From: Fabio Estevam fabio.estevam@freescale.com
Since ROM may modify the LDO ramp up time according to fuse setting, it is safer to reset the ramp up field to its default value of 00:
00: 64 cycles of 24MHz clock; 01: 128 cycles of 24MHz clock; 02: 256 cycles of 24MHz clock; 03: 512 cycles of 24MHz clock;
Signed-off-by: Anson Huang b20788@freescale.com Signed-off-by: Jason Liu r64343@freescale.com Signed-off-by: Fabio Estevam fabio.estevam@freescale.com --- Changes since v1: - None
arch/arm/cpu/armv7/mx6/soc.c | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
diff --git a/arch/arm/cpu/armv7/mx6/soc.c b/arch/arm/cpu/armv7/mx6/soc.c index 6cbade7..13b9e36 100644 --- a/arch/arm/cpu/armv7/mx6/soc.c +++ b/arch/arm/cpu/armv7/mx6/soc.c @@ -93,6 +93,20 @@ void init_aips(void) writel(0x00000000, &aips2->opacr4); }
+static void clear_ldo_ramp(void) +{ + struct anatop_regs *anatop = (struct anatop_regs *)ANATOP_BASE_ADDR; + int reg; + + /* ROM may modify LDO ramp up time according to fuse setting, so in + * order to be in the safe side we neeed to reset these settings to + * match the reset value: 0'b00 + */ + reg = readl(&anatop->ana_misc2); + reg &= ~(0x3f << 24); + writel(reg, &anatop->ana_misc2); +} + /* * Set the VDDSOC * @@ -113,6 +127,8 @@ static void set_vddsoc(u32 mv) else val = (mv - 700) / 25;
+ clear_ldo_ramp(); + /* * Mask out the REG_CORE[22:18] bits (REG2_TRIG) * and set them to the calculated value (0.7V + val * 0.25V)