On 08/26/2016 04:27 PM, Sriram Dash wrote:
From: Marek Vasut [mailto:marex@denx.de] On 08/24/2016 12:39 PM, Sriram Dash wrote:
Currently the controller by default enables the Receive Detect feature in P3 mode in USB 3.0 PHY. However, USB 3.0 PHY does not reliably support receive detection in P3 mode. Enabling the USB3 controller to configure USB in P2 mode whenever the Receive Detect feature is required.
Signed-off-by: Sriram Dash sriram.dash@nxp.com Signed-off-by: Rajesh Bhagat rajesh.bhagat@nxp.com
Changes in v2:
- Do Soc ver checking for applying erratum
I tried applying this on u-boot-usb/next , but it fails to apply, please fix and repost.
It might be conflicting with the patch for changing burst beat "drivers: usb: xhci-fsl: Change burst beat and outstanding pipelined transfers requests". https://patchwork.ozlabs.org/patch/661426/
Great, I already applied that one.
I will repost with the burst beat setting applied earlier.
No, please fix this patch.
-- Best regards, Marek Vasut