Hello list!
I've checked the archives, but have not found anyone using the 860 with my problem.
I have a MPC860 board ported from FADS860 board. ( TEXT_BASE is also 0x2800000, but IMMR is 0x2200000). I have vxworks run OK on it. But when I am porting U-Boot on it. I met booting problem on it.
For Example as following: (ELDK1.0 + U-boot-0.3.0) ---------------------------------------------------------------------------------------- located in /cpu/mpc8xx/start.S .globl _start .extern testLed _start: lis r3, 0x220 /* my IMMR addr is 0x2200000 */ ori r3, r3, 0x0000 mtspr 638, r3 /*IMMR SPR is 638*/
bl testLed /* this is to light LEDs on board(PA0 - PA3)*/ ---------------------------------------------------------------------------------------- located in /cpu/mpc8xx/cpu_init.c void testLed(void) { int i,k; for(k=0;k<5;k++) { * ( (volatile unsigned short *) (0x2200000 + 0x950) ) = 0xA000; /* light LED */ for (i=0; i<0xFFFF;i++) {;}; * ( (volatile unsigned short *) (0x2200000 + 0x950) ) = 0x0000; /* unlight LED */ for (i=0; i<0xFFFF;i++) {;}; }; };
When I build to *.bin and burn into bootrom flash, after power on, the LEDs of board are not lighting. But, I tested these codes under Vxworks Bootrom code (rominit.S), that's OK.
maybe it is linking problem? I 'm confused. Could you like to help me or give me any comments ?
Thanks in advance! John