Hi
I am trying to update a board (Freescale 8280 cpu) from u-boot 1.1.4 to 1.3.0-rc3 Right now it is hanging in env_relocate (env_common.c:124). It is calling malloc for a size of 64k (65536) and malloc is hanging in a for loop in dlmalloc.c:2191
Does anybody have any pointer to what could be happening?
screen output with debug and DEBUGF enabled
U-Boot 1.3.0-rc3 (Oct 19 2007 - 16:21:08)
MPC8260 Reset Status: External Soft, External Hard
MPC8260 Clock Configuration - Bus-to-Core Mult 4.5x, VCO Div 2, 60x Bus Freq 22-65 , Core Freq 100-300 - dfbrg 0, corecnf 0x17, busdf 5, cpmdf 1, plldf 0, pllmf 5, pcidf 11 - vco_out 597196800, scc_clk 149299200, brg_clk 149299200 - cpu_clk 447897600, cpm_clk 298598400, bus_clk 99532800
CPU: MPC8260 (HiP7 Rev 14, Mask 1.0 1K49M) at 447.897 MHz Board: Innovative Systems AP2, CPU1 UPMs: Configured FPGA: (cfgaddr 0xff810000)............ Status = OK Altera ID: 0x110e I2C: ready DRAM: DIMM socket probe: Slot1 = 1, Slot2 =1 SDRAM configuration read from SPD Size per side = 256MB Organization: 4 sides, 4 banks, 10 Columns, 13 Rows, Width = 64 bits Refresh rate = 13, CAS latency = 2, Using Page Based interleave Total size: 1024 MB Top of RAM usable for U-Boot at: 10000000 Reserving 212k for U-Boot at: 0ffca000 Reserving 192k for malloc() at: 0ff9a000 Reserving 84 Bytes for Board Info at: 0ff99fac Reserving 72 Bytes for Global Data at: 0ff99f64 Stack Pointer at: 0ff99f48 New Stack Pointer is: 0ff99f48 Now running in RAM - U-Boot at: 0ffca000 FLASH: flash_protect ON: from 0xFFF00000 to 0xFFF3FFFF flash_protect ON: from 0xFFF40000 to 0xFFF4FFFF 8 MB env_relocate[197] offset = 0x0