Hi Baruch,
On Wed, Nov 28, 2018 at 8:56 PM Baruch Siach baruch@tkos.co.il wrote:
Hi Aditya,
On Wed, Nov 28, 2018 at 05:00:39PM +0800, Aditya Prayoga wrote:
Similar to Clearfog rev 2.1, GPIO 19 also used to reset onboard ethernet PHY.
Signed-off-by: Aditya Prayoga aditya@kobol.io
board/kobol/helios4/helios4.c | 7 +++++++ 1 file changed, 7 insertions(+)
diff --git a/board/kobol/helios4/helios4.c b/board/kobol/helios4/helios4.c index 37c46a5..7c1a7a8 100644 --- a/board/kobol/helios4/helios4.c +++ b/board/kobol/helios4/helios4.c @@ -114,6 +114,13 @@ int board_init(void) /* Address of boot parameters */ gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
/* GPIO 19 controls the uSOM onboard phy reset */clrbits_le32(MVEBU_GPIO0_BASE + 0x0, BIT(19));clrbits_le32(MVEBU_GPIO0_BASE + 0x4, BIT(19));mdelay(1);setbits_le32(MVEBU_GPIO0_BASE + 0x0, BIT(19));mdelay(10);This copied from board/solidrun/clearfog/clearfog.c. Can't you use the generic gpio_* API for that in these days?
Yes, it was copied from clearfog. You are right, I should be able to use gpio_* API after enabling the GPIO DM. I will change it on next version. Thanks
Aditya
baruch
-- http://baruch.siach.name/blog/ ~. .~ Tk Open Systems =}------------------------------------------------ooO--U--Ooo------------{=
- baruch@tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il -