Hello all,
My U-Boot version is 1.2.0 (Dec 31 2008) release.
fw_printenv is working fine. . ~ # fw_printenv bootdelay=3 baudrate=115200 bootfile="uImage" mtdparts=davinci-nand.0:512k(ubl),128k(uboot-env),512k(uboot),2m(kernel),-(app) stdin=serial stdout=serial stderr=serial ipaddr=192.168.2.110 gatewayip=192.168.2.1 netmask=255.255.255.0 hostname=dm6467_streamer1 ethaddr=00:03:23:01:00:01 bootcmd=tftpboot 0x82000000 uImage;bootm 0x82000000 serverip=192.168.2.67 bootargs=console=ttyS0,115200n8 root=/dev/nfs rw nfsroot=192.168.2.67: /home/dm64 67/bsp/rootfs/fs,udp,v3,rsize=4096,wsize=1400 ip=192.168.2.110:192.168 .2.255:192.168.2.1:255.255.255.0:dm6467_streamer1::off mem=60M mtdparts=davinci- nand.0:512k(ubl),128k(uboot-env),512k(uboot),2m(kernel),-(app) eth=$(ethaddr)
But when trying to set the uboot env with fw_setenv we have to following errors ~ # fw_setenv gatewayip 192.168.2.1 Unlocking flash... Done Erasing old environment... Done Writing environment to /dev/mtd1... CRC write error on /dev/mtd1: Invalid argument Error: can't write fw_env to flash ~ #
can anyone help me to clear this problem?
Regards, B.V.Srikanth Reddy