From: Eric Nelson eric.nelson@boundarydevices.com
Ensure that transmit and receive buffers are cache-line aligned. Invalidate cache for each packet as received, update receive buffer descriptors one cache line at a time, flush cache before transmitting.
Original patch by Marek: http://lists.denx.de/pipermail/u-boot/2012-February/117695.html
Signed-off-by: Eric Nelson <eric.nelson at boundarydevices.com> Acked-by: Marek Vasut marex@denx.de Tested-by: Marek Vasut marex@denx.de --- drivers/net/fec_mxc.c | 277 ++++++++++++++++++++++++++++++++++--------------- drivers/net/fec_mxc.h | 19 +--- 2 files changed, 192 insertions(+), 104 deletions(-)
diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c index 1fdd071..d8db9f0 100644 --- a/drivers/net/fec_mxc.c +++ b/drivers/net/fec_mxc.c @@ -38,16 +38,28 @@ DECLARE_GLOBAL_DATA_PTR; #error "CONFIG_MII has to be defined!" #endif
-#ifndef CONFIG_FEC_XCV_TYPE -#define CONFIG_FEC_XCV_TYPE MII100 +#ifndef CONFIG_FEC_XCV_TYPE +#define CONFIG_FEC_XCV_TYPE MII100 #endif
/* * The i.MX28 operates with packets in big endian. We need to swap them before * sending and after receiving. */ -#ifdef CONFIG_MX28 -#define CONFIG_FEC_MXC_SWAP_PACKET +#ifdef CONFIG_MX28 +#define CONFIG_FEC_MXC_SWAP_PACKET +#endif + +#define RXDESC_PER_CACHELINE (ARCH_DMA_MINALIGN/sizeof(struct fec_bd)) + +/* Check various alignment issues at compile time */ +#if ((ARCH_DMA_MINALIGN < 16) || (ARCH_DMA_MINALIGN % 16 != 0)) +#error "ARCH_DMA_MINALIGN must be multiple of 16!" +#endif + +#if ((PKTALIGN < ARCH_DMA_MINALIGN) || \ + (PKTALIGN % ARCH_DMA_MINALIGN != 0)) +#error "PKTALIGN must be multiple of ARCH_DMA_MINALIGN!" #endif
#undef DEBUG @@ -59,7 +71,7 @@ struct nbuf { uint8_t head[16]; /**< MAC header(6 + 6 + 2) + 2(aligned) */ };
-#ifdef CONFIG_FEC_MXC_SWAP_PACKET +#ifdef CONFIG_FEC_MXC_SWAP_PACKET static void swap_packet(uint32_t *packet, int length) { int i; @@ -259,43 +271,52 @@ static int fec_tx_task_disable(struct fec_priv *fec) * Initialize receive task's buffer descriptors * @param[in] fec all we know about the device yet * @param[in] count receive buffer count to be allocated - * @param[in] size size of each receive buffer + * @param[in] dsize desired size of each receive buffer * @return 0 on success * * For this task we need additional memory for the data buffers. And each * data buffer requires some alignment. Thy must be aligned to a specific - * boundary each (DB_DATA_ALIGNMENT). + * boundary each. */ -static int fec_rbd_init(struct fec_priv *fec, int count, int size) +static int fec_rbd_init(struct fec_priv *fec, int count, int dsize) { - int ix; - uint32_t p = 0; - - /* reserve data memory and consider alignment */ - if (fec->rdb_ptr == NULL) - fec->rdb_ptr = malloc(size * count + DB_DATA_ALIGNMENT); - p = (uint32_t)fec->rdb_ptr; - if (!p) { - puts("fec_mxc: not enough malloc memory\n"); - return -ENOMEM; - } - memset((void *)p, 0, size * count + DB_DATA_ALIGNMENT); - p += DB_DATA_ALIGNMENT-1; - p &= ~(DB_DATA_ALIGNMENT-1); - - for (ix = 0; ix < count; ix++) { - writel(p, &fec->rbd_base[ix].data_pointer); - p += size; - writew(FEC_RBD_EMPTY, &fec->rbd_base[ix].status); - writew(0, &fec->rbd_base[ix].data_length); - } + uint32_t size; + int i; + /* - * mark the last RBD to close the ring + * Allocate memory for the buffers. This allocation respects the + * alignment */ - writew(FEC_RBD_WRAP | FEC_RBD_EMPTY, &fec->rbd_base[ix - 1].status); + size = roundup(dsize, ARCH_DMA_MINALIGN); + for (i = 0; i < count; i++) { + uint32_t data_ptr = readl(&fec->rbd_base[i].data_pointer); + if (data_ptr == 0) { + uint8_t *data = memalign(ARCH_DMA_MINALIGN, + size); + if (!data) { + printf("%s: error allocating rxbuf %d\n", + __func__, i); + goto err; + } + writel((uint32_t)data, &fec->rbd_base[i].data_pointer); + } /* needs allocation */ + writew(FEC_RBD_EMPTY, &fec->rbd_base[i].status); + writew(0, &fec->rbd_base[i].data_length); + } + + /* Mark the last RBD to close the ring. */ + writew(FEC_RBD_WRAP | FEC_RBD_EMPTY, &fec->rbd_base[i - 1].status); fec->rbd_index = 0;
