The GW5913 is a Single Board Computer based on the NXP i.MX6Q/DL SoC with the following features: - DDR3 DRAM - NAND FLASH (256MiB or 2048MiB) - Gateworks System Periperhal Controller - front panel LED's - front panel pushbutton - Digital I/O connector (I2C/GPIO/UART) - u-blox Zoe-M8Q GPS - 1x RJ45 GbE - 1x MiniPCIe socket with PCIe USB 2.0 and nanoSIM socket - Passive PoE and wide-range DC power supply
Signed-off-by: Tim Harvey tharvey@gateworks.com --- board/gateworks/gw_ventana/common.c | 54 +++++++++++++++++++++ board/gateworks/gw_ventana/eeprom.c | 2 + board/gateworks/gw_ventana/ventana_eeprom.h | 1 + 3 files changed, 57 insertions(+)
diff --git a/board/gateworks/gw_ventana/common.c b/board/gateworks/gw_ventana/common.c index 3a0b18672f..a4c2f5549f 100644 --- a/board/gateworks/gw_ventana/common.c +++ b/board/gateworks/gw_ventana/common.c @@ -843,6 +843,51 @@ struct dio_cfg gw5906_dio[] = { }, };
+struct dio_cfg gw5913_dio[] = { + { + { IOMUX_PADS(PAD_SD1_DAT0__GPIO1_IO16) }, + IMX_GPIO_NR(1, 16), + { 0, 0 }, + 0 + }, + { + { IOMUX_PADS(PAD_SD1_DAT2__GPIO1_IO19) }, + IMX_GPIO_NR(1, 19), + { IOMUX_PADS(PAD_SD1_DAT2__PWM2_OUT) }, + 2 + }, + { + { IOMUX_PADS(PAD_SD1_DAT1__GPIO1_IO17) }, + IMX_GPIO_NR(1, 17), + { IOMUX_PADS(PAD_SD1_DAT1__PWM3_OUT) }, + 3 + }, + { + { IOMUX_PADS(PAD_SD1_CMD__GPIO1_IO18) }, + IMX_GPIO_NR(1, 18), + { IOMUX_PADS(PAD_SD1_CMD__PWM4_OUT) }, + 4 + }, + { + { IOMUX_PADS(PAD_SD2_DAT0__GPIO1_IO15) }, + IMX_GPIO_NR(1, 15), + { 0, 0 }, + 0 + }, + { + { IOMUX_PADS(PAD_SD2_DAT1__GPIO1_IO14) }, + IMX_GPIO_NR(1, 14), + { 0, 0 }, + 0 + }, + { + { IOMUX_PADS(PAD_GPIO_19__GPIO4_IO05) }, + IMX_GPIO_NR(4, 5), + { 0, 0 }, + 0 + }, +}; + /* * Board Specific GPIO */ @@ -1082,6 +1127,15 @@ struct ventana gpio_cfg[GW_UNKNOWN] = { .vsel_pin = IMX_GPIO_NR(6, 14), .mmc_cd = IMX_GPIO_NR(7, 0), }, + + /* GW5913 */ + { + .gpio_pads = gw5912_gpio_pads, + .num_pads = ARRAY_SIZE(gw5912_gpio_pads) / 2, + .dio_cfg = gw5913_dio, + .dio_num = ARRAY_SIZE(gw5913_dio), + .wdis = IMX_GPIO_NR(1, 0), + }, };
#define SETUP_GPIO_OUTPUT(gpio, name, level) \ diff --git a/board/gateworks/gw_ventana/eeprom.c b/board/gateworks/gw_ventana/eeprom.c index a4f3065c7d..d21aa3c38f 100644 --- a/board/gateworks/gw_ventana/eeprom.c +++ b/board/gateworks/gw_ventana/eeprom.c @@ -128,6 +128,8 @@ read_eeprom(int bus, struct ventana_board_info *info) type = GW5910; else if (info->model[4] == '1' && info->model[5] == '2') type = GW5912; + else if (info->model[4] == '1' && info->model[5] == '3') + type = GW5913; break; default: printf("EEPROM: Unknown model in EEPROM: %s\n", info->model); diff --git a/board/gateworks/gw_ventana/ventana_eeprom.h b/board/gateworks/gw_ventana/ventana_eeprom.h index 9cac4a769c..2d5c27261e 100644 --- a/board/gateworks/gw_ventana/ventana_eeprom.h +++ b/board/gateworks/gw_ventana/ventana_eeprom.h @@ -123,6 +123,7 @@ enum { GW5909, GW5910, GW5912, + GW5913, GW_UNKNOWN, GW_BADCRC, };