Add i2c support to dkb board with pantheon soc.
Signed-off-by: Lei Wen leiwen@marvell.com --- Changelog: V2: NO CHANGE
V3: clean code sytle issue Add i2c clock enable code include in I2C configure define block
V4: make i2c definition included in the ifdef
V5: NO CHANGE
V6: Move the CONFIG_CMD_I2C define place
V7: Make global change from PXA to MV move i2c setting to <arch/config>
arch/arm/cpu/arm926ejs/pantheon/cpu.c | 12 ++++++++++++ arch/arm/include/asm/arch-pantheon/config.h | 10 ++++++++++ arch/arm/include/asm/arch-pantheon/cpu.h | 4 +++- arch/arm/include/asm/arch-pantheon/mfp.h | 6 ++++-- board/Marvell/dkb/dkb.c | 4 ++++ include/configs/dkb.h | 2 ++ 6 files changed, 35 insertions(+), 3 deletions(-)
diff --git a/arch/arm/cpu/arm926ejs/pantheon/cpu.c b/arch/arm/cpu/arm926ejs/pantheon/cpu.c index 9ddc77c..8b2eafa 100644 --- a/arch/arm/cpu/arm926ejs/pantheon/cpu.c +++ b/arch/arm/cpu/arm926ejs/pantheon/cpu.c @@ -59,6 +59,12 @@ int arch_cpu_init(void) /* Enable GPIO clock */ writel(APBC_APBCLK, &apbclkres->gpio);
+#ifdef CONFIG_I2C_MV + /* Enable I2C clock */ + writel(APBC_RST | APBC_FNCLK | APBC_APBCLK, &apbclkres->twsi); + writel(APBC_FNCLK | APBC_APBCLK, &apbclkres->twsi); +#endif + icache_enable();
return 0; @@ -76,3 +82,9 @@ int print_cpuinfo(void) return 0; } #endif + +#ifdef CONFIG_I2C_MV +void i2c_clk_enable(void) +{ +} +#endif diff --git a/arch/arm/include/asm/arch-pantheon/config.h b/arch/arm/include/asm/arch-pantheon/config.h index 710b386..5658592 100644 --- a/arch/arm/include/asm/arch-pantheon/config.h +++ b/arch/arm/include/asm/arch-pantheon/config.h @@ -34,5 +34,15 @@ #define MV_UART_CONSOLE_BASE PANTHEON_UART1_BASE #define CONFIG_SYS_NS16550_IER (1 << 6) /* Bit 6 in UART_IER register represents UART Unit Enable */ +/* + * I2C definition + */ +#ifdef CONFIG_CMD_I2C +#define CONFIG_I2C_MV 1 +#define CONFIG_MV_I2C_REG 0xd4011000 +#define CONFIG_HARD_I2C 1 +#define CONFIG_SYS_I2C_SPEED 0 +#define CONFIG_SYS_I2C_SLAVE 0xfe +#endif
#endif /* _PANTHEON_CONFIG_H */ diff --git a/arch/arm/include/asm/arch-pantheon/cpu.h b/arch/arm/include/asm/arch-pantheon/cpu.h index 30f4393..60955c5 100644 --- a/arch/arm/include/asm/arch-pantheon/cpu.h +++ b/arch/arm/include/asm/arch-pantheon/cpu.h @@ -50,7 +50,9 @@ struct panthapb_registers { u32 uart0; /*0x000*/ u32 uart1; /*0x004*/ u32 gpio; /*0x008*/ - u8 pad0[0x034 - 0x08 - 4]; + u8 pad0[0x02c - 0x08 - 4]; + u32 twsi; /*0x02c*/ + u8 pad1[0x034 - 0x2c - 4]; u32 timers; /*0x034*/ };
diff --git a/arch/arm/include/asm/arch-pantheon/mfp.h b/arch/arm/include/asm/arch-pantheon/mfp.h index fb291cf..e939196 100644 --- a/arch/arm/include/asm/arch-pantheon/mfp.h +++ b/arch/arm/include/asm/arch-pantheon/mfp.h @@ -32,8 +32,10 @@ * offset, pull,pF, drv,dF, edge,eF ,afn,aF */ /* UART2 */ -#define MFP47_UART2_RXD MFP_REG(0x198) | MFP_AF6 | MFP_DRIVE_MEDIUM -#define MFP48_UART2_TXD MFP_REG(0x19c) | MFP_AF6 | MFP_DRIVE_MEDIUM +#define MFP47_UART2_RXD (MFP_REG(0x198) | MFP_AF6 | MFP_DRIVE_MEDIUM) +#define MFP48_UART2_TXD (MFP_REG(0x19c) | MFP_AF6 | MFP_DRIVE_MEDIUM) +#define MFP53_CI2C_SCL (MFP_REG(0x1b0) | MFP_AF2 | MFP_DRIVE_MEDIUM) +#define MFP54_CI2C_SDA (MFP_REG(0x1b4) | MFP_AF2 | MFP_DRIVE_MEDIUM)
/* More macros can be defined here... */
diff --git a/board/Marvell/dkb/dkb.c b/board/Marvell/dkb/dkb.c index 72a2d2a..00f73e7 100644 --- a/board/Marvell/dkb/dkb.c +++ b/board/Marvell/dkb/dkb.c @@ -36,6 +36,10 @@ int board_early_init_f(void) MFP47_UART2_RXD, MFP48_UART2_TXD,
+ /* I2C */ + MFP53_CI2C_SCL, + MFP54_CI2C_SDA, + MFP_EOC /*End of configureation*/ }; /* configure MFP's */ diff --git a/include/configs/dkb.h b/include/configs/dkb.h index 638af5e..b400d0a 100644 --- a/include/configs/dkb.h +++ b/include/configs/dkb.h @@ -47,6 +47,7 @@ #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ #include <config_cmd_default.h> #define CONFIG_CMD_AUTOSCRIPT +#define CONFIG_CMD_I2C #undef CONFIG_CMD_NET #undef CONFIG_CMD_NFS /* @@ -56,6 +57,7 @@ #include "mv-common.h"
#undef CONFIG_ARCH_MISC_INIT + /* * Environment variables configurations */