[U-Boot] [PATCH v4 3/7] arch/arm/dts: Add Turris Omnia device tree

This device tree is taken from mainline Linux kernel commit 7b7db5ab. Added is also a -u-boot.dtsi file with these additions:

- aliases for I2C and SPI devices are added, because i2cmux and SPI flash doesn't work otherwise - spi_flash node has been added so that the new DM API works - the ATSHA204A node is added in the i2c@5 node - "u-boot,dm-pre-reloc"s are added in needed nodes for SPL build to work correctly

Signed-off-by: Marek Behun marek.behun@nic.cz

create mode 100644 arch/arm/dts/armada-385-turris-omnia-u-boot.dtsi create mode 100644 arch/arm/dts/armada-385-turris-omnia.dts

diff --git a/arch/arm/dts/armada-385-turris-omnia-u-boot.dtsi b/arch/arm/dts/armada-385-turris-omnia-u-boot.dtsi new file mode 100644 index 0000000000..22caf3539c --- /dev/null +++ b/arch/arm/dts/armada-385-turris-omnia-u-boot.dtsi @@ -0,0 +1,55 @@ +/* + * Copyright (C) 2017 Marek Behun marek.behun@nic.cz + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +/ { + aliases { + i2c0 = &i2c0; + i2c1 = &i2cmux; + spi0 = &spi0; + }; +}; + +&i2c0 { + u-boot,dm-pre-reloc; + + i2cmux: i2cmux@70 { + u-boot,dm-pre-reloc; + + i2c@0 { + u-boot,dm-pre-reloc; + }; + + i2c@1 { + u-boot,dm-pre-reloc; + }; + + i2c@5 { + u-boot,dm-pre-reloc; + + /* ATSHA204A at address 0x64 */ + atsha204a@64 { + u-boot,dm-pre-reloc; + compatible = "atmel,atsha204a"; + reg = <0x64>; + }; + }; + }; +}; + +&spi0 { + u-boot,dm-pre-reloc; + + spi-flash@0 { + compatible = "spi-flash"; + reg = <0>; + spi-max-frequency = <40000000>; + u-boot,dm-pre-reloc; + }; +}; + +&uart0 { + u-boot,dm-pre-reloc; +}; diff --git a/arch/arm/dts/armada-385-turris-omnia.dts b/arch/arm/dts/armada-385-turris-omnia.dts new file mode 100644 index 0000000000..28eede180e --- /dev/null +++ b/arch/arm/dts/armada-385-turris-omnia.dts @@ -0,0 +1,392 @@ +/* + * Device Tree file for the Turris Omnia + * + * Copyright (C) 2016 Uwe Kleine-König uwe@kleine-koenig.org + * Copyright (C) 2016 Tomas Hlavacek tmshlvkc@gmail.com + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/* + * Schematic available at https://www.turris.cz/doc/_media/rtrom01-schema.pdf + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "armada-385.dtsi" + +/ { + model = "Turris Omnia"; + compatible = "cznic,turris-omnia", "marvell,armada385", "marvell,armada380"; + + chosen { + stdout-path = &uart0; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x40000000>; /* 1024 MB */ + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000 + MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000 + MBUS_ID(0x09, 0x19) 0 0xf1100000 0x10000 + MBUS_ID(0x09, 0x15) 0 0xf1110000 0x10000>; + + internal-regs { + + /* USB part of the PCIe2/USB 2.0 port */ + usb@58000 { + status = "okay"; + }; + + sata@a8000 { + status = "okay"; + }; + + sdhci@d8000 { + pinctrl-names = "default"; + pinctrl-0 = <&sdhci_pins>; + status = "okay"; + + bus-width = <8>; + no-1-8-v; + non-removable; + }; + + usb3@f0000 { + status = "okay"; + }; + + usb3@f8000 { + status = "okay"; + }; + }; + + pcie-controller { + status = "okay"; + + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + + pcie@2,0 { + /* Port 1, Lane 0 */ + status = "okay"; + }; + + pcie@3,0 { + /* Port 2, Lane 0 */ + status = "okay"; + }; + }; + }; +}; + +/* Connected to 88E6176 switch, port 6 */ +&eth0 { + pinctrl-names = "default"; + pinctrl-0 = <&ge0_rgmii_pins>; + status = "okay"; + phy-mode = "rgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +/* Connected to 88E6176 switch, port 5 */ +&eth1 { + pinctrl-names = "default"; + pinctrl-0 = <&ge1_rgmii_pins>; + status = "okay"; + phy-mode = "rgmii"; + + fixed-link { + speed = <1000>; + full-duplex; + }; +}; + +/* WAN