Am 06.04.2013 02:55, schrieb Fabio Estevam:
From: Fabio Estevam fabio.estevam@freescale.com
mx6slevk board is a development board from Freescale based on the mx6 solo-lite processor.
For details about mx6slevk, please refer to: http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=IMX6SLEVK&...
Signed-off-by: Fabio Estevam fabio.estevam@freescale.com
diff --git a/board/freescale/mx6slevk/imximage.cfg b/board/freescale/mx6slevk/imximage.cfg new file mode 100644 index 0000000..df39a16 --- /dev/null +++ b/board/freescale/mx6slevk/imximage.cfg @@ -0,0 +1,118 @@ +/*
- Copyright (C) 2013 Freescale Semiconductor, Inc.
- This program is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License as
- published by the Free Software Foundation; either version 2 of
- the License or (at your option) any later version.
- Refer docs/README.imxmage for more details about how-to configure
- and create imximage boot image
- The syntax is taken as close as possible with the kwbimage
- */
+/* image version */
+IMAGE_VERSION 2
+/*
- Boot Device : one of
- spi, sd (the board has no nand neither onenand)
- */
+BOOT_FROM sd
+/*
- Device Configuration Data (DCD)
- Each entry must have the format:
- Addr-type Address Value
- where:
- Addr-type register length (1,2 or 4 bytes)
- Address absolute address of the register
- value value to be stored in the register
- */
+DATA 4 0x020c4018 0x00260324
+DATA 4 0x020c4068 0xffffffff +DATA 4 0x020c406c 0xffffffff +DATA 4 0x020c4070 0xffffffff +DATA 4 0x020c4074 0xffffffff +DATA 4 0x020c4078 0xffffffff +DATA 4 0x020c407c 0xffffffff +DATA 4 0x020c4080 0xffffffff
Again this default stuff? ;)
Best regards
Dirk