return 0; + +err: + for (; i >= 0; i--) { + uint32_t data_ptr = readl(&fec->rbd_base[i].data_pointer); + free((void *)data_ptr); + } + + return -ENOMEM; }
/** @@ -312,9 +333,13 @@ static int fec_rbd_init(struct fec_priv *fec, int count, int size) */ static void fec_tbd_init(struct fec_priv *fec) { + unsigned addr = (unsigned)fec->tbd_base; + unsigned size = roundup(2 * sizeof(struct fec_bd), + ARCH_DMA_MINALIGN); writew(0x0000, &fec->tbd_base[0].status); writew(FEC_TBD_WRAP, &fec->tbd_base[1].status); fec->tbd_index = 0; + flush_dcache_range(addr, addr+size); }
/** @@ -324,16 +349,10 @@ static void fec_tbd_init(struct fec_priv *fec) */ static void fec_rbd_clean(int last, struct fec_bd *pRbd) { - /* - * Reset buffer descriptor as empty - */ + unsigned short flags = FEC_RBD_EMPTY; if (last) - writew(FEC_RBD_WRAP | FEC_RBD_EMPTY, &pRbd->status); - else - writew(FEC_RBD_EMPTY, &pRbd->status); - /* - * no data in it - */ + flags |= FEC_RBD_WRAP; + writew(flags, &pRbd->status); writew(0, &pRbd->data_length); }
@@ -387,12 +406,25 @@ static int fec_open(struct eth_device *edev) { struct fec_priv *fec = (struct fec_priv *)edev->priv; int speed; + uint32_t addr, size; + int i;
debug("fec_open: fec_open(dev)\n"); /* full-duplex, heartbeat disabled */ writel(1 << 2, &fec->eth->x_cntrl); fec->rbd_index = 0;
+ /* Invalidate all descriptors */ + for (i = 0; i < FEC_RBD_NUM - 1; i++) + fec_rbd_clean(0, &fec->rbd_base[i]); + fec_rbd_clean(1, &fec->rbd_base[i]); + + /* Flush the descriptors into RAM */ + size = roundup(FEC_RBD_NUM * sizeof(struct fec_bd), + ARCH_DMA_MINALIGN); + addr = (uint32_t)fec->rbd_base; + flush_dcache_range(addr, addr + size); + #ifdef FEC_QUIRK_ENET_MAC /* Enable ENET HW endian SWAP */ writel(readl(&fec->eth->ecntrl) | FEC_ECNTRL_DBSWAP, @@ -478,38 +510,55 @@ static int fec_open(struct eth_device *edev)
static int fec_init(struct eth_device *dev, bd_t* bd) { - uint32_t base; struct fec_priv *fec = (struct fec_priv *)dev->priv; uint32_t mib_ptr = (uint32_t)&fec->eth->rmon_t_drop; uint32_t rcntrl; - int i; + uint32_t size; + int i, ret;
/* Initialize MAC address */ fec_set_hwaddr(dev);
/* - * reserve memory for both buffer descriptor chains at once - * Datasheet forces the startaddress of each chain is 16 byte - * aligned + * Allocate transmit descriptors, there are two in total. This + * allocation respects cache alignment. */ - if (fec->base_ptr == NULL) - fec->base_ptr = malloc((2 + FEC_RBD_NUM) * - sizeof(struct fec_bd) + DB_ALIGNMENT); - base = (uint32_t)fec->base_ptr; - if (!base) { - puts("fec_mxc: not enough malloc memory\n"); - return -ENOMEM; + if (!fec->tbd_base) { + size = roundup(2 * sizeof(struct fec_bd), + ARCH_DMA_MINALIGN); + fec->tbd_base = memalign(ARCH_DMA_MINALIGN, size); + if (!fec->tbd_base) { + ret = -ENOMEM; + goto err1; + } + memset(fec->tbd_base, 0, size); + fec_tbd_init(fec); + flush_dcache_range((unsigned)fec->tbd_base, size); } - memset((void *)base, 0, (2 + FEC_RBD_NUM) * - sizeof(struct fec_bd) + DB_ALIGNMENT); - base += (DB_ALIGNMENT-1); - base &= ~(DB_ALIGNMENT-1); - - fec->rbd_base = (struct fec_bd *)base;
