET1_TX_EN_SER1_RTS_B */ + {0, 12, 2, 0, 3}, /* ENET1_RX_DV_SER1_CTS_B */ + + /* UCC_2_RMII */ + {2, 15, 2, 0, 1}, /* CLK16 */ + {0, 14, 1, 0, 2}, /* ENET2_TXD0_SER2_TXD0 */ + {0, 15, 1, 0, 2}, /* ENET2_TXD1_SER2_TXD1 */ + {0, 20, 2, 0, 2}, /* ENET2_RXD0_SER2_RXD0 */ + {0, 21, 2, 0, 1}, /* ENET2_RXD1_SER2_RXD1 */ + {0, 18, 1, 0, 2}, /* ENET2_TX_EN_SER2_RTS_B */ + {0, 26, 2, 0, 3}, /* ENET2_RX_DV_SER2_CTS_B */ + + /* UCC_3_RMII */ + {2, 15, 2, 0, 1}, /* CLK16 */ + {0, 29, 1, 0, 2}, /* ENET3_TXD0_SER3_TXD0 */ + {0, 30, 1, 0, 3}, /* ENET3_TXD1_SER3_TXD1 */ + {1, 3, 2, 0, 3}, /* ENET3_RXD0_SER3_RXD0 */ + {1, 4, 2, 0, 1}, /* ENET3_RXD1_SER3_RXD1 */ + {1, 1, 1, 0, 1}, /* ENET3_TX_EN_SER3_RTS_B */ + {1, 9, 2, 0, 3}, /* ENET3_RX_DV_SER3_CTS_B */ + + /* UCC_4_RMII */ + {2, 15, 2, 0, 1}, /* CLK16 */ + {1, 12, 1, 0, 2}, /* ENET4_TXD0_SER4_TXD0 */ + {1, 13, 1, 0, 2}, /* ENET4_TXD1_SER4_TXD1 */ + {1, 18, 2, 0, 2}, /* ENET4_RXD0_SER4_RXD0 */ + {1, 19, 2, 0, 1}, /* ENET4_RXD1_SER4_RXD1 */ + {1, 16, 1, 0, 2}, /* ENET4_TX_EN_SER4_RTS_B */ + {1, 24, 2, 0, 3}, /* ENET4_RX_DV_SER4_CTS_B */ +#endif + /* UART1 is muxed with QE PortF bit [9-12].*/ {5, 12, 2, 0, 3}, /* UART1_SIN */ {5, 9, 1, 0, 3}, /* UART1_SOUT */ @@ -128,7 +167,7 @@ int board_early_init_f (void) enable_8569mds_flash_write();
#ifdef CONFIG_QE - enable_8569mds_qe_mdio(); + enable_8569mds_qe_uec(); #endif
#if CONFIG_SYS_I2C2_OFFSET @@ -356,6 +395,61 @@ extern void ft_fsl_pci_setup(void *blob, const char *pci_alias,
void ft_board_setup(void *blob, bd_t *bd) { +#if defined(CONFIG_SYS_UCC_RMII_MODE) + int nodeoff, off, err; + unsigned int val; + const u32 *ph; + const u32 *index; + + /* fixup device tree for supporting rmii mode */ + nodeoff = -1; + while ((nodeoff = fdt_node_offset_by_compatible(blob, nodeoff, + "ucc_geth")) >= 0) { + err = fdt_setprop_string(blob, nodeoff, "tx-clock-name", + "clk16"); + if (err < 0) { + printf("WARNING: could not set tx-clock-name %s.\n", + fdt_strerror(err)); + break; + } + + err = fdt_setprop_string(blob, nodeoff, "phy-connection-type", + "rmii"); + if (err < 0) { + printf("WARNING: could not set phy-connection-type " + "%s.\n", fdt_strerror(err)); + break; + } + + index = fdt_getprop(blob, nodeoff, "cell-index", 0); + if (index == NULL) { + printf("WARNING: could not get cell-index of ucc\n"); + break; + } + + ph = fdt_getprop(blob, nodeoff, "phy-handle", 0); + if (ph == NULL) { + printf("WARNING: could not get phy-handle of ucc\n"); + break; + } + + off = fdt_node_offset_by_phandle(blob, *ph); + if (off < 0) { + printf("WARNING: could not get phy node %s.\n", + fdt_strerror(err)); + break; + } + + val = 0x7 + *index; /* RMII phy address starts from 0x8 */ + + err = fdt_setprop(blob, off, "reg", &val, sizeof(u32)); + if (err < 0) { + printf("WARNING: could not set reg for phy-handle " + "%s.\n", fdt_strerror(err)); + break; + } + } +#endif ft_cpu_setup(blob, bd);
#ifdef CONFIG_PCIE1 diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h index cef44a6..cfe67b7 100644 --- a/include/configs/MPC8569MDS.h +++ b/include/configs/MPC8569MDS.h @@ -283,6 +283,8 @@ extern unsigned long get_clock_freq(void); /* * QE UEC ethernet configuration */ +#define CONFIG_SYS_UCC_RGMII_MODE /* Set UCC work at RGMII by default */ +#undef CONFIG_SYS_UCC_RMII_MODE /* Set UCC work at RMII mode */
