
Hi Ivan,
On 2023-12-18 22:03, Ivan T. Ivanov wrote:
Hi,
These patches are adding basic support for RPi5. They are based on v2 series from Dmitry Malkin[1].
With them I am able to _start_ current openSUSE Tumbleweed without modification. They are still a lot of things to be added to the upstream Linux before it runs flawlessly on this device, but at least in U-Booot SD controller used for uSD card and Frameboffer and HDMI0 devices are working fine now. It seems that PCIe controller is working fine too, but I have not tested it too much.
Thank you very much for this work!
Serial console and reset are also functional.
I've applied the patchset to v2024.01-rc5 and built the rpi_arm64_defconfig target. I added enable_uart=1 and kernel=u-boot.bin to config.txt. While I see a brief U-Boot logo on HDMI, I haven't gotten anything on the serial console on pin 8/10 of the Raspberry Pi pin header. Is there anything specific needed to get the console going?
-- Stefan
Hopefully this will help others add missing pieces more easily.
Happy hacking!
Regards, Ivan
[1] https://lore.kernel.org/all/CAKRNjQ0dsWozGo4n8g58m4cCEk3n=qx1R+L24WBgpo-iP1y...
Dmitry Malkin (2): rpi5: add initial memory map for bcm2712 rpi5: Use devicetree as alternative way to read IO base addresses
Ivan T. Ivanov (5): rpi5: Use devicetree to retrieve board revision bcm2835: brcm,bcm2708-fb device is using r5g6b5 format mmc: bcmstb: Add support for bcm2712 SD controller configs: rpi_arm64: enable SDHCI BCMSTB driver pci: pcie-brcmstb: Add bcm2712 PCIe controller support
arch/arm/mach-bcm283x/include/mach/base.h | 5 +- arch/arm/mach-bcm283x/include/mach/mbox.h | 3 +- arch/arm/mach-bcm283x/include/mach/sdhci.h | 3 +- arch/arm/mach-bcm283x/include/mach/timer.h | 3 +- arch/arm/mach-bcm283x/include/mach/wdog.h | 3 +- arch/arm/mach-bcm283x/init.c | 81 ++++++++-- board/raspberrypi/rpi/rpi.c | 22 ++- configs/rpi_arm64_defconfig | 1 + drivers/mmc/bcmstb_sdhci.c | 173 ++++++++++++++++++++- drivers/pci/pcie_brcmstb.c | 23 ++- drivers/video/bcm2835.c | 10 +- 11 files changed, 296 insertions(+), 31 deletions(-)