- base += FEC_RBD_NUM * sizeof(struct fec_bd); - - fec->tbd_base = (struct fec_bd *)base; + /* + * Allocate receive descriptors. This allocation respects cache + * alignment. + */ + if (!fec->rbd_base) { + size = roundup(FEC_RBD_NUM * sizeof(struct fec_bd), + ARCH_DMA_MINALIGN); + fec->rbd_base = memalign(ARCH_DMA_MINALIGN, size); + if (!fec->rbd_base) { + ret = -ENOMEM; + goto err2; + } + memset(fec->rbd_base, 0, size); + /* + * Initialize RxBD ring + */ + if (fec_rbd_init(fec, FEC_RBD_NUM, FEC_MAX_PKT_SIZE) < 0) { + ret = -ENOMEM; + goto err3; + } + flush_dcache_range((unsigned)fec->rbd_base, + (unsigned)fec->rbd_base + size); + }
/* * Set interrupt mask register @@ -566,23 +615,19 @@ static int fec_init(struct eth_device *dev, bd_t* bd) writel((uint32_t)fec->tbd_base, &fec->eth->etdsr); writel((uint32_t)fec->rbd_base, &fec->eth->erdsr);
- /* - * Initialize RxBD/TxBD rings - */ - if (fec_rbd_init(fec, FEC_RBD_NUM, FEC_MAX_PKT_SIZE) < 0) { - free(fec->base_ptr); - fec->base_ptr = NULL; - return -ENOMEM; - } - fec_tbd_init(fec); - - #ifndef CONFIG_PHYLIB if (fec->xcv_type != SEVENWIRE) miiphy_restart_aneg(dev); #endif fec_open(dev); return 0; + +err3: + free(fec->rbd_base); +err2: + free(fec->tbd_base); +err1: + return ret; }
/** @@ -631,9 +676,11 @@ static void fec_halt(struct eth_device *dev) * @param[in] length Data count in bytes * @return 0 on success */ -static int fec_send(struct eth_device *dev, volatile void* packet, int length) +static int fec_send(struct eth_device *dev, volatile void *packet, int length) { unsigned int status; + uint32_t size; + uint32_t addr;
/* * This routine transmits one frame. This routine only accepts @@ -650,15 +697,21 @@ static int fec_send(struct eth_device *dev, volatile void* packet, int length) }
/* - * Setup the transmit buffer - * Note: We are always using the first buffer for transmission, - * the second will be empty and only used to stop the DMA engine + * Setup the transmit buffer. We are always using the first buffer for + * transmission, the second will be empty and only used to stop the DMA + * engine. We also flush the packet to RAM here to avoid cache trouble. */ -#ifdef CONFIG_FEC_MXC_SWAP_PACKET +#ifdef CONFIG_FEC_MXC_SWAP_PACKET swap_packet((uint32_t *)packet, length); #endif + + addr = (uint32_t)packet; + size = roundup(length, ARCH_DMA_MINALIGN); + flush_dcache_range(addr, addr + size); + writew(length, &fec->tbd_base[fec->tbd_index].data_length); - writel((uint32_t)packet, &fec->tbd_base[fec->tbd_index].data_pointer); + writel(addr, &fec->tbd_base[fec->tbd_index].data_pointer); + /* * update BD's status now * This block: @@ -672,16 +725,30 @@ static int fec_send(struct eth_device *dev, volatile void* packet, int length) writew(status, &fec->tbd_base[fec->tbd_index].status);
/* + * Flush data cache. This code flushes both TX descriptors to RAM. + * After this code, the descriptors will be safely in RAM and we + * can start DMA. + */ + size = roundup(2 * sizeof(struct fec_bd), ARCH_DMA_MINALIGN); + addr = (uint32_t)fec->tbd_base; + flush_dcache_range(addr, addr + size); + + /* * Enable SmartDMA transmit task */ fec_tx_task_enable(fec);
/* - * wait until frame is sent . + * Wait until frame is sent. On each turn of the wait cycle, we must + * invalidate data cache to see what's really in RAM. Also, we need + * barrier here. */ + invalidate_dcache_range(addr, addr + size); while (readw(&fec->tbd_base[fec->tbd_index].status) & FEC_TBD_READY) { udelay(1); + invalidate_dcache_range(addr, addr + size); } + debug("fec_send: status 0x%x index %d\n", readw(&fec->tbd_base[fec->tbd_index].status), fec->tbd_index); @@ -707,6 +774,8 @@ static int fec_recv(struct eth_device *dev) int frame_length, len = 0; struct nbuf *frame; uint16_t bd_status; + uint32_t addr, size; + int i; uchar buff[FEC_MAX_PKT_SIZE];
/* @@ -737,8 +806,23 @@ static int fec_recv(struct eth_device *dev) }