#define CONFIG_MIIM_ADDRESS (CONFIG_SYS_CCSRBAR + 0x82120) #define CONFIG_UEC_ETH @@ -295,11 +297,18 @@ extern unsigned long get_clock_freq(void); #ifdef CONFIG_UEC_ETH1 #define CONFIG_SYS_UEC1_UCC_NUM 0 /* UCC1 */ #define CONFIG_SYS_UEC1_RX_CLK QE_CLK_NONE +#if defined(CONFIG_SYS_UCC_RGMII_MODE) #define CONFIG_SYS_UEC1_TX_CLK QE_CLK12 #define CONFIG_SYS_UEC1_ETH_TYPE GIGA_ETH #define CONFIG_SYS_UEC1_PHY_ADDR 7 #define CONFIG_SYS_UEC1_INTERFACE_MODE ENET_1000_RGMII_ID -#endif +#elif defined(CONFIG_SYS_UCC_RMII_MODE) +#define CONFIG_SYS_UEC1_TX_CLK QE_CLK16 /* CLK16 for RMII */ +#define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH +#define CONFIG_SYS_UEC1_PHY_ADDR 8 /* 0x8 for RMII */ +#define CONFIG_SYS_UEC1_INTERFACE_MODE ENET_100_RMII +#endif /* CONFIG_SYS_UCC_RGMII_MODE */ +#endif /* CONFIG_UEC_ETH1 */
#define CONFIG_UEC_ETH2 /* GETH2 */ #define CONFIG_HAS_ETH1 @@ -307,11 +316,18 @@ extern unsigned long get_clock_freq(void); #ifdef CONFIG_UEC_ETH2 #define CONFIG_SYS_UEC2_UCC_NUM 1 /* UCC2 */ #define CONFIG_SYS_UEC2_RX_CLK QE_CLK_NONE +#if defined(CONFIG_SYS_UCC_RGMII_MODE) #define CONFIG_SYS_UEC2_TX_CLK QE_CLK17 #define CONFIG_SYS_UEC2_ETH_TYPE GIGA_ETH #define CONFIG_SYS_UEC2_PHY_ADDR 1 #define CONFIG_SYS_UEC2_INTERFACE_MODE ENET_1000_RGMII_ID -#endif +#elif defined(CONFIG_SYS_UCC_RMII_MODE) +#define CONFIG_SYS_UEC2_TX_CLK QE_CLK16 /* CLK 16 for RMII */ +#define CONFIG_SYS_UEC2_ETH_TYPE FAST_ETH +#define CONFIG_SYS_UEC2_PHY_ADDR 0x9 /* 0x9 for RMII */ +#define CONFIG_SYS_UEC2_INTERFACE_MODE ENET_100_RMII +#endif /* CONFIG_SYS_UCC_RGMII_MODE */ +#endif /* CONFIG_UEC_ETH2 */
#define CONFIG_UEC_ETH3 /* GETH3 */ #define CONFIG_HAS_ETH2 @@ -319,11 +335,18 @@ extern unsigned long get_clock_freq(void); #ifdef CONFIG_UEC_ETH3 #define CONFIG_SYS_UEC3_UCC_NUM 2 /* UCC3 */ #define CONFIG_SYS_UEC3_RX_CLK QE_CLK_NONE +#if defined(CONFIG_SYS_UCC_RGMII_MODE) #define CONFIG_SYS_UEC3_TX_CLK QE_CLK12 #define CONFIG_SYS_UEC3_ETH_TYPE GIGA_ETH #define CONFIG_SYS_UEC3_PHY_ADDR 2 #define CONFIG_SYS_UEC3_INTERFACE_MODE ENET_1000_RGMII_ID -#endif +#elif defined(CONFIG_SYS_UCC_RMII_MODE) +#define CONFIG_SYS_UEC3_TX_CLK QE_CLK16 /* CLK_16 for RMII */ +#define CONFIG_SYS_UEC3_ETH_TYPE FAST_ETH +#define CONFIG_SYS_UEC3_PHY_ADDR 0xA /* 0xA for RMII */ +#define CONFIG_SYS_UEC3_INTERFACE_MODE ENET_100_RMII +#endif /* CONFIG_SYS_UCC_RGMII_MODE */ +#endif /* CONFIG_UEC_ETH3 */
#define CONFIG_UEC_ETH4 /* GETH4 */ #define CONFIG_HAS_ETH3 @@ -331,11 +354,18 @@ extern unsigned long get_clock_freq(void); #ifdef CONFIG_UEC_ETH4 #define CONFIG_SYS_UEC4_UCC_NUM 3 /* UCC4 */ #define CONFIG_SYS_UEC4_RX_CLK QE_CLK_NONE +#if defined(CONFIG_SYS_UCC_RGMII_MODE) #define CONFIG_SYS_UEC4_TX_CLK QE_CLK17 #define CONFIG_SYS_UEC4_ETH_TYPE GIGA_ETH #define CONFIG_SYS_UEC4_PHY_ADDR 3 #define CONFIG_SYS_UEC4_INTERFACE_MODE ENET_1000_RGMII_ID -#endif +#elif defined(CONFIG_SYS_UCC_RMII_MODE) +#define CONFIG_SYS_UEC4_TX_CLK QE_CLK16 /* CLK16 for RMII */ +#define CONFIG_SYS_UEC4_ETH_TYPE FAST_ETH +#define CONFIG_SYS_UEC4_PHY_ADDR 0xB /* 0xB for RMII */ +#define CONFIG_SYS_UEC4_INTERFACE_MODE ENET_100_RMII +#endif /* CONFIG_SYS_UCC_RGMII_MODE */ +#endif /* CONFIG_UEC_ETH4 */ #endif /* CONFIG_QE */
#if defined(CONFIG_PCI)