Hi Jorge,
On Thu, Jan 16, 2020 at 5:30 PM Jorge Ramirez-Ortiz, Foundries jorge@foundries.io wrote:
Hi Fabio,
I am trying to enable LDO in an imx7ulp based board but somehow the board locks up as soon I write to PMC1_RUN (using the init_ldo_mode sequence).
I think it is interesting that bit PMC0_CTRL_PMC1ON is already set so I am wondering if you think it is possible - in your experience- that ROM might have already configured LDO? or was this also the case - this bit already set- when you tested the feature?
I also noticed that if I dont execute the init_ldo_mode sequence and just check for the LODEN bit [see snipet below], this is already set which too seems strange.
On a i.MX7ULP Embedded Artists board I noticed that LDOEN bit comes set after POR too.
Should we do something like this to avoid re-initializing the PMC1?
--- a/arch/arm/mach-imx/mx7ulp/soc.c +++ b/arch/arm/mach-imx/mx7ulp/soc.c @@ -122,6 +122,9 @@ static void init_ldo_mode(void) { unsigned int reg;
+ if (ldo_mode_is_enabled()) + return; + /* Set LDOOKDIS */ setbits_le32(PMC0_BASE_ADDR + PMC0_CTRL, PMC0_CTRL_LDOOKDIS);