/* - * ensure reading the right buffer status + * Read the buffer status. Before the status can be read, the data cache + * must be invalidated, because the data in RAM might have been changed + * by DMA. The descriptors are properly aligned to cachelines so there's + * no need to worry they'd overlap. + * + * WARNING: By invalidating the descriptor here, we also invalidate + * the descriptors surrounding this one. Therefore we can NOT change the + * contents of this descriptor nor the surrounding ones. The problem is + * that in order to mark the descriptor as processed, we need to change + * the descriptor. The solution is to mark the whole cache line when all + * descriptors in the cache line are processed. */ + addr = (uint32_t)rbd; + addr &= ~(ARCH_DMA_MINALIGN - 1); + size = roundup(sizeof(struct fec_bd), ARCH_DMA_MINALIGN); + invalidate_dcache_range(addr, addr + size); + bd_status = readw(&rbd->status); debug("fec_recv: status 0x%x\n", bd_status);
@@ -751,9 +835,16 @@ static int fec_recv(struct eth_device *dev) frame = (struct nbuf *)readl(&rbd->data_pointer); frame_length = readw(&rbd->data_length) - 4; /* + * Invalidate data cache over the buffer + */ + addr = (uint32_t)frame; + size = roundup(frame_length, ARCH_DMA_MINALIGN); + invalidate_dcache_range(addr, addr + size); + + /* * Fill the buffer and pass it to upper layers */ -#ifdef CONFIG_FEC_MXC_SWAP_PACKET +#ifdef CONFIG_FEC_MXC_SWAP_PACKET swap_packet((uint32_t *)frame->data, frame_length); #endif memcpy(buff, frame->data, frame_length); @@ -765,11 +856,25 @@ static int fec_recv(struct eth_device *dev) (ulong)rbd->data_pointer, bd_status); } + /* - * free the current buffer, restart the engine - * and move forward to the next buffer + * Free the current buffer, restart the engine and move forward + * to the next buffer. Here we check if the whole cacheline of + * descriptors was already processed and if so, we mark it free + * as whole. */ - fec_rbd_clean(fec->rbd_index == (FEC_RBD_NUM - 1) ? 1 : 0, rbd); + size = RXDESC_PER_CACHELINE - 1; + if ((fec->rbd_index & size) == size) { + i = fec->rbd_index - size; + addr = (uint32_t)&fec->rbd_base[i]; + for (; i <= fec->rbd_index ; i++) { + fec_rbd_clean(i == (FEC_RBD_NUM - 1), + &fec->rbd_base[i]); + } + flush_dcache_range(addr, + addr + ARCH_DMA_MINALIGN); + } + fec_rx_task_enable(fec); fec->rbd_index = (fec->rbd_index + 1) % FEC_RBD_NUM; } @@ -866,7 +971,7 @@ static int fec_probe(bd_t *bd, int dev_id, int phy_id, uint32_t base_addr) bus->read = fec_phy_read; bus->write = fec_phy_write; sprintf(bus->name, edev->name); -#ifdef CONFIG_MX28 +#ifdef CONFIG_MX28 /* * The i.MX28 has two ethernet interfaces, but they are not equal. * Only the first one can access the MDIO bus. @@ -901,7 +1006,7 @@ err1: return ret; }
-#ifndef CONFIG_FEC_MXC_MULTI +#ifndef CONFIG_FEC_MXC_MULTI int fecmxc_initialize(bd_t *bd) { int lout = 1; diff --git a/drivers/net/fec_mxc.h b/drivers/net/fec_mxc.h index 2eb7803..852b2e0 100644 --- a/drivers/net/fec_mxc.h +++ b/drivers/net/fec_mxc.h @@ -234,22 +234,6 @@ struct ethernet_regs { #endif
/** - * @brief Descriptor buffer alignment - * - * i.MX27 requires a 16 byte alignment (but for the first element only) - */ -#define DB_ALIGNMENT 16 - -/** - * @brief Data buffer alignment - * - * i.MX27 requires a four byte alignment for transmit and 16 bits - * alignment for receive so take 16 - * Note: Valid for member data_pointer in struct buffer_descriptor - */ -#define DB_DATA_ALIGNMENT 16 - -/** * @brief Receive & Transmit Buffer Descriptor definitions * * Note: The first BD must be aligned (see DB_ALIGNMENT) @@ -282,8 +266,7 @@ struct fec_priv { struct fec_bd *tbd_base; /* TBD ring */ int tbd_index; /* next transmit BD to write */ bd_t *bd; - void *rdb_ptr; - void *base_ptr; + uint8_t *tdb_ptr; int dev_id; int phy_id; struct mii_dev *bus;