port */ +&eth2 { + status = "okay"; + phy-mode = "sgmii"; + phy = <&phy1>; +}; + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "okay"; + + i2cmux@70 { + compatible = "nxp,pca9547"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x70>; + status = "okay"; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + /* STM32F0 command interface at address 0x2a */ + /* leds device (in STM32F0) at address 0x2b */ + + eeprom@54 { + compatible = "at,24c64"; + reg = <0x54>; + + /* The EEPROM contains data for bootloader. + * Contents: + * struct omnia_eeprom { + * u32 magic; (=0x0341a034 in LE) + * u32 ramsize; (in GiB) + * char regdomain[4]; + * u32 crc32; + * }; + */ + }; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + /* routed to PCIe0/mSATA connector (CN7A) */ + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <2>; + + /* routed to PCIe1/USB2 connector (CN61A) */ + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <3>; + + /* routed to PCIe2 connector (CN62A) */ + }; + + i2c@4 { + #address-cells = <1>; + #size-cells = <0>; + reg = <4>; + + /* routed to SFP+ */ + }; + + i2c@5 { + #address-cells = <1>; + #size-cells = <0>; + reg = <5>; + + /* ATSHA204A at address 0x64 */ + }; + + i2c@6 { + #address-cells = <1>; + #size-cells = <0>; + reg = <6>; + + /* exposed on pin header */ + }; + + i2c@7 { + #address-cells = <1>; + #size-cells = <0>; + reg = <7>; + + pcawan: gpio@71 { + /* + * GPIO expander for SFP+ signals and + * and phy irq + */ + compatible = "nxp,pca9538"; + reg = <0x71>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcawan_pins>; + + interrupt-parent = <&gpio1>; + interrupts = <14 IRQ_TYPE_LEVEL_LOW>; + + gpio-controller; + #gpio-cells = <2>; + }; + }; + }; +}; + +&mdio { + pinctrl-names = "default"; + pinctrl-0 = <&mdio_pins>; + status = "okay"; + + phy1: phy@1 { + status = "okay"; + compatible = "ethernet-phy-id0141.0DD1", "ethernet-phy-ieee802.3-c22"; + reg = <1>; + + /* irq is connected to &pcawan pin 7 */ + }; + + /* Switch MV88E6176 at address 0x10 */ + switch@10 { + compatible = "marvell,mv88e6085"; + #address-cells = <1>; + #size-cells = <0>; + dsa,member = <0 0>; + + reg = <0x10>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + ports@0 { + reg = <0>; + label = "lan0"; + }; + + ports@1 { + reg = <1>; + label = "lan1"; + }; + + ports@2 { + reg = <2>; + label = "lan2"; + }; + + ports@3 { + reg = <3>; + label = "lan3"; + }; + + ports@4 { + reg = <4>; + label = "lan4"; + }; + + ports@5 { + reg = <5>; + label = "cpu"; + ethernet = <&eth1>; + phy-mode = "rgmii-id"; + + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + /* port 6 is connected to eth0 */ + }; + }; +}; + +&pinctrl { + pcawan_pins: pcawan-pins { + marvell,pins = "mpp46"; + marvell,function = "gpio"; + }; + + spi0cs0_pins: spi0cs0-pins { + marvell,pins = "mpp25"; + marvell,function = "spi0"; + }; + + spi0cs1_pins: spi0cs1-pins { + marvell,pins = "mpp26"; + marvell,function = "spi0"; + }; +}; + +&spi0 { + pinctrl-names = "default"; + pinctrl-0 = <&spi0_pins &spi0cs0_pins>; + status = "okay"; + + spi-nor@0 { + compatible = "spansion,s25fl164k", "jedec,spi-nor"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0>; + spi-max-frequency = <40000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + reg = <0x0 0x00100000>; + label = "U-Boot"; + }; + + partition@100000 { + reg = <0x00100000 0x00700000>; + label = "Rescue system"; + }; + }; + }; + + /* MISO, MOSI, SCLK and CS1 are routed to pin header CN11 */ +}; + +&uart0 { + /* Pin header CN10 */ + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pins>; + status = "okay"; +}; + +&uart1 { + /* Pin header CN11 */ + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; + status = "okay"; +};