Hi all,
I have an issue where I have a nexus driver and a sub serial driver on top of it. The base nexus driver is getting bound and probed properly, however the serial drivers (pci-console) below it are not.
My device tree looks something like this:
pci-console-nexus@0x03000000 { /* Remote PCI console buffer location */ compatible = "marvell,pci-console-nexus"; status = "okay"; #address-cells = <2>; #size-cells = <1>; skip-init; num-consoles = <8>; reg = <0 0x03000000 0 0x40000>; ranges = <0 0 0 0x3000100 0x4000>, <1 0 0 0x3004100 0x4000>, <2 0 0 0x3008100 0x4000>, <3 0 0 0x300c100 0x4000>, <4 0 0 0x3010100 0x4000>, <5 0 0 0x3014100 0x4000>, <6 0 0 0x3018100 0x4000>, <7 0 0 0x301c100 0x4000>; console@0 { compatible = "marvell,pci-console"; status = "okay"; reg = <0 0 0x4000>; tx-buffer-size = <0x2f80>; rx-buffer-size = <0x1000>; }; ... console@7 { compatible = "marvell,pci-console"; status = "okay"; reg = <7 0 0x4000>; tx-buffer-size = <0x2f80>; rx-buffer-size = <0x1000>; }; };
When U-Boot binds the drivers it sees and binds pci-console-nexus but it never even attempts to go any deeper in the device tree. Both drivers are used. The nexus datastructure is a shared resouce that can be used by ATF.
I added a bind function in the nexus driver that basically does: dev_for_each_subnode(node, parent) { ret = device_bind_driver_to_node(parent, DRIVER_NAME, ofnode_get_name(node), node, &dev); get_uclass(UCLASS_SERIAL, &uc); dev->uclass = uic; }
With this I see the consoles in the dm tree and uclass list, but the sequences don't seem to be getting set.
What I notice when I type dm uclass is: uclass 60: serial - * serial@87e028000000 @ 7fbeb3360, seq 0, (req 0) - serial@87e029000000 @ 7fbeb3430, seq -1, (req 1) - console@0 @ 7fbeb3660 - console@1 @ 7fbeb3780 - console@2 @ 7fbeb38a0 - console@3 @ 7fbeb39c0 - console@4 @ 7fbeb3ae0 - console@5 @ 7fbeb3c00 - console@6 @ 7fbeb3d20 - console@7 @ 7fbeb3e40 - * pci-bootcmd@0x03fff000 @ 7fbeb3f60, seq 1, (req -1)
Does anyone have any ideas on how I should properly handle this? It seems that whatever I'm doing is overly complicated and I'm missing something for the DM layer to not go deeper into the tree past the nexus layer.
static const struct udevice_id octeontx_pcie_console_nexus_serial_id[] = { { .compatible = "marvell,pci-console-nexus", }, { }, };
U_BOOT_DRIVER(octeontx_pcie_console_nexus) = { .name = DRIVER_NAME "-nexus", .id = UCLASS_MISC, .flags = DM_FLAG_PRE_RELOC, .of_match = of_match_ptr(octeontx_pcie_console_nexus_serial_id), .ofdata_to_platdata = octeontx_pcie_console_nexus_ofdata_to_platdata, .platdata_auto_alloc_size = sizeof(struct octeontx_pcie_console_plat_data), .bind = octeontx_pcie_console_nexus_bind, .probe = octeontx_pcie_console_nexus_probe, .priv_auto_alloc_size = sizeof(struct octeontx_pcie_console_nexus_priv), };
static const struct dm_serial_ops octeontx_pcie_console_ops = { .setbrg = octeontx_pcie_console_setbrg, .getc = octeontx_pcie_console_getc, .putc = octeontx_pcie_console_putc, .pending = octeontx_pcie_console_pending, .clear = octeontx_pcie_console_clear, };
static const struct udevice_id octeontx_pcie_console_serial_id[] = { { .compatible = "marvell,pci-console", }, { }, };
U_BOOT_DRIVER(octeontx_pcie_console) = { .name = DRIVER_NAME, .id = UCLASS_SERIAL, .ops = &octeontx_pcie_console_ops, .of_match = of_match_ptr(octeontx_pcie_console_serial_id), .probe = octeontx_pcie_console_probe, .ofdata_to_platdata = octeontx_pcie_console_ofdata_to_platdata, .remove = octeontx_pcie_console_remove, .priv_auto_alloc_size = sizeof(struct octeontx_pcie_console_priv), .platdata_auto_alloc_size = sizeof(struct octeontx_pcie_console_plat_data), .flags = DM_FLAG_OS_PREPARE | DM_FLAG_PRE_RELOC, };
-Aaron