Hello!
I am learning about Fastboot, and I would like to run it from u-boot and detect it from my host computer (I have the tools on my host, that's working with other devices).
I am using a pocketbeagle and I built an image using Yocto. I can get into the u-boot prompt at boot time, and I get the following output:
``` Rebooting... reboot: Restarting system
U-Boot SPL 2020.07 (Jul 06 2020 - 19:22:53 +0000) Trying to boot from MMC1
U-Boot 2020.07 (Jul 06 2020 - 19:22:53 +0000)
CPU : AM335X-GP rev 2.1 Model: TI AM335x PocketBeagle DRAM: 512 MiB WDT: Started with servicing (60s timeout) NAND: 0 MiB MMC: OMAP SD/MMC: 0 Loading Environment from FAT... *** Warning - bad CRC, using default environment
<ethaddr> not set. Validating first E-fuse MAC Net: No ethernet found. Hit any key to stop autoboot: 2 ```
If I hit a key here, I get the u-boot prompt (`=>`) where I find "fastboot". The thing is that none of the fastboot commands I run have any output:
* fastboot usb 0 * fastboot usb * fastboot udp
Now, fastboot udp is not enabled in my defconfig, but the udp gadget support is, and the usb fastboot gadget is enabled, too. From my host, I just don't see anything in the `dmesg` output.
Here are a few questions:
* Does fastboot usb go over ethernet? If yes, I guess that the "Net: No ethernet found." message is an issue that I need to fix such that a new usb network interface is created by my host, but from my tests with this proprietary device I own, it does not seem to be enumerated as a network interface. * In readthedocs [1], it mentions that "The CONFIG_USB_GADGET_VENDOR_NUM must be one of the numbers supported by the fastboot client." In my setup, it is set to 0x0451, and I did not find what is supposed to be supported in fastboot.cpp [2]. So from the host, I also tried `fastboot -i 0x0451 devices`. Is that an issue? * I thought that maybe I should start USB, because the output of `usb tree` says "USB is stopped. Please issue 'usb start' first.". But running `usb start` errors with "Bus usb@47401800: Port not available.". Is that related to fastboot at all, i.e. should I be concerned about that? And how can I debug it?
Thanks in advance for the help! Jonas
[1]: https://u-boot.readthedocs.io/en/latest/android/fastboot.html [2]: https://android.googlesource.com/platform/system/core/+/master/fastboot/fast...