From: Bhuvanchandra DV bhuvanchandra.dv@toradex.com
Switch to the generic compressed Kernel image type (zImage) instead of the U-Boot specific uImage format.
While at it also fix device tree naming for MMC DFU.
Signed-off-by: Bhuvanchandra DV bhuvanchandra.dv@toradex.com Acked-by: Marcel Ziswiler marcel.ziswiler@toradex.com
---
include/configs/colibri_imx6.h | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-)
diff --git a/include/configs/colibri_imx6.h b/include/configs/colibri_imx6.h index 6e056aab31..a6a823ee1f 100644 --- a/include/configs/colibri_imx6.h +++ b/include/configs/colibri_imx6.h @@ -108,17 +108,17 @@ #include <config_distro_bootcmd.h> #undef BOOTENV_RUN_NET_USB_START #define BOOTENV_RUN_NET_USB_START "" -#else +#else /* CONFIG_SPL_BUILD */ #define BOOTENV -#endif +#endif /* CONFIG_SPL_BUILD */
#define DFU_ALT_EMMC_INFO \ "u-boot.imx raw 0x2 0x3ff mmcpart 0;" \ "boot part 0 1;" \ "rootfs part 0 2;" \ - "uImage fat 0 1;" \ - "imx6q-colibri-eval-v3.dtb fat 0 1;" \ - "imx6q-colibri-cam-eval-v3.dtb fat 0 1" + "zImage fat 0 1;" \ + "imx6dl-colibri-eval-v3.dtb fat 0 1;" \ + "imx6dl-colibri-cam-eval-v3.dtb fat 0 1"
#define EMMC_BOOTCMD \ "emmcargs=ip=off root=/dev/mmcblk0p2 rw,noatime rootfstype=ext4 " \ @@ -128,7 +128,7 @@ "${vidargs}; echo Booting from internal eMMC chip...; " \ "run emmcdtbload; load mmc 0:1 ${kernel_addr_r} " \ "${boot_file} && run fdt_fixup && " \ - "bootm ${kernel_addr_r} ${dtbparam}\0" \ + "bootz ${kernel_addr_r} ${dtbparam}\0" \ "emmcdtbload=setenv dtbparam; load mmc 0:1 ${fdt_addr_r} " \ "${fdt_file} && setenv dtbparam " - ${fdt_addr_r}" && true\0"
@@ -148,11 +148,11 @@ "setenv bootargs ${defargs} ${nfsargs} ${setupargs} " \ "${vidargs}; echo Booting via DHCP/TFTP/NFS...; " \ "run nfsdtbload; dhcp ${kernel_addr_r} " \ - "&& run fdt_fixup && bootm ${kernel_addr_r} ${dtbparam}\0" \ + "&& run fdt_fixup && bootz ${kernel_addr_r} ${dtbparam}\0" \ "nfsdtbload=setenv dtbparam; tftp ${fdt_addr_r} ${fdt_file} " \ "&& setenv dtbparam " - ${fdt_addr_r}" && true\0"
-#define SD_BOOTCMD \ +#define SD_BOOTCMD \ "sdargs=ip=off root=/dev/mmcblk1p2 rw,noatime rootfstype=ext4 " \ "rootwait\0" \ "sdboot=run setup; " \ @@ -160,7 +160,7 @@ "${vidargs}; echo Booting from SD card; " \ "run sddtbload; load mmc 1:1 ${kernel_addr_r} " \ "${boot_file} && run fdt_fixup && " \ - "bootm ${kernel_addr_r} ${dtbparam}\0" \ + "bootz ${kernel_addr_r} ${dtbparam}\0" \ "sddtbload=setenv dtbparam; load mmc 1:1 ${fdt_addr_r} " \ "${fdt_file} && setenv dtbparam " - ${fdt_addr_r}" && true\0"
@@ -171,7 +171,7 @@ "${usbargs} ${vidargs}; echo Booting from USB stick...; " \ "usb start && run usbdtbload; load usb 0:1 ${kernel_addr_r} " \ "${boot_file} && run fdt_fixup && " \ - "bootm ${kernel_addr_r} ${dtbparam}\0" \ + "bootz ${kernel_addr_r} ${dtbparam}\0" \ "usbdtbload=setenv dtbparam; load usb 0:1 ${fdt_addr_r} " \ "${fdt_file} && setenv dtbparam " - ${fdt_addr_r}" && true\0"
@@ -182,7 +182,7 @@ "run distro_bootcmd ; " \ "usb start ; " \ "setenv stdout serial,vga ; setenv stdin serial,usbkbd\0" \ - "boot_file=uImage\0" \ + "boot_file=zImage\0" \ "console=ttymxc0\0" \ "defargs=enable_wait_mode=off galcore.contiguousSize=50331648\0" \ "dfu_alt_info=" DFU_ALT_EMMC_INFO "\0" \